23.040.20 : Plastics pipes
-
NF EN 17878-3, E39-021-3 (03/2024)
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 3 : exigences et méthodes d'essai pour les systèmes non bloqués avec tubes de service en plastique
3/1/2024 - Paper - French -
Learn More€68.50 -
NF EN 17878-1, E39-021-1 (03/2024)
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 1 : classification, exigences générales et méthodes d'essai
3/1/2024 - Paper - French -
Learn More€93.50 -
NF EN 17878-2, E39-021-2 (03/2024)
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 2 : exigences et méthodes d'essai pour les systèmes bloqués avec tubes de service en plastique
3/1/2024 - Paper - French -
Learn More€68.50 -
NF EN ISO 7510, T57-210 (02/2024)
Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants
2/1/2024 - Paper - French -
Learn More€48.00 -
PR NF EN 12100, T54-930PR (01/2024)
Systèmes de canalisations en plastiques - Robinets en polyéthylène (PE) - Méthode d'essai de résistance à la flexion entre supports
1/1/2024 - Paper - English, French -
Learn More€56.00 -
PR NF EN 1680, T54-920PR (01/2024)
Systèmes de canalisations en plastique - Robinets pour les systèmes de canalisations en polyéthylène (PE) - Méthode d'essai d'étanchéité sous et après une flexion appliquée au mécanisme d'entraînement
1/1/2024 - Paper - English, French -
Learn More€56.00 -
NF EN 17670-2, P16-370-2 (11/2023)
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Manholes, inspection chambers and road gullies for storm water systems made of unplasticized polyvinyl chloride (PVC-U), polypropylene (PP) and polyethylene - Systèmes de canalisations en plastique pour le transport et le stockage souterrains sans pression de l'eau non potable - Regards, boîtes d'inspection et de branchement et bouches d'égout pour les réseaux d'eaux pluviales en poly(chlorure de vinyle) non plastifié (PVC-U), en polypropylène (PP)
11/1/2023 - Paper - French -
Learn More€119.00 -
NF EN ISO 2505, T54-021 (10/2023)
Tubes en matières thermoplastiques - Retrait longitudinal à chaud - Méthode d'essai et paramètres
10/1/2023 - Paper - French -
Learn More€48.00 -
NF EN ISO 10468, T57-212 (08/2023)
Tubes en plastiques thermodurcissables renforcés de verre (PRV) - Détermination des propriétés de fluage annulaires en conditions humides ou sèches
8/1/2023 - Paper - French -
Learn More€60.67 -
PR NF ISO 11619, E49-100PR (04/2023)
Transmissions pneumatiques - Tubes en polyuréthane et en polyamide destinés à être utilisés principalement dans des installations pneumatiques - Dimensions et spécifications
4/1/2023 - Paper - English, French -
Learn More€80.50 -
NF EN 14758-1, P16-366-1 (04/2023)
Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Polypropylène avec modificateurs minéraux (PP-MD) - Partie 1 : spécifications pour les tubes, les raccords et le système
4/1/2023 - Paper - French -
Learn More€108.33 -
NF EN ISO 13268, P16-369 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire
1/1/2023 - Paper - French -
Learn More€60.67 -
NF EN ISO 13266, P16-367 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation
1/1/2023 - Paper - French -
Learn More€48.00 -
NF EN ISO 13267, P16-368 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage
1/1/2023 - Paper - French -
Learn More€60.67 -
NF EN ISO 11296-9, P16-296-9 (10/2022)
Plastics piping systems for the renovation of underground non-pressure drainage and sewerage networks - Part 9 : Lining with a rigidly anchored plastics inner layer
10/1/2022 - Paper - French -
Learn More€99.33 -
NF EN 17176-2+A1, T54-968-2 (10/2022)
Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
10/1/2022 - Paper - French -
Learn More€86.67 -
NF EN 17176-2/IN1, T54-968-2/IN1 (10/2022)
Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
10/1/2022 - Paper - French -
Learn More€43.50 -
NF EN ISO 15874-2/A2, T54-938-2/A2 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : Pipes - Amendement 2 : Impact test (ISO 15874-2:2013/DAM 2:2021)
6/1/2022 - Paper - French -
Learn More€48.00 -
NF EN ISO 13479, T54-909 (06/2022)
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
6/1/2022 - Paper - French -
Learn More€75.67 -
NF EN ISO 15874-1/A1, T54-938-1/A1 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : General - Amendment 1 : Impact test (ISO 15874-1:2013/DAM 1:2021)
6/1/2022 - Paper - French -
Learn More€25.67 -
NF EN 14541-1, P16-373-1 (05/2022)
Tubes et raccords en plastique - Utilisation de recyclats thermoplastiques - Partie 1 : vocabulaire
5/1/2022 - Paper - French -
Learn More€48.00 -
NF EN ISO 13844, T54-923 (02/2022)
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation
2/1/2022 - Paper - French -
Learn More€48.00 -
NF EN ISO 15877-3/A2, T54-014-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3 : Fittings - Amendment 2
10/1/2021 - Paper - French -
Learn More€75.67 -
NF EN ISO 15875-3/A2, T54-943-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3 : Fittings - Amendment 2 (ISO 15875-3:2003/DAM 2:2020)
10/1/2021 - Paper - French -
Learn More€48.00 -
NF EN ISO 15876-3/A2, T54-944-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : Fittings - Amendment 2 (ISO 15876-3:2017/DAM 2:2020)
10/1/2021 - Paper - French -
Learn More€43.50 -
NF EN ISO 22391-3/A2, T54-982-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : Fittings - Amendment 2
10/1/2021 - Paper - French -
Learn More€60.67 -
NF EN ISO 15874-3/A2, T54-938-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : Fittings - Amendment 2 (ISO 15874-3:2013/DAM 2:2020)
10/1/2021 - Paper - French -
Learn More€48.00 -
NF EN 1555-5, T54-065-5 (07/2021)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5 : Fitness for purpose of the system
7/1/2021 - Paper - French -
Learn More€60.67 -
NF EN 1555-2, T54-065-2 (07/2021)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2 : Pipes
7/1/2021 - Paper - French -
Learn More€86.67 -
NF EN 1555-4, T54-065-4 (07/2021)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : Valves
7/1/2021 - Paper - French -
Learn More€86.67 -
NF EN 1555-1, T54-065-1 (07/2021)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1 : General
7/1/2021 - Paper - French -
Learn More€86.67 -
NF EN ISO 23856, T57-234 (06/2021)
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Systèmes de canalisation en matières plastiques pour l'alimentation en eau, les branchements et les collecteurs d'assainissement avec ou sans pression - Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP)
6/1/2021 - Paper - French -
Learn More€144.67 -
XP CEN/TS 12007-6, M50-005-6 (04/2021)
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 6 : specific functional recommendations for unplasticized polyamide (PA-U)
4/1/2021 - Paper - French -
Learn More€86.67 -
NF EN ISO 11298-4, T54-967-4 (04/2021)
Plastics piping systems for renovation of underground water supply networks - Part 4 : lining with cured-in-place pipes
4/1/2021 - Paper - French -
Learn More€108.33 -
NF EN ISO 15876-2/A1, T54-944-2/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2 : pipes - Amendment 1
12/1/2020 - Paper - French -
Learn More€25.67 -
NF EN ISO 22391-2/A1, T54-982-2/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2 : pipes - Amendment 1
12/1/2020 - Paper - French -
Learn More€25.67 -
NF EN ISO 15875-5/A1, T54-943-5/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5 : fitness for purpose of the system - Amendment 1
12/1/2020 - Paper - French -
Learn More€34.67 -
NF EN ISO 15876-5/A1, T54-944-5/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5 : fitness for purpose of the system - Amendment 1
12/1/2020 - Paper - French -
Learn More€34.67 -
NF EN ISO 22391-3/A1, T54-982-3/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : fittings - Amendment 1
12/1/2020 - Paper - French -
Learn More€34.67 -
NF EN ISO 15875-2/A2, T54-943-2/A2 (12/2020)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2 : pipes - Amendment 2
12/1/2020 - Paper - French -
Learn More€34.67 -
NF EN ISO 15877-5/A2, T54-014-5/A2 (12/2020)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5 : fitness for purpose of the system - Amendment 2
12/1/2020 - Paper - French -
Learn More€34.67 -
NF EN ISO 15877-2/A2, T54-014-2/A2 (12/2020)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2 : pipes - Amendment 2
12/1/2020 - Paper - French -
Learn More€25.67 -
NF EN ISO 15875-3/A1, T54-943-3/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3 : fittings - Amendment 1
12/1/2020 - Paper - French -
Learn More€25.67 -
NF EN ISO 22391-5/A1, T54-982-5/A1 (12/2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5 : fitness for purpose of the system - Amendment 1
12/1/2020 - Paper - French -
Learn More€34.67 -
NF EN ISO 15494/A1, T54-946/A1 (11/2020)
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 - Systèmes de canalisations en matières plastiques pour les applications industrielles - Polybutène (PB), polyéthylène (PE), polyéthylène de meilleure résistance à la température (PE-RT), polyéthylène réticulé (PE-X), polypropylène (PP) - Séries métriques pour les spécifications pour les composants
11/1/2020 - Paper - French -
Learn More€25.50 -
NF EN ISO 6259-2, T54-955-2 (09/2020)
Thermoplastics pipes - Determination of tensile properties - Part 2 : pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) - Tubes en matières thermoplastiques - Détermination des caractéristiques en traction - Partie 2 : tubes en poly(chlorure de vinyle) non plastifié (PVC-U), poly(chlorure de vinyle) non plastifié orienté (PVC-O), poly(chlorure de vinyle) chloré (PVC-C) et poly(chlorure de vinyle) à résistance au choc
9/1/2020 - Paper - French -
Learn More€60.67 -
NF EN 13476-2+A1, P16-353-2 (06/2020)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2 : specifications for pipes and fittings with smooth internal and external surface and the system, Type A - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 2 : spécifications pour les
6/1/2020 - Paper - French -
Learn More€119.00 -
NF EN 13476-3/IN1, P16-353-3/IN1 (06/2020)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3 : specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 3 : Spécifications pour les
6/1/2020 - Paper - French -
Learn More€23.00 -
NF EN 13476-3+A1, P16-353-3 (06/2020)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3 : specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 3 : spécifications pour les
6/1/2020 - Paper - French -
Learn More€119.00 -
NF EN 13598-2, P16-363-2 (05/2020)
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2 : Specifications for manholes and inspection chambers - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 2 : Spécifications relatives aux rega
5/1/2020 - Paper - French -
Learn More€99.33 -
NF EN 16436-1/IN3, D36-381-1/IN3 (05/2020)
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1 : hoses and tubings
5/1/2020 - Paper - French -
Learn More€23.00 -
NF ISO 14743, E49-055 (05/2020)
Pneumatic fluid power - Push-in connectors for thermoplastic tubes
5/1/2020 - Paper - French -
Learn More€99.33 -
NF EN 13598-1, P16-363-1 (05/2020)
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1 : specifications for ancillary fittings and shallow chambers - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVCU), polypropylène (PP) et polyéthylène (PE) - Partie 1 : Spécifications relatives aux raccords auxiliaires et aux boîtes de
5/1/2020 - Paper - French -
Learn More€86.67 -
NF EN 16436-1+A3, D36-381-1 (05/2020)
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1 : hoses and tubings
5/1/2020 - Paper - French -
Learn More€75.67 -
PR NF EN 16436-1+A2/A3, D36-387-1+A2/A3PR (12/2019)
Tuyaux,tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane, le butane et leurs mélanges en phase vapeur - Partie 1: Tuyaux et tubes
12/1/2019 - Paper - English, French -
Learn More€35.50 -
NF EN 17176-5, T54-968-5 (04/2019)
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5 : fitness for purpose of the system
4/1/2019 - Paper - French -
Learn More€60.50 -
NF EN 1519-1, T54-917-1 (04/2019)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1 : requirements for pipes, fittings and the system - Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure du bâtiments - Polyéthylène (PE) - Partie 1 : Exigences pour tubes, raccords et le système
4/1/2019 - Paper - French -
Learn More€99.33 -
NF EN 17176-1, T54-968-1 (04/2019)
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1 : general
4/1/2019 - Paper - French -
Learn More€60.50 -
NF EN ISO 11296-7, P16-364-7 (02/2019)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7 : lining with spirally-wound pipes - Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 7 : Tubage par enroulement hélicoïdal avec espace annulaire
2/1/2019 - Paper - French -
Learn More€75.50 -
NF EN ISO 13257, T54-903 (12/2018)
Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
12/1/2018 - Paper - French -
Learn More€60.50 -
NF EN ISO 11299-3, T54-966-3 (12/2018)
Plastics piping systems for renovation of underground gas supply networks - Part 3 : lining with close-fit pipes
12/1/2018 - Paper - French -
Learn More€73.23 -
NF EN ISO 11299-1, T54-966-1 (12/2018)
Plastics piping systems for renovation of underground gas supply networks - Part 1 : general
12/1/2018 - Paper - French -
Learn More€73.23 -
NF EN ISO 15494, T54-946 (10/2018)
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Systèmes de canalisations en matières plastiques pour les applications industrielles - Polybutène (PB), polyéthylène (PE), polyéthylène de meilleure résistance à la température (PE-RT), polyéthylène réticulé (PEX), polypropylène (PP) - Séries métriques pour les spécifications pour les composants
10/1/2018 - Paper - French -
Learn More€167.00 -
NF EN ISO 11298-3, T54-967-3 (10/2018)
Plastics piping systems for renovation of underground water supply networks - Part 3 : lining with close-fit pipes
10/1/2018 - Paper - French -
Learn More€73.23 -
NF EN ISO 11297-3, P16-378-3 (10/2018)
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3 : lining with close-fit pipes
10/1/2018 - Paper - French -
Learn More€75.50 -
NF EN ISO 19893, T54-940 (09/2018)
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
9/1/2018 - Paper - French -
Learn More€58.50 -
NF EN ISO 19892, T54-942 (09/2018)
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling
9/1/2018 - Paper - French -
Learn More€33.33 -
NF EN 16436-1/IN2, D36-381-1/IN2 (09/2018)
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1 : hoses and tubings
9/1/2018 - Paper - French -
Learn More€23.00 -
NF EN ISO 15874-5/A1, T54-938-5/A1 (08/2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5 : fitness for purpose of the system - Amendment 1
8/1/2018 - Paper - French -
Learn More€34.67 -
NF EN ISO 15874-3/A1, T54-938-3/A1 (08/2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : fittings - Amendment 1
8/1/2018 - Paper - French -
Learn More€25.67 -
NF EN ISO 11296-3, P16-364-3 (08/2018)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3 : lining with close-fit pipes
8/1/2018 - Paper - French -
Learn More€73.00 -
NF EN ISO 15874-2/A1, T54-938-2/A1 (08/2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : pipes - Amendment 1
8/1/2018 - Paper - French -
Learn More€25.50 -
NF EN ISO 21225-1, T54-960-1 (05/2018)
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1 : replacement on the line by pipe bursting and pipe extraction
5/1/2018 - Paper - French -
Learn More€73.23 -
NF EN ISO 11296-1, P16-364-1 (05/2018)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1 : general
5/1/2018 - Paper - French -
Learn More€73.23 -
NF EN ISO 21225-2, T54-960-2 (05/2018)
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2 : replacement off the line by horizontal directional drilling and impact moling - Systèmes de canalisations en plastique pour la remplacement sans tranchée des réseaux enterrés - Partie 2 : Remplacement hors ligne par forage horizontal dirigé et fonçage par fusée
5/1/2018 - Paper - French -
Learn More€73.23 -
NF EN ISO 11297-1, P16-378-1 (04/2018)
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1 : general
4/1/2018 - Paper - French -
Learn More€73.23 -
NF EN 13476-1, P16-353-1 (04/2018)
Plastic piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1 : general requirements and performance characteristics - Systèmes de canalisations en plastiques pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisation à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 1 : Exigences générales et
4/1/2018 - Paper - French -
Learn More€83.85 -
NF EN ISO 11298-1, T54-967-1 (04/2018)
Plastics piping systems for renovation of underground water supply networks - Part 1 : general
4/1/2018 - Paper - French -
Learn More€73.23 -
NF EN ISO 11296-2, P16-364-2 (02/2018)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2 : Lining with continuous pipes - Systèmes de canalisation plastiques pour la rénovation des réseaux dassainissement gravitaires enterrés - Partie 2 : Réhabilition par tubage avec canalisations continues
2/1/2018 - Paper - French -
Learn More€58.62 -
NF EN ISO 11297-2, P16-378-2 (02/2018)
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2 : lining with continuous pipes - Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sous pression - Partie 2 : Réhabilition par tubage avec canalisations continues
2/1/2018 - Paper - French -
Learn More€58.62 -
NF EN ISO 11298-2, T54-967-2 (02/2018)
Plastics piping systems for renovation of underground water supply networks - Part 2 : lining with continuous pipes - Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 2 : Tubage par tuyau continu avec espace annulaire
2/1/2018 - Paper - French -
Learn More€58.62 -
NF EN ISO 11297-4, P16-378-4 (02/2018)
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4 : lining with cured-in-place pipes
2/1/2018 - Paper - French -
Learn More€73.23 -
XP T54-990 (02/2018)
Polyethylene (PE) pipes and fittings - Determination of the resistance to crack initiation and slow crack growth on notched cylindrical bars under constant load (NCBT)
2/1/2018 - Paper - French -
Learn More€75.67 -
NF EN ISO 11173, T54-910 (01/2018)
Thermoplastics pipes - Determination of resistance to external blows - Staircase method
1/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 3127, T54-097 (01/2018)
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method
1/1/2018 - Paper - French -
Learn More€56.64 -
NF EN ISO 2507-3, T54-024-3 (12/2017)
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3 : test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
12/1/2017 - Paper - French -
Learn More€33.62 -
NF EN ISO 15876-2, T54-944-2 (12/2017)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2 : Pipes - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 2 : Tubes (ISO 15876-2:2003)
12/1/2017 - Paper - French -
Learn More€70.75 -
NF EN ISO 2507-1, T54-024-1 (12/2017)
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1 : general test method
12/1/2017 - Paper - French -
Learn More€33.62 -
NF EN ISO 2507-2, T54-024-2 (12/2017)
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2 : test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes - Tubes et raccords en matières thermoplastiques - Température de ramollissement Vicat - Partie 2 : Conditions particulières d'essai pour tubes et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) ou en poly(chlorure de vinyle) chloré (PVC-C) et tubes en poly(chlorure de vinyle) à
12/1/2017 - Paper - French -
Learn More€46.55 -
NF EN ISO 15876-1, T54-944-1 (12/2017)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1 : General
12/1/2017 - Paper - French -
Learn More€73.23 -
NF EN ISO 15876-5, T54-944-5 (12/2017)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5 : Fitness for purpose of the system
12/1/2017 - Paper - French -
Learn More€58.50 -
NF EN ISO 13264, T54-939 (10/2017)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
10/1/2017 - Paper - French -
Learn More€46.55 -
NF EN ISO 13254, T54-901 (10/2017)
Thermoplastics piping systems for non-pressure applications - Test method for watertightness - Systèmes de canalisations thermoplastiques pour applications sans pression - Méthode d'essai de l'étanchéité à l'eau (ISO 13254:2010)
10/1/2017 - Paper - French -
Learn More€33.62 -
NF EN ISO 13255, T54-902 (10/2017)
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
10/1/2017 - Paper - French -
Learn More€33.62 -
NF EN ISO 13262, T54-925 (10/2017)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
10/1/2017 - Paper - French -
Learn More€33.62 -
NF EN ISO 9852, T54-006 (10/2017)
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method
10/1/2017 - Paper - French -
Learn More€46.55 -
NF EN ISO 13260/A1, P16-360/A1 (09/2017)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1
9/1/2017 - Paper - French -
Learn More€25.50 -
NF EN ISO 15493/A1, T54-947/A1 (04/2017)
Systèmes de canalisations en matières plastiques pour les applications industrielles - Acrylonitrile-butadiène-styrène (ABS), poly(chlorure de vinyle) non plastifié (PVC-U) et poly(chlorure de vinyle) chloré (PVC-C) - Spécifications pour les composants et le système - Série métrique - Amendement 1
4/1/2017 - Paper - French -
Learn More€31.00 -
XP CEN/TS 14758-2, P16-366-2 (01/2017)
Plastics piping sytems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-M) - Part 2 : guidance for the assessment of conformity
1/1/2017 - Paper - French -
Learn More€75.67 -
NF EN ISO 10931/A1, T54-976/A1 (09/2015)
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system - Amendment 1
9/1/2015 - Paper - French -
Learn More€25.67 -
NF EN ISO 6259-3, T54-955-3 (08/2015)
Thermoplastics pipes - Determination of tensile properties - Part 3 : polyolefin pipes - Tubes en matières thermoplastiques
8/1/2015 - Paper - French -
Learn More€70.75 -
NF EN ISO 6259-1, T54-955-1 (07/2015)
Thermoplastics pipes - Determination of tensile properties - Part 1 : general test method
7/1/2015 - Paper - French -
Learn More€57.00 -
NF EN 15383+A1, P16-372 (12/2013)
Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers - Systèmes de canalisations en plastique pour les branchements et collecteurs d'assainissement
12/1/2013 - Paper - French -
Learn More€86.67 -
NF EN 15383/IN1, P16-372/IN1 (12/2013)
Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers - Systèmes de canalisations en plastique pour les branchements et collecteurs d'assainissement
12/1/2013 - Paper - French -
Learn More€22.50 -
NF P16-351 (11/2013)
Plastics piping systems for underground drainage - Road works, public works and other civil engineering works - Specifications for PVC-U, PE and PP pipes and ancillaries - Systèmes de canalisations en plastique pour drainage enterré
11/1/2013 - Paper - French -
Learn More€86.67 -
XP T54-986 (07/2013)
Polyethylene pipes for the conveyance of water under pressure - Determination of circumferential tensile properties of a pipe - Tubes en polyéthylène pour le transport d'eau sous pression
7/1/2013 - Paper - French -
Learn More€86.67 -
NF EN ISO 15874-5, T54-938-5 (04/2013)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5 : fitness for purpose of the system - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
4/1/2013 - Paper - French -
Learn More€58.50 -
NF EN ISO 15874-3, T54-938-3 (04/2013)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : fittings - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
4/1/2013 - Paper - French -
Learn More€73.23 -
NF EN ISO 15874-1, T54-938-1 (04/2013)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : general - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
4/1/2013 - Paper - French -
Learn More€57.00 -
NF EN ISO 15874-2, T54-938-2 (04/2013)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : pipes - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
4/1/2013 - Paper - French -
Learn More€81.00 -
NF EN ISO 10147, T54-087 (03/2013)
Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content - Tubes et raccords en polyéthylène réticulé (PE-X)
3/1/2013 - Paper - French -
Learn More€48.00 -
XP CEN/TS 1566-2, T54-919-2 (02/2013)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride)(PVC-C) - Part 2 : guidance for assessment of conformity - Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments
2/1/2013 - Paper - French -
Learn More€75.67 -
XP CEN/TS 1401-2, P16-352-2 (02/2013)
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U) - Part 2 : guidance for assessment of conformity - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression
2/1/2013 - Paper - French -
Learn More€75.67 -
XP CEN/TS 1455-2, T54-914-2 (12/2012)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2 : guidance for the assessment of conformity - Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments
12/1/2012 - Paper - French -
Learn More€75.67 -
XP CEN/TS 12666-2, P16-356-2 (11/2012)
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2 : guidance for the assessment of conformity - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement sans pression enterrés
11/1/2012 - Paper - French -
Learn More€75.67 -
XP CEN/TS 14632, T57-232 (09/2012)
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP)based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity - Systèmes de canalisations en plastique pour les branchements, les collecteurs d'assainissement et l'alimentation en eau, avec ou sans pression
9/1/2012 - Paper - French -
Learn More€86.67 -
XP CEN/TS 1519-2, T54-917-2 (08/2012)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2 : guidance for the assessment of conformity - Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments
8/1/2012 - Paper - French -
Learn More€75.50 -
FD CEN/TR 12108, T54-933 (04/2012)
Plastics piping systems - Guidance for the installation inside building of pressure piping systems for hot and cold water intended for human consumption - Systèmes de canalisations plastiques
4/1/2012 - Paper - French -
Learn More€86.67 -
NF EN 12666-1+A1, P16-356-1 (09/2011)
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement sans pression enterrés
9/1/2011 - Paper - French -
Learn More€86.67 -
NF EN 12666-1/IN1, P16-356-1/IN1 (09/2011)
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement sans pression enterrés
9/1/2011 - Paper - French -
Learn More€23.00 -
NF EN ISO 21003-2/A1, T54-952-2/A1 (06/2011)
Multilayer piping systems for hot and cold water installations inside buildings - Part 2 : pipes - Amendment 1
6/1/2011 - Paper - French -
Learn More€25.67 -
NF EN ISO 1452-5, T54-016-5 (04/2011)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5 : fitness for purpose of the system - Systèmes de canalisations en plastique pour l'alimentation en eau, pour branchements et collecteurs d'assainissement enterrés et aériens avec pression
4/1/2011 - Paper - French -
Learn More€73.00 -
FD CEN/TR 15729, T57-233 (02/2011)
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles - Systèmes de canalisations en plastique
2/1/2011 - Paper - French -
Learn More€48.00 -
NF EN ISO 15877-1/A1, T54-014-1/A1 (01/2011)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : general - Amendment 1 - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
1/1/2011 - Paper - French -
Learn More€25.67 -
NF EN ISO 15877-5/A1, T54-014-5/A1 (01/2011)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5 : fitness for purpose of the system - Amendment 1 - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
1/1/2011 - Paper - French -
Learn More€25.50 -
NF EN ISO 15877-3/A1, T54-014-3/A1 (01/2011)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3 : fittings - Amendment 1 - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
1/1/2011 - Paper - French -
Learn More€25.67 -
NF EN ISO 15877-2/A1, T54-014-2/A1 (01/2011)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2 : pipes - Amendment 1 - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
1/1/2011 - Paper - French -
Learn More€25.50 -
NF EN 1447+A1, T57-204 (12/2010)
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure - Systèmes de canalisations en plastiques
12/1/2010 - Paper - French -
Learn More€48.00 -
NF EN ISO 1452-3, T54-016-3 (12/2010)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3 : fittings - Systèmes de canalisations en plastique pour l'alimentation en eau, pour branchements et collecteurs d'assainissement enterrés et aériens avec pression
12/1/2010 - Paper - French -
Learn More€101.00 -
NF EN 16000, T54-984 (08/2010)
Plastics piping systems - Systems within the building structure - Mounting and fixing of components in the test apparatus to thermal attack by a single burning item - Systèmes de canalisations en plastique
8/1/2010 - Paper - French -
Learn More€34.50 -
AC T54-985 (07/2010)
Plastics piping systems for water transport under pressure - Validation agreement of pipes made from biaxial oriented poly(vinyl chloride)(PVC-BO) pipes and iron fittings or clamps - Systèmes de canalisations en plastique pour le transport de l'eau sous pression
7/1/2010 - Paper - French -
Learn More€60.67 -
NF EN ISO 1452-4, T54-016-4 (01/2010)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4 : valves - Systèmes de canalisations en plastique pour l'alimentation en eau, pour branchements et collecteurs d'assainissement enterrés et aériens avec pression
1/1/2010 - Paper - French -
Learn More€58.62 -
NF EN ISO 22391-5, T54-982-5 (01/2010)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5 : fitness for purpose of the system - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
1/1/2010 - Paper - French -
Learn More€58.62 -
NF EN ISO 15877-3, T54-014-3 (05/2009)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3 : fittings - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
5/1/2009 - Paper - French -
Learn More€81.02 -
NF EN ISO 15877-5, T54-014-5 (05/2009)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5 : fitness for purpose of the system - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
5/1/2009 - Paper - French -
Learn More€58.50 -
NF EN ISO 1167-3, T54-025-3 (01/2008)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3 : preparation of components - Tubes, raccords et assemblages en matières thermoplastiques pour le transport des fluides
1/1/2008 - Paper - French -
Learn More€60.50 -
NF EN ISO 1167-4, T54-025-4 (01/2008)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4 : preparation of assemblies - Tubes, raccords et assemblages en matières thermoplastiques pour le transport des fluides
1/1/2008 - Paper - French -
Learn More€48.00 -
NF DTU 60.32 P1-2, P41-212-1-2 (11/2007) (R2012)
Building works - Unplasticized polyvinyl chloride piping installation - Rainwater downpipes - Part 1-2 : general criteria for selection of materials
11/1/2007 - Paper - French -
Learn More€33.33 -
NF DTU 60.32 P1-1, P41-212-1-1 (11/2007) (R2012)
Building works - Unplasticized polyvinyl chloride piping installation - Rainwater downpipies - Part 1-1 : technical specifications
11/1/2007 - Paper - French -
Learn More€33.33 -
NF EN ISO 15875-1/A1, T54-943-1/A1 (10/2007)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1 : general - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
10/1/2007 - Paper - French -
Learn More€25.67 -
NF DTU 60.33, P41-213-1 (10/2007) (R2012)
Building works - Unplasticized polyvinyl chloride piping installation - Waste water drainage - Part 1-1 : technical specifications - Part 1-2 : general criteria for selection of materials - Travaux de bâtiment
10/1/2007 - Paper - French -
Learn More€40.50 -
NF EN ISO 13478, T54-908 (10/2007)
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) - Tubes en matières thermoplastiques pour le transport des fluides
10/1/2007 - Paper - French -
Learn More€75.67 -
NF DTU 60.33 P1-2, P41-213-1-2 (10/2007)
Travaux de bâtiment - Canalisations en polychlorure de vinyle non plastifié - Évacuation d'eaux usées et d'eaux vannes - Partie 1-2 : critères généraux de choix des matériaux
10/1/2007 - Paper - French -
Learn More€33.33 -
NF DTU 60.33 P1-1, P41-213-1-1 (10/2007)
Travaux de bâtiment - Canalisations en polychlorure de vinyle non plastifié - Évacuation d'eaux usées et d'eaux vannes - Partie 1-1 : cahier des clauses techniques
10/1/2007 - Paper - French -
Learn More€33.33 -
NF EN ISO 15875-2/A1, T54-943-2/A1 (09/2007)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2 : pipes - Systèmes de canalisations en plastiques pour les installations d'eau chaude et froide
9/1/2007 - Paper - French -
Learn More€25.67 -
NF DTU 60.31 P1-2, P41-211-1-2 (05/2007) (R2012)
Building works - Unplasticized polyvinyl chloride piping installation : cold water under pressure - Part 1-2 : general criteria for selection of materials
5/1/2007 - Paper - French -
Learn More€33.33 -
NF EN ISO 1167-1, T54-025-1 (05/2006)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of resistance to internal pressure - Part 1 : general method - Tubes, raccords et assemblages en matières thermoplastiques pour le transport des fluides
5/1/2006 - Paper - French -
Learn More€60.67 -
NF EN ISO 1167-2, T54-025-2 (05/2006)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2 : preparation of pipe test pieces - Tubes, raccords et assemblages en matières thermoplastiques pour le transport des fluides
5/1/2006 - Paper - French -
Learn More€34.50 -
NF T54-034 (10/2005) (R2010)
Plastics piping systems made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and/or biaxial oriented poly(vinyl chloride) (PVC-BO) for conveyance under pressure of non gaseous fluids - Design rules, selection of components - Réseaux de canalisations en poly(chlorure de vinyle) non plastifié (PVC-U), poly(chlorure de vinyle) chloré (PVC-C) et/ou poly(chlorure de vinyle) orienté biaxial (PVC-BO) pour le transport sous pression de fluides non gazeux
10/1/2005 - Paper - French -
Learn More€144.67 -
NF EN ISO 15875-3, T54-943-3 (05/2004)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3 : fittings - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
5/1/2004 - Paper - French -
Learn More€81.02 -
NF EN ISO 15875-5, T54-943-5 (05/2004)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5 : fitness for purpose of the system - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
5/1/2004 - Paper - French -
Learn More€73.00 -
NF T54-970 (03/2004)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Electrofusion tapping tees - Design of tapping tees and leak flow rate for the cutter - Systèmes de canalisations en plastique pour la distribution de combustibles gazeux
3/1/2004 - Paper - French -
Learn More€75.67 -
NF EN 12100, T54-930 (11/1997)
Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports. - Systèmes de canalisations en plastiques
11/1/1997 - Paper - French -
Learn More€60.67 -
NF EN 1716, T54-922 (04/1997)
Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee. - Systèmes de canalisations en plastiques
4/1/1997 - Paper - French -
Learn More€60.50 -
NF T54-020 (04/1995) (R2010)
Plastics. Pipes made of light weight unplasticized polyvinyl chloride. Cold flaring test. - Plastiques
4/1/1995 - Paper - French -
Learn More€60.67 -
NF EN 705, T57-211 (09/1994) (R1999)
Plastics piping sytems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Methods for regression analysis and their use. - Systèmes de canalisations plastiques
9/1/1994 - Paper - French -
Learn More€119.00 -
NF T54-086 (09/1990) (R2010)
Plastics. Unplasticized poly(vinylchloride) (PVC-U) for underground irrigation. Specifications. - Plastiques
9/1/1990 - Paper - French -
Learn More€86.67