25.060 : Machine tool systems

Items 1 to 200 of 349 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  • DIN 6535:2024-03

    Cylindrical shanks made of hard materials for machining tools - Dimensions
    3/1/2024 - PDF - German - DIN
    Learn More
    €59.63

  • DIN 69063-5:2023-12

    Machine tools - Tool receiver for hollow taper shanks - Part 5: For type E according to DIN 69893-5, Connecting dimensions
    12/1/2023 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 4000-180:2023-10

    Tabular layouts of properties - Part 180: Tool assemblies
    10/1/2023 - PDF - German - DIN
    Learn More
    €158.04

  • DIN 4003-180:2023-10

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 180: Tool assemblies
    10/1/2023 - PDF - German - DIN
    Learn More
    €104.95

  • DIN 69893-5:2023-10

    Hollow taper shanks with flat contact surface - Part 5: Hollow taper shanks type E - Dimensions and design
    10/1/2023 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 69895:2023-10

    Central coolant supply for HSK - Coolant pipe with threaded nut for hollow taper shanks, type E according to DIN 69893-5 - Dimensions
    10/1/2023 - PDF - German - DIN
    Learn More
    €39.35

  • DIN ISO 10889-1:2023-09

    Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore, Technical delivery conditions (ISO 10889-1:2004)
    9/1/2023 - PDF - German - DIN
    Learn More
    €59.63

  • DIN 4000-193:2023-06

    Tabular layouts of properties - Part 193: Laser measuring device
    6/1/2023 - PDF - German - DIN
    Learn More
    €99.35

  • DIN 69882-8:2023-05

    Tool holders with hollow taper shanks according to DIN 69893-1 - Part 8: Shrink chuck - Dimensions
    5/1/2023 - PDF - German - DIN
    Learn More
    €99.35

  • DIN 69882-7:2023-05

    Tool holders with hollow taper shanks according to DIN 69893-1 - Part 7: Expansion clamping chuck - Dimensions
    5/1/2023 - PDF - German - DIN
    Learn More
    €92.62

  • DIN 4000-192:2023-05

    Tabular layouts of properties - Part 192: Positioning elements
    5/1/2023 - PDF - German - DIN
    Learn More
    €126.26

  • DIN SPEC 28999:2023-05

    Hollow taper shanks with flat contact surface and machine tools receiver for hollow taper shanks, HSK-EZ15 - Dimensions and conception
    5/1/2023 - PDF - German - DIN
    Learn More
    €0.00

  • DIN 332-4:2023-01

    Centre holes for rail vehicles axles
    1/1/2023 - PDF - German - DIN
    Learn More
    €32.34

  • DIN ISO 7388-2:2021-12

    Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF (ISO 7388-2:2007)
    12/1/2021 - PDF - German - DIN
    Learn More
    €59.63

  • DIN 6367:2021-11

    Cutter retaining screws for milling machine arbors
    11/1/2021 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 69882-9:2021-09

    Tool holders with hollow taper shanks according to ISO 12164-1 - Part 9: Axial adjusting screws for tool holders according to DIN 69882-7 and DIN 69882-8 - Types, designs, dimensions
    9/1/2021 - PDF - German - DIN
    Learn More
    €79.72

  • DIN 8030:2021-08

    Face milling cutters for indexable inserts
    8/1/2021 - PDF - German - DIN
    Learn More
    €65.89

  • DIN 4000-191:2021-06

    Tabular layouts of properties - Part 191: Clamping elements
    6/1/2021 - PDF - German - DIN
    Learn More
    €136.82

  • DIN 4000-96:2021-06

    Tabular layouts of properties - Part 96: Interface coding for clamping elements for radial and linear force application
    6/1/2021 - PDF - German - DIN
    Learn More
    €92.62

  • DIN 8816:2021-04

    Threaded tool adaptors for wood working machines, tool shanks and spindle ends
    4/1/2021 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 8025-2:2021-02

    Tool holders for internal turning, with cylindrical shank, for indexable inserts - Part 2: Style F
    2/1/2021 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 8025-3:2021-02

    Tool holders for internal turning, with cylindrical shank, for indexable inserts - Part 3: Style K
    2/1/2021 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 1809:2021-01

    Driving tenons for tools with parallel shank
    1/1/2021 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 2082-1:2020-12

    Nuts for milling machine arbors
    12/1/2020 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 4000-190:2020-07

    Tabular layouts of properties - Part 190: Clamping devices
    7/1/2020 - PDF - German - DIN
    Learn More
    €158.04

  • DIN 4003-190:2020-07

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 190: Clamping devices.
    7/1/2020 - PDF - German - DIN
    Learn More
    €104.95

  • DIN 4003-90:2018-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 90: Tool holders for indexable inserts.
    12/1/2018 - PDF - German - DIN
    Learn More
    €201.96

  • DIN 4000-90:2018-12

    Tabular layouts of properties - Part 90: Tool holders for indexable inserts
    12/1/2018 - PDF - German - DIN
    Learn More
    €104.95

  • DIN ISO 12164-3:2018-12

    Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools (ISO 12164-3:2014)
    12/1/2018 - PDF - German - DIN
    Learn More
    €59.63

  • DIN ISO 12164-4:2018-12

    Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools (ISO 12164-4:2014)
    12/1/2018 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 9811-2:2018-10

    Press tool sets - Part 2: Directives for mounting
    10/1/2018 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 9811-1:2018-08

    Press tool sets - Part 1: Technical specifications
    8/1/2018 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 4000-180:2017-11

    Tabular layouts of properties - Part 180: Tool assemblies
    11/1/2017 - PDF - German - DIN
    Learn More
    €115.33

  • DIN 4003-180:2017-11

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 180: Tool assemblies.
    11/1/2017 - PDF - German - DIN
    Learn More
    €99.35

  • DIN 4000-95:2016-12

    Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices
    12/1/2016 - PDF - German - DIN
    Learn More
    €174.39

  • DIN 4000-178:2016-12

    Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli
    12/1/2016 - PDF - German - DIN
    Learn More
    €131.96

  • DIN 4003-178:2016-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 178: Probing systems, stylus systems and styli.
    12/1/2016 - PDF - German - DIN
    Learn More
    €79.72

  • DIN 69002-1:2016-06

    Machine tools - Stub spindles - Part 1: General, description, basic principles.
    6/1/2016 - PDF - German - DIN
    Learn More
    €59.63

  • DIN 69002-2:2016-06

    Machine tools - Stub spindles - Part 2: Dimensions and lists of parts, designation.
    6/1/2016 - PDF - German - DIN
    Learn More
    €79.72

  • DIN 69002-3:2016-06

    Machine tools - Stub spindles - Part 3: Components.
    6/1/2016 - PDF - German - DIN
    Learn More
    €72.80

  • DIN ISO 7388-3:2015-03

    Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF (ISO 7388-3:2013)
    3/1/2015 - PDF - German - DIN
    Learn More
    €59.63

  • DIN ISO 7388-3:2015-03

    Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF (ISO 7388-3:2013)
    3/1/2015 - PDF - English - DIN
    Learn More
    €74.58

  • DIN ISO 5610-1:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 1: General survey, correlation and determination of dimensions (ISO 5610-1:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €79.72

  • DIN ISO 5610-1:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 1: General survey, correlation and determination of dimensions (ISO 5610-1:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €99.44

  • DIN ISO 5610-2:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 2: Style A (ISO 5610-2:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €52.90

  • DIN ISO 5610-2:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 2: Style A (ISO 5610-2:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €66.07

  • DIN ISO 5610-3:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 3: Style B (ISO 5610-3:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €52.90

  • DIN ISO 5610-3:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 3: Style B (ISO 5610-3:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €66.07

  • DIN ISO 5610-4:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 4: Style D (ISO 5610-4:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €52.90

  • DIN ISO 5610-4:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 4: Style D (ISO 5610-4:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €66.07

  • DIN ISO 5610-5:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 5: Style F (ISO 5610-5:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €59.63

  • DIN ISO 5610-5:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 5: Style F (ISO 5610-5:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €74.58

  • DIN ISO 5610-6:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 6: Style G (ISO 5610-6:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €52.90

  • DIN ISO 5610-6:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 6: Style G (ISO 5610-6:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €66.07

  • DIN ISO 5610-7:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 7: Style J (ISO 5610-7:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €59.63

  • DIN ISO 5610-7:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 7: Style J (ISO 5610-7:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €74.58

  • DIN ISO 5610-8:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 8: Style K (ISO 5610-8:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €59.63

  • DIN ISO 5610-8:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 8: Style K (ISO 5610-8:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €74.58

  • DIN ISO 5610-9:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 9: Style L (ISO 5610-9:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €52.90

  • DIN ISO 5610-9:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 9: Style L (ISO 5610-9:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €66.07

  • DIN ISO 5610-10:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 10: Style N (ISO 5610-10:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €52.90

  • DIN ISO 5610-10:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 10: Style N (ISO 5610-10:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €66.07

  • DIN ISO 5610-11:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 11: Style R (ISO 5610-11:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €52.90

  • DIN ISO 5610-11:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 11: Style R (ISO 5610-11:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €66.07

  • DIN ISO 5610-12:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 12: Style S (ISO 5610-12:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €65.89

  • DIN ISO 5610-12:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 12: Style S (ISO 5610-12:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €82.52

  • DIN ISO 5610-13:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 13: Style T (ISO 5610-13:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €45.98

  • DIN ISO 5610-13:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 13: Style T (ISO 5610-13:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €57.57

  • DIN ISO 5610-14:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 14: Style H (ISO 5610-14:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €52.90

  • DIN ISO 5610-14:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 14: Style H (ISO 5610-14:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €66.07

  • DIN ISO 5610-15:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 15: Style V (ISO 5610-15:2014)
    2/1/2015 - PDF - German - DIN
    Learn More
    €45.98

  • DIN ISO 5610-15:2015-02

    Tool holders with rectangular shank for indexable inserts - Part 15: Style V (ISO 5610-15:2014)
    2/1/2015 - PDF - English - DIN
    Learn More
    €57.57

  • DIN ISO 7388-1:2014-07

    Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007)
    7/1/2014 - PDF - German - DIN
    Learn More
    €52.90

  • DIN ISO 7388-1:2014-07

    Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007)
    7/1/2014 - PDF - English - DIN
    Learn More
    €66.07

  • DIN 9834:2014-03

    Tools for pressing - Guide bushes
    3/1/2014 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 6386-1:2014-03

    Lathe chucks - Part 1: Technical conditions of delivery for hand operated lathe chucks
    3/1/2014 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 4003-89:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 89: Adaptive items for tools and extenders.
    12/1/2013 - PDF - German - DIN
    Learn More
    €115.33

  • DIN 4003-93:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads.
    12/1/2013 - PDF - German - DIN
    Learn More
    €158.04

  • DIN 4003-172:2013-12

    Concept for the design of 3D models based on properties according to DIN 4000 - Part 172: Driven tool units.
    12/1/2013 - PDF - German - DIN
    Learn More
    €126.26

  • DIN ISO 26622-2:2013-10

    Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers (ISO 26622-2:2008)
    10/1/2013 - PDF - German - DIN
    Learn More
    €39.35

  • DIN ISO 26622-2:2013-10

    Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers (ISO 26622-2:2008)
    10/1/2013 - PDF - English - DIN
    Learn More
    €49.16

  • DIN 6597:2013-09

    Tool holders for external and internal turning with hollow taper shank for indexable inserts - Designation
    9/1/2013 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 6598:2013-09

    Tool holders for external and internal turning with hollow taper shank for indexable inserts - General survey, Correlation of dimensions
    9/1/2013 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 4000-93:2013-08

    Tabular layouts of properties - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads
    8/1/2013 - PDF - German - DIN
    Learn More
    €85.79

  • DIN ISO 26622-1:2013-08

    Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks (ISO 26622-1:2008)
    8/1/2013 - PDF - German - DIN
    Learn More
    €65.89

  • DIN ISO 26622-1:2013-08

    Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks (ISO 26622-1:2008)
    8/1/2013 - PDF - English - DIN
    Learn More
    €82.52

  • DIN 79:2013-02

    Squares for operating spindles and operating elements
    2/1/2013 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 9831-1:2013-01

    Tools for pressing - Guide bushes for press tool sets - Part 1: Type AG, Type BG and Type CG, gliding bushes
    1/1/2013 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 9831-2:2013-01

    Tools for pressing - Guide bushes for press tool sets - Part 2: Type AW, Type BW and Type CW, ball cage bushes
    1/1/2013 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 4000-172:2012-12

    Tabular layouts of properties - Part 172: Driven tool units
    12/1/2012 - PDF - German - DIN
    Learn More
    €99.35

  • DIN 69893-5:2012-10

    Hollow taper shanks with flat contact surface - Part 5: Hollow taper shanks type E, Dimensions and design
    10/1/2012 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 69063-5:2012-10

    Machine tools - Tool receiver for hollow taper shanks - Part 5: For type E according to DIN 69893-5, Connecting dimensions
    10/1/2012 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 9833:2012-07

    Tools for pressing - Guide pillars, type D
    7/1/2012 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 4000-89:2012-03

    Tabular layouts of properties - Part 89: Adaptive items for tools and extenders
    3/1/2012 - PDF - German - DIN
    Learn More
    €148.04

  • DIN 4000-94:2012-01

    Tabular layouts of properties - Part 94: Quick change adaptors
    1/1/2012 - PDF - German - DIN
    Learn More
    €65.89

  • DIN 69010:2011-11

    Transfer centers - Interface machine frame - Multi spindle heads and other modular units, Frame sizes and dimensions
    11/1/2011 - PDF - German - DIN
    Learn More
    €79.72

  • DIN 2080-1:2011-11

    7/24 taper shanks for tools and clamping devices - Part 1: Type A
    11/1/2011 - PDF - German - DIN
    Learn More
    €39.35

  • DIN ISO 11900-1:2011-10

    Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty (ISO 11900-1:2007)
    10/1/2011 - PDF - German - DIN
    Learn More
    €45.98

  • DIN ISO 11900-1:2011-10

    Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty (ISO 11900-1:2007)
    10/1/2011 - PDF - English - DIN
    Learn More
    €57.57

  • DIN ISO 11900-2:2011-10

    Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty (ISO 11900-2:2008)
    10/1/2011 - PDF - German - DIN
    Learn More
    €45.98

  • DIN ISO 11900-2:2011-10

    Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty (ISO 11900-2:2008)
    10/1/2011 - PDF - English - DIN
    Learn More
    €57.57

  • DIN 9832:2011-04

    Tools for pressing - Holder for guide bushes and guide pillars
    4/1/2011 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 69893-1:2011-04

    Hollow taper shanks with flange contact surface - Part 1: Hollow taper shanks type A and type C, Dimensions and design
    4/1/2011 - PDF - German - DIN
    Learn More
    €65.89

  • DIN ISO 3408-1:2011-04

    Ball screws - Part 1: Vocabulary and designation (ISO 3408-1:2006)
    4/1/2011 - PDF - German - DIN
    Learn More
    €72.80

  • DIN ISO 3408-1:2011-04

    Ball screws - Part 1: Vocabulary and designation (ISO 3408-1:2006)
    4/1/2011 - PDF - English - DIN
    Learn More
    €91.12

  • DIN ISO 3408-3:2011-04

    Ball screws - Part 3: Acceptance conditions and acceptance tests (ISO 3408-3:2006)
    4/1/2011 - PDF - German - DIN
    Learn More
    €92.62

  • DIN ISO 3408-3:2011-04

    Ball screws - Part 3: Acceptance conditions and acceptance tests (ISO 3408-3:2006)
    4/1/2011 - PDF - English - DIN
    Learn More
    €115.98

  • DIN ISO 3408-4:2011-04

    Ball screws - Part 4: Static axial rigidity (ISO 3408-4:2006)
    4/1/2011 - PDF - German - DIN
    Learn More
    €72.80

  • DIN ISO 3408-4:2011-04

    Ball screws - Part 4: Static axial rigidity (ISO 3408-4:2006)
    4/1/2011 - PDF - English - DIN
    Learn More
    €91.12

  • DIN ISO 3408-5:2011-04

    Ball screws - Part 5: Static and dynamic axial load ratings and operational life (ISO 3408-5:2006)
    4/1/2011 - PDF - German - DIN
    Learn More
    €72.80

  • DIN ISO 3408-5:2011-04

    Ball screws - Part 5: Static and dynamic axial load ratings and operational life (ISO 3408-5:2006)
    4/1/2011 - PDF - English - DIN
    Learn More
    €91.12

  • DIN 649:2010-12

    T-slots for T-head bolts
    12/1/2010 - PDF - German - DIN
    Learn More
    €32.34

  • DIN ISO 3089:2010-11

    Machine tools - Test conditions for self-centring, manually-operated chucks with one-piece jaws (ISO 3089:2005)
    11/1/2010 - PDF - German - DIN
    Learn More
    €65.89

  • DIN ISO 3089:2010-11

    Machine tools - Test conditions for self-centring, manually-operated chucks with one-piece jaws (ISO 3089:2005)
    11/1/2010 - PDF - English - DIN
    Learn More
    €82.52

  • DIN ISO 16367:2010-09

    Tools for pressing - Guide plates - U- and V-blocks (ISO 16367:2008)
    9/1/2010 - PDF - German - DIN
    Learn More
    €45.98

  • DIN ISO 16367:2010-09

    Tools for pressing - Guide plates - U- and V-blocks (ISO 16367:2008)
    9/1/2010 - PDF - English - DIN
    Learn More
    €57.57

  • DIN 6338:2010-08

    Assembling grooves for tool and work holders
    8/1/2010 - PDF - German - DIN
    Learn More
    €22.99

  • DIN ISO 3442-1:2010-08

    Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws (ISO 3442-1:2005)
    8/1/2010 - PDF - German - DIN
    Learn More
    €65.89

  • DIN ISO 3442-1:2010-08

    Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws (ISO 3442-1:2005)
    8/1/2010 - PDF - English - DIN
    Learn More
    €82.52

  • DIN ISO 3442-2:2010-08

    Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws (ISO 3442-2:2005)
    8/1/2010 - PDF - German - DIN
    Learn More
    €59.63

  • DIN ISO 3442-2:2010-08

    Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws (ISO 3442-2:2005)
    8/1/2010 - PDF - English - DIN
    Learn More
    €74.58

  • DIN ISO 3442-3:2010-08

    Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws (ISO 3442-3:2007)
    8/1/2010 - PDF - German - DIN
    Learn More
    €72.80

  • DIN ISO 3442-3:2010-08

    Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws (ISO 3442-3:2007)
    8/1/2010 - PDF - English - DIN
    Learn More
    €91.12

  • DIN 6353:2010-08

    Lathe chucks, power-operated, without trough-hole - Cross tenon type jaw mounting
    8/1/2010 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 6351-2:2010-05

    Lathe chucks, hand-operated - Jaws with centrical clamping individually adjustable - Part 2: Mounting recess with 1:4 taper
    5/1/2010 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 6351-1:2010-05

    Lathe chucks, hand-operated - Jaws with centrical clamping individually adjustable - Part 1: Cylindrical mounting recess
    5/1/2010 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 6350-1:2010-05

    Lathe chucks, hand-operated - Centric clamp - Part 1: Cylindrical mounting recess
    5/1/2010 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 6350-2:2010-05

    Lathe chucks, hand-operated - Centric clamp - Part 2: Mounting recess with 1:4 taper
    5/1/2010 - PDF - German - DIN
    Learn More
    €45.98

  • DIN ISO 702-1:2010-04

    Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection (ISO 702-1:2009)
    4/1/2010 - PDF - German - DIN
    Learn More
    €45.98

  • DIN ISO 702-1:2010-04

    Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection (ISO 702-1:2009)
    4/1/2010 - PDF - English - DIN
    Learn More
    €57.57

  • DIN ISO 702-2:2010-04

    Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type (ISO 702-2:2007)
    4/1/2010 - PDF - German - DIN
    Learn More
    €59.63

  • DIN ISO 702-2:2010-04

    Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type (ISO 702-2:2007)
    4/1/2010 - PDF - English - DIN
    Learn More
    €74.58

  • DIN ISO 702-3:2010-04

    Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type (ISO 702-3:2007)
    4/1/2010 - PDF - German - DIN
    Learn More
    €59.63

  • DIN ISO 702-3:2010-04

    Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type (ISO 702-3:2007)
    4/1/2010 - PDF - English - DIN
    Learn More
    €74.58

  • DIN ISO 702-4:2010-04

    Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 4: Cylindrical connection (ISO 702-4:2004)
    4/1/2010 - PDF - German - DIN
    Learn More
    €32.34

  • DIN ISO 702-4:2010-04

    Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 4: Cylindrical connection (ISO 702-4:2004)
    4/1/2010 - PDF - English - DIN
    Learn More
    €40.56

  • DIN 10:2009-12

    Squares of parallel shanks for rotating tools
    12/1/2009 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 6300:2009-04

    Devices for fixing the position of workpieces during form-modifying production processes - Denominations and their abbreviations
    4/1/2009 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 6314:2009-04

    Clamp, straight
    4/1/2009 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 6315:2009-04

    Clamp, forked
    4/1/2009 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 6316:2009-04

    Goose neck clamp
    4/1/2009 - PDF - German - DIN
    Learn More
    €32.34

  • DIN EN 1550:2008-11

    Machine-tools safety - Safety requirements for the design and construction of work holding chucks, German version EN 1550:1997+A1:2008.
    11/1/2008 - PDF - German - DIN
    Learn More
    €65.89

  • DIN EN 1550:2008-11

    Machine-tools safety - Safety requirements for the design and construction of work holding chucks (includes Amendment A1:2008)
    11/1/2008 - PDF - English - DIN
    Learn More
    €82.52

  • DIN 69063-1:2008-08

    Machine tools - Tool receiver for hollow taper shanks - Part 1: For Type A and Type C according to DIN 69893, connecting dimensions
    8/1/2008 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 16716:2008-06

    Tools for moulding - Guide bushes of steel
    6/1/2008 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 16759:2008-06

    Tools for moulding - Centring sleeves
    6/1/2008 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 16761:2008-06

    Tools for moulding - Guide pillars
    6/1/2008 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 16760-1:2008-06

    Tools for moulding - Part 1: Machined, undrilled plates
    6/1/2008 - PDF - German - DIN
    Learn More
    €59.63

  • DIN 317:2007-01

    Drill drifts for taper shanks with drift tang
    1/1/2007 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 6366:2007-01

    Clutch drive rings for shell end mill arbors
    1/1/2007 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 69895:2006-11

    Central coolant supply for HSK - Coolant pipe with threaded nut for hollow taper shanks, type A according to DIN 69893-1 and type E according to DIN 69893-5 - Dimensions
    11/1/2006 - PDF - German - DIN
    Learn More
    €45.98

  • DIN ISO 10889-8:2006-01

    Tool holders with cylindrical shank - Part 8: Type Z, accessories (ISO 10889-8:1997)
    1/1/2006 - PDF - German - DIN
    Learn More
    €52.90

  • DIN ISO 10889-8:2006-01

    Tool holders with cylindrical shank - Part 8: Type Z, accessories (ISO 10889-8:1997)
    1/1/2006 - PDF - English - DIN
    Learn More
    €66.07

  • DIN ISO 15488:2006-01

    Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions (ISO 15488:2003)
    1/1/2006 - PDF - German - DIN
    Learn More
    €65.89

  • DIN ISO 15488:2006-01

    Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions (ISO 15488:2003)
    1/1/2006 - PDF - English - DIN
    Learn More
    €82.52

  • DIN ISO 11900-3:2005-09

    Tools for pressing - Ball-lock punch retainers - Part 3: Type E, reduced for heavy duty (ISO 11900-3:2004)
    9/1/2005 - PDF - German - DIN
    Learn More
    €39.35

  • DIN ISO 11900-3:2005-09

    Tools for pressing - Ball-lock punch retainers - Part 3: Type E, reduced for heavy duty (ISO 11900-3:2004)
    9/1/2005 - PDF - English - DIN
    Learn More
    €49.16

  • DIN 69882-1:2005-06

    Tool holders with hollow taper shanks according to DIN 69893-1 - Part 1: Designation system, technical delivery conditions
    6/1/2005 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 69882-2:2005-06

    Tool holders with hollow taper shanks according to DIN 69893-1 - Part 2: Type A, milling cutters with tenon and parallel key drive - Dimensions
    6/1/2005 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 69882-3:2005-06

    Tool holders with hollow taper shanks according to DIN 69893-1 - Part 3: Type B, milling machine arbors with enlarged contact surface diameter for milling cutters with parallel key drive - Dimensions
    6/1/2005 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 69882-4:2005-06

    Tool holders with hollow taper shanks according to DIN 69893-1 - Part 4: Type C, holding fixture for parallel shanks with lateral driving surface - Dimensions
    6/1/2005 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 69882-5:2005-06

    Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D, holders for parallel shanks with inclined clamping surface - Dimensions
    6/1/2005 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 69882-6:2005-06

    Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E, clamping chuck for collets with 8° setting angle - Dimensions
    6/1/2005 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 69894:2005-03

    Safety device for correct positioning for hollow taper shanks - Type C according DIN 69893-1 and tool receiver for hollow taper shanks, type C according DIN 69063-1 - Dimensions
    3/1/2005 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 238:2005-02

    Drill chuck mounting arrangements - Taper arbors
    2/1/2005 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 6349:2005-02

    Three-jaw drill chucks - Technical delivery conditions
    2/1/2005 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 8024:2004-07

    Tool holders for internal turning, with cylindrical shank, for indexable inserts - Structure of designation
    7/1/2004 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 8025-1:2004-07

    Tool holders for internal turning with cylindrical shank, for indexable inserts - Part 1: Shapes, dimensions, calculation for corrections
    7/1/2004 - PDF - German - DIN
    Learn More
    €59.63

  • DIN 8025-4:2004-07

    Tool holders for internal turning, with cylindrical shank, for indexable inserts - Part 4: Style L
    7/1/2004 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 8025-5:2004-07

    Tool holders for internal turning, with cylindrical shank, for indexable inserts - Part 5: Style U
    7/1/2004 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 8025-6:2004-07

    Tool holders for internal turning, with cylindrical shank, for indexable inserts - Part 6: Style Q
    7/1/2004 - PDF - German - DIN
    Learn More
    €52.90

  • DIN ISO 15637-2:2004-07

    Holding fixtures of cylindrical abrasive sleeves - Part 2: Holding fixtures for stationary machines (ISO 15637-2:2002)
    7/1/2004 - PDF - German - DIN
    Learn More
    €39.35

  • DIN ISO 15637-2:2004-07

    Holding fixtures of cylindrical abrasive sleeves - Part 2: Holding fixtures for stationary machines (ISO 15637-2:2002)
    7/1/2004 - PDF - English - DIN
    Learn More
    €49.16

  • DIN ISO 15637-1:2004-07

    Holding fixtures of cylindrical abrasive sleeves - Part 1: Holding fixtures with shank for hand-held grinding machines (ISO 15637-1:2002)
    7/1/2004 - PDF - German - DIN
    Learn More
    €39.35

  • DIN ISO 15637-1:2004-07

    Holding fixtures of cylindrical abrasive sleeves - Part 1: Holding fixtures with shank for hand-held grinding machines (ISO 15637-1:2002)
    7/1/2004 - PDF - English - DIN
    Learn More
    €49.16

  • DIN ISO 239:2003-12

    Drill chuck tapers (ISO 239:1999)
    12/1/2003 - PDF - German - DIN
    Learn More
    €45.98

  • DIN ISO 239:2003-12

    Drill chuck tapers (ISO 239:1999)
    12/1/2003 - PDF - English - DIN
    Learn More
    €57.57

  • DIN ISO 10887:2003-12

    Key type three-jaw drill chucks - Specification (ISO 10887:1999)
    12/1/2003 - PDF - German - DIN
    Learn More
    €65.89

  • DIN ISO 10887:2003-12

    Key type three-jaw drill chucks - Specification (ISO 10887:1999)
    12/1/2003 - PDF - English - DIN
    Learn More
    €82.52

  • DIN ISO 10888:2003-12

    Keyless type three-jaw drill chucks - Specification (ISO 10888:1999)
    12/1/2003 - PDF - German - DIN
    Learn More
    €65.89

  • DIN ISO 10888:2003-12

    Keyless type three-jaw drill chucks - Specification (ISO 10888:1999)
    12/1/2003 - PDF - English - DIN
    Learn More
    €82.52

  • DIN 6379:2003-08

    Studs for use with tee nuts
    8/1/2003 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 6379:2003-08

    Studs for use with tee nuts
    8/1/2003 - PDF - English - DIN
    Learn More
    €49.16

  • DIN 6323:2003-08

    Slot stones, loose
    8/1/2003 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 69063-2:2003-05

    Machine tools - Tool receiver for hollow taper shanks - Part 2: For type B and type D according to DIN 69893; Connecting dimensions
    5/1/2003 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 69063-6:2003-05

    Machine tools - Tool receiver for hollow taper shanks - Part 6: For type F according to DIN 69893; Connecting dimensions
    5/1/2003 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 69893-6:2003-05

    Hollow taper shanks with flange contact surface - Part 6: Hollow taper shanks type F; Dimensions and design
    5/1/2003 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 138:2003-04

    Metal-cutting tools - Bores, keyways and driving features for tools with parallel bore and 1 in 30 taper bore
    4/1/2003 - PDF - German - DIN
    Learn More
    €59.63

  • DIN 69051-5:2002-11

    Machine tools - Ball screws - Part 5: Mounting dimensions for ball nuts
    11/1/2002 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 6326:2002-10

    Stepped setting up blocks, adjustable
    10/1/2002 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 6372:2002-10

    C-washer for jigs and fixtures
    10/1/2002 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 2207:2001-07

    Tool shanks for milling spindle noses according to DIN 2201 - Mating dimensions
    7/1/2001 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 6364:2000-12

    Reduction sleeves with external taper shank 7/24 for morse taper shank with tightening thread
    12/1/2000 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 377:2000-05

    Extensions for tools with driving square according to DIN 10
    5/1/2000 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 2249-1:2000-01

    Verification of geometrical parameters - "NOT GO" gauging members - Part 1: For holes from 1 mm up to 40 mm nominal diameter
    1/1/2000 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 2249-1:2000-01

    NOT GO gauging members with nominal diameters from 1 mm to 40 mm
    1/1/2000 - PDF - English - DIN
    Learn More
    €40.56

  • DIN 2248-1:2000-01

    Verification of geometrical parameters - "GO" gauging members - Part 1: For holes from 1 mm to 40 mmm nominal diameter
    1/1/2000 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 2248-1:2000-01

    GO gauging members with nominal diameters from 1 mm to 40 mm
    1/1/2000 - PDF - English - DIN
    Learn More
    €40.56

  • DIN 6371:1999-11

    Captive C-washer
    11/1/1999 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 6346:1997-10

    Parallels
    10/1/1997 - PDF - German - DIN
    Learn More
    €39.35

Items 1 to 200 of 349 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2