25.100.50 : Taps and threading dies
-
NBN ISO 2284:2021
Hand taps for parallel and taper pipe threads ? General dimensions and marking
6/7/2021 - PDF - French -
Learn More€58.00 -
NBN ISO 8051:2021
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess ISO 8051:2016
6/7/2021 - PDF - English -
Learn More€37.00 -
€121.00
-
NBN ISO 2284:2021
Hand taps for parallel and taper pipe threads — General dimensions and marking ISO 2284:2017
6/7/2021 - PDF - English -
Learn More€58.00 -
NBN ISO 8051:2021
Long shank taps with nominal diameters from M3 to M10 ? Full-diameter shank taps with recess
6/7/2021 - PDF - French -
Learn More€37.00 -
€121.00
-
DIN 382:2020-11
Hexagonal die-nuts - Dimensions, designation, material, type and labelling for hexagonal high-speed steel dies
11/1/2020 - PDF - German -
Learn More€59.63 -
€34.67
-
DIN 4000-80:2019-03
Tabular layouts of properties - Part 80: Screwing taps, cold forming taps and screwing dies
3/1/2019 - PDF - German -
Learn More€79.72 -
DIN 4003-80:2019-03
Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies.
3/1/2019 - PDF - German -
Learn More€92.62 -
NF ISO 2284, E66-120 (12/2017)
Hand taps for parallel and taper pipe threads - General dimensions and marking
12/1/2017 - Paper - French -
Learn More€48.00 -
€83.85
-
€293.00
-
BS ISO 2284:2017
Hand taps for parallel and taper pipe threads. General dimensions and marking
3/31/2017 - PDF - English -
Learn More€180.00 -
€148.00
-
€148.00
-
DIN EN ISO 4231:2017-03
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016), German Version EN ISO 4231:2016
3/1/2017 - PDF - English -
Learn More€66.07 -
DIN EN ISO 4231:2017-03
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016), German Version EN ISO 4231:2016
3/1/2017 - PDF - German -
Learn More€52.90 -
NF EN ISO 4231, E66-153 (03/2017)
Hand - and machine-operated circular screwing dies for parallel pipe threads - G series
3/1/2017 - Paper - French -
Learn More€33.62 -
DIN EN ISO 4230:2017-03
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
3/1/2017 - PDF - English -
Learn More€57.57 -
DIN EN ISO 4230:2017-03
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016), German version EN ISO 4230:2016
3/1/2017 - PDF - German -
Learn More€45.98 -
ISO 2284:2017 (R2022)
Hand taps for parallel and taper pipe threads
General dimensions and marking
2/24/2017 - Paper - English -
Learn More€72.00 -
ISO 2284:2017 (R2022)
Hand taps for parallel and taper pipe threads
General dimensions and marking
2/24/2017 - Paper - French -
Learn More€72.00 -
UNE-EN ISO 4231:2017
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)
2/22/2017 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 4230:2017
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
2/22/2017 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 4231:2017
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)
2/22/2017 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 4230:2017
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
2/22/2017 - PDF - English -
Learn More€62.40 -
NF EN ISO 4230, E66-154 (01/2017)
Hand - and machine-operated circular screwing dies for taper pipe threads - R series
1/1/2017 - Paper - French -
Learn More€33.62 -
BS EN ISO 4231:2016
Hand- and machine-operated circular screwing dies for parallel pipe threads. G series
12/31/2016 - PDF - English -
Learn More€151.00 -
NBN EN ISO 4230:2016
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
12/21/2016 - PDF - English -
Learn More€37.00 -
NBN EN ISO 4230:2016
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
12/21/2016 - PDF - French -
Learn More€37.00 -
NBN EN ISO 4231:2016
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)
12/21/2016 - PDF - German -
Learn More€37.00 -
NBN EN ISO 4230:2016
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
12/21/2016 - PDF - German -
Learn More€37.00 -
NBN EN ISO 4231:2016
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)
12/21/2016 - PDF - English -
Learn More€37.00 -
NBN EN ISO 4231:2016
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)
12/21/2016 - PDF - French -
Learn More€37.00 -
BS EN ISO 4230:2016
Hand- and machine-operated circular screwing dies for taper pipe threads. R series
11/30/2016 - PDF - English -
Learn More€151.00 -
ISO 4231:2016 (R2022)
Hand- and machine-operated circular screwing dies for parallel pipe threads
G series
10/14/2016 - Paper - French -
Learn More€48.00 -
ISO 4231:2016 (R2022)
Hand- and machine-operated circular screwing dies for parallel pipe threads
G series
10/14/2016 - Paper - English -
Learn More€48.00 -
ISO 4230:2016 (R2022)
Hand- and machine-operated circular screwing dies for taper pipe threads
R series
10/6/2016 - Paper - French -
Learn More€48.00 -
ISO 4230:2016 (R2022)
Hand- and machine-operated circular screwing dies for taper pipe threads
R series
10/6/2016 - Paper - English -
Learn More€48.00 -
BS ISO 8051:2016
Long shank taps with nominal diameters from M3 to M10. Full-diameter shank taps with recess
9/30/2016 - PDF - English -
Learn More€151.00 -
ISO 8051:2016 (R2023)
Long shank taps with nominal diameters from M3 to M10
Full-diameter shank taps with recess
9/19/2016 - Paper - French -
Learn More€48.00 -
ISO 8051:2016 (R2023)
Long shank taps with nominal diameters from M3 to M10
Full-diameter shank taps with recess
9/19/2016 - Paper - English -
Learn More€48.00 -
DIN 802-3:2016-03
Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
3/1/2016 - PDF - German -
Learn More€52.90 -
€39.35
-
DIN 376:2016-02
Machine screwing taps for coarse pitch metric ISO-threads M1,6 to M68
2/1/2016 - PDF - German -
Learn More€39.35 -
DIN 371:2016-01
Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0,2 to M10 × 1,25
1/1/2016 - PDF - German -
Learn More€45.98 -
DIN 352:2016-01
Sets of taps - Sets of 3 taps for metric coarse ISO-threads M1 to M68
1/1/2016 - PDF - German -
Learn More€45.98 -
DIN 374:2016-01
Machine screwing taps for fine pitch metric ISO-threads M3 × 0,2 to M52 × 4
1/1/2016 - PDF - German -
Learn More€39.35 -
€39.35
-
DIN 2175-2:2015-03
Cold-forming taps - Part 2: Technical delivery conditions for carbide cold-forming taps
3/1/2015 - PDF - German -
Learn More€52.90 -
DIN 2197-2:2015-03
Screwing taps - Part 2: Technical delivery conditions for ground carbide taps
3/1/2015 - PDF - German -
Learn More€79.72 -
DIN 2175-1:2015-03
Cold-forming taps - Part 1: Technical delivery conditions for high-speed steel cold-forming taps
3/1/2015 - PDF - German -
Learn More€59.63 -
DIN 2197-1:2015-03
Screwing taps - Part 1: Technical delivery conditions for ground high-speed steel taps
3/1/2015 - PDF - German -
Learn More€79.72 -
DIN 2184-1:2015-02
Taps and cold forming taps - Part 1: Long type, General plan of dimensions
2/1/2015 - PDF - German -
Learn More€39.35 -
DIN 802-4:2012-01
Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion
1/1/2012 - PDF - German -
Learn More€65.89 -
DIN EN 61029-2-12 VDE 0740-512:2011-12
Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines (IEC 61029-2-12:2010, modified), German version EN 61029-2-12:2011
12/1/2011 - - -
Learn MoreFrom: €53.63 -
DIN 5157:2011-07
Sets of taps - Sets of 2 taps for pipe threads G 1/16 to G 4 and Rp 1/16 to Rp 4
7/1/2011 - PDF - German -
Learn More€39.35 -
IEC 61029-2-12:2010
IEC 61029-2-12:2010 Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines
5/26/2010 - PDF - English, French -
Learn More€92.00 -
ASME B18.29.1-2010 (R2017)
Helical Coil Screw Thread Inserts--Free Running and Screw Locking (Inch Series)
1/1/2010 - PDF DRM - English -
Learn More€41.00 -
€25.00
-
€25.00
-
DIN 40432:2008-11
Sets of taps - Sets of 2 taps for steel conduit thread Pg 7 to Pg 48
11/1/2008 - PDF - German -
Learn More€32.34 -
€32.34
-
€22.99
-
DIN 5156:2008-11
Machine taps for pipe threads G 1/16 to G 2 and Rp 1/16 to Rp 2
11/1/2008 - PDF - German -
Learn More€32.34 -
DIN 2174:2008-11
Cold-forming taps for ISO metric coarse pitch thread M2 to M39 and ISO metric fine pitch thread M3 × 0,25 to M52 × 4 - Dimensions
11/1/2008 - PDF - German -
Learn More€39.35 -
ASME B18.29.2M-2005 (R2017)
Helical Coil Screw Thread Inserts: Free Running and Screw Locking (Metric Series)
1/1/2005 - PDF DRM - English -
Learn More€37.00 -
DIN 2184-2:2003-12
Taps and cold forming taps - Part 2: Short type; General plan of dimensions
12/1/2003 - PDF - German -
Learn More€45.98 -
DIN 2184-2:2003-12
Taps and cold forming taps - Part 2: Short type; General plan of dimensions
12/1/2003 - PDF - English -
Learn More€57.57 -
DIN 802-6:2003-07
Manufacturing to tolerances on the threaded portion of screwing taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts as in DIN 8140 for ISO metric coarse and fine pitch threads
7/1/2003 - PDF - German -
Learn More€52.90 -
€59.63
-
DIN 40435:2003-07
Machine taps for the tapped holes (EG) for wire thread inserts for ISO metric screw threads according to DIN 8140 - Coarse pitch threads EG M2 to EG M52 and fine pitch threads EG M8 × 1 to EG M48 × 3 - Dimensions
7/1/2003 - PDF - German -
Learn More€39.35 -
€74.58
-
€41.86
-
€36.27
-
€46.02
-
€41.86
-
€0.00
-
ISO 2283:2000 (R2023)
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in
Reduced shank taps
3/23/2000 - Paper - English -
Learn More€72.00 -
ISO 2283:2000 (R2023)
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in
Reduced shank taps
3/23/2000 - Paper - French -
Learn More€72.00 -
€41.86
-
€41.86
-
JIS B 4456:1998 (R2014)
Hand-and machine-operated circular screwing dies for taper pipe threads
8/20/1998 - PDF - Japanese -
Learn More€25.00 -
€36.27
-
€52.91
-
JIS B 4455:1998 (R2014)
Hand-and machine-operated circular screwing dies for parallel pipe threads
8/20/1998 - PDF - Japanese -
Learn More€25.00 -
€25.00
-
DIN 802-5:1997-02
Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion
2/1/1997 - PDF - English -
Learn More€57.57 -
DIN 802-5:1997-02
Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion
2/1/1997 - PDF - German -
Learn More€45.98 -
€25.00
-
€25.00
-
BS 949-2:1992
Screwing taps Specification for unified ground thread taps. Manufacturing tolerances
12/15/1992 - PDF - English -
Learn More€180.00 -
€37.00
-
NBN EN 22857:1992
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion (ISO 2857:1973 + A1:1984 +A2:1986)
7/23/1992 - PDF - French -
Learn More€89.00 -
NBN EN 25967:1992
Taps and thread cutting - Nomenclature of the main types and terminology (ISO 5967:1981)
7/23/1992 - PDF - English -
Learn More€121.00 -
NBN EN 22568:1992
Hand- and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988)
7/23/1992 - PDF - French -
Learn More€58.00 -
NBN EN 25967:1992
Taps and thread cutting - Nomenclature of the main types and terminology (ISO 5967:1981)
7/23/1992 - PDF - French -
Learn More€121.00 -
€37.00
-
NBN EN 22857:1992
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion (ISO 2857:1973 + A1:1984 +A2:1986)
7/23/1992 - PDF - Dutch -
Learn More€89.00 -
€37.00
-
NBN EN 22568:1992
Hand- and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988)
7/23/1992 - PDF - Dutch -
Learn More€58.00 -
NBN EN 25967:1992
Taps and thread cutting - Nomenclature of the main types and terminology (ISO 5967:1981)
7/23/1992 - PDF - German -
Learn More€121.00 -
ISO 8830:1991 (R2018)
High-speed steel machine taps with ground threads
Technical specifications
10/17/1991 - Paper - English -
Learn More€48.00 -
ISO 8830:1991 (R2018)
High-speed steel machine taps with ground threads
Technical specifications
10/17/1991 - Paper - French -
Learn More€48.00 -
€34.00
-
UNE 16606:1991 (R2012)
HAND AND MACHINES OPERATED CIRCULAR SCREWING DIES AND HAND OPERATED DIE STOCKS.
1/10/1991 - PDF - English -
Learn More€75.60 -
UNE 16603:1991 (R2012)
TAPS AND THREAD CUTTING. NOMENCLATURE OF THE MAIN TYPES AND TERMINOLOGY.
1/10/1991 - PDF - Spanish -
Learn More€68.00 -
UNE 16605:1991 (R2012)
GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES. MANUFACTURING TOLERANCES ON THE THREADED PORTION.
1/10/1991 - PDF - English -
Learn More€84.00 -
€40.80
-
UNE 16603:1991 (R2012)
TAPS AND THREAD CUTTING. NOMENCLATURE OF THE MAIN TYPES AND TERMINOLOGY.
1/10/1991 - PDF - English -
Learn More€81.60 -
UNE 16606:1991 (R2012)
HAND AND MACHINES OPERATED CIRCULAR SCREWING DIES AND HAND OPERATED DIE STOCKS.
1/10/1991 - PDF - Spanish -
Learn More€63.00 -
UNE 16605:1991 (R2012)
GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES. MANUFACTURING TOLERANCES ON THE THREADED PORTION.
1/10/1991 - PDF - Spanish -
Learn More€70.00 -
ISO 5969:1979/Cor 1:1991
Ground thread taps for pipe threads G series and Rp series
Tolerances on the threaded portion
1/1/1991 - Paper - English -
Learn More€0.00 -
ISO 5969:1979/Cor 1:1991
Ground thread taps for pipe threads G series and Rp series
Tolerances on the threaded portion
1/1/1991 - Paper - French -
Learn More€0.00 -
ISO 2857:1973/Cor 1:1990
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
10/12/1990 - Paper - English -
Learn More€0.00 -
DIN EN 25967:1990-07
Taps for thread cutting; nomenclature of the main types and terminology (ISO 5967:1981); german version EN 25967:1989
7/1/1990 - PDF - English, French, German -
Learn More€85.79 -
€25.00
-
DIN EN 25968:1990-07
Circular screwing dies; terminology (ISO 5968:1981); german version EN 25968:1989
7/1/1990 - PDF - English -
Learn More€66.07 -
DIN EN 25967:1990-07
Taps for thread cutting; nomenclature of the main types and terminology (ISO 5967:1981); german version EN 25967:1989
7/1/1990 - PDF - English -
Learn More€107.48 -
DIN EN 22857:1990-07
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986); german version EN 22857:1989
7/1/1990 - PDF - German -
Learn More€85.79 -
DIN EN 25968:1990-07
Circular screwing dies; terminology (ISO 5968:1981); german version EN 25968:1989
7/1/1990 - PDF - English, French, German -
Learn More€52.90 -
BS 949-4:1990
Screwing taps Specification for metric ground thread taps: manufacturing tolerances
6/29/1990 - PDF - English -
Learn More€250.00 -
€151.00
-
€250.00
-
BS 1127-5:1990
Screwing dies and dienuts Specification for dimensions of hexagon
6/29/1990 - PDF - English -
Learn More€151.00 -
BS 1127-1:1990
Screwing dies and dienuts Specification for hand- machine-operated circular screwing hand-operated die stocks
6/29/1990 - PDF - English -
Learn More€180.00 -
DIN EN 22568:1990-06
Hand and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988); german version EN 22568:1989
6/1/1990 - PDF - English -
Learn More€99.44 -
DIN EN 22568:1990-06
Hand and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988); german version EN 22568:1989
6/1/1990 - PDF - German -
Learn More€79.72 -
€79.88
-
ISO 2568:1988 (R2023)
Hand- and machine-operated circular screwing dies and hand-operated die stocks
General information
11/24/1988 - Paper - French -
Learn More€72.00 -
ISO 2568:1988 (R2023)
Hand- and machine-operated circular screwing dies and hand-operated die stocks
General information
11/24/1988 - Paper - English -
Learn More€72.00 -
€48.00
-
€48.00
-
€39.35
-
ISO 2857:1973/Amd 2:1986
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
9/25/1986 - Paper - English -
Learn More€21.00 -
ISO 2857:1973/Amd 2:1986
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
9/25/1986 - Paper - French -
Learn More€21.00 -
€34.67
-
ISO 2857:1973/Amd 1:1984
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
7/1/1984 - Paper - English -
Learn More€21.00 -
ISO 2857:1973/Amd 1:1984
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
7/1/1984 - Paper - French -
Learn More€21.00 -
ISO 5407:1981 (R2019)
As-sintered hardmetal pellets used in heading dies
Dimensions and tolerances
10/1/1981 - Paper - French -
Learn More€48.00 -
ISO 5407:1981 (R2019)
As-sintered hardmetal pellets used in heading dies
Dimensions and tolerances
10/1/1981 - Paper - English -
Learn More€48.00 -
ISO 5969:1979 (R2022)
Ground thread taps for pipe threads G series and Rp series
Tolerances on the threaded portion
10/1/1979 - Paper - French -
Learn More€72.00 -
ISO 5969:1979 (R2022)
Ground thread taps for pipe threads G series and Rp series
Tolerances on the threaded portion
10/1/1979 - Paper - English -
Learn More€72.00 -
€22.99
-
€28.60
-
BS 1813:1974
Specification for dimensions of conduit dies, diestocks and guides
5/17/1974 - PDF - English -
Learn More€151.00 -
ISO 2857:1973 (R2022)
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
12/1/1973 - Paper - English -
Learn More€110.00 -
ISO 2857:1973 (R2022)
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches
Manufacturing tolerances on the threaded portion
12/1/1973 - Paper - French -
Learn More€110.00 -
BS 3409-2:1966 (R2013)
Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) Diameters below ¼ in
1/31/1966 - PDF - English -
Learn More€151.00 -
BS 3409-1:1961 (R2013)
Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) Diameters ¼ in over
8/16/1961 - PDF - English -
Learn More€180.00