23.160 : Vacuum technology
-
BS ISO 21360-6:2023
Vacuum technology. Standard methods for measuring vacuum-pump performance Cryogenic vacuum pumps
12/14/2023 - PDF - English - BSI
Learn More€180.00 -
PD ISO/TS 6737:2023
Vacuum technology. Vacuum gauges. Characteristics for a stable ionisation vacuum gauge
12/7/2023 - PDF - English - BSI
Learn More€250.00 -
BS ISO 21360-5:2023
Vacuum technology. Standard methods for measuring vacuum-pump performance Non-evaporable getter (NEG) vacuum pumps
11/30/2023 - PDF - English - BSI
Learn More€293.00 -
DIN 28430:2023-09
Vacuum technology - Rules for the measurement of steam jet vacuum pumps and steam jet compressors - Motive fluid: steam
9/1/2023 - PDF - German - DIN
Learn More€72.80 -
22/30449834 DC:2022
BS ISO 21360-6. Vacuum technology. Standard methods for measuring vacuum-pump performance Part 6. Cryo vacuum pumps
12/5/2022 - PDF - English - BSI
Learn More€24.00 -
22/30449831 DC:2022
BS ISO 21360-5. Vacuum technology. Standard methods for measuring vacuum-pump performance Part 5. NEG vacuum pumps
10/31/2022 - PDF - English - BSI
Learn More€24.00 -
BS ISO 24477:2022
Vacuum technology.Vacuum gauges.Specifications, calibration and measurement uncertainties for spinning rotor gauges
8/20/2022 - PDF - English - BSI
Learn More€180.00 -
€65.89
-
ASTM E834-21
Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
4/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM E834-21 + Redline
Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
4/1/2021 - PDF - English - ASTM
Learn More€61.00 -
BS ISO 2861:2020 + Redline
Tracked Changes. Vacuum technology. Dimensions of clamped-type quick-release couplings
11/12/2020 - PDF - English - BSI
Learn More€197.00 -
BS ISO 9803-1:2020 + Redline
Tracked Changes. Vacuum technology. Mounting dimensions of pipeline fittings Non knife-edge flange type
11/12/2020 - PDF - English - BSI
Learn More€197.00 -
BS ISO 9803-2:2020 + Redline
Tracked Changes. Vacuum technology. Mounting dimensions of pipeline fittings Knife-edge flange type
11/12/2020 - PDF - English - BSI
Learn More€197.00 -
BS ISO 21358:2020 + Redline
Tracked Changes. Vacuum technology. Right-angle valve. Dimensions and interfaces for pneumatic actuator
11/12/2020 - PDF - English - BSI
Learn More€197.00 -
BS ISO 21360-1:2020
Vacuum technology. Standard methods for measuring vacuum-pump performance General description
6/17/2020 - PDF - English - BSI
Learn More€293.00 -
BS ISO 21360-2:2020
Vacuum technology. Standard methods for measuring vacuum-pump performance Positive displacement vacuum pumps
6/17/2020 - PDF - English - BSI
Learn More€250.00 -
€180.00
-
€180.00
-
BS ISO 2861:2020
Vacuum technology. Dimensions of clamped-type quick-release couplings
2/21/2020 - PDF - English - BSI
Learn More€151.00 -
BS ISO 21358:2020
Vacuum technology. Right-angle valve. Dimensions and interfaces for pneumatic actuator
2/3/2020 - PDF - English - BSI
Learn More€151.00 -
BS ISO 9803-2:2020
Vacuum technology. Mounting dimensions of pipeline fittings Knife-edge flange type
1/21/2020 - PDF - English - BSI
Learn More€151.00 -
€180.00
-
BS ISO 9803-1:2020
Vacuum technology. Mounting dimensions of pipeline fittings Non knife-edge flange type
1/16/2020 - PDF - English - BSI
Learn More€151.00 -
€180.00
-
NF ISO 21360-3, X10-510-3 (06/2019)
Vacuum technology - Standard methods for measuring vacuum pump performance - Part 3 : specific parameters for mechanical booster vacuum pumps
6/1/2019 - Paper - French - AFNOR
Learn More€75.50 -
BS ISO 20146:2019
Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
3/12/2019 - PDF - English - BSI
Learn More€250.00 -
DIN 28431:2019-03
Vacuum technology - acceptance specifications for liquid ring vacuum pumps
3/1/2019 - PDF - German - DIN
Learn More€72.80 -
BS ISO 21360-3:2019
Vacuum technology. Standard methods for measuring vacuum pump performance Specific parameters mechanical booster pumps
2/1/2019 - PDF - English - BSI
Learn More€250.00 -
€110.00
-
€110.00
-
ISO 21360-3:2019
Vacuum technology
Standard methods for measuring vacuum pump performance
1/30/2019 - Paper - French - ISO
Learn More€110.00 -
ISO 21360-3:2019
Vacuum technology
Standard methods for measuring vacuum pump performance
1/30/2019 - Paper - English - ISO
Learn More€110.00 -
NF ISO 21360-4, X10-510-4 (11/2018)
Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 4 : Turbomolecular vacuum pumps
11/1/2018 - Paper - French - AFNOR
Learn More€60.50 -
BS ISO 21360-4:2018
Vacuum technology. Standard methods for measuring vacuum-pump performance Turbomolecular vacuum pumps
8/23/2018 - PDF - English - BSI
Learn More€180.00 -
ISO 21360-4:2018 (R2024)
Vacuum technology
Standard methods for measuring vacuum-pump performance
7/31/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 21360-4:2018 (R2024)
Vacuum technology
Standard methods for measuring vacuum-pump performance
7/31/2018 - Paper - English - ISO
Learn More€72.00 -
PD ISO/TS 20177:2018
Vacuum technology. Vacuum gauges. Procedures to measure and report outgassing rates
6/13/2018 - PDF - English - BSI
Learn More€331.00 -
€199.00
-
PD ISO/TS 20175:2018
Vacuum technology. Vacuum gauges. Characterization of quadrupole mass spectrometers for partial pressure measurement
5/8/2018 - PDF - English - BSI
Learn More€250.00 -
€148.00
-
BS ISO 19685:2017
Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for Pirani gauges
9/27/2017 - PDF - English - BSI
Learn More€180.00 -
€110.00
-
DIN ISO 21360-1:2016-09
Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description (ISO 21360-1:2012)
9/1/2016 - PDF - German - DIN
Learn More€99.35 -
DIN ISO 21360-1:2016-09
Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description (ISO 21360-1:2012)
9/1/2016 - PDF - English - DIN
Learn More€124.21 -
GB/T 32218-2015
Vacuum technology―Test methods for leak rates of vacuum system (English Version)
12/10/2015 - PDF - English - CODCHI
Learn More€264.00 -
GB/T 32221-2015
Vacuum technology—Vacuum thermal environmental simulation test equipment of spacecraft—General specification (English Version)
12/10/2015 - PDF - English - CODCHI
Learn More€341.00 -
JIS B 8329-1:2015
Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description
11/20/2015 - PDF - Japanese - JSA
Learn More€41.86 -
JIS B 8329-2:2015
Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 2: Positive displacement vacuum pumps
11/20/2015 - PDF - Japanese - JSA
Learn More€25.00 -
DIN ISO 3567:2015-05
Vacuum gauges - Calibration by direct comparison with a reference gauge (ISO 3567:2011)
5/1/2015 - PDF - German - DIN
Learn More€72.80 -
DIN ISO 3567:2015-05
Vacuum gauges - Calibration by direct comparison with a reference gauge (ISO 3567:2011)
5/1/2015 - PDF - English - DIN
Learn More€91.12 -
ASTM E595-15(2021)
Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
5/1/2015 - PDF - English - ASTM
Learn More€51.00 -
ASTM E595-15(2021) + Redline
Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
1/1/2015 - PDF - English - ASTM
Learn More€61.00 -
DIN 28429:2014-05
Vacuum technology - Acceptance specifications for ion getter pumps
5/1/2014 - PDF - German - DIN
Learn More€59.63 -
BS ISO 3529-3:2014
Vacuum technology. Vocabulary Total and partial pressure vacuum gauges
4/30/2014 - PDF - English - BSI
Learn More€180.00 -
€72.00
-
DIN EN 1012-3:2014-04
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors, German version EN 1012-3:2013
4/1/2014 - PDF - German - DIN
Learn More€201.96 -
DIN EN 1012-3:2014-04
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
4/1/2014 - PDF - English - DIN
Learn More€252.71 -
NBN EN 1012-3:2014
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
1/31/2014 - PDF - French - NBN
Learn More€205.00 -
NBN EN 1012-3:2014
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
1/31/2014 - PDF - German - NBN
Learn More€205.00 -
NBN EN 1012-3:2014
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
1/31/2014 - PDF - English - NBN
Learn More€205.00 -
JIS Z 8129:2014
Vacuum technology - Vacuum gauges - Specifications for hot cathode ionization gauges
1/20/2014 - PDF - Japanese - JSA
Learn More€41.86 -
NF EN 1012-3, E51-290-3 (01/2014)
Compressors and vaccum pumps - Safety requirements - Part 3 : process compressors - Compresseurs et pompes à vide
1/1/2014 - Paper - French - AFNOR
Learn More€185.50 -
UNE-EN 1012-3:2013 (R2019)
Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors (Endorsed by AENOR in January of 2014.)
1/1/2014 - PDF - English - AENOR
Learn More€137.00 -
BS EN 1012-3:2013
Compressors and vacuum pumps. Safety requirements Process compressors
11/30/2013 - PDF - English - BSI
Learn More€398.00 -
€0.00
-
DIN 28400-3:2013-06
Vacuum technology - Terms and definitions - Part 3: Vacuum gauges
6/1/2013 - PDF - German - DIN
Learn More€72.80 -
NF ISO 3567, X10-524 (06/2013)
Vacuum gauges - Calibration by direct comparison with a reference gauge - Manomètres
6/1/2013 - Paper - French - AFNOR
Learn More€75.50 -
NF ISO 27893, X10-525 (06/2013)
Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge - Technique du vide
6/1/2013 - Paper - French - AFNOR
Learn More€75.50 -
BS ISO 14291:2012
Vacuum gauges. Definitions and specifications for quadrupole mass spectrometers
8/31/2012 - PDF - English - BSI
Learn More€250.00 -
ISO 14291:2012 (R2023)
Vacuum gauges
Definitions and specifications for quadrupole mass spectrometers
7/6/2012 - Paper - English - ISO
Learn More€110.00 -
BS ISO 3567:2011
Vacuum gauges. Calibration by direct comparison with a reference gauge
1/31/2012 - PDF - English - BSI
Learn More€250.00 -
ISO 3567:2011
Vacuum gauges
Calibration by direct comparison with a reference gauge
12/9/2011 - Paper - French - ISO
Learn More€110.00 -
ISO 3567:2011
Vacuum gauges
Calibration by direct comparison with a reference gauge
12/9/2011 - Paper - English - ISO
Learn More€110.00 -
DIN EN 1012-2:2011-12
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
12/1/2011 - PDF - English - DIN
Learn More€124.21 -
DIN EN 1012-2:2011-12
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps, German version EN 1012-2:1996+A1:2009
12/1/2011 - PDF - German - DIN
Learn More€99.35 -
BS ISO 27893:2011
Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
8/31/2011 - PDF - English - BSI
Learn More€250.00 -
€110.00
-
€110.00
-
UNE-EN 1012-1:2011
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
3/16/2011 - PDF - Spanish - AENOR
Learn More€82.00 -
UNE-EN 1012-1:2011
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
3/16/2011 - PDF - English - AENOR
Learn More€98.40 -
DIN EN 1012-1:2011-02
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors, German version EN 1012-1:2010
2/1/2011 - PDF - German - DIN
Learn More€110.00 -
DIN EN 1012-1:2011-02
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
2/1/2011 - PDF - English - DIN
Learn More€137.85 -
GB/T 16709.1-2010
Vacuum technology - Mounting dimensions of pipeline fittings - Part 1: Non knife-edge flange type (English Version)
12/23/2010 - PDF - English - CODCHI
Learn More€110.00 -
GB/T 16709.2-2010
Vacuum technology- Mounting dimensions of pipeline fittings Part 2: Knife-edge flange type (English Version)
12/23/2010 - PDF - English - CODCHI
Learn More€110.00 -
NF EN 1012-1, E51-290-1 (12/2010)
Compressors and vacuum pumps - Safety requirements - Part 1 : air compressors - Compresseurs et pompes à vide
12/1/2010 - Paper - French - AFNOR
Learn More€99.33 -
BS EN 1012-1:2010
Compressors and vacuum pumps. Safety requirements Air compressors
10/31/2010 - PDF - English - BSI
Learn More€293.00 -
NBN EN 1012-1:2010
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
10/29/2010 - PDF - French - NBN
Learn More€163.00 -
NBN EN 1012-1:2010
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
10/29/2010 - PDF - German - NBN
Learn More€163.00 -
NBN EN 1012-1:2010
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
10/29/2010 - PDF - English - NBN
Learn More€163.00 -
BS ISO 27894:2009
Vacuum technology. Vacuum gauges. Specifications for hot cathode ionization gauges
3/31/2010 - PDF - English - BSI
Learn More€250.00 -
BS ISO 27892:2010
Vacuum technology. Turbomolecular pumps. Measurement of rapid shutdown torque
2/28/2010 - PDF - English - BSI
Learn More€250.00 -
UNE-EN 1012-2:1996+A1:2010 (R2019)
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
2/17/2010 - PDF - Spanish - AENOR
Learn More€73.00 -
UNE-EN 1012-2:1996+A1:2010 (R2019)
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
2/17/2010 - PDF - English - AENOR
Learn More€87.60 -
€180.00
-
€110.00
-
€110.00
-
ASTM E2734/E2734M-10(2018)
Standard Specification for Dimensions of Knife-Edge Flanges
1/1/2010 - PDF - English - ASTM
Learn More€46.00 -
ASTM E2734/E2734M-10(2018) + Redline
Standard Specification for Dimensions of Knife-Edge Flanges
1/1/2010 - PDF - English - ASTM
Learn More€53.00 -
BS EN 1012-2:1996+A1:2009
Compressors and vacuum pumps. Safety requirements Vacuum pumps
12/31/2009 - PDF - English - BSI
Learn More€293.00 -
NF EN 1012-2/IN1, E51-290-2/IN1 (12/2009)
Compressors and vacuum pumps - Safety requirements - Part 2 : vacuum pumps - Compresseurs et pompes à vide
12/1/2009 - Paper - French - AFNOR
Learn More€23.00 -
NF EN 1012-2+A1, E51-290-2 (12/2009)
Compressors and vacuum pumps - Safety requirements - Part 2 : Vacuum pumps - Compresseurs et pompes à vide
12/1/2009 - Paper - French - AFNOR
Learn More€86.67 -
€148.00
-
€72.00
-
NBN EN 1012-2+A1:2010
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
11/20/2009 - PDF - French - NBN
Learn More€142.00 -
NBN EN 1012-2+A1:2010
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
11/20/2009 - PDF - German - NBN
Learn More€142.00 -
NBN EN 1012-2+A1:2010
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
11/20/2009 - PDF - English - NBN
Learn More€142.00 -
JIS B 8328:2009 (R2014)
Vacuum technology - Turbomolecular pumps - Measurement of performance characteristics
9/24/2009 - PDF - Japanese - JSA
Learn More€25.00 -
€25.00
-
DIN EN ISO 2151:2009-01
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2) (ISO 2151:2004), German version EN ISO 2151:2008.
1/1/2009 - PDF - German - DIN
Learn More€99.35 -
DIN EN ISO 2151:2009-01
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2) (ISO 2151:2004)
1/1/2009 - PDF - English - DIN
Learn More€124.21 -
€1,221.00
-
ASTM D4991-07(2023)
Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
1/1/2007 - PDF - English - ASTM
Learn More€48.00 -
ASTM D4991-07(2023) + Redline
Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
1/1/2007 - PDF - English - ASTM
Learn More€57.00 -
ASTM F2647-07(2023)
Standard Guide for Approved Methods of Installing a CVS (Central Vacuum System)
1/1/2007 - PDF - English - ASTM
Learn More€54.00 -
ASTM F2647-07(2023) + Redline
Standard Guide for Approved Methods of Installing a CVS (Central Vacuum System)
1/1/2007 - PDF - English - ASTM
Learn More€65.00 -
€36.27
-
JIS B 2293:2000 (R2014)
Vacuum technology - Pipeline fittings - Mounting dimensions
3/20/2000 - PDF - Japanese - JSA
Learn More€25.00 -
€25.00
-
JIS B 8317-1:1999 (R2013)
Vapour vacuum pumps - Measurement of performance characteristics - Part 1: Measurement of volume rate of flow (pumping speed)
3/20/1999 - PDF - Japanese - JSA
Learn More€32.50 -
JIS B 8317-2:1999 (R2013)
Vapour vacuum pumps - Measurement of performance characteristics - Part 2: Measurement of critical backing pressure
3/20/1999 - PDF - Japanese - JSA
Learn More€32.50 -
JIS Z 8754:1999 (R2014)
Vacuum technology - Mass-spectrometer-type leak-detector calibration
2/20/1999 - PDF - Japanese - JSA
Learn More€25.00 -
€25.00
-
JIS Z 8126-2:1999 (R2014)
Vacuum technology - Vocabulary - Part 2: Vacuum pumps and related terms
2/20/1999 - PDF - Japanese - JSA
Learn More€32.50 -
DIN 28400-8:1997-11
Vacuum technology - Terms and definitions - Part 8: Vacuum systems, components and accessories
11/1/1997 - PDF - German - DIN
Learn More€45.98 -
JIS Z 8751:1994 (R2014)
Reading methods of the vacuum gauges by means of the head difference in the hydrostatic pressure
3/1/1994 - PDF - Japanese - JSA
Learn More€25.00 -
ISO 1608-1:1993 (R2022)
Vapour vacuum pumps
Measurement of performance characteristics
11/25/1993 - Paper - French - ISO
Learn More€48.00 -
ISO 1608-1:1993 (R2022)
Vapour vacuum pumps
Measurement of performance characteristics
11/25/1993 - Paper - English - ISO
Learn More€48.00 -
DIN 28400-1:1990-05
Vacuum technology; terms and definitions; general terms
5/1/1990 - PDF - English, French, German - DIN
Learn More€52.90 -
ISO 1608-2:1989
Vapour vacuum pumps
Measurement of performance characteristics
11/30/1989 - Paper - French - ISO
Learn More€48.00 -
ISO 1608-2:1989
Vapour vacuum pumps
Measurement of performance characteristics
11/30/1989 - Paper - English - ISO
Learn More€48.00 -
JIS Z 8752:1989 (R2014)
Measuring methods of low pressures by hot cathode and cold cathode ionization gauges
3/1/1989 - PDF - Japanese - JSA
Learn More€25.00 -
JIS Z 8753:1989 (R2014)
Measuring methods of low pressures by thermal conductivity gauge
3/1/1989 - PDF - Japanese - JSA
Learn More€25.00 -
€25.00
-
€45.98
-
€57.57
-
DIN 28403:1986-09
Vacuum technology; quick release couplings; clamped type couplings
9/1/1986 - PDF - German - DIN
Learn More€32.34 -
DIN 28403:1986-09
Vacuum technology; quick release couplings; clamped type couplings
9/1/1986 - PDF - English - DIN
Learn More€40.56 -
DIN 28427:1983-02
Vacuum technology, acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid <1 mbar
2/1/1983 - PDF - German - DIN
Learn More€52.90 -
DIN 28400 Beiblatt 1:1982-10
Vacuum technology, terms and definitions, alphabetical index
10/1/1982 - PDF - German - DIN
Learn More€85.79 -
€22.99
-
DIN 28400-5:1981-03
Vacuum technology, terms and definitions, vacuum drying and lyophilisation
3/1/1981 - PDF - German - DIN
Learn More€45.98 -
€65.89
-
DIN 28400-6:1980-10
Vacuum technology, terms and definitions, surface analysis techniques
10/1/1980 - PDF - German - DIN
Learn More€45.98 -
ISO 3530:1979 (R2021)
Vacuum technology
Mass-spectrometer-type leak-detector calibration
9/1/1979 - Paper - French - ISO
Learn More€72.00 -
ISO 3530:1979 (R2021)
Vacuum technology
Mass-spectrometer-type leak-detector calibration
9/1/1979 - Paper - English - ISO
Learn More€72.00 -
DIN 28400-7:1978-07
Vakuum technology, terms and definitions, vacuum metallurgie
7/1/1978 - PDF - German - DIN
Learn More€39.35 -
€22.99
-
Adjunct to E595 Test Method for Total Mass Loss and Collected Volatile
Condensable Materials from Outgassing in a Vacuum Environment
3/28/2024 - Paper - English - ASTM
Learn More€110.66