23.060.01 : Valves in general
-
BS EN 488:2019
District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene
11/4/2019 - PDF - English -
Learn More€250.00 -
UNE-EN 488:2019
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English -
Learn More€70.00 -
NF EN 488, E39-013 (10/2019)
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene
10/1/2019 - Paper - French -
Learn More€86.67 -
€180.00 -
DIN 30690-1:2019-05
Construction elements in the gas supply system - Part 1: Requirements for construction elements in gas supply systems.
5/1/2019 - PDF - German -
Learn More€92.62 -
UNE-EN IEC 60534-3-1:2019
Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (Endorsed by Asociación Española de Normalización in May of 2019.)
5/1/2019 - PDF - English -
Learn More€64.00 -
UNE-EN 12516-4:2016+A1:2019
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
4/10/2019 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 12516-4:2016+A1:2019
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
4/10/2019 - PDF - English -
Learn More€81.60 -
€58.00 -
€69.60
-
UNE-EN 12516-1:2016+A1:2019
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
2/13/2019 - PDF - Spanish -
Learn More€182.00 -
UNE-EN 12516-1:2016+A1:2019
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
2/13/2019 - PDF - English -
Learn More€218.40 -
MSS SP-148-2019
Low Pressure Flanged or Lugged Carbon Steel and Iron or Ductile Iron, Cast or Fabricated, Bonnetless, Knife Gate Valves without Liners
1/1/2019 - PDF sécurisé - English -
Learn More€118.00 -
€309.00 -
€63.00 -
DIN EN 12516-4:2018-11
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel, German version EN 12516-4:2014+A1:2018
11/1/2018 - PDF - German -
Learn More€79.72 -
DIN EN 12516-1:2018-11
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells, German version EN 12516-1:2014+A1:2018
11/1/2018 - PDF - German -
Learn More€322.52 -
NBN EN 12516-1:2014+A1:2018
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
10/30/2018 - PDF - German -
Learn More€205.00 -
NBN EN 12516-4:2014+A1:2018
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
10/30/2018 - PDF - English -
Learn More€121.00 -
NBN EN 12516-4:2014+A1:2018
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
10/30/2018 - PDF - French -
Learn More€121.00 -
NBN EN 12516-1:2014+A1:2018
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
10/30/2018 - PDF - English -
Learn More€205.00 -
NBN EN 12516-1:2014+A1:2018
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
10/30/2018 - PDF - French -
Learn More€205.00 -
NBN EN 12516-4:2014+A1:2018
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
10/30/2018 - PDF - German -
Learn More€121.00 -
BS EN 12516-1:2014+A1:2018
Industrial valves. Shell design strength Tabulation method for steel valve shells
10/12/2018 - PDF - English -
Learn More€449.00 -
BS EN 12516-4:2014+A1:2018
Industrial valves. Shell design strength Calculation method for valve shells manufactured in metallic materials other than steel
10/5/2018 - PDF - English -
Learn More€250.00 -
UNE-EN 16668:2016+A1:2018
Industrial valves - Requirements and testing for metallic valves as pressure accessories
9/19/2018 - PDF - English -
Learn More€108.00 -
UNE-EN 16668:2016+A1:2018
Industrial valves - Requirements and testing for metallic valves as pressure accessories
9/19/2018 - PDF - Spanish -
Learn More€90.00 -
NF EN 12516-4/IN1, E29-300-4/IN1 (09/2018)
Industrial valves - Shell design strength - Part 4 : calculation method for valve shells manufactured in metallic materials other than steel
9/1/2018 - Paper - French -
Learn More€23.00 -
NF EN 12516-4+A1, E29-300-4 (09/2018)
Industrial valves - Shell design strength - Part 4 : calculation method for valve shells manufactured in metallic materials other than steel
9/1/2018 - Paper - French -
Learn More€75.67 -
MSS SP-25-2018
Standard Marking System for Valves, Fittings, Flanges, and Unions
9/1/2018 - PDF sécurisé - English -
Learn More€195.00 -
NF EN 12516-1/IN1, E29-300-1/IN1 (09/2018)
Industrial valves - Shell design strength - Part 1 : tabulation method for steel valve shells
9/1/2018 - Paper - French -
Learn More€23.00 -
NF EN 12516-1+A1, E29-300-1 (09/2018)
Industrial valves - Shell design strength - Part 1 : tabulation method for steel valve shells
9/1/2018 - Paper - French -
Learn More€225.50 -
€151.00
-
BS EN 16668:2016+A1:2018
Industrial valves. Requirements and testing for metallic valves as pressure accessories
6/11/2018 - PDF - English -
Learn More€331.00 -
NF A32-060 (05/2018)
Foundry products - Cast steel and nickel alloy castings for pumps, valves and fittings (enclosures and internal components)
5/1/2018 - Paper - French -
Learn More€99.33 -
DIN EN 16668:2018-05
Industrial valves - Requirements and testing for metallic valves as pressure accessories, German version EN 16668:2016+A1:2018
5/1/2018 - PDF - German -
Learn More€115.33 -
DIN EN 16668:2018-05
Industrial valves - Requirements and testing for metallic valves as pressure accessories (includes Amendment :2018)
5/1/2018 - PDF - English -
Learn More€144.02 -
NF EN 16668+A1, E29-322 (05/2018)
Industrial valves - Requirements and testing for metallic valves as pressure accessories
5/1/2018 - Paper - French -
Learn More€104.67 -
DIN EN 736-1:2018-05
Valves - Terminology - Part 1: Definition of types of valves, German version EN 736-1:2018
5/1/2018 - PDF - German -
Learn More€52.90 -
€66.07
-
NBN EN 16668:2016+A1:2018
Industrial valves - Requirements and testing for metallic valves as pressure accessories
4/27/2018 - PDF - French -
Learn More€163.00 -
NBN EN 16668:2016+A1:2018
Industrial valves - Requirements and testing for metallic valves as pressure accessories
4/27/2018 - PDF - German -
Learn More€163.00 -
NBN EN 16668:2016+A1:2018
Industrial valves - Requirements and testing for metallic valves as pressure accessories
4/27/2018 - PDF - English -
Learn More€163.00 -
€102.00 -
€85.00
-
€58.00
-
€58.00
-
€58.00
-
€151.00
-
UNE-EN ISO 28921-2:2018
Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
3/7/2018 - PDF - Spanish -
Learn More€70.00 -
UNE-EN ISO 28921-2:2018
Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
3/7/2018 - PDF - English -
Learn More€84.00 -
UNE-EN ISO 5211:2018
Industrial valves - Part-turn actuator attachments (ISO 5211:2017)
2/28/2018 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 5210:2018
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017)
2/28/2018 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 5211:2018
Industrial valves - Part-turn actuator attachments (ISO 5211:2017)
2/28/2018 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 5210:2018
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017)
2/28/2018 - PDF - English -
Learn More€81.60 -
€58.00 -
€69.60
-
DIN EN 12627:2018-02
Industrial valves - Butt welding ends for steel valves, German version EN 12627:2017
2/1/2018 - PDF - German -
Learn More€52.90 -
€66.07
-
NF EN 736-1, E29-306-1 (02/2018)
Valves - Terminology - Part 1 : definition of types of valves
2/1/2018 - Paper - French -
Learn More€46.55 -
€58.00
-
€58.00
-
€58.00
-
€151.00
-
BS EN 1907:2017
Safety requirements for cableway installations designed to carry persons. Terminology
12/8/2017 - PDF - English -
Learn More€377.00 -
€46.55
-
DIN 3505:2017-10
Controllable backflow preventer with reduced pressure zone - Family B type A according to DIN EN 12729 for temporary connection to potable water supply installed outside of buildings
10/1/2017 - PDF - German -
Learn More€32.34 -
€137.85 -
DIN EN 816:2017-10
Sanitary tapware - Automatic shut-off valves PN 10, German version EN 816:2017
10/1/2017 - PDF - German -
Learn More€110.00 -
€163.00
-
€163.00
-
€163.00
-
€40.25 -
UNE-EN ISO 15848-1:2015/A1:2017
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1 (ISO 15848-1:2015/Amd 1:2017)
7/19/2017 - PDF - English -
Learn More€46.80 -
UNE-EN ISO 15848-1:2015/A1:2017
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1 (ISO 15848-1:2015/Amd 1:2017)
7/19/2017 - PDF - Spanish -
Learn More€39.00 -
DIN EN ISO 15848-1:2017-07
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015 + Amd.1:2017) (includes Amendment A1:2017)
7/1/2017 - PDF - English -
Learn More€164.95 -
DIN EN ISO 15848-1:2017-07
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015 + Amd.1:2017), German version EN ISO 15848-1:2015 + A1:2017
7/1/2017 - PDF - German -
Learn More€131.96 -
BS ISO 19240:2017
Industrial valves. Lined metal quarter turn and check valves for chemical process and related industries
6/28/2017 - PDF - English -
Learn More€180.00 -
NF EN ISO 15848-1/A1, E29-500-1/A1 (06/2017)
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1 : classification system and qualification procedures for type testing of valves - Amendment 1
6/1/2017 - Paper - French -
Learn More€25.67 -
ISO 19240:2017 (R2022)
Industrial valves
Lined metal quarter turn and check valves for chemical process and related industries
5/10/2017 - Paper - English -
Learn More€72.00 -
DIN EN ISO 28921-2:2017-05
Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015), German version EN ISO 28921-2:2017
5/1/2017 - PDF - German -
Learn More€85.79 -
NF EN ISO 28921-2, E29-490-2 (05/2017)
Industrial valves - Isolating valves for low-temperature applications - Part 2 : type testing
5/1/2017 - Paper - French -
Learn More€73.23 -
DIN EN ISO 28921-2:2017-05
Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
5/1/2017 - PDF - English -
Learn More€107.48 -
BS EN ISO 15848-1:2015+A1:2017
Industrial valves. Measurement, test and qualification procedures for fugitive emissions Classification system type testing of valves
4/30/2017 - PDF - English -
Learn More€348.00 -
NBN EN ISO 15848-1:2015/A1:2017
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1 (ISO 15848-1:2015/Amd 1:2017)
4/19/2017 - PDF - English -
Learn More€20.00 -
NBN EN ISO 15848-1:2015/A1:2017
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1 (ISO 15848-1:2015/Amd 1:2017)
4/19/2017 - PDF - French -
Learn More€20.00 -
NBN EN ISO 15848-1:2015/A1:2017
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves - Amendment 1 (ISO 15848-1:2015/Amd 1:2017)
4/19/2017 - PDF - German -
Learn More€20.00 -
MSS SP-96-2017
Terminology for Valves, Fittings, and Their Related Components
4/1/2017 - PDF sécurisé - English -
Learn More€186.00 -
BS EN ISO 28921-2:2017
Industrial valves. Isolating valves for low-temperature applications Type testing
3/31/2017 - PDF - English -
Learn More€250.00 -
NBN EN ISO 28921-2:2017
Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
3/22/2017 - PDF - English -
Learn More€89.00 -
NBN EN ISO 28921-2:2017
Industriearmaturen - Absperrventile für die Anwendung im Tieftemperaturbereich - Teil 2: Typprüfung (ISO 28921-2:2015)
3/22/2017 - PDF - German -
Learn More€89.00 -
NBN EN ISO 28921-2:2017
Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
3/22/2017 - PDF - French -
Learn More€89.00 -
ISO 15848-1:2015/Amd 1:2017
Industrial valves
Measurement, test and qualification procedures for fugitive emissions
3/3/2017 - Paper - English -
Learn More€21.00 -
ISO 15848-1:2015/Amd 1:2017
Industrial valves
Measurement, test and qualification procedures for fugitive emissions
3/3/2017 - Paper - French -
Learn More€21.00 -
€37.00
-
€37.00
-
€37.00
-
€48.00
-
€48.00
-
16/30348709 DC:2016
BS EN 17070. Industrial valves. Minimum performance requirements
12/1/2016 - PDF - English -
Learn More€24.00 -
€52.00 -
16/30341108 DC:2016
BS EN ISO 15848-1 AMD1. Industrial valves. Measurement, test and qualification procedures for fugitive emissions. Part 1. Classification system and qualification procedures for type testing of valves
6/9/2016 - PDF - English -
Learn More€24.00 -
DIN EN 736-2:2016-06
Valves - Terminology - Part 2: Definition of components of valves
6/1/2016 - PDF - English -
Learn More€91.12 -
DIN EN 736-2:2016-06
Valves - Terminology - Part 2: Definition of components of valves, German version EN 736-2:2016
6/1/2016 - PDF - German -
Learn More€72.80 -
€180.00
-
UNE-EN 16722:2016 (R2021)
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
5/4/2016 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 16722:2016 (R2021)
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
5/4/2016 - PDF - English -
Learn More€81.60 -
€63.60 -
€53.00
-
UNE-EN 736-2:2016 (R2021)
Valves - Terminology - Part 2: Definition of components of valves
4/13/2016 - PDF - English -
Learn More€75.60 -
UNE-EN 736-2:2016 (R2021)
Valves - Terminology - Part 2: Definition of components of valves
4/13/2016 - PDF - Spanish -
Learn More€63.00 -
NBN EN 736-2:2016
Valves - Terminology - Part 2: Definition of components of valves
2/26/2016 - PDF - German -
Learn More€89.00 -
NBN EN 736-2:2016
Valves - Terminology - Part 2: Definition of components of valves
2/26/2016 - PDF - English -
Learn More€89.00 -
NBN EN 736-2:2016
Valves - Terminology - Part 2: Definition of components of valves
2/26/2016 - PDF - French -
Learn More€89.00 -
VG 85002:2016-02
Marking of fittings for pipelines, Text in German and English
2/1/2016 - PDF - English, German -
Learn More€52.90 -
DVGW W 570-1-B2:2016-02
2. Beiblatt zur Prüfgrundlage W 570-1 Armaturen für die Trinkwasser-Installation - Teil 1: Anforderungen und Prüfungen für Gebäudearmaturen
2/1/2016 - PDF - German -
Learn More€43.76 -
€270.00 -
DIN EN 16722:2015-12
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
12/1/2015 - PDF - English -
Learn More€91.12 -
DIN EN 16722:2015-12
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends, German version EN 16722:2015
12/1/2015 - PDF - German -
Learn More€72.80 -
NBN EN 16722:2015
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
11/30/2015 - PDF - German -
Learn More€121.00 -
NBN EN 16722:2015
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
11/30/2015 - PDF - English -
Learn More€121.00 -
NBN EN 16722:2015
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends
11/30/2015 - PDF - French -
Learn More€121.00 -
UNE-EN ISO 15848-1:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015)
11/25/2015 - PDF - Spanish -
Learn More€93.00 -
UNE-EN ISO 15848-1:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015)
11/25/2015 - PDF - English -
Learn More€111.60 -
ISO 28921-2:2015 (R2020)
Industrial valves
Isolating valves for low-temperature applications
11/5/2015 - Paper - French -
Learn More€110.00 -
ISO 28921-2:2015 (R2020)
Industrial valves
Isolating valves for low-temperature applications
11/5/2015 - Paper - English -
Learn More€110.00 -
UNE-EN 16631:2015
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Reconditioning requirements
11/4/2015 - PDF - Spanish -
Learn More€58.00 -
UNE-EN 16631:2015
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Reconditioning requirements
11/4/2015 - PDF - English -
Learn More€69.60 -
DIN EN ISO 15848-2:2015-11
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2015), German version EN ISO 15848-2:2015
11/1/2015 - PDF - German -
Learn More€45.98 -
DIN EN ISO 15848-2:2015-11
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2015)
11/1/2015 - PDF - English -
Learn More€57.57 -
BS EN 16722:2015
Industrial valves. End-to-end and centre-to-end dimensions for valves with threaded ends
10/31/2015 - PDF - English -
Learn More€250.00 -
UNE-EN ISO 17778:2015
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)
10/28/2015 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 17778:2015
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)
10/28/2015 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 15848-2:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2015)
10/21/2015 - PDF - English -
Learn More€55.20 -
UNE-EN ISO 15848-2:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2015)
10/21/2015 - PDF - Spanish -
Learn More€46.00 -
DVGW W 570-1-B1:2015-08
1. Beiblatt zur Prüfgrundlage W 570-1 Armaturen für die Trinkwasser-Installation - Teil 1: Anforderungen und Prüfungen für Gebäudearmaturen
8/1/2015 - PDF - German -
Learn More€43.76 -
€250.00
-
NBN EN ISO 15848-1:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015)
7/24/2015 - PDF - English -
Learn More€163.00 -
NBN EN ISO 15848-2:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2015)
7/24/2015 - PDF - English -
Learn More€37.00 -
NBN EN ISO 15848-1:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015)
7/24/2015 - PDF - French -
Learn More€163.00 -
NBN EN ISO 15848-2:2015
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2015)
7/24/2015 - PDF - French -
Learn More€37.00 -
BS EN ISO 15848-2:2015
Industrial valves. Measurement, test and qualification procedures for fugitive emissions Production acceptance of valves
6/30/2015 - PDF - English -
Learn More€151.00 -
€110.00
-
ISO 15848-1:2015 (R2020)
Industrial valves
Measurement, test and qualification procedures for fugitive emissions
6/1/2015 - Paper - French -
Learn More€199.00 -
UNE-EN 14161:2011+A1:2015
Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) (Endorsed by AENOR in June of 2015.)
6/1/2015 - PDF - English -
Learn More€126.00 -
ISO 15848-1:2015 (R2020)
Industrial valves
Measurement, test and qualification procedures for fugitive emissions
6/1/2015 - Paper - English -
Learn More€199.00 -
ISO 15848-2:2015 (R2020)
Industrial valves
Measurement, test and qualification procedures for fugitive emissions
6/1/2015 - Paper - French -
Learn More€48.00 -
DIN EN ISO 17778:2015-06
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015), German version EN ISO 17778:2015
6/1/2015 - PDF - German -
Learn More€45.98 -
ISO 15848-2:2015 (R2020)
Industrial valves
Measurement, test and qualification procedures for fugitive emissions
6/1/2015 - Paper - English -
Learn More€48.00 -
DIN EN ISO 17778:2015-06
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)
6/1/2015 - PDF - English -
Learn More€57.57 -
NBN EN ISO 17778:2015
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)
5/22/2015 - PDF - French -
Learn More€37.00 -
NBN EN ISO 17778:2015
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)
5/22/2015 - PDF - English -
Learn More€37.00 -
BS EN ISO 17778:2015
Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships
3/31/2015 - PDF - English -
Learn More€151.00 -
VG 85081:2015-03
Operating elements for fittings - Survey, Text in German and English
3/1/2015 - PDF - English, German -
Learn More€52.90 -
€32.50
-
€32.50
-
UNE-EN 14141:2014 (R2019)
Valves for natural gas transportation in pipelines - Performance requirements and tests
9/10/2014 - PDF - Spanish -
Learn More€89.00 -
UNE-EN 14141:2014 (R2019)
Valves for natural gas transportation in pipelines - Performance requirements and tests
9/10/2014 - PDF - English -
Learn More€106.80 -
VG 85068:2014-06
Pointerpins for pipelines valves, Text in German and English
6/1/2014 - PDF - English, German -
Learn More€45.98 -
VG 85065-2:2014-06
Flanged slide valves made of CC480K (CuSn10-C-GS) - Keys - Part 2: DN 100 to DN 300, Text in German and English
6/1/2014 - PDF - English, German -
Learn More€52.90 -
VG 85067:2014-06
Pointer for pipeline valves, Text in German and English
6/1/2014 - PDF - English, German -
Learn More€45.98 -
€45.98
-
€270.00 -
UNE-EN 13774:2013 (R2018)
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
11/20/2013 - PDF - English -
Learn More€88.80 -
UNE-EN 13774:2013 (R2018)
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
11/20/2013 - PDF - Spanish -
Learn More€74.00 -
BS EN 61514-2:2013
Industrial process control systems Methods of evaluating the performance intelligent valve positioners with pneumatic outputs mounted on an actuator assembly
10/31/2013 - PDF - English -
Learn More€293.00 -
NBN EN 14141:2013
Valves for natural gas transportation in pipelines - Performance requirements and tests
8/21/2013 - PDF - French -
Learn More€163.00 -
NBN EN 14141:2013
Valves for natural gas transportation in pipelines - Performance requirements and tests
8/21/2013 - PDF - German -
Learn More€163.00 -
NBN EN 14141:2013
Valves for natural gas transportation in pipelines - Performance requirements and tests
8/21/2013 - PDF - English -
Learn More€163.00 -
DIN EN 14141:2013-08
Valves for natural gas transportation in pipelines - Performance requirements and tests, German version EN 14141:2013
8/1/2013 - PDF - German -
Learn More€115.33 -
DIN EN 14141:2013-08
Valves for natural gas transportation in pipelines - Performance requirements and tests
8/1/2013 - PDF - English -
Learn More€144.02 -
BS EN 14141:2013
Valves for natural gas transportation in pipelines. Performance requirements and tests
6/30/2013 - PDF - English -
Learn More€331.00 -
€32.50
-
€0.00
-
DIN EN 13774:2013-05
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements, German version EN 13774:2013
5/1/2013 - PDF - German -
Learn More€99.35 -
DIN EN 13774:2013-05
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
5/1/2013 - PDF - English -
Learn More€124.21 -
NBN EN 13774:2013
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
4/26/2013 - PDF - German -
Learn More€142.00 -
NBN EN 13774:2013
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
4/26/2013 - PDF - English -
Learn More€142.00 -
NBN EN 13774:2013
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
4/26/2013 - PDF - French -
Learn More€142.00 -
€0.00
-
BS EN 13774:2013
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
3/31/2013 - PDF - English -
Learn More€293.00 -
UNE-EN 12266-1:2013 (R2018)
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
1/16/2013 - PDF - English -
Learn More€75.60 -
UNE-EN 12266-2:2013 (R2018)
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
1/16/2013 - PDF - English -
Learn More€75.60 -
UNE-EN 12266-1:2013 (R2018)
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
1/16/2013 - PDF - French -
Learn More€75.60 -
UNE-EN 12266-1:2013 (R2018)
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
1/16/2013 - PDF - Spanish -
Learn More€63.00 -
UNE-EN 12266-2:2013 (R2018)
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
1/16/2013 - PDF - Spanish -
Learn More€63.00 -
MSS SP-145-2013
Metal Ball Valves for Low Pressure/Low Temperature Plumbing Applications
1/1/2013 - PDF sécurisé - English -
Learn More€146.00 -
UNE-EN 1267:2012 (R2018)
Industrial valves - Test of flow resistance using water as test fluid
12/19/2012 - PDF - English -
Learn More€88.80 -
UNE-EN 1267:2012 (R2018)
Industrial valves - Test of flow resistance using water as test fluid
12/19/2012 - PDF - Spanish -
Learn More€74.00 -
UNE-EN 12201-4:2012
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
6/13/2012 - PDF - English -
Learn More€81.60 -
UNE-EN 12201-4:2012
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
6/13/2012 - PDF - Spanish -
Learn More€68.00 -
DIN EN 12266-1:2012-06
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements, German version EN 12266-1:2012
6/1/2012 - PDF - German -
Learn More€72.80 -
DIN EN 12266-1:2012-06
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
6/1/2012 - PDF - English -
Learn More€91.12 -
€151.00 -
NBN EN 12266-1:2012
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
5/25/2012 - PDF - German -
Learn More€89.00 -
NBN EN 12266-1:2012
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
5/25/2012 - PDF - English -
Learn More€89.00 -
NBN EN 12266-1:2012
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
5/25/2012 - PDF - French -
Learn More€89.00 -
BS EN 12266-1:2012
Industrial valves. Testing of metallic valves Pressure tests, test procedures and acceptance criteria. Mandatory requirements
4/30/2012 - PDF - English -
Learn More€180.00 -
DIN EN 1267:2012-04
Industrial valves - Test of flow resistance using water as test fluid, German version EN 1267:2012
4/1/2012 - PDF - German -
Learn More€99.35 -
DIN EN 12201-4:2012-04
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
4/1/2012 - PDF - English -
Learn More€91.12
