23.040.45 : Plastics fittings

Items 1 to 200 of 937 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • BS EN ISO 11296-4:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with cured-in-place pipes
    5/13/2020 - PDF - English - BSI
    Learn More
    €284.40

  • PR NF EN ISO 15875-3/A1, T54-943-3/A1PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €63.66

  • PR NF EN ISO 22391-3/A1, T54-982-3/A1PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €55.49

  • PR NF EN ISO 15876-3/A1, T54-944-3/A1PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €55.49

  • 20/30409941 DC:2020

    BS ISO 13266. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
    3/25/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30409935 DC:2020

    BS ISO 13268. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
    3/25/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30409938 DC:2020

    BS ISO 13267. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
    3/20/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30405516 DC:2020

    BS EN ISO 15876-3 AMD1. Plastics piping systems for hot and cold water installations. Polybutene (PB) Part 3. Fittings
    2/28/2020 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN ISO 11298-3:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11299-3:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11298-1:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground water supply networks General
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11297-3:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11299-1:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground gas supply networks General
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • 20/30405184 DC:2020

    BS EN ISO 15875-3 AMD1. Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Part 3. Fittings
    2/27/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30405540 DC:2020

    BS EN ISO 22391-3 AMD1. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Part 3. Fittings
    2/27/2020 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN ISO 11297-1:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground drainage and sewerage networks under pressure General
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS ISO 12176-1:2017 + Redline

    Tracked Changes. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Butt
    2/26/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS ISO 10928:2016 + Redline

    Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
    2/26/2020 - PDF - English - BSI
    Learn More
    €391.29

  • BS EN ISO 15876-3:2017 + Redline

    Tracked Changes. Plastics piping systems for hot and cold water installations. Polybutene (PB) Fittings
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11296-3:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with close-fit pipes
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11296-1:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks General
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS ISO 4427-3:2019 + Redline

    Tracked Changes. Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Fittings
    2/24/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS ISO 4427-1:2019 + Redline

    Tracked Changes. Plastics piping systems for water supply and drainage sewerage under pressure. Polyethylene (PE) General
    2/24/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS ISO 4427-2:2019 + Redline

    Tracked Changes. Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Pipes
    2/24/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11296-7:2019 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes
    2/24/2020 - PDF - English - BSI
    Learn More
    €280.37

  • ASTM F949-20

    Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
    2/15/2020 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F949-20 + Redline

    Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
    2/15/2020 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM F3347-20

    Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing
    2/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F3347-20 + Redline

    Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing
    2/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F3348-20

    Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing
    2/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F3348-20 + Redline

    Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing
    2/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • UNE-EN ISO 13257:2020

    Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
    1/8/2020 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • UNE-EN ISO 13257:2020

    Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
    1/8/2020 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-CEN/TS 17176-3:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
    12/26/2019 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-CEN/TS 17176-3:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
    12/26/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • UNE-EN 17176-1:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
    12/26/2019 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN 17176-1:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
    12/26/2019 - PDF - English - AENOR
    Learn More
    €62.00

  • UNE-EN 17176-2:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
    12/26/2019 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN 17176-2:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
    12/26/2019 - PDF - English - AENOR
    Learn More
    €72.00

  • UNE-EN 17176-5:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
    12/26/2019 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN 17176-5:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
    12/26/2019 - PDF - English - AENOR
    Learn More
    €62.00

  • ASTM F512-19

    Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
    11/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F512-19 + Redline

    Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
    11/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F2434-19

    Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
    11/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2434-19 + Redline

    Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
    11/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F1960-19a

    Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
    11/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F1960-19a + Redline

    Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
    11/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • 19/30397146 DC:2019

    BS EN 1555-3. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Part 3. Fittings
    10/10/2019 - PDF - English - BSI
    Learn More
    €23.70

  • UNE-EN ISO 11297-3:2019

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
    9/25/2019 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN ISO 11297-3:2019

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
    9/25/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • UNE-EN ISO 11298-3:2019

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    9/25/2019 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN ISO 11298-3:2019

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    9/25/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • UNE-EN ISO 11296-3:2019

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
    9/11/2019 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN ISO 11296-3:2019

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
    9/11/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • BS ISO 4427-2:2019

    Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Pipes
    8/19/2019 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 4427-5:2019

    Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Fitness purpose of the system
    8/15/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 4427-3:2019

    Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Fittings
    8/15/2019 - PDF - English - BSI
    Learn More
    €253.59

  • BS ISO 4427-1:2019

    Plastics piping systems for water supply and drainage sewerage under pressure. Polyethylene (PE) General
    8/15/2019 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 8533:2019

    Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of cemented or wrapped joints
    8/7/2019 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 8483:2019

    Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of bolted flange joints
    8/7/2019 - PDF - English - BSI
    Learn More
    €215.67

  • ASTM D2513-19

    Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
    8/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D2513-19 + Redline

    Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
    8/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • PR NF EN ISO 11298-4, T54-967-4PR (08/2019)

    Systèmes de canalisation en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 4 : tubage continu par tubes polymérisés sur place
    8/1/2019 - Paper - English, French - AFNOR
    Learn More
    €136.26

  • PR NF EN ISO 23856, T57-234PR (08/2019)

    Systèmes de canalisation en matières plastiques pour l'alimentation en eau, les branchements et les collecteurs d'assainissement avec ou sans pression - Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP)
    8/1/2019 - Paper - English, French - AFNOR
    Learn More
    €145.65

  • ASTM D3840-19

    Standard Specification for “,Fiberglass”, (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
    8/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D3840-19 + Redline

    Standard Specification for “,Fiberglass”, (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
    8/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F1924-19

    Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
    8/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F1924-19 + Redline

    Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
    8/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D2444-19

    Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
    8/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D2444-19 + Redline

    Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
    8/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F439-19

    Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
    8/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F439-19 + Redline

    Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
    8/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F2159-19a

    Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    8/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2159-19a + Redline

    Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    8/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • 19/30390737 DC:2019

    BS EN ISO 11298-4. Plastics piping systems for renovation of underground water supply networks Part 4. Lining with cured-in-place pipes
    6/18/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30385511 DC:2019

    BS ISO 21307 AMD1. Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) piping systems
    5/21/2019 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN 17176-1:2019

    Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) General
    5/3/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN 17176-5:2019

    Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fitness purpose of the system
    5/3/2019 - PDF - English - BSI
    Learn More
    €154.05

  • UNE-EN ISO 19893:2019

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
    4/30/2019 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN ISO 19893:2019

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
    4/30/2019 - PDF - English - AENOR
    Learn More
    €61.00

  • UNE-EN ISO 19892:2019

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
    4/30/2019 - PDF - Spanish - AENOR
    Learn More
    €38.00

  • UNE-EN ISO 19892:2019

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
    4/30/2019 - PDF - English - AENOR
    Learn More
    €45.00

  • 19/30363786 DC:2019

    BS ISO 12176-5. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Part 5. Two-dimensional data coding of components exchange format PE piping
    4/12/2019 - PDF - English - BSI
    Learn More
    €23.70

  • NF EN 17176-2, T54-968-2 (04/2019)

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes - Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF EN 17176-1, T54-968-1 (04/2019)

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General - Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 1 : Généralités
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN 17176-5, T54-968-5 (04/2019)

    Plastic piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system - Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 5 : Aptitude à l'emploi du système
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €51.24

  • ASTM F2881/F2881M-19

    Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
    4/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2881/F2881M-19 + Redline

    Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
    4/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F1970-19

    Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
    4/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F1970-19 + Redline

    Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
    4/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D5685-19

    Standard Specification for “,Fiberglass”, (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
    4/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D5685-19 + Redline

    Standard Specification for “,Fiberglass”, (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
    4/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • NBN EN ISO 11296-7:2019

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
    3/26/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 11296-7:2019

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
    3/26/2019 - PDF - French - NBN
    Learn More
    €45.00

  • PR NF EN 13598-1, P16-363-1PR (03/2019)

    Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVCU), polypropylène (PP) et polyéthylène (PE) - Partie 1 : spécifications relatives aux raccords auxiliaires et aux boîtes de branchement peu profondes - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVCU), polypropylène (PP) et polyéthylène (PE) - Partie 1 : Spécifications relatives aux raccords auxiliaires et aux boîtes de
    3/1/2019 - Paper - English, French - AFNOR
    Learn More
    €113.71

  • UNE-CEN ISO/TS 15877-7:2018

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
    3/1/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • BS EN ISO 11296-7:2019

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes
    2/18/2019 - PDF - English - BSI
    Learn More
    €215.67

  • NF EN ISO 11296-7, P16-364-7 (02/2019)

    Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 7 : tubage par enroulement hélicoïdal - Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 7: Tubage par enroulement hélicoïdal avec espace annulaire
    2/1/2019 - Paper - French - AFNOR
    Learn More
    €64.01

  • ASTM F2620-19

    Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
    2/1/2019 - PDF - English - ASTM
    Learn More
    €67.00

  • ASTM F2620-19 + Redline

    Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
    2/1/2019 - PDF - English - ASTM
    Learn More
    €80.00

  • NBN EN ISO 11299-1:2019

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
    1/30/2019 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 11299-1:2019

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
    1/30/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 11299-1:2019

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
    1/30/2019 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 11299-3:2019

    Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
    1/30/2019 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 11299-3:2019

    Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
    1/30/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 11299-3:2019

    Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
    1/30/2019 - PDF - French - NBN
    Learn More
    €45.00

  • 19/30390552 DC:2019

    BS ISO 21138-3. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 3. Pipes fittings with non-smooth external surface, Type B
    1/25/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30390551 DC:2019

    BS ISO 21138-2. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 2. Pipes fittings with smooth external surface, Type A
    1/25/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30362372 DC:2019

    BS ISO 21138-1. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 1. Material specification performance criteria pipes, fittings the system
    1/22/2019 - PDF - English - BSI
    Learn More
    €23.70

  • ASTM F2206-19

    Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)
    1/15/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2206-19 + Redline

    Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)
    1/15/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F2618-19

    Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
    1/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2618-19 + Redline

    Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
    1/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F1290-19

    Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
    1/1/2019 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM F1290-19 + Redline

    Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
    1/1/2019 - PDF - English - ASTM
    Learn More
    €48.00

  • UNE-EN ISO 15874-3:2013/A1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
    12/26/2018 - PDF - Spanish - AENOR
    Learn More
    €29.00

  • UNE-EN ISO 15874-3:2013/A1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
    12/26/2018 - PDF - English - AENOR
    Learn More
    €34.00

  • UNE-EN ISO 21225-1:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
    12/26/2018 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN ISO 21225-1:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
    12/26/2018 - PDF - English - AENOR
    Learn More
    €72.00

  • UNE-EN ISO 21225-2:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
    12/26/2018 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN ISO 21225-2:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
    12/26/2018 - PDF - English - AENOR
    Learn More
    €72.00

  • BS EN ISO 11299-3:2018

    Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes
    12/12/2018 - PDF - English - BSI
    Learn More
    €215.67

  • BS EN ISO 11299-1:2018

    Plastics piping systems for renovation of underground gas supply networks General
    12/11/2018 - PDF - English - BSI
    Learn More
    €215.67

  • BS EN ISO 11299-2:2018

    Plastics piping systems for renovation of underground gas supply networks Lining with continuous pipes
    12/11/2018 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 19893:2018

    Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling
    12/7/2018 - PDF - English - BSI
    Learn More
    €130.35

  • NF EN ISO 11299-1, T54-966-1 (12/2018)

    Plastics piping systems for renovation of underground gas supply networks - Part 1 : general - Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés de distribution de gaz - Partie 1 : Généralités
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €64.01

  • NF EN ISO 11299-3, T54-966-3 (12/2018)

    Plastics piping systems for renovation of underground gas supply networks - Part 3 : lining with close-fit pipes - Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés de distribution de gaz - Partie 3 : Tubage par tuyau continu sans espace annulaire
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €64.01

  • NF EN ISO 11299-2, T54-966-2 (12/2018)

    Plastics piping systems for renovation of underground gas supply networks - Part 2 : tining with continuous pipes - Systèmes de canalisation en plastique pour la rénovation des réseaux enterrés de distribution de gaz - Partie 2 : Tubage par tuyau continu avec espace annulaire
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €51.24

  • DIN 16728:2018-12

    Pipes and fittings made of unfilled, non-reinforced and crosslinked polyethylene (PE-X) - Determination of the degree of crosslinking through rheological measurement of the storage modulus, Text in German and English
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €75.40

  • DIN EN ISO 11298-3:2018-12

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018), German version EN ISO 11298-3:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €89.00

  • DIN EN ISO 19893:2018-12

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011), German version EN ISO 19893:2018
    12/1/2018 - - - DIN
    Learn More
    From: €68.30

  • NBN EN ISO 11297-3:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
    11/27/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 11297-3:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
    11/27/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 11297-3:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
    11/27/2018 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 11298-3:2018

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    11/27/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 11298-3:2018

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    11/27/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 11298-3:2018

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    11/27/2018 - PDF - French - NBN
    Learn More
    €45.00

  • UNE-EN ISO 11296-4:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
    11/7/2018 - PDF - Spanish - AENOR
    Learn More
    €78.00

  • UNE-EN ISO 11296-4:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
    11/7/2018 - PDF - English - AENOR
    Learn More
    €93.00

  • UNE-EN ISO 11297-1:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
    11/7/2018 - PDF - Spanish - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 11297-1:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
    11/7/2018 - PDF - English - AENOR
    Learn More
    €69.00

  • UNE-EN ISO 11298-1:2018

    Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
    11/7/2018 - PDF - Spanish - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 11298-1:2018

    Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
    11/7/2018 - PDF - English - AENOR
    Learn More
    €69.00

  • DIN 16875:2018-11

    Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for ducting - Dimensions and technical delivery conditions
    11/1/2018 - PDF - German - DIN
    Learn More
    €82.60

  • DIN EN ISO 15874-3:2018-11

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013 + Amd. 1:2018), German and English version EN ISO 15874-3:2013 + A1:2018
    11/1/2018 - PDF - English, German - DIN
    Learn More
    €125.30

  • ASTM D6041-18

    Standard Specification for Contact-Molded “,Fiberglass”, (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
    11/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D6041-18 + Redline

    Standard Specification for Contact-Molded “,Fiberglass”, (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
    11/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F2735-18

    Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
    11/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2735-18 + Redline

    Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
    11/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • BS EN ISO 11298-3:2018

    Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes
    10/18/2018 - PDF - English - BSI
    Learn More
    €215.67

  • BS EN ISO 11297-3:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes
    10/17/2018 - PDF - English - BSI
    Learn More
    €215.67

  • BS EN ISO 15874-3:2013+A1:2018

    Plastics piping systems for hot and cold water installations. Polypropylene (PP) Fittings
    10/9/2018 - PDF - English - BSI
    Learn More
    €215.67

  • NF EN ISO 11298-3, T54-967-3 (10/2018)

    Plastics piping systems for renovation of underground water supply networks - Part 3 : lining with close-fit pipes - Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 3 : tubage par tuyau continu sans espace annulaire
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €64.01

  • NF EN ISO 11297-3, P16-378-3 (10/2018)

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3 : lining with close-fit pipes - Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sous pression - Partie 3: Tubage par tuyau continu sans espace annulaire
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €64.01

  • BS EN ISO 11296-3:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with close-fit pipes
    9/27/2018 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 7432:2018

    Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
    9/21/2018 - PDF - English - BSI
    Learn More
    €154.05

  • NBN EN ISO 11296-3:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
    9/19/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 11296-3:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
    9/19/2018 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 11296-3:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
    9/19/2018 - PDF - French - NBN
    Learn More
    €45.00

  • UNE-EN ISO 11297-2:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
    9/19/2018 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • UNE-EN ISO 11297-2:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
    9/19/2018 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN ISO 11297-4:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
    9/19/2018 - PDF - Spanish - AENOR
    Learn More
    €56.00

  • UNE-EN ISO 11297-4:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
    9/19/2018 - PDF - English - AENOR
    Learn More
    €67.00

  • BS ISO 10508:2006+A1:2018

    Plastics piping systems for hot and cold water installations. Guidance for classification and design
    9/6/2018 - PDF - English - BSI
    Learn More
    €154.05

  • UNE-EN ISO 11296-1:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
    9/5/2018 - PDF - Spanish - AENOR
    Learn More
    €57.00

  • UNE-EN ISO 11296-1:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
    9/5/2018 - PDF - English - AENOR
    Learn More
    €68.00

  • NF EN ISO 19893, T54-940 (09/2018)

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling - Systèmes de canalisations en plastique - Tubes thermoplastiques et raccords pour eau chaude et froide - Méthode d'essai de la résistance des assemblages à des cycles de température
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 19892, T54-942 (09/2018)

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling - Systèmes de canalisations en plastiques - Tubes en matières thermoplastiques et raccords pour l'eau chaude et froide - Méthode d'essai de la résistance des assemblages aux cycles de pression
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €29.39

  • ISO 11297-3:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
    9/1/2018 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 11297-3:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
    9/1/2018 - Paper - French - ISO
    Learn More
    €92.00

  • ISO 7432:2018

    Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
    9/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • ASTM F2785-18a

    Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
    9/1/2018 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F2785-18a + Redline

    Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
    9/1/2018 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM F2945-18

    Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
    9/1/2018 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F2945-18 + Redline

    Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
    9/1/2018 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM D1599-18

    Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
    9/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D1599-18 + Redline

    Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
    9/1/2018 - PDF - English - ASTM
    Learn More
    €48.00

  • DIN EN ISO 11297-4:2018-09

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018), German version EN ISO 11297-4:2018
    9/1/2018 - - - DIN
    Learn More
    From: €82.60

  • DIN EN ISO 11296-4:2018-09

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018), German version EN ISO 11296-4:2018
    9/1/2018 - - - DIN
    Learn More
    From: €130.80

  • DIN EN ISO 11296-1:2018-09

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018), German version EN ISO 11296-1:2018
    9/1/2018 - - - DIN
    Learn More
    From: €89.00

  • DIN EN ISO 11297-1:2018-09

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018), German version EN ISO 11297-1:2018
    9/1/2018 - - - DIN
    Learn More
    From: €89.00

  • BS EN ISO 2507-2:2017

    Thermoplastics pipes and fittings. Vicat softening temperature Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated (PVC-C) fittings high impact resistance poly (vinyl (PVC-HI)
    8/3/2018 - PDF - English - BSI
    Learn More
    €130.35

  • BS EN ISO 11298-2:2018

    Plastics piping systems for renovation of underground water supply networks Lining with continuous pipes
    8/2/2018 - PDF - English - BSI
    Learn More
    €154.05

  • NF EN ISO 15874-3/A1, T54-938-3/A1 (08/2018)

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : fittings - Amendment 1 - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 3: Raccords - Amendement 1
    8/1/2018 - Paper - French - AFNOR
    Learn More
    €21.90

  • DIN 16961-1:2018-08

    Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Classification and dimensions
    8/1/2018 - PDF - German - DIN
    Learn More
    €75.40

  • DIN 16961-2:2018-08

    Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications
    8/1/2018 - PDF - German - DIN
    Learn More
    €103.00

  • ASTM F2928-18

    Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
    8/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2928-18 + Redline

    Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
    8/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F402-18

    Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
    8/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM F402-18 + Redline

    Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
    8/1/2018 - PDF - English - ASTM
    Learn More
    €48.00

  • BS 10012:2017+A1:2018

    Data protection. Specification for a personal information management system
    7/31/2018 - PDF - English - BSI
    Learn More
    €165.90

  • UNE-EN ISO 11296-2:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
    7/25/2018 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • UNE-EN ISO 11296-2:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
    7/25/2018 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN ISO 11298-2:2018

    Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
    7/25/2018 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • UNE-EN ISO 11298-2:2018

    Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
    7/25/2018 - PDF - English - AENOR
    Learn More
    €64.00

  • BS ISO 18489:2015

    Polyethylene (PE) materials for piping systems. Determination of resistance to slow crack growth under cyclic loading. Cracked Round Bar test method
    7/2/2018 - PDF - English - BSI
    Learn More
    €154.05

  • ISO 15874-3:2013/Amd 1:2018

    Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 1
    7/1/2018 - Paper - English - ISO
    Learn More
    €17.00

  • ISO 15874-3:2013/Amd 1:2018

    Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 1
    7/1/2018 - Paper - French - ISO
    Learn More
    €17.00

  • DIN EN ISO 11298-1:2018-07

    Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018), German version EN ISO 11298-1:2018
    7/1/2018 - - - DIN
    Learn More
    From: €89.00

  • BS EN ISO 21225-1:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks Replacement on line by pipe bursting and extraction
    6/7/2018 - PDF - English - BSI
    Learn More
    €215.67

Items 1 to 200 of 937 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5