23.040.45 : Plastics fittings

Items 1 to 200 of 931 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • BS ISO 10928:2024

    Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
    3/22/2024 - PDF - English - BSI
    Learn More
    €250.00

  • UNE-EN 1401-1:2020+A1:2024

    Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    3/20/2024 - PDF - Spanish - AENOR
    Learn More
    €88.00

  • BS EN 12201-3:2024

    Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
    3/14/2024 - PDF - English - BSI
    Learn More
    €331.00

  • BS EN ISO 7510:2024

    Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
    2/22/2024 - PDF - English - BSI
    Learn More
    €151.00

  • NBN EN ISO 7510:2024

    Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants (ISO 7510:2017)
    2/7/2024 - PDF - French - NBN
    Learn More
    €89.00

  • NBN EN ISO 7510:2024

    Kunststoff-Rohrleitungssysteme - Teile aus glasfaserverstärkten Kunststoffen (GFK) - Ermittlung der Gehalte von Bestandteilen (ISO 7510:2017)
    2/7/2024 - PDF - German - NBN
    Learn More
    €89.00

  • NBN EN ISO 7510:2024

    Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)
    2/7/2024 - PDF - English - NBN
    Learn More
    €89.00

  • NF EN ISO 7510, T57-210 (02/2024)

    Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants
    2/1/2024 - Paper - French - AFNOR
    Learn More
    €48.00

  • ASTM F1733-24

    Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
    2/1/2024 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM F1733-24 + Redline

    Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
    2/1/2024 - PDF - English - ASTM
    Learn More
    €71.00

  • ASTM D3261-24

    Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
    2/1/2024 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM D3261-24 + Redline

    Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
    2/1/2024 - PDF - English - ASTM
    Learn More
    €71.00

  • NBN EN 12201-3:2024

    Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 3 : Raccords
    1/31/2024 - PDF - French - NBN
    Learn More
    €163.00

  • NBN EN 12201-3:2024

    Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
    1/31/2024 - PDF - English - NBN
    Learn More
    €163.00

  • UNE-EN 17176-2:2019+A1:2023

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
    12/20/2023 - PDF - Spanish - AENOR
    Learn More
    €76.00

  • UNE-EN 17176-2:2019+A1:2023

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
    12/20/2023 - PDF - English - AENOR
    Learn More
    €91.20

  • UNE-EN ISO 11296-9:2023

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
    12/20/2023 - PDF - Spanish - AENOR
    Learn More
    €85.00

  • UNE-EN ISO 11296-9:2023

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
    12/20/2023 - PDF - English - AENOR
    Learn More
    €102.00

  • DIN CEN/TS 1046:2023-12

    Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation, German version CEN/TS 1046:2021
    12/1/2023 - PDF - German - DIN
    Learn More
    €84.02

  • ASTM D2152-23

    Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
    11/1/2023 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D2152-23 + Redline

    Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
    11/1/2023 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM F2986-23

    Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate, Heap Leach Aeration and Other Mining Applications
    11/1/2023 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM F2986-23 + Redline

    Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate, Heap Leach Aeration and Other Mining Applications
    11/1/2023 - PDF - English - ASTM
    Learn More
    €71.00

  • UNE-EN ISO 13266:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
    10/31/2023 - PDF - Spanish - AENOR
    Learn More
    €57.00

  • UNE-EN ISO 13266:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
    10/31/2023 - PDF - English - AENOR
    Learn More
    €68.40

  • UNE-EN ISO 13267:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
    10/31/2023 - PDF - Spanish - AENOR
    Learn More
    €63.00

  • UNE-EN ISO 13267:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
    10/31/2023 - PDF - English - AENOR
    Learn More
    €75.60

  • UNE-EN ISO 13268:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
    10/31/2023 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN ISO 13268:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
    10/31/2023 - PDF - English - AENOR
    Learn More
    €72.00

  • NBN ISO 4982:2023

    Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Arch-shaped, corrugated wall chambers made of PE or PP used for retention, detention, storage and transportation of storm water systems — Product specifications and performance criteria ISO 4982:2023
    10/17/2023 - PDF - English - NBN
    Learn More
    €163.00

  • DIN EN ISO 13267:2023-09

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022), German version EN ISO 13267:2023
    9/1/2023 - PDF - German - DIN
    Learn More
    €72.80

  • DIN EN ISO 13268:2023-09

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022), German version EN ISO 13268:2023
    9/1/2023 - PDF - German - DIN
    Learn More
    €72.80

  • DIN EN ISO 13266:2023-09

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022), German version EN ISO 13266:2023
    9/1/2023 - PDF - German - DIN
    Learn More
    €59.63

  • ASTM F1960-23b

    Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
    9/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F1960-23b + Redline

    Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
    9/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • ASTM D3034-23

    Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
    9/1/2023 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM D3034-23 + Redline

    Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
    9/1/2023 - PDF - English - ASTM
    Learn More
    €72.00

  • ASTM D6041-23

    Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
    8/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM D6041-23 + Redline

    Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
    8/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • PD ISO/TS 16422-3:2023

    Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Fittings
    7/5/2023 - PDF - English - BSI
    Learn More
    €250.00

  • ASTM D2466-23

    Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
    7/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM D2466-23 + Redline

    Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
    7/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • ASTM F1866-23

    Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
    4/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F1866-23 + Redline

    Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
    4/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • ASTM F2735-23

    Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
    4/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F2735-23 + Redline

    Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
    4/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • ASTM F3348-23a

    Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    4/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F3348-23a + Redline

    Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    4/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • ASTM F3524/F3524M-23

    Standard Specification for Polyamide-12 (PA12) Line Pipe
    4/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F3524/F3524M-23 + Redline

    Standard Specification for Polyamide-12 (PA12) Line Pipe
    4/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • ASTM F438-23

    Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
    4/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F438-23 + Redline

    Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
    4/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • ASTM F2159-23a

    Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    3/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F2159-23a + Redline

    Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    3/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • DIN EN ISO 11296-9:2023-03

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022), German version EN ISO 11296-9:2022
    3/1/2023 - PDF - German - DIN
    Learn More
    €110.00

  • PD CEN/TS 17176-3:2022 + Redline

    Tracked Changes. Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fittings
    2/27/2023 - PDF - English - BSI
    Learn More
    €326.00

  • ASTM F1970-23

    Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
    2/15/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F1970-23 + Redline

    Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
    2/15/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • UNE-EN 1852-1:2018+A1:2023

    Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
    2/15/2023 - PDF - Spanish - AENOR
    Learn More
    €83.00

  • UNE-EN 1852-1:2018+A1:2023

    Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
    2/15/2023 - PDF - English - AENOR
    Learn More
    €99.60

  • BS EN ISO 13266:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
    2/2/2023 - PDF - English - BSI
    Learn More
    €180.00

  • ASTM F3347-23

    Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    2/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F3347-23 + Redline

    Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    2/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • ASTM F2145-23

    Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
    2/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F2145-23 + Redline

    Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
    2/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • BS EN ISO 13268:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
    1/25/2023 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN ISO 13267:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
    1/25/2023 - PDF - English - BSI
    Learn More
    €180.00

  • NBN EN ISO 13266:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)
    1/15/2023 - PDF - French - NBN
    Learn More
    €37.00

  • NBN EN ISO 13267:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage (ISO 13267:2022)
    1/15/2023 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN ISO 13266:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
    1/15/2023 - PDF - English - NBN
    Learn More
    €37.00

  • NBN EN ISO 13267:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
    1/15/2023 - PDF - English - NBN
    Learn More
    €58.00

  • NBN EN ISO 13266:2023

    Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Widerstandsfähigkeit gegen Belastungen der Oberfläche und Verkehrslasten (ISO 13266:2022)
    1/15/2023 - PDF - German - NBN
    Learn More
    €37.00

  • NBN EN ISO 13267:2023

    Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Böden von Kontroll- und Einsteigschächten aus Thermoplasten - Prüfverfahren für die Widerstandsfähigkeit gegen Einbeulen (ISO 13267:2022)
    1/15/2023 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN ISO 13268:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire (ISO 13268:2022)
    1/14/2023 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN ISO 13268:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
    1/14/2023 - PDF - English - NBN
    Learn More
    €58.00

  • NBN EN ISO 13268:2023

    Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Ringsteifigkeit (ISO 13268:2022)
    1/14/2023 - PDF - German - NBN
    Learn More
    €58.00

  • NF EN ISO 13266, P16-367 (01/2023)

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation
    1/1/2023 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF EN ISO 13267, P16-368 (01/2023)

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage
    1/1/2023 - Paper - French - AFNOR
    Learn More
    €60.67

  • NF EN ISO 13268, P16-369 (01/2023)

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire
    1/1/2023 - Paper - French - AFNOR
    Learn More
    €60.67

  • ASTM D2992-22

    Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
    12/1/2022 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM D2992-22 + Redline

    Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
    12/1/2022 - PDF - English - ASTM
    Learn More
    €65.00

  • UNE-EN 14541-1:2022

    Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
    11/16/2022 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN 14541-1:2022

    Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
    11/16/2022 - PDF - English - AENOR
    Learn More
    €62.40

  • BS EN ISO 11296-9:2022

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with a rigidly anchored plastics inner layer
    10/17/2022 - PDF - English - BSI
    Learn More
    €293.00

  • NBN EN ISO 11296-9:2022

    Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 9: Tubage par coffrage plastique interne rigidement ancré (ISO 11296-9:2022)
    10/13/2022 - PDF - French - NBN
    Learn More
    €142.00

  • NBN EN ISO 11296-9:2022

    Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) - Teil 9: Lining mit einer fest verankerten Kunststoffauskleidung (ISO 11296-9:2022)
    10/13/2022 - PDF - German - NBN
    Learn More
    €142.00

  • NBN EN ISO 11296-9:2022

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
    10/13/2022 - PDF - English - NBN
    Learn More
    €142.00

  • NF EN 17176-2+A1, T54-968-2 (10/2022)

    Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
    10/1/2022 - Paper - French - AFNOR
    Learn More
    €86.67

  • ASTM D3311-22

    Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
    10/1/2022 - PDF - English - ASTM
    Learn More
    €78.00

  • ASTM D3311-22 + Redline

    Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
    10/1/2022 - PDF - English - ASTM
    Learn More
    €93.00

  • BS EN ISO 15877-3:2009+A2:2021

    Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Fittings
    9/21/2022 - PDF - English - BSI
    Learn More
    €348.00

  • BS ISO 17885:2021

    Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
    8/15/2022 - PDF - English - BSI
    Learn More
    €331.00

  • NF EN 14420-2, T47-290-2 (08/2022)

    Hose fittings with clamp units - Part 2 : hose side parts of hose tail
    8/1/2022 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF EN 14420-4, T47-290-4 (08/2022)

    Raccords pour flexibles avec demi-coquille - Partie 4 : raccordements à bride
    8/1/2022 - Paper - French - AFNOR
    Learn More
    €60.67

  • NF EN 14420-7, T47-290-7 (08/2022)

    Raccords pour flexibles avec demi-coquille - Partie 7 : raccords à cames
    8/1/2022 - Paper - French - AFNOR
    Learn More
    €86.67

  • ASTM F409-22

    Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
    7/1/2022 - PDF - English - ASTM
    Learn More
    €57.00

  • ASTM F409-22 + Redline

    Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
    7/1/2022 - PDF - English - ASTM
    Learn More
    €68.00

  • ASTM D2122-22

    Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
    7/1/2022 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM D2122-22 + Redline

    Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
    7/1/2022 - PDF - English - ASTM
    Learn More
    €61.00

  • DIN CEN/TS 17176-3:2022-07

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings, German version CEN/TS 17176-3:2022
    7/1/2022 - PDF - German - DIN
    Learn More
    €68.60

  • PD CEN/TS 17176-3:2022

    Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fittings
    6/30/2022 - PDF - English - BSI
    Learn More
    €250.00

  • UNE-EN ISO 11296-7:2022

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
    5/25/2022 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN ISO 11296-7:2022

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
    5/25/2022 - PDF - English - AENOR
    Learn More
    €88.80

  • UNE-EN ISO 11298-4:2022

    Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
    5/25/2022 - PDF - Spanish - AENOR
    Learn More
    €96.00

  • UNE-EN ISO 11298-4:2022

    Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
    5/25/2022 - PDF - English - AENOR
    Learn More
    €115.20

  • BS 8561:2021 + Redline

    Tracked Changes. Specification for mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Requirements and test methods
    5/17/2022 - PDF - English - BSI
    Learn More
    €326.00

  • UNE-EN 1555-3:2022

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
    5/11/2022 - PDF - Spanish - AENOR
    Learn More
    €77.00

  • UNE-EN 1555-3:2022

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
    5/11/2022 - PDF - English - AENOR
    Learn More
    €92.40

  • NF EN 14541-1, P16-373-1 (05/2022)

    Tubes et raccords en plastique - Utilisation de recyclats thermoplastiques - Partie 1 : vocabulaire
    5/1/2022 - Paper - French - AFNOR
    Learn More
    €48.00

  • DIN EN ISO 15874-3:2022-05

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013 + Amd 1:2018 + Amd 2:2021), German and English version EN ISO 15874-3:2013 + A1:2018 + A2:2021.
    5/1/2022 - PDF - English, German - DIN
    Learn More
    €110.00

  • DIN EN ISO 15876-3:2022-05

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017 + Amd 1:2020 + Amd 2:2021), German and English version EN ISO 15876-3:2017 + A1:2020 + A2:2021.
    5/1/2022 - PDF - English, German - DIN
    Learn More
    €110.00

  • DIN EN ISO 22391-3:2022-05

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009 + Amd 1:2020 + Amd 2:2021), German and English version EN ISO 22391-3:2009 + A1:2020 + A2:2021.
    5/1/2022 - PDF - English, German - DIN
    Learn More
    €104.95

  • BS EN ISO 22391-3:2009+A2:2021

    Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Fittings
    4/22/2022 - PDF - English - BSI
    Learn More
    €293.00

  • CEN/TS 17176-3:2022

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
    4/9/2022 - PDF - German - NBN
    Learn More
    €121.00

  • CEN/TS 17176-3:2022

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
    4/9/2022 - PDF - English - NBN
    Learn More
    €121.00

  • DIN EN ISO 11298-4:2022-04

    Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021), German version EN ISO 11298-4:2021.
    4/1/2022 - PDF - German - DIN
    Learn More
    €126.26

  • BS EN ISO 15876-3:2017+A2:2021

    Plastics piping systems for hot and cold water installations. Polybutene (PB) Fittings
    3/23/2022 - PDF - English - BSI
    Learn More
    €293.00

  • BS EN ISO 15874-3:2013+A2:2021

    Plastics piping systems for hot and cold water installations. Polypropylene (PP) Fittings
    3/21/2022 - PDF - English - BSI
    Learn More
    €293.00

  • DIN EN ISO 15875-3:2022-03

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003 + Amd 1:2020 + Amd 2:2021), German and English version EN ISO 15875-3:2003 + A1:2020 + A2:2021.
    3/1/2022 - PDF - English, German - DIN
    Learn More
    €99.35

  • BS EN ISO 21003-3:2008+A1:2021

    Multilayer piping systems for hot and cold water installations inside buildings Fittings
    2/16/2022 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN ISO 15875-3:2003+A2:2021

    Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Fittings
    2/3/2022 - PDF - English - BSI
    Learn More
    €250.00

  • ASTM F3536-22

    Standard Specification for PE and PP Mechanical Fittings for use on NPS 3 or Smaller Cold-water Service Polyethylene (PE) or Crosslinked Polyethylene (PEX) Pipe or Tubing
    2/1/2022 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F3536-22 + Redline

    Standard Specification for PE and PP Mechanical Fittings for use on NPS 3 or Smaller Cold-water Service Polyethylene (PE) or Crosslinked Polyethylene (PEX) Pipe or Tubing
    2/1/2022 - PDF - English - ASTM
    Learn More
    €65.00

  • BS EN 1555-3:2021 + Redline

    Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
    1/17/2022 - PDF - English - BSI
    Learn More
    €382.00

  • DIN EN 1555-3:2021-12

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings, German version EN 1555-3:2021.
    12/1/2021 - PDF - German - DIN
    Learn More
    €104.95

  • BS 8561:2021

    Specification for mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Requirements and test methods
    11/25/2021 - PDF - English - BSI
    Learn More
    €250.00

  • BS ISO 10952:2021 + Redline

    Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack for the inside of a section in a deflected condition
    11/9/2021 - PDF - English - BSI
    Learn More
    €235.00

  • ASTM D2729-21

    Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
    11/1/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM D2729-21 + Redline

    Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
    11/1/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM F2880-21

    Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 34 in. to 65 in.
    11/1/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM F2880-21 + Redline

    Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 34 in. to 65 in.
    11/1/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • DIN EN ISO 11296-4:2021-11

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018 + Amd 1:2021), German version EN ISO 11296-4:2018 + A1:2021
    11/1/2021 - PDF - German - DIN
    Learn More
    €131.96

  • NBN EN ISO 15875-3:2003/A2:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
    10/29/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15875-3:2003/A2:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
    10/29/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 21003-3:2008/A1:2021

    Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
    10/29/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 21003-3:2008/A1:2021

    Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
    10/29/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-3:2017/A2:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
    10/29/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-3:2017/A2:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
    10/29/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15874-3:2013/A2:2021

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
    10/29/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15874-3:2013/A2:2021

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
    10/29/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 22391-3:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
    10/29/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 22391-3:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
    10/29/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15875-3:2003/A2:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
    10/29/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 21003-3:2008/A1:2021

    Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
    10/29/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-3:2017/A2:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
    10/29/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 15874-3:2013/A2:2021

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
    10/29/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 22391-3:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
    10/29/2021 - PDF - English - NBN
    Learn More
    €20.00

  • UNE-EN ISO 11299-2:2021

    Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
    10/27/2021 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-EN ISO 11299-2:2021

    Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
    10/27/2021 - PDF - English - AENOR
    Learn More
    €81.60

  • UNE-EN ISO 11299-1:2021

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
    10/27/2021 - PDF - Spanish - AENOR
    Learn More
    €70.00

  • UNE-EN ISO 11299-1:2021

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
    10/27/2021 - PDF - English - AENOR
    Learn More
    €84.00

  • UNE-EN ISO 11299-3:2021

    Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
    10/27/2021 - PDF - Spanish - AENOR
    Learn More
    €71.00

  • UNE-EN ISO 11299-3:2021

    Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
    10/27/2021 - PDF - English - AENOR
    Learn More
    €85.20

  • NBN EN ISO 15877-3:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
    10/16/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15877-3:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
    10/16/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15877-3:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
    10/16/2021 - PDF - English - NBN
    Learn More
    €20.00

  • BS ISO 7432:2021 + Redline

    Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
    10/4/2021 - PDF - English - BSI
    Learn More
    €326.00

  • NBN T 41-103:2021

    Glass-reinforced thermosetting plastics (GRP) piping systems based on unsaturated polyester resin (UP) ? Jacking and relining pipes - Specifications
    9/21/2021 - PDF - French - NBN
    Learn More
    €89.00

  • NBN T 41-103:2021

    Glass-reinforced thermosetting plastics (GRP) piping systems based on unsaturated polyester resin (UP) ? Jacking and relining pipes - Specifications
    9/21/2021 - PDF - Dutch - NBN
    Learn More
    €89.00

  • ASTM D3965-21

    Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
    9/1/2021 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM D3965-21 + Redline

    Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
    9/1/2021 - PDF - English - ASTM
    Learn More
    €53.00

  • PD ISO/TR 10358:2021

    Plastics pipes and fittings for industrial applications. Collection of data on combined chemical-resistance
    8/27/2021 - PDF - English - BSI
    Learn More
    €449.00

  • BS EN 1555-3:2021

    Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
    8/26/2021 - PDF - English - BSI
    Learn More
    €293.00

  • ASTM F2390-21

    Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
    8/1/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM F2390-21 + Redline

    Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
    8/1/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • NBN EN 1555-3:2021

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
    7/11/2021 - PDF - French - NBN
    Learn More
    €142.00

  • NBN EN 1555-3:2021

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
    7/11/2021 - PDF - German - NBN
    Learn More
    €142.00

  • NBN EN 1555-3:2021

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
    7/11/2021 - PDF - English - NBN
    Learn More
    €142.00

  • ASTM D3350-21

    Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    7/1/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM D3350-21 + Redline

    Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    7/1/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM F2785-21

    Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
    7/1/2021 - PDF - English - ASTM
    Learn More
    €57.00

  • ASTM F2785-21 + Redline

    Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
    7/1/2021 - PDF - English - ASTM
    Learn More
    €68.00

  • BS EN ISO 11296-4:2018+A1:2021

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with cured-in-place pipes
    6/14/2021 - PDF - English - BSI
    Learn More
    €348.00

  • PD CEN/TS 1046:2021

    Thermoplastics piping and ducting systems. Outside the building structures for gravity and pressurised systems. Trench installation
    6/9/2021 - PDF - English - BSI
    Learn More
    €293.00

  • NF EN ISO 23856, T57-234 (06/2021)

    Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Systèmes de canalisation en matières plastiques pour l'alimentation en eau, les branchements et les collecteurs d'assainissement avec ou sans pression - Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP)
    6/1/2021 - Paper - French - AFNOR
    Learn More
    €144.67

  • NBN EN ISO 11296-4:2018/A1:2021

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
    5/28/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 11296-4:2018/A1:2021

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
    5/28/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 11296-4:2018/A1:2021

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
    5/28/2021 - PDF - English - NBN
    Learn More
    €20.00

  • CEN/TS 1046:2021

    Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation
    5/28/2021 - PDF - English - NBN
    Learn More
    €163.00

  • CEN/TS 1046:2021

    Thermoplastische Rohrleitungs- und Schutzrohr-Systeme - Leitungsbau außerhalb der Gebäudestruktur für Rohrleitungssysteme zur Schwerkraftentwässerung und zur Wasserversorgung unter Druck - Verlegung im Rohrgraben
    5/28/2021 - PDF - German - NBN
    Learn More
    €163.00

  • NBN ISO 16611:2021

    Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests ISO 16611:2017
    5/26/2021 - PDF - English - NBN
    Learn More
    €121.00

  • BS ISO 12176-5:2021

    Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Two-dimensional data coding of components exchange format PE piping
    5/18/2021 - PDF - English - BSI
    Learn More
    €348.00

  • BS ISO 7432:2021

    Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
    5/12/2021 - PDF - English - BSI
    Learn More
    €250.00

  • ASTM F3190-21

    Standard Practice for Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene (PE) and Polyamide (PA) Pipe and Fittings
    5/1/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM F3190-21 + Redline

    Standard Practice for Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene (PE) and Polyamide (PA) Pipe and Fittings
    5/1/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM F2854-21

    Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
    5/1/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM F2854-21 + Redline

    Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
    5/1/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM F2881/F2881M-21e1

    Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
    5/1/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM F2881/F2881M-21e1 + Redline

    Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
    5/1/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • BS ISO 12176-2:2008+A1:2021

    Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Electrofusion
    4/30/2021 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 11298-4:2021

    Plastics piping systems for renovation of underground water supply networks Lining with cured-in-place pipes
    4/28/2021 - PDF - English - BSI
    Learn More
    €331.00

  • NBN EN ISO 11298-4:2021

    Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
    4/23/2021 - PDF - French - NBN
    Learn More
    €163.00

  • NBN EN ISO 11298-4:2021

    Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
    4/23/2021 - PDF - German - NBN
    Learn More
    €163.00

  • NBN EN ISO 11298-4:2021

    Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
    4/23/2021 - PDF - English - NBN
    Learn More
    €163.00

  • BS ISO 10952:2021

    Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack for the inside of a section in a deflected condition
    4/8/2021 - PDF - English - BSI
    Learn More
    €180.00

  • NF EN ISO 11298-4, T54-967-4 (04/2021)

    Plastics piping systems for renovation of underground water supply networks - Part 4 : lining with cured-in-place pipes
    4/1/2021 - Paper - French - AFNOR
    Learn More
    €108.33

  • ASTM F794-21

    Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
    4/1/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM F794-21 + Redline

    Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
    4/1/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM D2609-21

    Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
    4/1/2021 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM D2609-21 + Redline

    Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
    4/1/2021 - PDF - English - ASTM
    Learn More
    €53.00

Items 1 to 200 of 931 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5