Call 01 40 02 03 05

Currency:
EUR
 
 
English
 
All
 

25.080 : Machine tools

87 Item(s)

Set Ascending Direction
per page

List  Grid 

  • PR NF EN 12348, E65-404PR (02/2024)

    PR NF EN 12348, E65-404PR (02/2024)

    Foreuses à béton (carotteuses) sur colonne - Sécurité
    2/1/2024 - Paper - English, French - AFNOR
    Learn More
    €107.50

  • PR NF EN 15027, E65-406PR (02/2024)

    PR NF EN 15027, E65-406PR (02/2024)

    Scies murales et scies à fil transportables de chantier - Sécurité
    2/1/2024 - Paper - English, French - AFNOR
    Learn More
    €125.00

  • NF ISO 6779, E60-142 (11/2023)

    NF ISO 6779, E60-142 (11/2023)

    Conditions d'essai des machines verticales à brocher les intérieurs - Contrôle de l'exactitude
    11/1/2023 - Paper - French - AFNOR
    Learn More
    €75.67

  • PR NF EN ISO 23125-1, E60-406-1PR (09/2023)

    PR NF EN ISO 23125-1, E60-406-1PR (09/2023)

    Sécurité des machines outils - Machines de tournage - Partie 1 : Exigences de sécurité
    9/1/2023 - Paper - English, French - AFNOR
    Learn More
    €188.50

  • PR NF ISO 8636-2, E60-164PR (06/2023)

    PR NF ISO 8636-2, E60-164PR (06/2023)

    Machines-outils - Conditions d'essai des machines à fraiser à portique - Partie 2 : Contrôle de l'exactitude des machines à portique mobile
    6/1/2023 - Paper - English, French - AFNOR
    Learn More
    €125.00

  • PR NF ISO 2407, E60-123PR (06/2023)

    PR NF ISO 2407, E60-123PR (06/2023)

    Conditions d'essai des machines à rectifier les surfaces de révolution intérieures à broche horizontale - Contrôle de l'exactitude
    6/1/2023 - Paper - English, French - AFNOR
    Learn More
    €107.50

  • NF EN ISO 16090-1, E60-421-1 (12/2022)

    NF EN ISO 16090-1, E60-421-1 (12/2022)

    Machine tools safety - Machining centres, milling machines, transfer machines - Part 1 : safety requirements
    12/1/2022 - Paper - French - AFNOR
    Learn More
    €206.00

  • NF ISO 230-12, E60-100-12 (08/2022)

    NF ISO 230-12, E60-100-12 (08/2022)

    Code d'essai des machines-outils - Partie 12: Exactitude des pièces d'essai finies
    8/1/2022 - Paper - French - AFNOR
    Learn More
    €119.00

  • NF EN ISO 28881, E60-450 (07/2022)

    NF EN ISO 28881, E60-450 (07/2022)

    Machine tools - Safety - Electrical discharge machines
    7/1/2022 - Paper - French - AFNOR
    Learn More
    €144.67

  • PR NF ISO 2773, E60-132PR (07/2022)

    PR NF ISO 2773, E60-132PR (07/2022)

    Conditions d'essais des machines à percer verticales à colonne - Contrôle de la précision
    7/1/2022 - Paper - English, French - AFNOR
    Learn More
    €80.50

  • NF ISO 230-10, E60-100-10 (06/2022)

    NF ISO 230-10, E60-100-10 (06/2022)

    Test code for machine tools - Part 10 : Determination of the measuring performance of probing systems of numerically controlled machine tools
    6/1/2022 - Paper - French - AFNOR
    Learn More
    €154.67

  • NF ISO 26303, E60-180 (06/2022)

    NF ISO 26303, E60-180 (06/2022)

    Machine tools - Short-term capability evaluation of machining processes on metal-cutting machine tools
    6/1/2022 - Paper - French - AFNOR
    Learn More
    €119.00

  • NF ISO 19744, E60-139 (02/2022)

    NF ISO 19744, E60-139 (02/2022)

    Test conditions for numerically controlled broaching machines - Testing of accuracy - Vertical surface type broaching machines
    2/1/2022 - Paper - French - AFNOR
    Learn More
    €119.00

  • NF ISO 230-3, E60-100-3 (01/2021)

    NF ISO 230-3, E60-100-3 (01/2021)

    Test code for machine tools - Part 3 : determination of thermal effects - Code d'essai des machines-outils - Partie 3 : evaluation des effets thermiques
    1/1/2021 - Paper - French - AFNOR
    Learn More
    €130.67

  • PR NF EN ISO 16089/A1, E60-400/A1PR (12/2020)

    PR NF EN ISO 16089/A1, E60-400/A1PR (12/2020)

    Machine tools - Safety - Stationary grinding machines - Amendment 1
    12/1/2020 - Paper - English, French - AFNOR
    Learn More
    €79.38

  • PR NF ISO 230-5, E60-100-5PR (11/2020)

    PR NF ISO 230-5, E60-100-5PR (11/2020)

    Test code for machine tools - Part 5 : Determination of the noise emission
    11/1/2020 - Paper - English, French - AFNOR
    Learn More
    €107.50

  • NF EN 16564, E58-730 (11/2020)

    NF EN 16564, E58-730 (11/2020)

    Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
    11/1/2020 - Paper - French - AFNOR
    Learn More
    €130.67

  • NF EN 15571, E58-760 (11/2020)

    NF EN 15571, E58-760 (11/2020)

    Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines
    11/1/2020 - Paper - French - AFNOR
    Learn More
    €130.67

  • NF ISO 14955-3, E60-300-3 (09/2020)

    NF ISO 14955-3, E60-300-3 (09/2020)

    Machine tools - Environmental evaluation of machine tools - Part 3 : principles for testing metal-cutting machine tools with respect to energy efficiency
    9/1/2020 - Paper - French - AFNOR
    Learn More
    €99.33

  • FD E66-000 (09/2020)

    FD E66-000 (09/2020)

    Tools - French standardization in the field of tools - Overall survey
    9/1/2020 - Paper - French - AFNOR
    Learn More
    €144.50

  • NF ISO 14955-5, E60-300-5 (08/2020)

    NF ISO 14955-5, E60-300-5 (08/2020)

    Machine tools - Environmental evaluation of machine tools - Part 5 : principles for testing woodworking machine tools with respect to energy supplied - Machines-outils - Evaluation environnementale des machines-outils - Partie 5 : Principes d'essai des machines-outils pour le travail du bois à l'égard de l'efficacité énergétique
    8/1/2020 - Paper - French - AFNOR
    Learn More
    €99.33

  • NF ISO 17543-1, E60-173-1 (08/2020)

    NF ISO 17543-1, E60-173-1 (08/2020)

    Machine tools - Test conditions for universal spindle heads - Part 1 : accessory heads for machines with horizontal spindle (horizontal Z-axis)
    8/1/2020 - Paper - French - AFNOR
    Learn More
    €119.00

  • FD ISO/TR 17243-3, E60-128-3 (07/2020)

    FD ISO/TR 17243-3, E60-128-3 (07/2020)

    Machine tool spindles - Evaluation of machine tool spindle vibrations by measurements on spindle housing - Part 3 : gear-driven spindles with rolling bearings operating at speeds between 600 r/min and 12 000 r/min
    7/1/2020 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF ISO 3875, E60-125 (06/2020)

    NF ISO 3875, E60-125 (06/2020)

    Machine tools - Test conditions for external cylindrical centreless grinding machines - Testing of the accuracy
    6/1/2020 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF T35-027 (01/2020)

    NF T35-027 (01/2020)

    Grinding booths - Safety requirement
    1/1/2020 - Paper - French - AFNOR
    Learn More
    €108.33

  • NF ISO 14955-4, E60-300-4 (11/2019)

    NF ISO 14955-4, E60-300-4 (11/2019)

    Machine tools - Environmental evaluation of machine tools - Part 4 : principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency
    11/1/2019 - Paper - French - AFNOR
    Learn More
    €185.67

  • NF ISO 2772, E60-133 (09/2019)

    NF ISO 2772, E60-133 (09/2019)

    Test conditions for box type vertical drilling machines - Testing of the accuracy - Condition d'essai des perceuses verticales a montant (perceuses-aléseuse) - Contrôle de l'exactitude
    9/1/2019 - Paper - French - AFNOR
    Learn More
    €60.67

  • NF ISO 6480, E60-141 (09/2019)

    NF ISO 6480, E60-141 (09/2019)

    Test conditions for horizontal internal type broaching machines - Testing of accuracy
    9/1/2019 - Paper - French - AFNOR
    Learn More
    €75.50

  • NF ISO 6481, E60-143 (09/2019)

    NF ISO 6481, E60-143 (09/2019)

    Test conditions for vertical surface type broaching machines - Testing of accuracy
    9/1/2019 - Paper - French - AFNOR
    Learn More
    €75.50

  • FD ISO/TR 230-11, E60-100-11 (06/2019)

    FD ISO/TR 230-11, E60-100-11 (06/2019)

    Test code for machine tools - Part 11 : measuring instruments suitable for machine tool geometry tests
    6/1/2019 - Paper - French - AFNOR
    Learn More
    €192.00

  • FD ISO/TR 17243-1, E60-128-1 (05/2019)

    FD ISO/TR 17243-1, E60-128-1 (05/2019)

    Machine tool spindles - Evaluation of machine tool spindle vibrations by measurements on spindle housing - Part 1 : spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1
    5/1/2019 - Paper - French - AFNOR
    Learn More
    €75.50

  • FD ISO/TR 17243-2, E60-128-2 (05/2019)

    FD ISO/TR 17243-2, E60-128-2 (05/2019)

    Machine tool spindles - Evaluation of spindle vibrations by measurements on non-rotating parts - Part 2 : direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min
    5/1/2019 - Paper - French - AFNOR
    Learn More
    €75.50

  • NF ISO 14955-1, E60-300-1 (02/2018)

    NF ISO 14955-1, E60-300-1 (02/2018)

    Machine tools - Environmental evaluation of machine tools - Part 1 : design methodology for energy-efficient machine tools
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €104.67

  • NF EN ISO 16093, E60-460 (10/2017)

    NF EN ISO 16093, E60-460 (10/2017)

    Machine tools - Safety - Sawing machines for cold metal
    10/1/2017 - Paper - French - AFNOR
    Learn More
    €126.36

  • NF EN 61029-2-5/A11, C75-200-2-5/A11 (10/2017)

    NF EN 61029-2-5/A11, C75-200-2-5/A11 (10/2017)

    Safety of transportable motor-operated electric tools - Part 2-5 : particular requirements for band saws
    10/1/2017 - Paper - French - AFNOR
    Learn More
    €54.67

  • NF E60-127 (09/2017)

    NF E60-127 (09/2017)

    Machine tools - Vertical grinding machines - Acceptance conditions - Testing of accuracy
    9/1/2017 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF EN 61029-2-11, C75-200-2-11 (07/2017)

    NF EN 61029-2-11, C75-200-2-11 (07/2017)

    Safety of transportable motor-operated electric tools - Part 2-11 : particular requirements for combined mitre and bench saws
    7/1/2017 - Paper - French - AFNOR
    Learn More
    €141.00

  • NF ISO 3070-2, E60-116-2 (11/2016)

    NF ISO 3070-2, E60-116-2 (11/2016)

    Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 2 : machines with movable column along the X-axis (floor type)
    11/1/2016 - Paper - French - AFNOR
    Learn More
    €118.00

  • NF ISO 2407/A1, E60-123/A1 (09/2016)

    NF ISO 2407/A1, E60-123/A1 (09/2016)

    Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy - Amendment 1
    9/1/2016 - Paper - French - AFNOR
    Learn More
    €25.50

  • NF ISO 447, E60-031 (06/2016)

    NF ISO 447, E60-031 (06/2016)

    Machies tools - Direction of operation of controls
    6/1/2016 - Paper - French - AFNOR
    Learn More
    €25.50

  • NF ISO 230-2/A1, E60-100-2/A1 (05/2016)

    NF ISO 230-2/A1, E60-100-2/A1 (05/2016)

    Test code for machine tools - Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes - Amendment 1
    5/1/2016 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF ISO 230-7, E60-100-7 (09/2015)

    NF ISO 230-7, E60-100-7 (09/2015)

    Test code for machine tools - Part 7 : geometric accuracy of axes of rotation - Machines-outils - Code d'essai des machines-outils - Partie 7 : exactitude géométrique des axes de rotation
    9/1/2015 - Paper - French - AFNOR
    Learn More
    €154.67

  • NF ISO 13041-5, E60-160-5 (09/2015)

    NF ISO 13041-5, E60-160-5 (09/2015)

    Test conditions for numerically controlled turning machines and turning centres - Part 5 : accuracy of speeds and interpolations
    9/1/2015 - Paper - French - AFNOR
    Learn More
    €108.00

  • NF EN ISO 23125, E60-416 (05/2015)

    NF EN ISO 23125, E60-416 (05/2015)

    Machine tools - Safety - Turning machines
    5/1/2015 - Paper - French - AFNOR
    Learn More
    €154.67

  • NF ISO 1986-1, E60-121 (08/2014)

    NF ISO 1986-1, E60-121 (08/2014)

    Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1 : machines with a table length of up to 1 600 mm - Conditions d'essai des machines à rectifier les surfaces planes, à broche porte-meules à axe horizontal - Contrôle de l'extraction - Partie 1 : machines avec une table jusqu'à 1 600 mm de long
    8/1/2014 - Paper - French - AFNOR
    Learn More
    €75.50

  • NF ISO 230-2, E60-100-2 (06/2014)

    NF ISO 230-2, E60-100-2 (06/2014)

    Test code for machine tools - Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes
    6/1/2014 - Paper - French - AFNOR
    Learn More
    €130.50

  • NF EN 61029-2-11/A11, C75-200-2-11/A11 (09/2013)

    NF EN 61029-2-11/A11, C75-200-2-11/A11 (09/2013)

    Safety of transportable motor-operated electric tools - Part 2-11 : particular requirements for combined mitre and bench saws
    9/1/2013 - Paper - French - AFNOR
    Learn More
    €54.67

  • NF EN ISO 11148-12, E65-100-12 (03/2013)

    NF EN ISO 11148-12, E65-100-12 (03/2013)

    Hand-held non-electric power tools - Safety requirements - Part 12 : circular, oscillating and reciprocating saws - Machines portatives à moteur non électrique
    3/1/2013 - Paper - French - AFNOR
    Learn More
    €99.33

  • NF EN ISO 11148-6, E65-100-6 (03/2013)

    NF EN ISO 11148-6, E65-100-6 (03/2013)

    Hand-held non-electric power tools - Safety requirements - Part 6 : assembly power tools for threaded fasteners - Machines portatives à moteur non électrique
    3/1/2013 - Paper - French - AFNOR
    Learn More
    €96.12

  • NF EN ISO 11148-4, E65-100-4 (03/2013)

    NF EN ISO 11148-4, E65-100-4 (03/2013)

    Hand-held non-electric power tools - Safety requirements - Part 4 : non-rotary percussive power tools - Machines portatives à moteur non électrique
    3/1/2013 - Paper - French - AFNOR
    Learn More
    €96.12

  • NF EN ISO 11148-7, E65-100-7 (10/2012)

    NF EN ISO 11148-7, E65-100-7 (10/2012)

    Hand-held non-electric power tools - Safety requirements - Part 7 : grinders - Machines portatives à moteur non électrique
    10/1/2012 - Paper - French - AFNOR
    Learn More
    €126.33

  • NF ISO 230-1, E60-100-1 (05/2012)

    NF ISO 230-1, E60-100-1 (05/2012)

    Test code for machine tools - Part 1 : geometric accuracy of machines operating under no-load or quasi-static conditions
    5/1/2012 - Paper - French - AFNOR
    Learn More
    €206.00

  • NF EN ISO 11148-5, E65-100-5 (02/2012)

    NF EN ISO 11148-5, E65-100-5 (02/2012)

    Hand-held non-electric power tools - Safety requirements - Part 5 : rotary percussive drills - Machines portatives à moteur non électrique
    2/1/2012 - Paper - French - AFNOR
    Learn More
    €83.85

  • NF EN ISO 11148-8, E65-100-8 (02/2012)

    NF EN ISO 11148-8, E65-100-8 (02/2012)

    Hand-held non-electric power tools - Safety requirements - Part 8 : sanders and polishers - Machines portatives à moteur non électrique
    2/1/2012 - Paper - French - AFNOR
    Learn More
    €83.67

  • NF EN ISO 11148-9, E65-100-9 (02/2012)

    NF EN ISO 11148-9, E65-100-9 (02/2012)

    Hand-held non-electric power tools - Safety requirements - Part 9 : die grinders - Machines portatives à moteur non électrique
    2/1/2012 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF EN 61029-2-5, C75-200-2-5 (02/2012)

    NF EN 61029-2-5, C75-200-2-5 (02/2012)

    Safety of transportable motor-operated electric tools - Part 2-5 : particular requirements for band saws
    2/1/2012 - Paper - French - AFNOR
    Learn More
    €103.33

  • NF EN ISO 11148-10, E65-100-10 (02/2012)

    NF EN ISO 11148-10, E65-100-10 (02/2012)

    Hand-held non-electric power tools - Safety requirements - Part 10 : compression power tools - Machines portatives à moteur non électrique
    2/1/2012 - Paper - French - AFNOR
    Learn More
    €86.50

  • NF EN ISO 11148-11, E65-100-11 (02/2012)

    NF EN ISO 11148-11, E65-100-11 (02/2012)

    Hand-held non-electric power tools - Safety requirements - Part 11 : nibblers and shears - Machines portatives à moteur non électrique
    2/1/2012 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF EN 61029-2-3, C75-200-2-3 (10/2011)

    NF EN 61029-2-3, C75-200-2-3 (10/2011)

    Safety of transportable motor-operated electric tools - Part 2-3 : particular requirements for planers and thicknessers
    10/1/2011 - Paper - French - AFNOR
    Learn More
    €127.50

  • PR NF EN 61029-2-8, C75-200-2-8PR (07/2011)

    PR NF EN 61029-2-8, C75-200-2-8PR (07/2011)

    Safety of transportable motor-operated electric tools - Part 2-8 : particular requirements for single spindle vertical moulders
    7/1/2011 - Paper - French - AFNOR
    Learn More
    €71.50

  • NF EN 61029-1/A11, C75-200/A11 (02/2011)

    NF EN 61029-1/A11, C75-200/A11 (02/2011)

    Safety of transportable motor-operated electric tools - Part 1 : general requirements
    2/1/2011 - Paper - French - AFNOR
    Learn More
    €54.67

  • FD ISO/TR 230-8, E60-100-8 (10/2010)

    FD ISO/TR 230-8, E60-100-8 (10/2010)

    Test code for machine tools - Part 8 : vibration - Code d'essai des machines-outils
    10/1/2010 - Paper - French - AFNOR
    Learn More
    €185.67

  • NF EN 61029-2-8, C75-208 (06/2010)

    NF EN 61029-2-8, C75-208 (06/2010)

    Safety of transportable motor-operated electric tools - Part 2-8 : particular requirements for single spindle vertical moulders
    6/1/2010 - Paper - French - AFNOR
    Learn More
    €141.33

  • NF EN 61029-1, C75-200 (11/2009)

    NF EN 61029-1, C75-200 (11/2009)

    Safety of transportable motor-operated electric tools - Part 1 : general requirements
    11/1/2009 - Paper - French - AFNOR
    Learn More
    €197.00

  • NF EN 12348+A1, E65-404 (05/2009)

    NF EN 12348+A1, E65-404 (05/2009)

    Core drilling machines on stand - Safety - Foreuses à béton (carotteuses) sur colonne
    5/1/2009 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF EN 15027+A1, E65-406 (05/2009)

    NF EN 15027+A1, E65-406 (05/2009)

    Transportable wall saw and wire equipment for job site - Safety - Scies murales et scies à fil transportables de chantier
    5/1/2009 - Paper - French - AFNOR
    Learn More
    €104.67

  • NF EN 12717/IN1, E60-406/IN1 (04/2009)

    NF EN 12717/IN1, E60-406/IN1 (04/2009)

    Safety of machine tools - Drilling machines - Sécurité des machines-outils
    4/1/2009 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF EN 12717+A1, E60-406 (04/2009)

    NF EN 12717+A1, E60-406 (04/2009)

    Safety of machine tools - Drilling machines - Sécurité des machines-outils
    4/1/2009 - Paper - French - AFNOR
    Learn More
    €108.33

  • NF EN 792-13/IN1, E65-100-13/IN1 (12/2008)

    NF EN 792-13/IN1, E65-100-13/IN1 (12/2008)

    Hand-held non-electric power tools - Safety requirements - Part 13 : fastener driving tools - Machines portatives à moteur non électrique
    12/1/2008 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF ISO 8636-2, E60-164 (08/2008)

    NF ISO 8636-2, E60-164 (08/2008)

    Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 2 : travelling bridge (gantry-type) machines - Machines-outils
    8/1/2008 - Paper - French - AFNOR
    Learn More
    €108.00

  • NF ISO 3070-1, E60-116-1 (03/2008)

    NF ISO 3070-1, E60-116-1 (03/2008)

    Machines tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 1 : machines with fixed column and movable table - Machines-outils
    3/1/2008 - Paper - French - AFNOR
    Learn More
    €119.00

  • NF ISO 3070-3, E60-116-3 (03/2008)

    NF ISO 3070-3, E60-116-3 (03/2008)

    Machines-tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 3 : Machines with movable column and movable table - Machines-outils
    3/1/2008 - Paper - French - AFNOR
    Learn More
    €130.67

  • NF ISO 1701-1, E60-111-1 (12/2005)

    NF ISO 1701-1, E60-111-1 (12/2005)

    Test conditions for milling machines with table of variable height - Testing of the accuracy - Part 1 : machines with horizontal spindle - Conditions d'essai des machines à fraiser à table de hauteur variable
    12/1/2005 - Paper - French - AFNOR
    Learn More
    €99.00

  • NF ISO 1701-2, E60-111-2 (12/2005)

    NF ISO 1701-2, E60-111-2 (12/2005)

    Test conditions for milling machines with table of variable height - Testing of accuracy - Part 2 : machines with vertical spindle - Conditions d'essai des machines à fraiser à table de hauteur variable
    12/1/2005 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF EN 61029-1/A11, C75-200/A11 (11/2005)

    NF EN 61029-1/A11, C75-200/A11 (11/2005)

    Safety of transportable motor-operated electric tools - Part 1 : general requirements
    11/1/2005 - Paper - French - AFNOR
    Learn More
    €54.67

  • NF EN 61029-1/A12, C75-200/A12 (11/2005)

    NF EN 61029-1/A12, C75-200/A12 (11/2005)

    Safety of transportable motor-operated electric tools - Part 1 : general requirements
    11/1/2005 - Paper - French - AFNOR
    Learn More
    €54.67

  • NF EN 61029-1, C75-200 (10/2005)

    NF EN 61029-1, C75-200 (10/2005)

    Safety of transportable motor-operated electric tools - Part 1 : general requirements
    10/1/2005 - Paper - French - AFNOR
    Learn More
    €197.00

  • FD ISO/TR 230-9, E60-100-9 (08/2005)

    FD ISO/TR 230-9, E60-100-9 (08/2005)

    Test code for machine tools - Part 9 : estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
    8/1/2005 - Paper - French - AFNOR
    Learn More
    €86.50

  • NF ISO 230-6, E60-145 (10/2003)

    NF ISO 230-6, E60-145 (10/2003)

    Test code for machines tools - Part 6 : determination of positioning accuracy on body and face diagonals (Digital displacement tests)
    10/1/2003 - Paper - French - AFNOR
    Learn More
    €86.50

  • NF ISO 230-5, S31-069 (01/2003)

    NF ISO 230-5, S31-069 (01/2003)

    Test code for machine tools - Part 5 : determination of the noise emission
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €119.00

  • NF ISO 1984-1, E60-112-1 (08/2001)

    NF ISO 1984-1, E60-112-1 (08/2001)

    Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - - Part 1 : machines with horizontal spindle - Conditions d'essai des machines à fraiser à table de hauteur fixe à commande manuelle
    8/1/2001 - Paper - French - AFNOR
    Learn More
    €99.33

  • NF ISO 1984-2, E60-112-2 (08/2001)

    NF ISO 1984-2, E60-112-2 (08/2001)

    Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Part 2 : machines with vertical spindle - Conditions d'essai des machines à fraiser à table de hauteur fixe à commande manuelle
    8/1/2001 - Paper - French - AFNOR
    Learn More
    €99.33

  • NF ISO 8636-1, E60-163 (06/2000)

    NF ISO 8636-1, E60-163 (06/2000)

    Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 1 : fixed bridge (portal-type) machines - Machines-outils
    6/1/2000 - Paper - French - AFNOR
    Learn More
    €119.00

  • NF ISO 2433, E60-124 (03/2000)

    NF ISO 2433, E60-124 (03/2000)

    Machines tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy - Machines-outils
    3/1/2000 - Paper - French - AFNOR
    Learn More
    €108.00

  • NF ISO 2407, E60-123 (01/2000)

    NF ISO 2407, E60-123 (01/2000)

    Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy
    1/1/2000 - Paper - French - AFNOR
    Learn More
    €99.33

  • NF ISO 298, E62-105 (05/1997)

    NF ISO 298, E62-105 (05/1997)

    Machine tools. Lathe centres. Sizes for interchangeability. - Machines-outils
    5/1/1997 - Paper - French - AFNOR
    Learn More
    €60.50

  • NF ISO 6545, E60-138 (08/1993)

    NF ISO 6545, E60-138 (08/1993)

    Acceptance conditions for gear hobbing machines. Testing of the accuracy. - Conditions de réception des machines à tailler les engrenages par fraise-mère
    8/1/1993 - Paper - French - AFNOR
    Learn More
    €108.00

87 Item(s)

Set Ascending Direction
per page

List  Grid 

25.080 : Machine tools
Shop By

Currently Shopping by:

  1. Published by: AFNOR Remove This Item
Clear All

Shopping Options

Document type
  1. Amendment draft (1)
  2. Draft standard (8)
  3. National directive (2)
  4. Norms amendments (7)
  5. Standard (69)

NORMADOC - Your purchasing center for standards regulations & technical and legal books

Useful information
Customer service
logo Normadoc certifié ISO 9001

© 2023 Normadoc . Tous droits réservés - All Rights Reserved.

To top
Cookie Preferences
Your Privacy

When you visit any website, it may store or retrieve information on your browser, usually in the form of cookies. This information does not usually identify you, but it does help companies to learn how their users are interacting with the site.

We respect your right to privacy, so you can choose not to accept some of these cookies. Choose from the different category headers to find out more and change your default settings.

Strictly Necessary Cookies
These cookies are essential for the website to function and they cannot be turned off. They are usually only set in response to actions made by you on our site, such as logging in, adding items to your cart or filling in forms. If you browse our website, you accept these cookies.
Cookies are used by
  • Magento Store