25.080.40 : Drilling machines

65 Item(s)

Set Ascending Direction
per page

List  Grid 

  • NF ISO 2772, E60-133 (09/2019)

    Test conditions for box type vertical drilling machines - Testing of the accuracy - Condition d'essai des perceuses verticales a montant (perceuses-aléseuse) - Contrôle de l'exactitude
    9/1/2019 - Paper - French - AFNOR
    Learn More
    €51.24

  • BS ISO 2772:2019

    Test conditions for box type vertical drilling machines. Testing of the accuracy
    3/28/2019 - PDF - English - BSI
    Learn More
    €154.05

  • ISO 2772:2019

    Test conditions for box type vertical drilling machines — Testing of the accuracy
    3/1/2019 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 2772:2019

    Test conditions for box type vertical drilling machines — Testing of the accuracy
    3/1/2019 - Paper - French - ISO
    Learn More
    €61.00

  • BS EN 12348:2000+A1:2009

    Core drilling machines on stand. Safety
    10/31/2015 - PDF - English - BSI
    Learn More
    €253.59

  • VDI 3211:2015-01

    Deep hole drilling on machining centers
    1/1/2015 - PDF - English, German - VDI
    Learn More
    €103.22

  • VDI 3209 Blatt 2:2014-10

    Deep hole boring - Approximate values for skiving and roller burnishing of bores
    10/1/2014 - PDF - German - VDI
    Learn More
    €51.35

  • VDI 3212:2014-07

    Acceptance test requirements of deep hole drilling machines with one or more spindles
    7/1/2014 - PDF - English, German - VDI
    Learn More
    €71.24

  • VDI 3208:2014-04

    Deep hole boring with gun drills
    4/1/2014 - PDF - English, German - VDI
    Learn More
    €94.38

  • NF EN ISO 11148-3, E65-100-3 (03/2013)

    Hand-held non-electric power tools - Safety requirements - Part 3 : drills and tappers - Machines portatives à moteur non électrique
    3/1/2013 - Paper - French - AFNOR
    Learn More
    €73.30

  • SAE J 2583:2013-02-13

    Directional Drilling Planning and Mapping Nomenclature
    2/13/2013 - PDF - English - SAE
    Learn More
    €77.00

  • SAE J 2520:2013-01-02

    Classification, Nomenclature, and Specification Definitions for Directional Drilling Tracking Equipment
    1/2/2013 - PDF - English - SAE
    Learn More
    €77.00

  • NF EN ISO 11148-5, E65-100-5 (02/2012)

    Hand-held non-electric power tools - Safety requirements - Part 5 : rotary percussive drills - Machines portatives à moteur non électrique
    2/1/2012 - Paper - French - AFNOR
    Learn More
    €73.30

  • DIN EN 12348:2010-01

    Core drilling machines on stand - Safety; German version EN 12348:2000+A1:2009
    1/1/2010 - - - DIN
    Learn More
    From: €103.00

  • BS EN 12717:2001+A1:2009

    Safety of machine tools. Drilling machines
    10/31/2009 - PDF - English - BSI
    Learn More
    €284.40

  • UNE-EN 12348:2001+A1:2009 (R2018)

    Core drilling machines on stand - Safety
    9/23/2009 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • DIN EN 12717:2009-07

    Safety of machine tools - Drilling machines; German version EN 12717:2001+A1:2009
    7/1/2009 - - - DIN
    Learn More
    From: €125.30

  • NBN EN 12348+A1:2009

    Core drilling machines on stand - Safety
    6/15/2009 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 12348+A1:2009

    Core drilling machines on stand - Safety
    6/15/2009 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 12348+A1:2009

    Core drilling machines on stand - Safety
    6/15/2009 - PDF - French - NBN
    Learn More
    €77.00

  • NF EN 12348/IN1, E65-404/IN1 (05/2009)

    Core drilling machines on stand - Safety - Foreuses à béton (carotteuses) sur colonne
    5/1/2009 - Paper - French - AFNOR
    Learn More
    €21.90

  • NF EN 12348+A1, E65-404 (05/2009)

    Core drilling machines on stand - Safety - Foreuses à béton (carotteuses) sur colonne
    5/1/2009 - Paper - French - AFNOR
    Learn More
    €73.30

  • UNE-EN 12717:2002+A1:2009 (R2010)

    Safety of machine tools - Drilling machines
    4/15/2009 - PDF - Spanish - AENOR
    Learn More
    €65.00

  • UNE-EN 12717:2002+A1:2009 (R2010)

    Safety of machine tools - Drilling machines
    4/15/2009 - PDF - English - AENOR
    Learn More
    €78.00

  • NBN EN 12717+A1:2009

    Safety of machine tools - Drilling machines
    4/2/2009 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 12717+A1:2009

    Safety of machine tools - Drilling machines
    4/2/2009 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 12717+A1:2009

    Safety of machine tools - Drilling machines
    4/2/2009 - PDF - French - NBN
    Learn More
    €77.00

  • NF EN 12717/IN1, E60-406/IN1 (04/2009)

    Safety of machine tools - Drilling machines - Sécurité des machines-outils
    4/1/2009 - Paper - French - AFNOR
    Learn More
    €21.90

  • NF EN 12717+A1, E60-406 (04/2009)

    Safety of machine tools - Drilling machines - Sécurité des machines-outils
    4/1/2009 - Paper - French - AFNOR
    Learn More
    €91.50

  • VDI 3210 Blatt 1:2006-03 (R2013)

    Deep-hole boring
    3/1/2006 - PDF - English, German - VDI
    Learn More
    €139.88

  • ANSI B 11.8 -2001 (R2012)

    Safety Requirements for Manual Milling, Drilling, & Boring Machines with or without Automatic Control
    3/3/2001 - PDF - English - ANSI
    Learn More
    €75.00

  • NF ISO 3686-1, E60-136-1 (11/2000)

    Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Part 1 : single column type machines - Conditions d'essai des machines à percer et à aléser verticales monobroches à coordonnées de haute précision avec table de hauteur fixe
    11/1/2000 - Paper - French - AFNOR
    Learn More
    €84.02

  • NF ISO 3686-2, E60-136-2 (11/2000)

    Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Part 2 : portal type machines with moving table - Conditions d'essai des machines à percer et à aléser verticales monobroches à coordonnées de haute précision avec table de hauteur fixe
    11/1/2000 - Paper - French - AFNOR
    Learn More
    €84.02

  • BS ISO 3686-2:2000

    Test conditions for high accuracy turret and single spindle coordinate drilling boring machines with table of fixed height vertical spindle. Testing the Portal type moving
    9/15/2000 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 3686-1:2000

    Test conditions for high accuracy turret and single spindle coordinate drilling boring machines with table of fixed height vertical spindle. Testing the Single column type
    9/15/2000 - PDF - English - BSI
    Learn More
    €215.67

  • VDI 3209 Blatt 1:1999-11 (R2013)

    Deep hole boring with external supply of coolant
    11/1/1999 - PDF - English, German - VDI
    Learn More
    €94.38

  • JIS B 6209-1:1998 (R2013)

    Box type upright drilling machines - Testing of the accuracy
    10/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 6209-2:1998 (R2013)

    Pillar type upright drilling machines - Testing of the accuracy
    10/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 6208:1998 (R2013)

    Radial drilling machines - Testing of the accuracy
    10/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4634:1998 (R2014)

    Drill chuck
    7/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 5201:1998 (R2013)

    Jig bushes and accessories
    1/20/1998 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF ISO 2773-1, E60-132-1 (04/1997)

    Test conditions for pillar type vertical drilling machines. Testing of the accuracy. Part 1 : geometrical tests. - Conditions d'essais des machines à percer verticales à colonne
    4/1/1997 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF ISO 2773-2, E60-132-2 (04/1997)

    Test conditions for pillar type vertical drilling machines. Testing of the accuracy. Part 2 : practical test. - Conditions d'essais des machines à percer verticales à colonne
    4/1/1997 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF ISO 2423, E60-131 (04/1996)

    Acceptance conditions for radial drilling machines with arm adjustable in height. Testing of accuracy. - Conditions de réception des machines à percer radiales à bras mobile en hauteur
    4/1/1996 - Paper - French - AFNOR
    Learn More
    €64.01

  • NF ISO 3190, E60-135 (04/1996)

    Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle. Testing of the accuracy. - Conditions d'essai des machines à percer verticales à coordonnées, du type monobroche ou à tourelle revolver
    4/1/1996 - Paper - French - AFNOR
    Learn More
    €73.30

  • VDI 3209 Blatt 2:1992-09

    Deep hole boring; approximate values for the skiving and roller burnishing of bores
    9/1/1992 - PDF - German - VDI
    Learn More
    €51.35

  • UNE 15310:1990

    RADIAL DRILLING MACHINES WITH ADJUSTABLE ARM IN HEIGHT. ACCURACY CONTROL.
    4/19/1990 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE 15311:1990

    PILLAR TYPE VERTICAL DRILLING MACHINES. ACCURACY CONTROL.
    4/19/1990 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE 15312:1990

    TURRET AND SINGLE SPINDLE CO-ORDINATE DRILLING MACHINES WITH VERTICAL SPINDLE. ACCURACY CONTROL.
    4/19/1990 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • BS 1660-10:1988

    Machine tapers Specification for drill chuck (Jacob and short Morse)
    9/30/1988 - PDF - English - BSI
    Learn More
    €130.35

  • JIS B 6332:1986 (R2017)

    Test code for performance and accuracy of numerically controlled turret and single spindle drilling machines with vertical spindle
    11/1/1986 - PDF - Japanese - JSA
    Learn More
    €25.00

  • VDI 3210 Blatt 2:1986-10

    Deep-boring equipment; form for enquiry, quoting and ordering
    10/1/1986 - PDF - German - VDI
    Learn More
    €51.35

  • JIS B 6332:1986

    Test code for performance and accuracy of numerically controlled turret and single spindle drilling machines with vertical spindle
    1/1/1986 - PDF - English - JSA
    Learn More
    €63.58

  • DIN 45635-1606:1984-03

    Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines, drilling machines
    3/1/1984 - PDF - German - DIN
    Learn More
    €33.60

  • VDI 3742 Blatt 6:1983-06

    Characteristic noise emission values of technical sound sources; cutting machine tools; circular drilling machines
    6/1/1983 - PDF - German - VDI
    Learn More
    €27.95

  • ISO 2423:1982

    Acceptance conditions for radial drilling machines with the arm adjustable in height — Testing of accuracy
    2/1/1982 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 2423:1982

    Acceptance conditions for radial drilling machines with the arm adjustable in height — Testing of accuracy
    2/1/1982 - Paper - French - ISO
    Learn More
    €61.00

  • VDI/DGQ 3444:1978-09 (R2014)

    Statistical control of exactly working and positioning of coordinate drilling machines and machining centers
    9/1/1978 - PDF - German - VDI
    Learn More
    €94.38

  • BS 4656-15:1976

    Accuracy of machine tools and methods test Drilling machines, turret single spindle co-ordinate types
    4/30/1976 - PDF - English - BSI
    Learn More
    €154.05

  • ISO 3190:1975

    Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle — Testing of the accuracy
    5/1/1975 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 3190:1975

    Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle — Testing of the accuracy
    5/1/1975 - Paper - French - ISO
    Learn More
    €61.00

  • BS 4656-10:1975

    Specification for the accuracy of machine tools and methods test Drilling machines, radial type
    3/27/1975 - PDF - English - BSI
    Learn More
    €130.35

  • BS 4656-11:1974

    Accuracy of machine tools and methods test Drilling machines, vertical floor mounted column pillar types
    6/28/1974 - PDF - English - BSI
    Learn More
    €130.35

  • ISO 2773-2:1973

    Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 2: Practical test
    12/1/1973 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2773-1:1973

    Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 1: Geometrical tests
    7/1/1973 - Paper - English - ISO
    Learn More
    €40.00

65 Item(s)

Set Ascending Direction
per page

List  Grid