25.140 : Hand-held tools

Items 601 to 800 of 1826 total

Set Ascending Direction
per page

List  Grid 

  • ISO 2725-3:2017 (R2023)

    Assembly tools for screws and nuts
    Square drive sockets
    6/1/2017 - Paper - English - ISO
    Learn More
    €48.00

  • NF EN 62841-3-13, C75-841-3-13 (06/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13 : particular requirements for transportable drills -
    6/1/2017 - Paper - French - AFNOR
    Learn More
    €103.00

  • NF EN 62841-2-10, C75-841-2-10 (06/2017)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10 : particular requirements for hand held mixers - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-10 : Exigences particulières pour les mélangeurs
    6/1/2017 - Paper - French - AFNOR
    Learn More
    €103.33

  • NF E74-306 (06/2017)

    Assembly tools for screws and nuts - Clearance for wrench assembly
    6/1/2017 - Paper - French - AFNOR
    Learn More
    €34.67

  • ISO 2725-1:2017 (R2023)

    Assembly tools for screws and nuts
    Square drive sockets
    6/1/2017 - Paper - French - ISO
    Learn More
    €72.00

  • ISO 2725-1:2017 (R2023)

    Assembly tools for screws and nuts
    Square drive sockets
    6/1/2017 - Paper - English - ISO
    Learn More
    €72.00

  • IEC 62841-2-21:2017

    IEC 62841-2-21:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners
    5/23/2017 - PDF - English, French - IEC
    Learn More
    €132.00

  • BS ISO 4229:2017

    Assembly tools for screws and nuts. Single-head engineer's wrenches for lower torque applications. Maximum outside dimensions of heads and test torques
    5/2/2017 - PDF - English - BSI
    Learn More
    €151.00

  • DIN EN 62841-2-8 VDE 0740-2-8:2017-05

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers (IEC 62841-2-8:2016, modified), German version EN 62841-2-8:2016
    5/1/2017 - Paper - German - VDE
    Learn More
    €53.63

  • NF EN ISO 6789-1, E74-325-1 (05/2017)

    Assembly tools for screws and nuts - Hand torque tools - Part 1 : Requirements and methods for design conformance testing and quality conformance testing : minimum requirements for declaration of conformance - Outils de manœuvre pour vis et écrous - Outils dynamométriques à commande manuelle - Exigences et méthodes d'essai pour vérifier la conformité de conception, la conformité de qualité et la procédure de réétalonnage
    5/1/2017 - Paper - French - AFNOR
    Learn More
    €86.50

  • NF EN ISO 6789-2, E74-325-2 (05/2017)

    Assembly tools for screws and nuts - Hand torque tools - Part 2 : Requirements for calibration and determination of measurement uncertainly
    5/1/2017 - Paper - French - AFNOR
    Learn More
    €108.00

  • NF ISO 529, E66-103 (05/2017)

    Short machine taps and hand taps
    5/1/2017 - Paper - French - AFNOR
    Learn More
    €83.85

  • NBN EN ISO 6789-2:2017

    Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017)
    4/19/2017 - PDF - French - NBN
    Learn More
    €163.00

  • NBN EN ISO 6789-2:2017

    Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017)
    4/19/2017 - PDF - German - NBN
    Learn More
    €163.00

  • NBN EN ISO 6789-2:2017

    Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017)
    4/19/2017 - PDF - English - NBN
    Learn More
    €163.00

  • NBN EN ISO 6789-1:2017

    Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017)
    4/19/2017 - PDF - French - NBN
    Learn More
    €121.00

  • NBN EN ISO 6789-1:2017

    Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017)
    4/19/2017 - PDF - German - NBN
    Learn More
    €121.00

  • NBN EN ISO 6789-1:2017

    Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017)
    4/19/2017 - PDF - English - NBN
    Learn More
    €121.00

  • ISO 4229:2017 (R2023)

    Assembly tools for screws and nuts
    Single-head engineer's wrenches for lower torque applications
    4/4/2017 - Paper - French - ISO
    Learn More
    €48.00

  • ISO 4229:2017 (R2023)

    Assembly tools for screws and nuts
    Single-head engineer's wrenches for lower torque applications
    4/4/2017 - Paper - English - ISO
    Learn More
    €48.00

  • DIN EN 50632-2-3 VDE 0740-632-2-3:2017-04

    Electric motor-operated tools - Dust measurement procedure - Part 2-3: Particular requirements for concrete grinders and disk-type sanders, German version EN 50632-2-3:2016
    4/1/2017 - Paper - German - VDE
    Learn More
    €45.89

  • DIN EN 50632-2-4 VDE 0740-632-2-4:2017-04

    Electric motor-operated tools - Dust measurement procedure - Part 2-4: Particular requirements for sanders other than disk type, German version EN 50632-2-4:2016
    4/1/2017 - Paper - German - VDE
    Learn More
    €42.45

  • DIN EN 50632-2-11 VDE 0740-632-2-11:2017-04

    Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws, German version EN 50632-2-11:2016
    4/1/2017 - Paper - German - VDE
    Learn More
    €29.12

  • DIN EN 50632-2-17 VDE 0740-632-2-17:2017-04

    Electric motor-operated tools - Dust measurement procedure - Part 2-17: Particular requirements for routers and trimmers, German version EN 50632-2-17:2016
    4/1/2017 - Paper - German - VDE
    Learn More
    €29.12

  • DIN EN 50632-2-14 VDE 0740-632-2-14:2017-04

    Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers, German version EN 50632-2-14:2016
    4/1/2017 - Paper - German - VDE
    Learn More
    €29.12

  • DIN EN 50632-2-19 VDE 0740-632-2-19:2017-04

    Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers, German version EN 50632-2-19:2016
    4/1/2017 - Paper - German - VDE
    Learn More
    €29.12

  • DIN EN 62841-2-11/A1 VDE 0740-2-11/A1:2017-04

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (IEC 116/310/CDV:2017), German version EN 62841-2-11:2016/prA1:2017
    4/1/2017 - Paper - German - VDE
    Learn More
    €14.40

  • DIN 3119:2017-04

    Four-way socket wrenches - Test torques series A
    4/1/2017 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 3122:2017-04

    Driving parts for hand operated square drive socket wrenches
    4/1/2017 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 3123:2017-04

    Attachments for hand operated square drive socket wrenches
    4/1/2017 - PDF - German - DIN
    Learn More
    €45.98

  • BS EN ISO 6789-1:2017

    Assembly tools for screws and nuts. Hand torque Requirements methods design conformance testing quality testing: minimum requirements declaration of
    3/31/2017 - PDF - English - BSI
    Learn More
    €293.00

  • BS EN ISO 6789-2:2017

    Assembly tools for screws and nuts. Hand torque Requirements calibration determination of measurement uncertainty
    3/31/2017 - PDF - English - BSI
    Learn More
    €348.00

  • SAE AS 22520/3D:2021-12-27

    CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, INSPECTION GAGE FOR TYPE I AND II TOOLS
    3/21/2017 - PDF - English - SAE
    Learn More
    €54.00

  • UNE-EN 62841-3-4:2016/AC:2017-01

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (Endorsed by Asociación Española de Normalización in March of 2017.)
    3/1/2017 - PDF - English - AENOR
    Learn More
    €0.00

  • NF ISO 1085, E74-305 (03/2017)

    Assembly tools for screws and nuts - Double-ended wrenches - Size pairing
    3/1/2017 - Paper - French - AFNOR
    Learn More
    €33.62

  • NF ISO 3318, E74-304 (03/2017)

    Assembly tools for screws and nuts - Open-ended wrenches, box wrenches and combination wrenches - Maximum widths of heads - Outils de manoeuvre pour vis et écrous - Clés à fourche doubles, clés polygonales doubles et clés mixtes - Largeurs maximales d'encombrement des têtes
    3/1/2017 - Paper - French - AFNOR
    Learn More
    €33.62

  • ISO 6789-1:2017

    Assembly tools for screws and nuts
    Hand torque tools
    2/23/2017 - Paper - French - ISO
    Learn More
    €148.00

  • ISO 6789-2:2017

    Assembly tools for screws and nuts
    Hand torque tools
    2/23/2017 - Paper - French - ISO
    Learn More
    €199.00

  • ISO 6789-1:2017

    Assembly tools for screws and nuts
    Hand torque tools
    2/23/2017 - Paper - English - ISO
    Learn More
    €148.00

  • ISO 6789-2:2017

    Assembly tools for screws and nuts
    Hand torque tools
    2/23/2017 - Paper - English - ISO
    Learn More
    €199.00

  • IEC 62841-3-13:2017

    IEC 62841-3-13:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills
    2/21/2017 - PDF - English, French - IEC
    Learn More
    €270.00

  • IEC 62841-2-10:2017

    IEC 62841-2-10:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers
    2/10/2017 - PDF - English, French - IEC
    Learn More
    €173.00

  • NF EN 60745-2-3/A12, C75-745-2-3/A12 (02/2017)

    Hand-held motor-operated electric tools - Safety - Part 2-3 : particular requirements for grinders, polishers and disk-type sanders
    2/1/2017 - Paper - French - AFNOR
    Learn More
    €40.33

  • UNE-EN 50632-3-3:2017 (R2021)

    Electric motor-operated tools - Dust measurement procedure - Part 3-3: Particular requirements for transportable planers and thicknessers (Endorsed by Asociación Española de Normalización in February of 2017.)
    2/1/2017 - PDF - English - AENOR
    Learn More
    €35.00

  • DIN 87311:2017-02

    Handwheel wrenches
    2/1/2017 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 87314:2017-02

    Male square wrenches for drain screws
    2/1/2017 - PDF - German - DIN
    Learn More
    €32.34

  • SAE AS 22520/45A:2021-12-27

    CRIMPING TOOLS, TYPE I, HAND, WIRE, TERMINATION FOR WIRE BARREL SIZE 10 POWER CONTACTS
    2/1/2017 - PDF - English - SAE
    Learn More
    €54.00

  • SAE AS 4786B:2017-01-04

    Driver Drills, Battery Powered (Stabilized: Jan 2017)
    1/4/2017 - PDF - English - SAE
    Learn More
    €70.00

  • NF EN ISO 4230, E66-154 (01/2017)

    Hand - and machine-operated circular screwing dies for taper pipe threads - R series
    1/1/2017 - Paper - French - AFNOR
    Learn More
    €33.62

  • BS ISO 3318:2016

    Assembly tools for screws and nuts. Open-ended wrenches, box wrenches and combination wrenches. Maximum widths of heads
    12/31/2016 - PDF - English - BSI
    Learn More
    €151.00

  • BS ISO 1085:2016

    Assembly tools for screws and nuts. Double-ended wrenches. Size pairing
    12/31/2016 - PDF - English - BSI
    Learn More
    €151.00

  • 16/30321757 DC:2016

    BS ISO 28927-13. Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 13. Fastener driving tools
    12/21/2016 - PDF - English - BSI
    Learn More
    €24.00

  • ISO 3318:2016 (R2022)

    Assembly tools for screws and nuts
    Open-ended wrenches, box wrenches and combination wrenches
    12/8/2016 - Paper - French - ISO
    Learn More
    €48.00

  • ISO 1085:2016 (R2022)

    Assembly tools for screws and nuts
    Double-ended wrenches
    12/8/2016 - Paper - French - ISO
    Learn More
    €48.00

  • ISO 3318:2016 (R2022)

    Assembly tools for screws and nuts
    Open-ended wrenches, box wrenches and combination wrenches
    12/8/2016 - Paper - English - ISO
    Learn More
    €48.00

  • ISO 1085:2016 (R2022)

    Assembly tools for screws and nuts
    Double-ended wrenches
    12/8/2016 - Paper - English - ISO
    Learn More
    €48.00

  • UNE-EN 62841-2-9:2015/AC:2016-10

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
    12/7/2016 - PDF - Spanish - AENOR
    Learn More
    €0.00

  • UNE-EN 62841-2-9:2015/AC:2016-10

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
    12/7/2016 - PDF - English - AENOR
    Learn More
    €0.00

  • DIN EN 62841-2-11 VDE 0740-2-11:2016-12

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (IEC 62841-2-11:2015, modified), German version EN 62841-2-11:2016
    12/1/2016 - Paper - German - VDE
    Learn More
    €84.90

  • NF EN 62841-2-8, C75-841-2-8 (12/2016)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8 : particular requirements for hand-held shears and nibblers - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-8 : Exigences particulières relatives aux cisailles et grignoteuses portatives
    12/1/2016 - Paper - French - AFNOR
    Learn More
    €88.33

  • NF EN 60745-2-3/A11, C75-745-2-3/A11 (12/2016)

    Hand-held motor-operated electric tools - Safety - Part 2-3 : Particular requirements for grinders, polishers and disk-type sanders - Outils électroportatifs à moteur
    12/1/2016 - Paper - French - AFNOR
    Learn More
    €40.33

  • BS EN 62841-2-8:2016

    Electric motor-operated hand-held tools, transportable tools and lawn garden machinery. Safety Particular requirements for shears nibblers
    11/30/2016 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN 62841-2-9:2015

    Electric motor-operated hand-held tools, transportable tools and lawn garden machinery. Safety Particular requirements for tappers threaders
    11/30/2016 - PDF - English - BSI
    Learn More
    €250.00

  • SAE AS 22520/35:2021-12-27

    CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, IN-SERVICE INSPECTION GAGES FOR AS22520/34 CRIMP TOOLS
    11/14/2016 - PDF - English - SAE
    Learn More
    €39.00

  • SAE AS 22520/41:2023-10-03

    CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, TYPE II FOR TERMINALS AND SPLICES SIZE 10-12
    11/14/2016 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 22520/43:2023-10-03

    CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, IN-SERVICE INSPECTION GAGE FOR AS22520/40 CRIMP TOOLS
    11/14/2016 - PDF - English - SAE
    Learn More
    €39.00

  • NF EN 50632-2-14, C75-132-2-14 (11/2016)

    Electric motor-operated tools - Dust measurement procedure - Part 2-14 : particular requirements for planers
    11/1/2016 - Paper - French - AFNOR
    Learn More
    €53.12

  • NF EN 50632-2-17, C75-132-2-17 (11/2016)

    Electric motor-operated tools - Dust measurement procedure - Part 2-17 : particular requirements for routers and trimmers - Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-17 : Exigences particulières pour les défonceuses et affleureuses
    11/1/2016 - Paper - French - AFNOR
    Learn More
    €69.60

  • NF EN 50632-2-5, C75-132-2-5 (11/2016)

    Electric motor-operated tools - Dust measurement procedure - Part 2-5 : particular requirements for circular saws
    11/1/2016 - Paper - French - AFNOR
    Learn More
    €54.50

  • NF EN 50632-2-11, C75-132-2-11 (11/2016)

    Electric motor-operated tools - Dust measurement procedure - Part 2-11 : particular requirements for jig and sabre saws
    11/1/2016 - Paper - French - AFNOR
    Learn More
    €54.50

  • NF EN 50632-2-19, C75-132-2-19 (11/2016)

    Electric motor-operated tools - Dust measurement procedure - Part 2-19 : particular requirements for jointers
    11/1/2016 - Paper - French - AFNOR
    Learn More
    €53.12

  • UNE-EN 62841-3-9:2015/AC:2016-09

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (Endorsed by AENOR in November of 2016.)
    11/1/2016 - PDF - English - AENOR
    Learn More
    €0.00

  • UNE-EN 62841-2-8:2016

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers (Endorsed by AENOR in November of 2016.)
    11/1/2016 - PDF - English - AENOR
    Learn More
    €59.00

  • DIN 6397:2016-11

    Floortiling trowel
    11/1/2016 - PDF - German - DIN
    Learn More
    €32.34

  • NF EN 50632-2-4, C75-132-2-4 (10/2016)

    Electric motor-operated tools - Dust measurement procedure - Part 2-4 : particular requirements for sanders other than disk type
    10/1/2016 - Paper - French - AFNOR
    Learn More
    €72.00

  • NF EN 50632-2-3, C75-132-2-3 (10/2016)

    Electric motor-operated tools - Dust measurement procedure - Part 2-3 : particular requirements for concrete grinders and disk-type sanders
    10/1/2016 - Paper - French - AFNOR
    Learn More
    €69.50

  • UNE-EN 50632-3-9:2016 (R2021)

    Electric motor-operated tools - Dust measurement procedure - Part 3-9: Particular requirements for transportable mitre saws (Endorsed by AENOR in October of 2016.)
    10/1/2016 - PDF - English - AENOR
    Learn More
    €24.00

  • DIN ISO 2936:2016-10

    Assembly tools for screws and nuts - Hexagon socket screw keys (ISO 2936:2014)
    10/1/2016 - PDF - German - DIN
    Learn More
    €52.90

  • VG 95236-4/A1:2016-10

    Tools for electrical components - Part 4: Inserting and extracting tools for contacts, detail standard, Amendment A1, Text in German and English
    10/1/2016 - PDF - English, German - DIN
    Learn More
    €39.35

  • VG 95236-11/A1:2016-10

    Tools for electrical components - Part 11: Crimping tools, hydraulic, detail standard, Amendment A1, Text in German and English
    10/1/2016 - PDF - English, German - DIN
    Learn More
    €40.90

  • DIN ISO 2936:2016-10

    Assembly tools for screws and nuts - Hexagon socket screw keys (ISO 2936:2014)
    10/1/2016 - PDF - English - DIN
    Learn More
    €66.07

  • UNE-EN 62841-3-10:2016/AC:2016-07

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
    9/28/2016 - PDF - Spanish - AENOR
    Learn More
    €0.00

  • UNE-EN 62841-3-10:2016/AC:2016-07

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
    9/28/2016 - PDF - English - AENOR
    Learn More
    €0.00

  • DIN EN 60745-2-3/A13 VDE 0740-2-3/A13:2016-09

    Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders, German version EN 60745-2-3:2011/A13:2015
    9/1/2016 - Paper - German - VDE
    Learn More
    €18.19

  • UNE-EN 50632-2-3:2016 (R2021)

    Electric motor-operated tools - Dust measurement procedure - Part 2-3: Particular requirements for concrete grinders and disk-type sanders (Endorsed by AENOR in September of 2016.)
    9/1/2016 - PDF - English - AENOR
    Learn More
    €46.00

  • UNE-EN 50632-2-17:2016 (R2021)

    Electric motor-operated tools - Dust measurement procedure - Part 2-17: Particular requirements for routers and trimmers (Endorsed by AENOR in September of 2016.)
    9/1/2016 - PDF - English - AENOR
    Learn More
    €28.00

  • UNE-EN 50632-2-11:2016 (R2021)

    Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws (Endorsed by AENOR in September of 2016.)
    9/1/2016 - PDF - English - AENOR
    Learn More
    €24.00

  • UNE-EN 50632-2-4:2016 (R2021)

    Electric motor-operated tools - Dust measurement procedure - Part 2-4: Particular requirements for sanders other than disk type (Endorsed by AENOR in September of 2016.)
    9/1/2016 - PDF - English - AENOR
    Learn More
    €42.00

  • UNE-EN 50632-2-14:2016 (R2021)

    Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers (Endorsed by AENOR in September of 2016.)
    9/1/2016 - PDF - English - AENOR
    Learn More
    €24.00

  • UNE-EN 50632-2-5:2016 (R2021)

    Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for circular saws (Endorsed by AENOR in September of 2016.)
    9/1/2016 - PDF - English - AENOR
    Learn More
    €24.00

  • UNE-EN 50632-2-19:2016 (R2021)

    Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers (Endorsed by AENOR in September of 2016.)
    9/1/2016 - PDF - English - AENOR
    Learn More
    €24.00

  • UNE-EN 50632-3-1:2016 (R2021)

    Electric motor-operated tools - Dust measurement procedure - Part 3-1: Particular requirements for transportable table saws (Endorsed by AENOR in September of 2016.)
    9/1/2016 - PDF - English - AENOR
    Learn More
    €24.00

  • VG 95236-18:2016-09

    Tools for electrical components - Part 18: Banding tools for ties, detail standard, Text in German and English.
    9/1/2016 - PDF - English, German - DIN
    Learn More
    €85.79

  • BS EN 50632-2-5:2016

    Electric motor-operated tools. Dust measurement procedure Particular requirements for circular saws
    8/31/2016 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN 50632-2-14:2016

    Electric motor-operated tools. Dust measurement procedure Particular requirements for planers
    8/31/2016 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN 50632-2-17:2016

    Electric motor-operated tools. Dust measurement procedure Particular requirements for routers and trimmers
    8/31/2016 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN 50632-2-19:2016

    Electric motor-operated tools. Dust measurement procedure Particular requirements for jointers
    8/31/2016 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN 50632-2-3:2016

    Electric motor-operated tools. Dust measurement procedure Particular requirements for concrete grinders and disk-type sanders
    8/31/2016 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN 50632-2-4:2016

    Electric motor-operated tools. Dust measurement procedure Particular requirements for sanders other than disk type
    8/31/2016 - PDF - English - BSI
    Learn More
    €151.00

  • VG 95236-13:2016-08

    Tools for electrical components - Part 13: Processing tools for heat shrinkable components, detail standard, Text in German and English
    8/1/2016 - PDF - English, German - DIN
    Learn More
    €131.96

  • DIN EN 62841-2-14 VDE 0740-2-14:2016-08

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers (IEC 62841-2-14:2015, modified), German version EN 62841-2-14:2015
    8/1/2016 - Paper - German - VDE
    Learn More
    €69.60

  • NF EN 62841-3-4, C75-841-3-4 (08/2016)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4 : particular requirements for transportable bench grinders
    8/1/2016 - Paper - French - AFNOR
    Learn More
    €105.00

  • UNE-EN 62841-3-4:2016

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (Endorsed by AENOR in August of 2016.)
    8/1/2016 - PDF - English - AENOR
    Learn More
    €68.00

  • UNE-EN ISO 28927-8:2010/A1:2016

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces (ISO 28927-8:2009/Amd 1:2015)
    7/27/2016 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN ISO 28927-8:2010/A1:2016

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces (ISO 28927-8:2009/Amd 1:2015)
    7/27/2016 - PDF - English - AENOR
    Learn More
    €72.00

  • DIN EN 62841-1 VDE 0740-1:2016-07

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements (IEC 62841-1:2014, modified + Cor. 1:2014 + Cor. 2:2015), German version EN 62841-1:2015 + AC:2015
    7/1/2016 - Paper - German - VDE
    Learn More
    €252.90

  • NF EN 62841-2-11, C75-841-2-11 (07/2016)

    Electric motor-operated hand-held tools,transportable tools and lawn and garden machinery - Safety - Part 2-11 : particular requirements for hand-held reciprocating saws
    7/1/2016 - Paper - French - AFNOR
    Learn More
    €103.33

  • SAE AS 39029/118:2021-01-12

    CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, ENGINE APPLICATION (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS)
    6/6/2016 - PDF - English - SAE
    Learn More
    €70.00

  • UNE-EN 62841-3-9:2015

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (Endorsed by AENOR in May of 2016.)
    5/1/2016 - PDF - English - AENOR
    Learn More
    €74.00

  • UNE-EN 62841-2-11:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (Endorsed by AENOR in May of 2016.)
    5/1/2016 - PDF - English - AENOR
    Learn More
    €68.00

  • DIN 87310:2016-05

    Multi-purpose keys with inner square and flat ends
    5/1/2016 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 87312:2016-05

    Flat-ended keys for deck screw caps for filling and sounding pipes
    5/1/2016 - PDF - German - DIN
    Learn More
    €32.34

  • BS EN 60745-2-3:2011+A13:2015

    Hand-held motor-operated electric tools. Safety Particular requirements for grinders, polishers and disk-type sanders
    4/30/2016 - PDF - English - BSI
    Learn More
    €348.00

  • IEC 62841-2-8:2016

    IEC 62841-2-8:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers
    4/18/2016 - PDF - English, French - IEC
    Learn More
    €92.00

  • UNE-EN 62841-1:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
    4/13/2016 - PDF - Spanish - AENOR
    Learn More
    €173.00

  • UNE-EN 62841-1:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
    4/13/2016 - PDF - English - AENOR
    Learn More
    €207.60

  • UNE-EN 62841-2-14:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers
    4/13/2016 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-EN 62841-2-14:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers
    4/13/2016 - PDF - English - AENOR
    Learn More
    €81.60

  • UNE-EN 62841-3-10:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
    4/13/2016 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN 62841-3-10:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
    4/13/2016 - PDF - English - AENOR
    Learn More
    €88.80

  • DIN EN 50632-2-22 VDE 0740-632-2-22:2016-04

    Electric motor-operated tools - Dust measurement procedure - Part 2-22: Particular requirements for cut-off machines and wall chasers, German version EN 50632-2-22:2015
    4/1/2016 - Paper - German - VDE
    Learn More
    €38.31

  • DIN EN 50632-2-6 VDE 0740-632-2-6:2016-04

    Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hammers, German version EN 50632-2-6:2015
    4/1/2016 - Paper - German - VDE
    Learn More
    €42.45

  • DIN EN 50632-1 VDE 0740-632-1:2016-04

    Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirements, German version EN 50632-1:2015
    4/1/2016 - Paper - German - VDE
    Learn More
    €42.45

  • DIN EN 50632-2-1 VDE 0740-632-2-1:2016-04

    Electric motor-operated tools - Dust measurement procedure - Part 2-1: Particular requirements for diamond core drills, German version EN 50632-2-1:2015
    4/1/2016 - Paper - German - VDE
    Learn More
    €38.31

  • NF EN 62841-2-2, C75-841-2-2 (04/2016)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2 : particular requirements for hand-held screwdrivers and impact wrenches
    4/1/2016 - Paper - French - AFNOR
    Learn More
    €103.33

  • BS EN 62841-2-4:2014

    Electric motor-operated hand-held tools, transportable tools and lawn garden machinery. Safety Particular requirements for sanders polishers other than disc type
    3/31/2016 - PDF - English - BSI
    Learn More
    €250.00

  • JIS C 9335-2-45:2016

    Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
    3/22/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF EN ISO 28927-8/A1, E90-321-8/A1 (03/2016)

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8 : saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1 : polishing machines, modified feed forces
    3/1/2016 - Paper - French - AFNOR
    Learn More
    €60.67

  • NF EN 60745-2-3/A13, C75-745-2-3/A13 (03/2016)

    Hand-held motor-operated electric tools - Safety - Part 2-3 : particular requirements for grinders, polishers and disk-type sanders
    3/1/2016 - Paper - French - AFNOR
    Learn More
    €54.67

  • BS EN 62841-2-2:2014

    Electric motor-operated hand-held tools, transportable tools and lawn garden machinery. Safety Particular requirements for screwdrivers impact wrenches
    2/29/2016 - PDF - English - BSI
    Learn More
    €180.00

  • IEC 62841-3-4:2016

    IEC 62841-3-4:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
    2/18/2016 - PDF - English, French - IEC
    Learn More
    €173.00

  • JIS B 4635/ERRATUM 1:2016

    ERRATUM
    2/4/2016 - PDF - Japanese - JSA
    Learn More
    €0.00

  • NF ISO 3857-1, E51-200 (02/2016)

    Compressors, pneumatic tools and machines - Vocabulary - Part 1 : general
    2/1/2016 - Paper - English, French - AFNOR
    Learn More
    €42.11

  • NF ISO 3857-2, E51-201 (02/2016)

    Compressors, pneumatic tools and machines - Vocabulary - Part 2 : compressors
    2/1/2016 - Paper - English, French - AFNOR
    Learn More
    €42.11

  • DIN EN 62841-2-9 VDE 0740-2-9:2016-02

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders (IEC 62841-2-9:2015, modified), German version EN 62841-2-9:
    2/1/2016 - Paper - German - VDE
    Learn More
    €65.60

  • DIN EN 62841-2-21 VDE 0740-2-21:2016-02

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners (IEC 116/250/CDV:2015), German version FprEN 62841-2-21:2015
    2/1/2016 - Paper - German - VDE
    Learn More
    €22.72

  • NF EN 62841-2-9, C75-841-2-9 (02/2016)

    Electric motor-operated hand-held, transportable tools and lawn and garden machinery - Safety - Part 2-9 : particular requirements for hand-held tappers and threaders
    2/1/2016 - Paper - French - AFNOR
    Learn More
    €103.33

  • BS EN 62841-2-14:2015

    Electric motor-operated hand-held tools, transportable tools and lawn garden machinery. Safety Particular requirements for planers
    1/31/2016 - PDF - English - BSI
    Learn More
    €250.00

  • NBN EN ISO 28927-8:2009/A1:2016

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces (ISO 28927-8:2009/Amd 1:2015)
    1/29/2016 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 28927-8:2009/A1:2016

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces (ISO 28927-8:2009/Amd 1:2015)
    1/29/2016 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 28927-8:2009/A1:2016

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces (ISO 28927-8:2009/Amd 1:2015)
    1/29/2016 - PDF - English - NBN
    Learn More
    €20.00

  • UNE-EN 60745-2-3:2011/A13:2016

    Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
    1/27/2016 - PDF - Spanish - AENOR
    Learn More
    €27.00

  • UNE-EN 60745-2-3:2011/A13:2016

    Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
    1/27/2016 - PDF - English - AENOR
    Learn More
    €32.40

  • UNE-EN 62841-2-4:2014/AC:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type
    1/27/2016 - PDF - Spanish - AENOR
    Learn More
    €0.00

  • UNE-EN 62841-2-4:2014/AC:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type
    1/27/2016 - PDF - English - AENOR
    Learn More
    €0.00

  • UNE-EN 62841-2-2:2014/AC:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches
    1/27/2016 - PDF - Spanish - AENOR
    Learn More
    €0.00

  • UNE-EN 62841-2-2:2014/AC:2016

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches
    1/27/2016 - PDF - English - AENOR
    Learn More
    €0.00

  • ASTM F1505-16(2021)

    Standard Specification for Insulated and Insulating Hand Tools
    1/1/2016 - PDF - English - ASTM
    Learn More
    €74.00

  • ASTM F1505-16(2021) + Redline

    Standard Specification for Insulated and Insulating Hand Tools
    1/1/2016 - PDF - English - ASTM
    Learn More
    €87.00

  • NF EN 50632-2-22, C75-132-2-22 (01/2016)

    Electric motor-operated tools - Dust measurement procedure - Part 2-22 : particular requirements for cut-off machines and wall chasers
    1/1/2016 - Paper - French - AFNOR
    Learn More
    €72.00

  • NF EN 62841-1, C75-841-1 (01/2016)

    Electric motor-operated hand-held, transportable tools and lawn and garden machinery - Safety - Part 1 : general requirements - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses
    1/1/2016 - Paper - French - AFNOR
    Learn More
    €265.00

  • UNE-EN 62841-3-1:2014/AC:2015

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) (Endorsed by AENOR in January of 2016.)
    1/1/2016 - PDF - English - AENOR
    Learn More
    €0.00

  • UNE-EN 50632-1:2015 (R2020)

    Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirement
    12/9/2015 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN 50632-1:2015 (R2020)

    Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirement
    12/9/2015 - PDF - English - AENOR
    Learn More
    €58.80

  • UNE-EN 50632-2-1:2015 (R2020)

    Electric motor-operated tools - Dust measurement procedure - Part 2-1: Particular requirements for diamond core drills
    12/9/2015 - PDF - Spanish - AENOR
    Learn More
    €46.00

  • UNE-EN 50632-2-1:2015 (R2020)

    Electric motor-operated tools - Dust measurement procedure - Part 2-1: Particular requirements for diamond core drills
    12/9/2015 - PDF - English - AENOR
    Learn More
    €55.20

  • UNE-EN 50632-2-22:2015 (R2020)

    Electric motor-operated tools - Dust measurement procedure - Part 2-22: Particular requirements for cut-off machines and wall chasers
    12/9/2015 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN 50632-2-22:2015 (R2020)

    Electric motor-operated tools - Dust measurement procedure - Part 2-22: Particular requirements for cut-off machines and wall chasers
    12/9/2015 - PDF - English - AENOR
    Learn More
    €58.80

  • DIN EN ISO 28927-5:2015-12

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009 + Amd 1:2015), German version EN ISO 28927-5:2009 + A1:2015
    12/1/2015 - PDF - German - DIN
    Learn More
    €99.35

  • DIN EN ISO 28927-5:2015-12

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009 + Amd 1:2015) (includes Amendment A1:2015)
    12/1/2015 - PDF - English - DIN
    Learn More
    €124.21

  • DIN EN 61029-2-5 VDE 0740-505:2015-12

    Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993, modified + A1:2001, modified), German version EN 61029-2-5:2011 + A11:2015
    12/1/2015 - Paper - German - VDE
    Learn More
    €61.54

  • DIN EN 62841-4-2 VDE 0740-4-2:2015-12

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-2: Particular requirements for hedge trimmers (IEC 116/224/CDV:2015), German version FprEN 62841-4-2:2015
    12/1/2015 - Paper - German - VDE
    Learn More
    €69.60

  • NF EN 62841-3-10, C75-841-3-10 (12/2015)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10 : particular requirements for transportable cut-off machines - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-10 : Exigences particulières pour les scies à onglets transportables
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €116.33

  • NF E73-130 (12/2015)

    Pliers and nippers - Pliers for retaining rings
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €60.67

  • NF E71-212 (12/2015)

    Concrete point chisels and mason chisels
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF E71-211 (12/2015)

    Nail sets (or taper punches) - Pin punches - Centre punches
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF E73-107 (12/2015)

    Pliers and nippers - End cutting nippers (large rivet) for soft wire - Pinces et tenailles - Pinces coupantes façon Comté
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF E71-210 (12/2015)

    Engineer cold chisels and cross-cut chisels
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €34.67

  • NF E71-001 (12/2015)

    Tools for hammering and allied tools - Terminology - Nomenclature
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €86.67

  • UNE-EN ISO 28927-5:2010/A1:2015

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009/Amd 1:2015)
    11/18/2015 - PDF - Spanish - AENOR
    Learn More
    €27.00

  • UNE-EN ISO 28927-5:2010/A1:2015

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009/Amd 1:2015)
    11/18/2015 - PDF - English - AENOR
    Learn More
    €32.40

  • IEC 62841-2-11:2015

    IEC 62841-2-11:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
    11/18/2015 - PDF - English, French - IEC
    Learn More
    €173.00

  • NF EN ISO 28927-5/A1, E90-321-5/A1 (11/2015)

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5 : drills and impact drills - Amendment 1 : feed force
    11/1/2015 - Paper - French - AFNOR
    Learn More
    €25.50

  • BS EN 62841-2-5:2014

    Electric motor-operated hand-held tools, transportable tools and lawn garden machinery. Safety Particular requirements for circular saws
    10/31/2015 - PDF - English - BSI
    Learn More
    €331.00

  • UNE-EN 50632-2-6:2015 (R2020)

    Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
    10/28/2015 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN 50632-2-6:2015 (R2020)

    Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
    10/28/2015 - PDF - English - AENOR
    Learn More
    €62.40

  • NBN EN ISO 28927-5/A1:2015

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009/Amd 1:2015)
    10/23/2015 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 28927-5/A1:2015

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009/Amd 1:2015)
    10/23/2015 - PDF - English - NBN
    Learn More
    €20.00

  • BS EN ISO 28927-5:2009+A1:2015

    Hand-held portable power tools. Test methods for evaluation of vibration emission Drills and impact drills
    9/30/2015 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 11148-10:2011

    Hand-held non-electric power tools. Safety requirements Compression tools
    9/30/2015 - PDF - English - BSI
    Learn More
    €293.00

  • BS EN 50632-2-22:2015

    Electric motor-operated tools. Dust measurement procedure Particular requirements for cut-off machines and wall chasers
    9/30/2015 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN 50632-2-1:2015

    Electric motor-operated tools. Dust measurement procedure Particular requirements for diamond core drills
    9/30/2015 - PDF - English - BSI
    Learn More
    €151.00

  • UNE-EN 62841-2-9:2015

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
    9/30/2015 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-EN 62841-2-9:2015

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
    9/30/2015 - PDF - English - AENOR
    Learn More
    €81.60

  • IEC 62841-3-10:2015

    IEC 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
    9/22/2015 - PDF - English, French - IEC
    Learn More
    €219.00

  • IEC 62841-3-10:2015

    IEC 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
    9/22/2015 - PDF - English - IEC
    Learn More
    €219.00

  • DIN ISO 2351-3:2015-08

    Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2014)
    8/1/2015 - PDF - German - DIN
    Learn More
    €45.98

  • DIN ISO 2351-3:2015-08

    Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2014)
    8/1/2015 - PDF - English - DIN
    Learn More
    €57.57

  • DIN EN 62841-3-12 VDE 0740-3-12:2015-08

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-12: Particular requirements for transportable threading machines (IEC 116/217/CDV:2015), German version FprEN 62841-3-12:2015
    8/1/2015 - Paper - German - VDE
    Learn More
    €20.45

  • UNE-EN 62841-3-6:2014/AC:2015

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for diamond drills with liquid system
    7/29/2015 - PDF - Spanish - AENOR
    Learn More
    €0.00

  • UNE-EN 62841-3-6:2014/AC:2015

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for diamond drills with liquid system
    7/29/2015 - PDF - English - AENOR
    Learn More
    €0.00

  • VG 95236-4:2015-07

    Tools for electrical components - Part 4: Inserting and extracting tools for contacts, detail standard, Text in German and English.
    7/1/2015 - PDF - English, German - DIN
    Learn More
    €99.35

  • IEC 62841-2-14:2015

    IEC 62841-2-14:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers
    6/25/2015 - PDF - English, French - IEC
    Learn More
    €132.00

  • IEC 62841-2-14:2015

    IEC 62841-2-14:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers
    6/25/2015 - PDF - English - IEC
    Learn More
    €132.00

  • 15/30322309 DC:2015

    BS ISO 9242. Pliers and nippers. Construction worker’s pincers. Dimensions and test values
    6/22/2015 - PDF - English - BSI
    Learn More
    €24.00

  • DIN EN 62841-4-1 VDE 0740-4-1:2015-06

    Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws (IEC 116/207/CDV:2015), German version FprEN 62841-4-1:2015
    6/1/2015 - Paper - German - VDE
    Learn More
    €45.89

  • VG 95236-12:2015-06

    Tools for electrical components - Part 12: Crimping tools for contacts for connectors, hand actuated, detail standard, Text in German and English.
    6/1/2015 - PDF - English, German - DIN
    Learn More
    €72.80

  • BS ISO 3317:2015

    Assembly tools for screws and nuts. Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
    5/31/2015 - PDF - English - BSI
    Learn More
    €151.00

  • DIN EN 62841-2-2 VDE 0740-2-2:2015-05

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified), German version EN 62841-2-2:2014
    5/1/2015 - Paper - German - VDE
    Learn More
    €65.60

  • DIN EN 62841-2-4 VDE 0740-2-4:2015-05

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified), German version EN 62841-2-4:2014
    5/1/2015 - Paper - German - VDE
    Learn More
    €61.54

Items 601 to 800 of 1826 total

Set Ascending Direction
per page

List  Grid