23.040 : Pipeline components and pipelines
-
ISO 11413:2019
Plastics pipes and fittings
Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
3/12/2019 - Paper - French - ISO
Learn More€72.00 -
ISO 11413:2019
Plastics pipes and fittings
Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
3/12/2019 - Paper - English - ISO
Learn More€72.00 -
ISO 6964:2019
Polyolefin pipes and fittings
Determination of carbon black content by calcination and pyrolysis
2/27/2019 - Paper - English - ISO
Learn More€72.00 -
ISO 10146:2019
Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX)
Effect of time and temperature on expected strength
2/26/2019 - Paper - English - ISO
Learn More€72.00 -
ISO 10893-6:2019
Non-destructive testing of steel tubes
Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
2/7/2019 - Paper - French - ISO
Learn More€110.00 -
ISO 10893-6:2019
Non-destructive testing of steel tubes
Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
2/7/2019 - Paper - English - ISO
Learn More€110.00 -
ISO 13257:2018
Thermoplastics piping systems for non-pressure applications
Test method for resistance to elevated temperature cycling
11/8/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 13257:2018
Thermoplastics piping systems for non-pressure applications
Test method for resistance to elevated temperature cycling
11/8/2018 - Paper - English - ISO
Learn More€72.00 -
ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks
Part 2: Lining with continuous pipes
10/26/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks
Part 2: Lining with continuous pipes
10/26/2018 - Paper - English - ISO
Learn More€72.00 -
ISO 6802:2018 (R2023)
Rubber or plastics hoses and hose assemblies
Hydraulic impulse test with flexing
9/12/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 6802:2018 (R2023)
Rubber or plastics hoses and hose assemblies
Hydraulic impulse test with flexing
9/12/2018 - Paper - English - ISO
Learn More€72.00 -
ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure
Part 3: Lining with close-fit pipes
8/31/2018 - Paper - French - ISO
Learn More€110.00 -
ISO 15874-2:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
6/25/2018 - Paper - French - ISO
Learn More€21.00 -
ISO 15874-5:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
6/25/2018 - Paper - French - ISO
Learn More€21.00 -
ISO 15874-3:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
6/25/2018 - Paper - French - ISO
Learn More€21.00 -
ISO 10471:2018
Glass-reinforced thermosetting plastics (GRP) pipes
Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
5/17/2018 - Paper - English - ISO
Learn More€72.00 -
ISO 49:1994/Amd 1:2018
Malleable cast iron fittings threaded to ISO 7-1
Amendment 1: Chemical composition of the zinc coating
4/24/2018 - Paper - English - ISO
Learn More€21.00 -
ISO 49:1994/Amd 1:2018
Malleable cast iron fittings threaded to ISO 7-1
Amendment 1: Chemical composition of the zinc coating
4/24/2018 - Paper - French - ISO
Learn More€21.00 -
ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 1: Replacement on the line by pipe bursting and pipe extraction
3/28/2018 - Paper - French - ISO
Learn More€110.00 -
ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 2: Replacement off the line by horizontal directional drilling and impact moling
3/28/2018 - Paper - French - ISO
Learn More€148.00 -
ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 1: Replacement on the line by pipe bursting and pipe extraction
3/28/2018 - Paper - English - ISO
Learn More€110.00 -
ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 2: Replacement off the line by horizontal directional drilling and impact moling
3/28/2018 - Paper - English - ISO
Learn More€148.00 -
€148.00
-
€148.00
-
ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure
Part 1: General
2/26/2018 - Paper - French - ISO
Learn More€110.00 -
ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks
Part 1: General
2/16/2018 - Paper - French - ISO
Learn More€110.00 -
ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure
Part 2: Lining with continuous pipes
1/24/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks
Part 2: Lining with continuous pipes
1/24/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks
Part 2: Lining with continuous pipes
1/24/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks
Part 2: Lining with continuous pipes
1/24/2018 - Paper - English - ISO
Learn More€72.00 -
€72.00
-
ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure
Part 4: Lining with cured-in-place pipes
1/11/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 161-1:2018 (R2023)
Thermoplastics pipes for the conveyance of fluids
Nominal outside diameters and nominal pressures
1/8/2018 - Paper - English - ISO
Learn More€48.00 -
ISO 11922-1:2018 (R2023)
Thermoplastics pipes for the conveyance of fluids
Dimensions and tolerances
1/8/2018 - Paper - English - ISO
Learn More€110.00 -
ISO 10804:2018 (R2023)
Restrained joint systems for ductile iron pipelines
Design rules and type testing
1/3/2018 - Paper - English - ISO
Learn More€48.00 -
ISO 10619-1:2017 (R2022)
Rubber and plastics hoses and tubing
Measurement of flexibility and stiffness
12/15/2017 - Paper - French - ISO
Learn More€72.00 -
ISO 10619-1:2017 (R2022)
Rubber and plastics hoses and tubing
Measurement of flexibility and stiffness
12/15/2017 - Paper - English - ISO
Learn More€72.00 -
ISO 10960:2017 (R2022)
Rubber and plastics hoses
Assessment of ozone resistance under dynamic conditions
12/5/2017 - Paper - French - ISO
Learn More€48.00 -
ISO 10960:2017 (R2022)
Rubber and plastics hoses
Assessment of ozone resistance under dynamic conditions
12/5/2017 - Paper - English - ISO
Learn More€48.00 -
ISO 21307:2017 (R2023)
Plastics pipes and fittings
Butt fusion jointing procedures for polyethylene (PE) piping systems
11/30/2017 - Paper - English - ISO
Learn More€110.00 -
ISO 13260:2010/Amd 1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage
Test method for resistance to combined temperature cycling and external loading
8/11/2017 - Paper - French - ISO
Learn More€21.00 -
ISO 8179-1:2017 (R2023)
Ductile iron pipes, fittings, accessories and their joints
External zinc-based coating
7/25/2017 - Paper - English - ISO
Learn More€72.00 -
ISO 8179-2:2017 (R2023)
Ductile iron pipes, fittings, accessories and their joints
External zinc-based coating
7/25/2017 - Paper - English - ISO
Learn More€72.00 -
ISO/TS 12512:2017 (R2021)
Glass reinforced thermosetting plastic (GRP) pipes
Determination of initial specific ring stiffness using segment test species cut from a pipe
7/19/2017 - Paper - English - ISO
Learn More€148.00 -
ISO 13761:2017 (R2023)
Plastics pipes and fittings
Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
7/18/2017 - Paper - English - ISO
Learn More€48.00 -
ISO 7510:2017 (R2022)
Plastics piping systems
Glass-reinforced plastics (GRP) components
6/28/2017 - Paper - English - ISO
Learn More€48.00 -
ISO 18468:2017 (R2023)
Ductile iron fittings, accessories and their joints and valves
Epoxy coating
6/15/2017 - Paper - English - ISO
Learn More€72.00 -
ISO/TS 20656-1:2017 (R2023)
Plastics piping systems
General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes
6/13/2017 - Paper - English - ISO
Learn More€148.00 -
ISO 6803:2017 (R2023)
Rubber or plastics hoses and hose assemblies
Hydraulic-pressure impulse test without flexing
3/2/2017 - Paper - French - ISO
Learn More€72.00 -
ISO 6803:2017 (R2023)
Rubber or plastics hoses and hose assemblies
Hydraulic-pressure impulse test without flexing
3/2/2017 - Paper - English - ISO
Learn More€72.00 -
ISO 12151-1:2010/Amd 1:2017
Connections for hydraulic fluid power and general use
Hose fittings
2/14/2017 - Paper - English - ISO
Learn More€21.00 -
ISO 12151-1:2010/Amd 1:2017
Connections for hydraulic fluid power and general use
Hose fittings
2/14/2017 - Paper - French - ISO
Learn More€21.00 -
ISO 15876-1:2017 (R2022)
Plastics piping systems for hot and cold water installations
Polybutene (PB)
1/10/2017 - Paper - French - ISO
Learn More€72.00 -
ISO 15876-2:2017 (R2022)
Plastics piping systems for hot and cold water installations
Polybutene (PB)
1/10/2017 - Paper - French - ISO
Learn More€110.00 -
ISO 15876-5:2017 (R2022)
Plastics piping systems for hot and cold water installations
Polybutene (PB)
1/10/2017 - Paper - French - ISO
Learn More€72.00 -
ISO 15876-3:2017 (R2022)
Plastics piping systems for hot and cold water installations
Polybutene (PB)
1/10/2017 - Paper - French - ISO
Learn More€110.00 -
ISO 6134:2017
Rubber hoses and hose assemblies for saturated steam
Specification
1/10/2017 - Paper - French - ISO
Learn More€72.00 -
ISO 6134:2017
Rubber hoses and hose assemblies for saturated steam
Specification
1/10/2017 - Paper - English - ISO
Learn More€72.00 -
ISO 15493:2003/Amd 1:2016
Plastics piping systems for industrial applications
Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)
12/14/2016 - Paper - English - ISO
Learn More€21.00 -
ISO 15493:2003/Amd 1:2016
Plastics piping systems for industrial applications
Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C)
12/14/2016 - Paper - French - ISO
Learn More€21.00 -
ISO 8033:2016 (R2021)
Rubber and plastics hoses
Determination of adhesion between components
12/13/2016 - Paper - French - ISO
Learn More€110.00 -
ISO 8033:2016 (R2021)
Rubber and plastics hoses
Determination of adhesion between components
12/13/2016 - Paper - English - ISO
Learn More€110.00 -
ISO 4641:2016
Rubber hoses and hose assemblies for water suction and discharge
Specification
11/24/2016 - Paper - French - ISO
Learn More€72.00 -
ISO 4641:2016
Rubber hoses and hose assemblies for water suction and discharge
Specification
11/24/2016 - Paper - English - ISO
Learn More€72.00 -
ISO/TS 17902:2016 (R2024)
Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
General information
11/4/2016 - Paper - English - ISO
Learn More€110.00 -
ISO 8331:2016 (R2021)
Rubber and plastics hoses and hose assemblies
Guidelines for selection, storage, use and maintenance
10/28/2016 - Paper - French - ISO
Learn More€110.00 -
ISO 8331:2016 (R2021)
Rubber and plastics hoses and hose assemblies
Guidelines for selection, storage, use and maintenance
10/28/2016 - Paper - English - ISO
Learn More€110.00 -
ISO 2398:2016
Rubber hoses, textile-reinforced, for compressed air
Specification
10/26/2016 - Paper - French - ISO
Learn More€72.00 -
ISO 7751:2016 (R2021)
Rubber and plastics hoses and hose assemblies
Ratios of proof and burst pressure to maximum working pressure
10/26/2016 - Paper - French - ISO
Learn More€48.00 -
ISO 2398:2016
Rubber hoses, textile-reinforced, for compressed air
Specification
10/26/2016 - Paper - English - ISO
Learn More€72.00 -
ISO 7751:2016 (R2021)
Rubber and plastics hoses and hose assemblies
Ratios of proof and burst pressure to maximum working pressure
10/26/2016 - Paper - English - ISO
Learn More€48.00 -
ISO 7326:2016 (R2021)
Rubber and plastics hoses
Assessment of ozone resistance under static conditions
10/7/2016 - Paper - French - ISO
Learn More€72.00 -
ISO 7326:2016 (R2021)
Rubber and plastics hoses
Assessment of ozone resistance under static conditions
10/7/2016 - Paper - English - ISO
Learn More€72.00 -
€72.00
-
€72.00
-
€72.00
-
€72.00
-
ISO 15494:2015 (R2021)
Plastics piping systems for industrial applications
Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP)
9/29/2015 - Paper - French - ISO
Learn More€248.00 -
ISO 15494:2015 (R2021)
Plastics piping systems for industrial applications
Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP)
9/29/2015 - Paper - English - ISO
Learn More€248.00 -
ISO 8308:2015 (R2020)
Rubber and plastics hoses and tubing
Determination of transmission of liquids through hose and tubing walls
9/27/2015 - Paper - French - ISO
Learn More€72.00 -
ISO 8308:2015 (R2020)
Rubber and plastics hoses and tubing
Determination of transmission of liquids through hose and tubing walls
9/27/2015 - Paper - English - ISO
Learn More€72.00 -
ISO 18489:2015 (R2023)
Polyethylene (PE) materials for piping systems
Determination of resistance to slow crack growth under cyclic loading
9/2/2015 - Paper - English - ISO
Learn More€72.00 -
ISO 18488:2015 (R2020)
Polyethylene (PE) materials for piping systems
Determination of Strain Hardening Modulus in relation to slow crack growth
8/20/2015 - Paper - English - ISO
Learn More€72.00 -
ISO 10931:2005/Amd 1:2015
Plastics piping systems for industrial applications
Poly(vinylidene fluoride) (PVDF)
7/9/2015 - Paper - English - ISO
Learn More€21.00 -
ISO 10931:2005/Amd 1:2015
Plastics piping systems for industrial applications
Poly(vinylidene fluoride) (PVDF)
7/9/2015 - Paper - French - ISO
Learn More€21.00 -
€72.00
-
€72.00
-
€72.00
-
ISO 6259-1:2015 (R2020)
Thermoplastics pipes
Determination of tensile properties
3/26/2015 - Paper - English - ISO
Learn More€72.00 -
ISO 3458:2015 (R2020)
Plastics piping systems
Mechanical joints between fittings and pressure pipes
3/26/2015 - Paper - French - ISO
Learn More€48.00 -
ISO 3458:2015 (R2020)
Plastics piping systems
Mechanical joints between fittings and pressure pipes
3/26/2015 - Paper - English - ISO
Learn More€48.00 -
€48.00
-
ISO 17778:2015 (R2022)
Plastics piping systems
Fittings, valves and ancillaries
3/16/2015 - Paper - English - ISO
Learn More€48.00 -
ISO 18851:2015 (R2020)
Plastics piping systems
Glass-reinforced thermosetting plastics (GRP) pipes and fittings
3/16/2015 - Paper - English - ISO
Learn More€72.00 -
ISO 7509:2015 (R2020)
Plastics piping systems
Glass-reinforced thermosetting plastics (GRP) pipes
3/4/2015 - Paper - English - ISO
Learn More€72.00 -
ISO 13951:2015 (R2021)
Plastics piping systems
Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
3/2/2015 - Paper - French - ISO
Learn More€48.00 -
ISO 13951:2015 (R2021)
Plastics piping systems
Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
3/2/2015 - Paper - English - ISO
Learn More€48.00 -
ISO 3503:2015 (R2020)
Plastics piping systems
Mechanical joints between fittings and pressure pipes
2/27/2015 - Paper - French - ISO
Learn More€48.00 -
ISO 3503:2015 (R2020)
Plastics piping systems
Mechanical joints between fittings and pressure pipes
2/27/2015 - Paper - English - ISO
Learn More€48.00 -
ISO 13845:2015 (R2020)
Plastics piping systems
Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes
2/10/2015 - Paper - French - ISO
Learn More€48.00 -
ISO 3994:2014 (R2019)
Plastics hoses
Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials
8/11/2014 - Paper - French - ISO
Learn More€110.00 -
ISO 8029:2014 (R2019)
Plastics hose
General-purpose collapsible water hose, textile-reinforced
8/11/2014 - Paper - French - ISO
Learn More€110.00 -
ISO 3994:2014 (R2019)
Plastics hoses
Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials
8/11/2014 - Paper - English - ISO
Learn More€110.00 -
ISO 8029:2014 (R2019)
Plastics hose
General-purpose collapsible water hose, textile-reinforced
8/11/2014 - Paper - English - ISO
Learn More€110.00 -
ISO 8030:2014 (R2019)
Rubber and plastics hoses
Method of test for flammability
7/14/2014 - Paper - French - ISO
Learn More€72.00 -
ISO 8030:2014 (R2019)
Rubber and plastics hoses
Method of test for flammability
7/14/2014 - Paper - English - ISO
Learn More€72.00 -
ISO 17484-1:2014 (R2019)
Plastics piping systems
Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa)
5/23/2014 - Paper - English - ISO
Learn More€174.00 -
ISO/TS 11619:2014
Polyurethane tubing for use primarily in pneumatic installations
Dimensions and specification
2/11/2014 - Paper - English - ISO
Learn More€72.00 -
ISO 15874-1:2013 (R2023)
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
2/14/2013 - Paper - French - ISO
Learn More€72.00 -
ISO 15874-5:2013 (R2023)
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
2/14/2013 - Paper - French - ISO
Learn More€72.00 -
ISO 15874-3:2013 (R2023)
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
2/14/2013 - Paper - French - ISO
Learn More€110.00 -
ISO 15874-2:2013 (R2023)
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
2/13/2013 - Paper - French - ISO
Learn More€110.00 -
ISO 9080:2012 (R2023)
Plastics piping and ducting systems
Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
10/11/2012 - Paper - French - ISO
Learn More€174.00 -
ISO 9080:2012 (R2023)
Plastics piping and ducting systems
Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
10/11/2012 - Paper - English - ISO
Learn More€174.00 -
ISO/TS 16479:2012 (R2024)
Thermoplastics pipes for the conveyance of fluids
Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
10/1/2012 - Paper - English - ISO
Learn More€148.00 -
€199.00
-
€199.00
-
ISO 13470:2012 (R2023)
Trenchless applications of ductile iron pipes systems
Product design and installation
6/29/2012 - Paper - English - ISO
Learn More€148.00 -
ISO 12230:2012 (R2022)
Polybutene-1 (PB-1) pipes
Effect of time and temperature on the expected strength
6/1/2012 - Paper - English - ISO
Learn More€72.00 -
ISO 15306:2003/Amd 1:2012
Glass-reinforced thermosetting plastics (GRP) pipes
Determination of the resistance to cyclic internal pressure
1/24/2012 - Paper - English - ISO
Learn More€21.00 -
ISO 19893:2011 (R2022)
Plastics piping systems
Thermoplastics pipes and fittings for hot and cold water
12/14/2011 - Paper - French - ISO
Learn More€72.00 -
ISO 19893:2011 (R2022)
Plastics piping systems
Thermoplastics pipes and fittings for hot and cold water
12/14/2011 - Paper - English - ISO
Learn More€72.00 -
ISO 10803:2011
Design method for ductile iron pipes
General information
12/2/2011 - Paper - English - ISO
Learn More€223.00 -
ISO 10619-3:2011 (R2021)
Rubber and plastics hoses and tubing
Measurement of flexibility and stiffness
11/24/2011 - Paper - French - ISO
Learn More€48.00 -
ISO 10619-3:2011 (R2021)
Rubber and plastics hoses and tubing
Measurement of flexibility and stiffness
11/24/2011 - Paper - English - ISO
Learn More€48.00 -
ISO 19892:2011 (R2022)
Plastics piping systems
Thermoplastics pipes and fittings for hot and cold water
10/21/2011 - Paper - French - ISO
Learn More€48.00 -
ISO 19892:2011 (R2022)
Plastics piping systems
Thermoplastics pipes and fittings for hot and cold water
10/21/2011 - Paper - English - ISO
Learn More€48.00 -
ISO 13272:2011 (R2017)
Plastics piping systems for non-pressure underground drainage and sewerage
Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE)
10/6/2011 - Paper - French - ISO
Learn More€148.00 -
ISO 30013:2011 (R2021)
Rubber and plastics hoses
Methods of exposure to laboratory light sources
10/6/2011 - Paper - French - ISO
Learn More€148.00 -
ISO 30013:2011 (R2021)
Rubber and plastics hoses
Methods of exposure to laboratory light sources
10/6/2011 - Paper - English - ISO
Learn More€148.00 -
ISO 23228:2011 (R2022)
Thermoplastics pipes for the conveyance of fluids
Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
9/29/2011 - Paper - English - ISO
Learn More€72.00 -
ISO 6224:2011
Thermoplastics hoses, textile-reinforced, for general-purpose water applications
Specification
9/27/2011 - Paper - French - ISO
Learn More€72.00 -
ISO 6224:2011
Thermoplastics hoses, textile-reinforced, for general-purpose water applications
Specification
9/27/2011 - Paper - English - ISO
Learn More€72.00 -
ISO 10147:2011 (R2022)
Pipes and fittings made of crosslinked polyethylene (PE-X)
Estimation of the degree of crosslinking by determination of the gel content
8/30/2011 - Paper - French - ISO
Learn More€48.00 -
ISO 10147:2011 (R2022)
Pipes and fittings made of crosslinked polyethylene (PE-X)
Estimation of the degree of crosslinking by determination of the gel content
8/30/2011 - Paper - English - ISO
Learn More€48.00 -
ISO 7005-1:2011 (R2023)
Pipe flanges
Part 1: Steel flanges for industrial and general service piping systems
7/15/2011 - Paper - English - ISO
Learn More€72.00 -
ISO 10893-1:2011
Non-destructive testing of steel tubes
Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
3/24/2011 - Paper - French - ISO
Learn More€110.00 -
ISO 10893-11:2011
Non-destructive testing of steel tubes
Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
3/24/2011 - Paper - French - ISO
Learn More€72.00 -
ISO 10893-11:2011
Non-destructive testing of steel tubes
Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
3/24/2011 - Paper - English - ISO
Learn More€72.00 -
ISO 10893-1:2011
Non-destructive testing of steel tubes
Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
3/24/2011 - Paper - English - ISO
Learn More€110.00 -
ISO 21751:2011 (R2023)
Plastics pipes and fittings
Decohesion test of electrofusion assemblies
3/22/2011 - Paper - English - ISO
Learn More€72.00 -
ISO 14531-3:2010 (R2021)
Plastics pipes and fittings
Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels
11/22/2010 - Paper - English - ISO
Learn More€148.00 -
ISO 13956:2010
Plastics pipes and fittings
Decohesion test of polyethylene (PE) saddle fusion joints
9/22/2010 - Paper - English - ISO
Learn More€72.00 -
ISO 19899:2010 (R2021)
Plastics piping systems
Polyolefin pipes and mechanical fitting assemblies
8/30/2010 - Paper - English - ISO
Learn More€72.00 -
ISO/TS 26873:2010 (R2020)
Plastics pipes and fittings
Definition and construction procedures for reference lines
8/11/2010 - Paper - English - ISO
Learn More€48.00 -
ISO/TS 19911:2010 (R2024)
Plastics pipes and fittings
Format of a technical file for characterizing PE spigot end fittings
6/14/2010 - Paper - English - ISO
Learn More€48.00 -
ISO 12151-1:2010 (R2023)
Connections for hydraulic fluid power and general use
Hose fittings
6/7/2010 - Paper - French - ISO
Learn More€110.00 -
ISO 12151-1:2010 (R2023)
Connections for hydraulic fluid power and general use
Hose fittings
6/7/2010 - Paper - English - ISO
Learn More€110.00 -
ISO 13260:2010 (R2021)
Thermoplastics piping systems for non-pressure underground drainage and sewerage
Test method for resistance to combined temperature cycling and external loading
6/4/2010 - Paper - French - ISO
Learn More€72.00 -
ISO 13264:2010 (R2021)
Thermoplastics piping systems for non-pressure underground drainage and sewerage
Thermoplastics fittings
5/25/2010 - Paper - French - ISO
Learn More€48.00 -
ISO 13265:2010 (R2015)
Thermoplastics piping systems for non-pressure underground drainage and sewerage
Joints for buried non-pressure applications
4/29/2010 - Paper - French - ISO
Learn More€110.00 -
ISO 13262:2010 (R2021)
Thermoplastics piping systems for non-pressure underground drainage and sewerage
Thermoplastics spirally-formed structured-wall pipes
4/26/2010 - Paper - French - ISO
Learn More€48.00 -
ISO 13254:2010 (R2021)
Thermoplastics piping systems for non-pressure applications
Test method for watertightness
4/19/2010 - Paper - French - ISO
Learn More€48.00 -
ISO 13255:2010 (R2021)
Thermoplastics piping systems for soil and waste discharge inside buildings
Test method for airtightness of joints
4/19/2010 - Paper - French - ISO
Learn More€48.00 -
ISO 13254:2010 (R2021)
Thermoplastics piping systems for non-pressure applications
Test method for watertightness
4/19/2010 - Paper - English - ISO
Learn More€48.00 -
ISO 13255:2010 (R2021)
Thermoplastics piping systems for soil and waste discharge inside buildings
Test method for airtightness of joints
4/19/2010 - Paper - English - ISO
Learn More€48.00 -
ISO 13263:2010 (R2021)
Thermoplastics piping systems for non-pressure underground drainage and sewerage
Thermoplastics fittings
4/15/2010 - Paper - French - ISO
Learn More€48.00 -
ISO 13229:2010 (R2021)
Thermoplastics piping systems for non-pressure applications
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
3/8/2010 - Paper - French - ISO
Learn More€48.00 -
ISO 13229:2010 (R2021)
Thermoplastics piping systems for non-pressure applications
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
3/8/2010 - Paper - English - ISO
Learn More€48.00 -
€110.00
-
€110.00
-
ISO 4080:2009
Rubber and plastics hoses and hose assemblies
Determination of permeability to gas
12/7/2009 - Paper - French - ISO
Learn More€72.00 -
ISO 4080:2009
Rubber and plastics hoses and hose assemblies
Determination of permeability to gas
12/7/2009 - Paper - English - ISO
Learn More€72.00 -
ISO 1452-1:2009 (R2019)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure
Unplasticized poly(vinyl chloride) (PVC-U)
12/1/2009 - Paper - French - ISO
Learn More€72.00 -
ISO 1452-2:2009 (R2019)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure
Unplasticized poly(vinyl chloride) (PVC-U)
12/1/2009 - Paper - French - ISO
Learn More€148.00 -
ISO 1452-3:2009 (R2019)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure
Unplasticized poly(vinyl chloride) (PVC-U)
12/1/2009 - Paper - French - ISO
Learn More€199.00 -
ISO 1452-4:2009 (R2019)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure
Unplasticized poly(vinyl chloride) (PVC-U)
12/1/2009 - Paper - French - ISO
Learn More€72.00 -
ISO 1452-5:2009 (R2019)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure
Unplasticized poly(vinyl chloride) (PVC-U)
12/1/2009 - Paper - French - ISO
Learn More€110.00 -
ISO 22391-1:2009 (R2019)
Plastics piping systems for hot and cold water installations
Polyethylene of raised temperature resistance (PE-RT)
11/24/2009 - Paper - French - ISO
Learn More€72.00 -
ISO 22391-5:2009 (R2019)
Plastics piping systems for hot and cold water installations
Polyethylene of raised temperature resistance (PE-RT)
11/24/2009 - Paper - French - ISO
Learn More€72.00 -
ISO 22391-2:2009 (R2019)
Plastics piping systems for hot and cold water installations
Polyethylene of raised temperature resistance (PE-RT)
11/24/2009 - Paper - French - ISO
Learn More€110.00 -
ISO 22391-3:2009 (R2019)
Plastics piping systems for hot and cold water installations
Polyethylene of raised temperature resistance (PE-RT)
11/24/2009 - Paper - French - ISO
Learn More€110.00 -
ISO 12162:2009 (R2021)
Thermoplastics materials for pipes and fittings for pressure applications
Classification, designation and design coefficient
10/27/2009 - Paper - French - ISO
Learn More€72.00 -
ISO 12162:2009 (R2021)
Thermoplastics materials for pipes and fittings for pressure applications
Classification, designation and design coefficient
10/27/2009 - Paper - English - ISO
Learn More€72.00 -
€72.00
-
ISO 4023:2009 (R2019)
Rubber hoses and hose assemblies for steam
Test methods
10/22/2009 - Paper - English - ISO
Learn More€72.00 -
ISO 3213:2009 (R2020)
Polypropylene (PP) pipes
Effect of time and temperature on the expected strength
9/16/2009 - Paper - French - ISO
Learn More€110.00 -
ISO 3213:2009 (R2020)
Polypropylene (PP) pipes
Effect of time and temperature on the expected strength
9/16/2009 - Paper - English - ISO
Learn More€110.00 -
ISO 12151-6:2009 (R2021)
Connections for hydraulic fluid power and general use
Hose fittings
7/9/2009 - Paper - French - ISO
Learn More€72.00 -
ISO 12151-6:2009 (R2021)
Connections for hydraulic fluid power and general use
Hose fittings
7/9/2009 - Paper - English - ISO
Learn More€72.00 -
ISO 11414:2009 (R2021)
Plastics pipes and fittings
Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
1/29/2009 - Paper - French - ISO
Learn More€72.00 -
ISO 11414:2009 (R2021)
Plastics pipes and fittings
Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
1/29/2009 - Paper - English - ISO
Learn More€72.00 -
ISO 24033:2009
Polyethylene of raised temperature resistance (PE-RT) pipes
Effect of time and temperature on the expected strength
1/7/2009 - Paper - English - ISO
Learn More€72.00 -
ISO 17484-2:2009 (R2019)
Plastics piping systems
Multilayer pipe systems for indoor gas installations
1/5/2009 - Paper - English - ISO
Learn More€72.00 -
ISO 28702:2008 (R2021)
Rubber and plastics hoses and tubing
Textile-reinforced types
10/22/2008 - Paper - French - ISO
Learn More€48.00 -
ISO 28702:2008 (R2021)
Rubber and plastics hoses and tubing
Textile-reinforced types
10/22/2008 - Paper - English - ISO
Learn More€48.00 -
€48.00
-
ISO 13968:2008 (R2023)
Plastics piping and ducting systems
Thermoplastics pipes
10/2/2008 - Paper - English - ISO
Learn More€48.00 -
ISO 21003-5:2008 (R2023)
Multilayer piping systems for hot and cold water installations inside buildings
Part 5: Fitness for purpose of the system
6/30/2008 - Paper - French - ISO
Learn More€72.00 -
ISO 21003-3:2008 (R2023)
Multilayer piping systems for hot and cold water installations inside buildings
Part 3: Fittings
6/30/2008 - Paper - French - ISO
Learn More€72.00 -
ISO 12176-2:2008
Plastics pipes and fittings
Equipment for fusion jointing polyethylene systems
6/3/2008 - Paper - French - ISO
Learn More€148.00 -
ISO 12176-2:2008
Plastics pipes and fittings
Equipment for fusion jointing polyethylene systems
6/3/2008 - Paper - English - ISO
Learn More€148.00 -
ISO 13477:2008 (R2023)
Thermoplastics pipes for the conveyance of fluids
Determination of resistance to rapid crack propagation (RCP)
3/20/2008 - Paper - French - ISO
Learn More€110.00 -
ISO 13477:2008 (R2023)
Thermoplastics pipes for the conveyance of fluids
Determination of resistance to rapid crack propagation (RCP)
3/20/2008 - Paper - English - ISO
Learn More€110.00 -
ISO 18373-2:2008 (R2021)
Rigid PVC pipes
Differential scanning calorimetry (DSC) method
2/5/2008 - Paper - English - ISO
Learn More€72.00 -
ISO 13950:2007/Cor 1:2008
Plastics pipes and fittings
Automatic recognition systems for electrofusion joints
1/8/2008 - Paper - English - ISO
Learn More€0.00 -
ISO 13950:2007/Cor 1:2008
Plastics pipes and fittings
Automatic recognition systems for electrofusion joints
1/8/2008 - Paper - French - ISO
Learn More€0.00 -
ISO 1167-3:2007 (R2021)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids
Determination of the resistance to internal pressure
10/30/2007 - Paper - French - ISO
Learn More€72.00 -
ISO 1167-4:2007 (R2021)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids
Determination of the resistance to internal pressure
10/30/2007 - Paper - French - ISO
Learn More€48.00