23.060 : Valves
-
UNE-EN ISO 5117:2024
Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023)
4/3/2024 - PDF - Spanish - AENOR
Learn More€85.00 -
UNE-EN ISO 5117:2024
Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023)
4/3/2024 - PDF - English - AENOR
Learn More€102.00 -
UNE-EN 17821:2024
Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
3/27/2024 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN 17821:2024
Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
3/27/2024 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN 14432:2024
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves
1/31/2024 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 14432:2024
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves
1/31/2024 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 161:2023
Automatic shut-off valves for gas burners and gas appliances
12/27/2023 - PDF - Spanish - AENOR
Learn More€114.00 -
UNE-EN 161:2023
Automatic shut-off valves for gas burners and gas appliances
12/27/2023 - PDF - English - AENOR
Learn More€136.80 -
UNE-EN 16304:2023
Automatic vent valves for gas burners and gas burning appliances
12/27/2023 - PDF - Spanish - AENOR
Learn More€89.00 -
UNE-EN 16304:2023
Automatic vent valves for gas burners and gas burning appliances
12/27/2023 - PDF - English - AENOR
Learn More€106.80 -
€85.00
-
€102.00
-
UNE-EN 16678:2023
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
12/20/2023 - PDF - Spanish - AENOR
Learn More€95.00 -
UNE-EN 16678:2023
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
12/20/2023 - PDF - English - AENOR
Learn More€114.00 -
UNE-EN 12729:2023
Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
11/29/2023 - PDF - Spanish - AENOR
Learn More€77.00 -
UNE-EN 12729:2023
Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
11/29/2023 - PDF - English - AENOR
Learn More€92.40 -
UNE-EN 14433:2023
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves
11/29/2023 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN 14433:2023
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves
11/29/2023 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN 12067-2:2023
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control/supervision of the electronic type
9/27/2023 - PDF - Spanish - AENOR
Learn More€124.00 -
UNE-EN 12067-2:2023
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control/supervision of the electronic type
9/27/2023 - PDF - English - AENOR
Learn More€148.80 -
UNE-EN 88-1:2023
Safety and control devices for gas burners and gas burning appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
9/27/2023 - PDF - Spanish - AENOR
Learn More€104.00 -
UNE-EN 88-1:2023
Safety and control devices for gas burners and gas burning appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
9/27/2023 - PDF - English - AENOR
Learn More€124.80 -
UNE-EN 88-2:2023
Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
9/27/2023 - PDF - Spanish - AENOR
Learn More€111.00 -
UNE-EN 88-2:2023
Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
9/27/2023 - PDF - English - AENOR
Learn More€133.20 -
UNE-EN 88-3:2023
Safety and control devices for gas burners and gas burning appliances - Part 3: Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types
9/27/2023 - PDF - Spanish - AENOR
Learn More€97.00 -
UNE-EN 88-3:2023
Safety and control devices for gas burners and gas burning appliances - Part 3: Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types
9/27/2023 - PDF - English - AENOR
Learn More€116.40 -
UNE-EN 1854:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances
9/27/2023 - PDF - Spanish - AENOR
Learn More€105.00 -
UNE-EN 1854:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances
9/27/2023 - PDF - English - AENOR
Learn More€126.00 -
UNE-EN IEC 60534-1:2023
Industrial-process control valves - Part 1: Control valve terminology and general considerations (Endorsed by Asociación Española de Normalización in August of 2023.)
8/2/2023 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN ISO 10497:2023
Testing of valves - Fire type-testing requirements (ISO 10497:2022)
7/26/2023 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 10497:2023
Testing of valves - Fire type-testing requirements (ISO 10497:2022)
7/26/2023 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN 1643:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Valve proving systems for automatic shut-off valves
7/26/2023 - PDF - Spanish - AENOR
Learn More€92.00 -
UNE-EN 1643:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Valve proving systems for automatic shut-off valves
7/26/2023 - PDF - English - AENOR
Learn More€110.40 -
UNE-EN 15714-3:2023
Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
7/19/2023 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 15714-3:2023
Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
7/19/2023 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN 15714-6:2023
Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements
7/19/2023 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 15714-6:2023
Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements
7/19/2023 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 23632:2023
Industrial valves - Design validation-testing of valves (ISO 23632:2021)
7/12/2023 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 23632:2023
Industrial valves - Design validation-testing of valves (ISO 23632:2021)
7/12/2023 - PDF - English - AENOR
Learn More€81.60 -
UNE-CEN/TR 17924:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Guidance on hydrogen specific aspects (Endorsed by Asociación Española de Normalización in June of 2023.)
6/3/2023 - PDF - English - AENOR
Learn More€110.00 -
UNE-EN 12516-2:2016+A1:2023
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
3/8/2023 - PDF - Spanish - AENOR
Learn More€139.00 -
UNE-EN 12516-2:2016+A1:2023
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
3/8/2023 - PDF - English - AENOR
Learn More€166.80 -
UNE-EN 14912:2023
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
2/22/2023 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 14912:2023
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
2/22/2023 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 28921-1:2023
Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2022)
2/8/2023 - PDF - Spanish - AENOR
Learn More€78.00 -
UNE-EN ISO 28921-1:2023
Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2022)
2/8/2023 - PDF - English - AENOR
Learn More€93.60 -
UNE-EN 15714-5:2023
Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
2/8/2023 - PDF - Spanish - AENOR
Learn More€73.00 -
UNE-EN 15714-5:2023
Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
2/8/2023 - PDF - English - AENOR
Learn More€87.60 -
UNE-EN 558:2022
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
11/30/2022 - PDF - Spanish - AENOR
Learn More€95.00 -
UNE-EN 558:2022
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
11/30/2022 - PDF - English - AENOR
Learn More€114.00 -
UNE-EN 12952-10:2022
Water-tube boilers and auxiliary installations - Part 10: Requirements for safety devices against excessive pressure
11/2/2022 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN 12952-10:2022
Water-tube boilers and auxiliary installations - Part 10: Requirements for safety devices against excessive pressure
11/2/2022 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 22434:2022
Gas cylinders - Inspection and maintenance of valves (ISO 22434:2022)
10/26/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 22434:2022
Gas cylinders - Inspection and maintenance of valves (ISO 22434:2022)
10/26/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 13433:2022
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A
10/5/2022 - PDF - Spanish - AENOR
Learn More€73.00 -
UNE-EN 13433:2022
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A
10/5/2022 - PDF - English - AENOR
Learn More€87.60 -
UNE-EN 13434:2022
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, flow actuated - Family G, Type B
10/5/2022 - PDF - Spanish - AENOR
Learn More€73.00 -
UNE-EN 13434:2022
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, flow actuated - Family G, Type B
10/5/2022 - PDF - English - AENOR
Learn More€87.60 -
UNE-EN ISO 11114-5:2022
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO 11114-5:2022)
9/28/2022 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 11114-5:2022
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO 11114-5:2022)
9/28/2022 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 16119:2022
LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
9/7/2022 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 16119:2022
LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
9/7/2022 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 21922:2022
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)
7/13/2022 - PDF - Spanish - AENOR
Learn More€135.00 -
UNE-EN ISO 21922:2022
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)
7/13/2022 - PDF - English - AENOR
Learn More€162.00 -
UNE-EN 1555-4:2022
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
5/11/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 1555-4:2022
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
5/11/2022 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 14245:2022
Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2021)
4/13/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 14245:2022
Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2021)
4/13/2022 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN IEC 60534-4:2022
Industrial-process control valves - Part 4: Inspection and routine testing (Endorsed by Asociación Española de Normalización in March of 2022.)
3/1/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 13611:2020/AC:2021
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
12/7/2021 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 13611:2020/AC:2021
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
12/7/2021 - PDF - English - AENOR
Learn More€0.00 -
UNE-EN ISO 15995:2021
Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2021)
11/10/2021 - PDF - Spanish - AENOR
Learn More€78.00 -
UNE-EN ISO 15995:2021
Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2021)
11/10/2021 - PDF - English - AENOR
Learn More€93.60 -
UNE-EN ISO 16138:2007/A1:2021
Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1 (ISO 16138:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 16138:2007/A1:2021
Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1 (ISO 16138:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN ISO 21787:2007/A1:2021
Industrial valves - Globe valves of thermoplastics materials - Amendment 1 (ISO 21787:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 21787:2007/A1:2021
Industrial valves - Globe valves of thermoplastics materials - Amendment 1 (ISO 21787:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 16135:2007/A1:2021
Industrial valves - Ball valves of thermoplastics materials - Amendment 1 (ISO 16135:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 16135:2007/A1:2021
Industrial valves - Ball valves of thermoplastics materials - Amendment 1 (ISO 16135:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 16139:2007/A1:2021
Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO 16139:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 16139:2007/A1:2021
Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO 16139:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 16137:2007/A1:2021
Industrial valves - Check valves of thermoplastics materials - Amendment 1 (ISO 16137:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 16137:2007/A1:2021
Industrial valves - Check valves of thermoplastics materials - Amendment 1 (ISO 16137:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 16136:2007/A1:2021
Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO 16136:2006/Amd 1:2019)
11/3/2021 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 16136:2007/A1:2021
Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO 16136:2006/Amd 1:2019)
11/3/2021 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 22153:2021
Electric actuators for industrial valves - General requirements (ISO 22153:2020)
10/20/2021 - PDF - Spanish - AENOR
Learn More€78.00 -
UNE-EN ISO 22153:2021
Electric actuators for industrial valves - General requirements (ISO 22153:2020)
10/20/2021 - PDF - English - AENOR
Learn More€93.60 -
UNE-EN 13953:2021
LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
10/6/2021 - PDF - Spanish - AENOR
Learn More€69.00 -
UNE-EN 13953:2021
LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
10/6/2021 - PDF - English - AENOR
Learn More€82.80 -
UNE 60404-4:2021
Gaseous fuels. Regulation pressure and/or measurement packages with a maximum operating pressure up to 5 bar. Part 4: Regulation pressure and/or measurement packages for diaphragm gas meters
6/30/2021 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN 15096:2021
Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification
5/26/2021 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN 15096:2021
Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification
5/26/2021 - PDF - English - AENOR
Learn More€85.20 -
UNE-EN ISO 17871:2021
Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)
5/26/2021 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 17871:2021
Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)
5/26/2021 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 12569:2021
Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
5/12/2021 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN 12569:2021
Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
5/12/2021 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN 14451:2021
Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 10 to DN 50 inclusive - Family D, type A
4/28/2021 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN 14451:2021
Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 10 to DN 50 inclusive - Family D, type A
4/28/2021 - PDF - English - AENOR
Learn More€84.00 -
€68.00
-
€81.60
-
UNE-EN ISO 8659:2021
Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
3/24/2021 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 8659:2021
Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
3/24/2021 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN 334:2021
Gas pressure regulators for inlet pressure up to 10 MPa (100 bar)
3/24/2021 - PDF - Spanish - AENOR
Learn More€153.00 -
UNE-EN 334:2021
Gas pressure regulators for inlet pressure up to 10 MPa (100 bar)
3/24/2021 - PDF - English - AENOR
Learn More€183.60 -
UNE-EN 13175:2020+A1:2021
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
3/10/2021 - PDF - Spanish - AENOR
Learn More€97.00 -
UNE-EN 13175:2020+A1:2021
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
3/10/2021 - PDF - English - AENOR
Learn More€116.40 -
€68.00
-
€81.60
-
UNE 60402-1:2019/1M:2021
Pressure regulators for gas receiving installations with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,15 bar. Part 1: Regulators with an outlet MOP up to 0,10 bar with or without a low pressure cut-off safety valve with an equivalent flow rate up to 4,8 m3 (n)/h of air
3/3/2021 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE 60402-2:2019/1M:2021
Pressure regulators for gas receiving installations with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,15 bar. Part 2: Regulators for the second family gases, with an inlet MOP between 150 and 400 mbar and an outlet MOP up to 0,15 bar, with a low pressure cut-off safety valve, a high pressure cut-off safety valve and a relief valve for excess outlet pressure and with an equivalent flow rate up to 4,8 m3 (n)/h of air.
3/3/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE 60404-1:2015/1M:2021
Gaseous fuels. Regulation pressure and/or measurement packages with a maximum operating pressure up to 5 bar. Part 1: Packages to built in, attach or place in enclosures with an equivalent nominal volume of flow up to 100 m3 (n)/h of natural gas.
3/3/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE 60404-2:2010/1M:2021
Gaseous fuels. Regulation pressure and/or measurement packages with a maximum operating pressure up to 5 bar. Part 2: Regulation packages to place in small chest built in a public way with a nominal volume of flow equivalent up to 50 m3(n)/h of natural gas.
3/3/2021 - PDF - Spanish - AENOR
Learn More€25.00 -
UNE 60411:2019/1M:2021
Pressure regulators for gas receiving installations with a maximum inlet operating pressure (MOPe) greater than 0,4 bar and up to 5 bar and a maximum outlet operating pressure (MOPs) up to 0,4 bar.
2/24/2021 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN 14382:2021
Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar)
1/20/2021 - PDF - Spanish - AENOR
Learn More€126.00 -
UNE-EN 14382:2021
Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar)
1/20/2021 - PDF - English - AENOR
Learn More€151.20 -
UNE-EN 15202:2020
LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
7/15/2020 - PDF - Spanish - AENOR
Learn More€114.00 -
UNE-EN 15202:2020
LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
7/15/2020 - PDF - English - AENOR
Learn More€136.80 -
UNE-EN 13611:2020
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
2/19/2020 - PDF - Spanish - AENOR
Learn More€169.00 -
UNE-EN 13611:2020
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
2/19/2020 - PDF - English - AENOR
Learn More€202.80 -
UNE-EN 14071:2015+A1:2019
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
11/13/2019 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 14071:2015+A1:2019
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
11/13/2019 - PDF - English - AENOR
Learn More€88.80 -
UNE 60402-1:2019
Pressure regulators for gas receiving installations with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,15 bar. Part 1: Regulators with an outlet MOP up to 0,10 bar with or without a low pressure cut-off safety valve with an equivalent flow rate up to 4,8 m3 (n)/h of air
11/6/2019 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE 60402-2:2019
Pressure regulators for gas receiving installations with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,15 bar. Part 2: Regulators for the second family gases, with an inlet MOP between 150 and 400 mbar and an outlet MOP up to 0,15 bar, with a low pressure cut-off safety valve, a high pressure cut-off safety valve and a relief valve for excess outlet pressure and with an equivalent flow rate up to 4,8 m3 (n)/h of air.
11/6/2019 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE 60411:2019
Pressure regulators for gas receiving installations with a maximum inlet operating pressure (MOPe) greater than 0,4 bar and up to 5 bar and a maximum outlet operating pressure (MOPs) up to 0,4 bar.
11/6/2019 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN 488:2019
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€70.00 -
UNE-EN ISO 10524-1:2019
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
10/9/2019 - PDF - Spanish - AENOR
Learn More€88.00 -
UNE-EN ISO 10524-1:2019
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
10/9/2019 - PDF - English - AENOR
Learn More€105.60 -
UNE-EN ISO 10524-2:2019
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
10/9/2019 - PDF - Spanish - AENOR
Learn More€84.00 -
UNE-EN ISO 10524-2:2019
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
10/9/2019 - PDF - English - AENOR
Learn More€100.80 -
UNE-EN ISO 10524-3:2019
Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019)
10/9/2019 - PDF - Spanish - AENOR
Learn More€101.00 -
UNE-EN ISO 10524-3:2019
Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019)
10/9/2019 - PDF - English - AENOR
Learn More€121.20 -
UNE 60718:2017/2M:2019
Hand operated metallic ball valves, with or without flow and/or temperature limiter, for installations using gaseous fuels with a maximum operation pressure (MOP) up to 0,5 MPa (5 bar). Dimensions and locking systems.
9/25/2019 - PDF - Spanish - AENOR
Learn More€25.00 -
UNE-EN 14596:2019
Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
6/19/2019 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 14596:2019
Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
6/19/2019 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 17110:2019
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve
6/19/2019 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 17110:2019
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve
6/19/2019 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN IEC 60534-3-1:2019
Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 12516-4:2016+A1:2019
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
4/10/2019 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 12516-4:2016+A1:2019
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
4/10/2019 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 736-1:2019
Valves - Terminology - Part 1: Definition of types of valves
2/20/2019 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN 736-1:2019
Valves - Terminology - Part 1: Definition of types of valves
2/20/2019 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN 12516-1:2016+A1:2019
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
2/13/2019 - PDF - Spanish - AENOR
Learn More€182.00 -
UNE-EN 12516-1:2016+A1:2019
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
2/13/2019 - PDF - English - AENOR
Learn More€218.40 -
UNE-EN 16668:2016+A1:2018
Industrial valves - Requirements and testing for metallic valves as pressure accessories
9/19/2018 - PDF - Spanish - AENOR
Learn More€90.00 -
UNE-EN 16668:2016+A1:2018
Industrial valves - Requirements and testing for metallic valves as pressure accessories
9/19/2018 - PDF - English - AENOR
Learn More€108.00 -
UNE 60718:2017/1M:2018
Hand operated metallic ball valves, with or without flow and/or temperature limiter, for installations using gaseous fuels with a maximum operation pressure (MOP) up to 0,5 MPa (5 bar). Dimensions and locking systems.
7/11/2018 - PDF - Spanish - AENOR
Learn More€25.00 -
UNE-EN 593:2018
Industrial valves - Metallic butterfly valves for general purposes
5/3/2018 - PDF - Spanish - AENOR
Learn More€82.00 -
UNE-EN 593:2018
Industrial valves - Metallic butterfly valves for general purposes
5/3/2018 - PDF - English - AENOR
Learn More€98.40 -
€85.00
-
€102.00
-
€49.00
-
€58.80
-
UNE-EN ISO 28921-2:2018
Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
3/7/2018 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 28921-2:2018
Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
3/7/2018 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 5210:2018
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017)
2/28/2018 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 5210:2018
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017)
2/28/2018 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 5211:2018
Industrial valves - Part-turn actuator attachments (ISO 5211:2017)
2/28/2018 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 5211:2018
Industrial valves - Part-turn actuator attachments (ISO 5211:2017)
2/28/2018 - PDF - English - AENOR
Learn More€88.80 -
€58.00
-
€69.60
-
UNE-EN ISO 10297:2015/A1:2017
Gas cylinders - Cylinder valves - Specification and type testing - Amendment 1: Pressure drums and tubes (ISO 10297:2014/Amd 1:2017)
10/11/2017 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 10297:2015/A1:2017
Gas cylinders - Cylinder valves - Specification and type testing - Amendment 1: Pressure drums and tubes (ISO 10297:2014/Amd 1:2017)
10/11/2017 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 11114-4:2017
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
9/27/2017 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN ISO 11114-4:2017
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
9/27/2017 - PDF - English - AENOR
Learn More€85.20 -
UNE 60718:2017
Hand operated metallic ball valves, with or without flow and/or temperature limiter, for installations using gaseous fuels with a maximum operation pressure (MOP) up to 0,5 MPa (5 bar). Dimensions and locking systems.
9/13/2017 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 15848-1:2015/A1:2017
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1 (ISO 15848-1:2015/Amd 1:2017)
7/19/2017 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15848-1:2015/A1:2017
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1 (ISO 15848-1:2015/Amd 1:2017)
7/19/2017 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 16852:2017
Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
6/14/2017 - PDF - Spanish - AENOR
Learn More€112.00 -
UNE-EN ISO 16852:2017
Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
6/14/2017 - PDF - English - AENOR
Learn More€134.40 -
UNE-EN ISO 17292:2016
Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
11/8/2016 - PDF - Spanish - AENOR
Learn More€73.00 -
UNE-EN ISO 17292:2016
Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
11/8/2016 - PDF - English - AENOR
Learn More€87.60 -
UNE-EN 331:2016 (R2020)
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
10/5/2016 - PDF - Spanish - AENOR
Learn More€88.00 -
UNE-EN 331:2016 (R2020)
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
10/5/2016 - PDF - English - AENOR
Learn More€105.60 -
€52.00
-
UNE-EN 16678:2016
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
7/13/2016 - PDF - Spanish - AENOR
Learn More€87.00 -
UNE-EN 16678:2016
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
7/13/2016 - PDF - English - AENOR
Learn More€104.40 -
UNE-EN 88-1:2012+A1:2016
Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
7/6/2016 - PDF - Spanish - AENOR
Learn More€93.00 -
UNE-EN 88-1:2012+A1:2016
Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
7/6/2016 - PDF - English - AENOR
Learn More€111.60 -
UNE-EN 16722:2016 (R2021)
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
5/4/2016 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 16722:2016 (R2021)
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
5/4/2016 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 60534-2-3:2016
Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (Endorsed by AENOR in May of 2016.)
5/1/2016 - PDF - English - AENOR
Learn More€78.00 -
€53.00
-
€63.60
-
UNE-EN 736-2:2016 (R2021)
Valves - Terminology - Part 2: Definition of components of valves
4/13/2016 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN 736-2:2016 (R2021)
Valves - Terminology - Part 2: Definition of components of valves
4/13/2016 - PDF - English - AENOR
Learn More€75.60 -
UNE-CEN/TR 16793:2016
Guide for the selection, application and use of flame arresters (Endorsed by AENOR in March of 2016.)
3/1/2016 - PDF - English - AENOR
Learn More€74.00 -
€68.00
-
€81.60
-
UNE-EN 60534-8-4:2015
Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow (Endorsed by AENOR in January of 2016.)
1/1/2016 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 15848-1:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015)
11/25/2015 - PDF - Spanish - AENOR
Learn More€93.00 -
UNE-EN ISO 15848-1:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015)
11/25/2015 - PDF - English - AENOR
Learn More€111.60 -
UNE-EN 16631:2015
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Reconditioning requirements
11/4/2015 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN 16631:2015
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Reconditioning requirements
11/4/2015 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 17778:2015
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)
10/28/2015 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 17778:2015
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)
10/28/2015 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 15848-2:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2015)
10/21/2015 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15848-2:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2015)
10/21/2015 - PDF - English - AENOR
Learn More€55.20 -
UNE 60404-1:2015
Gaseous fuels. Regulation pressure and/or measurement packages with a maximum operating pressure up to 5 bar. Part 1: Packages to built in, attach or place in enclosures with an equivalent nominal volume of flow up to 100 m3 (n)/h of natural gas.
9/23/2015 - PDF - Spanish - AENOR
Learn More€86.00 -
UNE-EN 14161:2011+A1:2015
Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) (Endorsed by AENOR in June of 2015.)
6/1/2015 - PDF - English - AENOR
Learn More€126.00 -
UNE-EN 60534-2-1:2011/AC:2015
Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (Endorsed by AENOR in June of 2015.)
6/1/2015 - PDF - English - AENOR
Learn More€0.00