23 : Fluid systems and components for general use
-
UNE-EN ISO 11363-1:2018/A1:2024
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
4/10/2024 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 11363-1:2018/A1:2024
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
4/10/2024 - PDF - English - AENOR
Learn More€40.80 -
NBN ISO 16494-1:2022/Amd 1:2024
Heat recovery ventilators and energy recovery ventilators — Method of test for performance — Part 1: Development of metrics for evaluation of energy related performance — Amendment 1 ISO 16494-1:2022/Amd 1:2023
2/29/2024 - PDF - English - NBN
Learn More€20.00 -
UNE-EN IEC 60335-2-40:2024/A11:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
2/28/2024 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN IEC 60335-2-40:2024/A11:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
2/28/2024 - PDF - English - AENOR
Learn More€81.60 -
UNE-CEN/TS 14632:2023
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in November of 2023.)
11/3/2023 - PDF - English - AENOR
Learn More€76.00 -
NF EN IEC 60335-2-51/A11, C73-851/A11 (11/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-51 : exigences particulières pour les pompes de circulation fixes pour installations de chauffage et de distribution d'eau
11/1/2023 - Paper - French - AFNOR
Learn More€49.50 -
NF EN ISO 10524-1/A1, S95-159-1/A1 (11/2023)
Détendeurs pour l'utilisation avec les gaz médicaux - Partie 1 : détendeurs et détendeurs-débitmètres - Amendement 1
11/1/2023 - Paper - French - AFNOR
Learn More€25.67 -
NF EN 13480-4/A1, E86-700-4/A1 (11/2023)
Tuyauteries industrielles métalliques - Partie 4 : fabrication et installation
11/1/2023 - Paper - French - AFNOR
Learn More€31.00 -
NF EN 13480-4/A2, E86-700-4/A2 (11/2023)
Metallic industrial piping - Part 4 : Fabrication and installation
11/1/2023 - Paper - French - AFNOR
Learn More€31.00 -
NBN ISO 11119-3:2020/A1:2023
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners — Amendment 1 ISO 11119-3:2020/Amd 1:2023
10/3/2023 - PDF - English - NBN
Learn More€20.00 -
NF EN ISO 11114-1/A1, E29-648-1/A1 (09/2023)
Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 1 : matériaux métalliques - Amendement 1
9/1/2023 - Paper - French - AFNOR
Learn More€48.00 -
NBN ISO 11119-2:2020/A1:2023
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners — Amendment 1 ISO 11119-2:2020/Amd 1:2023
8/23/2023 - PDF - English - NBN
Learn More€20.00 -
NF EN ISO 11363-1/A1, E29-674-1/A1 (08/2023)
Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1 : spécifications - Amendement 1
8/1/2023 - Paper - French - AFNOR
Learn More€25.67 -
IEC 63086-1:2020/AMD1:2023
IEC 63086-1:2020/AMD1:2023 Amendment 1 - Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 1: General requirements
7/21/2023 - PDF - English, French - IEC
Learn More€12.00 -
UNE-EN ISO 10298:2021/A1:2023
Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets - Amendment 1 (ISO 10298:2018/Amd 1:2021)
6/7/2023 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10298:2021/A1:2023
Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets - Amendment 1 (ISO 10298:2018/Amd 1:2021)
6/7/2023 - PDF - English - AENOR
Learn More€40.80 -
UNE-CEN/TR 17924:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Guidance on hydrogen specific aspects (Endorsed by Asociación Española de Normalización in June of 2023.)
6/3/2023 - PDF - English - AENOR
Learn More€110.00 -
NF EN IEC 60335-2-40/A11, C73-840/A11 (05/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-40 : exigences particulières pour les pompes à chaleur électriques, les climatiseurs et les déshumidificateurs
5/1/2023 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 60335-2-34/A11, C73-834/A11 (05/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-34 : exigences particulières pour les motocompresseurs
5/1/2023 - Paper - French - AFNOR
Learn More€54.67 -
DIN EN 13480-3/A5:2023-04
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A5:2022
4/1/2023 - PDF - German - DIN
Learn More€79.72 -
UNE-EN 60335-2-65:2005/A2:2023
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
3/15/2023 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN 60335-2-65:2005/A2:2023
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
3/15/2023 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN 60335-2-65:2005/A12:2023
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
3/15/2023 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN 60335-2-65:2005/A12:2023
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
3/15/2023 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
1/18/2023 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
1/18/2023 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
1/18/2023 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
1/18/2023 - PDF - English - AENOR
Learn More€55.20 -
NF EN 13480-3V1/A5, E86-700-3/A5 (12/2022)
Tuyauteries industrielles métalliques - Partie 3 : conception et calcul
12/1/2022 - Paper - French - AFNOR
Learn More€78.50 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - English - AENOR
Learn More€88.80 -
UNE-CEN/TS 17152-3:2022
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme (Endorsed by Asociación Española de Normalización in January of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 13480-3:2017/A5:2022
Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€69.00 -
UNE-CEN/TR 15120:2022
Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading (Endorsed by Asociación Española de Normalización in November of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€89.00 -
UNE-CEN/TS 14541-2:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 2: Recommendations for relevant characteristics (Endorsed by Asociación Española de Normalización in July of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€65.00 -
UNE-CEN ISO/TS 23818-2:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-CEN ISO/TS 23818-3:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material (ISO/TS 23818-3:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€68.00 -
UNE-CEN ISO/TS 23818-1:2020
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 1: Polyethylene (PE) material (ISO/TS 23818-1:2020) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€95.00 -
UNE-EN ISO 21003-3:2009/A1:2022
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 21003-3:2009/A1:2022
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
9/28/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 22391-3:2010/A2:2022
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 22391-3:2010/A2:2022
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN IEC 60335-2-41:2022/A11:2022
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
9/21/2022 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN IEC 60335-2-41:2022/A11:2022
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
9/21/2022 - PDF - English - AENOR
Learn More€81.60 -
NF EN ISO 10298/A1, E29-646/A1 (09/2022)
Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la toxicité pour le choix des raccords de sortie de robinets - Amendement 1
9/1/2022 - Paper - French - AFNOR
Learn More€25.50 -
NF EN 60335-2-65/A12, C73-865/A12 (08/2022)
Household and similar electrical appliances - Safety - Part 2-65 : particular requirements for air-cleaning appliances
8/1/2022 - Paper - French - AFNOR
Learn More€54.67 -
NF EN 60335-2-65/A2, C73-865/A2 (08/2022)
Household and similar electrical appliances - Safety - Part 2-65 : particular requirements for air-cleaning appliances
8/1/2022 - Paper - French - AFNOR
Learn More€72.00 -
NBN ISO 9624:2019/A1:2022
Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions — Amendment 1 ISO 9624:2019/Amd 1:2021
6/13/2022 - PDF - English - NBN
Learn More€20.00 -
UNE-EN ISO 11439:2013/A1:2022
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1 (ISO 11439:2013/Amd 1:2021)
6/1/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 11439:2013/A1:2022
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1 (ISO 11439:2013/Amd 1:2021)
6/1/2022 - PDF - English - AENOR
Learn More€72.00 -
NF EN ISO 15874-1/A1, T54-938-1/A1 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : General - Amendment 1 : Impact test (ISO 15874-1:2013/DAM 1:2021)
6/1/2022 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 15874-2/A2, T54-938-2/A2 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : Pipes - Amendement 2 : Impact test (ISO 15874-2:2013/DAM 2:2021)
6/1/2022 - Paper - French - AFNOR
Learn More€48.00 -
UNE-CEN/TS 1555-7:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2022.)
4/1/2022 - PDF - English - AENOR
Learn More€78.00 -
NF ISO 10298/A1, E29-646/A1 (03/2022)
Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la toxicité pour le choix des raccords de sortie de robinets - AMENDEMENT 1
3/1/2022 - Paper - French - AFNOR
Learn More€25.50 -
UNE-CEN/TS 13598-3:2021
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Assessment of conformity (Endorsed by Asociación Española de Normalización in February of 2022.)
2/1/2022 - PDF - English - AENOR
Learn More€78.00 -
UNE-EN ISO 18119:2020/A1:2021
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 1 (ISO 18119:2018/Amd 1:2021)
12/29/2021 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 18119:2020/A1:2021
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 1 (ISO 18119:2018/Amd 1:2021)
12/29/2021 - PDF - English - AENOR
Learn More€55.20 -
DIN EN 13480-2/A8:2021-12
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A8:2021
12/1/2021 - PDF - German - DIN
Learn More€45.98 -
DIN EN 13480-5/A2:2021-12
Metallic industrial piping - Part 5: Inspection and testing, German version EN 13480-5:2017/A2:2021
12/1/2021 - PDF - German - DIN
Learn More€39.35 -
NF EN IEC 60335-2-41/A11, C73-841/A11 (12/2021)
Household and similar electrical appliances - Safety - Particular requirements for pumps
12/1/2021 - Paper - French - AFNOR
Learn More€88.33 -
DVS 2205-1 Beiblatt 1:2021-12
Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyethylene material group
12/1/2021 - PDF - German - DVS
Learn More€56.95 -
VdTÜV WB 399/3 Supplement:2021-11
Unlegierter Stahl C 21, Werkstoff-Nr. 1.0432 Hersteller: Stabstahl, Schmiedestück, Flansch, Ring
11/30/2021 - PDF - German - VDTUV
Learn More€25.00 -
UNE-EN ISO 16138:2007/A1:2021
Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1 (ISO 16138:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 16138:2007/A1:2021
Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1 (ISO 16138:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN ISO 21787:2007/A1:2021
Industrial valves - Globe valves of thermoplastics materials - Amendment 1 (ISO 21787:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 21787:2007/A1:2021
Industrial valves - Globe valves of thermoplastics materials - Amendment 1 (ISO 21787:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 16135:2007/A1:2021
Industrial valves - Ball valves of thermoplastics materials - Amendment 1 (ISO 16135:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 16135:2007/A1:2021
Industrial valves - Ball valves of thermoplastics materials - Amendment 1 (ISO 16135:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 16139:2007/A1:2021
Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO 16139:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 16139:2007/A1:2021
Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO 16139:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 16137:2007/A1:2021
Industrial valves - Check valves of thermoplastics materials - Amendment 1 (ISO 16137:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 16137:2007/A1:2021
Industrial valves - Check valves of thermoplastics materials - Amendment 1 (ISO 16137:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 16136:2007/A1:2021
Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO 16136:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 16136:2007/A1:2021
Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO 16136:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€68.40 -
DIN EN 13480-3/A4:2021-11
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A4:2021
11/1/2021 - PDF - German - DIN
Learn More€45.98 -
UNE-EN 13480-3:2017/A4:2021
Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in November of 2021.)
11/1/2021 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 13480-2:2017/A8:2021
Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in November of 2021.)
11/1/2021 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 13480-5:2017/A2:2021
Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in November of 2021.)
11/1/2021 - PDF - English - AENOR
Learn More€28.00 -
NF EN ISO 11439/A1, E29-733/A1 (11/2021)
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1
11/1/2021 - Paper - French - AFNOR
Learn More€60.67 -
€48.00
-
NF EN 13480-5/A2, E86-700-5/A2 (10/2021)
Metallic industrial piping - Part 5 : Inspection and testing
10/1/2021 - Paper - French - AFNOR
Learn More€31.00 -
NF EN ISO 15877-3/A2, T54-014-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3 : Fittings - Amendment 2
10/1/2021 - Paper - French - AFNOR
Learn More€75.67 -
NF EN ISO 15874-3/A2, T54-938-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : Fittings - Amendment 2 (ISO 15874-3:2013/DAM 2:2020)
10/1/2021 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 15875-3/A2, T54-943-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3 : Fittings - Amendment 2 (ISO 15875-3:2003/DAM 2:2020)
10/1/2021 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 22391-3/A2, T54-982-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : Fittings - Amendment 2
10/1/2021 - Paper - French - AFNOR
Learn More€60.67 -
NF EN ISO 15876-3/A2, T54-944-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : Fittings - Amendment 2 (ISO 15876-3:2017/DAM 2:2020)
10/1/2021 - Paper - French - AFNOR
Learn More€43.50 -
NF EN ISO 21003-3/A1, T54-952-3/A1 (10/2021)
Multilayer piping systems for hot and cold water installations inside buildings - Part 3 : Fittings - Amendment 1 (ISO 21003-3:2008/DAM 1:2020)
10/1/2021 - Paper - French - AFNOR
Learn More€48.00 -
UNE-EN ISO 15494:2019/A1:2021
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15494:2019/A1:2021
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15875-5:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 15875-5:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN ISO 15877-2:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15877-2:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15877-5:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15877-5:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
9/29/2021 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN ISO 22391-2:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 22391-2:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 22391-3:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 22391-3:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 22391-5:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
9/29/2021 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 22391-5:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
9/29/2021 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN ISO 7866:2013/A1:2021
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 1 (ISO 7866:2012/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 7866:2013/A1:2021
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 1 (ISO 7866:2012/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15875-2:2004/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 15875-2:2004/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
9/29/2021 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15876-5:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15876-5:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15875-3:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15875-3:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15876-2:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15876-2:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 23208:2020/A1:2021
Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO 23208:2017/Amd 1:2020)
9/15/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 23208:2020/A1:2021
Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO 23208:2017/Amd 1:2020)
9/15/2021 - PDF - English - AENOR
Learn More€40.80 -
NF EN 13480-3 V1/A4, E86-700-3/A4 (09/2021)
Metallic industrial piping - Part 3 : Design and calculation
9/1/2021 - Paper - French - AFNOR
Learn More€34.67 -
UNE-CEN/TS 1046:2021
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation (Endorsed by Asociación Española de Normalización in September of 2021.)
9/1/2021 - PDF - English - AENOR
Learn More€72.00 -
UNE 62422:2014/2M:2021
Construction of double skin tanks by transforming « in situ » steel tanks
7/14/2021 - PDF - Spanish - AENOR
Learn More€25.00 -
NF M88-561/A1 (07/2021)
Secondary containments of thermoplastics static tanks for above ground storage of domestic heating oils, liquid fuels for movable heating appliance and diesel fuels - Blow moulded or rotationally moulded polyethylene (PE) or metallic secondary containments - Requirements and test methods - AMENDMENT 1 - Enveloppes secondaires de réservoirs statiques en thermoplastiques destinés au stockage non enterré de fioul domestique, combustible liquide pour appareil mobile de chauffage et gazole - Enveloppes secondaires en polyéthylène (PE) moulées par soufflage ou moulées par rotation ou métalliques -
7/1/2021 - Paper - French - AFNOR
Learn More€34.67 -
NBN ISO 13253:2017/A1:2021
Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance — Amendment 1 ISO 13253:2017/Amd 1:2020
6/17/2021 - PDF - English - NBN
Learn More€20.00 -
NBN ISO 15042:2017/A1:2021
Multiple split-system air conditioners and air-to-air heat pumps — Testing and rating for performance — Amendment 1 ISO 15042:2017/Amd 1:2020
6/17/2021 - PDF - English - NBN
Learn More€20.00 -
NBN ISO 5151:2017/A1:2021
Non-ducted air conditioners and heat pumps — Testing and rating for performance — Amendment 1 ISO 5151:2017/Amd 1:2020
6/17/2021 - PDF - English - NBN
Learn More€20.00 -
NBN ISO 18326:2018/A1:2021
Non-ducted portable air-cooled air conditioners and air-to-air heat pumps having a single exhaust duct — Testing and rating for performance — Amendment 1 ISO 18326:2018/AMD 1:2021
6/8/2021 - PDF - English - NBN
Learn More€20.00 -
UNE-EN 13480-3:2017/A1:2021
Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in June of 2021.)
6/1/2021 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN ISO 13088:2013/A1:2021
Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection - Amendment 1 (ISO 13088:2011/Amd 1: 2020)
5/26/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 13088:2013/A1:2021
Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection - Amendment 1 (ISO 13088:2011/Amd 1: 2020)
5/26/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-9:2011/A1:2021
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-9:2011/A1:2021
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-10:2011/A1:2021
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-10:2011/A1:2021
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-11:2011/A1:2021
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-11:2011/A1:2021
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
DIN EN 13480-3/A1:2021-05
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A1:2021
5/1/2021 - PDF - German - DIN
Learn More€72.80 -
UNE-CEN/TS 12007-6:2021
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 6: Specific functional recommendations for unplasticized polyamide (PA-U) (Endorsed by Asociación Española de Normalización in May of 2021.)
5/1/2021 - PDF - English - AENOR
Learn More€70.00 -
NF EN ISO 11296-4/A1, P16-364-4/A1 (05/2021)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes - Amendment 1 : updated definitions, marking requirements and procedure for alternative expression of flexural test results - Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 4 : Tubage continu par tubes polymérisés sur place - AMENDEMENT 1 : Actualisation des définitions, des exigences de marquage, et de la procédure
5/1/2021 - Paper - French - AFNOR
Learn More€48.00 -
UNE-CEN/TS 17606:2021
Installation of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards (Endorsed by Asociación Española de Normalización in May of 2021.)
5/1/2021 - PDF - English - AENOR
Learn More€58.00 -
UNE-CEN/TS 17607:2021
Operation, servicing, maintenance, repair and decommissioning of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards (Endorsed by Asociación Española de Normalización in May of 2021.)
5/1/2021 - PDF - English - AENOR
Learn More€57.00 -
NF EN ISO 18119/A1, E29-755/A1 (05/2021)
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 1
5/1/2021 - Paper - French - AFNOR
Learn More€34.67 -
UNE-EN ISO 16148:2016/A1:2021
Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing - Amendment 1 (ISO 16148:2016/Amd 1:2020)
4/28/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 16148:2016/A1:2021
Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing - Amendment 1 (ISO 16148:2016/Amd 1:2020)
4/28/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-CEN/TR 1591-2:2021 IN
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
4/14/2021 - PDF - Spanish - AENOR
Learn More€84.00 -
UNE-CEN/TR 1591-2:2021 IN
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
4/14/2021 - PDF - English - AENOR
Learn More€100.80 -
UNE-EN ISO 10893-1:2011/A1:2021
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-1:2011/A1:2021
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-2:2011/A1:2021
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-2:2011/A1:2021
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-3:2011/A2:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-3:2011/A2:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-8:2011/A1:2021
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-8:2011/A1:2021
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-12:2011/A1:2021
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-12:2011/A1:2021
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE 60402-1:2019/1M:2021
Pressure regulators for gas receiving installations with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,15 bar. Part 1: Regulators with an outlet MOP up to 0,10 bar with or without a low pressure cut-off safety valve with an equivalent flow rate up to 4,8 m3 (n)/h of air
3/3/2021 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE 60402-2:2019/1M:2021
Pressure regulators for gas receiving installations with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,15 bar. Part 2: Regulators for the second family gases, with an inlet MOP between 150 and 400 mbar and an outlet MOP up to 0,15 bar, with a low pressure cut-off safety valve, a high pressure cut-off safety valve and a relief valve for excess outlet pressure and with an equivalent flow rate up to 4,8 m3 (n)/h of air.
3/3/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE 60404-1:2015/1M:2021
Gaseous fuels. Regulation pressure and/or measurement packages with a maximum operating pressure up to 5 bar. Part 1: Packages to built in, attach or place in enclosures with an equivalent nominal volume of flow up to 100 m3 (n)/h of natural gas.
3/3/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE 60404-2:2010/1M:2021
Gaseous fuels. Regulation pressure and/or measurement packages with a maximum operating pressure up to 5 bar. Part 2: Regulation packages to place in small chest built in a public way with a nominal volume of flow equivalent up to 50 m3(n)/h of natural gas.
3/3/2021 - PDF - Spanish - AENOR
Learn More€25.00 -
NF EN 13480-3 V1/A1, E86-700-3/A1 (03/2021)
Metallic industrial piping - Part 3 : design and calculation
3/1/2021 - Paper - French - AFNOR
Learn More€68.50 -
UNE-CEN/TS 1329-2:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in March of 2021.)
3/1/2021 - PDF - English - AENOR
Learn More€69.00 -
UNE 60411:2019/1M:2021
Pressure regulators for gas receiving installations with a maximum inlet operating pressure (MOPe) greater than 0,4 bar and up to 5 bar and a maximum outlet operating pressure (MOPs) up to 0,4 bar.
2/24/2021 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN ISO 10893-3:2011/A1:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
2/17/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-3:2011/A1:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
2/17/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 21809-3:2016/A1:2021
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings - Amendment 1: Introduction of mesh-backed coating systems (ISO 21809-3:2016/Amd 1:2020)
1/27/2021 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 21809-3:2016/A1:2021
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings - Amendment 1: Introduction of mesh-backed coating systems (ISO 21809-3:2016/Amd 1:2020)
1/27/2021 - PDF - English - AENOR
Learn More€63.60 -
UNE-CEN/TR 14473:2020
Transportable gas cylinders - Porous materials for acetylene cylinders (Endorsed by Asociación Española de Normalización in January of 2021.)
1/1/2021 - PDF - English - AENOR
Learn More€90.00 -
DIN EN 13480-3/A2:2020-12
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A2:2020
12/1/2020 - PDF - German - DIN
Learn More€92.62 -
DIN EN 13480-3/A3:2020-12
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A3:2020
12/1/2020 - PDF - German - DIN
Learn More€99.35 -
NF EN ISO 7866/A1, E29-743/A1 (12/2020)
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 15875-2/A2, T54-943-2/A2 (12/2020)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2 : pipes - Amendment 2
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 15876-2/A1, T54-944-2/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2 : pipes - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 15876-5/A1, T54-944-5/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5 : fitness for purpose of the system - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 15877-2/A2, T54-014-2/A2 (12/2020)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2 : pipes - Amendment 2
12/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 15877-5/A2, T54-014-5/A2 (12/2020)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5 : fitness for purpose of the system - Amendment 2
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 22391-2/A1, T54-982-2/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2 : pipes - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 22391-3/A1, T54-982-3/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : fittings - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 22391-5/A1, T54-982-5/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5 : fitness for purpose of the system - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 15875-3/A1, T54-943-3/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3 : fittings - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 15875-5/A1, T54-943-5/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5 : fitness for purpose of the system - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 15876-3/A1, T54-944-3/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : fittings - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€25.50 -
UNE-EN ISO 11118:2016/A1:2020
Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods - Amendment 1 (ISO 11118:2015/Amd 1:2019)
11/4/2020 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 11118:2016/A1:2020
Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods - Amendment 1 (ISO 11118:2015/Amd 1:2019)
11/4/2020 - PDF - English - AENOR
Learn More€63.60 -
NF EN ISO 15494/A1, T54-946/A1 (11/2020)
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 - Systèmes de canalisations en matières plastiques pour les applications industrielles - Polybutène (PB), polyéthylène (PE), polyéthylène de meilleure résistance à la température (PE-RT), polyéthylène réticulé (PE-X), polypropylène (PP) - Séries métriques pour les spécifications pour les composants
11/1/2020 - Paper - French - AFNOR
Learn More€25.50 -
UNE-EN ISO 20361:2020/A11:2020
Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019)
10/28/2020 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN ISO 20361:2020/A11:2020
Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019)
10/28/2020 - PDF - English - AENOR
Learn More€32.40 -
NBN B 21-106:2004/A2:2020
Concrete pipes and fittings, unreinforced, steel fibre and reinforced - National supplement to NBN EN 1916:2002
9/23/2020 - PDF - French - NBN
Learn More€20.00 -
NBN B 21-106:2004/A2:2020
Concrete pipes and fittings, unreinforced, steel fibre and reinforced - National supplement to NBN EN 1916:2002
9/23/2020 - PDF - Dutch - NBN
Learn More€20.00 -
NF ISO 6358-1/A1, E49-160-1/A1 (09/2020)
Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1 : general rules and test methods for steady-state flow - Amendment 1 : effective conductance
9/1/2020 - Paper - French - AFNOR
Learn More€48.00 -
UNE-CEN/TS 1519-2:2020
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€66.00 -
UNE-CEN/TS 17176-7:2020
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€71.00 -
UNE-EN 13480-3:2017/A2:2020
Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€72.00
