23.040.20 : Plastics pipes
-
ISO 6964:2019
Polyolefin pipes and fittings
Determination of carbon black content by calcination and pyrolysis
2/27/2019 - Paper - English - ISO
Learn More€72.00 -
ISO 10146:2019
Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX)
Effect of time and temperature on expected strength
2/26/2019 - Paper - English - ISO
Learn More€72.00 -
ISO 13257:2018
Thermoplastics piping systems for non-pressure applications
Test method for resistance to elevated temperature cycling
11/8/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 13257:2018
Thermoplastics piping systems for non-pressure applications
Test method for resistance to elevated temperature cycling
11/8/2018 - Paper - English - ISO
Learn More€72.00 -
ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks
Part 2: Lining with continuous pipes
10/26/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks
Part 2: Lining with continuous pipes
10/26/2018 - Paper - English - ISO
Learn More€72.00 -
ISO 15874-2:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
6/25/2018 - Paper - French - ISO
Learn More€21.00 -
ISO 15874-5:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
6/25/2018 - Paper - French - ISO
Learn More€21.00 -
ISO 10471:2018
Glass-reinforced thermosetting plastics (GRP) pipes
Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
5/17/2018 - Paper - English - ISO
Learn More€72.00 -
ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 1: Replacement on the line by pipe bursting and pipe extraction
3/28/2018 - Paper - French - ISO
Learn More€110.00 -
ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 2: Replacement off the line by horizontal directional drilling and impact moling
3/28/2018 - Paper - French - ISO
Learn More€148.00 -
ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 1: Replacement on the line by pipe bursting and pipe extraction
3/28/2018 - Paper - English - ISO
Learn More€110.00 -
ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 2: Replacement off the line by horizontal directional drilling and impact moling
3/28/2018 - Paper - English - ISO
Learn More€148.00 -
ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks
Part 1: General
2/16/2018 - Paper - French - ISO
Learn More€110.00 -
ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure
Part 2: Lining with continuous pipes
1/24/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks
Part 2: Lining with continuous pipes
1/24/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks
Part 2: Lining with continuous pipes
1/24/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks
Part 2: Lining with continuous pipes
1/24/2018 - Paper - English - ISO
Learn More€72.00 -
€72.00
-
ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure
Part 4: Lining with cured-in-place pipes
1/11/2018 - Paper - French - ISO
Learn More€72.00 -
ISO 161-1:2018 (R2023)
Thermoplastics pipes for the conveyance of fluids
Nominal outside diameters and nominal pressures
1/8/2018 - Paper - English - ISO
Learn More€48.00 -
ISO 11922-1:2018 (R2023)
Thermoplastics pipes for the conveyance of fluids
Dimensions and tolerances
1/8/2018 - Paper - English - ISO
Learn More€110.00 -
ISO 21307:2017 (R2023)
Plastics pipes and fittings
Butt fusion jointing procedures for polyethylene (PE) piping systems
11/30/2017 - Paper - English - ISO
Learn More€110.00 -
ISO/TS 12512:2017 (R2021)
Glass reinforced thermosetting plastic (GRP) pipes
Determination of initial specific ring stiffness using segment test species cut from a pipe
7/19/2017 - Paper - English - ISO
Learn More€148.00 -
ISO 13761:2017 (R2023)
Plastics pipes and fittings
Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
7/18/2017 - Paper - English - ISO
Learn More€48.00 -
ISO 7510:2017 (R2022)
Plastics piping systems
Glass-reinforced plastics (GRP) components
6/28/2017 - Paper - English - ISO
Learn More€48.00 -
ISO/TS 20656-1:2017 (R2023)
Plastics piping systems
General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes
6/13/2017 - Paper - English - ISO
Learn More€148.00 -
ISO 15876-2:2017 (R2022)
Plastics piping systems for hot and cold water installations
Polybutene (PB)
1/10/2017 - Paper - French - ISO
Learn More€110.00 -
ISO 15876-5:2017 (R2022)
Plastics piping systems for hot and cold water installations
Polybutene (PB)
1/10/2017 - Paper - French - ISO
Learn More€72.00 -
ISO/TS 17902:2016 (R2024)
Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
General information
11/4/2016 - Paper - English - ISO
Learn More€110.00 -
€72.00
-
€72.00
-
€72.00
-
€72.00
-
ISO 18489:2015 (R2023)
Polyethylene (PE) materials for piping systems
Determination of resistance to slow crack growth under cyclic loading
9/2/2015 - Paper - English - ISO
Learn More€72.00 -
ISO 18488:2015 (R2020)
Polyethylene (PE) materials for piping systems
Determination of Strain Hardening Modulus in relation to slow crack growth
8/20/2015 - Paper - English - ISO
Learn More€72.00 -
€72.00
-
€72.00
-
€72.00
-
ISO 6259-1:2015 (R2020)
Thermoplastics pipes
Determination of tensile properties
3/26/2015 - Paper - English - ISO
Learn More€72.00 -
€48.00
-
ISO 17778:2015 (R2022)
Plastics piping systems
Fittings, valves and ancillaries
3/16/2015 - Paper - English - ISO
Learn More€48.00 -
ISO 18851:2015 (R2020)
Plastics piping systems
Glass-reinforced thermosetting plastics (GRP) pipes and fittings
3/16/2015 - Paper - English - ISO
Learn More€72.00 -
ISO 7509:2015 (R2020)
Plastics piping systems
Glass-reinforced thermosetting plastics (GRP) pipes
3/4/2015 - Paper - English - ISO
Learn More€72.00 -
ISO 17484-1:2014 (R2019)
Plastics piping systems
Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa)
5/23/2014 - Paper - English - ISO
Learn More€174.00 -
ISO/TS 11619:2014
Polyurethane tubing for use primarily in pneumatic installations
Dimensions and specification
2/11/2014 - Paper - English - ISO
Learn More€72.00 -
ISO 15874-1:2013 (R2023)
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
2/14/2013 - Paper - French - ISO
Learn More€72.00 -
ISO 15874-5:2013 (R2023)
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
2/14/2013 - Paper - French - ISO
Learn More€72.00 -
ISO 15874-2:2013 (R2023)
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
2/13/2013 - Paper - French - ISO
Learn More€110.00 -
ISO 9080:2012 (R2023)
Plastics piping and ducting systems
Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
10/11/2012 - Paper - French - ISO
Learn More€174.00 -
ISO 9080:2012 (R2023)
Plastics piping and ducting systems
Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
10/11/2012 - Paper - English - ISO
Learn More€174.00 -
ISO/TS 16479:2012 (R2024)
Thermoplastics pipes for the conveyance of fluids
Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
10/1/2012 - Paper - English - ISO
Learn More€148.00 -
ISO 12230:2012 (R2022)
Polybutene-1 (PB-1) pipes
Effect of time and temperature on the expected strength
6/1/2012 - Paper - English - ISO
Learn More€72.00 -
ISO 23228:2011 (R2022)
Thermoplastics pipes for the conveyance of fluids
Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
9/29/2011 - Paper - English - ISO
Learn More€72.00 -
ISO 19899:2010 (R2021)
Plastics piping systems
Polyolefin pipes and mechanical fitting assemblies
8/30/2010 - Paper - English - ISO
Learn More€72.00 -
ISO 13254:2010 (R2021)
Thermoplastics piping systems for non-pressure applications
Test method for watertightness
4/19/2010 - Paper - French - ISO
Learn More€48.00 -
ISO 13255:2010 (R2021)
Thermoplastics piping systems for soil and waste discharge inside buildings
Test method for airtightness of joints
4/19/2010 - Paper - French - ISO
Learn More€48.00 -
ISO 13254:2010 (R2021)
Thermoplastics piping systems for non-pressure applications
Test method for watertightness
4/19/2010 - Paper - English - ISO
Learn More€48.00 -
ISO 13255:2010 (R2021)
Thermoplastics piping systems for soil and waste discharge inside buildings
Test method for airtightness of joints
4/19/2010 - Paper - English - ISO
Learn More€48.00 -
ISO 13229:2010 (R2021)
Thermoplastics piping systems for non-pressure applications
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
3/8/2010 - Paper - French - ISO
Learn More€48.00 -
ISO 13229:2010 (R2021)
Thermoplastics piping systems for non-pressure applications
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
3/8/2010 - Paper - English - ISO
Learn More€48.00 -
ISO 1452-1:2009 (R2019)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure
Unplasticized poly(vinyl chloride) (PVC-U)
12/1/2009 - Paper - French - ISO
Learn More€72.00 -
ISO 22391-2:2009 (R2019)
Plastics piping systems for hot and cold water installations
Polyethylene of raised temperature resistance (PE-RT)
11/24/2009 - Paper - French - ISO
Learn More€110.00 -
ISO 12162:2009 (R2021)
Thermoplastics materials for pipes and fittings for pressure applications
Classification, designation and design coefficient
10/27/2009 - Paper - French - ISO
Learn More€72.00 -
ISO 12162:2009 (R2021)
Thermoplastics materials for pipes and fittings for pressure applications
Classification, designation and design coefficient
10/27/2009 - Paper - English - ISO
Learn More€72.00 -
ISO 3213:2009 (R2020)
Polypropylene (PP) pipes
Effect of time and temperature on the expected strength
9/16/2009 - Paper - French - ISO
Learn More€110.00 -
ISO 3213:2009 (R2020)
Polypropylene (PP) pipes
Effect of time and temperature on the expected strength
9/16/2009 - Paper - English - ISO
Learn More€110.00 -
ISO 24033:2009
Polyethylene of raised temperature resistance (PE-RT) pipes
Effect of time and temperature on the expected strength
1/7/2009 - Paper - English - ISO
Learn More€72.00 -
ISO 17484-2:2009 (R2019)
Plastics piping systems
Multilayer pipe systems for indoor gas installations
1/5/2009 - Paper - English - ISO
Learn More€72.00 -
€48.00
-
ISO 13968:2008 (R2023)
Plastics piping and ducting systems
Thermoplastics pipes
10/2/2008 - Paper - English - ISO
Learn More€48.00 -
ISO 13477:2008 (R2023)
Thermoplastics pipes for the conveyance of fluids
Determination of resistance to rapid crack propagation (RCP)
3/20/2008 - Paper - French - ISO
Learn More€110.00 -
ISO 13477:2008 (R2023)
Thermoplastics pipes for the conveyance of fluids
Determination of resistance to rapid crack propagation (RCP)
3/20/2008 - Paper - English - ISO
Learn More€110.00 -
ISO 18373-2:2008 (R2021)
Rigid PVC pipes
Differential scanning calorimetry (DSC) method
2/5/2008 - Paper - English - ISO
Learn More€72.00 -
ISO 13478:2007 (R2021)
Thermoplastics pipes for the conveyance of fluids
Determination of resistance to rapid crack propagation (RCP)
8/8/2007 - Paper - English - ISO
Learn More€110.00 -
ISO 13478:2007 (R2021)
Thermoplastics pipes for the conveyance of fluids
Determination of resistance to rapid crack propagation (RCP)
8/8/2007 - Paper - French - ISO
Learn More€110.00 -
ISO 18373-1:2007 (R2021)
Rigid PVC pipes
Differential scanning calorimetry (DSC) method
7/3/2007 - Paper - English - ISO
Learn More€72.00 -
ISO 9852:2007 (R2023)
Unplasticized poly(vinyl chloride) (PVC-U) pipes
Dichloromethane resistance at specified temperature (DCMT)
5/4/2007 - Paper - French - ISO
Learn More€48.00 -
ISO 9852:2007 (R2023)
Unplasticized poly(vinyl chloride) (PVC-U) pipes
Dichloromethane resistance at specified temperature (DCMT)
5/4/2007 - Paper - English - ISO
Learn More€48.00 -
€0.00
-
ISO 15875-5:2003/Cor 1:2007
Plastics piping systems for hot and cold water installations
Crosslinked polyethylene (PE-X)
1/18/2007 - Paper - French - ISO
Learn More€0.00 -
€48.00
-
€72.00
-
€72.00
-
ISO/TS 18226:2006 (R2020)
Plastics pipes and fittings
Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
9/18/2006 - Paper - English - ISO
Learn More€199.00 -
€48.00
-
€48.00
-
€72.00
-
ISO/TS 7024:2005 (R2022)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Thermoplastics
9/19/2005 - Paper - French - ISO
Learn More€199.00 -
ISO/TS 7024:2005 (R2022)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Thermoplastics
9/19/2005 - Paper - English - ISO
Learn More€199.00 -
€48.00
-
€48.00
-
ISO 11673:2005 (R2019)
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes
Determination of the fracture toughness properties
4/11/2005 - Paper - French - ISO
Learn More€110.00 -
ISO 11673:2005 (R2019)
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes
Determination of the fracture toughness properties
4/11/2005 - Paper - English - ISO
Learn More€110.00 -
€148.00
-
ISO 8796:2004 (R2023)
Polyethylene PE 32 and PE 40 pipes for irrigation laterals
Susceptibility to environmental stress cracking induced by insert-type fittings
6/18/2004 - Paper - French - ISO
Learn More€48.00 -
ISO 8796:2004 (R2023)
Polyethylene PE 32 and PE 40 pipes for irrigation laterals
Susceptibility to environmental stress cracking induced by insert-type fittings
6/18/2004 - Paper - English - ISO
Learn More€48.00 -
ISO 15875-2:2003 (R2014)
Plastics piping systems for hot and cold water installations
Crosslinked polyethylene (PE-X)
12/8/2003 - Paper - French - ISO
Learn More€72.00 -
ISO 15875-5:2003 (R2014)
Plastics piping systems for hot and cold water installations
Crosslinked polyethylene (PE-X)
12/8/2003 - Paper - French - ISO
Learn More€72.00 -
ISO 7671:2003 (R2019)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Polypropylene (PP)
11/19/2003 - Paper - French - ISO
Learn More€148.00 -
ISO 7671:2003 (R2019)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Polypropylene (PP)
11/19/2003 - Paper - English - ISO
Learn More€148.00 -
ISO 7682:2003 (R2014)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Acrylonitrile-butadiene-styrene (ABS)
11/18/2003 - Paper - French - ISO
Learn More€174.00 -
ISO 8770:2003 (R2020)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Polyethylene (PE)
11/18/2003 - Paper - French - ISO
Learn More€148.00 -
ISO 7682:2003 (R2014)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Acrylonitrile-butadiene-styrene (ABS)
11/18/2003 - Paper - English - ISO
Learn More€174.00 -
ISO 8770:2003 (R2020)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Polyethylene (PE)
11/18/2003 - Paper - English - ISO
Learn More€148.00 -
ISO 7675:2003 (R2020)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Chlorinated poly(vinyl chloride) (PVC-C)
5/26/2003 - Paper - French - ISO
Learn More€174.00 -
ISO 7675:2003 (R2020)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Chlorinated poly(vinyl chloride) (PVC-C)
5/26/2003 - Paper - English - ISO
Learn More€174.00 -
ISO 4435:2003 (R2020)
Plastics piping systems for non-pressure underground drainage and sewerage
Unplasticized poly(vinyl chloride) (PVC-U)
2/13/2003 - Paper - French - ISO
Learn More€148.00 -
ISO 4435:2003 (R2020)
Plastics piping systems for non-pressure underground drainage and sewerage
Unplasticized poly(vinyl chloride) (PVC-U)
2/13/2003 - Paper - English - ISO
Learn More€148.00 -
ISO 3633:2002 (R2007)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Unplasticized poly(vinyl chloride) (PVC-U)
9/5/2002 - Paper - French - ISO
Learn More€174.00 -
ISO 3633:2002 (R2007)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Unplasticized poly(vinyl chloride) (PVC-U)
9/5/2002 - Paper - English - ISO
Learn More€174.00 -
ISO 18553:2002 (R2023)
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
General information
3/28/2002 - Paper - French - ISO
Learn More€72.00 -
ISO 18553:2002 (R2023)
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
General information
3/28/2002 - Paper - English - ISO
Learn More€72.00 -
ISO 8795:2001 (R2023)
Plastics piping systems for the transport of water intended for human consumption
Migration assessment
3/1/2001 - Paper - French - ISO
Learn More€110.00 -
ISO 7511:1999 (R2022)
Plastics piping systems
Glass-reinforced thermosetting plastics (GRP) pipes and fittings
3/18/1999 - Paper - English - ISO
Learn More€48.00 -
ISO 13966:1998 (R2019)
Thermoplastics pipes and fittings
Nominal ring stiffnesses
7/9/1998 - Paper - English - ISO
Learn More€48.00 -
ISO 13966:1998 (R2019)
Thermoplastics pipes and fittings
Nominal ring stiffnesses
7/9/1998 - Paper - French - ISO
Learn More€48.00 -
ISO 13760:1998 (R2019)
Plastics pipes for the conveyance of fluids under pressure
Miner's rule
5/14/1998 - Paper - French - ISO
Learn More€48.00 -
ISO 13760:1998 (R2019)
Plastics pipes for the conveyance of fluids under pressure
Miner's rule
5/14/1998 - Paper - English - ISO
Learn More€48.00 -
€110.00
-
€110.00
-
€110.00
-
€110.00
-
€72.00
-
€72.00
-
€72.00
-
€72.00
-
€72.00
-
€72.00
-
ISO 11922-2:1997 (R2019)
Thermoplastics pipes for the conveyance of fluids
Dimensions and tolerances
4/3/1997 - Paper - English - ISO
Learn More€110.00 -
ISO 11922-2:1997 (R2019)
Thermoplastics pipes for the conveyance of fluids
Dimensions and tolerances
4/3/1997 - Paper - French - ISO
Learn More€110.00 -
ISO 161-2:1996 (R2019)
Thermoplastics pipes for the conveyance of fluids
Nominal outside diameters and nominal pressures
12/26/1996 - Paper - French - ISO
Learn More€48.00 -
ISO 161-2:1996 (R2019)
Thermoplastics pipes for the conveyance of fluids
Nominal outside diameters and nominal pressures
12/26/1996 - Paper - English - ISO
Learn More€48.00 -
ISO 9896:1996 (R2022)
Plastics traps for discharge pipework systems inside buildings
General information
4/18/1996 - Paper - French - ISO
Learn More€174.00 -
ISO 9896:1996 (R2022)
Plastics traps for discharge pipework systems inside buildings
General information
4/18/1996 - Paper - English - ISO
Learn More€174.00 -
€48.00
-
€48.00
-
ISO 2507-1:1995
Thermoplastics pipes and fittings
Vicat softening temperature
2/2/1995 - Paper - French - ISO
Learn More€48.00 -
ISO 2507-2:1995
Thermoplastics pipes and fittings
Vicat softening temperature
2/2/1995 - Paper - French - ISO
Learn More€48.00 -
ISO 2507-3:1995 (R2017)
Thermoplastics pipes and fittings
Vicat softening temperature
2/2/1995 - Paper - French - ISO
Learn More€48.00 -
ISO 2507-1:1995
Thermoplastics pipes and fittings
Vicat softening temperature
2/2/1995 - Paper - English - ISO
Learn More€48.00 -
ISO 2507-2:1995
Thermoplastics pipes and fittings
Vicat softening temperature
2/2/1995 - Paper - English - ISO
Learn More€48.00 -
ISO 2507-3:1995 (R2017)
Thermoplastics pipes and fittings
Vicat softening temperature
2/2/1995 - Paper - English - ISO
Learn More€48.00 -
ISO 3127:1994 (R2022)
Thermoplastics pipes
Determination of resistance to external blows
12/1/1994 - Paper - French - ISO
Learn More€72.00 -
ISO 11173:1994 (R2022)
Thermoplastics pipes
Determination of resistance to external blows
12/1/1994 - Paper - French - ISO
Learn More€48.00 -
ISO 3127:1994 (R2022)
Thermoplastics pipes
Determination of resistance to external blows
12/1/1994 - Paper - English - ISO
Learn More€72.00 -
ISO 11173:1994 (R2022)
Thermoplastics pipes
Determination of resistance to external blows
12/1/1994 - Paper - English - ISO
Learn More€48.00 -
ISO/TR 10501:1993 (R2022)
Thermoplastics pipes for the transport of liquids under pressure
Calculation of head losses
12/23/1993 - Paper - French - ISO
Learn More€48.00 -
ISO/TR 10501:1993 (R2022)
Thermoplastics pipes for the transport of liquids under pressure
Calculation of head losses
12/23/1993 - Paper - English - ISO
Learn More€48.00 -
ISO 8283-4:1992 (R2019)
Plastics pipes and fittings
Dimensions of sockets and spigots for discharge systems inside buildings
12/3/1992 - Paper - French - ISO
Learn More€72.00 -
ISO 8283-4:1992 (R2019)
Plastics pipes and fittings
Dimensions of sockets and spigots for discharge systems inside buildings
12/3/1992 - Paper - English - ISO
Learn More€72.00 -
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
ISO 265-1:1988 (R2021)
Pipes and fittings of plastics materials
Fittings for domestic and industrial waste pipes
12/29/1988 - Paper - French - ISO
Learn More€148.00 -
ISO 265-1:1988 (R2021)
Pipes and fittings of plastics materials
Fittings for domestic and industrial waste pipes
12/29/1988 - Paper - English - ISO
Learn More€148.00 -
ISO 7245:1984 (R2021)
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS)
General specification for moulding and extrusion materials
11/1/1984 - Paper - French - ISO
Learn More€48.00 -
ISO 7246:1984 (R2021)
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA)
General specification for moulding and extrusion materials
11/1/1984 - Paper - French - ISO
Learn More€48.00 -
ISO 7245:1984 (R2021)
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS)
General specification for moulding and extrusion materials
11/1/1984 - Paper - English - ISO
Learn More€48.00 -
ISO 7246:1984 (R2021)
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA)
General specification for moulding and extrusion materials
11/1/1984 - Paper - English - ISO
Learn More€48.00 -
ISO 4439:1979 (R2020)
Unplasticized polyvinyl chloride (PVC) pipes and fittings
Determination and specification of density
7/1/1979 - Paper - French - ISO
Learn More€48.00 -
ISO 4439:1979 (R2020)
Unplasticized polyvinyl chloride (PVC) pipes and fittings
Determination and specification of density
7/1/1979 - Paper - English - ISO
Learn More€48.00 -
ISO 4059:1978 (R2020)
Polyethylene (PE) pipes
Pressure drop in mechanical pipe-jointing systems
9/1/1978 - Paper - French - ISO
Learn More€48.00 -
ISO 4059:1978 (R2020)
Polyethylene (PE) pipes
Pressure drop in mechanical pipe-jointing systems
9/1/1978 - Paper - English - ISO
Learn More€48.00 -
ISO 3114:1977 (R2023)
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply
Extractability of lead and tin
3/1/1977 - Paper - French - ISO
Learn More€48.00 -
ISO 3514:1976 (R2022)
Chlorinated polyvinyl chloride (CPVC) pipes and fittings
Specification and determination of density
2/1/1976 - Paper - French - ISO
Learn More€48.00 -
ISO 3514:1976 (R2022)
Chlorinated polyvinyl chloride (CPVC) pipes and fittings
Specification and determination of density
2/1/1976 - Paper - English - ISO
Learn More€48.00