25.080 : Machine tools
-
UNE 15330:2008
Underfloor wheel lathe for the reprofiling of railway wheels. Test conditions. Testing of the accuracy.
10/29/2008 - PDF - Spanish -
Learn More€74.00 -
IEC 60745-2-4:2002+AMD1:2008 Edition 2.1
IEC 60745-2-4:2002+AMD1:2008 (Consolidated version) Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
8/13/2008 - PDF - English, French -
Learn More€92.00 -
NF ISO 8636-2, E60-164 (08/2008)
Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 2 : travelling bridge (gantry-type) machines - Machines-outils
8/1/2008 - Paper - French -
Learn More€108.00 -
BS ISO 8525:2008
Airborne noise emitted by machine tools. Operating conditions for metal-cutting machines
7/31/2008 - PDF - English -
Learn More€293.00 -
IEC 60745-2-4:2002/AMD1:2008
IEC 60745-2-4:2002/AMD1:2008 Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
5/27/2008 - PDF - English, French -
Learn More€23.00 -
NF ISO 3070-3, E60-116-3 (03/2008)
Machines-tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 3 : Machines with movable column and movable table - Machines-outils
3/1/2008 - Paper - French -
Learn More€130.67 -
NF ISO 3070-1, E60-116-1 (03/2008)
Machines tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 1 : machines with fixed column and movable table - Machines-outils
3/1/2008 - Paper - French -
Learn More€119.00 -
BS ISO 8636-2:2007
Machine tools. Test conditions for bridge-type milling machines. Testing of the accuracy Travelling bridge (gantry-type) machines
2/29/2008 - PDF - English -
Learn More€331.00 -
BS ISO 3070-3:2007
Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Machines movable column table
1/31/2008 - PDF - English -
Learn More€348.00 -
BS ISO 3070-1:2007
Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Machines fixed column movable table
1/31/2008 - PDF - English -
Learn More€348.00 -
ISO 8636-2:2007
Machine tools
Test conditions for bridge-type milling machines
12/14/2007 - Paper - English -
Learn More€199.00 -
ISO 8636-2:2007
Machine tools
Test conditions for bridge-type milling machines
12/14/2007 - Paper - French -
Learn More€199.00 -
ISO 3070-1:2007 (R2019)
Machine tools
Test conditions for testing the accuracy of boring and milling machines with horizontal spindle
12/10/2007 - Paper - French -
Learn More€223.00 -
ISO 3070-3:2007 (R2019)
Machine tools
Test conditions for testing the accuracy of boring and milling machines with horizontal spindle
12/10/2007 - Paper - English -
Learn More€223.00 -
ISO 3070-3:2007 (R2019)
Machine tools
Test conditions for testing the accuracy of boring and milling machines with horizontal spindle
12/10/2007 - Paper - French -
Learn More€223.00 -
ISO 3070-1:2007 (R2019)
Machine tools
Test conditions for testing the accuracy of boring and milling machines with horizontal spindle
12/10/2007 - Paper - English -
Learn More€223.00 -
BS ISO 2351-1:2007
Assembly tools for screws and nuts. Machine-operated screwdriver bits Screwdriver slotted head
9/28/2007 - PDF - English -
Learn More€151.00 -
JIS B 6203-1:2007 (R2016)
Test conditions for milling machines with table of variable height - Testing of the accuracy - Part 1: Machines with horizontal spindle
9/20/2007 - PDF - Japanese -
Learn More€36.27 -
JIS B 6203-2:2007 (R2016)
Test conditions for milling machines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle
9/20/2007 - PDF - Japanese -
Learn More€25.00 -
€0.00
-
€0.00
-
€0.00
-
€0.00
-
€0.00
-
JIS B 6196:2006 (R2015)
Test code for machine tools - Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
8/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS B 6213:2006 (R2015)
Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy
7/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS B 6225:2006 (R2015)
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with vertical spindle
7/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS B 6212:2006 (R2015)
Machine tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy
7/20/2006 - PDF - Japanese -
Learn More€41.86 -
JIS B 6226:2006 (R2015)
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with horizontal spindle
7/20/2006 - PDF - Japanese -
Learn More€36.27 -
JIS B 6211:2006 (R2015)
Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of the accuracy
7/20/2006 - PDF - Japanese -
Learn More€25.00 -
UNE 15304-2:2006
Test conditions for milling machines with table of variable height. Testing of accuracy. Part 2: Machines with vertical spindle.
5/10/2006 - PDF - Spanish -
Learn More€69.00 -
UNE 15304-1:2006
Test conditions for milling machines with table of variable height -- Testing of the accuracy -- Part 1: Machines with horizontal spindle
5/10/2006 - PDF - Spanish -
Learn More€74.00 -
JIS C 9029-2-10:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders
4/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS C 9029-2-1:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saws
4/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS C 9029-2-9:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws
4/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS C 9029-2-2:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-2: Particular requirements for radial arm saws
4/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS C 9029-2-5:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws
4/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS C 9029-2-3:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers
4/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS C 9029-2-4:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders
4/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS C 9029-2-7:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-7: Particular requirements for diamond saws with water supply
4/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS C 9029-2-11:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws
4/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS C 9029-2-8:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders
4/20/2006 - PDF - Japanese -
Learn More€25.00 -
JIS C 9029-2-6:2006 (R2016)
Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply
4/20/2006 - PDF - Japanese -
Learn More€25.00 -
DIN ISO 230-5:2006-03
Test code for machine tools - Part 5: Determination of the noise emission (ISO 230-5:2000)
3/1/2006 - PDF - German -
Learn More€99.35 -
DIN ISO 230-5:2006-03
Test code for machine tools - Part 5: Determination of the noise emission (ISO 230-5:2000)
3/1/2006 - PDF - English -
Learn More€124.21 -
DIN EN 50370-1 VDE 0875-370-1:2006-02
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission; German version EN 50370-1:2005
2/1/2006 - Paper - German -
Learn More€61.54 -
UNE-EN 50370-1:2005 (R2019)
Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 1: Emission
12/14/2005 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 50370-1:2005 (R2019)
Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 1: Emission
12/14/2005 - PDF - English -
Learn More€81.60 -
PD ISO/TR 230-9:2005
Test code for machine tools Estimation of measurement uncertainty tool tests according to series ISO 230, basic equations
12/5/2005 - PDF - English -
Learn More€293.00 -
NF ISO 1701-1, E60-111-1 (12/2005)
Test conditions for milling machines with table of variable height - Testing of the accuracy - Part 1 : machines with horizontal spindle - Conditions d'essai des machines à fraiser à table de hauteur variable
12/1/2005 - Paper - French -
Learn More€99.00 -
NF ISO 1701-2, E60-111-2 (12/2005)
Test conditions for milling machines with table of variable height - Testing of accuracy - Part 2 : machines with vertical spindle - Conditions d'essai des machines à fraiser à table de hauteur variable
12/1/2005 - Paper - French -
Learn More€86.67 -
NF EN 61029-1/A12, C75-200/A12 (11/2005)
Safety of transportable motor-operated electric tools - Part 1 : general requirements
11/1/2005 - Paper - French -
Learn More€54.67 -
NF EN 61029-1/A11, C75-200/A11 (11/2005)
Safety of transportable motor-operated electric tools - Part 1 : general requirements
11/1/2005 - Paper - French -
Learn More€54.67 -
NF EN 61029-1, C75-200 (10/2005)
Safety of transportable motor-operated electric tools - Part 1 : general requirements
10/1/2005 - Paper - French -
Learn More€197.00 -
BS EN 50370-1:2005
Electromagnetic compatibility (EMC). Product family standard for machine tools Emission
8/9/2005 - PDF - English -
Learn More€180.00 -
FD ISO/TR 230-9, E60-100-9 (08/2005)
Test code for machine tools - Part 9 : estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
8/1/2005 - Paper - French -
Learn More€86.50 -
ISO/TR 230-9:2005 (R2013)
Test code for machine tools
Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
3/10/2005 - Paper - English -
Learn More€148.00 -
ISO/TR 230-9:2005 (R2013)
Test code for machine tools
Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
3/10/2005 - Paper - French -
Learn More€148.00 -
UNE 15302-2:2004 ERRATUM
Manually controlled milling machines with table of fixed height. Test conditions. Testing of the accuracy. Part 2: Machines with vertical spindle.
11/12/2004 - PDF - Spanish -
Learn More€0.00 -
UNE 15302-1:2004 ERRATUM
Manually controled milling machines with table of fixed height. Test conditions. Testing of the accuracy. Part 1: Machines with horizontal spindle.
11/12/2004 - PDF - Spanish -
Learn More€0.00 -
ISO 1701-1:2004 (R2019)
Test conditions for milling machines with table of variable height
Testing of the accuracy
9/3/2004 - Paper - English -
Learn More€174.00 -
ISO 1701-1:2004 (R2019)
Test conditions for milling machines with table of variable height
Testing of the accuracy
9/3/2004 - Paper - French -
Learn More€174.00 -
ISO 1701-2:2004 (R2019)
Test conditions for milling machines with table of variable height
Testing of accuracy
9/3/2004 - Paper - English -
Learn More€148.00 -
ISO 1701-2:2004 (R2019)
Test conditions for milling machines with table of variable height
Testing of accuracy
9/3/2004 - Paper - French -
Learn More€148.00 -
UNE 15601:2004
Wire electrical-discharge machines (wire EDM). Test conditions. Terminology and testing of the accuracy.
7/23/2004 - PDF - Spanish -
Learn More€69.00 -
UNE 15324-1:2004
Bridge-type milling machines. Testing of the accuracy. Part 1: Fixed bridge (portal type) machines.
7/9/2004 - PDF - Spanish -
Learn More€78.00 -
UNE-EN 50370-2:2004
Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 2: Immunity
6/25/2004 - PDF - English -
Learn More€82.80 -
UNE-EN 50370-2:2004
Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 2: Immunity
6/25/2004 - PDF - Spanish -
Learn More€69.00 -
UNE 15319:2004 (R2022)
External cylindrical and universal grinding machines with a movable table. Test conditions. Testing of the accuracy.
6/18/2004 - PDF - Spanish -
Learn More€74.00 -
UNE 15317:2004
Surface grinding machines with two columns. Machines for grinding slideways. Test conditions. Testing of the accuracy.
6/4/2004 - PDF - Spanish -
Learn More€74.00 -
UNE 15316:2004
Surface grinding machines with vertical grinding wheel spindle and reciprocating table. Test conditions. Testing of the accuracy.
6/4/2004 - PDF - Spanish -
Learn More€63.00 -
JIS B 6251:2004 (R2014)
Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy
5/20/2004 - PDF - Japanese -
Learn More€25.00 -
€25.00
-
UNE 15313-2:2004 (R2022)
High accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle. Test conditions. Testing of the accuracy. Part 2: Portal type machines with moving table.
4/16/2004 - PDF - Spanish -
Learn More€68.00 -
UNE 15313-1:2004 (R2022)
High accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle. Test conditions. Testing of the accuracy. Part 1: Single colummn type machines.
4/16/2004 - PDF - Spanish -
Learn More€68.00 -
€25.00
-
BS ISO 16156:2004
Machine-tools safety. Safety requirements for the design and construction of work holding chucks
2/1/2004 - PDF - English -
Learn More€151.00 -
ISO 16156:2004 (R2019)
Machine-tools safety
Safety requirements for the design and construction of work holding chucks
1/21/2004 - Paper - French -
Learn More€48.00 -
ISO 16156:2004 (R2019)
Machine-tools safety
Safety requirements for the design and construction of work holding chucks
1/21/2004 - Paper - English -
Learn More€48.00 -
JIS B 6228:2003 (R2013)
Bridge type plano-milling machines - Testing of the accuracy
12/20/2003 - PDF - Japanese -
Learn More€46.02 -
UNE 15321:2003 ERRATUM
Internal cylindrical grinding machines with horizontal spindle. Test conditions. Testing of the accuracy.
11/21/2003 - PDF - Spanish -
Learn More€0.00 -
UNE 15302-1:2003
Manually controled milling machines with table of fixed height. Test conditions. Testing of the accuracy. Part 1: Machines with horizontal spindle.
10/31/2003 - PDF - Spanish -
Learn More€70.00 -
UNE 15302-2:2003
Manually controlled milling machines with table of fixed height. Test conditions. Testing of the accuracy. Part 2: Machines with vertical spindle.
10/31/2003 - PDF - Spanish -
Learn More€68.00 -
NF ISO 230-6, E60-145 (10/2003)
Test code for machines tools - Part 6 : determination of positioning accuracy on body and face diagonals (Digital displacement tests)
10/1/2003 - Paper - French -
Learn More€86.50 -
DIN EN 50370-2 VDE 0875-370-2:2003-08
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity; German version EN 50370-2:2003
8/1/2003 - Paper - German -
Learn More€69.60 -
JIS B 6195:2003 (R2017)
Test code for machine tools - Determination of the noise emission
2/20/2003 - PDF - Japanese -
Learn More€36.27 -
UNE 15321:2003
Internal cylindrical grinding machines with horizontal spindle. Test conditions. Testing of the accuracy.
2/14/2003 - PDF - Spanish -
Learn More€69.00 -
BS EN 50370-2:2003
Electromagnetic compatibility (EMC). Product family standard for machine tools Immunity
1/24/2003 - PDF - English -
Learn More€250.00 -
NF ISO 230-5, S31-069 (01/2003)
Test code for machine tools - Part 5 : determination of the noise emission
1/1/2003 - Paper - French -
Learn More€119.00 -
UNE 15300-5:2002 (R2021)
Machine-tools. Test code for machine tools. Part 5: Determination of the noise emission.
12/10/2002 - PDF - Spanish -
Learn More€73.00 -
BS ISO 230-6:2002
Test code for machine tools Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
11/28/2002 - PDF - English -
Learn More€180.00 -
ISO 230-6:2002
Test code for machine tools
Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
11/8/2002 - Paper - English -
Learn More€72.00 -
ISO 230-6:2002
Test code for machine tools
Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
11/8/2002 - Paper - French -
Learn More€72.00 -
BS ISO 2351-2:2002
Assembly tools for screws and nuts. Machine-operated screwdriver bits Screwdriver cross-recessed head
10/9/2002 - PDF - English -
Learn More€151.00 -
IEC 60745-2-4:2002
IEC 60745-2-4:2002 Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
7/31/2002 - PDF - English, French -
Learn More€46.00 -
IEC 60745-2-4:2002
IEC 60745-2-4:2002 Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
7/31/2002 - PDF - English -
Learn More€46.00 -
IEC 61029-2-5:1993/AMD1:2001
IEC 61029-2-5:1993/AMD1:2001 Amendment 1 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for band saws
11/28/2001 - PDF - English, French -
Learn More€12.00 -
IEC 61029-2-3:1993/AMD1:2001
IEC 61029-2-3:1993/AMD1:2001 Amendment 1 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers
11/27/2001 - PDF - English, French -
Learn More€12.00 -
BS ISO 4703:2001
Test conditions for surface grinding machines with two columns. Machines for grinding slideways. Testing of the accuracy
9/17/2001 - PDF - English -
Learn More€293.00 -
ISO 4703:2001 (R2023)
Test conditions for surface grinding machines with two columns
Machines for grinding slideways
8/30/2001 - Paper - French -
Learn More€174.00 -
ISO 4703:2001 (R2023)
Test conditions for surface grinding machines with two columns
Machines for grinding slideways
8/30/2001 - Paper - English -
Learn More€174.00 -
BS ISO 1984-1:2001
Test conditions for manually controlled milling machines with table of fixed height. Testing the accuracy Machines horizontal spindle
8/15/2001 - PDF - English -
Learn More€250.00 -
BS ISO 1984-2:2001
Test conditions for manually controlled milling machines with table of fixed height. Testing the accuracy Machines vertical spindle
8/15/2001 - PDF - English -
Learn More€250.00 -
NF ISO 1984-1, E60-112-1 (08/2001)
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - - Part 1 : machines with horizontal spindle - Conditions d'essai des machines à fraiser à table de hauteur fixe à commande manuelle
8/1/2001 - Paper - French -
Learn More€99.33 -
NF ISO 1984-2, E60-112-2 (08/2001)
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Part 2 : machines with vertical spindle - Conditions d'essai des machines à fraiser à table de hauteur fixe à commande manuelle
8/1/2001 - Paper - French -
Learn More€99.33 -
IEC 61029-2-11:2001
IEC 61029-2-11:2001 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws
7/31/2001 - PDF - English -
Learn More€132.00 -
ISO 1984-1:2001 (R2023)
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy
Part 1: Machines with horizontal spindle
6/14/2001 - Paper - English -
Learn More€148.00 -
ISO 1984-1:2001 (R2023)
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy
Part 1: Machines with horizontal spindle
6/14/2001 - Paper - French -
Learn More€148.00 -
ISO 1984-2:2001 (R2023)
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy
Part 2: Machines with vertical spindle
6/14/2001 - Paper - English -
Learn More€110.00 -
ISO 1984-2:2001 (R2023)
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy
Part 2: Machines with vertical spindle
6/14/2001 - Paper - French -
Learn More€110.00 -
IEC 61029-2-8:1995/AMD2:2001
IEC 61029-2-8:1995/AMD2:2001 Amendment 2 - Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders
5/22/2001 - PDF - English, French -
Learn More€12.00 -
IEC 61029-2-4:1993/AMD1:2001
IEC 61029-2-4:1993/AMD1:2001 Amendment 1 - Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders
5/18/2001 - PDF - English -
Learn More€46.00 -
BS ISO 230-5:2000
Test code for machine tools Determination of the noise emission
11/15/2000 - PDF - English -
Learn More€293.00 -
BS ISO 3686-2:2000
Test conditions for high accuracy turret and single spindle coordinate drilling boring machines with table of fixed height vertical spindle. Testing the Portal type moving
9/15/2000 - PDF - English -
Learn More€250.00 -
BS ISO 3686-1:2000
Test conditions for high accuracy turret and single spindle coordinate drilling boring machines with table of fixed height vertical spindle. Testing the Single column type
9/15/2000 - PDF - English -
Learn More€250.00 -
ISO 3686-2:2000 (R2022)
Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle
Testing of the accuracy
7/20/2000 - Paper - French -
Learn More€110.00 -
ISO 3686-1:2000 (R2022)
Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle
Testing of the accuracy
7/20/2000 - Paper - English -
Learn More€110.00 -
ISO 3686-1:2000 (R2022)
Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle
Testing of the accuracy
7/20/2000 - Paper - French -
Learn More€110.00 -
ISO 3686-2:2000 (R2022)
Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle
Testing of the accuracy
7/20/2000 - Paper - English -
Learn More€110.00 -
NF ISO 8636-1, E60-163 (06/2000)
Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 1 : fixed bridge (portal-type) machines - Machines-outils
6/1/2000 - Paper - French -
Learn More€119.00 -
NF ISO 2433, E60-124 (03/2000)
Machines tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy - Machines-outils
3/1/2000 - Paper - French -
Learn More€108.00 -
ISO 8636-1:2000
Machine tools
Test conditions for bridge-type milling machines
2/17/2000 - Paper - English -
Learn More€199.00 -
ISO 8636-1:2000
Machine tools
Test conditions for bridge-type milling machines
2/17/2000 - Paper - French -
Learn More€199.00 -
NF ISO 2407, E60-123 (01/2000)
Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy
1/1/2000 - Paper - French -
Learn More€99.33 -
ISO 2433:1999 (R2022)
Machine tools
Test conditions for external cylindrical and universal grinding machines with a movable table
12/16/1999 - Paper - French -
Learn More€174.00 -
ISO 2433:1999 (R2022)
Machine tools
Test conditions for external cylindrical and universal grinding machines with a movable table
12/16/1999 - Paper - English -
Learn More€174.00 -
DIN ISO 2407:1999-12
Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy (ISO 2407:1997)
12/1/1999 - PDF - English -
Learn More€107.48 -
DIN ISO 2407:1999-12
Machine tools - Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy (ISO 2407:1997)
12/1/1999 - PDF - German -
Learn More€85.79 -
IEC 61029-2-8:1995/AMD1:1999
IEC 61029-2-8:1995/AMD1:1999 Amendment 1 - Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders
2/19/1999 - PDF - English -
Learn More€12.00 -
BS ISO 6155:1998
Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy
6/15/1998 - PDF - English -
Learn More€293.00 -
IEC 61029-2-10:1998
IEC 61029-2-10:1998 Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders
6/11/1998 - PDF - English -
Learn More€132.00 -
ISO 2407:1997
Test conditions for internal cylindrical grinding machines with horizontal spindle
Testing of accuracy
12/25/1997 - Paper - French -
Learn More€148.00 -
ISO 2407:1997
Test conditions for internal cylindrical grinding machines with horizontal spindle
Testing of accuracy
12/25/1997 - Paper - English -
Learn More€148.00 -
DIN ISO 6545:1997-09
Acceptance conditions for gear hobbing machines - Testing of the accuracy (ISO 6545:1992)
9/1/1997 - PDF - German -
Learn More€99.35 -
NF ISO 298, E62-105 (05/1997)
Machine tools. Lathe centres. Sizes for interchangeability. - Machines-outils
5/1/1997 - Paper - French -
Learn More€60.50 -
UNE 15410:1997
ACCEPTANCE CONDITIONS FOR GEAR HOBBING MACHINES. TESTING OF THE ACCURACY.
3/21/1997 - PDF - Spanish -
Learn More€78.00 -
€17.00
-
BS 4656-38:1995
Accuracy of machine tools and methods test Specification for surface finish pieces
7/15/1995 - PDF - English -
Learn More€250.00 -
UNE-EN 61176:1995
HAND-HELD ELECTRIC MAINS VOLTAGE OPERATED CIRCULAR SAWS. METHODS FOR MEASURING THE PERFORMANCE.
6/23/1995 - PDF - Spanish -
Learn More€63.00 -
UNE-EN 61176:1995
HAND-HELD ELECTRIC MAINS VOLTAGE OPERATED CIRCULAR SAWS. METHODS FOR MEASURING THE PERFORMANCE.
6/23/1995 - PDF - English -
Learn More€75.60 -
IEC 61029-2-8:1995
IEC 61029-2-8:1995 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders
4/20/1995 - PDF - English, French -
Learn More€173.00 -
IEC 61029-2-9:1995
IEC 61029-2-9:1995 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for mitre saws
4/7/1995 - PDF - English, French -
Learn More€46.00 -
SAE J 1689:1994-11-01
HYDRAULIC POWER UNITS USED ON MACHINE TOOLS AND EQUIPMENT FOR THE AUTOMOTIVE INDUSTRY
11/1/1994 - PDF - English -
Learn More€131.00 -
€14.00
-
NF ISO 6545, E60-138 (08/1993)
Acceptance conditions for gear hobbing machines. Testing of the accuracy. - Conditions de réception des machines à tailler les engrenages par fraise-mère
8/1/1993 - Paper - French -
Learn More€108.00 -
IEC 61029-2-7:1993
IEC 61029-2-7:1993 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for diamond saws with water supply
3/31/1993 - PDF - English, French -
Learn More€46.00 -
IEC 61029-2-3:1993
IEC 61029-2-3:1993 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers
3/31/1993 - PDF - English, French -
Learn More€92.00 -
IEC 61029-2-2:1993
IEC 61029-2-2:1993 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for radial arm saws
3/31/1993 - PDF - English, French -
Learn More€46.00 -
IEC 61029-2-5:1993
IEC 61029-2-5:1993 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for band saws
3/31/1993 - PDF - English, French -
Learn More€46.00 -
IEC 61029-2-4:1993
IEC 61029-2-4:1993 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for bench grinders
3/31/1993 - PDF - English, French -
Learn More€92.00 -
UNE 15329:1993 (R2021)
ACCEPTANCE CONDITIONS FOR COPYING ATTACHMENTS, INTEGRAL OR OTHERWISE, FOR LATHES. TESTING OF ACCURACY.
3/1/1993 - PDF - Spanish -
Learn More€53.00 -
ISO 6545:1992 (R2019)
Acceptance conditions for gear hobbing machines
Testing of the accuracy
10/21/1992 - Paper - English -
Learn More€174.00 -
ISO 6545:1992 (R2019)
Acceptance conditions for gear hobbing machines
Testing of the accuracy
10/21/1992 - Paper - French -
Learn More€174.00 -
UNE 15322:1992 (R2022)
ACCEPTANCE CONDITIONS FOR VERTICAL TURNING AND BORING LATHES WITH ONE OR TWO COLUMNS AND A SINGLE FIXED OR MOVABLE TABLE. GENERAL INTRODUCTION AND TESTING OF THE ACCURACY.
5/13/1992 - PDF - Spanish -
Learn More€68.00 -
BS 3800-3:1990
General tests for machine tools Method of testing performance machines operating under loaded conditions in respect thermal distortion
9/28/1990 - PDF - English -
Learn More€180.00 -
UNE 15312:1990 (R2021)
TURRET AND SINGLE SPINDLE CO-ORDINATE DRILLING MACHINES WITH VERTICAL SPINDLE. ACCURACY CONTROL.
4/19/1990 - PDF - Spanish -
Learn More€60.00 -
UNE 15310:1990
RADIAL DRILLING MACHINES WITH ADJUSTABLE ARM IN HEIGHT. ACCURACY CONTROL.
4/19/1990 - PDF - Spanish -
Learn More€52.00 -
€52.00
-
ISO 1708:1989 (R2022)
Acceptance conditions for general purpose parallel lathes
Testing of the accuracy
10/19/1989 - Paper - English -
Learn More€110.00 -
ISO 1708:1989 (R2022)
Acceptance conditions for general purpose parallel lathes
Testing of the accuracy
10/19/1989 - Paper - French -
Learn More€110.00 -
DIN 8632-1:1989-05
Machine tools; surface grinding machines with horizontal grinding wheel spindle and rectangular reciprocating table; acceptance conditions
5/1/1989 - PDF - English -
Learn More€57.57 -
DIN 8632-1:1989-05
Machine tools; surface grinding machines with horizontal grinding wheel spindle and rectangular reciprocating table; acceptance conditions
5/1/1989 - PDF - German -
Learn More€45.98 -
BS 4656-2:1988
Accuracy of machine tools and methods test Specification for copying lathes attachments
12/30/1988 - PDF - English -
Learn More€151.00 -
BS 1660-10:1988
Machine tapers Specification for drill chuck (Jacob and short Morse)
9/30/1988 - PDF - English -
Learn More€151.00 -
BS 4656-28:1988
Accuracy of machine tools and methods test Specification for numerically controlled turning machines up to including 1500 mm diameter
8/31/1988 - PDF - English -
Learn More€250.00 -
BS 4656-22:1988
Accuracy of machine tools and methods test Specification for vertical boring turning lathes, single double column types
5/31/1988 - PDF - English -
Learn More€250.00 -
DIN 8630:1988-05
Machine tools; external cylindrical grinding machines with a movable workpiece table; acceptance conditions
5/1/1988 - PDF - English -
Learn More€66.07 -
DIN 8630:1988-05
Machine tools; external cylindrical grinding machines with a movable workpiece table; acceptance conditions
5/1/1988 - PDF - German -
Learn More€52.90 -
BS 4656-36:1987
Accuracy of machine tools and methods test Specification for plano-milling machines, portal type
12/23/1987 - PDF - English -
Learn More€293.00 -
BS 4656-35:1987
Accuracy of machine tools and methods test Specification for capstan, turret automatic lathes, single spindle type less than 25 mm diameter capacity
11/30/1987 - PDF - English -
Learn More€250.00 -
ISO 8956:1986 (R2021)
Acceptance conditions for copying attachments, integral or otherwise, for lathes
Testing of the accuracy
6/19/1986 - Paper - French -
Learn More€72.00 -
ISO 8956:1986 (R2021)
Acceptance conditions for copying attachments, integral or otherwise, for lathes
Testing of the accuracy
6/19/1986 - Paper - English -
Learn More€72.00 -
DIN 1410:1986-06
Machine tools; direction of operation and arrangement of controls
6/1/1986 - PDF - German -
Learn More€32.34 -
ISO 3655:1986 (R2022)
Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table
General introduction and testing of the accuracy
5/1/1986 - Paper - English -
Learn More€110.00 -
ISO 3655:1986 (R2022)
Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table
General introduction and testing of the accuracy
5/1/1986 - Paper - French -
Learn More€110.00 -
DIN 69642:1985-09
Machine tools; modular units; single spindle facing and boring units; constructional sizes
9/1/1985 - PDF - German -
Learn More€32.34 -
€48.00
-
€48.00
-
BS 4581-2:1984
Flanges for mounting grinding wheels on machine tools. Specification dimensions and materials of flanges less than 76.2 mm bore
3/30/1984 - PDF - English -
Learn More€151.00 -
BS 4656-14:1983
Accuracy of machine tools and methods test Specification for broaching machines, vertical internal type
11/30/1983 - PDF - English -
Learn More€151.00 -
BS 4656-13:1983
Accuracy of machine tools and methods test Specification for broaching machines, vertical surface type
11/30/1983 - PDF - English -
Learn More€151.00 -
DIN 24901-3:1983-10
Graphical symbols for technical drawings for use in the engineering and related fields, comminution machines, presentation in flow diagrams
10/1/1983 - PDF - German -
Learn More€32.34 -
DIN 8667:1983-08
Machine tools, vertical internal type broaching machines, acceptance conditions
8/1/1983 - PDF - German -
Learn More€39.35 -
DIN 8665:1983-08
Machine tools, vertical surface type broaching machines, acceptance conditions
8/1/1983 - PDF - German -
Learn More€39.35 -
€37.00 -
DIN 8666:1983-08
Machine tools, horizontal external type broaching machines, acceptance conditions
8/1/1983 - PDF - German -
Learn More€39.35 -
ISO 2423:1982 (R2019)
Acceptance conditions for radial drilling machines with the arm adjustable in height
Testing of accuracy
2/1/1982 - Paper - French -
Learn More€72.00 -
ISO 2423:1982 (R2019)
Acceptance conditions for radial drilling machines with the arm adjustable in height
Testing of accuracy
2/1/1982 - Paper - English -
Learn More€72.00 -
BS 4656-1:1981
Accuracy of machine tools and methods test Specification for lathes, general purpose type
9/30/1981 - PDF - English -
Learn More€180.00 -
BS 4656-29:1981
Accuracy of machine tools and methods test Specification for automatic lathes, multi-spindle (indexing drum) type
9/30/1981 - PDF - English -
Learn More€180.00 -
BS 4656-18:1981
Accuracy of machine tools and methods test Specification for broaching machines, horizontal internal type
8/31/1981 - PDF - English -
Learn More€151.00 -
DIN 69643:1981-02
Machine tools, modular units, single spindle milling units, constructional sizes
2/1/1981 - PDF - German -
Learn More€32.34 -
BS 4656-26:1980
Accuracy of machine tools and methods test Gear shaping machines
6/30/1980 - PDF - English -
Learn More€151.00 -
BS 4656-25:1980
Accuracy of machine tools and methods test Gear planing machines
4/30/1980 - PDF - English -
Learn More€151.00 -
PD 6490:1980
Guide to application of additional symbols (and index) for machine tools
2/29/1980 - PDF - English -
Learn More€180.00 -
€42.00
-
BS 4656-5:1979
Specification for the accuracy of machine tools and methods tests Milling machines, knee column type, horizontal spindle, universal
10/31/1979 - PDF - English -
Learn More€151.00 -
BS 387:1979
Specification for interchangeability dimensions of the drive of solid and segmental circular saws for cold cutting of metals: saw diameter range 224 mm to 2240 mm
2/28/1979 - PDF - English -
Learn More€151.00 -
DIN 8632-4:1978-11
Machine Tools, Surface Grinding Machines, Surface Grinding Machines with Two Columns, Grinding-machines for Grinding Slideways, Acceptance Conditions
11/1/1978 - PDF - English -
Learn More€74.58 -
DIN 8632-4:1978-11
Machine Tools, Surface Grinding Machines, Surface Grinding Machines with Two Columns, Grinding-machines for Grinding Slideways, Acceptance Conditions
11/1/1978 - PDF - German -
Learn More€59.63
