23.040.20 : Plastics pipes
-
UNE-EN ISO 10468:2024
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)
4/10/2024 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 10468:2024
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)
4/10/2024 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
3/20/2024 - PDF - Spanish - AENOR
Learn More€88.00 -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
3/20/2024 - PDF - English - AENOR
Learn More€105.60 -
UNE-EN 17176-2:2019+A1:2023
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
12/20/2023 - PDF - Spanish - AENOR
Learn More€76.00 -
UNE-EN 17176-2:2019+A1:2023
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
12/20/2023 - PDF - English - AENOR
Learn More€91.20 -
UNE-EN ISO 11296-9:2023
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
12/20/2023 - PDF - Spanish - AENOR
Learn More€85.00 -
UNE-EN ISO 11296-9:2023
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
12/20/2023 - PDF - English - AENOR
Learn More€102.00 -
UNE-EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
10/31/2023 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
10/31/2023 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
10/31/2023 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 1852-1:2018+A1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
2/15/2023 - PDF - Spanish - AENOR
Learn More€83.00 -
UNE-EN 1852-1:2018+A1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
2/15/2023 - PDF - English - AENOR
Learn More€99.60 -
UNE-EN ISO 13479:2023
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
2/15/2023 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 13479:2023
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
2/15/2023 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
1/18/2023 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
1/18/2023 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
1/18/2023 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
1/18/2023 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
11/16/2022 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
11/16/2022 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 13844:2022
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
11/16/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 13844:2022
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
11/16/2022 - PDF - English - AENOR
Learn More€69.60 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - English - AENOR
Learn More€88.80 -
UNE-CEN/TS 14541-2:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 2: Recommendations for relevant characteristics (Endorsed by Asociación Española de Normalización in July of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€65.00 -
UNE-CEN ISO/TS 23818-2:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-CEN ISO/TS 23818-3:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material (ISO/TS 23818-3:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€68.00 -
UNE-CEN ISO/TS 23818-1:2020
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 1: Polyethylene (PE) material (ISO/TS 23818-1:2020) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€95.00 -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€69.60 -
UNE 53929:2022
Plastics. Rehabilitation of supply and sewerage pipes with continuous cured tubes in situ (CIPP). Design, calculation and installation
7/20/2022 - PDF - Spanish - AENOR
Learn More€93.00 -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
5/25/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
5/25/2022 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
5/25/2022 - PDF - Spanish - AENOR
Learn More€96.00 -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
5/25/2022 - PDF - English - AENOR
Learn More€115.20 -
UNE-EN 1555-2:2022
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
5/11/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 1555-2:2022
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
5/11/2022 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN 1329-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
4/13/2022 - PDF - Spanish - AENOR
Learn More€90.00 -
UNE-EN 1329-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
4/13/2022 - PDF - English - AENOR
Learn More€108.00 -
UNE-EN ISO 23856:2022
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
3/23/2022 - PDF - Spanish - AENOR
Learn More€124.00 -
UNE-EN ISO 23856:2022
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
3/23/2022 - PDF - English - AENOR
Learn More€148.80 -
UNE-EN 13598-1:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers
3/9/2022 - PDF - Spanish - AENOR
Learn More€77.00 -
UNE-EN 13598-1:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers
3/9/2022 - PDF - English - AENOR
Learn More€92.40 -
UNE-EN 13598-2:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
3/9/2022 - PDF - Spanish - AENOR
Learn More€76.00 -
UNE-EN 13598-2:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
3/9/2022 - PDF - English - AENOR
Learn More€91.20 -
UNE-EN ISO 13259:2022
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
3/9/2022 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 13259:2022
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
3/9/2022 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN 1519-1:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
11/10/2021 - PDF - Spanish - AENOR
Learn More€83.00 -
UNE-EN 1519-1:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
11/10/2021 - PDF - English - AENOR
Learn More€99.60 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 11299-2:2021
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
10/27/2021 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 11299-2:2021
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
10/27/2021 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 11299-1:2021
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
10/27/2021 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 11299-1:2021
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
10/27/2021 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 11299-3:2021
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
10/27/2021 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN ISO 11299-3:2021
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
10/27/2021 - PDF - English - AENOR
Learn More€85.20 -
UNE-EN ISO 15875-2:2004/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 15875-2:2004/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
9/29/2021 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN ISO 15875-5:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 15875-5:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15876-5:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15876-5:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15875-3:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15875-3:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15876-2:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15876-2:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15877-2:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15877-2:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15877-5:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15877-5:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
9/29/2021 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN ISO 22391-2:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 22391-2:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More€46.80 -
UNE-CEN/TS 1046:2021
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation (Endorsed by Asociación Española de Normalización in September of 2021.)
9/1/2021 - PDF - English - AENOR
Learn More€72.00 -
UNE 53331:2021
Plastics. Unplasticized poly(vinyl chloride), oriented unplasticized poly(vinyl chloride) (PVC-O), polyethylene (PE) and polypropylene (PP) pipes. Criterion for the assessment of pipes for plastics piping systems with car without pressure under external loads.
7/14/2021 - PDF - Spanish - AENOR
Learn More€102.00 -
UNE-CEN/TS 12007-6:2021
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 6: Specific functional recommendations for unplasticized polyamide (PA-U) (Endorsed by Asociación Española de Normalización in May of 2021.)
5/1/2021 - PDF - English - AENOR
Learn More€70.00 -
UNE-EN ISO 6259-2:2021
Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) (ISO 6259-2:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 6259-2:2021
Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) (ISO 6259-2:2020)
3/31/2021 - PDF - English - AENOR
Learn More€81.60 -
UNE-CEN/TS 1329-2:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in March of 2021.)
3/1/2021 - PDF - English - AENOR
Learn More€69.00 -
UNE 53994:2020
Plastics. PVC-U, PE and PP pipes and fittings for drainage in building and civil engineering and agricultural drainage.
11/11/2020 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-CEN/TS 1519-2:2020
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€66.00 -
UNE-CEN/TS 17176-7:2020
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€71.00 -
UNE-EN 12201-2:2012+A1:2020
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
2/12/2020 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 12201-2:2012+A1:2020
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
2/12/2020 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 13257:2020
Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
1/8/2020 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 13257:2020
Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
1/8/2020 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 17176-1:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
12/26/2019 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 17176-1:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
12/26/2019 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 17176-5:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
12/26/2019 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 17176-5:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
12/26/2019 - PDF - English - AENOR
Learn More€72.00 -
UNE-CEN ISO/TS 21003-7:2019
Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity (ISO/TS 21003-7:2019) (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€78.00 -
UNE-EN ISO 11297-3:2019
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
9/25/2019 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN ISO 11297-3:2019
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
9/25/2019 - PDF - English - AENOR
Learn More€85.20 -
UNE-EN ISO 11298-3:2019
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
9/25/2019 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN ISO 11298-3:2019
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
9/25/2019 - PDF - English - AENOR
Learn More€85.20 -
UNE-EN ISO 11296-3:2019
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
9/11/2019 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 11296-3:2019
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
9/11/2019 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 19892:2019
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
4/30/2019 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 19892:2019
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
4/30/2019 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN ISO 19893:2019
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
4/30/2019 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 19893:2019
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
4/30/2019 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 13056:2019
Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
4/3/2019 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 13056:2019
Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
4/3/2019 - PDF - English - AENOR
Learn More€55.20 -
UNE-CEN ISO/TS 15874-7:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
3/1/2019 - PDF - English - AENOR
Learn More€70.00 -
UNE-CEN ISO/TS 15875-7:2018
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
3/1/2019 - PDF - English - AENOR
Learn More€71.00 -
UNE-CEN ISO/TS 15876-7:2018
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
3/1/2019 - PDF - English - AENOR
Learn More€70.00 -
UNE-CEN ISO/TS 15877-7:2018
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
3/1/2019 - PDF - English - AENOR
Learn More€70.00 -
UNE-EN ISO 15874-2:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
12/26/2018 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 15874-2:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
12/26/2018 - PDF - English - AENOR
Learn More€46.80 -
UNE-EN ISO 15874-3:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
12/26/2018 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 15874-3:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
12/26/2018 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15874-5:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
12/26/2018 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15874-5:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
12/26/2018 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
12/26/2018 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
12/26/2018 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
12/26/2018 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
12/26/2018 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
11/7/2018 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
11/7/2018 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
11/7/2018 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
11/7/2018 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
11/7/2018 - PDF - Spanish - AENOR
Learn More€98.00 -
UNE-EN ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
11/7/2018 - PDF - English - AENOR
Learn More€117.60 -
UNE-EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
9/19/2018 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
9/19/2018 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
9/19/2018 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
9/19/2018 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
9/5/2018 - PDF - Spanish - AENOR
Learn More€69.00 -
UNE-EN ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
9/5/2018 - PDF - English - AENOR
Learn More€82.80 -
UNE 53394:2018 IN
Plastics. Code for the installation and handling of polyethylene (PE) pipes for water piping under pressure. Recommended techniques
7/25/2018 - PDF - Spanish - AENOR
Learn More€85.00 -
UNE-EN ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
7/25/2018 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
7/25/2018 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
7/25/2018 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
7/25/2018 - PDF - English - AENOR
Learn More€81.60 -
UNE 53367-1:2014/1M:2018
Plastics. Plastics piping systems for water supply for irrigation. Part 1: Specifications for polyethylene pipes
5/30/2018 - PDF - Spanish - AENOR
Learn More€17.00 -
UNE-EN ISO 3127:2018
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
5/23/2018 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 3127:2018
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
5/23/2018 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 11173:2018
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
5/23/2018 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 11173:2018
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
5/23/2018 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 9852:2018
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
5/9/2018 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 9852:2018
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
5/9/2018 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 13254:2018
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
5/3/2018 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 13254:2018
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
5/3/2018 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN ISO 13255:2018
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
5/3/2018 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 13255:2018
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
5/3/2018 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN ISO 10619-1:2018
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
4/25/2018 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 10619-1:2018
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
4/25/2018 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 13262:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
4/25/2018 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 13262:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
4/25/2018 - PDF - English - AENOR
Learn More€58.80 -
UNE-EN ISO 13263:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
4/25/2018 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 13263:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
4/25/2018 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN ISO 13264:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
4/25/2018 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 13264:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
4/25/2018 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN ISO 2507-1:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
4/18/2018 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 2507-1:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
4/18/2018 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN ISO 2507-2:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
4/18/2018 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 2507-2:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
4/18/2018 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 2507-3:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
4/18/2018 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-EN ISO 2507-3:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
4/18/2018 - PDF - English - AENOR
Learn More€58.80 -
UNE-CEN/TR 17179:2018
Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for underground installation (Endorsed by Asociación Española de Normalización in April of 2018.)
4/1/2018 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN ISO 13260:2012/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
12/5/2017 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 13260:2012/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
12/5/2017 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15876-1:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017)
7/12/2017 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 15876-1:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017)
7/12/2017 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 15876-2:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017)
7/12/2017 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 15876-2:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017)
7/12/2017 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 15876-3:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017)
7/12/2017 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 15876-3:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017)
7/12/2017 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 15876-5:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
7/12/2017 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 15876-5:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
7/12/2017 - PDF - English - AENOR
Learn More€72.00 -
UNE 53943:2017
Plastic networks to centralize water meters. Polyethylene (PE), polypropylene (PP) and polybutylene (PB) networks with butt welded joints
5/3/2017 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 12200-1:2017
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
1/25/2017 - PDF - Spanish - AENOR
Learn More€77.00 -
UNE-EN 12200-1:2017
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
1/25/2017 - PDF - English - AENOR
Learn More€92.40 -
UNE 53008-2:2016
Plastics piping systems. Multilayer pipe systems for gas installations pipework with a maximum operating pressure up to and including 5 bar (500 kPa). Part 2: Design, installation and maintenance
9/21/2016 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 9967:2016
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
4/20/2016 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 9967:2016
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
4/20/2016 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 9969:2016
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
4/20/2016 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 9969:2016
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
4/20/2016 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 6259-3:2015
Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015)
12/2/2015 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 6259-3:2015
Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015)
12/2/2015 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 17778:2015
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)
10/28/2015 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 17778:2015
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships (ISO 17778:2015)
10/28/2015 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 6259-1:2015
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
10/21/2015 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 6259-1:2015
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
10/21/2015 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 13845:2015
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
7/29/2015 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 13845:2015
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
7/29/2015 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN 16506:2015 (R2020)
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
5/27/2015 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 16506:2015 (R2020)
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
5/27/2015 - PDF - English - AENOR
Learn More€88.80
