25.100.20 : Milling tools

Items 1 to 200 of 297 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  • BS ISO 2780:2018 + Redline

    Tracked Changes. Milling cutters with tenon drive. Interchangeability dimensions for cutter arbors. Metric series
    2/27/2020 - PDF - English - BSI
    Learn More
    €169.46

  • BS ISO 1641-1:2016 + Redline

    Tracked Changes. End mills and slot drills Milling cutters with cylindrical shanks
    2/26/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS ISO 12197:2016 + Redline

    Tracked Changes. Woodruff keyseat cutters. Dimensions
    2/26/2020 - PDF - English - BSI
    Learn More
    €169.46

  • NF ISO 2780, E66-204 (12/2018)

    Fraises à métaux à entraînement par tenons - Dimensions d'interchangeabilité avec les mandrins porte-fraise - Série métrique
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €40.69

  • DIN 6529:2018-10

    Parallel shank solid hardmetal end mills - Technical delivery conditions
    10/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • BS ISO 2780:2018

    Milling cutters with tenon drive. Interchangeability dimensions for cutter arbors. Metric series
    9/25/2018 - PDF - English - BSI
    Learn More
    €130.35

  • ISO 2780:2018

    Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series
    9/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2780:2018

    Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series
    9/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • NF ISO 10911, E66-265 (11/2017)

    Solid hardmetal end mills with cylindrical shank - Dimensions - Fraises cylindriques deux tailles monobloc en métaux-durs - Dimensions
    11/1/2017 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF ISO 2584, E66-207 (11/2017)

    Cylindrical cutters with plain bore and key drive - Metric series - Fraises cylindriques 1 taille, à surfacer, à alésage lisse, à entraînement par clavette - Série métrique
    11/1/2017 - Paper - French - AFNOR
    Learn More
    €29.39

  • BS ISO 10911:2017

    Solid hardmetal end mills with cylindrical shank. Dimensions
    9/18/2017 - PDF - English - BSI
    Learn More
    €130.35

  • DIN 3973-2:2017-09

    Tolerances of worm wheel hobs - Part 2: Tolerances for deviation of individual parameters
    9/1/2017 - PDF - German - DIN
    Learn More
    €54.80

  • ISO 10911:2017

    Solid hardmetal end mills with cylindrical shank — Dimensions
    6/1/2017 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10911:2017

    Solid hardmetal end mills with cylindrical shank — Dimensions
    6/1/2017 - Paper - French - ISO
    Learn More
    €40.00

  • DIN 3973-1:2017-02

    Tolerances of worm wheel hobs - Part 1: Fundamental principles
    2/1/2017 - PDF - German - DIN
    Learn More
    €82.60

  • BS ISO 12197:2016

    Woodruff keyseat cutters. Dimensions
    11/30/2016 - PDF - English - BSI
    Learn More
    €130.35

  • NF ISO 1641-1, E66-215-1 (11/2016)

    End mills and slot drills - Part 1 : milling cutters with cylindrical shanks - End mills and slot drills - Part 1: Milling cutters with cylindrical shanks
    11/1/2016 - Paper - French - AFNOR
    Learn More
    €40.69

  • ISO 12197:2016

    Woodruff keyseat cutters — Dimensions
    11/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 12197:2016

    Woodruff keyseat cutters — Dimensions
    11/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • BS ISO 2584:2016

    Cylindrical cutters with plain bore and key drive. Metric series
    10/31/2016 - PDF - English - BSI
    Learn More
    €130.35

  • DIN 4000-141:2016-10

    Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears
    10/1/2016 - PDF - German - DIN
    Learn More
    €108.80

  • NF ISO 240, E66-202 (10/2016)

    Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels - Fraises à métaux - Dimensions d'interchangeabilité avec les arbres porte-fraises ou les mandrins porte-fraise
    10/1/2016 - Paper - French - AFNOR
    Learn More
    €40.69

  • ISO 2584:2016

    Cylindrical cutters with plain bore and key drive — Metric series
    10/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2584:2016

    Cylindrical cutters with plain bore and key drive — Metric series
    10/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • BS ISO 240:2016

    Milling cutters. Interchangeability dimensions for cutter arbors or cutter mandrels
    8/31/2016 - PDF - English - BSI
    Learn More
    €130.35

  • ISO 240:2016

    Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
    8/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 240:2016

    Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
    8/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 1641-1:2016

    End mills and slot drills — Part 1: Milling cutters with cylindrical shanks
    8/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 1641-1:2016

    End mills and slot drills — Part 1: Milling cutters with cylindrical shanks
    8/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • BS ISO 1641-1:2016

    End mills and slot drills Milling cutters with cylindrical shanks
    7/31/2016 - PDF - English - BSI
    Learn More
    €154.05

  • NF ISO 10145-2, E66-280-2 (06/2016)

    End mills with brazed helical hardmetal tips - Part 2 : Dimensions of end mills with 7/24 taper shank - Fraises cylindriques deux tailles à plaquettes hélicoïdales en métaux-durs, brasées - Partie 2 : Dimensions des fraises à queue cône 7/24
    6/1/2016 - Paper - French - AFNOR
    Learn More
    €29.39

  • NF ISO 10145-1, E66-280-1 (06/2016)

    End mills with brazed helical harmetal tips - Part 1 : dimensions of end mills with parallel shank - Fraises cylindriques deux tailles à plaquettes hélicoïdales en métaux-durs, brasées - Partie 1 : dimensions des fraises à queue cylindrique
    6/1/2016 - Paper - French - AFNOR
    Learn More
    €29.39

  • BS ISO 10145-1:2016

    End mills with brazed helical hardmetal tips Dimensions of end parallel shank
    3/31/2016 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 10145-2:2016

    End mills with brazed helical hardmetal tips Dimensions of end 7/24 taper shank
    3/31/2016 - PDF - English - BSI
    Learn More
    €130.35

  • ISO 10145-1:2016

    End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank
    3/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10145-1:2016

    End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank
    3/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 10145-2:2016

    End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank
    3/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 10145-2:2016

    End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank
    3/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • DIN ISO 11529:2014-10

    Milling cutters - Designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges (ISO 11529:2013)
    10/1/2014 - - - DIN
    Learn More
    From: €82.60

  • NF ISO 6262-1, E66-252-1 (02/2014)

    End mills with indexable inserts - Part 1 : end mills with flatted cylindrical shank
    2/1/2014 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF ISO 6262-2, E66-252-2 (02/2014)

    End mills with indexable inserts - Part 2 : end mills with Morse taper shank
    2/1/2014 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF ISO 3338-2, E66-200-2 (01/2014)

    Cylindrical shanks for milling cutters - Part 2 : dimensional characteristics of flatted cylindrical shanks
    1/1/2014 - Paper - French - AFNOR
    Learn More
    €40.69

  • DIN 4003-88:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 88: Milling cutter with arbor hole for indexable inserts
    12/1/2013 - PDF - German - DIN
    Learn More
    €175.40

  • DIN 4003-83:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 83: Milling cutter with arbor hole and non-indexable cutting edges
    12/1/2013 - PDF - German - DIN
    Learn More
    €125.30

  • JIS B 4119:2013

    Solid hardmetal corner radii end mills with cylindrical shanks - Dimensions
    11/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4118:2013

    Solid hardmetal ball-nosed end mills with cylindrical shanks - Dimensions
    11/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • BS ISO 7755-10:2013

    Hardmetal burrs Conical round- (ball-) nose (style L)
    9/30/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 6262-1:2013

    End mills with indexable inserts flatted cylindrical shank
    9/30/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 6262-2:2013

    End mills with indexable inserts Morse taper shank
    9/30/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 6986:2013

    Side and face milling (slotting) cutters with indexable inserts. Dimensions
    9/30/2013 - PDF - English - BSI
    Learn More
    €130.35

  • ISO 6262-1:2013

    End mills with indexable inserts — Part 1: End mills with flatted cylindrical shank
    9/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 6262-1:2013

    End mills with indexable inserts — Part 1: End mills with flatted cylindrical shank
    9/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 6262-2:2013

    End mills with indexable inserts — Part 2: End mills with Morse taper shank
    9/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 6262-2:2013

    End mills with indexable inserts — Part 2: End mills with Morse taper shank
    9/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 6986:2013

    Side and face milling (slotting) cutters with indexable inserts — Dimensions
    9/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 6986:2013

    Side and face milling (slotting) cutters with indexable inserts — Dimensions
    9/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • BS ISO 3338-2:2013

    Cylindrical shanks for milling cutters Dimensional characteristics of flatted cylindrical
    8/31/2013 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 7755-2:2013

    Hardmetal burrs Cylindrical (style A)
    8/31/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 7755-3:2013

    Hardmetal burrs Cylindrical round- (ball-) nose (style C)
    8/31/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 7755-4:2013

    Hardmetal burrs Spherical (style D)
    8/31/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 7755-5:2013

    Hardmetal burrs Oval (style E)
    8/31/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 7755-6:2013

    Hardmetal burrs Arch round- (ball-) nose (style F)
    8/31/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 7755-7:2013

    Hardmetal burrs Arch pointed-nose (style G)
    8/31/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 7755-8:2013

    Hardmetal burrs Flame (style H)
    8/31/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 7755-9:2013

    Hardmetal burrs 60 degrees and 90 cone (styles J K)
    8/31/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 7755-11:2013

    Hardmetal burrs Conical pointed-nose (style M)
    8/31/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 7755-12:2013

    Hardmetal burrs Inverted cone (style N)
    8/31/2013 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 7755-1:2013

    Hardmetal burrs General specifications
    8/31/2013 - PDF - English - BSI
    Learn More
    €154.05

  • DIN 4003-82:2013-08

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 82: End mills with non-indexable cutting edges
    8/1/2013 - PDF - German - DIN
    Learn More
    €163.80

  • NF ISO 11529, E66-266 (08/2013)

    Milling cutter - Designation - Shank-type and bore type milling cutters of solid or tipped design or with indexable cutting edges - Fraises
    8/1/2013 - Paper - French - AFNOR
    Learn More
    €64.01

  • NF ISO 15917, E66-262 (08/2013)

    Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
    8/1/2013 - Paper - French - AFNOR
    Learn More
    €40.69

  • ISO 7755-1:2013

    Hardmetal burrs — Part 1: General specifications
    8/1/2013 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 7755-1:2013

    Hardmetal burrs — Part 1: General specifications
    8/1/2013 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 7755-1:2013

    Hardmetal burrs — Part 1: General specifications
    8/1/2013 - Paper - Russian - ISO
    Learn More
    €61.00

  • ISO 7755-2:2013

    Hardmetal burrs — Part 2: Cylindrical burrs (style A)
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 7755-2:2013

    Hardmetal burrs — Part 2: Cylindrical burrs (style A)
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 7755-2:2013

    Hardmetal burrs — Part 2: Cylindrical burrs (style A)
    8/1/2013 - Paper - Russian - ISO
    Learn More
    €40.00

  • ISO 7755-3:2013

    Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 7755-3:2013

    Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 7755-4:2013

    Hardmetal burrs — Part 4: Spherical burrs (style D)
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 7755-4:2013

    Hardmetal burrs — Part 4: Spherical burrs (style D)
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 7755-5:2013

    Hardmetal burrs — Part 5: Oval burrs (style E)
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 7755-5:2013

    Hardmetal burrs — Part 5: Oval burrs (style E)
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 7755-6:2013

    Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 7755-6:2013

    Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 7755-7:2013

    Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 7755-7:2013

    Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 7755-8:2013

    Hardmetal burrs — Part 8: Flame burrs (style H)
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 7755-8:2013

    Hardmetal burrs — Part 8: Flame burrs (style H)
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 7755-9:2013

    Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 7755-9:2013

    Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 7755-10:2013

    Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 7755-10:2013

    Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 7755-11:2013

    Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 7755-11:2013

    Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 7755-12:2013

    Hardmetal burrs — Part 12: Inverted cone burrs (style N)
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 7755-12:2013

    Hardmetal burrs — Part 12: Inverted cone burrs (style N)
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 3338-2:2013

    Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
    8/1/2013 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 3338-2:2013

    Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
    8/1/2013 - Paper - French - ISO
    Learn More
    €40.00

  • BS ISO 11529:2013

    Milling cutters. Designation. Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
    4/30/2013 - PDF - English - BSI
    Learn More
    €154.05

  • DIN 4003-87:2013-02

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 87: End mills for indexable inserts
    2/1/2013 - PDF - German - DIN
    Learn More
    €209.50

  • ISO 11529:2013

    Milling cutters — Designation — Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
    1/1/2013 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 11529:2013

    Milling cutters — Designation — Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
    1/1/2013 - Paper - French - ISO
    Learn More
    €92.00

  • BS ISO 15917:2012

    Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
    7/31/2012 - PDF - English - BSI
    Learn More
    €130.35

  • ISO 15917:2012

    Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
    7/1/2012 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 15917:2012

    Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
    7/1/2012 - Paper - French - ISO
    Learn More
    €61.00

  • DIN 4000-88:2011-12

    Tabular layouts of properties - Part 88: Milling cutter with arbor hole for indexable inserts
    12/1/2011 - PDF - German - DIN
    Learn More
    €82.60

  • DIN 4000-87:2011-12

    Tabular layouts of properties - Part 87: End mills for indexable inserts
    12/1/2011 - PDF - German - DIN
    Learn More
    €89.00

  • DIN 4000-82:2011-08

    Tabular layouts of properties - Part 82: End mills with non-indexable cutting edges
    8/1/2011 - PDF - German - DIN
    Learn More
    €96.00

  • NF ISO 1641-2, E66-215-2 (08/2011)

    End mills and slot drills - Part 2 : dimensions and designation of milling cutters with Morse taper shanks
    8/1/2011 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF ISO 3860, E66-216 (08/2011)

    Bore cutters with key drive - Form milling cutters with constant profile - Fraises à alésage lisse à entraînement par clavette
    8/1/2011 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF ISO 1641-3, E66-215-3 (08/2011)

    End mills and slot drills - Part 3 : dimensions and designation of milling cutters with 7/24 taper shanks
    8/1/2011 - Paper - French - AFNOR
    Learn More
    €40.69

  • BS ISO 1641-2:2011

    End mills and slot drills Dimensions designation of milling cutters with Morse taper shanks
    7/31/2011 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 1641-3:2011

    End mills and slot drills Dimensions designation of milling cutters with 7/24 taper shanks
    7/31/2011 - PDF - English - BSI
    Learn More
    €154.05

  • NF ISO 6462, E66-253 (07/2011)

    Face and shoulder milling cutters with indexable inserts - Dimensions - Fraises à surfacer et à surfacer et dresser, à plaquettes amovibles
    7/1/2011 - Paper - French - AFNOR
    Learn More
    €51.24

  • BS ISO 6462:2011

    Face and shoulder milling cutters with indexable inserts. Dimensions
    6/30/2011 - PDF - English - BSI
    Learn More
    €154.05

  • ISO 1641-2:2011

    End mills and slot drills — Part 2: Dimensions and designation of milling cutters with Morse taper shanks
    6/1/2011 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 1641-2:2011

    End mills and slot drills — Part 2: Dimensions and designation of milling cutters with Morse taper shanks
    6/1/2011 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 1641-3:2011

    End mills and slot drills — Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
    6/1/2011 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 1641-3:2011

    End mills and slot drills — Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
    6/1/2011 - Paper - French - ISO
    Learn More
    €61.00

  • BS ISO 3860:2011

    Bore cutters with key drive. Form milling cutters with constant profile
    5/31/2011 - PDF - English - BSI
    Learn More
    €130.35

  • DIN 4000-83:2011-05

    Tabular layouts of properties - Part 83: Milling cutter with arbor hole and non-indexable cutting edges
    5/1/2011 - PDF - German - DIN
    Learn More
    €89.00

  • ISO 3860:2011

    Bore cutters with key drive — Form milling cutters with constant profile
    5/1/2011 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 3860:2011

    Bore cutters with key drive — Form milling cutters with constant profile
    5/1/2011 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 6462:2011

    Face and shoulder milling cutters with indexable inserts — Dimensions
    5/1/2011 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 6462:2011

    Face and shoulder milling cutters with indexable inserts — Dimensions
    5/1/2011 - Paper - French - ISO
    Learn More
    €61.00

  • VDI/VDE 2606 Blatt 1:2010-06 (R2015)

    Measurement of gearing tools - Measuring of hobs
    6/1/2010 - PDF - English, German - VDI
    Learn More
    €144.69

  • NF E66-243 (05/2010)

    Single angle milling cutters with key drive
    5/1/2010 - Paper - French - AFNOR
    Learn More
    €21.90

  • JIS B 4232/AMENDMENT 1:2009 (R2013)

    Involute gear milling cutters (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4220/AMENDMENT 1:2009 (R2013)

    Screw Slotting Cutters (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4221/AMENDMENT 1:2009 (R2013)

    Milling cutters - Angle milling cutters (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4236/AMENDMENT 1:2009 (R2013)

    Milling cutters - Counterbores for hexagon socket head bolts (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4107/AMENDMENT 1:2009 (R2013)

    Side milling cutters with brazed hardmetal tips (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4204/AMENDMENT 1:2009 (R2013)

    Milling cutters - Cylindrical milling cutters (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4210/AMENDMENT 1:2009 (R2013)

    Tapered end mills (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4211/AMENDMENT 1:2009 (R2013)

    End mills with parallel peripheral cutting edges (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4213/AMENDMENT 1:2009 (R2013)

    Tapered end mills for trapeziform runner with parallel shanks (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4214/AMENDMENT 1:2009 (R2013)

    Milling cutters - Shell end mills with plain bore and tenon drive (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4217/AMENDMENT 1:2009 (R2013)

    Milling cutters - T-slot cutters (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF E66-240 (06/2008)

    Face or shoulder insert tooth cutters with tenon drive
    6/1/2008 - Paper - French - AFNOR
    Learn More
    €29.39

  • NF ISO 3859, E66-231 (05/2007)

    Inverse dovetail cutters and dovetail cutters with cylindrical shanks
    5/1/2007 - Paper - French - AFNOR
    Learn More
    €29.39

  • NF ISO 22037, E66-263 (04/2007)

    Solid end mills with corner radii and cylindrical shanks made of hard cutting materials - Dimensions - Fraises toriques deux tailles monobloc, à queue cylindrique, en matériaux durs de coupe
    4/1/2007 - Paper - French - AFNOR
    Learn More
    €40.69

  • BS ISO 22037:2007

    Solid end mills with corner radii and cylindrical shanks made of hard cutting materials. Dimensions
    3/30/2007 - PDF - English - BSI
    Learn More
    €130.35

  • ISO 22037:2007

    Solid end mills with corner radii and cylindrical shanks made of hard cutting materials — Dimensions
    2/1/2007 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 22037:2007

    Solid end mills with corner radii and cylindrical shanks made of hard cutting materials — Dimensions
    2/1/2007 - Paper - French - ISO
    Learn More
    €40.00

  • NF E66-239 (11/2006)

    Inserted tooth cutters with 7/24 taper shank
    11/1/2006 - Paper - French - AFNOR
    Learn More
    €29.39

  • NF ISO 3338-3, E66-200-3 (11/2006)

    Cylindrical shanks for milling cutters - Part 3 : dimensional characteristics of threaded shanks
    11/1/2006 - Paper - French - AFNOR
    Learn More
    €29.39

  • NF ISO 3337, E66-230 (11/2006)

    T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
    11/1/2006 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF ISO 2586, E66-214 (03/2005)

    Shell end mills with plain bore and tenon drive - Metric series - Fraises cylindriques 2 tailles, à alésage lisse, à entraînement par tenons
    3/1/2005 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF ISO 2940-1, E66-248-1 (01/2004)

    Milling cutters mounted on centring arbors having a 7/24 taper - Fitting dimensions - Part 1 : centring arbors - Fraises à surfacer et à surfacer et dresser, à montage direct sur nez de broches à conicité 7/24
    1/1/2004 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF ISO 2940-2, E66-248-2 (01/2004)

    Milling cutters mounted on centring arbors having a 7/24 taper - Part 2 : inserted tooth cutters
    1/1/2004 - Paper - French - AFNOR
    Learn More
    €51.24

  • DIN 8589-3:2003-09

    Manufacturing processes chip removal - Part 3: Milling; Classification, subdivision, terms and definitions
    9/1/2003 - PDF - German - DIN
    Learn More
    €61.70

  • NF ISO 3940, E66-208 (09/2003)

    Tapered die-sinking cutters with parallel shanks
    9/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • DIN 1880-2:2003-09

    Shell end mills with tenon and parallel key drive - Part 2: Technical delivery conditions
    9/1/2003 - - - DIN
    Learn More
    From: €54.80

  • UNE-EN ISO 15641:2002

    Milling cutters for high speed machining - Safety requirements. (ISO 15641:2001).
    7/29/2002 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • DIN 6527:2002-01

    Solid hardmetal end mills with stepped parallel shank - Dimensions
    1/1/2002 - - - DIN
    Learn More
    From: €40.80

  • DIN 6528:2002-01

    Solid hardmetal end mills with continuous parallel shank - Dimensions
    1/1/2002 - - - DIN
    Learn More
    From: €40.80

  • DIN EN ISO 15641:2001-12

    Milling cutters for high speed machining - Safety requirements (ISO 15641:2001); German version EN ISO 15641:2001
    12/1/2001 - - - DIN
    Learn More
    From: €75.40

  • NBN EN ISO 15641:2001

    Milling cutters for high speed machining - Safety requirements (ISO 15641:2001)
    11/14/2001 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN ISO 15641:2001

    Milling cutters for high speed machining - Safety requirements (ISO 15641:2001)
    11/14/2001 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN ISO 15641:2001

    Milling cutters for high speed machining - Safety requirements (ISO 15641:2001)
    11/14/2001 - PDF - French - NBN
    Learn More
    €56.00

  • NF EN ISO 15641, E66-270 (11/2001)

    Milling cutters for high speed machining - Safety requirements
    11/1/2001 - Paper - French - AFNOR
    Learn More
    €73.30

  • BS EN ISO 15641:2001

    Milling cutters for high speed machining. Safety requirements
    9/24/2001 - PDF - English - BSI
    Learn More
    €154.05

  • ISO 15641:2001

    Milling cutters for high speed machining — Safety requirements
    9/1/2001 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 15641:2001

    Milling cutters for high speed machining — Safety requirements
    9/1/2001 - Paper - French - ISO
    Learn More
    €61.00

  • DIN 1835-2:2000-11

    Parallel shanks for milling cutters - Part 2: Connecting dimensions for holder chucks, accessories
    11/1/2000 - - - DIN
    Learn More
    From: €47.60

  • ISO 3859:2000

    Inverse dovetail cutters and dovetail cutters with cylindrical shanks
    8/1/2000 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 3859:2000

    Inverse dovetail cutters and dovetail cutters with cylindrical shanks
    8/1/2000 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 3337:2000

    T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
    7/1/2000 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 3337:2000

    T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
    7/1/2000 - Paper - French - ISO
    Learn More
    €40.00

  • UNE 16004:2000

    Milling cutters. Interchangeability dimensions for cutter arbors or cutter mandrels.
    1/28/2000 - PDF - Spanish - AENOR
    Learn More
    €31.00

  • UNE 16011:2000

    Cylindrical shanks for milling cutters. Part 1: Dimensional characteristics of plain cylindrical shanks.
    1/28/2000 - PDF - Spanish - AENOR
    Learn More
    €12.00

  • UNE 16012:2000

    Cylindrical shanks for milling cutters. Part 2: Dimensional characteristics of flatted cylindrical shanks.
    1/28/2000 - PDF - Spanish - AENOR
    Learn More
    €13.00

  • NF E66-520-5 (09/1999)

    Working zones of cutting tools. Couple tool-material. Part 5 : application to milling technology. - Domaine de fonctionnement des outils coupants
    9/1/1999 - Paper - English, French - AFNOR
    Learn More
    €91.50

  • NF E66-520-6 (09/1999)

    Working zones of cutting tools. Couple tool-material. Part 6 : couple tool-material methodology procedures in milling. - Domaine de fonctionnement des outils coupants
    9/1/1999 - Paper - English, French - AFNOR
    Learn More
    €130.82

  • JIS B 4226:1999 (R2014)

    Milling cutters - Form milling cutters with constant profile
    5/20/1999 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4230:1999 (R2014)

    Milling cutters - Woodruff keyseat cutters
    5/20/1999 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN 1835-1:1999-01

    Parallel shanks for milling cutters - Part 1: Dimensions
    1/1/1999 - - - DIN
    Learn More
    From: €47.60

  • JIS B 4116:1998 (R2014)

    Solid hardmetal end mills with parallel shank - Dimensions
    10/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4107:1998 (R2005)

    Side milling cutters with brazed hardmetal tips
    10/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4114:1998 (R2014)

    End mills with brazed helical hardmetal tips - Part 1: Dimensions of end mills with parallel shank
    10/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4201:1998 (R2014)

    Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels
    8/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4204:1998 (R2005)

    Milling cutters - Cylindrical milling cutters
    8/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4211:1998 (R2005)

    End mills with parallel peripheral cutting edges
    8/20/1998 - PDF - Japanese - JSA
    Learn More
    €46.02

  • JIS B 4214:1998 (R2005)

    Milling cutters - Shell end mills with plain bore and tenon drive
    8/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4217:1998 (R2005)

    Milling cutters - T-slot cutters
    8/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4221:1998 (R2005)

    Milling cutters - Angle milling cutters
    8/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4236:1998 (R2005)

    Milling cutters - Counterbores for hexagon socket head bolts
    8/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4005:1998 (R2014)

    Milling cutters cylindrical shanks - Dimensional characteristics
    8/20/1998 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 4216:1998 (R2014)

    Cutter arbors - Dimensions
    7/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • BS ISO 3338-1:1996

    Cylindrical shanks for milling cutters Dimensional characteristics of plain cylindrical
    2/15/1998 - PDF - English - BSI
    Learn More
    €130.35

  • JIS B 4210:1997 (R2003)

    Tapered end mills
    11/20/1997 - PDF - Japanese - JSA
    Learn More
    €41.86

  • JIS B 4232:1996 (R2007)

    Involute gear milling cutters
    12/20/1996 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4213:1996 (R2007)

    Tapered end mills for trapeziform runner with parallel shanks
    12/20/1996 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF E66-234 (12/1996)

    Woodruff keyseat cutters. Dimensions.
    12/1/1996 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF ISO 3855, E66-199 (12/1996)

    Milling cutters. Nomenclature.
    12/1/1996 - Paper - English, French - AFNOR
    Learn More
    €73.30

  • ISO 3338-3:1996

    Cylindrical shanks for milling cutters — Part 3: Dimensional characteristics of threaded shanks
    12/1/1996 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 3338-3:1996

    Cylindrical shanks for milling cutters — Part 3: Dimensional characteristics of threaded shanks
    12/1/1996 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 3338-1:1996

    Cylindrical shanks for milling cutters — Part 1: Dimensional characteristics of plain cylindrical shanks
    12/1/1996 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 3338-1:1996

    Cylindrical shanks for milling cutters — Part 1: Dimensional characteristics of plain cylindrical shanks
    12/1/1996 - Paper - French - ISO
    Learn More
    €40.00

Items 1 to 200 of 297 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2