23.100.10 : Pumps and motors

114 Item(s)

Set Ascending Direction
per page

List  Grid 

  • BS ISO 10767-1:2015 + Redline

    Tracked Changes. Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Method for determining source flow impedance pumps
    2/26/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS EN IEC 62364:2019 + Redline

    Tracked Changes. Hydraulic machines. Guidelines for dealing with hydro-abrasive erosion in kaplan, francis, and pelton turbines
    2/24/2020 - PDF - English - BSI
    Learn More
    €422.10

  • SAE J 745:2019-11-20

    Hydraulic Power Pump Test Procedure
    11/20/2019 - PDF - English - SAE
    Learn More
    €77.00

  • SAE J 746:2019-11-20

    Hydraulic Motor Test Procedures
    11/20/2019 - PDF - English - SAE
    Learn More
    €77.00

  • NF ISO 4409, E48-380 (10/2019)

    Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance - Transmissions hydrauliques - Pompes, moteurs et variateurs volumétriques - Méthodes d'essai et de présentation des données de base du fonctionnement en régime permanent
    10/1/2019 - Paper - French - AFNOR
    Learn More
    €73.30

  • BS ISO 4409:2019

    Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance
    7/18/2019 - PDF - English - BSI
    Learn More
    €253.59

  • UNE-EN IEC 62364:2019

    Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in Kaplan, Francis and Pelton Turbines (Endorsed by Asociación Española de Normalización in April of 2019.)
    4/1/2019 - PDF - English - AENOR
    Learn More
    €12.00

  • BS EN IEC 62364:2019

    Hydraulic machines. Guidelines for dealing with hydro-abrasive erosion in kaplan, francis, and pelton turbines
    3/21/2019 - PDF - English - BSI
    Learn More
    €324.69

  • IEC 62364:2019 + Redline

    IEC 62364:2019 (Redline version) Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in Kaplan, Francis and Pelton turbines
    1/14/2019 - PDF - English - IEC
    Learn More
    €409.00

  • IEC 62364:2019

    IEC 62364:2019 Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in Kaplan, Francis and Pelton turbines
    1/14/2019 - PDF - English, French - IEC
    Learn More
    €315.00

  • FD E48-350 (11/2017)

    Hydraulic fluid power - Pumps, motors and integral transmissions - Recommendations for starting, servicing and maintenance - Transmissions hydrauliques - Pompes, moteurs et variateurs - Recommandations pour la mise en service, l'utilisation et l'entretien
    11/1/2017 - Paper - French - AFNOR
    Learn More
    €51.24

  • JIS B 8349-1:2017

    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1: Method for determining source flow ripple and source impedance of pumps
    10/20/2017 - PDF - Japanese - JSA
    Learn More
    €41.86

  • SAE J 744:2016-10-05

    Hydraulic Pump and Motor Mounting and Drive Dimensions
    10/5/2016 - PDF - English - SAE
    Learn More
    €77.00

  • BS ISO 10767-1:2015

    Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Method for determining source flow impedance pumps
    3/31/2016 - PDF - English - BSI
    Learn More
    €253.59

  • NF ISO 10767-1, E48-390-1 (12/2015)

    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1 : method for determining source flow ripple and source impedance of pumps - Transmissions hydrauliques
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €84.02

  • ISO 10767-1:2015

    Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps
    10/1/2015 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 10767-1:2015

    Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps
    10/1/2015 - Paper - French - ISO
    Learn More
    €144.00

  • SAE J 1776:2014-02-21

    Marine Vehicles - Hydraulic System Pumps and Motors - Design and Specification Guide
    2/21/2014 - PDF - English - SAE
    Learn More
    €77.00

  • UNE-EN 62364:2013

    Hydraulic machines - Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines (Endorsed by AENOR in October of 2013.)
    10/1/2013 - PDF - English - AENOR
    Learn More
    €110.00

  • JIS B 8324/AMENDMENT 1:2013

    Submersible motor pumps for deep well (Amendment 1)
    9/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 8325/AMENDMENT 1:2013

    Submersible motor pumps for sump (Amendment 1)
    9/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • SAE J 1341:2012-11-19

    Test Method for Measuring Power Consumption of Hydraulic Pumps for Trucks and Buses
    11/19/2012 - PDF - English - SAE
    Learn More
    €77.00

  • JIS B 8384:2011 (R2016)

    Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
    11/21/2011 - PDF - Japanese - JSA
    Learn More
    €36.27

  • JIS B 8382:2010 (R2015)

    Hydraulic fluid power - Positive displacement pumps and motors - Determination of derived capacity
    7/20/2010 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF ISO 8426, E48-354 (07/2008)

    Hydraulic fluid power - Positive displacement pumps and motors - Determination of derived capacity - Transmissions hydrauliques
    7/1/2008 - Paper - French - AFNOR
    Learn More
    €64.01

  • JIS B 8397-1:2008 (R2013)

    Hydraulic fluid power - Determination of characteristics of motors - Part 1: At constant low speed and constant pressure
    6/20/2008 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 8397-2:2008 (R2013)

    Hydraulic fluid power - Determination of characteristics of motors - Part 2: Startability
    6/20/2008 - PDF - Japanese - JSA
    Learn More
    €25.00

  • BS ISO 8426:2008

    Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity
    2/29/2008 - PDF - English - BSI
    Learn More
    €215.67

  • ISO 8426:2008

    Hydraulic fluid power — Positive displacement pumps and motors — Determination of derived capacity
    2/1/2008 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 8426:2008

    Hydraulic fluid power — Positive displacement pumps and motors — Determination of derived capacity
    2/1/2008 - Paper - French - ISO
    Learn More
    €92.00

  • JIS B 8353-1:2006 (R2016)

    Hydraulic fluid power - Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method - Part 1: Pumps
    10/20/2006 - PDF - Japanese - JSA
    Learn More
    €25.00

  • UNE-EN 60609-1:2005

    Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation -- Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines
    10/26/2005 - PDF - Spanish - AENOR
    Learn More
    €57.00

  • UNE-EN 60609-1:2005

    Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation -- Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines
    10/26/2005 - PDF - English - AENOR
    Learn More
    €68.00

  • NF ISO 4392-3, E48-383 (06/2005)

    Hydraulic fluid power - Determination of characteristics of motors - Part 3 : at constant flow and at constant torque - Transmissions hydrauliques
    6/1/2005 - Paper - French - AFNOR
    Learn More
    €64.01

  • JIS B 2292-1:2005 (R2016)

    Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units
    3/20/2005 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 2292-2:2005 (R2016)

    Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series
    3/20/2005 - PDF - Japanese - JSA
    Learn More
    €25.00

  • BS EN 60609-1:2005

    Hydraulic turbines, storage pumps and pump-turbines. Cavitation pitting evaluation Evaluation in reaction pump-turbines
    2/10/2005 - PDF - English - BSI
    Learn More
    €215.67

  • IEC 60609-1:2004

    IEC 60609-1:2004 Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation - Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines
    11/24/2004 - PDF - English, French - IEC
    Learn More
    €147.00

  • BS ISO 17559:2003

    Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics
    11/22/2004 - PDF - English - BSI
    Learn More
    €215.67

  • JIS B 8349-2:2004 (R2014)

    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 2: Simplified method for pumps
    11/20/2004 - PDF - Japanese - JSA
    Learn More
    €36.27

  • NF ISO 17559, E48-362 (06/2004)

    Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics - Transmissions hydrauliques
    6/1/2004 - Paper - French - AFNOR
    Learn More
    €84.02

  • DIN ISO 3019-2:2004-02

    Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001)
    2/1/2004 - - - DIN
    Learn More
    From: €75.40

  • DIN ISO 3019-1:2004-02

    Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units (ISO 3019-1:2001)
    2/1/2004 - - - DIN
    Learn More
    From: €61.70

  • NF ISO 16902-1, E48-394-1 (01/2004)

    Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques : engineering method - Part 1 : pumps - Transmissions hydrauliques
    1/1/2004 - Paper - French - AFNOR
    Learn More
    €73.30

  • ISO 17559:2003

    Hydraulic fluid power — Electrically controlled hydraulic pumps — Test methods to determine performance characteristics
    11/1/2003 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 17559:2003

    Hydraulic fluid power — Electrically controlled hydraulic pumps — Test methods to determine performance characteristics
    11/1/2003 - Paper - French - ISO
    Learn More
    €123.00

  • BS ISO 16902-1:2003

    Hydraulic fluid power. Test code for the determination of sound power levels using intensity techniques. Engineering method Pumps
    7/16/2003 - PDF - English - BSI
    Learn More
    €154.05

  • ISO 16902-1:2003

    Hydraulic fluid power — Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method — Part 1: Pumps
    5/1/2003 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 16902-1:2003

    Hydraulic fluid power — Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method — Part 1: Pumps
    5/1/2003 - Paper - French - ISO
    Learn More
    €61.00

  • JIS B 8350-1:2003 (R2017)

    Hydraulic fluid power - Test code for determination of airborne noise levels - Part 1: Pumps
    3/20/2003 - PDF - Japanese - JSA
    Learn More
    €41.86

  • JIS B 8350-2:2003 (R2017)

    Hydraulic fluid power - Test code for determination of airborne noise levels - Part 2: Motors
    3/20/2003 - PDF - Japanese - JSA
    Learn More
    €41.86

  • JIS B 8350-3:2003 (R2017)

    Hydraulic fluid power - Test code for determination of airborne noise levels - Part 3: Pumps - Method using a parallelepiped microphone array
    3/20/2003 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 8324:2003 (R2008)

    Submersible motor pumps for deep well
    3/20/2003 - PDF - Japanese - JSA
    Learn More
    €41.86

  • JIS B 8325:2003 (R2008)

    Submersible motor pumps for sump
    3/20/2003 - PDF - Japanese - JSA
    Learn More
    €36.27

  • NF ISO 4392-2, E48-382 (10/2002)

    Hydraulic fluid power - Determination of characteristics of motors - Part 2 : startability - Transmissions hydrauliques
    10/1/2002 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF ISO 4392-1, E48-381 (10/2002)

    Hydraulic fluid power - Determination of characteristics of motors - Part 1 : at constant low speed and constant pressure - Transmissions hydrauliques
    10/1/2002 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF ISO 3019-2, E48-353 (06/2002)

    Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2 : metric series - Transmissions hydrauliques
    6/1/2002 - Paper - French - AFNOR
    Learn More
    €84.02

  • BS ISO 4392-1:2002

    Hydraulic fluid power. Determination of characteristics motors At constant low speed and pressure
    4/25/2002 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 4392-2:2002

    Hydraulic fluid power. Determination of characteristics motors Startability
    4/23/2002 - PDF - English - BSI
    Learn More
    €215.67

  • JIS B 8661:2002 (R2016)

    Hydraulic fluid power - Test method for electrically controlled oil hydraulic pumps
    3/20/2002 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 8348:2002 (R2016)

    Hydraulic fluid power - Pumps and motors - Test methods
    3/20/2002 - PDF - Japanese - JSA
    Learn More
    €25.00

  • ISO 4392-1:2002

    Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure
    2/1/2002 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 4392-1:2002

    Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure
    2/1/2002 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 4392-2:2002

    Hydraulic fluid power — Determination of characteristics of motors — Part 2: Startability
    2/1/2002 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 4392-2:2002

    Hydraulic fluid power — Determination of characteristics of motors — Part 2: Startability
    2/1/2002 - Paper - French - ISO
    Learn More
    €92.00

  • NFPA/T2.13.13:2002 (R2015)

    Recommended practice - Hydraulic fluid power - Fluids - Viscosity selection criteria for hydraulic motors and pumps
    1/1/2002 - Paper - English - NFPA-FLUID
    Learn More
    €65.00

  • NF ISO 10767-3, E48-393 (09/2001)

    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 3 : method for motors - Transmissions hydrauliques
    9/1/2001 - Paper - French - AFNOR
    Learn More
    €91.50

  • BS ISO 3019-1:2001

    Hydraulic fluid power. Dimensions and identification code for mounting flanges shaft ends of displacement pumps motors Inch series shown in metric units
    8/15/2001 - PDF - English - BSI
    Learn More
    €154.05

  • ISO 3019-1:2001

    Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 1: Inch series shown in metric units
    6/1/2001 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 3019-1:2001

    Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 1: Inch series shown in metric units
    6/1/2001 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 3019-2:2001

    Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 2: Metric series
    6/1/2001 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 3019-2:2001

    Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 2: Metric series
    6/1/2001 - Paper - French - ISO
    Learn More
    €123.00

  • JIS B 8397-3:2001 (R2015)

    Hydraulic fluid power - Determination of characteristics of motors - Part 3: At constant flow and at constant torque
    3/20/2001 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 8383:2000 (R2014)

    Hydraulic fluid power - Pumps and motors - Geometric displacements
    8/20/2000 - PDF - Japanese - JSA
    Learn More
    €32.50

  • NF ISO 10767-2, E48-391 (07/2000)

    Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps - Transmissions hydrauliques
    7/1/2000 - Paper - French - AFNOR
    Learn More
    €84.02

  • JIS B 8385:2000 (R2014)

    Hydraulic fluid power - Pumps, motors and integral transmissions - Parameter definitions and letter symbols
    6/20/2000 - PDF - Japanese - JSA
    Learn More
    €32.50

  • NFPA/T3.9.22:2000 (R2014)

    Pump/motor - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pump and motor
    1/1/2000 - Paper - English - NFPA-FLUID
    Learn More
    €35.00

  • BS ISO 10767-3:1999

    Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Method for motors
    12/15/1999 - PDF - English - BSI
    Learn More
    €253.59

  • ISO 10767-3:1999

    Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors
    12/1/1999 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 10767-3:1999

    Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors
    12/1/1999 - Paper - French - ISO
    Learn More
    €123.00

  • BS ISO 10767-2:1999

    Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Simplified method for pumps
    11/15/1999 - PDF - English - BSI
    Learn More
    €215.67

  • ISO 10767-2:1999

    Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 2: Simplified method for pumps
    10/1/1999 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 10767-2:1999

    Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 2: Simplified method for pumps
    10/1/1999 - Paper - French - ISO
    Learn More
    €123.00

  • BS 7275-3:1995

    Determination of hydraulic fluid power motor characteristics Method at constant flow and torque
    3/15/1995 - PDF - English - BSI
    Learn More
    €130.35

  • ISO 4392-3:1993

    Hydraulic fluid power — Determination of characteristics of motors — Part 3: At constant flow and at constant torque
    12/1/1993 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 4392-3:1993

    Hydraulic fluid power — Determination of characteristics of motors — Part 3: At constant flow and at constant torque
    12/1/1993 - Paper - French - ISO
    Learn More
    €61.00

  • BS 5944-1:1992

    Measurement of airborne noise from hydraulic fluid power systems and components Method test for pumps
    12/15/1992 - PDF - English - BSI
    Learn More
    €215.67

  • BS 5944-2:1992

    Measurement of airborne noise from hydraulic fluid power systems and components Method test for motors
    12/15/1992 - PDF - English - BSI
    Learn More
    €215.67

  • BS 5944-6:1992

    Measurement of airborne noise from hydraulic fluid power systems and components Method test for pumps using a parallelepiped microphone array
    12/15/1992 - PDF - English - BSI
    Learn More
    €130.35

  • NF ISO 4412-1, E48-386 (07/1992)

    Hydraulic fluid power. Test code for determination of airborne noise levels. Part 1 : pumps. - Transmissions hydrauliques
    7/1/1992 - Paper - French - AFNOR
    Learn More
    €91.50

  • NF ISO 4412-2, E48-387 (07/1992)

    Hydraulic fluid power. Test code for determination of airborne noise levels. Part 2 : motors. - Transmissions hydrauliques
    7/1/1992 - Paper - French - AFNOR
    Learn More
    €91.50

  • NF ISO 4412-3, E48-388 (07/1992)

    Hydraulic fluid power. Test code for determination of airborne noise levels. Part 3 : pumps. Method using a parallelepiped microphone array. - Transmissions hydrauliques
    7/1/1992 - Paper - French - AFNOR
    Learn More
    €64.01

  • NF E48-361 (03/1992)

    Hydraulic fluid power. Fixed and variable displacement motors. Specification with oder. - Transmissions hydrauliques
    3/1/1992 - Paper - French - AFNOR
    Learn More
    €51.24

  • ISO 4412-1:1991

    Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps
    8/1/1991 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 4412-1:1991

    Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps
    8/1/1991 - Paper - French - ISO
    Learn More
    €123.00

  • ISO 4412-2:1991

    Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors
    8/1/1991 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 4412-2:1991

    Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors
    8/1/1991 - Paper - French - ISO
    Learn More
    €123.00

  • ISO 4412-3:1991

    Hydraulic fluid power — Test code for determination of airborne noise levels — Part 3: Pumps — Method using a parallelepiped microphone array
    8/1/1991 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 4412-3:1991

    Hydraulic fluid power — Test code for determination of airborne noise levels — Part 3: Pumps — Method using a parallelepiped microphone array
    8/1/1991 - Paper - French - ISO
    Learn More
    €61.00

  • NF ISO 9206, L45-201 (03/1991)

    Aerospace. Constant displacement hydraulic motors. General specifications. - Aéronautique et espace
    3/1/1991 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF ISO 3662, E48-352 (12/1989)

    Hydraulic fluid power. Pumps and motors. Geometric displacements. - Transmissions hydrauliques
    12/1/1989 - Paper - French - AFNOR
    Learn More
    €29.39

  • BS 5944-5:1985

    Measurement of airborne noise from hydraulic fluid power systems and components Simplified method determining sound levels pumps using an anechoic chamber
    7/31/1985 - PDF - English - BSI
    Learn More
    €130.35

  • DIN ISO 4391:1984-10

    Hydraulic fluid power; pumps, motors and integral transmissions; parameter definitions and letter symbols
    10/1/1984 - PDF - German - DIN
    Learn More
    €54.80

  • ISO 4391:1983

    Hydraulic fluid power — Pumps, motors and integral transmissions — Parameter definitions and letter symbols
    6/1/1983 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 4391:1983

    Hydraulic fluid power — Pumps, motors and integral transmissions — Parameter definitions and letter symbols
    6/1/1983 - Paper - French - ISO
    Learn More
    €61.00

  • NBN E 48-006:1983

    Hydraulic fluid power - Pumps, motors and integral transmissions - Parameter definitions and letter symbols
    1/1/1983 - PDF - French - NBN
    Learn More
    €45.00

  • DIN 45635-26:1979-07

    Measurement of airborne noise emitted by machines; enveloping surface method, hydraulic pumps
    7/1/1979 - PDF - German - DIN
    Learn More
    €23.80

  • NBN E 48-003:1976

    Hydraulic pumps and motors - Geometric displacements
    12/16/1977 - PDF - French - NBN
    Learn More
    €30.00

  • NBN E 48-003:1976

    Hydraulic pumps and motors - Geometric displacements
    12/16/1977 - PDF - Dutch - NBN
    Learn More
    €30.00

  • JIS B 0901:1977 (R2014)

    Diameter of shafts
    3/1/1977 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0901:1977

    Diameter of shafts
    1/1/1977 - PDF - English - JSA
    Learn More
    €14.03

  • ISO 3662:1976

    Hydraulic fluid power — Pumps and motors — Geometric displacements
    11/1/1976 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 3662:1976

    Hydraulic fluid power — Pumps and motors — Geometric displacements
    11/1/1976 - Paper - French - ISO
    Learn More
    €40.00

  • IEC 60545:1976

    IEC 60545:1976 Guide for commissioning, operation and maintenance of hydraulic turbines
    1/1/1976 - PDF - English, French - IEC
    Learn More
    €147.00

114 Item(s)

Set Ascending Direction
per page

List  Grid