23.040.20 : Plastics pipes
-
PD ISO/TR 18124:2006
Plastics piping systems. Multilayer M (metal) pipes. Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
5/31/2009 - PDF - English - BSI
Learn More€180.00 -
NBN EN ISO 15877-5:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2009)
5/20/2009 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 15877-5:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2009)
5/20/2009 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 15877-5:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2009)
5/20/2009 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 15877-1:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009)
5/20/2009 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 15877-1:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009)
5/20/2009 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 15877-1:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009)
5/20/2009 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 15877-2:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2009)
5/20/2009 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 15877-2:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2009)
5/20/2009 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 15877-2:2009
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2009)
5/20/2009 - PDF - English - NBN
Learn More€89.00 -
NF EN ISO 15877-3, T54-014-3 (05/2009)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3 : fittings - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
5/1/2009 - Paper - French - AFNOR
Learn More€81.02 -
NF EN ISO 15877-5, T54-014-5 (05/2009)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5 : fitness for purpose of the system - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
5/1/2009 - Paper - French - AFNOR
Learn More€58.50 -
BS EN 1119:2009
Plastics piping systems. Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
4/30/2009 - PDF - English - BSI
Learn More€151.00 -
€32.50
-
JIS K 6787/AMENDMENT 1:2009
Crosslinked polyethylene (PE-X) pipes for water supply (Amendment 1)
3/20/2009 - PDF - Japanese - JSA
Learn More€32.50 -
€32.50
-
BS ISO 24033:2009
Polyethylene of raised temperature resistance (PE-RT) pipes. Effect of time and temperature on the expected strength
2/28/2009 - PDF - English - BSI
Learn More€180.00 -
UNE-EN ISO 21003-2:2009 ERRATUM:2009
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)
2/4/2009 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN ISO 13968:2009
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008)
1/14/2009 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 13968:2009
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008)
1/14/2009 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN ISO 21003-2:2009
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)
1/14/2009 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 21003-2:2009
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)
1/14/2009 - PDF - English - AENOR
Learn More€84.00 -
ISO 24033:2009
Polyethylene of raised temperature resistance (PE-RT) pipes
Effect of time and temperature on the expected strength
1/7/2009 - Paper - English - ISO
Learn More€72.00 -
ISO 17484-2:2009 (R2019)
Plastics piping systems
Multilayer pipe systems for indoor gas installations
1/5/2009 - Paper - English - ISO
Learn More€72.00 -
DIN EN ISO 13968:2009-01
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008), German version EN ISO 13968:2008
1/1/2009 - PDF - German - DIN
Learn More€45.98 -
DIN EN ISO 13968:2009-01
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008)
1/1/2009 - PDF - English - DIN
Learn More€57.57 -
JIS K 6816:2008 (R2013)
Thermoplastics pipes and fittings - Test method for Vicat softening temperature
12/20/2008 - PDF - Japanese - JSA
Learn More€25.00 -
€25.00
-
NBN EN ISO 13968:2008
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008)
12/17/2008 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 13968:2008
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008)
12/17/2008 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 13968:2008
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008)
12/17/2008 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 21003-2:2008
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)
11/26/2008 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 21003-2:2008
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)
11/26/2008 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 21003-2:2008
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)
11/26/2008 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 13477:2008
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008)
11/26/2008 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 13477:2008
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008)
11/26/2008 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 13477:2008
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008)
11/26/2008 - PDF - English - NBN
Learn More€89.00 -
€32.50
-
UNE-EN ISO 13477:2008
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008)
10/29/2008 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 13477:2008
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008)
10/29/2008 - PDF - English - AENOR
Learn More€81.60 -
€48.00
-
ISO 13968:2008 (R2023)
Plastics piping and ducting systems
Thermoplastics pipes
10/2/2008 - Paper - English - ISO
Learn More€48.00 -
BS EN ISO 13477:2008
Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Small-scale steady-state test (S4 test)
9/30/2008 - PDF - English - BSI
Learn More€180.00 -
DIN 8077:2008-09
Polypropylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT - Dimensions
9/1/2008 - PDF - German - DIN
Learn More€99.35 -
DIN 8077:2008-09
Polypropylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT - Dimensions
9/1/2008 - PDF - English - DIN
Learn More€124.21 -
DIN 8078:2008-09
Polypropylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing
9/1/2008 - PDF - German - DIN
Learn More€72.80 -
DIN 8078:2008-09
Polypropylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing
9/1/2008 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 13477:2008-06
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008); German version EN ISO 13477:2008
6/1/2008 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 13477:2008-06
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008); German version EN ISO 13477:2008
6/1/2008 - PDF - English - DIN
Learn More€91.12 -
BS EN ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination resistance to internal pressure Preparation pipe test pieces
5/30/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination resistance to internal pressure General method
5/30/2008 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 1167-4:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination resistance to internal pressure Preparation
4/30/2008 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 1167-3:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination resistance to internal pressure Preparation components
4/30/2008 - PDF - English - BSI
Learn More€180.00 -
BS ISO 13950:2007
Plastics pipes and fittings. Automatic recognition systems for electrofusion joints
4/30/2008 - PDF - English - BSI
Learn More€348.00 -
BS ISO 18373-2:2008
Rigid PVC pipes. Differential scanning calorimetry (DSC) method Measurement of the enthalpy fusion crystallites
3/31/2008 - PDF - English - BSI
Learn More€180.00 -
ISO 13477:2008 (R2023)
Thermoplastics pipes for the conveyance of fluids
Determination of resistance to rapid crack propagation (RCP)
3/20/2008 - Paper - French - ISO
Learn More€110.00 -
ISO 13477:2008 (R2023)
Thermoplastics pipes for the conveyance of fluids
Determination of resistance to rapid crack propagation (RCP)
3/20/2008 - Paper - English - ISO
Learn More€110.00 -
UNE-EN ISO 1167-3:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
3/5/2008 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 1167-3:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
3/5/2008 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 1167-4:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007)
3/5/2008 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 1167-4:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007)
3/5/2008 - PDF - English - AENOR
Learn More€63.60 -
BS EN ISO 13478:2007
Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test (FST)
2/29/2008 - PDF - English - BSI
Learn More€250.00 -
ISO 18373-2:2008 (R2021)
Rigid PVC pipes
Differential scanning calorimetry (DSC) method
2/5/2008 - Paper - English - ISO
Learn More€72.00 -
DIN EN ISO 1167-3:2008-02
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007); German version EN ISO 1167-3:2007
2/1/2008 - PDF - German - DIN
Learn More€59.63 -
DIN EN ISO 1167-3:2008-02
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007); German version EN ISO 1167-3:2007
2/1/2008 - PDF - English - DIN
Learn More€74.58 -
DIN EN ISO 1167-4:2008-02
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007); German version EN ISO 1167-4:2007
2/1/2008 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 1167-4:2008-02
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007); German version EN ISO 1167-4:2007
2/1/2008 - PDF - English - DIN
Learn More€66.07 -
NBN EN ISO 1167-3:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
1/29/2008 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 1167-3:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
1/29/2008 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 1167-3:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
1/29/2008 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 1167-4:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007)
1/29/2008 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 1167-4:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007)
1/29/2008 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 1167-4:2008
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007)
1/29/2008 - PDF - English - NBN
Learn More€37.00 -
UNE-EN ISO 13478:2008
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007)
1/16/2008 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 13478:2008
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007)
1/16/2008 - PDF - English - AENOR
Learn More€81.60 -
NF EN ISO 1167-4, T54-025-4 (01/2008)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4 : preparation of assemblies - Tubes, raccords et assemblages en matières thermoplastiques pour le transport des fluides
1/1/2008 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 1167-3, T54-025-3 (01/2008)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3 : preparation of components - Tubes, raccords et assemblages en matières thermoplastiques pour le transport des fluides
1/1/2008 - Paper - French - AFNOR
Learn More€60.50 -
ASTM F1498-08(2020)
Standard Specification for Taper Pipe Threads 60°, for Thermoplastic Pipe and Fittings
1/1/2008 - PDF - English - ASTM
Learn More€57.00 -
ASTM F1498-08(2020) + Redline
Standard Specification for Taper Pipe Threads 60°, for Thermoplastic Pipe and Fittings
1/1/2008 - PDF - English - ASTM
Learn More€68.00 -
UNE-ISO 17454:2007 (R2020)
Plastics piping systems. Multilayer pipes. Test method for the adhesion of the different layers using a pulling rig. (ISO 17454:2006)
12/19/2007 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15875-2:2004/A1:2007
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 1 (ISO 15875-2:2003/Amd 1:2007)
11/14/2007 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN ISO 15875-2:2004/A1:2007
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 1 (ISO 15875-2:2003/Amd 1:2007)
11/14/2007 - PDF - English - AENOR
Learn More€32.40 -
UNE-EN ISO 15875-1:2004/A1:2007
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1 (ISO 15875-1:2003/Amd 1:2007)
11/14/2007 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN ISO 15875-1:2004/A1:2007
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1 (ISO 15875-1:2003/Amd 1:2007)
11/14/2007 - PDF - English - AENOR
Learn More€32.40 -
DIN EN ISO 13478:2007-11
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007); German version EN ISO 13478:2007
11/1/2007 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 13478:2007-11
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007); German version EN ISO 13478:2007
11/1/2007 - PDF - English - DIN
Learn More€91.12 -
NF DTU 60.32 P1-1, P41-212-1-1 (11/2007) (R2012)
Building works - Unplasticized polyvinyl chloride piping installation - Rainwater downpipies - Part 1-1 : technical specifications
11/1/2007 - Paper - French - AFNOR
Learn More€33.33 -
NF DTU 60.32 P1-2, P41-212-1-2 (11/2007) (R2012)
Building works - Unplasticized polyvinyl chloride piping installation - Rainwater downpipes - Part 1-2 : general criteria for selection of materials
11/1/2007 - Paper - French - AFNOR
Learn More€33.33 -
€43.76
-
BS ISO 18553:2002
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
10/31/2007 - PDF - English - BSI
Learn More€180.00 -
NBN EN ISO 13478:2007
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007)
10/25/2007 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 13478:2007
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007)
10/25/2007 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 13478:2007
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007)
10/25/2007 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 15875-2/A1:2007
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène réticulé (PE-X) - Partie 2: Tubes - Amendement 1 (ISO 15875-2:2003/Amd 1:2007)
10/4/2007 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15875-2/A1:2007
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Vernetztes Polyethylen (PE-X) - Teil 2: Rohre - Änderung 1 (ISO 15875-2:2003/Amd 1:2007)
10/4/2007 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15875-2/A1:2007
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 1 (ISO 15875-2:2003/Amd 1:2007)
10/4/2007 - PDF - English - NBN
Learn More€20.00 -
NF EN ISO 13478, T54-908 (10/2007)
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) - Tubes en matières thermoplastiques pour le transport des fluides
10/1/2007 - Paper - French - AFNOR
Learn More€75.67 -
NF DTU 60.33 P1-1, P41-213-1-1 (10/2007)
Travaux de bâtiment - Canalisations en polychlorure de vinyle non plastifié - Évacuation d'eaux usées et d'eaux vannes - Partie 1-1 : cahier des clauses techniques
10/1/2007 - Paper - French - AFNOR
Learn More€33.33 -
NF DTU 60.33 P1-2, P41-213-1-2 (10/2007)
Travaux de bâtiment - Canalisations en polychlorure de vinyle non plastifié - Évacuation d'eaux usées et d'eaux vannes - Partie 1-2 : critères généraux de choix des matériaux
10/1/2007 - Paper - French - AFNOR
Learn More€33.33 -
NF DTU 60.33, P41-213-1 (10/2007) (R2012)
Building works - Unplasticized polyvinyl chloride piping installation - Waste water drainage - Part 1-1 : technical specifications - Part 1-2 : general criteria for selection of materials - Travaux de bâtiment
10/1/2007 - Paper - French - AFNOR
Learn More€40.50 -
NF EN ISO 15875-1/A1, T54-943-1/A1 (10/2007)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1 : general - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
10/1/2007 - Paper - French - AFNOR
Learn More€25.67 -
BS ISO 18373-1:2007
Rigid PVC pipes. Differential scanning calorimetry (DSC) method Measurement of the processing temperature
9/28/2007 - PDF - English - BSI
Learn More€180.00 -
NF EN ISO 15875-2/A1, T54-943-2/A1 (09/2007)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2 : pipes - Systèmes de canalisations en plastiques pour les installations d'eau chaude et froide
9/1/2007 - Paper - French - AFNOR
Learn More€25.67 -
ISO 13478:2007 (R2021)
Thermoplastics pipes for the conveyance of fluids
Determination of resistance to rapid crack propagation (RCP)
8/8/2007 - Paper - English - ISO
Learn More€110.00 -
ISO 13478:2007 (R2021)
Thermoplastics pipes for the conveyance of fluids
Determination of resistance to rapid crack propagation (RCP)
8/8/2007 - Paper - French - ISO
Learn More€110.00 -
ISO 18373-1:2007 (R2021)
Rigid PVC pipes
Differential scanning calorimetry (DSC) method
7/3/2007 - Paper - English - ISO
Learn More€72.00 -
UNE-EN ISO 3126:2005 ERRATUM:2007 (R2008)
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
5/23/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
ISO 9852:2007 (R2023)
Unplasticized poly(vinyl chloride) (PVC-U) pipes
Dichloromethane resistance at specified temperature (DCMT)
5/4/2007 - Paper - French - ISO
Learn More€48.00 -
ISO 9852:2007 (R2023)
Unplasticized poly(vinyl chloride) (PVC-U) pipes
Dichloromethane resistance at specified temperature (DCMT)
5/4/2007 - Paper - English - ISO
Learn More€48.00 -
NF DTU 60.31 P1-2, P41-211-1-2 (05/2007) (R2012)
Building works - Unplasticized polyvinyl chloride piping installation : cold water under pressure - Part 1-2 : general criteria for selection of materials
5/1/2007 - Paper - French - AFNOR
Learn More€33.33 -
€67.95
-
PD CEN/TR 15438:2007
Plastics piping systems. Guidance for coding of products and their intended uses
2/28/2007 - PDF - English - BSI
Learn More€151.00 -
€0.00
-
ISO 15875-5:2003/Cor 1:2007
Plastics piping systems for hot and cold water installations
Crosslinked polyethylene (PE-X)
1/18/2007 - Paper - French - ISO
Learn More€0.00 -
CEN/TR 15438:2007
Plastics piping systems - Guidance for coding of products and their intended uses
1/1/2007 - PDF - French - NBN
Learn More€58.00 -
CEN/TR 15438:2007
Plastics piping systems - Guidance for coding of products and their intended uses
1/1/2007 - PDF - German - NBN
Learn More€58.00 -
CEN/TR 15438:2007
Plastics piping systems - Guidance for coding of products and their intended uses
1/1/2007 - PDF - English - NBN
Learn More€58.00 -
ASTM F2658-07(2019)
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
1/1/2007 - PDF - English - ASTM
Learn More€51.00 -
ASTM F2658-07(2019) + Redline
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
1/1/2007 - PDF - English - ASTM
Learn More€61.00 -
BS 5391-1:2006
Acrylonitrile-butadiene-styrene (ABS) pressure pipe Specification
12/29/2006 - PDF - English - BSI
Learn More€250.00 -
€48.00
-
UNE-EN ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
10/11/2006 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
10/11/2006 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 1167-2:2006 (R2009)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
10/11/2006 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 1167-2:2006 (R2009)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
10/11/2006 - PDF - English - AENOR
Learn More€62.40 -
€72.00
-
€72.00
-
ISO/TS 18226:2006 (R2020)
Plastics pipes and fittings
Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
9/18/2006 - Paper - English - ISO
Learn More€199.00 -
BS EN ISO 3126:2005
Plastics piping systems. Plastics components. Determination of dimensions
7/31/2006 - PDF - English - BSI
Learn More€250.00 -
BS ISO 14531-4:2006
Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications System design installation guidelines
6/30/2006 - PDF - English - BSI
Learn More€250.00 -
BS ISO 14531-2:2004
Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Fittings heat-fusion jointing
6/30/2006 - PDF - English - BSI
Learn More€293.00 -
DIN EN ISO 1167-2:2006-05
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006); German version EN ISO 1167-2:2006
5/1/2006 - PDF - German - DIN
Learn More€45.98 -
DIN EN ISO 1167-2:2006-05
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006); German version EN ISO 1167-2:2006
5/1/2006 - PDF - English - DIN
Learn More€57.57 -
DIN EN ISO 1167-1:2006-05
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006); German version EN ISO 1167-1:2006
5/1/2006 - PDF - German - DIN
Learn More€59.63 -
DIN EN ISO 1167-1:2006-05
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006); German version EN ISO 1167-1:2006
5/1/2006 - PDF - English - DIN
Learn More€74.58 -
NF EN ISO 1167-1, T54-025-1 (05/2006)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of resistance to internal pressure - Part 1 : general method - Tubes, raccords et assemblages en matières thermoplastiques pour le transport des fluides
5/1/2006 - Paper - French - AFNOR
Learn More€60.67 -
NF EN ISO 1167-2, T54-025-2 (05/2006)
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2 : preparation of pipe test pieces - Tubes, raccords et assemblages en matières thermoplastiques pour le transport des fluides
5/1/2006 - Paper - French - AFNOR
Learn More€34.50 -
NBN EN ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
3/31/2006 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
3/31/2006 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
3/31/2006 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
3/31/2006 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
3/31/2006 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
3/31/2006 - PDF - English - NBN
Learn More€58.00 -
€25.00
-
UNE-EN ISO 7686:2006
Plastics pipes and fittings - Determination of opacity (ISO 7686:2005)
3/8/2006 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 7686:2006
Plastics pipes and fittings - Determination of opacity (ISO 7686:2005)
3/8/2006 - PDF - English - AENOR
Learn More€55.20 -
€48.00
-
€48.00
-
€151.00
-
BS EN 14802:2005
Plastics piping systems. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
1/16/2006 - PDF - English - BSI
Learn More€151.00 -
UNE-EN ISO 2505:2006 (R2008)
Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
1/4/2006 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 2505:2006 (R2008)
Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
1/4/2006 - PDF - English - AENOR
Learn More€62.40 -
DIN EN 10298:2005-12
Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; German version EN 10298:2005
12/1/2005 - PDF - German - DIN
Learn More€85.79 -
DIN EN 10298:2005-12
Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; German version EN 10298:2005
12/1/2005 - PDF - English - DIN
Learn More€107.48 -
UNE-EN ISO 580:2005 (R2008)
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
11/30/2005 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 580:2005 (R2008)
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
11/30/2005 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 3126:2005 (R2008)
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
11/30/2005 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 3126:2005 (R2008)
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
11/30/2005 - PDF - English - AENOR
Learn More€84.00 -
DVGW GW 335-A2:2005-11
Kunststoff-Rohrleitungssysteme in der Gas- und Wasserverteilung - Anforderungen und Prüfungen - Teil A2: Rohre aus PE 80 und PE 100
11/1/2005 - PDF - German - DVGW
Learn More€67.95 -
€72.00
-
DIN EN ISO 7686:2005-10
Plastics pipes and fittings - Determination of opacity (ISO 7686:2005); German version EN ISO 7686:2005
10/1/2005 - PDF - German - DIN
Learn More€45.98 -
DIN EN ISO 7686:2005-10
Plastics pipes and fittings - Determination of opacity (ISO 7686:2005); German version EN ISO 7686:2005
10/1/2005 - PDF - English - DIN
Learn More€57.57 -
NF T54-034 (10/2005) (R2010)
Plastics piping systems made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and/or biaxial oriented poly(vinyl chloride) (PVC-BO) for conveyance under pressure of non gaseous fluids - Design rules, selection of components - Réseaux de canalisations en poly(chlorure de vinyle) non plastifié (PVC-U), poly(chlorure de vinyle) chloré (PVC-C) et/ou poly(chlorure de vinyle) orienté biaxial (PVC-BO) pour le transport sous pression de fluides non gazeux
10/1/2005 - Paper - French - AFNOR
Learn More€144.67 -
ISO/TS 7024:2005 (R2022)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Thermoplastics
9/19/2005 - Paper - French - ISO
Learn More€199.00 -
ISO/TS 7024:2005 (R2022)
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
Thermoplastics
9/19/2005 - Paper - English - ISO
Learn More€199.00 -
NBN EN ISO 7686:2005
Plastics pipes and fittings - Determination of opacity (ISO 7686:2005)
8/25/2005 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 7686:2005
Plastics pipes and fittings - Determination of opacity (ISO 7686:2005)
8/25/2005 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 7686:2005
Plastics pipes and fittings - Determination of opacity (ISO 7686:2005)
8/25/2005 - PDF - English - NBN
Learn More€37.00 -
BS ISO 16241:2005
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
8/23/2005 - PDF - English - BSI
Learn More€180.00 -
€48.00
-
€48.00
-
NBN EN ISO 3126:2005
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
5/25/2005 - PDF - French - NBN
Learn More€121.00 -
NBN EN ISO 3126:2005
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
5/25/2005 - PDF - German - NBN
Learn More€121.00 -
NBN EN ISO 3126:2005
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
5/25/2005 - PDF - English - NBN
Learn More€121.00 -
DIN EN ISO 3126:2005-05
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005); German version EN ISO 3126:2005
5/1/2005 - PDF - German - DIN
Learn More€85.79 -
DIN EN ISO 3126:2005-05
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005); German version EN ISO 3126:2005
5/1/2005 - PDF - English - DIN
Learn More€107.48 -
DVGW VP 624:2005-05
Kunststoffrohre aus vernetztem Polyethylen (PE-X) für die Trinkwasser und Gasinstallation - Gasinnenleitungen mit einem Betriebsdruck kleiner/gleich 100 m bar
5/1/2005 - PDF - German - DVGW
Learn More€43.76 -
ISO 11673:2005 (R2019)
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes
Determination of the fracture toughness properties
4/11/2005 - Paper - French - ISO
Learn More€110.00 -
ISO 11673:2005 (R2019)
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes
Determination of the fracture toughness properties
4/11/2005 - Paper - English - ISO
Learn More€110.00 -
€148.00
-
ASTM F2433-05(2018)
Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
1/1/2005 - PDF - English - ASTM
Learn More€51.00 -
ASTM F2433-05(2018) + Redline
Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
1/1/2005 - PDF - English - ASTM
Learn More€61.00 -
UNE-EN ISO 15875-5:2004 (R2008)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
7/30/2004 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 15875-5:2004 (R2008)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
7/30/2004 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 15875-3:2004 (R2008)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
7/30/2004 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 15875-3:2004 (R2008)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
7/30/2004 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 15875-1:2004 (R2008)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003)
7/23/2004 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 15875-1:2004 (R2008)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003)
7/23/2004 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 15875-2:2004 (R2008)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003)
7/23/2004 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 15875-2:2004 (R2008)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003)
7/23/2004 - PDF - English - AENOR
Learn More€81.60 -
ISO 8796:2004 (R2023)
Polyethylene PE 32 and PE 40 pipes for irrigation laterals
Susceptibility to environmental stress cracking induced by insert-type fittings
6/18/2004 - Paper - French - ISO
Learn More€48.00 -
ISO 8796:2004 (R2023)
Polyethylene PE 32 and PE 40 pipes for irrigation laterals
Susceptibility to environmental stress cracking induced by insert-type fittings
6/18/2004 - Paper - English - ISO
Learn More€48.00 -
DVGW VP 642:2004-06
Faserverstärkte PE-Rohre (RTP) und zugehörige Verbinder für Gasleitungen mit Betriebsdrücken über 16 bar
6/1/2004 - PDF - German - DVGW
Learn More€65.18 -
NF EN ISO 15875-5, T54-943-5 (05/2004)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5 : fitness for purpose of the system - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
5/1/2004 - Paper - French - AFNOR
Learn More€73.00 -
NF EN ISO 15875-3, T54-943-3 (05/2004)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3 : fittings - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide
5/1/2004 - Paper - French - AFNOR
Learn More€81.02 -
€36.27
-
€41.86
-
NF T54-970 (03/2004)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Electrofusion tapping tees - Design of tapping tees and leak flow rate for the cutter - Systèmes de canalisations en plastique pour la distribution de combustibles gazeux
3/1/2004 - Paper - French - AFNOR
Learn More€75.67 -
UNE-EN ISO 16871:2004 (R2008)
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
1/30/2004 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 16871:2004 (R2008)
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
1/30/2004 - PDF - English - AENOR
Learn More€68.40