23.100 : Fluid power systems
-
PR NF ISO 7368, E48-430PR (03/2024)
Transmissions hydrauliques - Distributeurs à cartouche, à bride, à deux orifices - Logements
3/1/2024 - Paper - English, French -
Learn More€115.50 -
NF ISO 6953-2, E49-330-2 (01/2024)
Transmissions pneumatiques - Régulateurs de pression et filtres régulateurs pour air comprimé - Partie 2 : méthodes d'essai pour déterminer les principales caractéristiques à inclure dans la documentation des fournisseurs
1/1/2024 - Paper - French -
Learn More€108.33 -
NF ISO 6953-1, E49-330-1 (01/2024)
Transmissions pneumatiques - Régulateurs de pression et filtresrégulateurs pour air comprimé - Partie 1 : principales caractéristiques à inclure dans la documentation des fournisseurs et exigences de marquage du produit
1/1/2024 - Paper - French -
Learn More€75.67 -
NF ISO 5119, E48-570 (12/2023)
Capacité d'étanchéité à basse température des joints en élastomère - Méthodes d'essai
12/1/2023 - Paper - French -
Learn More€75.67 -
NF EN 17877, E44-601 (11/2023)
Mélangeurs et agitateurs dynamiques - Définitions et caractéristiques hydrauliques
11/1/2023 - Paper - French -
Learn More€119.00 -
NF ISO 5352-1, E48-154-1 (10/2023)
Transmissions hydrauliques - Détermination du débit de décharge et des pertes thermiques des accumulateurs hydropneumatiques - Partie 1 : méthode d'essai
10/1/2023 - Paper - French -
Learn More€75.67 -
NF ISO 7241, E48-058 (08/2023)
Transmissions hydrauliques - Dimensions et exigences des raccords rapides
8/1/2023 - Paper - French -
Learn More€60.67 -
NF ISO 16028, E48-056 (06/2023)
Transmissions hydrauliques - Dimensions et exigences des raccords rapides de type à face plane
6/1/2023 - Paper - French -
Learn More€48.00 -
PR NF ISO 11619, E49-100PR (04/2023)
Transmissions pneumatiques - Tubes en polyuréthane et en polyamide destinés à être utilisés principalement dans des installations pneumatiques - Dimensions et spécifications
4/1/2023 - Paper - English, French -
Learn More€80.50 -
NF ISO 12238, E49-095 (03/2023)
Transmissions pneumatiques - Distributeurs de commande directionnels - Mesure du temps de basculement
3/1/2023 - Paper - French -
Learn More€75.67 -
NF ISO 11500, E48-658 (02/2023)
Transmissions hydrauliques - Détermination du niveau de pollution particulaire d'un échantillon liquide par comptage automatique des particules par absorption de lumière
2/1/2023 - Paper - French -
Learn More€86.67 -
PR NF EN IEC 63458-3, C73-458-3PR (01/2023)
Machines à jet d'eau à haute pression - Sécurité - Partie 3 : Dispositif pulvérisateur à haute pression
1/1/2023 - Paper - English, French -
Learn More€97.50 -
PR NF EN IEC 63458-1, C73-458-1PR (01/2023)
Machines à jet d'eau à haute pression - Sécurité - Partie 1 : Unité à jet d'eau à haute pression
1/1/2023 - Paper - English, French -
Learn More€107.50 -
PR NF EN IEC 63458-2, C73-458-2PR (01/2023)
Machines à jet d'eau à haute pression - Sécurité - Partie 2 : Flexibles, tuyauteries flexibles et connecteurs à haute pression
1/1/2023 - Paper - English, French -
Learn More€64.50 -
NF ISO 12151-2, E48-079-2 (12/2022)
Raccordements pour transmissions hydrauliques et applications générales - Flexibles de raccordement - Partie 2 : Flexibles avec embouts à cône à 24 degrés et joints toriques conformes à l'ISO 8434-1
12/1/2022 - Paper - French -
Learn More€75.67 -
NF ISO 4405, E48-652 (11/2022)
Transmissions hydrauliques - Pollution des fluides - Détermination de la pollution particulaire par la méthode gravimétrique
11/1/2022 - Paper - French -
Learn More€75.67 -
NF EN ISO 1179-2, E49-051-2 (11/2022)
Raccordements pour applications générales et transmissions hydrauliques et pneumatiques - Orifices et éléments mâles à filetage ISO 228-1 à joint en élastomère ou étanchéité métal sur métal - Partie 2 : éléments mâles de séries légère (série L) et lourde (série S) avec joint en élastomère (type E)
11/1/2022 - Paper - French -
Learn More€60.67 -
NF ISO 16030, E49-052 (10/2022)
Transmissions pneumatiques - Raccordements - Orifices et éléments mâles
10/1/2022 - Paper - French -
Learn More€75.67 -
NF ISO 15086-3, E48-392-3 (10/2022)
Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 3 : Measurement of hydraulic impedance
10/1/2022 - Paper - French -
Learn More€86.67 -
PR NF ISO 20145, E49-360PR (09/2022)
Transmissions pneumatiques - Méthodes d'essai de mesure du niveau de pression d'émission acoustique des silencieux d'échappement
9/1/2022 - Paper - English, French -
Learn More€115.50 -
NF ISO 8133, E48-503 (07/2022)
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
7/1/2022 - Paper - French -
Learn More€75.67 -
NF ISO 8132, E48-501 (06/2022)
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
6/1/2022 - Paper - French -
Learn More€75.67 -
NF EN ISO 6149-1, E48-050-1 (06/2022)
Raccordements pour transmissions hydrauliques et applications générales - Orifices et éléments mâles à filetage métrique ISO 261 et joint torique - Partie 1 : Orifices à joint torique dans un logement tronconique
6/1/2022 - Paper - French -
Learn More€48.00 -
PR NF ISO 21287, E49-007PR (04/2022)
Transmissions pneumatiques - Vérins - Vérins compacts, série 1000 kPa (10 bar), alésages de 20 mm à 100 mm
4/1/2022 - Paper - English, French -
Learn More€64.50 -
NF ISO 16889, E48-685 (03/2022)
Transmissions hydrauliques - Filtres - Évaluation des performances par la méthode de filtration en circuit fermé
3/1/2022 - Paper - French -
Learn More€108.33 -
NF ISO 10094-1, E49-088-1 (01/2022)
Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 1 : main characteristics to include in the supplier's literature
1/1/2022 - Paper - French -
Learn More€75.67 -
NF ISO 12151-3, E48-079-3 (01/2022)
Connections for hydraulic fluid power and general use - Hose fittings - Part 3 : Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
1/1/2022 - Paper - French -
Learn More€48.00 -
NF ISO 10094-2, E49-088-2 (01/2022)
Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 2 : Test methods to determine main characteristics to include in the supplier's literature
1/1/2022 - Paper - French -
Learn More€99.33 -
PR NF ISO 16028, E48-056PR (11/2021)
Transmissions hydrauliques - Raccords rapides de type à face plane pour usage à des pressions de 10 MPa (100 bar) à 31,5 MPa (315 bar) - Spécifications
11/1/2021 - Paper - English, French -
Learn More€62.60 -
XP ISO/TS 13725, E48-018 (10/2021)
Transmissions hydrauliques - Méthode d'évaluation de la charge de flambage d'un vérin hydraulique
10/1/2021 - Paper - French -
Learn More€75.67 -
NF ISO 11943, E48-682 (09/2021)
Hydraulic fluid power - Online automatic particle-counting systems for liquids - Methods of calibration and validation - Transmissions hydrauliques - Systèmes de comptage automatique en ligne de particules en suspension dans les liquides - Méthodes d'étalonnage et de validation.
9/1/2021 - Paper - French -
Learn More€99.33 -
NF ISO 6195, E48-038 (09/2021)
Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances
9/1/2021 - Paper - French -
Learn More€108.33 -
NF ISO 7425-2, E48-034-2 (08/2021)
Hydraulic fluid power cylinders - Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals - Part 2 : rod seal housings - Transmissions hydrauliques - Logements pour joints en élastomère renforcé par des matières plastiques - Dimensions et tolérances - Partie 2 : Logements de joints de tige
8/1/2021 - Paper - French -
Learn More€48.00 -
NF EN IEC 60545, C55-045 (08/2021)
Lignes directrices pour la mise en service et l'exploitation des turbines hydrauliques, des pompes-turbines et des pompes d'accumulation
8/1/2021 - Paper - French -
Learn More€141.33 -
NF ISO 7425-1, E48-034-1 (08/2021)
Hydraulic fluid power cylinders - Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals - Part 1 : piston seal housings - Transmissions hydrauliques - Logements pour joints en élastomère renforcé par des matières plastiques - Partie 1 : Logements de joints de piston
8/1/2021 - Paper - French -
Learn More€48.00 -
PR NF ISO 16889, E48-685PR (06/2021)
Hydraulic fluid power - Filters - Multi-pass method for evaluating filtration performance of a filter element
6/1/2021 - Paper - English, French -
Learn More€122.88 -
NF EN ISO 19879, E48-075 (03/2021)
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
3/1/2021 - Paper - French -
Learn More€75.67 -
NF EN 1829-1, E44-093-1 (01/2021)
High-pressure water jet machines - Safety requirements - Part 1 : machines
1/1/2021 - Paper - French -
Learn More€108.33 -
FD E48-361 (11/2020)
Hydraulic fluid power - Fixed and variable displacement motors - Spécification with order
11/1/2020 - Paper - French -
Learn More€48.00 -
€60.67
-
NF E44-603 (09/2020)
Dynamic stirrers - Commissioning - Equipements d'agitation et de mélange - Mise en service
9/1/2020 - Paper - French -
Learn More€48.00 -
NF ISO 6358-1/A1, E49-160-1/A1 (09/2020)
Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1 : general rules and test methods for steady-state flow - Amendment 1 : effective conductance
9/1/2020 - Paper - French -
Learn More€48.00 -
NF ISO 10770-3, E48-440-3 (08/2020)
Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3 : test methods for pressure control valves - Transmissions hydrauliques - Distributeurs hydrauliques à modulation électrique - Partie 3:Méthodes d'essai pour distributeurs de commande de pression
8/1/2020 - Paper - French -
Learn More€108.33 -
NF ISO 23309, E48-696 (08/2020)
Hydraulic fluid power systems - Assembled systems - Methods of cleaning lines by flushing
8/1/2020 - Paper - French -
Learn More€75.67 -
NF EN ISO 3949, T47-280 (08/2020)
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
8/1/2020 - Paper - French -
Learn More€75.67 -
NF ISO 18869, E48-073 (06/2020)
Hydraulic fluid power - Test methods for couplings actuated with or without tools
6/1/2020 - Paper - French -
Learn More€108.33 -
NF ISO 6358-2, E49-160-2 (05/2020)
Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 2 : alternative test methods - Transmissions pneumatiques - Détermination des caractéristiques de débit des composants traversés par un fluide compressible Partie 2 : méthodes d'essai alternatives
5/1/2020 - Paper - French -
Learn More€108.33 -
NF ISO 14743, E49-055 (05/2020)
Pneumatic fluid power - Push-in connectors for thermoplastic tubes
5/1/2020 - Paper - French -
Learn More€99.33 -
NF ISO 4411, E48-415 (04/2020)
Hydraulic fluid power - Valves - Determination of differential pressure /flow rate characteristics
4/1/2020 - Paper - French -
Learn More€60.67 -
NF ISO 5783, E48-400 (03/2020)
Hydraulic fluid power - Code for identification of valve mounting surfaces and cartridge valve cavities
3/1/2020 - Paper - French -
Learn More€34.67 -
NF ISO 5598, E48-000 (03/2020)
Fluid power systems and components - Vocabulary
3/1/2020 - Paper - English, French, German -
Learn More€204.00 -
FD ISO/TR 10946, E48-153 (01/2020)
Hydraulic fluid power - Gas-loaded accumulators with separator - Selection of preferred hydraulic ports
1/1/2020 - Paper - French -
Learn More€48.00 -
NF ISO 20145, E49-360 (01/2020)
Pneumatic fluid power - Test methods for measuring acoustic emission pressure levels of exhaust silencers
1/1/2020 - Paper - French -
Learn More€86.67 -
NF ISO 21018-4, E48-661-4 (12/2019)
Hydraulic fluid power - Monitoring the level of particulate contamination in the fluid - Part 4 : use of the light extinction technique
12/1/2019 - Paper - French -
Learn More€60.67 -
NF ISO 4409, E48-380 (10/2019)
Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
10/1/2019 - Paper - French -
Learn More€86.50 -
NF ISO 6403, E48-422 (08/2019)
Hydraulic fluid power - Valves controlling flow and pressure - Test methods
8/1/2019 - Paper - French -
Learn More€99.00 -
NF ISO 6301-2, E49-320-2 (07/2019)
Pneumatic fluid power - Compressed-air lubricators - Part 2 : test methods to determine the main characteristics to be included in supplier's literature
7/1/2019 - Paper - French -
Learn More€48.00 -
NF ISO 2942, E48-671 (05/2019)
Hydraulic fluid power - Filter elements - Verification of fabrication integrity and determination of the first bubble point
5/1/2019 - Paper - French -
Learn More€60.67 -
FD E48-043 (05/2019)
Hydraulic fluid power - O-rings - Guide for choice and control of supplies
5/1/2019 - Paper - French -
Learn More€119.00 -
NF ISO 6150, E49-053 (04/2019)
Pneumatic fluid power - Cylindrical quick-action couplings for maximum working pressures of 1 MPa, 1,6 Mpa, and 2,5 MPa (10 bar, 16 bar and 25 bar) - Plug connecting dimensions, specifications, application guidelines and testing - Transmissions pneumatiques - Raccords rapides cylindriques pour pressions maximales d'utilisation 1 MPa, 1,6 MPa et 2,5 MPa (10 bar, 16 bar et 25 bar) - Dimensions de raccordement de la partie mâle, spécifications, conseils d'utilisation et essais Pneumatic fluid power
4/1/2019 - Paper - French -
Learn More€73.00 -
XP ISO/TS 17165-2, E48-078-2 (03/2019)
Hydraulic fluid power - Hose assemblies - Part 2 : practices for hydraulic hose assemblies
3/1/2019 - Paper - French -
Learn More€86.50 -
NF ISO 8139, E49-035 (01/2019)
Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end spherical eyes
1/1/2019 - Paper - French -
Learn More€33.62 -
NF ISO 8140, E49-036 (12/2018)
Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end clevises
12/1/2018 - Paper - French -
Learn More€33.62 -
NF ISO 6099, E48-030 (12/2018)
Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types
12/1/2018 - Paper - French -
Learn More€140.00 -
€58.62
-
NF ISO 6164, E48-054 (09/2018)
Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80 - Transmissions hydrauliques - Brides de raccordement carrées monobloc à quatre vis pour des pressions d'utilisation de 25 MPa et 40 MPa (250 bar et 400 bar)
9/1/2018 - Paper - French -
Learn More€73.23 -
NF EN ISO 8434-1, E48-064-1 (08/2018)
Metallic tube connections for fluid power and general use - Part 1 : 24 degree cone connectors
8/1/2018 - Paper - French -
Learn More€119.00 -
NF ISO 5597, E48-040 (07/2018)
Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
7/1/2018 - Paper - French -
Learn More€73.23 -
NF ISO 15552, E49-003 (06/2018)
Pneumatic fluid power - Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm - Basic, mounting and accessories dimensions - Transmissions pneumatiques - Vérins avec fixations détachables, série 1 000 kPa (10 bar), alésages de 32 mm à 320 mm - Dimensions de base, des fixations et des acces
6/1/2018 - Paper - French -
Learn More€73.23 -
NF ISO 18237, E48-664 (06/2018)
Hydraulic fluid power - Method for evaluating water separation performance of dehydrators - Déshydrateurs de fluides hydrauliques - Méthode d'évaluation des performances de séparation de l'eau
6/1/2018 - Paper - French -
Learn More€66.25 -
NF ISO 6162-2, E48-055-2 (04/2018)
Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 2 : flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
4/1/2018 - Paper - French -
Learn More€83.85 -
NF ISO 5782-1, E49-310-1 (02/2018)
Pneumatic fluid power - Compressed air filters - Part 1 : main characteristics to be included in supplier's literature and product-marking requirements
2/1/2018 - Paper - French -
Learn More€58.62 -
NF ISO 12669, E48-665 (01/2018)
Hydraulic fluid power - Method for determining the required cleanliness level (RCL) of a system - Transmissions hydrauliques - Méthode de détermination du niveau de propreté requis d'un système
1/1/2018 - Paper - French -
Learn More€75.50 -
NF ISO 6301-1, E49-320-1 (12/2017)
Pneumatic fluid power - Compressed-air lubricators - Part 1 : Main characteristics to be included in supplier's literature and product-marking requirements
12/1/2017 - Paper - French -
Learn More€46.55 -
NF ISO 7789, E48-402 (12/2017)
Hydraulic fluid power - Two-, three - and four-port screw-in cartridge valves - Cavities - Transmissions hydrauliques - Distributeurs à cartouche à visser à deux, trois ou quatre orifices - Logements
12/1/2017 - Paper - French -
Learn More€96.12 -
FD E48-350 (11/2017)
Hydraulic fluid power - Pumps, motors and integral transmissions - Recommendations for starting, servicing and maintenance
11/1/2017 - Paper - French -
Learn More€60.67 -
NF ISO 3968, E48-677 (11/2017)
Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow
11/1/2017 - Paper - French -
Learn More€75.50 -
NF EN ISO 6149-4, E48-050-4 (09/2017)
Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4 : dimensions, design, test methods and requirements for external hex and internal hex port plugs - Raccordements pour transmissions hydrauliques et applications générales - Orifices et éléments mâles à filetage métrique ISO 261 et joint torique - Partie 4 : Dimensions, conception, méthodes d'essai et exigences des bouchons d'orifices à six pans externes
9/1/2017 - Paper - French -
Learn More€58.62 -
NF ISO 6605, E48-083 (08/2017)
Hydraulic fluid power - Test methods for hoses and hose assemblies - Transmissions hydrauliques - Tuyaux et flexibles - Méthodes d'essai
8/1/2017 - Paper - French -
Learn More€58.62 -
€135.40
-
NF E44-602 (06/2017)
Dynamic agitators - Hydrodynamic performance evaluation - Agitateurs dynamiques - Evaluation de la performance hydrodynamique
6/1/2017 - Paper - French -
Learn More€75.67 -
NF ISO 12151-1/A1, E48-079-1/A1 (05/2017)
Connections for hydraulic fluid power and general use - Hose fittings - Part 1 : hose fittings with ISO 8434-3 O-ring face seal ends - Amendment 1
5/1/2017 - Paper - French -
Learn More€25.67 -
NF ISO 1219-3, E04-056-3 (04/2017)
Fluid power systems and components - Graphical symbols and circuit diagrams - Part 3 : symbol modules and connected symbols in circuit diagrams - Transmissions hydrauliques et pneumatiques - Symboles graphiques et schémas de circuit - Partie 3 : empilement de sandwich dans schémas de circuit
4/1/2017 - Paper - French -
Learn More€78.50 -
NF ISO 9974-4, E48-065-4 (04/2017)
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4 : dimensions, design, test methods and requirements for external hex and internal hex port plugs - Raccordements pour applications générales et transmissions hydrauliques et pneumatiques - Orifices et éléments mâles à filetage ISO 261 et joint en élastomère ou étanchéité métal sur métal - Dimensions, conception, méthodes d'essai et exigences des bouchons d'orifice à six pans externes et
4/1/2017 - Paper - French -
Learn More€60.67 -
NF ISO 3601-2, E48-550 (11/2016)
Fluid power systems - O-rings - Part 2 : housing dimensions for general applications
11/1/2016 - Paper - French -
Learn More€119.00 -
NF ISO 1219-1/A1, E04-056-1/A1 (08/2016)
Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1 : graphical symbols for conventional use and data-processing applications - Amendment 1
8/1/2016 - Paper - French -
Learn More€25.50 -
NF E48-401 (03/2016)
Hydraulic fluid power - Two-, three - and four-port screw-in cartridge valves - Cavities with ISO 725 (UN and UNF) threads
3/1/2016 - Paper - French -
Learn More€60.67 -
NF ISO 18413, E48-659 (05/2015)
Hydraulic fluid power - Cleanliness of components - Inspection document and principles related to contaminant extraction and analysis, and data reporting - Transmissions hydrauliques - Propreté des pièces et composants - Documents de contrôle et principes d'extraction et d'analyse des polluants et d'expression des résultats
5/1/2015 - Paper - French -
Learn More€119.00 -
NF ISO 6358-3, E49-160-3 (02/2015)
Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fmuids - Part 3 : method for calculating steady-state flow-rate characteristics of systems - Transmissions pneumatiques
2/1/2015 - Paper - French -
Learn More€135.26 -
NF EN ISO 1179-1, E49-051-1 (01/2014)
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1 : threaded ports - Raccordements pour applications générales et transmissions hydrauliques et pneumatiques
1/1/2014 - Paper - French -
Learn More€48.00 -
FD ISO/TR 10686, E48-697 (01/2014)
Hydraulic fluid power - Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
1/1/2014 - Paper - French -
Learn More€86.50 -
NF ISO 1219-2, E04-056-2 (10/2012)
Fluid power systems and components - Graphic symbols and circuit diagrams - Part 2 : circuit diagrams - Transmissions hydrauliques et pneumatiques
10/1/2012 - Paper - English, French, German -
Learn More€98.00 -
NF ISO 6953-3, E49-330-3 (10/2012)
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 3 : alternative test methods for measuring the flow-rate characteristics of pressure regulators - Transmissions pneumatiques
10/1/2012 - Paper - French -
Learn More€111.23 -
NF ISO 6194-4, E48-372-4 (09/2012)
Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 4 : performance test procedures
9/1/2012 - Paper - French -
Learn More€73.00 -
NF ISO 6194-5, E48-372-5 (09/2012)
Rotary-shaft lip-type seals incorporating elastomeric sealing elements - Part 5 : identification of visual imperfections - Bagues d'étanchéité à lèvres pour arbres tournants incorporant des éléments d'étanchéité en élastomère
9/1/2012 - Paper - French -
Learn More€58.33 -
NF ISO 6194-3, E48-372-3 (09/2012)
Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 3 : storage, handling and installation
9/1/2012 - Paper - French -
Learn More€58.62 -
NF ISO 1219-1, E04-056-1 (09/2012)
Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1 : graphical symbols for conventional use and data-processing applications - Transmissions hydrauliques et pneumatiques
9/1/2012 - Paper - English, French, German -
Learn More€194.50 -
NF ISO 6072, E48-610 (02/2012)
Rubber - Compatibility between hydraulic fluids and standard elastomeric materials - Caoutchoucs
2/1/2012 - Paper - French -
Learn More€75.67 -
NF EN ISO 4413, E48-201 (03/2011)
Hydraulic fluid power - General rules and safety requirements for systems and their components - Transmissions hydrauliques
3/1/2011 - Paper - French -
Learn More€107.50 -
NF EN ISO 4414, E49-201 (03/2011)
Pneumatic fluid power - General rules and safety requirements for systems and their components - Transmissions pneumatiques
3/1/2011 - Paper - French -
Learn More€98.00 -
NF E48-118 (11/2009)
Hydraulic fluid power - Cylinders 16 MPa medium series - Mounting dimensions for double rod cylinders - Transmissions hydrauliques
11/1/2009 - Paper - French -
Learn More€60.67 -
NF E48-119 (11/2009)
Hydraulic fluid power - Simple rod cylinders 16 MPa, compact series - MX 5 mounting - Transmissions hydrauliques
11/1/2009 - Paper - French -
Learn More€34.67 -
NF E48-420 (11/2009)
Fluid power systems - Connectors for fitting of transducers, sensors and preactuator - Pins attribution - Transmissions hydrauliques et pneumatiques
11/1/2009 - Paper - French -
Learn More€34.67 -
NF E48-117 (11/2009)
Hydraulic fluid power - Cylinders 16 MPa series compact - Mounting dimensions for double rod cylinders - Transmissions hydrauliques
11/1/2009 - Paper - French -
Learn More€60.67 -
NF ISO 8434-6, E48-064-6 (10/2009)
Metallic tube connections for fluid power and general use - Part 6 : 60° cone connectors with or without O-ring
10/1/2009 - Paper - French -
Learn More€98.00 -
NF ISO 12151-6, E48-079-6 (09/2009)
Connections for hydraulic fluid power and general use - Hose fittings - Part 6 : hose fittings with ISO 8434-6 60° cone ends - Raccordements pour transmissions hydrauliques et applications générales
9/1/2009 - Paper - French -
Learn More€75.50 -
NF ISO 12500-3, E51-251-3 (09/2009)
Filters for compressed air - Test methods - Part 3 : particulates - Filtres pour air comprimé
9/1/2009 - Paper - French -
Learn More€73.00 -
NF ISO 2941, E48-672 (08/2009)
Hydraulic fluid power - Filter elements - Verification of collapse/burst pressure rating - Transmissions hydrauliques
8/1/2009 - Paper - French -
Learn More€60.67 -
NF EN ISO 1179-3, E49-051-3 (09/2008)
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3 : light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) - Raccordements pour applications générales et transmissions hydrauliques et pneumatiques
9/1/2008 - Paper - French -
Learn More€75.67 -
NF EN ISO 1179-4, E49-051-4 (09/2008)
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4 : stud ends for general use only with metal-to-metal sealing (type B) - Raccordements pour applications générales et transmissions hydrauliques et pneumatiques
9/1/2008 - Paper - French -
Learn More€48.00 -
NF ISO 21018-3, E48-661-3 (07/2008)
Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - Part 3 : use of the filter blockage technique - Transmissions hydrauliques
7/1/2008 - Paper - French -
Learn More€75.67 -
NF ISO 21018-1, E48-661-1 (07/2008)
Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - Part 1 : general principles - Transmissions hydrauliques
7/1/2008 - Paper - French -
Learn More€86.67 -
NF EN 1829-2, E44-093-2 (05/2008)
High-pressure water jet machines - Safety requirements - Part 2 : hoses, hose lines and connectors - Machines à jet d'eau à haute pression
5/1/2008 - Paper - French -
Learn More€60.50 -
FD E48-155 (04/2008)
Gas-loaded accumulators - Guide for the application of guarantee factor method as described in EN 14359
4/1/2008 - Paper - English, French -
Learn More€90.00 -
NF ISO 17165-1, E48-078-1 (03/2008)
Hydraulic fluid power - Hose assemblies - Part 1 : dimensions and requirements - Transmissions hydrauliques
3/1/2008 - Paper - French -
Learn More€86.67 -
NF ISO 12151-4, E48-079-4 (02/2008)
Connections for hydraulic fluid power and general use - Hose fittings - Part 4 : hose fittings with ISO 6149 metric stud ends - Raccordements pour transmissions hydrauliques et applications générales
2/1/2008 - Paper - French -
Learn More€58.62 -
NF ISO 8434-2, E48-064-2 (02/2008)
Metallic tube connections for fluid power and general use - Part 2 : 37° flared connectors
2/1/2008 - Paper - French -
Learn More€130.67 -
NF ISO 12151-5, E48-079-5 (02/2008)
Connections for hydraulic fluid power and general use - Hose fittings - Part 5 : hose fittings with ISO 8434-2 37° flared ends - Raccordements pour transmissions hydrauliques et applications générales
2/1/2008 - Paper - French -
Learn More€60.67 -
NF ISO 8434-3, E48-064-3 (12/2006)
Metallic tube connections for fluid power and general use - Part 3 : O-ring face seal connectors
12/1/2006 - Paper - French -
Learn More€144.50 -
NF ISO 6022, E48-025 (07/2006)
Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
7/1/2006 - Paper - French -
Learn More€66.00 -
NF E48-421 (06/2006)
Hydraulic fluid power - Identification of cartride valves's housings of drilled blocks - Transmissions hydrauliques
6/1/2006 - Paper - French -
Learn More€34.67 -
NF ISO 4392-3, E48-383 (06/2005)
Hydraulic fluid power - Determination of characteristics of motors - Part 3 : at constant flow and at constant torque - Transmissions hydrauliques
6/1/2005 - Paper - French -
Learn More€73.23 -
NF ISO 5599-2/A1, E49-080-2/A1 (12/2004)
Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector - Transmissions pneumatiques
12/1/2004 - Paper - French -
Learn More€25.67 -
FD ISO/TR 10949, E48-657 (06/2003)
Hydraulic fluid power - Component cleanliness - Guidelines for achieving and controlling cleanliness of components from manufacture until installation - Transmissions hydrauliques
6/1/2003 - Paper - French -
Learn More€75.50 -
NF ISO 4407, E48-651 (09/2002)
Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope - Transmissions hydrauliques
9/1/2002 - Paper - French -
Learn More€86.67 -
NF ISO 10767-3, E48-393 (09/2001)
Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 3 : method for motors - Transmissions hydrauliques
9/1/2001 - Paper - French -
Learn More€104.50 -
€60.50
-
NF E48-692 (02/1997) (R2007)
Hydraulic fluid power. Fluids. Measurement of filtrability of HFC and HFD class fire resistant fluids. - Transmissions hydrauliques
2/1/1997 - Paper - French -
Learn More€75.67 -
NF E49-100 (12/1996) (R2001)
Pneumatic fluid power. Polyamid tubes. Dimensions. Specifications. - Transmissions pneumatiques
12/1/1996 - Paper - French -
Learn More€86.67 -
NF E48-704 (11/1995)
Hydraulic fluid power. Filter elements for tank top return filters. Dimensions. - Transmissions hydrauliques
11/1/1995 - Paper - French -
Learn More€48.00 -
NF ISO 4400, E48-411 (06/1995)
Fluid power systems and components. Three-pin electrical plug connectors with earth contact. Characteristics and requirements. - Transmissions hydrauliques et pneumatiques
6/1/1995 - Paper - French -
Learn More€60.50 -
NF E48-678 (04/1995)
Hydraulic fluid power. Filters for receiver venting and pressurization. Performances. - Transmissions hydrauliques
4/1/1995 - Paper - French -
Learn More€60.67 -
NF E49-101 (12/1994)
Pneumatic fluid power. Polyurethane tubes. Dimensions. Specifications. - Transmissions pneumatiques
12/1/1994 - Paper - French -
Learn More€60.67 -
NF E48-702 (09/1993) (R2004)
Hydraulic fluid power. Filter elements and filter housings. Characteristics, requirements. - Transmissions hydrauliques
9/1/1993 - Paper - French -
Learn More€60.67 -
NF ISO 5784-3, E49-602 (08/1990)
Fluid power systems and components. Fluid logic circuit. Part 3 : symbols for logic sequencers and related functions. - Transmissions hydrauliques et pneumatiques
8/1/1990 - Paper - French -
Learn More€96.12 -
NF E48-679 (07/1990)
Hydraulic fluid power. Filter elements. Determination of absolute filtration rating. - Transmissions hydrauliques
7/1/1990 - Paper - French -
Learn More€99.33 -
€60.67
-
M82-400 (06/1980) (R2005)
Mining equipment. Recommendations for the manufacturers of machinery using hydraulic transmissions for headings underground.
6/1/1980 - Paper - French -
Learn More€60.67