25.100 : Cutting tools
-
PR NF ISO 21949, E75-085PR (03/2024)
Produits abrasifs appliqués - Feuilles simples avec trous pour extraction de la poussière
3/1/2024 - Paper - English, French -
Learn More€64.50 -
NF ISO 21538, E75-321 (03/2024)
Âmes pour meules de tronçonnage superabrasives - Alésages de montage et de fixation - Bâtiment et génie civil
3/1/2024 - Paper - French -
Learn More€60.67 -
PR NF ISO 21951, E75-089PR (03/2024)
Produits abrasifs appliqués - Disques simples avec trous pour extraction de la poussière
3/1/2024 - Paper - English, French -
Learn More€56.00 -
NF ISO 603-8, E75-202-8 (02/2024)
Produits abrasifs agglomérés - Dimensions - Partie 8 : meules pour ébarbage et ébavurage sur une meuleuse stationnaire
2/1/2024 - Paper - French -
Learn More€34.67 -
NF ISO 603-9, E75-202-9 (02/2024)
Produits abrasifs agglomérés - Dimensions - Partie 9 : meules pour meulage haute pression
2/1/2024 - Paper - French -
Learn More€34.67 -
€34.67
-
NF ISO 603-15, E75-202-15 (12/2022)
Bonded abrasive products - Dimensions - Part 15 : grinding wheels for cutting-off on stationary or mobile cutting-off machines
12/1/2022 - Paper - French -
Learn More€48.00 -
NF ISO 603-16, E75-202-16 (12/2022)
Bonded abrasive products - Dimensions - Part 16 : grinding wheels for cutting-off on hand held power tools
12/1/2022 - Paper - French -
Learn More€48.00 -
NF ISO 603-14, E75-202-14 (12/2022)
Bonded abrasive products - Dimensions - Part 14 : grinding wheels for deburring and fettling/snagging on an angle grinder
12/1/2022 - Paper - French -
Learn More€60.67 -
NF E66-324 (04/2022)
Outils de tour - Porte-plaquette de décolletage - Formes et dimensions
4/1/2022 - Paper - French -
Learn More€48.00 -
PR NF EN IEC 62841-2-23 ED1, C75-841-2-23PR (04/2022)
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-23 : Exigences particulières pour les meules à rectifier les matrices portatives et les outils rotatifs de petite taille
4/1/2022 - Paper - English, French -
Learn More€88.50 -
PR NF EN IEC 62841-2-23/AA, C75-841-2-23/AAPR (04/2022)
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-23 : exigences particulières pour les meules à rectifier les matrices portatives et les outils rotatifs de petite taille
4/1/2022 - Paper - English, French -
Learn More€56.00 -
NF ISO 6344-2, E75-101 (01/2022)
Coated abrasives - Determination and designation of grain size distribution - Part 2 : Macrogrit sizes P12 to P220
1/1/2022 - Paper - French -
Learn More€60.67 -
€48.00
-
NF ISO 6344-3, E75-100-3 (01/2022)
Coated abrasives - Determination and designation of grain size distribution - Part 3 : Microgrit sizes P240 to P5000
1/1/2022 - Paper - French -
Learn More€86.67 -
€48.00
-
NF E66-323 (01/2022)
Turning tools - Cutting-off tool holders - Designation - Code of symbolization
1/1/2022 - Paper - French -
Learn More€60.67 -
XP ISO/TS 13399-2, E66-525-2 (12/2021)
Représentation et échange des données relatives aux outils coupants - Partie 2 : dictionnaire de référence pour les éléments coupants
12/1/2021 - Paper - French -
Learn More€225.33 -
XP ISO/TS 13399-3, E66-525-3 (12/2021)
Représentation et échange des données relatives aux outils coupants - Partie 3 : dictionnaire de référence pour les éléments relatifs aux outils
12/1/2021 - Paper - French -
Learn More€339.33 -
XP ISO/TS 13399-4, E66-525-4 (12/2021)
Représentation et échange des données relatives aux outils coupants - Partie 4 : dictionnaire de référence pour les éléments relatifs aux attachements
12/1/2021 - Paper - French -
Learn More€225.33 -
NF ISO 9286, E75-236 (12/2021)
Abrasive grains and crude - Chemical analysis of silicon carbide
12/1/2021 - Paper - French -
Learn More€86.67 -
NF ISO 3002-4, E66-507 (10/2021)
Grandeurs de base en usinage et rectification - Partie 4 : forces, énergie et puissance
10/1/2021 - Paper - French -
Learn More€60.67 -
€25.67
-
€34.50
-
€48.00
-
NF ISO 7755-3, E66-650-3 (08/2021)
Hardmetal burrs - Part 3 : cylindrical round - (ball-) nose burrs (style C)
8/1/2021 - Paper - French -
Learn More€34.50 -
€34.67
-
€34.50
-
NF ISO 7755-6, E66-650-6 (08/2021)
Hardmetal burrs - Part 6 : arch round - (ball-) nose burrs (style F)
8/1/2021 - Paper - French -
Learn More€34.67 -
NF ISO 7755-10, E66-650-10 (08/2021)
Hardmetal burrs - Part 10 : conical round - (ball-) nose burrs (style L)
8/1/2021 - Paper - French -
Learn More€34.50 -
€34.50
-
NF ISO 7755-9, E66-650-9 (08/2021)
Hardmetal burrs - Part 9 : 60 degrees and 90 degrees cone burrs (styles J and K) - Fraises-limes en métaux-durs - Partie 9 : Fraises-limes coniques 60 degrés et 90 degrés (formes J et K).
8/1/2021 - Paper - French -
Learn More€34.67 -
€34.50
-
€34.67
-
NF ISO 7755-11, E66-650-11 (08/2021)
Hardmetal burrs - Part 11 : conical pointed-nose burrs (style M)
8/1/2021 - Paper - French -
Learn More€34.67 -
NF ISO 525, E75-201 (12/2020)
Bonded abrasive products - Shape types, designation and marking
12/1/2020 - Paper - French -
Learn More€86.67 -
FD E66-000 (09/2020)
Tools - French standardization in the field of tools - Overall survey
9/1/2020 - Paper - French -
Learn More€144.50 -
NF E66-321 (09/2020)
Hardmetal inserts for tools for turning on automatic machines
9/1/2020 - Paper - French -
Learn More€34.67 -
€34.67
-
NF E66-322 (09/2020)
Turning tools - Tools with hardmetal inserts for turning on automatic machines
9/1/2020 - Paper - French -
Learn More€75.67 -
€25.67
-
NF E66-616 (02/2020)
Internal broaching tools - Pushed broaches - Shape and dimension of the ends
2/1/2020 - Paper - French -
Learn More€48.00 -
€75.67
-
€34.67
-
€60.67
-
XP ISO/TS 13399-406, E66-525-406 (11/2019)
Cutting tool data representation and exchange - Part 406 : creation and exchange of 3D models - Modelling of connection interface
11/1/2019 - Paper - French -
Learn More€108.00 -
XP ISO/TS 13399-403, E66-525-403 (11/2019)
Cutting tool data representation and exchange - Part 403 : creation and exchange of 3D models - Modelling of driven tool units
11/1/2019 - Paper - French -
Learn More€99.00 -
€130.67
-
NF ISO 13942, E75-215 (09/2019)
Bonded abrasive products - Limit deviations and run-out tolerances
9/1/2019 - Paper - French -
Learn More€86.67 -
XP ISO/TS 13399-314, E66-525-314 (08/2019)
Cutting tool data representation and exchange - Part 314 : creation and exchange of 3D models - Cartridges for indexable inserts
8/1/2019 - Paper - French -
Learn More€86.50 -
XP ISO/TS 13399-311, E66-525-311 (08/2019)
Cutting tool data representation and exchange - Part 311 : creation and exchange of 3D models - Solid reamers
8/1/2019 - Paper - French -
Learn More€86.50 -
XP ISO/TS 13399-315, E66-525-315 (08/2019)
Cutting tool data representation and exchange - Part 315 : creation and exchange of 3D models - Modelling of machine operated feed out tools
8/1/2019 - Paper - French -
Learn More€108.00 -
XP ISO/TS 13399-312, E66-525-312 (08/2019)
Cutting tool data representation and exchange - Part 312 : creation and exchange of 3D models - Reamers for indexable inserts
8/1/2019 - Paper - French -
Learn More€108.00 -
XP ISO/TS 13399-310, E66-525-310 (08/2019)
Cutting tool data representation and exchange - Part 310 : creation and exchange of 3D models - Turning tools with carbide tips
8/1/2019 - Paper - French -
Learn More€99.00 -
€75.50
-
XP ISO/TS 13399-308, E66-525-308 (06/2019)
Cutting tool data representation and exchange - Part 308 : creation and exchange of 3D models - Milling cutters with arbor hole for indexable inserts
6/1/2019 - Paper - French -
Learn More€119.00 -
XP ISO/TS 13399-306, E66-525-306 (06/2019)
Cutting tool data representation and exchange - Part 306 : creation and exchange of 3D models - Drills and countersinking tools for indexable inserts
6/1/2019 - Paper - French -
Learn More€130.50 -
XP ISO/TS 13399-309, E66-525-309 (06/2019)
Cutting tool data representation and exchange - Part 309 : creation and exchange of 3D models - Tool holders for indexable inserts
6/1/2019 - Paper - French -
Learn More€130.50 -
NF EN ISO 28927-8/A2, E90-321-8/A2 (06/2019)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8 : saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - AMENDMENT 2 : oscillating knives (vibrating screen removal tools) - Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 8 : Scies, polisseuses et limes alternatives, et petites scies oscillantes ou circulaires - Amendement 2
6/1/2019 - Paper - French -
Learn More€34.67 -
XP ISO/TS 13399-307, E66-525-307 (06/2019)
Cutting tool data representation and exchange - Part 307 : creation and exchange of 3D models - End mills for indexable inserts
6/1/2019 - Paper - French -
Learn More€144.50 -
XP ISO/TS 13399-313, E66-525-313 (06/2019)
Cutting tool data representation and exchange - Part 313 : creation and exchange of 3D models - Burrs
6/1/2019 - Paper - French -
Learn More€99.00 -
XP ISO/TS 13399-301, E66-525-301 (05/2019)
Cutting tool data representation and exchange - Part 301 : concept for the design of 3D models based on properties according to ISO/TS 13399-3 : modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
5/1/2019 - Paper - French -
Learn More€86.50 -
XP ISO/TS 13399-304, E66-525-304 (05/2019)
Cutting tool data representation and exchange - Part 304 : creation and exchange of 3D models - Solid milling cutters with arbor hole
5/1/2019 - Paper - French -
Learn More€99.00 -
XP ISO/TS 13399-302, E66-525-302 (05/2019)
Cutting tool data representation and exchange - Part 302 : concept for the design of 3D models based on properties according to ISO/TS 13399-3 : modelling of solid drills and countersinking tools
5/1/2019 - Paper - French -
Learn More€108.00 -
XP ISO/TS 13399-305, E66-525-305 (05/2019)
Cutting tool data representation and exchange - Part 305 : creation and exchange of 3D models - Modular tooling systems with adjustable cartridges for boring
5/1/2019 - Paper - French -
Learn More€144.50 -
XP ISO/TS 13399-303, E66-525-303 (05/2019)
Cutting tool data representation and exchange - Part 303 : creation and exchange of 3D models - Solid end mills
5/1/2019 - Paper - French -
Learn More€99.00 -
€119.00
-
€46.55
-
NF ISO 2780, E66-204 (12/2018)
Milling cutters with tenon drive - Interchangeability dimensions for cutter arbors - Metric series
12/1/2018 - Paper - French -
Learn More€46.55 -
NF ISO 2296, E66-233 (12/2018)
Metal slitting saws with fine and coarse teeth - Metric series
12/1/2018 - Paper - French -
Learn More€46.55 -
XP ISO/TS 13399-401, E66-525-401 (08/2018)
Cutting tool data representation and exchange - Part 401 : creation and exchange of 3D models - Converting, extending and reducing adaptive items
8/1/2018 - Paper - French -
Learn More€83.85 -
XP ISO/TS 13399-203, E66-525-203 (08/2018)
Cutting tool data representation and exchange - Part 203 : creation and exchange of 3D models - Replaceable inserts for drilling
8/1/2018 - Paper - French -
Learn More€73.23 -
XP ISO/TS 13399-201, E66-525-201 (08/2018)
Cutting tool data representation and exchange - Part 201 : creation and exchange of 3D models - Regular inserts
8/1/2018 - Paper - French -
Learn More€96.12 -
XP ISO/TS 13399-405, E66-525-405 (08/2018)
Cutting tool data representation and exchange - Part 405 : creation and exchange of 3D models - Collets
8/1/2018 - Paper - French -
Learn More€96.00 -
XP ISO/TS 13399-204, E66-525-204 (08/2018)
Cutting tool data representation and exchange - Part 204 : creation and exchange of 3D models - Inserts for reaming
8/1/2018 - Paper - French -
Learn More€73.00 -
XP ISO/TS 13399-202, E66-525-202 (08/2018)
Cutting tool data representation and exchange - Part 202 : creation and exchange of 3D models - Irregular inserts
8/1/2018 - Paper - French -
Learn More€104.67 -
XP ISO/TS 13399-72, E66-525-72 (04/2018)
Cutting tool data representation and exchange - Part 72 : creation of documents for the standardized data exchange - Definition of properties for drawing header and their XML-data exchange
4/1/2018 - Paper - French -
Learn More€86.50 -
XP ISO/TS 13399-70, E66-525-70 (04/2018)
Cutting tool data representation and exchange - Part 70 : Graphical data layout - Layer setting for tool layout
4/1/2018 - Paper - French -
Learn More€104.67 -
XP ISO/TS 13399-71, E66-525-71 (04/2018)
Cutting tool data representation and exchange - Part 71 : graphical data layout - Creation of documents for standardized data exchange : graphical product information
4/1/2018 - Paper - French -
Learn More€46.55 -
€135.26
-
€81.02
-
NF ISO 15637-2, E75-090-2 (12/2017)
Holding fixtures of cylindrical abrasive sleeves - Part 2 : holding fixtures for stationary machines
12/1/2017 - Paper - French -
Learn More€32.49 -
NF ISO 2284, E66-120 (12/2017)
Hand taps for parallel and taper pipe threads - General dimensions and marking
12/1/2017 - Paper - French -
Learn More€48.00 -
€32.49
-
NF ISO 9285, E75-235 (12/2017)
Abrasive grains and crude - Chemical analysis of fused aluminium oxide
12/1/2017 - Paper - French -
Learn More€73.23 -
NF ISO 15637-1, E75-090-1 (12/2017)
Holding fixtures of cylindrical abrasive sleeves - part 1 : holding fixtures with shank for hand held grinding machines
12/1/2017 - Paper - French -
Learn More€33.62 -
NF ISO 3365, E66-319 (12/2017)
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole - Dimensions
12/1/2017 - Paper - French -
Learn More€73.23 -
NF ISO 10911, E66-265 (11/2017)
Solid hardmetal end mills with cylindrical shank - Dimensions
11/1/2017 - Paper - French -
Learn More€46.55 -
XP ISO/TS 13399-60, E66-525-60 (11/2017)
Cutting tool data representation and exchange - Part 60 : reference dictionary for connection systems
11/1/2017 - Paper - French -
Learn More€192.00 -
NF ISO 7079, E66-057 (11/2017)
Core drills with parallel shanks and with Morse taper shanks
11/1/2017 - Paper - French -
Learn More€56.64 -
XP ISO/TS 13399-5, E66-525-5 (11/2017)
Cutting tool data representation and exchange - Part 5 : reference dictionary for assembly items
11/1/2017 - Paper - French -
Learn More€115.12 -
NF ISO 2584, E66-207 (11/2017)
Cylindrical cutters with plain bore and key drive - Metric series
11/1/2017 - Paper - French -
Learn More€34.50 -
NF ISO 3364, E66-315 (10/2017)
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions
10/1/2017 - Paper - French -
Learn More€73.23 -
XP ISO/TS 13399-50, E66-525-50 (07/2017)
Cutting tool data representation and exchange - Part 50 : reference dictionary for reference systems and common concepts
7/1/2017 - Paper - French -
Learn More€161.78 -
NF ISO 5468, E66-079 (06/2017)
Rotary and rotary impact masonry drill bits with hardmetal tips - Dimensions
6/1/2017 - Paper - French -
Learn More€46.55 -
NF ISO 2250, E66-017 (05/2017)
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
5/1/2017 - Paper - French -
Learn More€33.62 -
€83.85
-
€46.55
-
€33.62
-
NF ISO 4204, E66-025 (04/2017)
Countersinks, 90°, with Morse taper shanks and detachable pilots
4/1/2017 - Paper - French -
Learn More€33.62 -
NF ISO 21538, E75-321 (04/2017)
Blanks for superabrasive cutting-off wheels - Mounting and fixing bores - Building construction and civil engineering
4/1/2017 - Paper - French -
Learn More€46.55 -
€73.23
-
€48.00
-
NF EN ISO 4231, E66-153 (03/2017)
Hand - and machine-operated circular screwing dies for parallel pipe threads - G series
3/1/2017 - Paper - French -
Learn More€33.62 -
NF ISO 2540, E66-054 (02/2017)
Centre drills for centre holes with protecting chamfer - Type B
2/1/2017 - Paper - French -
Learn More€48.00 -
NF EN ISO 4230, E66-154 (01/2017)
Hand - and machine-operated circular screwing dies for taper pipe threads - R series
1/1/2017 - Paper - French -
Learn More€33.62 -
€34.50
-
NF ISO 4205, E66-023 (01/2017)
Countersinks, 90°, with parallel shanks and solid pilots - Outils à chanfreiner à 90 degrés, à queue cylindrique et pilote fixe
1/1/2017 - Paper - French -
Learn More€46.55 -
€48.00
-
NF ISO 235, E66-062 (01/2017)
Parallel shank jobber and stub series drills and Morse taper shank drills
1/1/2017 - Paper - French -
Learn More€73.23 -
NF ISO 866, E66-053 (11/2016)
Centre drills for centre holes without protecting chamfers - Type A
11/1/2016 - Paper - French -
Learn More€48.00 -
NF ISO 240, E66-202 (10/2016)
Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels
10/1/2016 - Paper - French -
Learn More€48.00 -
NF ISO 10145-2, E66-280-2 (06/2016)
End mills with brazed helical hardmetal tips - Part 2 : Dimensions of end mills with 7/24 taper shank
6/1/2016 - Paper - French -
Learn More€33.50 -
€34.67
-
NF EN ISO 28927-8/A1, E90-321-8/A1 (03/2016)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8 : saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1 : polishing machines, modified feed forces
3/1/2016 - Paper - French -
Learn More€60.67 -
€48.00
-
NF ISO 5611-11, E66-345-11 (02/2016)
Cartridges, type A, for indexable inserts - Part 11 : style W
2/1/2016 - Paper - French -
Learn More€48.00 -
€46.55
-
€48.00
-
NF ISO 5611-12, E66-345-12 (02/2016)
Cartridges, type A, for indexable inserts - Part 12 : style Y
2/1/2016 - Paper - French -
Learn More€48.00 -
€48.00
-
€48.00
-
NF ISO 5611-10, E66-345-10 (02/2016)
Cartridges, type A, for indexable inserts - Part 10 : style U
2/1/2016 - Paper - French -
Learn More€48.00 -
€46.55
-
€48.00
-
€48.00
-
€25.50
-
NF EN ISO 6103, E75-200 (12/2014)
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing
12/1/2014 - Paper - French -
Learn More€48.00 -
NF ISO 5610-10, E66-344-10 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 10 : style N
11/1/2014 - Paper - French -
Learn More€60.50 -
NF ISO 5610-7, E66-344-7 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 7 : style J
11/1/2014 - Paper - French -
Learn More€60.50 -
NF ISO 5610-14, E66-344-14 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 14 : style H
11/1/2014 - Paper - French -
Learn More€58.50 -
NF ISO 5610-5, E66-344-5 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 5 : style F
11/1/2014 - Paper - French -
Learn More€60.50 -
NF ISO 5610-11, E66-344-11 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 11 : style R
11/1/2014 - Paper - French -
Learn More€60.50 -
NF ISO 5610-9, E66-344-9 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 9 : style L
11/1/2014 - Paper - French -
Learn More€60.50 -
NF ISO 5610-3, E66-344-3 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 3 : style B
11/1/2014 - Paper - French -
Learn More€58.50 -
NF ISO 5610-8, E66-344-8 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 8 : style K
11/1/2014 - Paper - French -
Learn More€60.50 -
NF ISO 5610-15, E66-344-15 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 15 : style V
11/1/2014 - Paper - French -
Learn More€48.00 -
NF ISO 5610-12, E66-344-12 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 12 : style S
11/1/2014 - Paper - French -
Learn More€75.50 -
NF ISO 5610-6, E66-344-6 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 6 : style G
11/1/2014 - Paper - French -
Learn More€60.50 -
NF ISO 5610-13, E66-344-13 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 13 : style T
11/1/2014 - Paper - French -
Learn More€48.00 -
NF ISO 603-17, E75-202-17 (11/2014)
Bonded abrasive products - Dimensions - Part 17 : spindle mounted wheels (ISO type 52) - Produits abrasifs agglomérés
11/1/2014 - Paper - French -
Learn More€86.50 -
NF ISO 5610-4, E66-344-4 (11/2014)
Tool holders with rectangular shank for indexable inserts - Part 4 : style D
11/1/2014 - Paper - French -
Learn More€58.50 -
€48.00
-
NF ISO 6262-2, E66-252-2 (02/2014)
End mills with indexable inserts - Part 2 : end mills with Morse taper shank
2/1/2014 - Paper - French -
Learn More€46.55 -
NF EN 60745-2-23, C75-745-2-23 (08/2013)
Hand-held motor-operated electric tools - Safety - Part 2-23 : particular requirements for die grinders and small rotary tools - Outils électroportatifs à moteur
8/1/2013 - Paper - French -
Learn More€103.33 -
NF ISO 236-2, E66-018 (08/2013)
Reamers - Part 2 : long fluted machine reamers with Morse taper shanks
8/1/2013 - Paper - French -
Learn More€48.00 -
NF ISO 5609-3, E66-346-3 (07/2013)
Tool holders for internal turning with cylindrical shank for indexable inserts - Part 3 : style K
7/1/2013 - Paper - French -
Learn More€46.50 -
NF ISO 5609-6, E66-346-6 (07/2013)
Tool holders for internal turning with cylindrical shank, for indexable inserts - Part 6 : style Q - Porte-plaquette de tournage intérieur, à queue cylindrique
7/1/2013 - Paper - French -
Learn More€48.00 -
NF ISO 5609-4, E66-346-4 (07/2013)
Tool holders for internal turning with cylindrical shank, for indexable inserts - Part 4 : style L
7/1/2013 - Paper - French -
Learn More€58.50 -
NF ISO 5609-5, E66-346-5 (07/2013)
Tool holders for internal turning with cylindrical shank, for indexable inserts - Part 5 : style U
7/1/2013 - Paper - French -
Learn More€48.00 -
NF ISO 513, E66-304 (01/2013)
Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application - Classification et application des matériaux durs de coupe pour enlèvement de métal avec arêtes coupantes définies
1/1/2013 - Paper - French -
Learn More€48.00 -
NF ISO 521, E66-013 (12/2011)
Machine chucking reamers with cylindrical shanks and Morse taper shanks
12/1/2011 - Paper - French -
Learn More€48.00 -
NF ISO 1641-2, E66-215-2 (08/2011)
End mills and slot drills - Part 2 : dimensions and designation of milling cutters with Morse taper shanks
8/1/2011 - Paper - French -
Learn More€46.50 -
NF ISO 1641-3, E66-215-3 (08/2011)
End mills and slot drills - Part 3 : dimensions and designation of milling cutters with 7/24 taper shanks
8/1/2011 - Paper - French -
Learn More€44.97 -
€23.00
-
NF EN ISO 28927-8, E90-321-8 (08/2010)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8 : saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action - Machines à moteur portatives
8/1/2010 - Paper - French -
Learn More€83.50 -
€25.67
-
XP ISO/TS 13399-100, E66-525-100 (03/2009)
Cutting tool data representation and exchange - Part 100 : definitions, principles and methods for reference dictionaries
3/1/2009 - Paper - French -
Learn More€144.67 -
€34.67
-
NF ISO 3338-3, E66-200-3 (11/2006)
Cylindrical shanks for milling cutters - Part 3 : dimensional characteristics of threaded shanks
11/1/2006 - Paper - French -
Learn More€32.49 -
€34.67
-
€34.50
-
NF ISO 9136-1, E75-231-1 (10/2005)
Abrasive grains - Determination of bulk density - Part 1 : macrogrits - Grains abrasifs
10/1/2005 - Paper - French -
Learn More€60.50 -
NF ISO 2586, E66-214 (03/2005)
Shell end mills with plain bore and tenon drive - Metric series - Fraises cylindriques 2 tailles, à alésage lisse, à entraînement par tenons
3/1/2005 - Paper - French -
Learn More€48.00 -
NF ISO 237, E20-014 (12/2002)
Rotating tools with parallel shanks - Diameters of shanks and sizes of driving squares - Outils tournants à queue cylindrique
12/1/2002 - Paper - French -
Learn More€60.50 -
NF E66-520-7 (11/2000) (R2010)
Working zones of cutting tools - Couple tool-material - Part 7 : application to drilling technology on solid - Domaine de fonctionnement des outils coupants
11/1/2000 - Paper - English, French -
Learn More€98.00 -
NF E66-520-8 (11/2000) (R2010)
Working zones of cutting tools - Couple tool-material - Part 8 : couple tool-material methodology in drilling on plain - Domaine de fonctionnement des outils coupants
11/1/2000 - Paper - English, French -
Learn More€168.00 -
NF ISO 241, E66-303 (09/2000)
Shanks for turning and planning tools - Shapes and dimensions of the section
9/1/2000 - Paper - French -
Learn More€48.00 -
NF ISO 603-2, E75-202-2 (12/1999)
Bonded abrasive products - Dimensions - Part 2 : grinding wheels for centreless external cylindrical grinding - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€73.23 -
NF ISO 603-4, E75-202-4 (12/1999)
Bonded abrasive products - Dimensions - Part 4 : grinding wheels for surface grinding/peripheral grinding - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€86.67 -
NF ISO 603-10, E75-202-10 (12/1999)
Bonded abrasive products - Dimensions - Part 10 : stones for honing and superfinishings - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€75.50 -
NF ISO 9136-2, E75-231-2 (12/1999)
Abrasive grains - Determination of bulk density - Part 2 : microgrits - Grains abrasifs
12/1/1999 - Paper - French -
Learn More€75.50 -
NF ISO 603-12, E75-202-12 (12/1999)
Bonded abrasive products - Dimensions - Part 12 : grinding wheels for deburring and fettling on a straight grinder - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€75.67 -
NF ISO 603-7, E75-202-7 (12/1999)
Bonded abrasive products - Dimensions - Part 7 : grinding wheels for manually guided grinding - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€75.50 -
NF ISO 603-14, E75-202-14 (12/1999)
Bonded abrasive products - Dimensions - Part 14 : grinding wheels for deburring and fettling/snagging on an angle grinder - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€70.75 -
NF ISO 603-9, E75-202-9 (12/1999)
Bonded abrasive products - Dimensions - Part 9 : grinding wheels for high-pressure grinding - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€60.50 -
NF ISO 603-5, E75-202-5 (12/1999)
Bonded abrasive products - Dimensions - Part 5 : grinding wheels for surface grinding/face grinding - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€83.50 -
NF ISO 603-11, E75-202-11 (12/1999)
Bonded abrasive products - Dimensions - Part 11 : hand finishing sticks - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€60.50 -
NF ISO 603-3, E75-202-3 (12/1999)
Bonded abrasive products - Dimensions - Part 3 : grinding wheels for internal cylindrical grinding - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€70.75 -
NF ISO 603-8, E75-202-8 (12/1999)
Bonded abrasive products - Dimensions - Part 8 : grinding wheels for deburring and fettling/snagging - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€60.50 -
NF ISO 603-16, E75-202-16 (12/1999)
Bonded abrasive products - Dimensions - Part 16 : grinding wheels for cutting-off on hand-held power tools - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€70.75 -
NF ISO 603-6, E75-202-6 (12/1999)
Bonded abrasive products - Dimensions - Part 6 : grinding wheels for tool and tool room grinding - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€75.67 -
NF ISO 603-13, E75-202-13 (12/1999)
Bonded abrasive products - Dimensions - Part 13 : grinding wheels for deburring and fettling on a vertical grinder - Produits abrasifs agglomérés
12/1/1999 - Paper - French -
Learn More€75.50 -
NF E66-520-5 (09/1999)
Working zones of cutting tools. Couple tool-material. Part 5 : application to milling technology. - Domaine de fonctionnement des outils coupants
9/1/1999 - Paper - English, French -
Learn More€98.00 -
NF E66-520-6 (09/1999)
Working zones of cutting tools. Couple tool-material. Part 6 : couple tool-material methodology procedures in milling. - Domaine de fonctionnement des outils coupants
9/1/1999 - Paper - English, French -
Learn More€140.00 -
NF E66-520-2 (09/1997) (R2002)
Working zones of cutting tools. Couple tool-material. Part 2 : general description. - Domaine de fonctionnement des outils coupants
9/1/1997 - Paper - English, French -
Learn More€78.50 -
NF E66-520-3 (09/1997) (R2002)
Working zones of cutting tools. Couple tool-material. Part 3 : application to turning technology. - Domaine de fonctionnement des outils coupants
9/1/1997 - Paper - English, French -
Learn More€78.50 -
NF E66-520-1 (09/1997) (R2002)
Working zones of cutting tools. Couple tool-material. Part 1 : general presentation. - Domaine de fonctionnement des outils coupants
9/1/1997 - Paper - English, French -
Learn More€54.50 -
NF E66-520-4 (09/1997) (R2002)
Working zones of cutting tools. Couple tool-material. Part 4 : couple tool-material metodology procedures in turning. - Domaine de fonctionnement des outils coupants
9/1/1997 - Paper - English, French -
Learn More€131.00 -
€48.00
-
€48.00
-
€144.50
-
NF ISO 3002-1, E66-502 (12/1993)
Basic quantities in cutting and grinding. Part 1 : geometry of the active part of cutting tools. General tems, reference systems, tool and working angles, chip breakers.
12/1/1993 - Paper - French -
Learn More€154.50 -
NF ISO 3002-5, E66-508 (05/1991) (R2002)
Basic quantities in cutting and grinding. Part 5 : basic terminology for grinding processes using grinding wheels. - Grandeurs de base en usinage et rectification
5/1/1991 - Paper - French -
Learn More€108.00 -
€34.67
-
NF E66-506 (06/1985) (R2010)
Basic quantities in cutting and grinding - Geometric and kinematic quantities in cutting
6/1/1985 - Paper - French -
Learn More€60.67 -
NF L06-510 (08/1983) (R2008)
Selection of end mills with shanks to be used in aerospace industry for numerical control machining of aluminium alloys.
8/1/1983 - Paper - French -
Learn More€25.50
