25.060 : Machine tool systems
-
NF ISO 12164-1, E62-507-1 (11/2023)
Interfaces à cône creux-face - Partie 1 : queues de type A, AB, C, CB et EB
11/1/2023 - Paper - French - AFNOR
Learn More€119.00 -
NF ISO 12164-2, E62-507-2 (11/2023)
Interfaces à cône creux-face - Partie 2 : nez de broches de type A, C et E pour queues à cône creux-face de type A, AB, C, CB et EB
11/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
NF ISO 12164-3, E62-507-3 (11/2023)
Interfaces à cône creux-face - Partie 3 : queues de type T, TA, et U
11/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
NF ISO 12164-4, E62-507-4 (11/2023)
Interfaces à cône creux-face - Partie 4 : nez de broches de type T et U pour queues de type T, TA et U
11/1/2023 - Paper - French - AFNOR
Learn More€48.00 -
NF ISO 12164-5, E62-507-5 (11/2023)
Interfaces à cône creux-face - Partie 5 : queues de type AS, CS et ES
11/1/2023 - Paper - French - AFNOR
Learn More€108.33 -
NF ISO 12164-6, E62-507-6 (11/2023)
Interfaces à cône creux-face - Partie 6 : nez de broches de type AS, CS et ES pour queues de type AS, CS et ES
11/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
PR NF ISO 5686-1, E62-517-1PR (06/2023)
Interfaces à cône polygonal avec surface de contact plane - Partie 1 : Queues de type F, H et A
6/1/2023 - Paper - English, French - AFNOR
Learn More€107.50 -
PR NF ISO 5686-2, E62-517-2PR (06/2023)
Interfaces à cône polygonal avec surface de contact plane - Partie 2 : Récepteurs d'outil de type F, H, A et X pour les queues d'outil de type F, H et A
6/1/2023 - Paper - English, French - AFNOR
Learn More€115.50 -
PR NF ISO 5686-3, E62-517-3PR (06/2023)
Interfaces à cône polygonal avec surface de contact plane - Partie 3 : Accouplement pour porte-outils entraînés avec des queues de type F et A
6/1/2023 - Paper - English, French - AFNOR
Learn More€64.50 -
NF ISO 22402-2, E62-515-2 (03/2022)
Unités de transfert de fluide pour les interfaces d'outils - Partie 2 : unités de transfert pour interfaces à cône polygonal conformes à la série ISO 26623
3/1/2022 - Paper - French - AFNOR
Learn More€48.00 -
NF ISO 22402-1, E62-515-1 (01/2022)
Unités de transfert de fluide pour les interfaces d'outils - Partie 1 : unités de transfert pour queues à cône creux-face conformes à la série ISO 12164
1/1/2022 - Paper - French - AFNOR
Learn More€75.67 -
NF ISO 3408-2, E22-202 (09/2021)
Ball screws - Part 2 : nominal diameters, leads, nut dimensions and mounting bolts - Metric series - Vis à billes - Partie 2 : Diamètres et pas hélicoïdaux, nominaux - Série métrique.
9/1/2021 - Paper - French - AFNOR
Learn More€75.67 -
NF ISO 26623-1, E62-509-1 (06/2021)
Polygonal taper interface with flange contact surface - Part 1 : dimensions and designation of shanks
6/1/2021 - Paper - French - AFNOR
Learn More€75.67 -
FD E66-000 (09/2020)
Tools - French standardization in the field of tools - Overall survey
9/1/2020 - Paper - French - AFNOR
Learn More€144.50 -
NF ISO 26622-1, E62-510-1 (09/2017)
Modular taper interface with ball track system - Part 1 : dimensions and designation of shanks
9/1/2017 - Paper - French - AFNOR
Learn More€58.62 -
NF ISO 238, E66-538 (03/2017)
Reduction sleeves and extension sockets for tools with Morse taper shanks
3/1/2017 - Paper - French - AFNOR
Learn More€46.55 -
NF ISO 4202, E62-529 (01/2017)
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
1/1/2017 - Paper - French - AFNOR
Learn More€33.62 -
€25.50
-
NF ISO 10889-3, E66-550-3 (06/2016)
Tool holders with cylindrical shank - Part 3 : Type B with rectangular radial seat
6/1/2016 - Paper - French - AFNOR
Learn More€58.62 -
NF ISO 10889-7, E66-550-7 (06/2016)
Tool holders with cylindrical shank - Part 7 : type F with taper seat
6/1/2016 - Paper - French - AFNOR
Learn More€48.00 -
NF ISO 10889-6, E66-550-6 (06/2016)
Tool holders with cylindrical shank - Part 6 : type E with cylindrical seat
6/1/2016 - Paper - French - AFNOR
Learn More€60.67 -
NF ISO 10889-4, E66-550-4 (06/2016)
Tool holders with cylindrical shank - Part 4 : type C with rectangular axial seat
6/1/2016 - Paper - French - AFNOR
Learn More€58.50 -
NF ISO 10889-5, E66-550-5 (06/2016)
Tool holders with cylindrical shank - Part 5 : type D with more than one rectangular seat
6/1/2016 - Paper - French - AFNOR
Learn More€48.00 -
NF ISO 10889-2, E66-550-2 (06/2016)
Tool holders with cylindrical shank - Part 2 : type A, shanks for tool holders of special designs
6/1/2016 - Paper - French - AFNOR
Learn More€46.55 -
NF ISO 7388-3, E62-540-3 (05/2016)
Tool shanks with 7/24 taper for automatic tool changers - Part 3 : retention knobs of forms AD, AF, UD, UF, JD and JF
5/1/2016 - Paper - French - AFNOR
Learn More€56.64 -
NF ISO 10649-3, E62-514-3 (01/2014)
Cutter arbors with parallel key and tenon drive - Part 3 : dimensions and designation of tool holders with 7/24 taper for automatic tool changer
1/1/2014 - Paper - French - AFNOR
Learn More€44.97 -
NF ISO 10649-4, E62-514-4 (01/2014)
Cutter arbors with parallel key and tenon drive - Part 4 : dimensions and designation of tool holders with 7/24 taper without automatic tool changer
1/1/2014 - Paper - French - AFNOR
Learn More€46.50 -
NF ISO 10649-5, E62-514-5 (09/2012)
Cutter arbors with parallel key and tenon drive - Part 5 : dimensions and designation of tool holders with polygonal interface with flange contact surface
9/1/2012 - Paper - French - AFNOR
Learn More€46.50 -
NF ISO 10649-6, E62-514-6 (09/2012)
Cutter arbors with parallel key and tenon drive - Part 6 : dimensions and desigantion of tool holders with modular taper interface with ball track system
9/1/2012 - Paper - French - AFNOR
Learn More€48.00 -
NF ISO 3936, E62-522 (12/2009)
Reduction sleeves with tenon drive with external and internal 7/24 taper - Dimensions - Douilles de réduction à entraînement par tenons aux cônes extérieur et intérieur 7/24
12/1/2009 - Paper - French - AFNOR
Learn More€25.67 -
NF ISO 702-1, E62-109-1 (10/2009)
Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1 : conical connection - Machines-outils
10/1/2009 - Paper - French - AFNOR
Learn More€48.00 -
NF ISO 3937-3, E62-511-3 (01/2009)
Cutter arbors with tenon drive - Part 3 : dimensions of hollow taper interface with flange contact surface
1/1/2009 - Paper - French - AFNOR
Learn More€46.55 -
NF ISO 3937-2, E62-511-2 (01/2009)
Cutter arbors with tenon drive - Part 2 : dimensions of 7/24 taper
1/1/2009 - Paper - French - AFNOR
Learn More€58.62 -
NF EN 1550+A1, E62-104 (11/2008)
Machine-tools safety - Safety requirements for the design and construction of work holding chucks - Sécurité des machines-outils
11/1/2008 - Paper - French - AFNOR
Learn More€46.50 -
NF ISO 702-2, E62-109-2 (01/2008)
Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2 : camlock type - Machines-outils
1/1/2008 - Paper - French - AFNOR
Learn More€60.50 -
NF ISO 702-3, E62-109-3 (01/2008)
Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3 : bayonet type - Machines-outils
1/1/2008 - Paper - French - AFNOR
Learn More€60.50 -
NF ISO 3442-3, E62-102-3 (03/2007)
Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3 : power operated chucks with serrated jaws - Machines-outils
3/1/2007 - Paper - French - AFNOR
Learn More€75.50 -
€75.50
-
NF ISO 3408-3, E22-201-3 (12/2006)
Ball screws - Part 3 : acceptance conditions and acceptance tests
12/1/2006 - Paper - French - AFNOR
Learn More€75.50 -
NF ISO 3408-5, E22-201-5 (11/2006)
Ball screws - Part 5 : static and dynamic axial load ratings and operational life
11/1/2006 - Paper - French - AFNOR
Learn More€75.50 -
NF ISO 3442-1, E62-102-1 (09/2006)
Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1 : manually operated chucks with tongue and groove type jaws - Machines-outils
9/1/2006 - Paper - French - AFNOR
Learn More€60.50 -
NF ISO 3442-2, E62-102-2 (09/2006)
Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2 : power operated chucks with tongue and groove type jaws - Machines-outils
9/1/2006 - Paper - French - AFNOR
Learn More€60.50 -
NF ISO 3089, E62-101 (07/2006)
Machine tools - Test conditions for self-centring, manually-operated chucks with one piece-jaws - Machines-outils
7/1/2006 - Paper - French - AFNOR
Learn More€75.50 -
NF ISO 702-4, E62-112 (08/2004)
Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 4 : cylindrical connection - Machines-outils
8/1/2004 - Paper - French - AFNOR
Learn More€48.00 -
NF ISO 839-2, E62-508-2 (09/2003)
Milling machine arbors with 7/24 tapers - Part 2 : accessories
9/1/2003 - Paper - French - AFNOR
Learn More€56.64 -
NF E62-520 (03/2003)
Tools chucks (end mill holders) wirth clamp screws for flatted cylindrical shank tools - Dimensions of chucks with 7/24 taper shank
3/1/2003 - Paper - French - AFNOR
Learn More€60.67 -
NF ISO 10889-8, E66-550-8 (09/1998) (R2004)
Tool holders with cylindrical shank. Part 8 : type Z, accessories.
9/1/1998 - Paper - French - AFNOR
Learn More€75.50 -
NF ISO 1080, E66-533 (04/1997)
Machine-tools. Morse taper shanks. Cotter slots with taper keys. - Machines-outils
4/1/1997 - Paper - French - AFNOR
Learn More€60.50 -
NF ISO 296, E66-531 (10/1996) (R2002)
Machine tools. Self-holding tapers for tool shanks. - Machines-outils
10/1/1996 - Paper - French - AFNOR
Learn More€60.50 -
NF E62-196 (09/1989) (R2010)
Machine-tools. Retriever for internal push type broaching with full ends, shape W. Part 1 : general. - Machines outils
9/1/1989 - Paper - French - AFNOR
Learn More€34.50 -
NF E62-197 (09/1989) (R2010)
Machines-tools. Pushing head type uv for internal push type broaching with tail ends, shape U or V. Part 1 : general. - Machines-outils
9/1/1989 - Paper - French - AFNOR
Learn More€34.50 -
NF E62-190 (02/1989) (R2010)
Tail end head with two catch fingers for pull broaching. Dimensions and characteristics of heads for broaching tools of diameters 4 to 50. - Têtes d'accrochage arrière à deux doigts de verrouillage pour brochage en traction
2/1/1989 - Paper - French - AFNOR
Learn More€75.67