23 : Fluid systems and components for general use
-
BS EN ISO 10297:2024
Gas cylinders. Cylinder valves. Specification and type testing
4/12/2024 - PDF - English - BSI
Learn More€348.00 -
PAS 4443:2024
Assessment criteria: Ancillary valves, devices and components used in hydrogen gas installations. Specification
4/11/2024 - PDF - English - BSI
Learn More€168.00 -
€24.00 -
24/30488707 DC:2024
BS EN 13079 Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D
4/11/2024 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 4126-10:2024 + Redline
Tracked Changes. Safety devices for protection against excessive pressure Sizing of safety valves and bursting discs gas/liquid two-phase flow
4/10/2024 - PDF - English - BSI
Learn More€492.00 -
BS EN 12201-3:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
4/10/2024 - PDF - English - BSI
Learn More€432.00 -
BS EN ISO 4126-10:2024
Safety devices for protection against excessive pressure Sizing of safety valves and bursting discs gas/liquid two-phase flow
4/4/2024 - PDF - English - BSI
Learn More€377.00 -
BS EN ISO 22435:2024
Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
4/4/2024 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 8233:2024 + Redline
Tracked Changes. Thermoplastics valves. Torque. Test method
4/3/2024 - PDF - English - BSI
Learn More€197.00 -
BS ISO 10928:2024 + Redline
Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
4/3/2024 - PDF - English - BSI
Learn More€326.00 -
24/30483302 DC:2024
BS EN ISO 5801:2017/Amd 1 Fans - Performance testing using standardized airways. Amendment 1
4/1/2024 - PDF - English - BSI
Learn More€24.00 -
24/30490581 DC:2024
BS EN IEC 60879 AMD 1 Comfort fans and regulators for household and similar purposes - Methods for measuring performance
3/29/2024 - PDF - English - BSI
Learn More€24.00 -
24/30484766 DC:2024
BS EN 16903 Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804
3/28/2024 - PDF - English - BSI
Learn More€24.00 -
24/30488704 DC:2024
BS EN 16904 Plastics piping systems inside the building structure - Environmental product declarations. Product category rules complementary to EN 15804
3/28/2024 - PDF - English - BSI
Learn More€24.00 -
24/30457738 DC:2024
BS EN ISO 21028-1 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C
3/25/2024 - PDF - English - BSI
Learn More€24.00 -
PAS 8855:2024
Vaping products and vaping devices. Quality, safety and performance. Specification
3/25/2024 - PDF - English - BSI
Learn More€119.00 -
BS EN 12201-1:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) General
3/22/2024 - PDF - English - BSI
Learn More€382.00 -
BS ISO 16132:2024 + Redline
Tracked Changes. Ductile iron pipes and fittings. Seal coats for cement mortar linings
3/22/2024 - PDF - English - BSI
Learn More€326.00 -
BS ISO 10928:2024
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
3/22/2024 - PDF - English - BSI
Learn More€250.00 -
BS EN 12201-2:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Pipes
3/22/2024 - PDF - English - BSI
Learn More€382.00 -
BS EN 12201-4:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Valves supply
3/21/2024 - PDF - English - BSI
Learn More€326.00 -
24/30479027 DC:2024
BS ISO 13348 Fans - Tolerances, methods of conversion and technical data presentation
3/18/2024 - PDF - English - BSI
Learn More€24.00 -
€151.00 -
BS EN 1594:2024 + Redline
Tracked Changes. Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
3/15/2024 - PDF - English - BSI
Learn More€492.00 -
BS EN 12201-4:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Valves supply
3/14/2024 - PDF - English - BSI
Learn More€250.00 -
24/30443602 DC:2024
EN 1993-4-2 Eurocode 3. Design of steel structures. Part 4-2: Tanks
3/14/2024 - PDF - English - BSI
Learn More€24.00 -
BS EN 12201-2:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Pipes
3/14/2024 - PDF - English - BSI
Learn More€293.00 -
BS EN 12201-3:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
3/14/2024 - PDF - English - BSI
Learn More€331.00 -
BS EN 12201-1:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) General
3/13/2024 - PDF - English - BSI
Learn More€293.00 -
BS EN 17878-3:2024
District heating pipes. Factory made flexible pipe systems with a lower temperature profile Requirements and test methods for non bonded plastic service pipes
3/13/2024 - PDF - English - BSI
Learn More€180.00 -
BS EN 17878-2:2024
District heating pipes. Factory made flexible pipe systems with a lower temperature profile Requirements and test methods for bonded plastic service pipes
3/13/2024 - PDF - English - BSI
Learn More€180.00 -
BS ISO 16132:2024
Ductile iron pipes and fittings. Seal coats for cement mortar linings
3/12/2024 - PDF - English - BSI
Learn More€250.00 -
BS EN 1594:2024
Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
3/11/2024 - PDF - English - BSI
Learn More€377.00 -
BS EN 17878-1:2024
District heating pipes. Factory made flexible pipe systems with a lower temperature profile Classification, general requirements and test methods
3/8/2024 - PDF - English - BSI
Learn More€250.00 -
24/30476059 DC:2024
BS EN ISO 21036 Plastics piping systems for industrial applications -Unplasticized Polyamide (PA-U) - Metric series for specifications for components and system
3/7/2024 - PDF - English - BSI
Learn More€24.00 -
24/30484769 DC:2024
BS EN 1705 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
3/7/2024 - PDF - English - BSI
Learn More€24.00 -
BS EN IEC 63086-2-1:2024
Household and similar electrical air cleaning appliances. Methods for measuring the performance Particular requirements determination of particle reduction
3/5/2024 - PDF - English - BSI
Learn More€293.00 -
24/30457735 DC:2024
BS ISO 21013-2 Cryogenic vessels - Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices
2/27/2024 - PDF - English - BSI
Learn More€24.00 -
PD CEN/TR 17996:2024
Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Guidelines for Pipelines Installation
2/26/2024 - PDF - English - BSI
Learn More€348.00 -
BS ISO 4437-2:2024 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes
2/26/2024 - PDF - English - BSI
Learn More€326.00 -
BS ISO 4437-5:2024 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fitness purpose system
2/26/2024 - PDF - English - BSI
Learn More€326.00 -
BS ISO 4437-3:2024 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
2/26/2024 - PDF - English - BSI
Learn More€382.00 -
BS EN ISO 7510:2024
Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
2/22/2024 - PDF - English - BSI
Learn More€151.00 -
BS ISO 4437-2:2024
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes
2/21/2024 - PDF - English - BSI
Learn More€250.00 -
BS ISO 4437-3:2024
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
2/21/2024 - PDF - English - BSI
Learn More€293.00 -
BS ISO 4437-5:2024
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fitness purpose system
2/21/2024 - PDF - English - BSI
Learn More€250.00 -
24/30481210 DC:2024
BS EN 13476-1 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 1: General requirements performance characteristics
2/15/2024 - PDF - English - BSI
Learn More€24.00 -
24/30481213 DC:2024
BS EN 13476-2 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 2: Specifications pipes fittings with smooth internal external surface the system, Type A
2/15/2024 - PDF - English - BSI
Learn More€24.00 -
24/30481216 DC:2024
BS EN 13476-3 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 3: Specifications pipes fittings with smooth internal profiled external surface the system, Type B
2/15/2024 - PDF - English - BSI
Learn More€24.00 -
BS EN 12201-5:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fitness purpose of the system
2/14/2024 - PDF - English - BSI
Learn More€235.00 -
BS ISO 4179:2024 + Redline
Tracked Changes. Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
2/13/2024 - PDF - English - BSI
Learn More€382.00 -
€348.00 -
24/30434673 DC:2024
BS ISO 18553 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
2/12/2024 - PDF - English - BSI
Learn More€24.00 -
BS ISO 10302-1:2024 + Redline
Tracked Changes. Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Airborne measurement
2/9/2024 - PDF - English - BSI
Learn More€432.00 -
BS EN 12201-5:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fitness purpose of the system
2/7/2024 - PDF - English - BSI
Learn More€180.00 -
BS ISO 4179:2024
Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
2/7/2024 - PDF - English - BSI
Learn More€180.00 -
24/30477132 DC:2024
BS ISO 6362-6 Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Part 6. Tolerances on form dimensions for round, square, rectangular hexagonal
2/7/2024 - PDF - English - BSI
Learn More€24.00 -
BS ISO 10302-1:2024
Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Airborne measurement
2/6/2024 - PDF - English - BSI
Learn More€331.00 -
24/30464957 DC:2024
BS ISO 7368 Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities
2/1/2024 - PDF - English - BSI
Learn More€24.00 -
24/30483348 DC:2024
BS EN 12583:2022/A1 Gas Infrastructure - Compressor stations - Functional requirements
2/1/2024 - PDF - English - BSI
Learn More€24.00 -
24/30467644 DC:2024
BS EN ISO 18984 Ball valves for thermoplastics piping systems for hot and cold water installations under pressure - Types, dimensions and requirements
1/31/2024 - PDF - English - BSI
Learn More€24.00 -
€2,279.00 -
€2,279.00
-
24/30468772 DC:2024
BS ISO 11237 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids -Specification
1/30/2024 - PDF - English - BSI
Learn More€24.00 -
24/30478022 DC:2024
BS EN ISO 7866:2012/Amd 2 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing. Amendment 2
1/29/2024 - PDF - English - BSI
Learn More€24.00 -
24/30466864 DC:2024
BS ISO 5222-3 Heat recovery ventilators and energy -Testing calculating methods for seasonal performance factor Part 3: Annual sensible heating cooling of heat
1/26/2024 - PDF - English - BSI
Learn More€24.00 -
BS EN 14025:2023 + Redline
Tracked Changes. Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction
1/25/2024 - PDF - English - BSI
Learn More€454.00 -
BS ISO 6953-1:2024 + Redline
Tracked Changes. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Main characteristics to include in supplier's literature product-marking requirements
1/22/2024 - PDF - English - BSI
Learn More€235.00 -
BS ISO 6953-2:2024 + Redline
Tracked Changes. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics include in supplier’s literature
1/22/2024 - PDF - English - BSI
Learn More€432.00 -
BS EN 1854:2022+A1:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. Pressure sensing devices for gas burners and gas burning appliances
1/19/2024 - PDF - English - BSI
Learn More€348.00 -
BS EN 751-3:2022+A1:2023
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases hot water Unsintered PTFE tapes strings
1/19/2024 - PDF - English - BSI
Learn More€250.00 -
BS ISO 6953-2:2024
Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics include in supplier’s literature
1/18/2024 - PDF - English - BSI
Learn More€331.00 -
PD CEN/TR 16395:2023 + Redline
Tracked Changes. Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document
1/17/2024 - PDF - English - BSI
Learn More€235.00 -
BS ISO 6953-1:2024
Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Main characteristics to include in supplier's literature product-marking requirements
1/17/2024 - PDF - English - BSI
Learn More€180.00 -
BS ISO 21009-1:2022 + Redline
Tracked Changes. Cryogenic vessels. Static vacuum-insulated vessels Design, fabrication, inspection and tests
1/17/2024 - PDF - English - BSI
Learn More€586.00 -
BS EN 253:2019+A1:2023
District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
1/12/2024 - PDF - English - BSI
Learn More€331.00 -
€331.00 -
BS EN 88-1:2022+A1:2023
Safety and control devices for gas burners burning appliances Pressure regulators inlet pressures up to including 50 kPa
1/12/2024 - PDF - English - BSI
Learn More€348.00 -
BS EN 14025:2023
Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction
1/4/2024 - PDF - English - BSI
Learn More€348.00 -
24/30484302 DC:2024
PD 5500:2024+A1:2024. Specification for unfired pressure vessels
1/3/2024 - PDF - English - BSI
Learn More€24.00 -
24/30465254 DC:2024
ISO 11118 Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods
1/2/2024 - PDF - English - BSI
Learn More€24.00 -
22/30448508 DC:2023
BS EN 10284. Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
12/21/2023 - PDF - English - BSI
Learn More€24.00 -
23/30484963 DC:2023
Draft BS EN 10284. Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
12/21/2023 - PDF - English - BSI
Learn More€24.00 -
23/30479278 DC:2023
Draft BS EN 12900 Refrigerant compressors.Rating conditions, tolerances and presentation of performance data
12/19/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 17038-4:2023
Pumps. Methods of qualification the Energy Efficiency Index for rotodynamic pump units Testing and calculation energy efficiency index (EEI) submersible multistage
12/18/2023 - PDF - English - BSI
Learn More€293.00 -
BS EN IEC 60335-2-51:2023+A11:2023
Household and similar electrical appliances. Safety Particular requirements for stationary circulation pumps heating service water installations
12/14/2023 - PDF - English - BSI
Learn More€180.00 -
BS ISO 21360-6:2023
Vacuum technology. Standard methods for measuring vacuum-pump performance Cryogenic vacuum pumps
12/14/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN 1092-2:2023 + Redline
Tracked Changes. Flanges and their joints. Circular flanges for pipes, valves, fittings accessories, PN designated Cast iron
12/13/2023 - PDF - English - BSI
Learn More€431.00 -
BS EN 549:2019+A1:2023
Rubber materials for seals and diaphragms for gas appliances and gas equipment
12/12/2023 - PDF - English - BSI
Learn More€293.00 -
23/30439405 DC:2023
BS 6739. Instrumentation in process control systems: installation design and practice. Code of practice
12/8/2023 - PDF - English - BSI
Learn More€79.00 -
BS EN ISO 4413:2010
Hydraulic fluid power. General rules and safety requirements for systems and their components
12/7/2023 - PDF - English - BSI
Learn More€180.00 -
BS ISO 12759-1:2023
Fans. Efficiency classification for fans General requirements
12/7/2023 - PDF - English - BSI
Learn More€250.00 -
PD ISO/TS 6737:2023
Vacuum technology. Vacuum gauges. Characteristics for a stable ionisation vacuum gauge
12/7/2023 - PDF - English - BSI
Learn More€250.00 -
BS ISO 12829:2023 + Redline
Tracked Changes. Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
11/30/2023 - PDF - English - BSI
Learn More€222.00 -
BS ISO 21360-5:2023
Vacuum technology. Standard methods for measuring vacuum-pump performance Non-evaporable getter (NEG) vacuum pumps
11/30/2023 - PDF - English - BSI
Learn More€293.00 -
BS EN 1092-2:2023
Flanges and their joints. Circular flanges for pipes, valves, fittings accessories, PN designated Cast iron
11/29/2023 - PDF - English - BSI
Learn More€348.00 -
BS ISO 5119:2023
Low temperature sealing capability of elastomeric seals. Test methods
11/28/2023 - PDF - English - BSI
Learn More€250.00 -
BS ISO 12829:2023
Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
11/27/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN 19:2023 + Redline
Tracked Changes. Industrial valves. Marking of metallic valves
11/23/2023 - PDF - English - BSI
Learn More€235.00 -
€180.00 -
PD CEN/TR 16395:2023
Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document
11/21/2023 - PDF - English - BSI
Learn More€180.00 -
€293.00 -
BS ISO 16494-1:2022+A1:2023
Heat recovery ventilators and energy ventilators. Method of test for performance Development metrics evaluation related
11/20/2023 - PDF - English - BSI
Learn More€331.00 -
22/30433302 DC:2023
BS EN 805. Water supply. Requirements for systems and components outside buildings
11/16/2023 - PDF - English - BSI
Learn More€24.00 -
€43.00 -
23/30463965 DC:2023
Draft BS ISO 4376. Cycle energy requirement. Test method
11/15/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 17877:2023
Dynamic mixers and agitators. Definitions and hydraulic characterizations
11/14/2023 - PDF - English - BSI
Learn More€348.00 -
BS EN 15969-1:2022 + Redline
Tracked Changes. Tanks for transport of dangerous goods. Digital interface the data transfer between tank vehicle and with stationary facilities Protocol specification. Control, measurement event
11/10/2023 - PDF - English - BSI
Learn More€518.00 -
BS EN 17670-2:2023
Plastics piping systems for non-pressure underground conveyance of surface water. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Specification road gullies
11/8/2023 - PDF - English - BSI
Learn More€348.00 -
PD CEN/TS 1455-2:2023 + Redline
Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Assessment of conformity
11/6/2023 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 2505:2023 + Redline
Tracked Changes. Thermoplastics pipes. Longitudinal reversion. Test method and parameters
11/6/2023 - PDF - English - BSI
Learn More€197.00 -
PD CEN/TS 1566-2:2023 + Redline
Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Assessment of conformity
11/3/2023 - PDF - English - BSI
Learn More€326.00 -
23/30478862 DC:2023
BS EN 12100 Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports
11/2/2023 - PDF - English - BSI
Learn More€24.00 -
23/30478865 DC:2023
BS EN 1680 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanisms
11/2/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 17176-2:2019+A1:2022
Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Pipes
11/2/2023 - PDF - English - BSI
Learn More€293.00 -
€293.00 -
BS EN ISO 5211:2023 + Redline
Tracked Changes. Industrial valves. Part-turn actuator attachments
10/31/2023 - PDF - English - BSI
Learn More€382.00 -
BS EN ISO 2505:2023
Thermoplastics pipes. Longitudinal reversion. Test method and parameters
10/31/2023 - PDF - English - BSI
Learn More€151.00 -
BS ISO 5222-1:2023
Heat recovery ventilators and energy ventilators. Testing calculating methods for seasonal performance factor Sensible heating factors of heat (HRV)
10/26/2023 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 13479:2022 + Redline
Tracked Changes. Polyolefin pipes for the conveyance of fluids. Determination of resistance to crack propagation. Test method for slow crack growth on notched pipes
10/26/2023 - PDF - English - BSI
Learn More€326.00 -
PD CEN/TS 1455-2:2023
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Assessment of conformity
10/19/2023 - PDF - English - BSI
Learn More€250.00 -
PD CEN/TS 1566-2:2023
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Assessment of conformity
10/19/2023 - PDF - English - BSI
Learn More€250.00 -
€24.00 -
BS EN 558:2022 + Redline
Tracked Changes. Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valves
10/15/2023 - PDF - English - BSI
Learn More€454.00 -
BS EN ISO 5210:2023 + Redline
Tracked Changes. Industrial valves. Multi-turn valve actuator attachments
10/15/2023 - PDF - English - BSI
Learn More€326.00 -
BS EN 15776:2022 + Redline
Tracked Changes. Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%
10/15/2023 - PDF - English - BSI
Learn More€432.00 -
23/30468757 DC:2023
BS EN ISO 6134. Rubber hoses and hose assemblies for saturated steam. Specification
10/12/2023 - PDF - English - BSI
Learn More€24.00 -
PD CEN/TR 15120:2022 + Redline
Tracked Changes. Tanks for transport of dangerous goods. Guidance and recommendations for loading, transport and unloading
10/10/2023 - PDF - English - BSI
Learn More€454.00 -
€250.00 -
BS EN 12067-2:2022 + Redline
Tracked Changes. Safety and control devices for burners appliances burning gaseous or liquid fuels. Control functions in electronic systems Fuel/air ratio control/supervision of the type
10/5/2023 - PDF - English - BSI
Learn More€492.00 -
BS ISO 4706:2023 + Redline
Tracked Changes. Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below
10/5/2023 - PDF - English - BSI
Learn More€382.00 -
€449.00 -
€293.00 -
BS EN 12952-5:2021 + Redline
Tracked Changes. Water-tube boilers and auxiliary installations Workmanship construction of pressure parts the boiler
9/29/2023 - PDF - English - BSI
Learn More€518.00 -
BS EN 13799:2022 + Redline
Tracked Changes. LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
9/29/2023 - PDF - English - BSI
Learn More€382.00 -
BS ISO 4706:2023
Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below
9/29/2023 - PDF - English - BSI
Learn More€293.00 -
BS ISO 5352-1:2023
Hydraulic fluid power. Determination of discharge flow rate and thermal losses gas loaded accumulators Test method
9/28/2023 - PDF - English - BSI
Learn More€250.00 -
BS EN 15632-1:2022 + Redline
Tracked Changes. District heating pipes. Factory made flexible pipe systems Classification, general requirements and test methods
9/27/2023 - PDF - English - BSI
Learn More€382.00 -
PD ISO/TS 11686:2023 + Redline
Tracked Changes. Connectors for fluid power and general use. Assembly instructions for connectors with adjustable stud ends and O-ring sealing
9/21/2023 - PDF - English - BSI
Learn More€235.00 -
PD ISO/TS 11686:2023
Connectors for fluid power and general use. Assembly instructions for connectors with adjustable stud ends and O-ring sealing
9/19/2023 - PDF - English - BSI
Learn More€180.00 -
€377.00
-
€377.00
-
BS EN ISO 11114-1:2020+A1:2023
Gas cylinders. Compatibility of cylinder and valve materials with gas contents Metallic
9/15/2023 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 11623:2023 + Redline
Tracked Changes. Gas cylinders. Composite cylinders and tubes. Periodic inspection and testing
9/15/2023 - PDF - English - BSI
Learn More€432.00 -
23/30468072 DC:2023
BS EN 15266. Stainless steel pliable corrugated tubing kits for gas installation pipework with an operating pressure up to 0,2 MPa (2 bar)
9/14/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 11623:2023
Gas cylinders. Composite cylinders and tubes. Periodic inspection and testing
9/8/2023 - PDF - English - BSI
Learn More€331.00 -
BS EN IEC 63086-1:2020+A1:2023
Household and similar electrical air cleaning appliances. Methods for measuring the performance General requirements
9/7/2023 - PDF - English - BSI
Learn More€250.00 -
BS ISO 9854-2:2023
Thermoplastics pipes for the transport of fluids. Determination Charpy impact properties Test conditions various materials
9/7/2023 - PDF - English - BSI
Learn More€151.00 -
23/30458478 DC:2023
BS ISO 5222-2. Heat recovery ventilators and energy ventilators. Testing calculating methods for seasonal performance factor Part 2. Sensible cooling factors of heat
9/4/2023 - PDF - English - BSI
Learn More€24.00 -
23/30446468 DC:2023
BS ISO 21018-1 Hydraulic fluid power. Monitoring the level of particulate contamination Part 1. General principles
9/4/2023 - PDF - English - BSI
Learn More€24.00 -
23/30445240 DC:2023
BS EN ISO 14245 AMD 1. Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing
8/31/2023 - PDF - English - BSI
Learn More€24.00 -
23/30445244 DC:2023
Draft BS EN ISO 15995:2021/Amd 1. Gas cylinders. Specifications and testing of LPG cylinder valves. Manually operated
8/31/2023 - PDF - English - BSI
Learn More€24.00 -
23/30467888 DC:2023
BS ISO 17871 AMD 1. Gas cylinders. Quick-release cylinder valves. Specification and type testing
8/29/2023 - PDF - English - BSI
Learn More€24.00 -
23/30459178 DC:2023
BS EN 14620-5. Design and manufacture of site built, vertical, cylindrical, flat-bottomed tank systems for the storage refrigerated, liquefied gases with operating temperatures between 0 °C -196 Part 5. Testing, drying, purging cool-down
8/24/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 11363-1:2018+A1:2023
Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Specifications
8/23/2023 - PDF - English - BSI
Learn More€180.00 -
23/30479105 DC:2023
BS EN 10242. Threaded pipe fittings in malleable cast iron
8/21/2023 - PDF - English - BSI
Learn More€24.00 -
22/30448505 DC:2023
BS EN 10242. Threaded pipe fitting in malleable cast iron
8/17/2023 - PDF - English - BSI
Learn More€24.00 -
23/30477720 DC:2023
BS EN 14276-1 AMD 1. Pressure equipment for refrigerating systems and heat pumps Part Vessels. General requirements
8/8/2023 - PDF - English - BSI
Learn More€24.00 -
23/30477723 DC:2023
BS EN 14276-2 AMD 1. Pressure equipment for refrigerating systems and heat pumps Part 2. Piping. General requirements
8/8/2023 - PDF - English - BSI
Learn More€24.00 -
BS ISO 11119-2:2020+A1:2023
Gas cylinders. Design, construction and testing of refillable composite gas cylinders tubes Fully wrapped fibre reinforced up to 450 l with load-sharing metal liners
8/8/2023 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 10468:2023 + Redline
Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the ring creep properties under wet or dry conditions
8/7/2023 - PDF - English - BSI
Learn More€235.00 -
23/30468765 DC:2023
BS EN ISO 8028. Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification
8/4/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN IEC 60335-2-40:2023+A11:2023
Household and similar electrical appliances. Safety Particular requirements for heat pumps, air-conditioners dehumidifier
8/3/2023 - PDF - English - BSI
Learn More€449.00 -
BS EN ISO 10468:2023
Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the ring creep properties under wet or dry conditions
8/3/2023 - PDF - English - BSI
Learn More€180.00 -
BS ISO 8513:2023 + Redline
Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the initial longitudinal tensile strength
8/3/2023 - PDF - English - BSI
Learn More€235.00 -
23/30429559 DC:2023
BS EN ISO 4080. Rubber and plastics hoses and tubing, and their assemblies. Determination of permeability to gas
8/3/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 14432:2023 + Redline
Tracked Changes. Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Product discharge and air inlet valves
7/28/2023 - PDF - English - BSI
Learn More€235.00 -
BS ISO 8513:2023
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the initial longitudinal tensile strength
7/27/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN 14433:2023 + Redline
Tracked Changes. Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Foot valves
7/26/2023 - PDF - English - BSI
Learn More€235.00 -
BS ISO 11119-3:2020+A1:2023
Gas cylinders. Design, construction and testing of refillable composite gas cylinders tubes Fully wrapped fibre reinforced up to 450 l with non-load-sharing metallic or non-metallic liners without
7/26/2023 - PDF - English - BSI
Learn More€348.00 -
BS EN 14432:2023
Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Product discharge and air inlet valves
7/25/2023 - PDF - English - BSI
Learn More€180.00 -
23/30471429 DC:2023
BS EN 17339. Transportable gas cylinders. Fully wrapped carbon composite cylinders and tubes for hydrogen
7/24/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 14433:2023
Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Foot valves
7/20/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN IEC 60534-1:2023 + Redline
Tracked Changes. Industrial-process control valves Control valve terminology and general considerations
7/19/2023 - PDF - English - BSI
Learn More€235.00 -
23/30476772 DC:2023
BS EN 488-2. District heating and district cooling pipes. Bonded pipe systems for directly buried hot and cold water networks. Factory made steel valve assembly for draining and venting, polyurethane thermal insulation and a casing of polyethylene
7/18/2023 - PDF - English - BSI
Learn More€24.00 -
BS ISO 7241:2023 + Redline
Tracked Changes. Hydraulic fluid power. Dimensions and requirements of quick-action couplings
7/13/2023 - PDF - English - BSI
Learn More€382.00 -
€197.00
-
BS EN ISO 5117:2023
Automatic steam traps. Production and performance characteristic tests
7/12/2023 - PDF - English - BSI
Learn More€293.00 -
BS 5422:2023 + Redline
Tracked Changes. Thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range –40 °C to +700 °C. Method for specifying
7/12/2023 - PDF - English - BSI
Learn More€492.00 -
BS ISO 7241:2023
Hydraulic fluid power. Dimensions and requirements of quick-action couplings
7/12/2023 - PDF - English - BSI
Learn More€180.00 -
23/30476775 DC:2023
BS EN 15698-2. District heating pipes. Bonded twin pipe systems for directly buried hot water networks Factory made fitting and valve assemblies of steel service pipes polyurethane thermal insulation one casing polyethylene
7/12/2023 - PDF - English - BSI
Learn More€24.00 -
23/30476778 DC:2023
BS EN 15698-1. District heating pipes. Bonded twin pipe systems for directly buried hot water networks Factory made assembly of steel service pipes, polyurethane thermal insulation and one casing polyethylene
7/12/2023 - PDF - English - BSI
Learn More€24.00 -
BS 5422:2023 ExComm
Expert Commentary for BS 5422:2023. Methods for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40 °C to +700 °C
7/7/2023 - PDF - English - BSI
Learn More€96.00 -
BS EN IEC 60534-1:2023
Industrial-process control valves Control valve terminology and general considerations
7/7/2023 - PDF - English - BSI
Learn More€180.00 -
€151.00 -
BS EN 12449:2023 + Redline
Tracked Changes. Copper and copper alloys. Seamless, round tubes for general purposes
7/7/2023 - PDF - English - BSI
Learn More€454.00 -
BS EN 17821:2023
Building valves. Frost resistant taps for outdoor use (FRT). General technical specification
7/6/2023 - PDF - English - BSI
Learn More€250.00 -
23/30476769 DC:2023
BS EN 488-1. District heating pipes. Bonded single pipe systems for directly buried hot water networks Part 1. Factory made steel valve assembly service pipes, polyurethane thermal insulation and a casing of polyethylene
7/6/2023 - PDF - English - BSI
Learn More€24.00 -
23/30476766 DC:2023
BS EN 448. District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
7/6/2023 - PDF - English - BSI
Learn More€24.00 -
23/30476488 DC:2023
BS EN 16631. LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Reconditioning requirements
7/6/2023 - PDF - English - BSI
Learn More€24.00 -
PD CEN/TS 14632:2023 + Redline
Tracked Changes. Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
7/5/2023 - PDF - English - BSI
Learn More€382.00 -
23/30447561 DC:2023
BS EN IEC 63086-2-2. Household and similar electrical air cleaning appliances. Method for measuring performance Part 2-2. Particular requirements determination of chemical gas reduction
7/5/2023 - PDF - English - BSI
Learn More€24.00 -
PD ISO/TS 16422-3:2023
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Fittings
7/5/2023 - PDF - English - BSI
Learn More€250.00 -
BS 5422:2023
Thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range –40 °C to +700 °C. Method for specifying
6/30/2023 - PDF - English - BSI
Learn More€377.00 -
PD CEN/TS 14632:2023
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
6/30/2023 - PDF - English - BSI
Learn More€293.00 -
BS EN 12449:2023
Copper and copper alloys. Seamless, round tubes for general purposes
6/30/2023 - PDF - English - BSI
Learn More€348.00 -
BS ISO 9854-1:2023
Thermoplastics pipes for the transport of fluids. Determination Charpy impact properties General test method
6/30/2023 - PDF - English - BSI
Learn More€180.00 -
PD IEC PAS 63086-3-1:2023
Household and similar electrical air cleaning appliances. Methods for measuring the performance Method assessing reduction rate of key bioaerosols by portable cleaners using an aerobiology test chamber
6/26/2023 - PDF - English - BSI
Learn More€250.00 -
23/30476020 DC:2023
BS ISO 4437-2.2. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Part 2. Pipes
6/26/2023 - PDF - English - BSI
Learn More€24.00 -
23/30476022 DC:2023
BS ISO 4437-5.2. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Part 5. Fitness purpose system
6/26/2023 - PDF - English - BSI
Learn More€24.00
