23.040.20 : Plastics pipes
-
NBN EN ISO 11297-4:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Abwasserdruckleitungen - Teil 4: Vor Ort härtendes Schlauch-Lining (ISO 11297-4:2018)
3/23/2018 - PDF - German -
Learn More€58.00 -
NBN EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
3/23/2018 - PDF - French -
Learn More€58.00 -
NBN EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
3/23/2018 - PDF - English -
Learn More€58.00 -
NBN EN ISO 11296-4:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) - Teil 4: Vor Ort härtendes Schlauch-Lining (ISO 11296-4:2018)
3/23/2018 - PDF - German -
Learn More€163.00 -
NBN EN ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
3/23/2018 - PDF - English -
Learn More€58.00 -
NBN EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
3/23/2018 - PDF - French -
Learn More€58.00 -
NBN EN ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
3/23/2018 - PDF - English -
Learn More€58.00 -
NBN EN ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
3/23/2018 - PDF - English -
Learn More€163.00 -
NBN EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
3/23/2018 - PDF - German -
Learn More€58.00 -
BS EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with continuous pipes
3/16/2018 - PDF - English -
Learn More€180.00 -
PD CEN/TR 17179:2018
Thermoplastics piping and ducting systems. Rainwater infiltration and storage attenuation systems. Practices for underground installation
3/9/2018 - PDF - English -
Learn More€250.00 -
BS EN ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with cured-in-place pipes
3/1/2018 - PDF - English -
Learn More€180.00 -
BS EN ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with continuous pipes
3/1/2018 - PDF - English -
Learn More€180.00 -
ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks
Part 1: General
2/16/2018 - Paper - French -
Learn More€110.00 -
BS ISO 11922-1:2018
Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances Metric series
2/7/2018 - PDF - English -
Learn More€180.00 -
CEN/TR 17179:2018
Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for underground installation
2/3/2018 - PDF - English -
Learn More€121.00 -
NF EN ISO 11296-2, P16-364-2 (02/2018)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2 : Lining with continuous pipes - Systèmes de canalisation plastiques pour la rénovation des réseaux dassainissement gravitaires enterrés - Partie 2 : Réhabilition par tubage avec canalisations continues
2/1/2018 - Paper - French -
Learn More€58.62 -
DIN EN ISO 11173:2018-02
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
2/1/2018 - PDF - English -
Learn More€74.58 -
NF EN ISO 11297-2, P16-378-2 (02/2018)
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2 : lining with continuous pipes - Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sous pression - Partie 2 : Réhabilition par tubage avec canalisations continues
2/1/2018 - Paper - French -
Learn More€58.62 -
ASTM F1056-18(2022)
Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
2/1/2018 - PDF - English -
Learn More€54.00 -
DIN EN ISO 11173:2018-02
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994), German version EN ISO 11173:2017
2/1/2018 - PDF - German -
Learn More€59.63 -
NF EN ISO 11298-2, T54-967-2 (02/2018)
Plastics piping systems for renovation of underground water supply networks - Part 2 : lining with continuous pipes - Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 2 : Tubage par tuyau continu avec espace annulaire
2/1/2018 - Paper - French -
Learn More€58.62 -
XP T54-990 (02/2018)
Polyethylene (PE) pipes and fittings - Determination of the resistance to crack initiation and slow crack growth on notched cylindrical bars under constant load (NCBT)
2/1/2018 - Paper - French -
Learn More€75.67 -
NF EN ISO 11297-4, P16-378-4 (02/2018)
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4 : lining with cured-in-place pipes
2/1/2018 - Paper - French -
Learn More€73.23 -
ASTM F1056-18(2022) + Redline
Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
2/1/2018 - PDF - English -
Learn More€65.00 -
ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks
Part 2: Lining with continuous pipes
1/24/2018 - Paper - French -
Learn More€72.00 -
ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure
Part 2: Lining with continuous pipes
1/24/2018 - Paper - French -
Learn More€72.00 -
ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks
Part 2: Lining with continuous pipes
1/24/2018 - Paper - English -
Learn More€72.00 -
ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks
Part 2: Lining with continuous pipes
1/24/2018 - Paper - French -
Learn More€72.00 -
BS EN ISO 13262:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
1/19/2018 - PDF - English -
Learn More€151.00 -
€72.00
-
ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure
Part 4: Lining with cured-in-place pipes
1/11/2018 - Paper - French -
Learn More€72.00 -
ISO 11922-1:2018 (R2023)
Thermoplastics pipes for the conveyance of fluids
Dimensions and tolerances
1/8/2018 - Paper - English -
Learn More€110.00 -
ISO 161-1:2018 (R2023)
Thermoplastics pipes for the conveyance of fluids
Nominal outside diameters and nominal pressures
1/8/2018 - Paper - English -
Learn More€48.00 -
DIN EN ISO 3127:2018-01
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
1/1/2018 - PDF - English -
Learn More€91.12 -
DIN EN ISO 2507-1:2018-01
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995), German version EN ISO 2507-1:2017
1/1/2018 - PDF - German -
Learn More€52.90 -
NF EN ISO 11173, T54-910 (01/2018)
Thermoplastics pipes - Determination of resistance to external blows - Staircase method
1/1/2018 - Paper - French -
Learn More€46.55 -
DIN EN ISO 13264:2018-01
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
1/1/2018 - PDF - English -
Learn More€66.07 -
DIN EN ISO 13254:2018-01
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
1/1/2018 - PDF - English -
Learn More€57.57 -
ASTM D2517-18(2023)
Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
1/1/2018 - PDF - English -
Learn More€60.00 -
DIN EN ISO 2507-3:2018-01
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995), German version EN ISO 2507-3:2017
1/1/2018 - PDF - German -
Learn More€45.98 -
DIN EN ISO 13262:2018-01
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
1/1/2018 - PDF - English -
Learn More€57.57 -
DIN EN ISO 13255:2018-01
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
1/1/2018 - PDF - English -
Learn More€57.57 -
DIN EN ISO 13263:2018-01
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
1/1/2018 - PDF - English -
Learn More€57.57 -
DIN EN ISO 2507-2:2018-01
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995), German version EN ISO 2507-2:2017
1/1/2018 - PDF - German -
Learn More€45.98 -
DIN EN ISO 2507-1:2018-01
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
1/1/2018 - PDF - English -
Learn More€66.07 -
DIN EN ISO 13263:2018-01
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010), German version EN ISO 13263:2017
1/1/2018 - PDF - German -
Learn More€45.98 -
NF EN ISO 3127, T54-097 (01/2018)
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method
1/1/2018 - Paper - French -
Learn More€56.64 -
DIN EN ISO 3127:2018-01
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994), German version EN ISO 3127:2017
1/1/2018 - PDF - German -
Learn More€72.80 -
DIN EN ISO 9852:2018-01
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007), German version EN ISO 9852:2017
1/1/2018 - PDF - German -
Learn More€59.63 -
ASTM D2517-18(2023) + Redline
Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
1/1/2018 - PDF - English -
Learn More€72.00 -
DIN EN ISO 2507-3:2018-01
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
1/1/2018 - PDF - English -
Learn More€57.57 -
DIN EN ISO 13264:2018-01
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010), German version EN ISO 13264:2017
1/1/2018 - PDF - German -
Learn More€52.90 -
DIN EN ISO 13254:2018-01
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010), German version EN ISO 13254:2017
1/1/2018 - PDF - German -
Learn More€45.98 -
DIN EN ISO 9852:2018-01
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
1/1/2018 - PDF - English -
Learn More€74.58 -
DIN EN ISO 2507-2:2018-01
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
1/1/2018 - PDF - English -
Learn More€57.57 -
DIN EN ISO 13262:2018-01
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010), German version EN ISO 13262:2017
1/1/2018 - PDF - German -
Learn More€45.98 -
DIN EN ISO 13255:2018-01
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010), German version EN ISO 13255:2017
1/1/2018 - PDF - German -
Learn More€45.98 -
BS EN ISO 13260:2011+A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
12/6/2017 - PDF - English -
Learn More€180.00 -
UNE-EN ISO 13260:2012/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
12/5/2017 - PDF - English -
Learn More€40.80 -
UNE-EN ISO 13260:2012/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
12/5/2017 - PDF - Spanish -
Learn More€34.00 -
NF EN ISO 2507-3, T54-024-3 (12/2017)
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3 : test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
12/1/2017 - Paper - French -
Learn More€33.62 -
NF EN ISO 15876-2, T54-944-2 (12/2017)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2 : Pipes - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 2 : Tubes (ISO 15876-2:2003)
12/1/2017 - Paper - French -
Learn More€70.75 -
NF EN ISO 2507-1, T54-024-1 (12/2017)
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1 : general test method
12/1/2017 - Paper - French -
Learn More€33.62 -
NF EN ISO 2507-2, T54-024-2 (12/2017)
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2 : test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes - Tubes et raccords en matières thermoplastiques - Température de ramollissement Vicat - Partie 2 : Conditions particulières d'essai pour tubes et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) ou en poly(chlorure de vinyle) chloré (PVC-C) et tubes en poly(chlorure de vinyle) à
12/1/2017 - Paper - French -
Learn More€46.55 -
NF EN ISO 15876-1, T54-944-1 (12/2017)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1 : General
12/1/2017 - Paper - French -
Learn More€73.23 -
NF EN ISO 15876-5, T54-944-5 (12/2017)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5 : Fitness for purpose of the system
12/1/2017 - Paper - French -
Learn More€58.50 -
ISO 21307:2017 (R2023)
Plastics pipes and fittings
Butt fusion jointing procedures for polyethylene (PE) piping systems
11/30/2017 - Paper - English -
Learn More€110.00 -
NBN EN ISO 13262:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 2507-1:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 2507-3:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 2507-2:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 11173:2017
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 9852:2017
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 13263:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 13262:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 3127:2017
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
11/22/2017 - PDF - English -
Learn More€58.00 -
NBN EN ISO 13264:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 11173:2017
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 9852:2017
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13254:2017
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 13255:2017
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 3127:2017
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
11/22/2017 - PDF - French -
Learn More€58.00 -
NBN EN ISO 2507-3:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 2507-2:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 2507-1:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13254:2017
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13263:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 13262:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 2507-3:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13264:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 11173:2017
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 9852:2017
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 13263:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13255:2017
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 3127:2017
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
11/22/2017 - PDF - German -
Learn More€58.00 -
NBN EN ISO 13264:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 2507-2:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 2507-1:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 13254:2017
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 13255:2017
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
11/22/2017 - PDF - French -
Learn More€37.00 -
€41.86 -
NBN EN ISO 13260:2011/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
10/25/2017 - PDF - French -
Learn More€20.00 -
NBN EN ISO 13260:2011/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
10/25/2017 - PDF - English -
Learn More€20.00 -
NBN EN ISO 13260:2011/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
10/25/2017 - PDF - German -
Learn More€20.00 -
DIN 4925-2:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 2: DN 100 to DN 200 with trapezoidal thread
10/1/2017 - PDF - English -
Learn More€74.58 -
DIN 4925-3:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 3: DN 250 to DN 400 with trapezoidal thread.
10/1/2017 - PDF - German -
Learn More€52.90 -
NF EN ISO 13264, T54-939 (10/2017)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
10/1/2017 - Paper - French -
Learn More€46.55 -
DIN 4925-1:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 1: DN 35 to DN 100 with pipe thread.
10/1/2017 - PDF - German -
Learn More€45.98 -
DIN 4925-3:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 3: DN 250 to DN 400 with trapezoidal thread
10/1/2017 - PDF - English -
Learn More€66.07 -
NF EN ISO 13254, T54-901 (10/2017)
Thermoplastics piping systems for non-pressure applications - Test method for watertightness - Systèmes de canalisations thermoplastiques pour applications sans pression - Méthode d'essai de l'étanchéité à l'eau (ISO 13254:2010)
10/1/2017 - Paper - French -
Learn More€33.62 -
NF EN ISO 13255, T54-902 (10/2017)
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
10/1/2017 - Paper - French -
Learn More€33.62 -
DIN 4726:2017-10
Warm water surface heating systems and radiator connecting systems - Plastics piping systems and multilayer piping systems
10/1/2017 - PDF - German -
Learn More€72.80 -
DIN 4925-1:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 1: DN 35 to DN 100 with pipe thread
10/1/2017 - PDF - English -
Learn More€57.57 -
DIN 4925-2:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 2: DN 100 to DN 200 with trapezoidal thread.
10/1/2017 - PDF - German -
Learn More€59.63 -
NF EN ISO 13262, T54-925 (10/2017)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
10/1/2017 - Paper - French -
Learn More€33.62 -
NF EN ISO 9852, T54-006 (10/2017)
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method
10/1/2017 - Paper - French -
Learn More€46.55 -
PD ISO/TS 12512:2017
Glass reinforced thermosetting plastic (GRP) pipes. Determination of initial specific ring stiffness using segment test species cut from a pipe
9/22/2017 - PDF - English -
Learn More€250.00 -
ASTM D3567-17(2022)
Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
9/1/2017 - PDF - English -
Learn More€46.00 -
NF EN ISO 13260/A1, P16-360/A1 (09/2017)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1
9/1/2017 - Paper - French -
Learn More€25.50 -
17/30339710 DC:2017
BS ISO 21138-3. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 3. Pipes and fittings with non-smooth external surface, Type B
8/29/2017 - PDF - English -
Learn More€24.00 -
17/30339707 DC:2017
BS ISO 21138-2. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 2. Pipes and fittings with smooth external surface, Type A
8/23/2017 - PDF - English -
Learn More€24.00 -
BS ISO 12176-1:2017
Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Butt
8/16/2017 - PDF - English -
Learn More€293.00 -
PD ISO/TS 20656-1:2017
Plastics piping systems. General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes Buried
7/28/2017 - PDF - English -
Learn More€293.00 -
BS ISO 13761:2017
Plastics pipes and fittings. Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 °C
7/28/2017 - PDF - English -
Learn More€180.00 -
ISO/TS 12512:2017 (R2021)
Glass reinforced thermosetting plastic (GRP) pipes
Determination of initial specific ring stiffness using segment test species cut from a pipe
7/19/2017 - Paper - English -
Learn More€148.00 -
ISO 13761:2017 (R2023)
Plastics pipes and fittings
Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
7/18/2017 - Paper - English -
Learn More€48.00 -
UNE-EN ISO 15876-3:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017)
7/12/2017 - PDF - Spanish -
Learn More€70.00 -
UNE-EN ISO 15876-2:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017)
7/12/2017 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 15876-5:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
7/12/2017 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 15876-1:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017)
7/12/2017 - PDF - Spanish -
Learn More€63.00 -
UNE-EN ISO 15876-3:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017)
7/12/2017 - PDF - English -
Learn More€84.00 -
UNE-EN ISO 15876-2:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017)
7/12/2017 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 15876-1:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017)
7/12/2017 - PDF - English -
Learn More€75.60 -
UNE-EN ISO 15876-5:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
7/12/2017 - PDF - Spanish -
Learn More€60.00 -
DVGW GW 326:2017-07
Mechanical Joining of PE Pipes in Gas and Water Distribution (Networks) - Competent Person and Supervisor - Requirements and Qualification
7/1/2017 - PDF - German -
Learn More€43.76 -
ISO 7510:2017 (R2022)
Plastics piping systems
Glass-reinforced plastics (GRP) components
6/28/2017 - Paper - English -
Learn More€48.00 -
BS ISO 16611:2017
Plastics piping systems for drainage and sewerage without pressure. Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP). Dimensions, requirements and tests
6/22/2017 - PDF - English -
Learn More€293.00 -
ISO/TS 20656-1:2017 (R2023)
Plastics piping systems
General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes
6/13/2017 - Paper - English -
Learn More€148.00 -
DIN EN ISO 15876-1:2017-06
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017), German and English version EN ISO 15876-1:2017.
6/1/2017 - PDF - English, German -
Learn More€79.72 -
UNE 53943:2017
Plastic networks to centralize water meters. Polyethylene (PE), polypropylene (PP) and polybutylene (PB) networks with butt welded joints
5/3/2017 - PDF - Spanish -
Learn More€68.00 -
NF EN ISO 15493/A1, T54-947/A1 (04/2017)
Systèmes de canalisations en matières plastiques pour les applications industrielles - Acrylonitrile-butadiène-styrène (ABS), poly(chlorure de vinyle) non plastifié (PVC-U) et poly(chlorure de vinyle) chloré (PVC-C) - Spécifications pour les composants et le système - Série métrique - Amendement 1
4/1/2017 - Paper - French -
Learn More€31.00 -
NBN EN ISO 15876-2:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017)
3/22/2017 - PDF - French -
Learn More€89.00 -
NBN EN ISO 15876-5:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
3/22/2017 - PDF - English -
Learn More€58.00 -
NBN EN ISO 15876-5:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
3/22/2017 - PDF - French -
Learn More€58.00 -
NBN EN ISO 15876-2:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017)
3/22/2017 - PDF - German -
Learn More€89.00 -
NBN EN ISO 15876-5:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
3/22/2017 - PDF - German -
Learn More€58.00 -
NBN EN ISO 15876-2:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017)
3/22/2017 - PDF - English -
Learn More€89.00 -
ASTM D5677-17(2023)
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
3/1/2017 - PDF - English -
Learn More€60.00 -
ASTM D5677-17(2023) + Redline
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
3/1/2017 - PDF - English -
Learn More€72.00 -
UNE-EN 12200-1:2017
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
1/25/2017 - PDF - Spanish -
Learn More€77.00 -
UNE-EN 12200-1:2017
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
1/25/2017 - PDF - English -
Learn More€92.40 -
ISO 15876-2:2017 (R2022)
Plastics piping systems for hot and cold water installations
Polybutene (PB)
1/10/2017 - Paper - French -
Learn More€110.00 -
ISO 15876-5:2017 (R2022)
Plastics piping systems for hot and cold water installations
Polybutene (PB)
1/10/2017 - Paper - French -
Learn More€72.00 -
ASTM D3567-17(2022) + Redline
Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
1/1/2017 - PDF - English -
Learn More€53.00 -
ASTM F2929-17(2021)
Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
1/1/2017 - PDF - English -
Learn More€54.00 -
XP CEN/TS 14758-2, P16-366-2 (01/2017)
Plastics piping sytems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-M) - Part 2 : guidance for the assessment of conformity
1/1/2017 - Paper - French -
Learn More€75.67 -
ASTM F2929-17(2021) + Redline
Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
1/1/2017 - PDF - English -
Learn More€65.00 -
ISO/TS 17902:2016 (R2024)
Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
General information
11/4/2016 - Paper - English -
Learn More€110.00 -
DIN 16868-2:2016-10
Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: Wound, filled, general quality requirements, testing
10/1/2016 - PDF - German -
Learn More€79.72 -
DIN EN 12200-1:2016-10
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system, German version EN 12200-1:2016
10/1/2016 - PDF - German -
Learn More€99.35 -
DIN 16868-1:2016-10
Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Wound, filled, dimensions
10/1/2016 - PDF - German -
Learn More€52.90 -
DIN EN 12200-1:2016-10
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
10/1/2016 - PDF - English -
Learn More€124.21 -
UNE 53008-2:2016
Plastics piping systems. Multilayer pipe systems for gas installations pipework with a maximum operating pressure up to and including 5 bar (500 kPa). Part 2: Design, installation and maintenance
9/21/2016 - PDF - Spanish -
Learn More€68.00 -
DVGW G 5628:2016-09
Installation Systems for Gas Installation inside Buildings, consisting of Multi-Layer Pipes and their corresponding Fittings, for an Operating Pressure less than or equal to 100 mbar - Requirements and Testing
9/1/2016 - PDF - German -
Learn More€121.30 -
ASTM F1668-16(2022)
Standard Guide for Construction Procedures for Buried Plastic Pipe
8/1/2016 - PDF - English -
Learn More€57.00 -
DIN EN ISO 9967:2016-07
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
7/1/2016 - PDF - English -
Learn More€91.12 -
DIN EN ISO 9967:2016-07
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016), German version EN ISO 9967:2016
7/1/2016 - PDF - German -
Learn More€72.80 -
BS EN 12200-1:2016
Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications pipes, fittings and the system
6/30/2016 - PDF - English -
Learn More€293.00 -
DIN EN ISO 9969:2016-06
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016), German version EN ISO 9969:2016
6/1/2016 - PDF - German -
Learn More€59.63 -
DIN EN ISO 9969:2016-06
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
6/1/2016 - PDF - English -
Learn More€74.58 -
NBN EN 12200-1:2016
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
5/27/2016 - PDF - French -
Learn More€142.00 -
NBN EN 12200-1:2016
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
5/27/2016 - PDF - German -
Learn More€142.00 -
NBN EN 12200-1:2016
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
5/27/2016 - PDF - English -
Learn More€142.00 -
16/30314675 DC:2016
BS ISO 19469-1. Plastic piping systems for non pressure underground drainage. Single wall corrugated piping systems of polyethylene (PE), polypropylene (PP) and unplasticized poly(vinyl chloride) (PVC-U). Part 1. General requirements and performance characteristics
5/6/2016 - PDF - English -
Learn More€24.00 -
16/30314617 DC:2016
BS ISO 19469-3. Plastic piping systems for non pressure underground drainage. Single wall corrugated piping systems of polyethylene (PE), polypropylene (PP) and unplasticized poly(vinyl chloride) (PVC-U). Part 3. Pipes and fittings for deep burial installations
5/6/2016 - PDF - English -
Learn More€24.00 -
DIN 8061:2016-05
Unplasticized polyvinyl chloride (PVC-U) pipes - General quality requirements, testing, Text in German and English
5/1/2016 - PDF - English, German -
Learn More€79.72 -
UNE-EN ISO 9969:2016
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
4/20/2016 - PDF - Spanish -
Learn More€58.00 -
UNE-EN ISO 9967:2016
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
4/20/2016 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 9969:2016
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
4/20/2016 - PDF - English -
Learn More€69.60 -
UNE-EN ISO 9967:2016
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
4/20/2016 - PDF - English -
Learn More€81.60 -
NBN EN ISO 9967:2016
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
2/26/2016 - PDF - English -
Learn More€58.00 -
NBN EN ISO 9967:2016
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
2/26/2016 - PDF - French -
Learn More€58.00 -
NBN EN ISO 9969:2016
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
2/26/2016 - PDF - English -
Learn More€58.00 -
NBN EN ISO 9969:2016
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
2/26/2016 - PDF - French -
Learn More€58.00 -
NBN EN ISO 9967:2016
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
2/26/2016 - PDF - German -
Learn More€58.00 -
NBN EN ISO 9969:2016
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
2/26/2016 - PDF - German -
Learn More€58.00 -
€250.00
-
€180.00
-
€72.00
-
€72.00
-
€72.00
-
€72.00
-
ASTM F585-16(2021) + Redline
Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
1/1/2016 - PDF - English -
Learn More€61.00 -
ASTM F2786-16(2021)
Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
1/1/2016 - PDF - English -
Learn More€51.00 -
ASTM F1668-16(2022) + Redline
Standard Guide for Construction Procedures for Buried Plastic Pipe
1/1/2016 - PDF - English -
Learn More€68.00 -
ASTM E1118/E1118M-16(2020)
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
1/1/2016 - PDF - English -
Learn More€57.00 -
ASTM F1055-16a(2022) + Redline
Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
1/1/2016 - PDF - English -
Learn More€72.00 -
ASTM F1760-16(2020)
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
1/1/2016 - PDF - English -
Learn More€51.00 -
ASTM F667/F667M-16(2021)
Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
1/1/2016 - PDF - English -
Learn More€51.00
