23.040.45 : Plastics fittings
-
NBN EN ISO 7510:2024
Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants (ISO 7510:2017)
2/7/2024 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 7510:2024
Kunststoff-Rohrleitungssysteme - Teile aus glasfaserverstärkten Kunststoffen (GFK) - Ermittlung der Gehalte von Bestandteilen (ISO 7510:2017)
2/7/2024 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 7510:2024
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)
2/7/2024 - PDF - English - NBN
Learn More€89.00 -
NBN EN 12201-3:2024
Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 3 : Raccords
1/31/2024 - PDF - French - NBN
Learn More€163.00 -
NBN EN 12201-3:2024
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
1/31/2024 - PDF - English - NBN
Learn More€163.00 -
NBN ISO 4982:2023
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Arch-shaped, corrugated wall chambers made of PE or PP used for retention, detention, storage and transportation of storm water systems — Product specifications and performance criteria ISO 4982:2023
10/17/2023 - PDF - English - NBN
Learn More€163.00 -
NBN EN ISO 13266:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)
1/15/2023 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage (ISO 13267:2022)
1/15/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
1/15/2023 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
1/15/2023 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 13266:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Widerstandsfähigkeit gegen Belastungen der Oberfläche und Verkehrslasten (ISO 13266:2022)
1/15/2023 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Böden von Kontroll- und Einsteigschächten aus Thermoplasten - Prüfverfahren für die Widerstandsfähigkeit gegen Einbeulen (ISO 13267:2022)
1/15/2023 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire (ISO 13268:2022)
1/14/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
1/14/2023 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Ringsteifigkeit (ISO 13268:2022)
1/14/2023 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 11296-9:2022
Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 9: Tubage par coffrage plastique interne rigidement ancré (ISO 11296-9:2022)
10/13/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) - Teil 9: Lining mit einer fest verankerten Kunststoffauskleidung (ISO 11296-9:2022)
10/13/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
10/13/2022 - PDF - English - NBN
Learn More€142.00 -
CEN/TS 17176-3:2022
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
4/9/2022 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 17176-3:2022
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
4/9/2022 - PDF - English - NBN
Learn More€121.00 -
NBN EN ISO 15875-3:2003/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
10/29/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15875-3:2003/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
10/29/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 21003-3:2008/A1:2021
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
10/29/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 21003-3:2008/A1:2021
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
10/29/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
10/29/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
10/29/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15874-3:2013/A2:2021
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
10/29/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15874-3:2013/A2:2021
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
10/29/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 22391-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
10/29/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 22391-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
10/29/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15875-3:2003/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
10/29/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 21003-3:2008/A1:2021
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
10/29/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
10/29/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 15874-3:2013/A2:2021
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
10/29/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 22391-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
10/29/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 15877-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
10/16/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15877-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
10/16/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15877-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
10/16/2021 - PDF - English - NBN
Learn More€20.00 -
NBN T 41-103:2021
Glass-reinforced thermosetting plastics (GRP) piping systems based on unsaturated polyester resin (UP) ? Jacking and relining pipes - Specifications
9/21/2021 - PDF - French - NBN
Learn More€89.00 -
NBN T 41-103:2021
Glass-reinforced thermosetting plastics (GRP) piping systems based on unsaturated polyester resin (UP) ? Jacking and relining pipes - Specifications
9/21/2021 - PDF - Dutch - NBN
Learn More€89.00 -
NBN EN 1555-3:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
7/11/2021 - PDF - French - NBN
Learn More€142.00 -
NBN EN 1555-3:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
7/11/2021 - PDF - German - NBN
Learn More€142.00 -
NBN EN 1555-3:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
7/11/2021 - PDF - English - NBN
Learn More€142.00 -
NBN EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
5/28/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
5/28/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
5/28/2021 - PDF - English - NBN
Learn More€20.00 -
CEN/TS 1046:2021
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation
5/28/2021 - PDF - English - NBN
Learn More€163.00 -
CEN/TS 1046:2021
Thermoplastische Rohrleitungs- und Schutzrohr-Systeme - Leitungsbau außerhalb der Gebäudestruktur für Rohrleitungssysteme zur Schwerkraftentwässerung und zur Wasserversorgung unter Druck - Verlegung im Rohrgraben
5/28/2021 - PDF - German - NBN
Learn More€163.00 -
NBN ISO 16611:2021
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests ISO 16611:2017
5/26/2021 - PDF - English - NBN
Learn More€121.00 -
NBN EN ISO 11298-4:2021
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
4/23/2021 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 11298-4:2021
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
4/23/2021 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 11298-4:2021
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
4/23/2021 - PDF - English - NBN
Learn More€163.00 -
NBN EN ISO 15875-3:2003/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
1/27/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15875-3:2003/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
1/27/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 22391-3:2009/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
1/27/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 22391-3:2009/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
1/27/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
1/27/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
1/27/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15875-3:2003/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
1/27/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 22391-3:2009/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
1/27/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
1/27/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN 17176-5:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
5/23/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN 17176-5:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
5/23/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN 17176-5:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
5/23/2019 - PDF - English - NBN
Learn More€58.00 -
NBN EN 17176-1:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
5/23/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN 17176-1:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
5/23/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN 17176-1:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
5/23/2019 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 11296-7:2019
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
3/26/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 11296-7:2019
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
3/26/2019 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 11299-2:2019
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
1/30/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 11299-2:2019
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
1/30/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 11299-2:2019
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
1/30/2019 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 11299-1:2019
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
1/30/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 11299-1:2019
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
1/30/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 11299-1:2019
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
1/30/2019 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 11299-3:2019
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
1/30/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 11299-3:2019
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
1/30/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 11299-3:2019
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
1/30/2019 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
11/27/2018 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
11/27/2018 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
11/27/2018 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
11/27/2018 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
11/27/2018 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
11/27/2018 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 19893:2018
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
10/30/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 19893:2018
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
10/30/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 19893:2018
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
10/30/2018 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
9/19/2018 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
9/19/2018 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
9/19/2018 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 15874-3:2013/A1:2018
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 3: Raccords - Amendement 1 (ISO 15874-3:2013/Amd 1:2018)
8/28/2018 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15874-3:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
8/28/2018 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
6/20/2018 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
6/20/2018 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
6/20/2018 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
6/20/2018 - PDF - French - NBN
Learn More€121.00 -
NBN EN ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
6/20/2018 - PDF - English - NBN
Learn More€121.00 -
NBN EN ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
4/27/2018 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
4/27/2018 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
4/27/2018 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
4/27/2018 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
4/27/2018 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
4/27/2018 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
4/27/2018 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 11296-1:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) — Teil 1: Allgemeines (ISO 11296-1:2018)
4/27/2018 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 11297-1:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Abwasserdruckleitungen - Teil 1: Allgemeines (ISO 11297-1:2018)
4/27/2018 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
3/23/2018 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
3/23/2018 - PDF - English - NBN
Learn More€163.00 -
NBN EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
3/23/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
3/23/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
3/23/2018 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
3/23/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
3/23/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
3/23/2018 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
3/23/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
3/23/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
3/23/2018 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
3/23/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
3/23/2018 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 11296-4:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) - Teil 4: Vor Ort härtendes Schlauch-Lining (ISO 11296-4:2018)
3/23/2018 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 11297-4:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Abwasserdruckleitungen - Teil 4: Vor Ort härtendes Schlauch-Lining (ISO 11297-4:2018)
3/23/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 13263:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
11/22/2017 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 13263:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
11/22/2017 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 13263:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
11/22/2017 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 13262:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
11/22/2017 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 13262:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
11/22/2017 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 13262:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
11/22/2017 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 2507-3:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
11/22/2017 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 2507-3:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
11/22/2017 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 2507-3:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
11/22/2017 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 13264:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
11/22/2017 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 13264:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
11/22/2017 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 13264:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
11/22/2017 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 2507-2:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
11/22/2017 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 2507-2:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
11/22/2017 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 2507-2:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
11/22/2017 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 2507-1:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
11/22/2017 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 2507-1:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
11/22/2017 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 2507-1:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
11/22/2017 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 13260:2011/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
10/25/2017 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 13260:2011/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
10/25/2017 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 13260:2011/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
10/25/2017 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 15876-3:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017)
3/22/2017 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 15876-3:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017)
3/22/2017 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 15876-3:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017)
3/22/2017 - PDF - English - NBN
Learn More€89.00 -
NBN T 42-605:2016
Plastics piping systems - Factory-made plastic fittings for connection to concrete drainage and sewerage elements - Requirements and methods of test
8/26/2016 - PDF - French - NBN
Learn More€58.00 -
NBN T 42-605:2016
Plastics piping systems - Factory-made plastic fittings for connection to concrete drainage and sewerage elements - Requirements and methods of test
8/26/2016 - PDF - Dutch - NBN
Learn More€58.00 -
NBN EN ISO 17778:2015
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)
5/22/2015 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 17778:2015
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)
5/22/2015 - PDF - English - NBN
Learn More€37.00 -
NBN T 42-116:2015
Plastics piping systems - PE 100 pipes with high resistance against slow crack propagation (PE 100-RC pipes) - Specifications and methods of test
2/2/2015 - PDF - French - NBN
Learn More€58.00 -
NBN T 42-116:2015
Plastics piping systems - PE 100 pipes with high resistance against slow crack propagation (PE 100-RC pipes) - Specifications and methods of test
2/2/2015 - PDF - Dutch - NBN
Learn More€58.00 -
NBN T 42-115:2015
Plastics piping systems - Infiltration-transport sewer (IT sewer) for rainwater - Requirements and test methods
2/1/2015 - PDF - French - NBN
Learn More€58.00 -
NBN T 42-115:2015
Plastics piping systems - Infiltration-transport sewer (IT sewer) for rainwater - Requirements and test methods
2/1/2015 - PDF - Dutch - NBN
Learn More€58.00 -
NBN EN 16506:2014
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
11/28/2014 - PDF - French - NBN
Learn More€142.00 -
NBN EN 16506:2014
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
11/28/2014 - PDF - German - NBN
Learn More€142.00 -
NBN EN 16506:2014
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
11/28/2014 - PDF - English - NBN
Learn More€142.00 -
NBN EN ISO 15874-3:2013
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013)
4/26/2013 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 15874-3:2013
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013)
4/26/2013 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 15874-3:2013
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013)
4/26/2013 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 10147:2013
Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content (ISO 10147:2011)
2/22/2013 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 10147:2013
Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content (ISO 10147:2011)
2/22/2013 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 10147:2013
Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content (ISO 10147:2011)
2/22/2013 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 13260:2011
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010)
10/21/2011 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 13260:2011
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010)
10/21/2011 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 13260:2011
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010)
10/21/2011 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 15877-3/A1:2010
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1 (ISO 15877-3:2009/AMD 1:2010)
12/17/2010 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15877-3/A1:2010
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1 (ISO 15877-3:2009/AMD 1:2010)
12/17/2010 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15877-3/A1:2010
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1 (ISO 15877-3:2009/AMD 1:2010)
12/17/2010 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 1452-3:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009, corrected version 2010-03-01)
11/26/2010 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 1452-3:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009, corrected version 2010-03-01)
11/26/2010 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 1452-3:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009, corrected version 2010-03-01)
11/26/2010 - PDF - English - NBN
Learn More€163.00 -
NBN EN ISO 1452-5:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system (ISO 1452-5:2009, corrected version 2010-03-01)
11/26/2010 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 1452-5:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system (ISO 1452-5:2009, corrected version 2010-03-01)
11/26/2010 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 1452-5:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system (ISO 1452-5:2009, corrected version 2010-03-01)
11/26/2010 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 22391-3:2010
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009)
2/19/2010 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 22391-3:2010
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009)
2/19/2010 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 22391-3:2010
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009)
2/19/2010 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 1452-2:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009)
2/19/2010 - PDF - French - NBN
Learn More€121.00 -
NBN EN ISO 1452-2:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009)
2/19/2010 - PDF - German - NBN
Learn More€121.00 -
NBN EN ISO 1452-2:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009)
2/19/2010 - PDF - English - NBN
Learn More€121.00 -
NBN EN ISO 1452-4:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves (ISO 1452-4:2009)
2/19/2010 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 1452-4:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves (ISO 1452-4:2009)
2/19/2010 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 1452-4:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves (ISO 1452-4:2009)
2/19/2010 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 1452-1:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
2/19/2010 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 1452-1:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
2/19/2010 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 1452-1:2010
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
2/19/2010 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 13967:2010
Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
2/19/2010 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 13967:2010
Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
2/19/2010 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 13967:2010
Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
2/19/2010 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 12162:2010
Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
1/22/2010 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 12162:2010
Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
1/22/2010 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 12162:2010
Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
1/22/2010 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 15877-3:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2009)
5/20/2009 - PDF - French - NBN
Learn More€121.00 -
NBN EN ISO 15877-3:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2009)
5/20/2009 - PDF - German - NBN
Learn More€121.00 -
NBN EN ISO 15877-3:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2009)
5/20/2009 - PDF - English - NBN
Learn More€121.00 -
NBN EN ISO 21003-3:2008
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
11/26/2008 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 21003-3:2008
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
11/26/2008 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 21003-3:2008
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
11/26/2008 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 1167-3:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
1/29/2008 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 1167-3:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
1/29/2008 - PDF - German - NBN
Learn More€58.00