23.040.70 : Hoses and hose assemblies
-
€293.00
-
23/30468757 DC:2023
BS EN ISO 6134. Rubber hoses and hose assemblies for saturated steam. Specification
10/12/2023 - PDF - English - BSI
Learn More€24.00 -
23/30468765 DC:2023
BS EN ISO 8028. Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification
8/4/2023 - PDF - English - BSI
Learn More€24.00 -
23/30429559 DC:2023
BS EN ISO 4080. Rubber and plastics hoses and tubing, and their assemblies. Determination of permeability to gas
8/3/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 5774:2023 + Redline
Tracked Changes. Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
6/8/2023 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 5774:2023
Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
6/5/2023 - PDF - English - BSI
Learn More€180.00 -
23/30446502 DC:2023
BS EN ISO 4641. Rubber hoses and hose assemblies for water suction and discharge. Specification
6/1/2023 - PDF - English - BSI
Learn More€24.00 -
23/30446514 DC:2023
BS EN ISO 6224. Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
5/16/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 13483:2022 + Redline
Tracked Changes. Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
4/28/2023 - PDF - English - BSI
Learn More€382.00 -
BS EN 13483:2022
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
4/13/2023 - PDF - English - BSI
Learn More€293.00 -
23/30446498 DC:2023
BS EN ISO 2398. Rubber hoses, textile-reinforced, for compressed air. Specification
2/21/2023 - PDF - English - BSI
Learn More€24.00 -
BS ISO 12151-2:2022 + Redline
Tracked Changes. Connections for hydraulic fluid power and general use. Hose fittings with ISO 8434-1 24° cone connector ends O-rings
11/1/2022 - PDF - English - BSI
Learn More€235.00 -
BS ISO 12151-2:2022
Connections for hydraulic fluid power and general use — Hose fittings Part 2: with ISO 8434-1 24° cone connector ends O-rings
10/27/2022 - PDF - English - BSI
Learn More€180.00 -
BS EN 14420-2:2022 + Redline
Tracked Changes. Hose fittings with clamp units side parts of hose tail
9/28/2022 - PDF - English - BSI
Learn More€197.00 -
BS EN 14420-4:2022 + Redline
Tracked Changes. Hose fittings with clamp units Flange connections
9/23/2022 - PDF - English - BSI
Learn More€235.00 -
€151.00
-
€180.00
-
BS EN ISO 4671:2022 + Redline
Tracked Changes. Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
6/6/2022 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 8330:2022 + Redline
Tracked Changes. Rubber and plastics hoses and hose assemblies. Vocabulary
5/11/2022 - PDF - English - BSI
Learn More€382.00 -
€293.00
-
BS EN ISO 18752:2022 + Redline
Tracked Changes. Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification
5/5/2022 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 4671:2022
Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
5/3/2022 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 18752:2022
Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification
4/27/2022 - PDF - English - BSI
Learn More€250.00 -
22/30450615 DC:2022
BS EN 14585-1. Corrugated metal hose assemblies for pressure applications
4/21/2022 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 10619-2:2021 + Redline
Tracked Changes. Rubber and plastics hoses tubing. Measurement of flexibility stiffness Bending tests at sub-ambient temperatures
2/7/2022 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 6801:2021 + Redline
Tracked Changes. Rubber and plastics hoses. Determination of volumetric expansion
1/13/2022 - PDF - English - BSI
Learn More€197.00 -
BS ISO 12151-3:2021 + Redline
Tracked Changes. Connections for hydraulic fluid power and general use. Hose fittings with ISO 6162-1 or 6162-2 flange ends
12/21/2021 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 6801:2021
Rubber and plastics hoses. Determination of volumetric expansion
12/20/2021 - PDF - English - BSI
Learn More€151.00 -
BS ISO 12151-3:2021
Connections for hydraulic fluid power and general use. Hose fittings with ISO 6162-1 or 6162-2 flange ends
11/29/2021 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 10619-2:2021
Rubber and plastics hoses tubing. Measurement of flexibility stiffness Bending tests at sub-ambient temperatures
8/27/2021 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 7233:2021
Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum
5/28/2021 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 1402:2021
Rubber and plastics hoses and hose assemblies. Hydrostatic testing
5/28/2021 - PDF - English - BSI
Learn More€180.00 -
BS ISO 23384:2021
Rubber and plastics hoses and hose assemblies, wire or textile reinforced types with working pressure equal or above 70 MPa (700 bar). Specification
4/28/2021 - PDF - English - BSI
Learn More€180.00 -
BS EN 12115:2021
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
2/28/2021 - PDF - English - BSI
Learn More€331.00 -
BS EN ISO 8031:2020
Rubber and plastics hoses and hose assemblies. Determination of electrical resistance and conductivity
7/27/2020 - PDF - English - BSI
Learn More€250.00 -
BS EN 16436-1:2014+A3:2020
Rubber and plastics hoses, tubing assemblies for use with propane butane their mixtures in the vapour phase Hoses tubings
7/23/2020 - PDF - English - BSI
Learn More€250.00 -
20/30359760 DC:2020
BS ISO 20444. Rubber and plastics hoses. Determination of abrasion resistance of the outer cover. Abrasion tests where the hose is rotated against a reciprocating abrasion tool
6/11/2020 - PDF - English - BSI
Learn More€24.00 -
BS EN 13766:2018+A1:2020
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
5/19/2020 - PDF - English - BSI
Learn More€250.00 -
€180.00
-
€235.00
-
BS EN ISO 10619-1:2018 + Redline
Tracked Changes. Rubber and plastics hoses tubing. Measurement of flexibility stiffness Bending tests at ambient temperature
2/26/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 6802:2018 + Redline
Tracked Changes. Rubber or plastics hoses and hose assemblies. Hydraulic impulse test with flexing
2/26/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 8308:2015 + Redline
Tracked Changes. Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls
2/26/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 854:2015 + Redline
Tracked Changes. Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification
2/26/2020 - PDF - English - BSI
Learn More€235.00 -
PD ISO/TS 17165-2:2018 + Redline
Tracked Changes. Hydraulic fluid power. Hose assemblies Practices for hydraulic hose
2/26/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 857:2015 + Redline
Tracked Changes. Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
2/26/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 1113:2015 + Redline
Tracked Changes. Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification
2/26/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 8033:2017 + Redline
Tracked Changes. Rubber and plastics hoses. Determination of adhesion between components
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 7751:2016 + Redline
Tracked Changes. Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure
2/25/2020 - PDF - English - BSI
Learn More€197.00 -
BS EN ISO 7326:2016 + Redline
Tracked Changes. Rubber and plastics hoses. Assessment of ozone resistance under static conditions
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 8331:2016 + Redline
Tracked Changes. Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance
2/25/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 13765:2018 + Redline
Tracked Changes. Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
2/25/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 2398:2016 + Redline
Tracked Changes. Rubber hoses, textile-reinforced, for compressed air. Specification
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 853:2015 + Redline
Tracked Changes. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 13618:2016 + Redline
Tracked Changes. Flexible hose assemblies in drinking water installations. Functional requirements and test methods
2/25/2020 - PDF - English - BSI
Learn More€382.00 -
BS EN ISO 6803:2017 + Redline
Tracked Changes. Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 560:2018 + Redline
Tracked Changes. Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 1765:2016 + Redline
Tracked Changes. Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
2/25/2020 - PDF - English - BSI
Learn More€382.00 -
BS EN 1762:2018 + Redline
Tracked Changes. Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
2/24/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 16436-2:2018
Rubber and plastics hoses, tubing assemblies for use with propane butane their mixture in the vapour phase Assemblies
10/30/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 1403:2019
Rubber hoses, textile-reinforced, for general-purpose water applications. Specification
9/16/2019 - PDF - English - BSI
Learn More€151.00 -
BS EN 14423:2013+A2:2019
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
5/22/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN 856:2015
Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification
3/15/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 1762:2018
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
1/14/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 6802:2018
Rubber or plastics hoses and hose assemblies. Hydraulic impulse test with flexing
10/31/2018 - PDF - English - BSI
Learn More€180.00 -
BS EN 560:2018
Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes
9/19/2018 - PDF - English - BSI
Learn More€180.00 -
BS EN 13765:2018
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
7/5/2018 - PDF - English - BSI
Learn More€250.00 -
PD ISO/TS 17165-2:2018
Hydraulic fluid power. Hose assemblies Practices for hydraulic hose
4/10/2018 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 10619-1:2018
Rubber and plastics hoses tubing. Measurement of flexibility stiffness Bending tests at ambient temperature
3/9/2018 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 28017:2018
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification
3/9/2018 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 10960:2018
Rubber and plastics hoses. Assessment of ozone resistance under dynamic conditions
2/23/2018 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 5359:2014+A1:2017
Anaesthetic and respiratory equipment. Low-pressure hose assemblies for use with medical gases
1/31/2018 - PDF - English - BSI
Learn More€293.00 -
PD CEN/TR 14585-3:2017
Corrugated metal hose assemblies for pressure applications Design method
12/14/2017 - PDF - English - BSI
Learn More€331.00 -
BS EN ISO 6134:2017
Rubber hoses and hose assemblies for saturated steam. Specification
9/30/2017 - PDF - English - BSI
Learn More€180.00 -
BS EN 16820:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining
8/25/2017 - PDF - English - BSI
Learn More€250.00 -
BS EN 16821:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Silicone rubber hoses
8/25/2017 - PDF - English - BSI
Learn More€180.00 -
BS ISO 12151-1:2010+A1:2017
Connections for hydraulic fluid power and general use. Hose fittings with ISO 8434-3 O-ring face seal ends
4/30/2017 - PDF - English - BSI
Learn More€250.00 -
PD ISO/TS 16975-2:2016
Respiratory protective devices. Selection, use and maintenance Condensed guidance to establishing implementing a respiratory device programme
3/31/2017 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 6803:2017
Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
3/31/2017 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 8033:2017
Rubber and plastics hoses. Determination of adhesion between components
1/31/2017 - PDF - English - BSI
Learn More€180.00 -
€180.00
-
BS EN ISO 2398:2016
Rubber hoses, textile-reinforced, for compressed air. Specification
12/31/2016 - PDF - English - BSI
Learn More€180.00 -
BS ISO 13775-2:2016
Thermoplastic tubing and hoses for automotive use Petroleum-based-fuel applications
12/31/2016 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 7751:2016
Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure
12/31/2016 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 8331:2016
Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance
12/31/2016 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 4641:2016
Rubber hoses and hose assemblies for water suction and discharge. Specification
12/31/2016 - PDF - English - BSI
Learn More€180.00 -
BS EN 13618:2016
Flexible hose assemblies in drinking water installations. Functional requirements and test methods
12/31/2016 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 7326:2016
Rubber and plastics hoses. Assessment of ozone resistance under static conditions
10/31/2016 - PDF - English - BSI
Learn More€180.00 -
BS EN 16643:2016
Rubber and plastics hoses and hose assemblies. Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals. Specification
8/31/2016 - PDF - English - BSI
Learn More€331.00 -
BS EN 1765:2016
Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
8/31/2016 - PDF - English - BSI
Learn More€293.00 -
16/30302789 DC:2016
BS ISO 19718. Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic power units used in heavy duty hydraulic tool applications. Specification
4/4/2016 - PDF - English - BSI
Learn More€24.00 -
BS EN 14420-8:2013+A1:2016
Hose fittings with clamp units Symmetrical half coupling (Guillemin system)
2/29/2016 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 8308:2015
Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls
10/31/2015 - PDF - English - BSI
Learn More€180.00 -
BS EN 853:2015
Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
4/30/2015 - PDF - English - BSI
Learn More€180.00 -
BS EN 854:2015
Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification
4/30/2015 - PDF - English - BSI
Learn More€180.00 -
BS EN 857:2015
Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
4/30/2015 - PDF - English - BSI
Learn More€180.00 -
BS EN 16617:2015
Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking
4/30/2015 - PDF - English - BSI
Learn More€250.00 -
BS EN 1113:2015
Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification
4/30/2015 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 3994:2014
Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
8/31/2014 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 8029:2014
Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification
8/31/2014 - PDF - English - BSI
Learn More€250.00 -
€180.00
-
BS EN 1947:2014
Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
7/31/2014 - PDF - English - BSI
Learn More€180.00 -
BS EN 14540:2014
Fire-fighting hoses. Non-percolating layflat hoses for fixed systems
7/31/2014 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 8030:2014
Rubber and plastics hoses. Method of test for flammability
7/31/2014 - PDF - English - BSI
Learn More€180.00 -
PD CEN/TS 16650:2014
Specification for hose couplings for petrol, oil and lubricants. High pressure couplings
6/30/2014 - PDF - English - BSI
Learn More€151.00 -
BS EN 13482:2013
Rubber hoses and hose assemblies for asphalt and bitumen. Specification
10/31/2013 - PDF - English - BSI
Learn More€180.00 -
BS EN 14422:2013
Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
7/31/2013 - PDF - English - BSI
Learn More€250.00 -
BS EN 14420-3:2013
Hose fittings with clamp units Clamp units, bolted or pinned
7/31/2013 - PDF - English - BSI
Learn More€180.00 -
€250.00
-
BS EN 14420-1:2013
Hose fittings with clamp units Requirements, types of fixing and connection, designation testing
7/31/2013 - PDF - English - BSI
Learn More€180.00 -
€348.00
-
€180.00
-
BS EN 1360:2013
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
6/30/2013 - PDF - English - BSI
Learn More€250.00 -
€331.00
-
12/30238564 DC:2012
BS ISO 16301. Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and for hydraulic power units used in hydraulic tools. Specification
8/13/2012 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 30013:2011
Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties
12/31/2011 - PDF - English - BSI
Learn More€250.00 -
BS ISO 10619-3:2011
Rubber and plastics hoses tubing. Measurement of flexibility stiffness Bending tests at high low temperatures
12/31/2011 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 6224:2011
Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
11/30/2011 - PDF - English - BSI
Learn More€180.00 -
€348.00
-
€180.00
-
BS EN ISO 4080:2009
Rubber and plastics hoses and hose assemblies. Determination of permeability to gas
2/28/2010 - PDF - English - BSI
Learn More€180.00 -
BS ISO 12151-6:2009
Connections for hydraulic fluid power and general use. Hose fittings with ISO 8434-6 60° cone ends
12/31/2009 - PDF - English - BSI
Learn More€250.00 -
BS ISO 28702:2008
Rubber and plastics hoses and tubing. Textile reinforced types. Sub-ambient temperature crush test
11/30/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN 1112:2008
Sanitary tapware. Shower outlets for sanitary tapware for water supply systems type 1 and type 2. General technical specification
8/29/2008 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 1307:2008
Rubber and plastics hoses. Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
2/29/2008 - PDF - English - BSI
Learn More€151.00 -
€180.00
-
BS ISO 17165-1:2007
Hydraulic fluid power. Hose assemblies Dimensions and requirements
11/30/2007 - PDF - English - BSI
Learn More€293.00 -
BS ISO 12151-4:2007
Connections for hydraulic fluid power and general use. Hose fittings with ISO 6149 metric stud ends
8/31/2007 - PDF - English - BSI
Learn More€180.00 -
BS ISO 12151-5:2007
Connections for hydraulic fluid power and general use. Hose fittings with ISO 8434-2 37° flared ends
8/31/2007 - PDF - English - BSI
Learn More€180.00 -
BS EN 14800:2007
Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
4/30/2007 - PDF - English - BSI
Learn More€348.00 -
BS EN 14585-1:2006
Corrugated metal hose assemblies for pressure applications Requirements
5/31/2006 - PDF - English - BSI
Learn More€250.00 -
PD CEN/TR 14585-2:2006
Corrugated metal hose assemblies for pressure applications Guidance on the use of conformity assessment procedures
4/28/2006 - PDF - English - BSI
Learn More€180.00 -
€250.00
-
BS 6501-1:2004
Metal hose assemblies Guidance on the construction and use of corrugated
2/19/2004 - PDF - English - BSI
Learn More€250.00 -
€293.00
-
PD ISO/TR 17784:2003
Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel
12/5/2003 - PDF - English - BSI
Learn More€348.00 -
BS EN 561:2002
Gas welding equipment. Quick-action coupling with shut-off valves for welding, cutting and allied processes
7/10/2002 - PDF - English - BSI
Learn More€180.00 -
€151.00
-
BS 4089:1999
Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases
12/15/1999 - PDF - English - BSI
Learn More€151.00 -
BS ISO 13774:1998
Rubber and plastics hoses for fuels for internal combustion engines. Method of test for flammability
10/15/1999 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 8032:1999
Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)
9/15/1999 - PDF - English - BSI
Learn More€151.00 -
BS EN 1761:1999
Rubber hoses and hose assemblies for fuel truck delivery. Specification
6/15/1999 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 10807:1997
Pipework. Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere
3/15/1997 - PDF - English - BSI
Learn More€180.00 -
BS EN 1327:1996
Gas welding equipment. Thermoplastic hoses for welding and allied processes
12/15/1996 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 7662:1996
Rubber and plastics hoses. Determination of abrasion of lining
12/15/1996 - PDF - English - BSI
Learn More€151.00 -
BS 5173-103.13:1994
Methods of test for rubber and plastics hoses hose assemblies. Physical tests Determination resistance to fire
1/15/1994 - PDF - English - BSI
Learn More€151.00 -
BS 5173-100:1992
Method of test for rubber and plastics hoses hose assemblies. General introduction
2/28/1992 - PDF - English - BSI
Learn More€151.00 -
BS 5173-103.7:1991
Methods of test for rubber and plastics hoses hose assemblies. Physical tests Determination fracture resistance rigid polymer helical reinforcement in thermoplastics
1/31/1991 - PDF - English - BSI
Learn More€151.00 -
BS 5173-102.4:1990
Methods of test for rubber and plastics hoses hose assemblies. Hydraulic pressure tests Determination volumetric expansion hydraulic
11/30/1990 - PDF - English - BSI
Learn More€151.00 -
BS 5173-103.2:1990
Methods of test for rubber and plastics hoses hose assemblies. Physical tests Determination crush resistance
10/31/1990 - PDF - English - BSI
Learn More€151.00 -
BS 5173-103.6:1990
Methods of test for rubber and plastics hoses hose assemblies. Physical tests Determination ignitability lining
8/31/1990 - PDF - English - BSI
Learn More€151.00 -
BS 5173-106.2:1990
Methods of test for rubber and plastics hoses hose assemblies. Environmental tests General requirements high temperature ageing
8/31/1990 - PDF - English - BSI
Learn More€151.00 -
BS 1103:1989
Specification for fabrics for the reinforcement of rubber hoses
10/31/1989 - PDF - English - BSI
Learn More€151.00 -
BS 5173-102.8:1987
Methods of test for rubber and plastics hoses hose assemblies. Hydraulic pressure tests Pressure impulse rigid helix reinforced thermoplastics
4/30/1987 - PDF - English - BSI
Learn More€151.00 -
BS 5122:1986
Specification for rubber hoses for low-pressure and medium-pressure saturated steam
12/31/1986 - PDF - English - BSI
Learn More€151.00 -
BS 5244:1986 (R2017)
Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies
11/28/1986 - PDF - English - BSI
Learn More€151.00