23.040.20 : Plastics pipes
-
ASTM F1734-19
Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
1/1/2019 - PDF - English -
Learn More€46.00 -
ASTM F1290-19
Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
1/1/2019 - PDF - English -
Learn More€46.00 -
ASTM F1734-19 + Redline
Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
1/1/2019 - PDF - English -
Learn More€53.00 -
ASTM F1290-19 + Redline
Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
1/1/2019 - PDF - English -
Learn More€53.00 -
UNE-EN ISO 15874-2:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
12/26/2018 - PDF - Spanish -
Learn More€39.00 -
UNE-EN ISO 15874-5:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
12/26/2018 - PDF - English -
Learn More€55.20 -
UNE-EN ISO 15874-3:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
12/26/2018 - PDF - English -
Learn More€40.80 -
UNE-EN ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
12/26/2018 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 15874-2:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
12/26/2018 - PDF - English -
Learn More€46.80 -
UNE-EN ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
12/26/2018 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 15874-5:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
12/26/2018 - PDF - Spanish -
Learn More€46.00 -
UNE-EN ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
12/26/2018 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 15874-3:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
12/26/2018 - PDF - Spanish -
Learn More€34.00 -
UNE-EN ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
12/26/2018 - PDF - English -
Learn More€88.80 -
CEN ISO/TS 15876-7:2018
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2018)
12/25/2018 - PDF - German -
Learn More€89.00 -
CEN ISO/TS 15877-7:2018
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018)
12/25/2018 - PDF - English -
Learn More€58.00 -
CEN ISO/TS 15875-7:2018
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2018)
12/25/2018 - PDF - German -
Learn More€89.00 -
CEN ISO/TS 15876-7:2018
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2018)
12/25/2018 - PDF - English -
Learn More€89.00 -
CEN ISO/TS 15875-7:2018
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2018)
12/25/2018 - PDF - English -
Learn More€89.00 -
CEN ISO/TS 15877-7:2018
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018)
12/25/2018 - PDF - German -
Learn More€58.00 -
BS EN ISO 13257:2018
Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
12/19/2018 - PDF - English -
Learn More€180.00 -
BS EN ISO 11299-3:2018
Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes
12/12/2018 - PDF - English -
Learn More€250.00 -
BS EN ISO 11299-1:2018
Plastics piping systems for renovation of underground gas supply networks General
12/11/2018 - PDF - English -
Learn More€250.00 -
BS EN ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks Lining with continuous pipes
12/11/2018 - PDF - English -
Learn More€180.00 -
BS EN ISO 19893:2018
Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling
12/7/2018 - PDF - English -
Learn More€151.00 -
NF EN ISO 11299-3, T54-966-3 (12/2018)
Plastics piping systems for renovation of underground gas supply networks - Part 3 : lining with close-fit pipes
12/1/2018 - Paper - French -
Learn More€73.23 -
DIN EN ISO 19893:2018-12
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
12/1/2018 - PDF - English -
Learn More€82.52 -
NF EN ISO 11299-1, T54-966-1 (12/2018)
Plastics piping systems for renovation of underground gas supply networks - Part 1 : general
12/1/2018 - Paper - French -
Learn More€73.23 -
DIN EN ISO 11298-3:2018-12
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018), German version EN ISO 11298-3:2018.
12/1/2018 - PDF - German -
Learn More€85.79 -
NF EN ISO 13257, T54-903 (12/2018)
Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
12/1/2018 - Paper - French -
Learn More€60.50 -
DIN EN ISO 19893:2018-12
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011), German version EN ISO 19893:2018
12/1/2018 - PDF - German -
Learn More€65.89 -
NBN EN ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
11/27/2018 - PDF - English -
Learn More€89.00 -
NBN EN ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
11/27/2018 - PDF - German -
Learn More€89.00 -
NBN EN ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
11/27/2018 - PDF - French -
Learn More€89.00 -
NBN EN ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
11/27/2018 - PDF - English -
Learn More€89.00 -
NBN EN ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
11/27/2018 - PDF - German -
Learn More€89.00 -
NBN EN ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
11/27/2018 - PDF - French -
Learn More€89.00 -
BS EN ISO 3127:2017
Thermoplastics pipes. Determination of resistance to external blows. Round-the-clock method
11/9/2018 - PDF - English -
Learn More€180.00 -
BS EN ISO 9852:2017
Unplasticized poly(vinyl chloride) (PVC-U) pipes. Dichloromethane resistance at specified temperature (DCMT). Test method
11/9/2018 - PDF - English -
Learn More€180.00 -
ISO 13257:2018
Thermoplastics piping systems for non-pressure applications
Test method for resistance to elevated temperature cycling
11/8/2018 - Paper - French -
Learn More€72.00 -
ISO 13257:2018
Thermoplastics piping systems for non-pressure applications
Test method for resistance to elevated temperature cycling
11/8/2018 - Paper - English -
Learn More€72.00 -
BS EN ISO 13254:2017
Thermoplastics piping systems for non-pressure applications. Test method for watertightness
11/8/2018 - PDF - English -
Learn More€151.00 -
UNE-EN ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
11/7/2018 - PDF - English -
Learn More€84.00 -
BS EN ISO 11173:2017
Thermoplastics pipes. Determination of resistance to external blows. Staircase method
11/7/2018 - PDF - English -
Learn More€151.00 -
UNE-EN ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
11/7/2018 - PDF - Spanish -
Learn More€98.00 -
UNE-EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
11/7/2018 - PDF - Spanish -
Learn More€70.00 -
UNE-EN ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
11/7/2018 - PDF - Spanish -
Learn More€70.00 -
UNE-EN ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
11/7/2018 - PDF - English -
Learn More€117.60 -
UNE-EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
11/7/2018 - PDF - English -
Learn More€84.00 -
DIN 16875:2018-11
Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for ducting - Dimensions and technical delivery conditions
11/1/2018 - PDF - German -
Learn More€79.72 -
ASTM F645-18b
Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
11/1/2018 - PDF - English -
Learn More€57.00 -
ASTM F645-18b + Redline
Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
11/1/2018 - PDF - English -
Learn More€68.00 -
NBN T 42-010:2018
Polyethylene (PE) piping systems ? Directives for the execution of butt fusion and electrofusion joints
10/30/2018 - PDF - French -
Learn More€89.00 -
NBN EN ISO 19893:2018
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
10/30/2018 - PDF - English -
Learn More€58.00 -
NBN T 42-011:2018
Polyethylene (PE) piping systems ? Directives for the formation, qualification and re-approval of welders executing butt fusion and electrofusion
10/30/2018 - PDF - Dutch -
Learn More€58.00 -
NBN EN ISO 19893:2018
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
10/30/2018 - PDF - French -
Learn More€58.00 -
NBN T 42-010:2018
Polyethylene (PE) piping systems ? Directives for the execution of butt fusion and electrofusion joints
10/30/2018 - PDF - Dutch -
Learn More€89.00 -
NBN EN ISO 19893:2018
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
10/30/2018 - PDF - German -
Learn More€58.00 -
NBN T 42-011:2018
Polyethylene (PE) piping systems ? Directives for the formation, qualification and re-approval of welders executing butt fusion and electrofusion
10/30/2018 - PDF - French -
Learn More€58.00 -
ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks
Part 2: Lining with continuous pipes
10/26/2018 - Paper - English -
Learn More€72.00 -
ISO 11299-2:2018
Plastics piping systems for renovation of underground gas supply networks
Part 2: Lining with continuous pipes
10/26/2018 - Paper - French -
Learn More€72.00 -
BS EN ISO 11298-3:2018
Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes
10/18/2018 - PDF - English -
Learn More€250.00 -
BS EN ISO 11297-3:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes
10/17/2018 - PDF - English -
Learn More€250.00 -
NF EN ISO 11297-3, P16-378-3 (10/2018)
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3 : lining with close-fit pipes
10/1/2018 - Paper - French -
Learn More€75.50 -
NF EN ISO 15494, T54-946 (10/2018)
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Systèmes de canalisations en matières plastiques pour les applications industrielles - Polybutène (PB), polyéthylène (PE), polyéthylène de meilleure résistance à la température (PE-RT), polyéthylène réticulé (PEX), polypropylène (PP) - Séries métriques pour les spécifications pour les composants
10/1/2018 - Paper - French -
Learn More€167.00 -
NF EN ISO 11298-3, T54-967-3 (10/2018)
Plastics piping systems for renovation of underground water supply networks - Part 3 : lining with close-fit pipes
10/1/2018 - Paper - French -
Learn More€73.23 -
BS EN ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with close-fit pipes
9/27/2018 - PDF - English -
Learn More€250.00 -
UNE-EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
9/19/2018 - PDF - Spanish -
Learn More€68.00 -
NBN EN ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
9/19/2018 - PDF - German -
Learn More€89.00 -
UNE-EN ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
9/19/2018 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
9/19/2018 - PDF - English -
Learn More€81.60 -
NBN EN ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
9/19/2018 - PDF - English -
Learn More€89.00 -
NBN EN ISO 11296-3:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
9/19/2018 - PDF - French -
Learn More€89.00 -
UNE-EN ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
9/19/2018 - PDF - Spanish -
Learn More€68.00 -
BS ISO 10508:2006+A1:2018
Plastics piping systems for hot and cold water installations. Guidance for classification and design
9/6/2018 - PDF - English -
Learn More€180.00 -
UNE-EN ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
9/5/2018 - PDF - Spanish -
Learn More€69.00 -
UNE-EN ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
9/5/2018 - PDF - English -
Learn More€82.80 -
DIN EN ISO 11296-2:2018-09
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
9/1/2018 - PDF - English -
Learn More€91.12 -
ASTM D1599-18
Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
9/1/2018 - PDF - English -
Learn More€46.00 -
DIN 16965-5 Berichtigung 1:2018-09
Pipes of glass fibre reinforced polyester resin (UP-GF), wound, Type E pipes, dimensions, Corrigendum 1
9/1/2018 - PDF - English -
Learn More€0.00 -
NF EN ISO 19892, T54-942 (09/2018)
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling
9/1/2018 - Paper - French -
Learn More€33.33 -
ASTM F2945-18(2023) + Redline
Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
9/1/2018 - PDF - English -
Learn More€79.00 -
DIN EN ISO 11297-2:2018-09
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018), German version EN ISO 11297-2:2018
9/1/2018 - PDF - German -
Learn More€72.80 -
DIN EN ISO 11297-1:2018-09
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
9/1/2018 - PDF - English -
Learn More€107.48 -
DIN EN ISO 11297-2:2018-09
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
9/1/2018 - PDF - English -
Learn More€91.12 -
DIN EN ISO 11296-1:2018-09
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018), German version EN ISO 11296-1:2018
9/1/2018 - PDF - German -
Learn More€85.79 -
ASTM D1599-18 + Redline
Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
9/1/2018 - PDF - English -
Learn More€53.00 -
NF EN ISO 19893, T54-940 (09/2018)
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
9/1/2018 - Paper - French -
Learn More€58.50 -
DIN EN ISO 11297-4:2018-09
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018), German version EN ISO 11297-4:2018
9/1/2018 - PDF - German -
Learn More€79.72 -
DIN EN ISO 11296-2:2018-09
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018), German version EN ISO 11296-2:2018
9/1/2018 - PDF - German -
Learn More€72.80 -
DIN EN ISO 11296-1:2018-09
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
9/1/2018 - PDF - English -
Learn More€107.48 -
DIN 16965-5 Berichtigung 1:2018-09
Pipes of glass fibre reinforced polyester resin (UP-GF), wound, Type E pipes, dimensions, Corrigendum 1
9/1/2018 - PDF - German -
Learn More€0.00 -
ASTM F2945-18(2023)
Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
9/1/2018 - PDF - English -
Learn More€66.00 -
DIN EN ISO 11297-4:2018-09
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
9/1/2018 - PDF - English -
Learn More€99.44 -
DIN EN ISO 11297-1:2018-09
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018), German version EN ISO 11297-1:2018
9/1/2018 - PDF - German -
Learn More€85.79 -
NF EN 16436-1/IN2, D36-381-1/IN2 (09/2018)
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1 : hoses and tubings
9/1/2018 - Paper - French -
Learn More€23.00 -
NBN EN ISO 15874-5:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
8/28/2018 - PDF - English -
Learn More€20.00 -
NBN EN ISO 15874-5:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
8/28/2018 - PDF - French -
Learn More€20.00 -
NBN EN ISO 15874-2:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
8/28/2018 - PDF - English -
Learn More€20.00 -
NBN EN ISO 15874-5:2013/A1:2018
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
8/28/2018 - PDF - German -
Learn More€20.00 -
NBN EN ISO 15874-2:2013/A1:2018
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 2: Tubes - Amendement 1 (ISO 15874-2:2013/Amd 1:2018)
8/28/2018 - PDF - French -
Learn More€20.00 -
BS EN ISO 15874-5:2013+A1:2018
Plastics piping systems for hot and cold water installations. Polypropylene (PP) Fitness purpose of the system
8/9/2018 - PDF - English -
Learn More€180.00 -
BS EN ISO 2507-2:2017
Thermoplastics pipes and fittings. Vicat softening temperature Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated (PVC-C) fittings high impact resistance poly (vinyl (PVC-HI)
8/3/2018 - PDF - English -
Learn More€151.00 -
BS EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks Lining with continuous pipes
8/2/2018 - PDF - English -
Learn More€180.00 -
NF EN ISO 15874-3/A1, T54-938-3/A1 (08/2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : fittings - Amendment 1
8/1/2018 - Paper - French -
Learn More€25.67 -
ASTM F2928-18(2023)
Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
8/1/2018 - PDF - English -
Learn More€54.00 -
DIN 16961-2:2018-08
Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 2: Technical delivery specifications
8/1/2018 - PDF - German -
Learn More€99.35 -
NF EN ISO 11296-3, P16-364-3 (08/2018)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3 : lining with close-fit pipes
8/1/2018 - Paper - French -
Learn More€73.00 -
NF EN ISO 15874-2/A1, T54-938-2/A1 (08/2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : pipes - Amendment 1
8/1/2018 - Paper - French -
Learn More€25.50 -
DIN 8075:2018-08
Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing, Text in German and English
8/1/2018 - PDF - English, German -
Learn More€85.79 -
ASTM F402-18
Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
8/1/2018 - PDF - English -
Learn More€46.00 -
ASTM F2928-18(2023) + Redline
Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
8/1/2018 - PDF - English -
Learn More€65.00 -
DIN 16961-1:2018-08
Thermoplastics pipes and fittings with profiled wall and smooth pipe inside - Part 1: Classification and dimensions
8/1/2018 - PDF - German -
Learn More€72.80 -
NF EN ISO 15874-5/A1, T54-938-5/A1 (08/2018)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5 : fitness for purpose of the system - Amendment 1
8/1/2018 - Paper - French -
Learn More€34.67 -
ASTM F402-18 + Redline
Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
8/1/2018 - PDF - English -
Learn More€53.00 -
UNE-EN ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
7/25/2018 - PDF - English -
Learn More€81.60 -
UNE 53394:2018 IN
Plastics. Code for the installation and handling of polyethylene (PE) pipes for water piping under pressure. Recommended techniques
7/25/2018 - PDF - Spanish -
Learn More€85.00 -
UNE-EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
7/25/2018 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
7/25/2018 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
7/25/2018 - PDF - English -
Learn More€81.60 -
BS ISO 18489:2015
Polyethylene (PE) materials for piping systems. Determination of resistance to slow crack growth under cyclic loading. Cracked Round Bar test method
7/2/2018 - PDF - English -
Learn More€180.00 -
DIN EN ISO 11298-1:2018-07
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018), German version EN ISO 11298-1:2018
7/1/2018 - PDF - German -
Learn More€85.79 -
DIN EN ISO 11298-1:2018-07
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
7/1/2018 - PDF - English -
Learn More€107.48 -
ISO 15874-5:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
6/25/2018 - Paper - French -
Learn More€21.00 -
ISO 15874-2:2013/Amd 1:2018
Plastics piping systems for hot and cold water installations
Polypropylene (PP)
6/25/2018 - Paper - French -
Learn More€21.00 -
NBN EN ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
6/20/2018 - PDF - German -
Learn More€89.00 -
NBN EN ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
6/20/2018 - PDF - English -
Learn More€121.00 -
NBN EN ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
6/20/2018 - PDF - English -
Learn More€89.00 -
NBN EN ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
6/20/2018 - PDF - French -
Learn More€89.00 -
NBN EN ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
6/20/2018 - PDF - French -
Learn More€121.00 -
BS EN ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks Replacement on line by pipe bursting and extraction
6/7/2018 - PDF - English -
Learn More€250.00 -
BS EN ISO 13255:2017
Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for airtightness of joints
6/6/2018 - PDF - English -
Learn More€151.00 -
BS EN 13476-1:2018
Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) General requirements performance characteristics
6/5/2018 - PDF - English -
Learn More€250.00 -
BS EN ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks Replacement off line by horizontal directional drilling and impact moling
6/5/2018 - PDF - English -
Learn More€250.00 -
BS EN ISO 13264:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings
6/1/2018 - PDF - English -
Learn More€151.00 -
BS EN ISO 13263:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
6/1/2018 - PDF - English -
Learn More€151.00 -
BS EN ISO 2507-1:2017
Thermoplastics pipes and fittings. Vicat softening temperature General test method
5/31/2018 - PDF - English -
Learn More€151.00 -
UNE 53367-1:2014/1M:2018
Plastics. Plastics piping systems for water supply for irrigation. Part 1: Specifications for polyethylene pipes
5/30/2018 - PDF - Spanish -
Learn More€17.00 -
UNE-EN ISO 3127:2018
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
5/23/2018 - PDF - Spanish -
Learn More€63.00 -
UNE-EN ISO 11173:2018
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
5/23/2018 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 3127:2018
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
5/23/2018 - PDF - English -
Learn More€75.60 -
UNE-EN ISO 11173:2018
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
5/23/2018 - PDF - Spanish -
Learn More€60.00 -
BS ISO 10471:2018
Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
5/21/2018 - PDF - English -
Learn More€180.00 -
BS EN ISO 2507-3:2017
Thermoplastics pipes and fittings. Vicat softening temperature Test conditions for acrylonitrile/butadiene/styrene (ABS) andacrylonitrile/styrene/acrylic ester (ASA) fittings
5/18/2018 - PDF - English -
Learn More€151.00 -
ISO 10471:2018
Glass-reinforced thermosetting plastics (GRP) pipes
Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
5/17/2018 - Paper - English -
Learn More€72.00 -
UNE-EN ISO 9852:2018
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
5/9/2018 - PDF - Spanish -
Learn More€57.00 -
UNE-EN ISO 9852:2018
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
5/9/2018 - PDF - English -
Learn More€68.40 -
UNE-EN ISO 13254:2018
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
5/3/2018 - PDF - English -
Learn More€58.80 -
UNE-EN ISO 13255:2018
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
5/3/2018 - PDF - Spanish -
Learn More€49.00 -
UNE-EN ISO 13254:2018
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
5/3/2018 - PDF - Spanish -
Learn More€49.00 -
UNE-EN ISO 13255:2018
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
5/3/2018 - PDF - English -
Learn More€58.80 -
NF EN ISO 11296-1, P16-364-1 (05/2018)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1 : general
5/1/2018 - Paper - French -
Learn More€73.23 -
NF EN ISO 21225-2, T54-960-2 (05/2018)
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2 : replacement off the line by horizontal directional drilling and impact moling - Systèmes de canalisations en plastique pour la remplacement sans tranchée des réseaux enterrés - Partie 2 : Remplacement hors ligne par forage horizontal dirigé et fonçage par fusée
5/1/2018 - Paper - French -
Learn More€73.23 -
DIN EN ISO 11298-2:2018-05
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018), German version EN ISO 11298-2:2018.
5/1/2018 - PDF - German -
Learn More€72.80 -
DIN EN ISO 11298-2:2018-05
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
5/1/2018 - PDF - English -
Learn More€91.12 -
NF EN ISO 21225-1, T54-960-1 (05/2018)
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1 : replacement on the line by pipe bursting and pipe extraction
5/1/2018 - Paper - French -
Learn More€73.23 -
NBN EN ISO 11297-1:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Abwasserdruckleitungen - Teil 1: Allgemeines (ISO 11297-1:2018)
4/27/2018 - PDF - German -
Learn More€89.00 -
NBN EN ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
4/27/2018 - PDF - English -
Learn More€89.00 -
NBN EN ISO 11296-1:2018
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) — Teil 1: Allgemeines (ISO 11296-1:2018)
4/27/2018 - PDF - German -
Learn More€89.00 -
NBN EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
4/27/2018 - PDF - English -
Learn More€89.00 -
NBN EN ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
4/27/2018 - PDF - French -
Learn More€89.00 -
NBN EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
4/27/2018 - PDF - French -
Learn More€89.00 -
NBN EN ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
4/27/2018 - PDF - French -
Learn More€89.00 -
NBN EN ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
4/27/2018 - PDF - English -
Learn More€89.00 -
NBN EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
4/27/2018 - PDF - German -
Learn More€89.00 -
UNE-EN ISO 13263:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
4/25/2018 - PDF - Spanish -
Learn More€46.00 -
UNE-EN ISO 13262:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
4/25/2018 - PDF - Spanish -
Learn More€49.00 -
UNE-EN ISO 13264:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
4/25/2018 - PDF - English -
Learn More€63.60 -
UNE-EN ISO 10619-1:2018
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
4/25/2018 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 13263:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
4/25/2018 - PDF - English -
Learn More€55.20 -
UNE-EN ISO 13262:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
4/25/2018 - PDF - English -
Learn More€58.80 -
UNE-EN ISO 10619-1:2018
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
4/25/2018 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 13264:2018
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
4/25/2018 - PDF - Spanish -
Learn More€53.00 -
BS EN ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure General
4/20/2018 - PDF - English -
Learn More€250.00 -
UNE-EN ISO 2507-1:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
4/18/2018 - PDF - Spanish -
Learn More€53.00 -
UNE-EN ISO 2507-3:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
4/18/2018 - PDF - English -
Learn More€58.80 -
UNE-EN ISO 2507-2:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
4/18/2018 - PDF - English -
Learn More€62.40 -
BS EN ISO 11296-1:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks General
4/18/2018 - PDF - English -
Learn More€250.00 -
UNE-EN ISO 2507-1:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
4/18/2018 - PDF - English -
Learn More€63.60 -
UNE-EN ISO 2507-3:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
4/18/2018 - PDF - Spanish -
Learn More€49.00 -
UNE-EN ISO 2507-2:2018
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
4/18/2018 - PDF - Spanish -
Learn More€52.00 -
BS EN ISO 11298-1:2018
Plastics piping systems for renovation of underground water supply networks General
4/13/2018 - PDF - English -
Learn More€250.00 -
NF EN ISO 11298-1, T54-967-1 (04/2018)
Plastics piping systems for renovation of underground water supply networks - Part 1 : general
4/1/2018 - Paper - French -
Learn More€73.23 -
ASTM F1697-18 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
4/1/2018 - PDF - English -
Learn More€61.00 -
ASTM F2994-18(2022)
Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems
4/1/2018 - PDF - English -
Learn More€54.00 -
UNE-CEN/TR 17179:2018
Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for underground installation (Endorsed by Asociación Española de Normalización in April of 2018.)
4/1/2018 - PDF - English -
Learn More€65.00 -
NF EN ISO 11297-1, P16-378-1 (04/2018)
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1 : general
4/1/2018 - Paper - French -
Learn More€73.23 -
ASTM F2994-18(2022) + Redline
Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems
4/1/2018 - PDF - English -
Learn More€65.00 -
NF EN 13476-1, P16-353-1 (04/2018)
Plastic piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1 : general requirements and performance characteristics - Systèmes de canalisations en plastiques pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisation à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 1 : Exigences générales et
4/1/2018 - Paper - French -
Learn More€83.85 -
ASTM F1697-18
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
4/1/2018 - PDF - English -
Learn More€51.00 -
ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 2: Replacement off the line by horizontal directional drilling and impact moling
3/28/2018 - Paper - English -
Learn More€148.00 -
ISO 21225-2:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 2: Replacement off the line by horizontal directional drilling and impact moling
3/28/2018 - Paper - French -
Learn More€148.00 -
ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 1: Replacement on the line by pipe bursting and pipe extraction
3/28/2018 - Paper - English -
Learn More€110.00 -
ISO 21225-1:2018
Plastics piping systems for the trenchless replacement of underground pipeline networks
Part 1: Replacement on the line by pipe bursting and pipe extraction
3/28/2018 - Paper - French -
Learn More€110.00 -
NBN EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
3/23/2018 - PDF - French -
Learn More€58.00 -
NBN EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
3/23/2018 - PDF - English -
Learn More€58.00 -
NBN EN ISO 11298-2:2018
Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
3/23/2018 - PDF - French -
Learn More€58.00 -
NBN EN ISO 11296-2:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
3/23/2018 - PDF - English -
Learn More€58.00 -
NBN EN ISO 11296-4:2018
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
3/23/2018 - PDF - English -
Learn More€163.00 -
NBN EN ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
3/23/2018 - PDF - German -
Learn More€58.00