23 : Fluid systems and components for general use
-
€54.00
-
€105.00
-
SAE J 518/2:2023-12-26
Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Screw Flange Connection - Part 2: 42 MPa (Code 62)
12/26/2023 - PDF - English - SAE
Learn More€111.00 -
SAE AS 1291B:2023-12-20
SLEEVE, HOSE ASSEMBLY, CHAFE GUARD, TFE OR FEP (Stabilized: Dec 2023)
12/20/2023 - PDF - English - SAE
Learn More€54.00 -
€47.00
-
SAE J 1754/1:2023-11-01
Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 1: Procurement Document
11/1/2023 - PDF - English - SAE
Learn More€96.00 -
€96.00
-
SAE J 343:2023-10-05
Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
10/5/2023 - PDF - English - SAE
Learn More€83.00 -
€47.00
-
€75.00
-
€60.00
-
SAE J 1926/3:2023-05-10
Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 3: Light-Duty (L-Series) Stud Ends
5/10/2023 - PDF - English - SAE
Learn More€93.00 -
SAE J 1341:2023-05-01
Test Method for Measuring Power Consumption of Hydraulic Pumps for Trucks and Buses (Stabilized: May 2023)
5/1/2023 - PDF - English - SAE
Learn More€60.00 -
€47.00
-
SAE J 846:2023-03-23
Coding Systems for Identification of Fluid Conductors and Connectors
3/23/2023 - PDF - English - SAE
Learn More€124.00 -
SAE J 518/1:2023-03-01
Hydraulic Flange Tube, Pipe, and Hose Connections Four-Screw Flange Connection - Part 1: 3.5 to 35 MPa (Code 61)
3/1/2023 - PDF - English - SAE
Learn More€109.00 -
SAE J 1926/2:2023-03-01
Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends
3/1/2023 - PDF - English - SAE
Learn More€89.00 -
SAE J 1926/1:2023-01-17
Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing
1/17/2023 - PDF - English - SAE
Learn More€87.00 -
SAE AS 85421/3D:2022-10-26
FITTING, TEE, REDUCER, BEAM SEAL, 3000/4000 PSI, 3 MALE ENDS
10/26/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 85421/4F:2022-10-26
FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN, SWIVEL NUT ON BRANCH
10/26/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 85421/5D:2022-10-26
FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN AND BRANCH, SWIVEL NUT ON RUN
10/26/2022 - PDF - English - SAE
Learn More€47.00 -
SAE J 1677:2022-09-08
Tests and Procedures for Carbon Steel and High Strength, Low Alloy Steel Tubing
9/8/2022 - PDF - English - SAE
Learn More€75.00 -
SAE J 526:2022-09-08
Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming, and Brazing
9/8/2022 - PDF - English - SAE
Learn More€66.00 -
SAE J 1065:2022-07-26
Nominal Reference Working Pressures for Steel Hydraulic Tubing
7/26/2022 - PDF - English - SAE
Learn More€93.00 -
SAE J 1502:2022-05-26
Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic
5/26/2022 - PDF - English - SAE
Learn More€75.00 -
SAE J 515:2022-05-26
Specification for O-Ring Materials Used with Hydraulic Connectors
5/26/2022 - PDF - English - SAE
Learn More€101.00 -
SAE AS 85421/2C:2022-05-09
FITTING END, STANDARD DIMENSIONS FOR, BULKHEAD, DYNAMIC BEAM SEAL, MALE
5/9/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 85421/1A:2022-05-02
FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE
5/2/2022 - PDF - English - SAE
Learn More€54.00 -
€131.00
-
SAE J 1670:2022-02-02
Type “F” Clamps for Plumbing Applications (Stabilized: Feb 2022)
2/2/2022 - PDF - English - SAE
Learn More€66.00 -
SAE J 2593:2022-01-21
Information Report for the Installation of Fluid Conductors and Connectors
1/21/2022 - PDF - English - SAE
Learn More€129.00 -
€116.00
-
€127.00
-
€109.00
-
€66.00
-
€87.00
-
SAE J 1939/74:2021-08-26
Application - Configurable Messaging (Stabilized: Aug 2021)
8/26/2021 - PDF - English - SAE
Learn More€148.00 -
SAE J 518/3:2021-08-12
Hydraulic Flange Clamps, Two-Screw Flange Connection to be Used with SAE J518-1 (Code 61) Connections Where Only Low Pressure is Required
8/12/2021 - PDF - English - SAE
Learn More€83.00 -
SAE AS 18280H:2021-05-26
Fittings, 24 Degree Cone Flareless, Fluid Connection, 3000 psi
5/26/2021 - PDF - English - SAE
Learn More€127.00 -
SAE AS 5961B:2021-04-27
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, STRAIGHT TO STRAIGHT
4/27/2021 - PDF - English - SAE
Learn More€60.00 -
SAE AS 5962B:2021-04-27
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, STRAIGHT TO 45° ELBOW
4/27/2021 - PDF - English - SAE
Learn More€60.00 -
SAE AS 5963B:2021-04-27
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, STRAIGHT TO 90° ELBOW
4/27/2021 - PDF - English - SAE
Learn More€60.00 -
€103.00
-
€54.00
-
€79.00
-
€70.00
-
SAE J 1754/2:2020-09-08
Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced -Part 2: Ordering Information
9/8/2020 - PDF - English - SAE
Learn More€83.00 -
SAE J 1754/3:2020-09-08
Hose Assemblies, Hydraulic, J517 100R Series Hose - Part 3: Procurement and Ordering Information
9/8/2020 - PDF - English - SAE
Learn More€86.00 -
€66.00
-
€131.00
-
SAE J 2435:2020-06-05
Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, Cold Forming, Welding, and Brazing
6/5/2020 - PDF - English - SAE
Learn More€79.00 -
SAE J 2467:2020-05-26
Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending, Single Flaring, Cold Forming, Welding, and Brazing
5/26/2020 - PDF - English - SAE
Learn More€70.00 -
SAE J 2551/3:2020-03-30
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement
3/30/2020 - PDF - English - SAE
Learn More€101.00 -
€93.00
-
€79.00
-
SAE J 532:2020-01-15
Automotive Straight Thread Filter and Drain Plugs (Stabilized: Jan 2020)
1/15/2020 - PDF - English - SAE
Learn More€93.00 -
€135.00
-
€47.00
-
€93.00
-
€70.00
-
SAE AS 5964B:2019-11-08
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, 45° ELBOW TO 45° ELBOW (Stabilized: Nov 2019)
11/8/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AS 5965B:2019-11-08
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, 45° ELBOW TO 90° ELBOW (Stabilized: Nov 2019)
11/8/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AS 5966B:2019-11-08
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, 90° ELBOW TO 90° ELBOW (Stabilized: Nov 2019)
11/8/2019 - PDF - English - SAE
Learn More€66.00 -
SAE J 2066:2019-10-02
Filter and Filter Element for Hydraulic System(s) Used on Manufacturing and Assembly Equipment (Stabilized: Oct 2019)
10/2/2019 - PDF - English - SAE
Learn More€96.00 -
SAE J 1227:2019-08-29
Assessing Cleanliness of Hydraulic Fluid Power Components and Systems
8/29/2019 - PDF - English - SAE
Learn More€96.00 -
SAE J 1453/1:2019-06-06
Specification for O-Ring Face Seal Connectors: Part 1 - Tube Connection Details and Common Requirements for Performance and Tests
6/6/2019 - PDF - English - SAE
Learn More€130.00 -
SAE J 2832:2019-02-27
Welded Flash Controlled, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved, Annealed for Bending, Double Flaring, Cold Forming, and Brazing
2/27/2019 - PDF - English - SAE
Learn More€75.00 -
SAE AS 4799C:2018-08-31
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO STRAIGHT FEMALE
8/31/2018 - PDF - English - SAE
Learn More€47.00 -
SAE AS 5503B:2018-08-14
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS TO FIXED CAVITY, POTABLE WATER
8/14/2018 - PDF - English - SAE
Learn More€60.00 -
SAE J 2833:2018-06-15
Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending, Flaring, Cold Forming and Brazing
6/15/2018 - PDF - English - SAE
Learn More€70.00 -
€47.00
-
SAE J 2551/1:2018-04-09
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication
4/9/2018 - PDF - English - SAE
Learn More€136.00 -
SAE J 2551/2:2018-04-09
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements
4/9/2018 - PDF - English - SAE
Learn More€105.00 -
SAE AS 85421/10D:2017-11-03
FITTING, ADAPTER, BEAM SEAL, 3000/4000 PSI, MALE TO FLARELESS
11/3/2017 - PDF - English - SAE
Learn More€47.00 -
SAE J 527:2017-10-25
Brazed Double Wall Low-Carbon Steel Tubing (Stabilized: Oct 2017)
10/25/2017 - PDF - English - SAE
Learn More€66.00 -
SAE J 2765:2017-07-10
Procedure for Measuring System COP [Coefficient of Performance] of a Mobile Air Conditioning System on a Test Bench
7/10/2017 - PDF - English - SAE
Learn More€114.00 -
SAE J 1298:2017-04-14
Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic Port Sizes and Locations (Stabilized: Apr 2017)
4/14/2017 - PDF - English - SAE
Learn More€60.00 -
SAE J 2337/2:2017-02-08
Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 2: Stud End Requirements, Dimensions, Design, and Test Methods (Stabilized: Feb 2017)
2/8/2017 - PDF - English - SAE
Learn More€98.00 -
SAE J 2337/3:2017-01-04
Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods (Stabilized: Jan 2017)
1/4/2017 - PDF - English - SAE
Learn More€86.00 -
SAE J 525:2016-09-09
Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring
9/9/2016 - PDF - English - SAE
Learn More€75.00 -
SAE J 524:2016-07-27
Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring
7/27/2016 - PDF - English - SAE
Learn More€66.00 -
€47.00
-
SAE J 1946:2016-01-26
Companion Flanges, Type A (External Pilot) and Type S (Internal Pilot) (Stabilized: Jan 2016)
1/26/2016 - PDF - English - SAE
Learn More€79.00 -
SAE J 1604:2015-12-17
Rubber Boots for Drum-Type Hydraulic Brake Wheel Cylinders
12/17/2015 - PDF - English - SAE
Learn More€66.00 -
SAE AS 603B:2015-06-30
Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies
6/30/2015 - PDF - English - SAE
Learn More€66.00 -
SAE J 1775:2015-05-12
Bleed-Air Pneumatic Systems for Gas Turbine Equipped Marine and Amphibious Craft
5/12/2015 - PDF - English - SAE
Learn More€70.00 -
SAE J 1453/2:2015-04-30
Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads
4/30/2015 - PDF - English - SAE
Learn More€151.00 -
SAE MA 4570:2015-04-28
HOSE ASSEMBLY, PTFE, ARAMID REINFORCED, STANDARD DUTY, 21 000/28 000 KPA, 135 °C, TITANIUM FITTINGS, FLARELESS, INCLUDING JUMP SIZES, STRAIGHT TO 90°, METRIC
4/28/2015 - PDF - English - SAE
Learn More€66.00 -
€60.00
-
€54.00
-
SAE J 1603:2014-12-03
Rubber Seals for Hydraulic Disc Brake Cylinders (Stabilized: Dec 2014)
12/3/2014 - PDF - English - SAE
Learn More€79.00 -
SAE J 2552:2014-06-06
Push-On Hose and Mating Hose Fittings (Stabilized: Jun 2014)
6/6/2014 - PDF - English - SAE
Learn More€119.00 -
SAE J 2337/1:2014-06-05
Connections for Fluid Power and High Pressure Use—Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing—Part 1: Ports with Recessed Conical Seat Requirements, Dimensions, Design, and Test Methods (Stabilized: Jun 2014)
6/5/2014 - PDF - English - SAE
Learn More€75.00 -
SAE J 1475:2014-06-05
Hydraulic Hose Fitting for Marine Applications (Stabilized: Jun 2014)
6/5/2014 - PDF - English - SAE
Learn More€75.00 -
SAE J 1927:2014-06-04
Cumulative Damage Analysis for Hydraulic Hose Assemblies (Stabilized: Jun 2014)
6/4/2014 - PDF - English - SAE
Learn More€89.00 -
SAE J 1776:2014-02-21
Marine Vehicles - Hydraulic System Pumps and Motors - Design and Specification Guide
2/21/2014 - PDF - English - SAE
Learn More€89.00 -
SAE J 101:2013-07-09
Hydraulic Wheel Cylinders for Automotive Drum Brakes (Stabilized: Jul 2013)
7/9/2013 - PDF - English - SAE
Learn More€89.00 -
SAE J 1783:2013-05-31
Ship Systems and Equipment - Selection of Hydraulic Directional Control Valves
5/31/2013 - PDF - English - SAE
Learn More€89.00 -
SAE J 1779:2013-05-30
Ship Systems and Equipment - Hydraulic System Design Criteria for Marine Vehicles
5/30/2013 - PDF - English - SAE
Learn More€101.00 -
SAE J 2027:2013-05-28
Standard for Protective Covers for Gasoline Fuel Line Tubing (Stabilized: May 2013)
5/28/2013 - PDF - English - SAE
Learn More€96.00 -
SAE J 1401:2013-02-05
Road Vehicle - Hydraulic Brake Hose Assemblies for Use With Nonpetroleum-Base Hydraulic Fluids
2/5/2013 - PDF - English - SAE
Learn More€109.00 -
€138.00
-
€83.00
-
SAE AS 5952B:2013-01-09
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO STRAIGHT
1/9/2013 - PDF - English - SAE
Learn More€60.00 -
SAE AS 5953C:2013-01-09
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 45°
1/9/2013 - PDF - English - SAE
Learn More€60.00 -
SAE AS 5954C:2013-01-09
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 90°
1/9/2013 - PDF - English - SAE
Learn More€60.00 -
SAE AS 5955B:2013-01-09
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 45° TO 45°
1/9/2013 - PDF - English - SAE
Learn More€60.00 -
SAE AS 5956C:2013-01-09
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 45° TO 90°
1/9/2013 - PDF - English - SAE
Learn More€60.00 -
SAE AS 5957B:2013-01-09
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 90° TO 90°
1/9/2013 - PDF - English - SAE
Learn More€60.00 -
SAE AS 18280/2A:2013-01-02
Sleeves, Internally or Externally Swaged or Welded, 24° Cone Flareless Fitting, 3000 psi
1/2/2013 - PDF - English - SAE
Learn More€60.00 -
SAE J 1137:2012-12-03
Hydraulic Valves for Motor Vehicle Brake Systems - Performance Requirements (Stabilized: Dec 2012)
12/3/2012 - PDF - English - SAE
Learn More€54.00 -
SAE J 1406:2012-07-05
Application of Hydraulic Brake Hose to Motor Vehicles - Wheel End and Axle
7/5/2012 - PDF - English - SAE
Learn More€60.00 -
SAE J 1453/3:2012-06-29
Specification for O-Ring Face Seal Connectors: Part 3 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with SAE J1926-2 Inch Stud Ends
6/29/2012 - PDF - English - SAE
Learn More€150.00 -
SAE J 1176:2012-06-01
External Leakage Classifications for Hydraulic Systems (Stabilized: Jun 2012)
6/1/2012 - PDF - English - SAE
Learn More€47.00 -
SAE J 1568:2012-04-30
Materials for Plastic Pistons for Hydraulic Disc Brake Cylinders (Stabilized: Apr 2012)
4/30/2012 - PDF - English - SAE
Learn More€54.00 -
SAE J 1694:2012-04-30
Remanufactured Hydraulic Master Cylinder for Motor Vehicle Brakes - Performance Requirements (Stabilized: Apr 2012)
4/30/2012 - PDF - English - SAE
Learn More€60.00 -
SAE J 1154:2012-02-17
Hydraulic Master Cylinders for Motor Vehicle Brakes - Performance Requirements (Stabilized: Feb 2012)
2/17/2012 - PDF - English - SAE
Learn More€60.00 -
€142.00
-
SAE J 1650:2011-12-06
Seamless Copper-Nickel 90-10 Tubing (Stabilized: Dec 2011)
12/6/2011 - PDF - English - SAE
Learn More€54.00 -
SAE J 2631:2011-10-25
Defining Hydraulic Oil Compatibility with Hydraulic Hose Elastomers (Stabilized: Oct 2011)
10/25/2011 - PDF - English - SAE
Learn More€101.00 -
€86.00
-
SAE J 1601:2011-03-16
Rubber Cups for Hydraulic Actuating Cylinders (Stabilized: Mar 2011)
3/16/2011 - PDF - English - SAE
Learn More€105.00 -
SAE J 1926/4:2010-08-05
Connector for Fluid Power and General Use—Ports and Stud End with ASME B1.1 Threads and O-Ring Seal—Part 4: External Hex and Internal Hex Inch Port Plugs—Dimensions, Design, Test Methods and Requirements
8/5/2010 - PDF - English - SAE
Learn More€93.00 -
SAE J 2890:2010-06-21
Hydraulic Fluid Power - Accelerated Method for Determining the Wear Characteristics of a Hydraulic Component Due to Contaminants
6/21/2010 - PDF - English - SAE
Learn More€98.00 -
SAE J 2044:2009-08-13
Quick Connect Coupling Specification for Liquid Fuel and Vapor/Emissions Systems
8/13/2009 - PDF - English - SAE
Learn More€114.00 -
SAE J 2470:2009-01-22
Hydraulic Fluid Power—Valves—Method for Assessing the Lock Sensitivity to Contaminants
1/22/2009 - PDF - English - SAE
Learn More€93.00 -
SAE J 2051:2005-05-25
Qualifications for Four-Way Subbase Mounted Air Valves for Automotive Manufacturing Applications
5/25/2005 - PDF - English - SAE
Learn More€111.00 -
€107.00
-
SAE J 1655:1996-08-01
PREDICTIVE AND PREVENTIVE DIAGNOSTIC MAINTENANCE OF HYDRAULIC SYSTEMS
8/1/1996 - PDF - English - SAE
Learn More€70.00 -
SAE J 1689:1994-11-01
HYDRAULIC POWER UNITS USED ON MACHINE TOOLS AND EQUIPMENT FOR THE AUTOMOTIVE INDUSTRY
11/1/1994 - PDF - English - SAE
Learn More€131.00 -
SAE J 1780:1991-04-01
HYDRAULIC SYSTEM DIAGRAMS AND ASSOCIATED TABLES FOR MARINE VEHICLES
4/1/1991 - PDF - English - SAE
Learn More€118.00