23.040.20 : Plastics pipes
-
ASTM F441/F441M-23 + Redline
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
2/1/2023 - PDF - English - ASTM
Learn More€65.00 -
ASTM F442/F442M-23
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
2/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F442/F442M-23 + Redline
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
2/1/2023 - PDF - English - ASTM
Learn More€65.00 -
BS EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
1/25/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
1/25/2023 - PDF - English - BSI
Learn More€180.00 -
23/30427624 DC:2023
BS ISO 16422-1. Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 1. General
1/19/2023 - PDF - English - BSI
Learn More€24.00 -
23/30427627 DC:2023
BS ISO 16422-2 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 2:
1/19/2023 - PDF - English - BSI
Learn More€24.00 -
23/30427632 DC:2023
BS ISO 16422-5. Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 5. Fitness purpose system
1/19/2023 - PDF - English - BSI
Learn More€24.00 -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
1/18/2023 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
1/18/2023 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
1/18/2023 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
1/18/2023 - PDF - English - AENOR
Learn More€55.20 -
NBN EN ISO 13266:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)
1/15/2023 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage (ISO 13267:2022)
1/15/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 13266:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Widerstandsfähigkeit gegen Belastungen der Oberfläche und Verkehrslasten (ISO 13266:2022)
1/15/2023 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Böden von Kontroll- und Einsteigschächten aus Thermoplasten - Prüfverfahren für die Widerstandsfähigkeit gegen Einbeulen (ISO 13267:2022)
1/15/2023 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
1/15/2023 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
1/15/2023 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire (ISO 13268:2022)
1/14/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Ringsteifigkeit (ISO 13268:2022)
1/14/2023 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
1/14/2023 - PDF - English - NBN
Learn More€58.00 -
NF EN ISO 13266, P16-367 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation
1/1/2023 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 13267, P16-368 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage
1/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
NF EN ISO 13268, P16-369 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire
1/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
ASTM D2992-22
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
12/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM D2992-22 + Redline
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
12/1/2022 - PDF - English - ASTM
Learn More€65.00 -
DIN EN 17176-2:2022-12
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes, German version EN 17176-2:2019+A1:2022.
12/1/2022 - PDF - German - DIN
Learn More€99.35 -
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
11/16/2022 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
11/16/2022 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 13844:2022
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
11/16/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 13844:2022
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
11/16/2022 - PDF - English - AENOR
Learn More€69.60 -
BS EN ISO 13844:2022 + Redline
Tracked Changes. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
11/15/2022 - PDF - English - BSI
Learn More€235.00 -
ASTM F1743-22
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
11/15/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1743-22 + Redline
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
11/15/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM F1741-22
Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
11/15/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1741-22 + Redline
Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
11/15/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM F1867-22
Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
11/15/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1867-22 + Redline
Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
11/15/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM F2019-22
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
11/15/2022 - PDF - English - ASTM
Learn More€60.00 -
ASTM F2019-22 + Redline
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
11/15/2022 - PDF - English - ASTM
Learn More€72.00 -
ASTM F1962-22
Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
11/15/2022 - PDF - English - ASTM
Learn More€60.00 -
ASTM F1962-22 + Redline
Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
11/15/2022 - PDF - English - ASTM
Learn More€72.00 -
BS EN ISO 15874-2:2013+A2:2022
Plastics piping systems for hot and cold water installations. Polypropylene (PP) Pipes
11/2/2022 - PDF - English - BSI
Learn More€250.00 -
ASTM D2239-22
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM D2239-22 + Redline
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM D3035-22
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM D3035-22 + Redline
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM D2737-22
Standard Specification for Polyethylene (PE) Plastic Tubing
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM D2737-22 + Redline
Standard Specification for Polyethylene (PE) Plastic Tubing
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM F1412-22
Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1412-22 + Redline
Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
DIN EN ISO 15874-2:2022-11
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013 + Amd.1:2018 + Amd.2:2022), German and English version EN ISO 15874-2:2013 + A1:2018 + A2:2022
11/1/2022 - PDF - English, German - DIN
Learn More€131.96 -
PD CEN ISO/TS 23818-2:2022
Assessment of conformity plastics piping systems for the rehabilitation existing pipelines Resin-fibre composite (RFC) material
10/31/2022 - PDF - English - BSI
Learn More€293.00 -
PD CEN ISO/TS 23818-3:2022
Assessment of conformity plastics piping systems for the rehabilitation existing pipelines Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material
10/31/2022 - PDF - English - BSI
Learn More€293.00 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - English - AENOR
Learn More€88.80 -
BS EN ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with a rigidly anchored plastics inner layer
10/17/2022 - PDF - English - BSI
Learn More€293.00 -
NBN EN 17176-2:2019+A1:2022
Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
10/13/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN 17176-2:2019+A1:2022
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für erdverlegte und nicht erdverlegte Entwässerungs-, Abwasser- und Bewässerungsdruckleitungen - Orientiertes weichmacherfreies Polyvinylchlorid (PVC-O) - Teil 2: Rohre - Änderung 1
10/13/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 9: Tubage par coffrage plastique interne rigidement ancré (ISO 11296-9:2022)
10/13/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) - Teil 9: Lining mit einer fest verankerten Kunststoffauskleidung (ISO 11296-9:2022)
10/13/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN 17176-2:2019+A1:2022
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
10/13/2022 - PDF - English - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
10/13/2022 - PDF - English - NBN
Learn More€142.00 -
UNE-CEN/TS 14541-2:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 2: Recommendations for relevant characteristics (Endorsed by Asociación Española de Normalización in July of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€65.00 -
UNE-CEN ISO/TS 23818-2:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-CEN ISO/TS 23818-3:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material (ISO/TS 23818-3:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€68.00 -
UNE-CEN ISO/TS 23818-1:2020
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 1: Polyethylene (PE) material (ISO/TS 23818-1:2020) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€95.00 -
NF EN ISO 11296-9, P16-296-9 (10/2022)
Plastics piping systems for the renovation of underground non-pressure drainage and sewerage networks - Part 9 : Lining with a rigidly anchored plastics inner layer
10/1/2022 - Paper - French - AFNOR
Learn More€99.33 -
NF EN 17176-2+A1, T54-968-2 (10/2022)
Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
10/1/2022 - Paper - French - AFNOR
Learn More€86.67 -
NF EN 17176-2/IN1, T54-968-2/IN1 (10/2022)
Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
10/1/2022 - Paper - French - AFNOR
Learn More€43.50 -
ASTM D2949-22
Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
10/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM D2949-22 + Redline
Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
10/1/2022 - PDF - English - ASTM
Learn More€65.00 -
DIN EN ISO 15874-1:2022-10
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013 + Amd 1:2022), German and English version EN ISO 15874-1:2013 + A1:2022
10/1/2022 - PDF - English, German - DIN
Learn More€85.79 -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€69.60 -
ASTM D4396-22
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
9/1/2022 - PDF - English - ASTM
Learn More€46.00 -
ASTM D4396-22 + Redline
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
9/1/2022 - PDF - English - ASTM
Learn More€53.00 -
ASTM F3541-22
Standard Practice for Sectional Repair of Existing Gravity Flow, Non-Pressure Pipelines and Conduits by Pushed or Pulled-In-Place Installation of Cured-In-Place Thermosetting Resin Pipe (CIPP)
9/1/2022 - PDF - English - ASTM
Learn More€60.00 -
ASTM F3541-22 + Redline
Standard Practice for Sectional Repair of Existing Gravity Flow, Non-Pressure Pipelines and Conduits by Pushed or Pulled-In-Place Installation of Cured-In-Place Thermosetting Resin Pipe (CIPP)
9/1/2022 - PDF - English - ASTM
Learn More€72.00 -
DIN EN ISO 13479:2022-09
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022), German version EN ISO 13479:2022
9/1/2022 - PDF - German - DIN
Learn More€85.79 -
BS EN ISO 15874-1:2013+A1:2022
Plastics piping systems for hot and cold water installations. Polypropylene (PP) General
8/31/2022 - PDF - English - BSI
Learn More€180.00 -
ASTM F1216-22
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
8/15/2022 - PDF - English - ASTM
Learn More€51.00 -
ASTM F1216-22 + Redline
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
8/15/2022 - PDF - English - ASTM
Learn More€61.00 -
CEN ISO/TS 23818-3:2022
Konformitätsbewertung von Kunststoffrohrleitungssystemen zur Sanierung von bestehenden Rohrleitungen - Teil 3: Weichmacherfreies Polyvinylchlorid (PVC U) (ISO/TS 23818 3:2021)
8/4/2022 - PDF - German - NBN
Learn More€121.00 -
CEN ISO/TS 23818-2:2022
Konformitätsbewertung von Kunststoffrohrleitungssystemen zur Sanierung von bestehenden Rohrleitungen - Teil 2: Harz-Faser Verbundwerkstoff (RCF) (ISO/TS 23818 2:2021)
8/4/2022 - PDF - German - NBN
Learn More€142.00 -
CEN ISO/TS 23818-3:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material (ISO/TS 23818-3:2021)
8/4/2022 - PDF - English - NBN
Learn More€121.00 -
CEN ISO/TS 23818-2:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021)
8/4/2022 - PDF - English - NBN
Learn More€142.00 -
BS EN ISO 13479:2022
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
7/31/2022 - PDF - English - BSI
Learn More€250.00 -
22/30447027 DC:2022
BS ISO 10468. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the ring creep properties under wet or dry conditions
7/27/2022 - PDF - English - BSI
Learn More€24.00 -
UNE 53929:2022
Plastics. Rehabilitation of supply and sewerage pipes with continuous cured tubes in situ (CIPP). Design, calculation and installation
7/20/2022 - PDF - Spanish - AENOR
Learn More€93.00 -
NBN EN ISO 15874-2:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
7/2/2022 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15874-1:2013/A1:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
7/2/2022 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15874-2:2013/A2:2022
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen (PP) - Teil 2: Rohre - Änderung 2: Kerbschlagzähigkeitsprüfung (ISO 15874-2:2013/Amd 2:2022)
7/2/2022 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15874-1:2013/A1:2022
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen (PP) - Teil 1: Allgemeines - Änderung 1: Kerbschlagzähigkeitsprüfung (ISO 15874-1:2013/Amd 1:2022)
7/2/2022 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15874-2:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
7/2/2022 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 15874-1:2013/A1:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
7/2/2022 - PDF - English - NBN
Learn More€20.00 -
ASTM F409-22
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
7/1/2022 - PDF - English - ASTM
Learn More€57.00 -
ASTM F409-22 + Redline
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
7/1/2022 - PDF - English - ASTM
Learn More€68.00 -
ASTM D2122-22
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
7/1/2022 - PDF - English - ASTM
Learn More€51.00 -
ASTM D2122-22 + Redline
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
7/1/2022 - PDF - English - ASTM
Learn More€61.00 -
DIN CEN/TS 17176-3:2022-07
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings, German version CEN/TS 17176-3:2022
7/1/2022 - PDF - German - DIN
Learn More€68.60 -
PD CEN/TS 17176-3:2022
Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fittings
6/30/2022 - PDF - English - BSI
Learn More€250.00 -
22/30414914 DC:2022
BS ISO 9854-2. Thermoplastics pipes for the transport of fluids. Determination Charpy impact properties Part 2. Test conditions various materials
6/29/2022 - PDF - English - BSI
Learn More€24.00 -
NBN EN ISO 13479:2022
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
6/18/2022 - PDF - French - NBN
Learn More€121.00 -
NBN EN ISO 13479:2022
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
6/18/2022 - PDF - English - NBN
Learn More€121.00 -
NBN EN ISO 13479:2022
Rohre aus Polyolefinen für den Transport von Fluiden - Bestimmung des Widerstandes gegen Rissfortpflanzung - Prüfverfahren für langsames Risswachstum an gekerbten Rohren (Kerbprüfung) (ISO 13479:2022)
6/18/2022 - PDF - German - NBN
Learn More€121.00 -
NF EN ISO 13479, T54-909 (06/2022)
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
6/1/2022 - Paper - French - AFNOR
Learn More€75.67 -
NF EN ISO 15874-1/A1, T54-938-1/A1 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : General - Amendment 1 : Impact test (ISO 15874-1:2013/DAM 1:2021)
6/1/2022 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 15874-2/A2, T54-938-2/A2 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : Pipes - Amendement 2 : Impact test (ISO 15874-2:2013/DAM 2:2021)
6/1/2022 - Paper - French - AFNOR
Learn More€48.00 -
AD 2000-Merkblatt HP 110 R:2022-06
Manufacture and testing of pressure vessels - Construction regulations - Piping made of glass reinforced thermosetting plastics (GRP) with and without liner
6/1/2022 - PDF - German - VDTUV
Learn More€17.53 -
AD 2000-Merkblatt HP 110 R:2022-06
Manufacture and testing of pressure vessels - Construction regulations - Piping made of glass reinforced thermosetting plastics (GRP) with and without liner
6/1/2022 - PDF - English - VDTUV
Learn More€25.38 -
AD 2000-Merkblatt HP 120 R:2022-06
Manufacture and testing of pressure vessels - Construction regulations - Thermoplastic piping
6/1/2022 - PDF - German - VDTUV
Learn More€17.53 -
AD 2000-Merkblatt HP 120 R:2022-06
Manufacture and testing of pressure vessels - Construction regulations - Thermoplastic piping
6/1/2022 - PDF - English - VDTUV
Learn More€25.38 -
DIN EN ISO 13844:2022-06
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation (ISO 13844:2022), German and English version EN ISO 13844:2022
6/1/2022 - PDF - English, German - DIN
Learn More€65.89 -
BS EN ISO 13844:2022
Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
5/31/2022 - PDF - English - BSI
Learn More€180.00 -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
5/25/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
5/25/2022 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
5/25/2022 - PDF - Spanish - AENOR
Learn More€96.00 -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
5/25/2022 - PDF - English - AENOR
Learn More€115.20 -
UNE-EN 1555-2:2022
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
5/11/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 1555-2:2022
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
5/11/2022 - PDF - English - AENOR
Learn More€88.80 -
NF EN 14541-1, P16-373-1 (05/2022)
Tubes et raccords en plastique - Utilisation de recyclats thermoplastiques - Partie 1 : vocabulaire
5/1/2022 - Paper - French - AFNOR
Learn More€48.00 -
UNE-EN 1329-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
4/13/2022 - PDF - Spanish - AENOR
Learn More€90.00 -
UNE-EN 1329-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
4/13/2022 - PDF - English - AENOR
Learn More€108.00 -
CEN/TS 17176-3:2022
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
4/9/2022 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 17176-3:2022
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
4/9/2022 - PDF - English - NBN
Learn More€121.00 -
ASTM F3564-22
Standard Practice for Determining Allowable Tensile Load for Polyamide-12 (PA12) Gas Pipe During Pull-In Installation
4/1/2022 - PDF - English - ASTM
Learn More€48.00 -
ASTM F3564-22 + Redline
Standard Practice for Determining Allowable Tensile Load for Polyamide-12 (PA12) Gas Pipe During Pull-In Installation
4/1/2022 - PDF - English - ASTM
Learn More€57.00 -
ASTM F3371-22
Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications
4/1/2022 - PDF - English - ASTM
Learn More€51.00 -
ASTM F3371-22 + Redline
Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications
4/1/2022 - PDF - English - ASTM
Learn More€61.00 -
DIN EN ISO 11298-4:2022-04
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021), German version EN ISO 11298-4:2021.
4/1/2022 - PDF - German - DIN
Learn More€126.26 -
22/30385843 DC:2022
BS ISO 23627. Plastics piping systems for non-pressure underground drainage and sewerage. Steel-Reinforced-Polyethylene (SRPE). Corrugated Pipes and fittings
3/30/2022 - PDF - English - BSI
Learn More€24.00 -
UNE-EN ISO 23856:2022
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
3/23/2022 - PDF - Spanish - AENOR
Learn More€124.00 -
UNE-EN ISO 23856:2022
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
3/23/2022 - PDF - English - AENOR
Learn More€148.80 -
UNE-EN 13598-1:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers
3/9/2022 - PDF - Spanish - AENOR
Learn More€77.00 -
UNE-EN 13598-1:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers
3/9/2022 - PDF - English - AENOR
Learn More€92.40 -
UNE-EN 13598-2:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
3/9/2022 - PDF - Spanish - AENOR
Learn More€76.00 -
UNE-EN 13598-2:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
3/9/2022 - PDF - English - AENOR
Learn More€91.20 -
UNE-EN ISO 13259:2022
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
3/9/2022 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 13259:2022
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
3/9/2022 - PDF - English - AENOR
Learn More€75.60 -
ASTM F3378/F3378M-22
Standard Specification for Crosslinkable Polyethylene (CX-PE) Pipe
3/1/2022 - PDF - English - ASTM
Learn More€60.00 -
ASTM F3378/F3378M-22 + Redline
Standard Specification for Crosslinkable Polyethylene (CX-PE) Pipe
3/1/2022 - PDF - English - ASTM
Learn More€72.00 -
NBN EN ISO 13844:2022
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
2/25/2022 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 13844:2022
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
2/25/2022 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 13844:2022
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
2/25/2022 - PDF - English - NBN
Learn More€58.00 -
NF EN ISO 13844, T54-923 (02/2022)
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation
2/1/2022 - Paper - French - AFNOR
Learn More€48.00 -
ASTM F3123-22
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
2/1/2022 - PDF - English - ASTM
Learn More€57.00 -
ASTM F3123-22 + Redline
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
2/1/2022 - PDF - English - ASTM
Learn More€68.00 -
ASTM F3534/F3534M-22
Standard Specification for MRS-Rated Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pressure Pipe for Gas Distribution Applications
2/1/2022 - PDF - English - ASTM
Learn More€60.00 -
ASTM F3534/F3534M-22 + Redline
Standard Specification for MRS-Rated Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pressure Pipe for Gas Distribution Applications
2/1/2022 - PDF - English - ASTM
Learn More€72.00 -
ASTM F2435-22
Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
2/1/2022 - PDF - English - ASTM
Learn More€51.00 -
ASTM F2435-22 + Redline
Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
2/1/2022 - PDF - English - ASTM
Learn More€61.00 -
ASTM F2905/F2905M-22
Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications
1/1/2022 - PDF - English - ASTM
Learn More€51.00 -
ASTM F2905/F2905M-22 + Redline
Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications
1/1/2022 - PDF - English - ASTM
Learn More€61.00 -
ASTM F2023-21
Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
12/15/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM F2023-21 + Redline
Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
12/15/2021 - PDF - English - ASTM
Learn More€61.00 -
ASTM F2487-21
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
12/1/2021 - PDF - English - ASTM
Learn More€46.00 -
ASTM F2487-21 + Redline
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
12/1/2021 - PDF - English - ASTM
Learn More€53.00 -
ASTM D3212-21
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
12/1/2021 - PDF - English - ASTM
Learn More€46.00 -
ASTM D3212-21 + Redline
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
12/1/2021 - PDF - English - ASTM
Learn More€53.00 -
DIN EN 1555-2:2021-12
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes, German version EN 1555-2:2021.
12/1/2021 - PDF - German - DIN
Learn More€92.62 -
DVS 2205-1 Beiblatt 1:2021-12
Calculation of tanks and apparatus made of thermoplastics - Characteristic values of the polyethylene material group
12/1/2021 - PDF - German - DVS
Learn More€56.95 -
21/30442065 DC:2021
BS EN 17176-2 AMD1. Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Part 2. Pipes
11/18/2021 - PDF - English - BSI
Learn More€24.00 -
UNE-EN 1519-1:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
11/10/2021 - PDF - Spanish - AENOR
Learn More€83.00 -
UNE-EN 1519-1:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
11/10/2021 - PDF - English - AENOR
Learn More€99.60 -
BS ISO 10952:2021 + Redline
Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack for the inside of a section in a deflected condition
11/9/2021 - PDF - English - BSI
Learn More€235.00 -
21/30441043 DC:2021
BS EN 16904. Plastics piping systems. Environmental product declarations. Product Category rules complementary to EN 15804, for plastic piping systems inside buildings
11/4/2021 - PDF - English - BSI
Learn More€24.00 -
21/30441046 DC:2021
BS EN 16903. Plastics piping systems. Environmental product declarations. Product Category Rules complementary to EN 15804, for buried plastics piping systems
11/4/2021 - PDF - English - BSI
Learn More€24.00 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - English - AENOR
Learn More€62.40 -
ASTM D2729-21
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
11/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM D2729-21 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
11/1/2021 - PDF - English - ASTM
Learn More€61.00 -
ASTM D2661-21
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
11/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM D2661-21 + Redline
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
11/1/2021 - PDF - English - ASTM
Learn More€61.00 -
ASTM F1057-21
Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
11/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM F1057-21 + Redline
Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
11/1/2021 - PDF - English - ASTM
Learn More€61.00 -
ASTM F3508-21a
Standard Guide for In-Situ Pipeline Renovation As Dual-Wall Composite Pipeline by Push/Pull Installation of Compressed-Fit Shape-Memory-Polymer Tubular (SMPT)
11/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM F3508-21a + Redline
Standard Guide for In-Situ Pipeline Renovation As Dual-Wall Composite Pipeline by Push/Pull Installation of Compressed-Fit Shape-Memory-Polymer Tubular (SMPT)
11/1/2021 - PDF - English - ASTM
Learn More€61.00 -
ASTM F679-21
Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
11/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM F679-21 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
11/1/2021 - PDF - English - ASTM
Learn More€61.00 -
DIN EN ISO 11296-4:2021-11
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018 + Amd 1:2021), German version EN ISO 11296-4:2018 + A1:2021
11/1/2021 - PDF - German - DIN
Learn More€131.96 -
UNE-EN ISO 11299-2:2021
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
10/27/2021 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 11299-2:2021
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
10/27/2021 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 11299-1:2021
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
10/27/2021 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 11299-1:2021
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
10/27/2021 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 11299-3:2021
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
10/27/2021 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN ISO 11299-3:2021
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
10/27/2021 - PDF - English - AENOR
Learn More€85.20 -
BS ISO 7432:2021 + Redline
Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
10/4/2021 - PDF - English - BSI
Learn More€326.00 -
NF EN ISO 15877-3/A2, T54-014-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3 : Fittings - Amendment 2
10/1/2021 - Paper - French - AFNOR
Learn More€75.67 -
NF EN ISO 15874-3/A2, T54-938-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : Fittings - Amendment 2 (ISO 15874-3:2013/DAM 2:2020)
10/1/2021 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 15875-3/A2, T54-943-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3 : Fittings - Amendment 2 (ISO 15875-3:2003/DAM 2:2020)
10/1/2021 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 22391-3/A2, T54-982-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : Fittings - Amendment 2
10/1/2021 - Paper - French - AFNOR
Learn More€60.67 -
NF EN ISO 15876-3/A2, T54-944-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : Fittings - Amendment 2 (ISO 15876-3:2017/DAM 2:2020)
10/1/2021 - Paper - French - AFNOR
Learn More€43.50 -
UNE-EN ISO 15875-2:2004/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More€49.00
