23.040 : Pipeline components and pipelines
-
UNE-CEN/TS 14632:2023
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in November of 2023.)
11/3/2023 - PDF - English - AENOR
Learn More€76.00 -
NF EN 13480-4/A1, E86-700-4/A1 (11/2023)
Tuyauteries industrielles métalliques - Partie 4 : fabrication et installation
11/1/2023 - Paper - French - AFNOR
Learn More€31.00 -
NF EN 13480-4/A2, E86-700-4/A2 (11/2023)
Metallic industrial piping - Part 4 : Fabrication and installation
11/1/2023 - Paper - French - AFNOR
Learn More€31.00 -
DIN EN 13480-3/A5:2023-04
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A5:2022
4/1/2023 - PDF - German - DIN
Learn More€79.72 -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
1/18/2023 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
1/18/2023 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
1/18/2023 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
1/18/2023 - PDF - English - AENOR
Learn More€55.20 -
NF EN 13480-3V1/A5, E86-700-3/A5 (12/2022)
Tuyauteries industrielles métalliques - Partie 3 : conception et calcul
12/1/2022 - Paper - French - AFNOR
Learn More€78.50 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - English - AENOR
Learn More€88.80 -
UNE-CEN/TS 17152-3:2022
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme (Endorsed by Asociación Española de Normalización in January of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 13480-3:2017/A5:2022
Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€69.00 -
UNE-CEN/TS 14541-2:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 2: Recommendations for relevant characteristics (Endorsed by Asociación Española de Normalización in July of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€65.00 -
UNE-CEN ISO/TS 23818-2:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-CEN ISO/TS 23818-3:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material (ISO/TS 23818-3:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€68.00 -
UNE-CEN ISO/TS 23818-1:2020
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 1: Polyethylene (PE) material (ISO/TS 23818-1:2020) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€95.00 -
UNE-EN ISO 21003-3:2009/A1:2022
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 21003-3:2009/A1:2022
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
9/28/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 22391-3:2010/A2:2022
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 22391-3:2010/A2:2022
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€69.60 -
NBN ISO 9624:2019/A1:2022
Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions — Amendment 1 ISO 9624:2019/Amd 1:2021
6/13/2022 - PDF - English - NBN
Learn More€20.00 -
NF EN ISO 15874-1/A1, T54-938-1/A1 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : General - Amendment 1 : Impact test (ISO 15874-1:2013/DAM 1:2021)
6/1/2022 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 15874-2/A2, T54-938-2/A2 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : Pipes - Amendement 2 : Impact test (ISO 15874-2:2013/DAM 2:2021)
6/1/2022 - Paper - French - AFNOR
Learn More€48.00 -
UNE-CEN/TS 1555-7:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2022.)
4/1/2022 - PDF - English - AENOR
Learn More€78.00 -
UNE-CEN/TS 13598-3:2021
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Assessment of conformity (Endorsed by Asociación Española de Normalización in February of 2022.)
2/1/2022 - PDF - English - AENOR
Learn More€78.00 -
DIN EN 13480-2/A8:2021-12
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A8:2021
12/1/2021 - PDF - German - DIN
Learn More€45.98 -
DIN EN 13480-5/A2:2021-12
Metallic industrial piping - Part 5: Inspection and testing, German version EN 13480-5:2017/A2:2021
12/1/2021 - PDF - German - DIN
Learn More€39.35 -
DVS 2205-1 Beiblatt 1:2021-12
Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyethylene material group
12/1/2021 - PDF - German - DVS
Learn More€56.95 -
VdTÜV WB 399/3 Supplement:2021-11
Unlegierter Stahl C 21, Werkstoff-Nr. 1.0432 Hersteller: Stabstahl, Schmiedestück, Flansch, Ring
11/30/2021 - PDF - German - VDTUV
Learn More€25.00 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - English - AENOR
Learn More€62.40 -
DIN EN 13480-3/A4:2021-11
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A4:2021
11/1/2021 - PDF - German - DIN
Learn More€45.98 -
UNE-EN 13480-3:2017/A4:2021
Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in November of 2021.)
11/1/2021 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 13480-2:2017/A8:2021
Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in November of 2021.)
11/1/2021 - PDF - English - AENOR
Learn More€38.00 -
UNE-EN 13480-5:2017/A2:2021
Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in November of 2021.)
11/1/2021 - PDF - English - AENOR
Learn More€28.00 -
€48.00
-
NF EN 13480-5/A2, E86-700-5/A2 (10/2021)
Metallic industrial piping - Part 5 : Inspection and testing
10/1/2021 - Paper - French - AFNOR
Learn More€31.00 -
NF EN ISO 15877-3/A2, T54-014-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3 : Fittings - Amendment 2
10/1/2021 - Paper - French - AFNOR
Learn More€75.67 -
NF EN ISO 15874-3/A2, T54-938-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : Fittings - Amendment 2 (ISO 15874-3:2013/DAM 2:2020)
10/1/2021 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 15875-3/A2, T54-943-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3 : Fittings - Amendment 2 (ISO 15875-3:2003/DAM 2:2020)
10/1/2021 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 22391-3/A2, T54-982-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : Fittings - Amendment 2
10/1/2021 - Paper - French - AFNOR
Learn More€60.67 -
NF EN ISO 15876-3/A2, T54-944-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : Fittings - Amendment 2 (ISO 15876-3:2017/DAM 2:2020)
10/1/2021 - Paper - French - AFNOR
Learn More€43.50 -
NF EN ISO 21003-3/A1, T54-952-3/A1 (10/2021)
Multilayer piping systems for hot and cold water installations inside buildings - Part 3 : Fittings - Amendment 1 (ISO 21003-3:2008/DAM 1:2020)
10/1/2021 - Paper - French - AFNOR
Learn More€48.00 -
UNE-EN ISO 15494:2019/A1:2021
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15494:2019/A1:2021
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15875-5:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 15875-5:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN ISO 15877-2:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15877-2:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15877-5:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15877-5:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
9/29/2021 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN ISO 22391-2:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 22391-2:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 22391-3:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 22391-3:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 22391-5:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
9/29/2021 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 22391-5:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
9/29/2021 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN ISO 15875-2:2004/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 15875-2:2004/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
9/29/2021 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15876-5:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15876-5:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15875-3:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15875-3:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15876-2:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15876-2:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
NF EN 13480-3 V1/A4, E86-700-3/A4 (09/2021)
Metallic industrial piping - Part 3 : Design and calculation
9/1/2021 - Paper - French - AFNOR
Learn More€34.67 -
UNE-CEN/TS 1046:2021
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation (Endorsed by Asociación Española de Normalización in September of 2021.)
9/1/2021 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 13480-3:2017/A1:2021
Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in June of 2021.)
6/1/2021 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN ISO 10893-9:2011/A1:2021
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-9:2011/A1:2021
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-10:2011/A1:2021
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-10:2011/A1:2021
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-11:2011/A1:2021
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-11:2011/A1:2021
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
DIN EN 13480-3/A1:2021-05
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A1:2021
5/1/2021 - PDF - German - DIN
Learn More€72.80 -
UNE-CEN/TS 12007-6:2021
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 6: Specific functional recommendations for unplasticized polyamide (PA-U) (Endorsed by Asociación Española de Normalización in May of 2021.)
5/1/2021 - PDF - English - AENOR
Learn More€70.00 -
NF EN ISO 11296-4/A1, P16-364-4/A1 (05/2021)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes - Amendment 1 : updated definitions, marking requirements and procedure for alternative expression of flexural test results - Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 4 : Tubage continu par tubes polymérisés sur place - AMENDEMENT 1 : Actualisation des définitions, des exigences de marquage, et de la procédure
5/1/2021 - Paper - French - AFNOR
Learn More€48.00 -
UNE-CEN/TR 1591-2:2021 IN
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
4/14/2021 - PDF - Spanish - AENOR
Learn More€84.00 -
UNE-CEN/TR 1591-2:2021 IN
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
4/14/2021 - PDF - English - AENOR
Learn More€100.80 -
UNE-EN ISO 10893-1:2011/A1:2021
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-1:2011/A1:2021
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-2:2011/A1:2021
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-2:2011/A1:2021
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-3:2011/A2:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-3:2011/A2:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-8:2011/A1:2021
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-8:2011/A1:2021
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-12:2011/A1:2021
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-12:2011/A1:2021
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
NF EN 13480-3 V1/A1, E86-700-3/A1 (03/2021)
Metallic industrial piping - Part 3 : design and calculation
3/1/2021 - Paper - French - AFNOR
Learn More€68.50 -
UNE-CEN/TS 1329-2:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in March of 2021.)
3/1/2021 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN ISO 10893-3:2011/A1:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
2/17/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-3:2011/A1:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
2/17/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 21809-3:2016/A1:2021
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings - Amendment 1: Introduction of mesh-backed coating systems (ISO 21809-3:2016/Amd 1:2020)
1/27/2021 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 21809-3:2016/A1:2021
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings - Amendment 1: Introduction of mesh-backed coating systems (ISO 21809-3:2016/Amd 1:2020)
1/27/2021 - PDF - English - AENOR
Learn More€63.60 -
DIN EN 13480-3/A2:2020-12
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A2:2020
12/1/2020 - PDF - German - DIN
Learn More€92.62 -
DIN EN 13480-3/A3:2020-12
Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A3:2020
12/1/2020 - PDF - German - DIN
Learn More€99.35 -
NF EN ISO 15875-2/A2, T54-943-2/A2 (12/2020)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2 : pipes - Amendment 2
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 15876-2/A1, T54-944-2/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2 : pipes - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 15876-5/A1, T54-944-5/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5 : fitness for purpose of the system - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 15877-2/A2, T54-014-2/A2 (12/2020)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2 : pipes - Amendment 2
12/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 15877-5/A2, T54-014-5/A2 (12/2020)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5 : fitness for purpose of the system - Amendment 2
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 22391-2/A1, T54-982-2/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2 : pipes - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 22391-3/A1, T54-982-3/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : fittings - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 22391-5/A1, T54-982-5/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5 : fitness for purpose of the system - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 15875-3/A1, T54-943-3/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3 : fittings - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 15875-5/A1, T54-943-5/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5 : fitness for purpose of the system - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 15876-3/A1, T54-944-3/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : fittings - Amendment 1
12/1/2020 - Paper - French - AFNOR
Learn More€25.50 -
NF EN ISO 15494/A1, T54-946/A1 (11/2020)
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 - Systèmes de canalisations en matières plastiques pour les applications industrielles - Polybutène (PB), polyéthylène (PE), polyéthylène de meilleure résistance à la température (PE-RT), polyéthylène réticulé (PE-X), polypropylène (PP) - Séries métriques pour les spécifications pour les composants
11/1/2020 - Paper - French - AFNOR
Learn More€25.50 -
NBN B 21-106:2004/A2:2020
Concrete pipes and fittings, unreinforced, steel fibre and reinforced - National supplement to NBN EN 1916:2002
9/23/2020 - PDF - French - NBN
Learn More€20.00 -
NBN B 21-106:2004/A2:2020
Concrete pipes and fittings, unreinforced, steel fibre and reinforced - National supplement to NBN EN 1916:2002
9/23/2020 - PDF - Dutch - NBN
Learn More€20.00 -
UNE-CEN/TS 1519-2:2020
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€66.00 -
UNE-CEN/TS 17176-7:2020
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€71.00 -
UNE-EN 13480-3:2017/A2:2020
Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 13480-3:2017/A3:2020
Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€72.00 -
NF EN 13480-3 V1/A2, E86-700-3/A2 (08/2020)
Metallic industrial piping - Part 3 : design and calculation
8/1/2020 - Paper - French - AFNOR
Learn More€23.00 -
NF EN 13480-3 V1/A3, E86-700-3/A3 (08/2020)
Metallic industrial piping - Part 3 : design and calculation
8/1/2020 - Paper - French - AFNOR
Learn More€90.00 -
NF EN ISO 10893-11/A1, A49-785-11/A1 (07/2020)
Non-destructive testing of steel tubes - Part 11 : automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency, change of acceptance criteria - Essais non destructifs des tubes en acier - Partie 11 : Contrôle automatisé par ultrasons du cordon de soudure des tubes en acier soudés pour la détection des imperfections longitudinales et/ou transversales - Amendement 1 : Modification de la fréquence ultrasonore d'essai des transducteurs -
7/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-9/A1, A49-785-9/A1 (07/2020)
Non-destructive testing of steel tubes - Part 9 : Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1 : change acceptance criteria - Essais non destructifs des tubes en acier - Partie 9 : Contrôle automatisé par ultrasons pour la détection des dédoublures dans les bandes/tôles utilisées pour la fabrication des tubes en acier soudés - Amendement 1 : Changement des critères d'acceptation
7/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-10/A1, A49-785-10/A1 (07/2020)
Non-destructive testing of steel tubes - Part 10 : automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency - change of acceptance criteria - Essais non destructifs des tubes en acier - Partie 10 : Contrôle automatisé par ultrasons sur toute la circonférence des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales - AMENDEMENT 1 :
7/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
DIN EN 13480-2/A7:2020-06
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A7:2020
6/1/2020 - PDF - German - DIN
Learn More€32.34 -
UNE-EN 13480-2:2017/A7:2020
Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in June of 2020.)
6/1/2020 - PDF - English - AENOR
Learn More€16.00 -
NF EN ISO 10893-12/A1, A49-785-12/A1 (06/2020)
Non-destructive testing of steel tubes - Part 12 : automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1 : change of acceptance criteria
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-1/A1, A49-785-1/A1 (06/2020)
Non-destructive testing of steel tubes - Part 1 : automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1 : change of dimensions of the reference notch , change acceptance criteria - Essais non destructifs des tubes en acier - Partie 1 : Contrôle automatisé électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1 : Changement de dimensions de l'entaille de référence,
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-2/A1, A49-785-2/A1 (06/2020)
Non-destructive testing of steel tubes - Part 2 : automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1 : change of dimensions of the reference notch, change acceptance criteria - Essais non destructifs des tubes en acier - Partie 2 : Contrôle automatisé par courants de Foucault pour la détection des imperfections des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1 : Changement de dimensions de l'entaille de référence,
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-8/A1, A49-785-8/A1 (06/2020)
Non-destructive testing of steel tubes - Part 8 : automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1 : change acceptance criteria
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-3/A2, A49-785-3/A2 (06/2020)
Non-destructive testing of steel tubes - Part 3 : automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections - Amendment 2 : change acceptance criteria - Essais non destructifs des tubes en acier - Partie 3 : Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales -
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
€23.00
-
NF ISO 3601-1/A1, T47-501/A1 (01/2020)
Fluid power systems - O-rings - Part 1 : inside diameters, cross-sections, tolerances and designation codes - Amendment 1 - Transmissions hydrauliques et pneumatiques - Joints toriques - Partie 1 : diamètres intérieurs, sections, tolérances et code d'identification dimensionnelle - Amendement 1
1/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
UNE-CEN ISO/TS 21003-7:2019
Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity (ISO/TS 21003-7:2019) (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€78.00 -
UNE-EN ISO 7396-1:2016/A1:2019
Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1 (ISO 7396-1:2016/Amd 1:2017)
10/2/2019 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 7396-1:2016/A1:2019
Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1 (ISO 7396-1:2016/Amd 1:2017)
10/2/2019 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN 13480-1:2017/A1:2019
Metallic industrial piping - Part 1: General (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More€16.00 -
UNE-EN 13480-2:2017/A2:2018
Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 13480-2:2017/A3:2018
Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More€16.00 -
UNE-EN 13480-2:2017/A1:2018
Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More€42.00 -
UNE-EN 13480-5:2017/A1:2019
Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More€35.00 -
UNE-EN 13480-6:2017/A1:2019
Metallic industrial piping - Part 6: Additional requirements for buried piping (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More€24.00 -
DIN EN 13480-1/A1:2019-07
Metallic industrial piping - Part 1: General, German version EN 13480-1:2017/A1:2019
7/1/2019 - PDF - German - DIN
Learn More€32.34 -
DIN EN 13480-6/A1:2019-07
Metallic industrial piping - Part 6: Additional requirements for buried piping, German version EN 13480-6:2017/A1:2019
7/1/2019 - PDF - German - DIN
Learn More€39.35 -
DIN EN 13480-5/A1:2019-06
Metallic industrial piping - Part 5: Inspection and testing, German version EN 13480-5:2017/A1:2019
6/1/2019 - PDF - German - DIN
Learn More€39.35 -
NF EN 13480-6 V1/A1, E86-700-6/A1 (04/2019)
Metallic industrial piping - Part 6 : additional requirements for buried piping - Tuyauteries industrielles métalliques - Partie 6 : exigences complémentaires relatives aux tuyauteries enterrées
4/1/2019 - Paper - French - AFNOR
Learn More€23.00 -
€23.00
-
NF EN 13480-5 V1/A1, E86-700-5/A1 (03/2019)
Metallic industrial piping - Part 5 : inspection and testing
3/1/2019 - Paper - French - AFNOR
Learn More€31.00 -
UNE-CEN ISO/TS 15874-7:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
3/1/2019 - PDF - English - AENOR
Learn More€70.00 -
UNE-CEN ISO/TS 15876-7:2018
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
3/1/2019 - PDF - English - AENOR
Learn More€70.00 -
UNE-CEN ISO/TS 15877-7:2018
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
3/1/2019 - PDF - English - AENOR
Learn More€70.00 -
UNE-CEN ISO/TS 15875-7:2018
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
3/1/2019 - PDF - English - AENOR
Learn More€71.00 -
UNE-EN ISO 15874-2:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
12/26/2018 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15874-2:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
12/26/2018 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15874-3:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
12/26/2018 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 15874-3:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
12/26/2018 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15874-5:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
12/26/2018 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15874-5:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
12/26/2018 - PDF - English - AENOR
Learn More€55.20 -
DIN EN 13480-2/A1:2018-12
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A1:2018
12/1/2018 - PDF - German - DIN
Learn More€52.90 -
DIN EN 13480-2/A2:2018-12
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A2:2018
12/1/2018 - PDF - German - DIN
Learn More€39.35 -
DIN EN 13480-2/A3:2018-12
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A3:2018
12/1/2018 - PDF - German - DIN
Learn More€32.34 -
DIN 14811/A3:2018-12
Fire-fighting hoses - Non-percolating layflat delivery hoses and hose assemblies for pumps and vehicles, Amendment A3
12/1/2018 - PDF - German - DIN
Learn More€22.99 -
€23.00
-
€43.50
-
€31.00
-
NF EN ISO 15874-3/A1, T54-938-3/A1 (08/2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : fittings - Amendment 1
8/1/2018 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 15874-2/A1, T54-938-2/A1 (08/2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : pipes - Amendment 1
8/1/2018 - Paper - French - AFNOR
Learn More€25.50 -
NF EN ISO 15874-5/A1, T54-938-5/A1 (08/2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5 : fitness for purpose of the system - Amendment 1
8/1/2018 - Paper - French - AFNOR
Learn More€34.67 -
ISO 15874-2:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
6/25/2018 - Paper - French - ISO
Learn More€21.00 -
ISO 15874-5:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
6/25/2018 - Paper - French - ISO
Learn More€21.00 -
ISO 15874-3:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
6/25/2018 - Paper - French - ISO
Learn More€21.00 -
UNE 53367-1:2014/1M:2018
Plastics. Plastics piping systems for water supply for irrigation. Part 1: Specifications for polyethylene pipes
5/30/2018 - PDF - Spanish - AENOR
Learn More€17.00 -
ISO 49:1994/Amd 1:2018
Malleable cast iron fittings threaded to ISO 7-1
Amendment 1: Chemical composition of the zinc coating
4/24/2018 - Paper - English - ISO
Learn More€21.00 -
ISO 49:1994/Amd 1:2018
Malleable cast iron fittings threaded to ISO 7-1
Amendment 1: Chemical composition of the zinc coating
4/24/2018 - Paper - French - ISO
Learn More€21.00 -
UNE-CEN/TR 17179:2018
Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for underground installation (Endorsed by Asociación Española de Normalización in April of 2018.)
4/1/2018 - PDF - English - AENOR
Learn More€65.00 -
UNE-CEN/TS 15223:2017
Plastics piping systems - Validated design parameters of buried thermoplastics piping systems (Endorsed by Asociación Española de Normalización in January of 2018.)
1/1/2018 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN ISO 13260:2012/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
12/5/2017 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 13260:2012/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
12/5/2017 - PDF - English - AENOR
Learn More€40.80 -
€25.00
-
JIS G 3468/AMENDMENT 1:2017
Large diameter welded stainless steel pipes (Amendment 1)
10/20/2017 - PDF - Japanese - JSA
Learn More€25.00 -
UNE-CEN/TR 13480-7:2017
Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures (Endorsed by Asociación Española de Normalización in October of 2017.)
10/1/2017 - PDF - English - AENOR
Learn More€68.00 -
NF EN ISO 13260/A1, P16-360/A1 (09/2017)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1
9/1/2017 - Paper - French - AFNOR
Learn More€25.50 -
ISO 13260:2010/Amd 1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage
Test method for resistance to combined temperature cycling and external loading
8/11/2017 - Paper - French - ISO
Learn More€21.00 -
UNE-CEN/TS 1453-2:2017 (R2020)
Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
7/26/2017 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-CEN/TS 1453-2:2017 (R2020)
Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
7/26/2017 - PDF - English - AENOR
Learn More€81.60 -
NF ISO 12151-1/A1, E48-079-1/A1 (05/2017)
Connections for hydraulic fluid power and general use - Hose fittings - Part 1 : hose fittings with ISO 8434-3 O-ring face seal ends - Amendment 1
5/1/2017 - Paper - French - AFNOR
Learn More€25.67 -
UNE-EN ISO 15493:2004/A1:2017
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)
4/26/2017 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15493:2004/A1:2017
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)
4/26/2017 - PDF - English - AENOR
Learn More€55.20 -
UNE-CEN/TS 12200-2:2017 (R2020)
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2017.)
4/1/2017 - PDF - English - AENOR
Learn More€65.00 -
NF EN ISO 15493/A1, T54-947/A1 (04/2017)
Systèmes de canalisations en matières plastiques pour les applications industrielles - Acrylonitrile-butadiène-styrène (ABS), poly(chlorure de vinyle) non plastifié (PVC-U) et poly(chlorure de vinyle) chloré (PVC-C) - Spécifications pour les composants et le système - Série métrique - Amendement 1
4/1/2017 - Paper - French - AFNOR
Learn More€31.00 -
ISO 12151-1:2010/Amd 1:2017
Connections for hydraulic fluid power and general use
Hose fittings
2/14/2017 - Paper - English - ISO
Learn More€21.00 -
ISO 12151-1:2010/Amd 1:2017
Connections for hydraulic fluid power and general use
Hose fittings
2/14/2017 - Paper - French - ISO
Learn More€21.00 -
ISO 15493:2003/Amd 1:2016
Plastics piping systems for industrial applications
Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)
12/14/2016 - Paper - English - ISO
Learn More€21.00