23.040.20 : Plastics pipes
-
UNE-CEN/TS 1566-2:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity (Endorsed by Asociación Española de Normalización in December of 2023.)
4/24/2024 - PDF - English -
Learn More€70.00 -
Adjunct to F1734 Practice for Qualification of a Combination of Squeeze Tool
Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
4/24/2024 - Paper - English -
Learn More€76.85 -
UNE-EN 12201-1:2024
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General (Endorsed by Asociación Española de Normalización in March of 2024.)
4/24/2024 - PDF - English -
Learn More€71.00 -
€22.99
-
ISO 3514:1976 (R2022)
Chlorinated polyvinyl chloride (CPVC) pipes and fittings
Specification and determination of density
2/1/1976 - Paper - French -
Learn More€48.00 -
ISO 3514:1976 (R2022)
Chlorinated polyvinyl chloride (CPVC) pipes and fittings
Specification and determination of density
2/1/1976 - Paper - English -
Learn More€48.00 -
ISO 3114:1977 (R2023)
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply
Extractability of lead and tin
3/1/1977 - Paper - French -
Learn More€48.00 -
ISO 4059:1978 (R2020)
Polyethylene (PE) pipes
Pressure drop in mechanical pipe-jointing systems
9/1/1978 - Paper - English -
Learn More€48.00 -
ISO 4059:1978 (R2020)
Polyethylene (PE) pipes
Pressure drop in mechanical pipe-jointing systems
9/1/1978 - Paper - French -
Learn More€48.00 -
ISO 4439:1979 (R2020)
Unplasticized polyvinyl chloride (PVC) pipes and fittings
Determination and specification of density
7/1/1979 - Paper - English -
Learn More€48.00 -
ISO 4439:1979 (R2020)
Unplasticized polyvinyl chloride (PVC) pipes and fittings
Determination and specification of density
7/1/1979 - Paper - French -
Learn More€48.00 -
DVGW W 320:1981-09
Manufacture, quality assurance and testing of pipes of PVC rigid (polyvinyl chloride rigid), HDPE (polyethylene rigid) and LDPE (polyethylene soft) for water supply and requirements on pipe couplings and pipeline parts
9/1/1981 - PDF - German -
Learn More€67.95 -
DIN 16871:1982-02
Centrifugally cast glass fibre reinforced epoxy resin (EP-GF) pipes, Dimensions
2/1/1982 - PDF - German -
Learn More€32.34 -
DIN 16871:1982-02
Centrifugally cast glass fibre reinforced epoxy resin (EP-GF) pipes, Dimensions
2/1/1982 - PDF - English -
Learn More€40.56 -
DIN 16965-1:1982-07
Wound glass fibre reinforced polyester resin (UP-GF), pipes, Type A pipes, dimensions
7/1/1982 - PDF - German -
Learn More€32.34 -
DIN 16965-4:1982-07
Wound glass fibre reinforced polyester resin (UP-GF), pipes, Type D pipes, dimensions
7/1/1982 - PDF - English -
Learn More€40.56 -
DIN 16867:1982-07
Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines, Technical delivery conditions
7/1/1982 - PDF - German -
Learn More€45.98 -
DIN 16965-2:1982-07
Wound glass fibre reinforced polyester resin (UP-GF), pipes, Type B pipes, dimensions
7/1/1982 - PDF - English -
Learn More€40.56 -
DIN 16965-1:1982-07
Wound glass fibre reinforced polyester resin (UP-GF), pipes, Type A pipes, dimensions
7/1/1982 - PDF - English -
Learn More€40.56 -
DIN 16965-5:1982-07
Wound glass fibre reinforced polyester resin (UP-GF), pipes, Type E pipes, dimensions
7/1/1982 - PDF - German -
Learn More€39.35 -
DIN 16867:1982-07
Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines, Technical delivery conditions
7/1/1982 - PDF - English -
Learn More€57.57 -
DIN 16965-4:1982-07
Wound glass fibre reinforced polyester resin (UP-GF), pipes, Type D pipes, dimensions
7/1/1982 - PDF - German -
Learn More€32.34 -
DIN 16965-2:1982-07
Wound glass fibre reinforced polyester resin (UP-GF), pipes, Type B pipes, dimensions
7/1/1982 - PDF - German -
Learn More€32.34 -
DIN 16965-5:1982-07
Wound glass fibre reinforced polyester resin (UP-GF), pipes, Type E pipes, dimensions
7/1/1982 - PDF - English -
Learn More€49.16 -
ISO 7246:1984 (R2021)
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA)
General specification for moulding and extrusion materials
11/1/1984 - Paper - English -
Learn More€48.00 -
ISO 7245:1984 (R2021)
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS)
General specification for moulding and extrusion materials
11/1/1984 - Paper - French -
Learn More€48.00 -
ISO 7246:1984 (R2021)
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA)
General specification for moulding and extrusion materials
11/1/1984 - Paper - French -
Learn More€48.00 -
ISO 7245:1984 (R2021)
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS)
General specification for moulding and extrusion materials
11/1/1984 - Paper - English -
Learn More€48.00 -
€49.16
-
€39.35
-
DIN 16964:1988-11
Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing
11/1/1988 - PDF - German -
Learn More€32.34 -
DIN 16964:1988-11
Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing
11/1/1988 - PDF - English -
Learn More€40.56 -
ISO 265-1:1988 (R2021)
Pipes and fittings of plastics materials
Fittings for domestic and industrial waste pipes
12/29/1988 - Paper - French -
Learn More€148.00 -
ISO 265-1:1988 (R2021)
Pipes and fittings of plastics materials
Fittings for domestic and industrial waste pipes
12/29/1988 - Paper - English -
Learn More€148.00 -
NBN T 42-003:1989
Thermoplastic pipes - General definitions, nominal values and tolerances
2/14/1989 - PDF - Dutch -
Learn More€58.00 -
NBN T 42-003:1989
Thermoplastic pipes - General definitions, nominal values and tolerances
2/14/1989 - PDF - French -
Learn More€58.00 -
BS 2782-11:Method 1108A:1989
Methods of testing plastics. Thermoplastics pipes, fittings and valves True impact rate (TIR) boundaries pipes
9/29/1989 - PDF - English -
Learn More€151.00 -
BS 2782-11:Method 1109A:1989
Methods of testing plastics. Thermoplastics pipes, fittings and valves Resistance to environmental stress cracking polyethylene pipes for non-pressure applications
10/31/1989 - PDF - English -
Learn More€151.00 -
DIN 16887:1990-07
Determination of the long-term hydrostatic pressure resistance of thermoplastics pipes
7/1/1990 - PDF - German -
Learn More€32.34 -
DIN 16887:1990-07
Determination of the long-term hydrostatic pressure resistance of thermoplastics pipes
7/1/1990 - PDF - English -
Learn More€40.56 -
NF T54-086 (09/1990) (R2010)
Plastics. Unplasticized poly(vinylchloride) (PVC-U) for underground irrigation. Specifications. - Plastiques
9/1/1990 - Paper - French -
Learn More€86.67 -
ASTM F1365-91(2023) + Redline
Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
1/1/1991 - PDF - English -
Learn More€57.00 -
ASTM F1365-91(2023)
Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
1/1/1991 - PDF - English -
Learn More€48.00 -
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
ISO 8283-4:1992 (R2019)
Plastics pipes and fittings
Dimensions of sockets and spigots for discharge systems inside buildings
12/3/1992 - Paper - English -
Learn More€72.00 -
ISO 8283-4:1992 (R2019)
Plastics pipes and fittings
Dimensions of sockets and spigots for discharge systems inside buildings
12/3/1992 - Paper - French -
Learn More€72.00 -
ISO/TR 10501:1993 (R2022)
Thermoplastics pipes for the transport of liquids under pressure
Calculation of head losses
12/23/1993 - Paper - English -
Learn More€48.00 -
ISO/TR 10501:1993 (R2022)
Thermoplastics pipes for the transport of liquids under pressure
Calculation of head losses
12/23/1993 - Paper - French -
Learn More€48.00 -
DIN EN 705:1994-08
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994
8/1/1994 - PDF - German -
Learn More€79.72 -
DIN EN 705:1994-08
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994
8/1/1994 - PDF - English -
Learn More€99.44 -
NBN EN 705:1994
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
8/26/1994 - PDF - English -
Learn More€37.00 -
NBN EN 705:1994
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
8/26/1994 - PDF - French -
Learn More€37.00 -
NBN EN 705:1994
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
8/26/1994 - PDF - Dutch -
Learn More€37.00 -
NBN EN 705:1994
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
8/26/1994 - PDF - German -
Learn More€37.00 -
NF EN 705, T57-211 (09/1994) (R1999)
Plastics piping sytems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Methods for regression analysis and their use. - Systèmes de canalisations plastiques
9/1/1994 - Paper - French -
Learn More€119.00 -
ISO 3127:1994 (R2022)
Thermoplastics pipes
Determination of resistance to external blows
12/1/1994 - Paper - English -
Learn More€72.00 -
ISO 3127:1994 (R2022)
Thermoplastics pipes
Determination of resistance to external blows
12/1/1994 - Paper - French -
Learn More€72.00 -
ISO 11173:1994 (R2022)
Thermoplastics pipes
Determination of resistance to external blows
12/1/1994 - Paper - English -
Learn More€48.00 -
ISO 11173:1994 (R2022)
Thermoplastics pipes
Determination of resistance to external blows
12/1/1994 - Paper - French -
Learn More€48.00 -
ISO 2507-2:1995
Thermoplastics pipes and fittings
Vicat softening temperature
2/2/1995 - Paper - English -
Learn More€48.00 -
€48.00
-
ISO 2507-3:1995 (R2017)
Thermoplastics pipes and fittings
Vicat softening temperature
2/2/1995 - Paper - English -
Learn More€48.00 -
€48.00
-
ISO 2507-1:1995
Thermoplastics pipes and fittings
Vicat softening temperature
2/2/1995 - Paper - English -
Learn More€48.00 -
€48.00
-
NF T54-020 (04/1995) (R2010)
Plastics. Pipes made of light weight unplasticized polyvinyl chloride. Cold flaring test. - Plastiques
4/1/1995 - Paper - French -
Learn More€60.67 -
BS EN 637:1995
Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method
7/15/1995 - PDF - English -
Learn More€151.00 -
BS EN 761:1995
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under dry conditions
7/15/1995 - PDF - English -
Learn More€151.00 -
UNE-EN 705:1995 (R2016)
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
9/20/1995 - PDF - Spanish -
Learn More€82.00 -
UNE-EN 705:1995 (R2016)
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
9/20/1995 - PDF - English -
Learn More€98.40 -
BS EN 705:1995
Plastics piping systems. Glass-reinforced thermosetting (GRP) pipes and fittings. Methods for regression analyses and their use
11/15/1995 - PDF - English -
Learn More€293.00 -
€48.00
-
€48.00
-
€0.00
-
ASTM F1588-96(2019)
Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
1/1/1996 - PDF - English -
Learn More€51.00 -
ASTM F1588-96(2019) + Redline
Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
1/1/1996 - PDF - English -
Learn More€61.00 -
DIN 74324-1:1996-02
Polyamide tubing for air braking systems - Requirements and testing
2/1/1996 - PDF - English -
Learn More€57.57 -
€59.63
-
€59.63
-
DIN 74324-1:1996-02
Air braking systems - Thermoplastic tubing - Part 1: Requirements and tests
2/1/1996 - PDF - German -
Learn More€45.98 -
UNE-EN 637:1996 (R2016)
Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method
3/24/1996 - PDF - English -
Learn More€46.80 -
UNE-EN 637:1996 (R2016)
Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method
3/24/1996 - PDF - Spanish -
Learn More€39.00 -
ISO 9896:1996 (R2022)
Plastics traps for discharge pipework systems inside buildings
General information
4/18/1996 - Paper - English -
Learn More€174.00 -
ISO 9896:1996 (R2022)
Plastics traps for discharge pipework systems inside buildings
General information
4/18/1996 - Paper - French -
Learn More€174.00 -
NBN EN 1120:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition
5/1/1996 - PDF - English -
Learn More€89.00 -
NBN EN 1120:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition
5/1/1996 - PDF - French -
Learn More€89.00 -
NBN EN 1120:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition
5/1/1996 - PDF - Dutch -
Learn More€89.00 -
NBN EN 1120:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition
5/1/1996 - PDF - German -
Learn More€89.00 -
DIN EN 1120:1996-07
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition; German version EN 1120:1996
7/1/1996 - PDF - German -
Learn More€45.98 -
DIN EN 1120:1996-07
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition; German version EN 1120:1996
7/1/1996 - PDF - English -
Learn More€57.57 -
UNE-EN 1055:1996
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
7/10/1996 - PDF - Spanish -
Learn More€53.00 -
UNE-EN 1055:1996
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
7/10/1996 - PDF - English -
Learn More€63.60 -
DIN EN 1229:1996-08
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure; German version EN 1229:1996
8/1/1996 - PDF - English -
Learn More€40.56 -
DIN EN 1228:1996-08
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996
8/1/1996 - PDF - English -
Learn More€49.16 -
DIN EN 1229:1996-08
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure; German version EN 1229:1996
8/1/1996 - PDF - German -
Learn More€32.34 -
DIN EN 1228:1996-08
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996
8/1/1996 - PDF - German -
Learn More€39.35 -
BS 2782-11:Method 1121H:1996
Methods of testing plastics. Thermoplastics pipes, fittings and valves pipes for the transport liquids under pressure. Calculation head losses
8/15/1996 - PDF - English -
Learn More€151.00 -
BS EN 1056:1996
Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering
9/15/1996 - PDF - English -
Learn More€151.00 -
BS EN 1120:1996
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack from the inside of a section in a deflected condition
9/15/1996 - PDF - English -
Learn More€151.00 -
NBN EN 1394:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
10/1/1996 - PDF - French -
Learn More€37.00 -
NBN EN 1393:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
10/1/1996 - PDF - German -
Learn More€37.00 -
NBN EN 1394:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
10/1/1996 - PDF - Dutch -
Learn More€37.00 -
NBN EN 1394:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
10/1/1996 - PDF - German -
Learn More€37.00 -
NBN EN 1393:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
10/1/1996 - PDF - English -
Learn More€37.00 -
NBN EN 1393:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
10/1/1996 - PDF - French -
Learn More€37.00 -
NBN EN 1394:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
10/1/1996 - PDF - English -
Learn More€37.00 -
NBN EN 1393:1996
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
10/1/1996 - PDF - Dutch -
Learn More€37.00 -
BS EN 852-1:1996
Plastics piping systems for the transport of water intended human consumption. Migration assessment Determination migration values plastics pipes
11/15/1996 - PDF - English -
Learn More€180.00 -
UNE-EN 1228:1996
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL SPECIFIC RING STIFFNESS.
11/24/1996 - PDF - Spanish -
Learn More€49.00 -
UNE-EN 1229:1996
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES AND FITTINGS. TEST METHODS TO PROVE THE LEAKTIGHTNESS OF THE WALL UNDER SHORT-TERM INTERNAL PRESSURE.
11/24/1996 - PDF - English -
Learn More€40.80 -
UNE-EN 1228:1996
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL SPECIFIC RING STIFFNESS.
11/24/1996 - PDF - English -
Learn More€58.80 -
UNE-EN 1229:1996
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES AND FITTINGS. TEST METHODS TO PROVE THE LEAKTIGHTNESS OF THE WALL UNDER SHORT-TERM INTERNAL PRESSURE.
11/24/1996 - PDF - Spanish -
Learn More€34.00 -
DIN EN 1394:1996-12
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996
12/1/1996 - PDF - German -
Learn More€59.63 -
DIN EN 1393:1996-12
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties; German version EN 1393:1996
12/1/1996 - PDF - German -
Learn More€52.90 -
DIN EN 1394:1996-12
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996
12/1/1996 - PDF - English -
Learn More€74.58 -
DIN EN 1393:1996-12
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties; German version EN 1393:1996
12/1/1996 - PDF - English -
Learn More€66.07 -
BS EN 1226:1996
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method to prove the resistance to initial ring deflection
12/15/1996 - PDF - English -
Learn More€151.00 -
ISO 161-2:1996 (R2019)
Thermoplastics pipes for the conveyance of fluids
Nominal outside diameters and nominal pressures
12/26/1996 - Paper - English -
Learn More€48.00 -
ISO 161-2:1996 (R2019)
Thermoplastics pipes for the conveyance of fluids
Nominal outside diameters and nominal pressures
12/26/1996 - Paper - French -
Learn More€48.00 -
ASTM F481-97(2019)
Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
1/1/1997 - PDF - English -
Learn More€46.00 -
ASTM F481-97(2019) + Redline
Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
1/1/1997 - PDF - English -
Learn More€53.00 -
BS EN 1229:1997
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the leaktightness of the wall under short-term internal pressure
1/15/1997 - PDF - English -
Learn More€151.00 -
UNE-EN 1393:1997
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIEPES. DETERMINATION OF INITIAL LONGITUDINAL TENSILE PROPERTIES.
3/24/1997 - PDF - English -
Learn More€72.00 -
UNE-EN 1394:1997
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE APPARENT INITIAL CIRCUMFERENTIAL TENSILE STRENGTH.
3/24/1997 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 1393:1997
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIEPES. DETERMINATION OF INITIAL LONGITUDINAL TENSILE PROPERTIES.
3/24/1997 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 1394:1997
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE APPARENT INITIAL CIRCUMFERENTIAL TENSILE STRENGTH.
3/24/1997 - PDF - English -
Learn More€81.60 -
NF EN 1716, T54-922 (04/1997)
Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee. - Systèmes de canalisations en plastiques
4/1/1997 - Paper - French -
Learn More€60.50 -
ISO 11922-2:1997 (R2019)
Thermoplastics pipes for the conveyance of fluids
Dimensions and tolerances
4/3/1997 - Paper - French -
Learn More€110.00 -
ISO 11922-2:1997 (R2019)
Thermoplastics pipes for the conveyance of fluids
Dimensions and tolerances
4/3/1997 - Paper - English -
Learn More€110.00 -
BS EN 1228:1997
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial specific ring stiffness
4/15/1997 - PDF - English -
Learn More€151.00 -
BS EN 1393:1997
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial longitudinal tensile properties
4/15/1997 - PDF - English -
Learn More€180.00 -
BS ISO 11922-2:1997
Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances Inch-based series
6/15/1997 - PDF - English -
Learn More€180.00 -
BS EN 1394:1997
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the apparent initial circumferential tensile strength
6/15/1997 - PDF - English -
Learn More€180.00 -
BS 2782-11:Method 1121C:1997
Methods of testing plastics. Thermoplastics pipes, fittings and valves pipes for the conveyance fluids. Nominal outside diameters nominal pressures. Inch-based series
6/15/1997 - PDF - English -
Learn More€151.00 -
BS EN 728:1997
Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time
7/15/1997 - PDF - English -
Learn More€151.00 -
DIN EN 12099:1997-08
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content; German version EN 12099:1997
8/1/1997 - PDF - German -
Learn More€32.34 -
DIN EN 12099:1997-08
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content; German version EN 12099:1997
8/1/1997 - PDF - English -
Learn More€40.56 -
€72.00
-
€72.00
-
NBN EN 12106:1997
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
10/10/1997 - PDF - German -
Learn More€37.00 -
NBN EN 12106:1997
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
10/10/1997 - PDF - English -
Learn More€37.00 -
NBN EN 12106:1997
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
10/10/1997 - PDF - French -
Learn More€37.00 -
NF EN 12100, T54-930 (11/1997)
Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports. - Systèmes de canalisations en plastiques
11/1/1997 - Paper - French -
Learn More€60.67 -
DIN EN 12118:1997-11
Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
11/1/1997 - PDF - English -
Learn More€40.56 -
DIN EN 12106:1997-11
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off; German version EN 12106:1997
11/1/1997 - PDF - English -
Learn More€40.56 -
DIN EN 12118:1997-11
Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
11/1/1997 - PDF - German -
Learn More€32.34 -
DIN EN 12106:1997-11
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off; German version EN 12106:1997
11/1/1997 - PDF - German -
Learn More€32.34 -
BS EN 12099:1997
Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content
12/15/1997 - PDF - English -
Learn More€151.00 -
BS EN 1638:1997
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure
12/15/1997 - PDF - English -
Learn More€151.00 -
€110.00
-
€72.00
-
€72.00
-
€110.00
-
€72.00
-
€110.00
-
€110.00
-
€72.00
-
BS EN 12106:1998
Plastics piping systems. Polyethylene (PE) pipes. Test method for the resistance to internal pressure after application of squeeze-off
2/15/1998 - PDF - English -
Learn More€151.00 -
UNE-EN 1394/AC:1998
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE APPARENT INITIAL CIRCUMFERENTIAL TENSILE STRENGTH.
2/25/1998 - PDF - Spanish -
Learn More€0.00 -
UNE-EN 1393/AC:1998
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL LONGITUDINAL TENSILE PROPERTIES.
2/25/1998 - PDF - Spanish -
Learn More€0.00 -
UNE-EN 1394/AC:1998
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE APPARENT INITIAL CIRCUMFERENTIAL TENSILE STRENGTH.
2/25/1998 - PDF - English -
Learn More€0.00 -
UNE-EN 1393/AC:1998
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL LONGITUDINAL TENSILE PROPERTIES.
2/25/1998 - PDF - English -
Learn More€0.00 -
BS ISO 4433-2:1997
Thermoplastics pipes. Resistance to liquid chemicals. Classification Polyolefin pipes
3/15/1998 - PDF - English -
Learn More€180.00 -
BS ISO 4433-1:1997
Thermoplastic pipes. Resistance to liquid chemicals. Classification Immersion test method
3/15/1998 - PDF - English -
Learn More€180.00 -
BS ISO 4433-3:1997
Thermoplastic pipes. Resistance to liquid chemicals. Classification Unplasticized poly(vinyl chloride) (PVC-U), high-impact (PVC-HI) and chlorinated (PVC-C) pipes
3/15/1998 - PDF - English -
Learn More€180.00 -
BS ISO 4433-4:1997
Thermoplastics pipes. Resistance to liquid chemicals. Classification Poly(vinylidene fluoride) (PVDF) pipes
3/15/1998 - PDF - English -
Learn More€151.00 -
BS EN 12118:1998
Plastics piping systems. Determination of moisture content in thermoplastics by coulometry
3/15/1998 - PDF - English -
Learn More€151.00 -
BS EN 1862:1998
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment
4/15/1998 - PDF - English -
Learn More€151.00 -
UNE-EN 12106:1998 (R2015)
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
5/7/1998 - PDF - Spanish -
Learn More€34.00 -
UNE-EN 12106:1998 (R2015)
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
5/7/1998 - PDF - English -
Learn More€40.80 -
ISO 13760:1998 (R2019)
Plastics pipes for the conveyance of fluids under pressure
Miner's rule
5/14/1998 - Paper - English -
Learn More€48.00 -
ISO 13760:1998 (R2019)
Plastics pipes for the conveyance of fluids under pressure
Miner's rule
5/14/1998 - Paper - French -
Learn More€48.00 -
DIN EN ISO 13760:1998-07
Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage (ISO 13760:1998); German version EN ISO 13760:1998
7/1/1998 - PDF - English -
Learn More€49.16 -
DIN EN ISO 13760:1998-07
Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage (ISO 13760:1998); German version EN ISO 13760:1998
7/1/1998 - PDF - German -
Learn More€39.35 -
€48.00
-
€48.00
-
DIN EN 1905:1999-02
Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
2/1/1999 - PDF - English -
Learn More€40.56 -
DIN EN 1905:1999-02
Plastics piping systems - Unplastized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content, German version EN 1905:1998
2/1/1999 - PDF - German -
Learn More€32.34 -
ISO 7511:1999 (R2022)
Plastics piping systems
Glass-reinforced thermosetting plastics (GRP) pipes and fittings
3/18/1999 - Paper - English -
Learn More€48.00 -
BS EN 1905:1999
Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content
7/15/1999 - PDF - English -
Learn More€151.00 -
UNE-EN ISO 13760:1999 (R2008)
PLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS UNDER PRESSURE. MINER'S RULE. CALCULATION METHOD FOR CUMULATIVE DAMAGE (ISO 13760:1998)
9/24/1999 - PDF - English -
Learn More€58.80 -
UNE-EN ISO 13760:1999 (R2008)
PLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS UNDER PRESSURE. MINER'S RULE. CALCULATION METHOD FOR CUMULATIVE DAMAGE (ISO 13760:1998)
9/24/1999 - PDF - Spanish -
Learn More€49.00 -
NBN EN 12324-2:1999
Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines
10/1/1999 - PDF - English -
Learn More€37.00 -
DIN EN 12324-2:1999-10
Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines
10/1/1999 - PDF - English -
Learn More€57.57 -
NBN EN 12324-2:1999
Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines
10/1/1999 - PDF - French -
Learn More€37.00 -
NBN EN 12324-2:1999
Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines
10/1/1999 - PDF - German -
Learn More€37.00 -
DIN EN 12324-2:1999-10
Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines, German version EN 12324-2:1999
10/1/1999 - PDF - German -
Learn More€45.98 -
BS EN 12324-2:1999
Irrigation techniques. Reel machine systems Specifications of polyethylene tubes for reel machines
11/15/1999 - PDF - English -
Learn More€151.00 -
DIN 19531-10:1999-12
Pipes and fittings made of unplasticized polyvinyl chloride (PVC-U) socket for waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations
12/1/1999 - PDF - German -
Learn More€52.90 -
DIN 19531-10:1999-12
Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for drainage systems inside buildings - Part 10: Fire behaviour, quality control and installation
12/1/1999 - PDF - English -
Learn More€66.07 -
UNE-EN 1905:1999 (R2015)
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
12/14/1999 - PDF - English -
Learn More€55.20 -
UNE-EN 1905:1999 (R2015)
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
12/14/1999 - PDF - Spanish -
Learn More€46.00 -
BS EN ISO 13760:2000
Plastics pipes for the conveyance of fluids under pressure. Miners rule. Calculation method for cumulative damage
4/15/2000 - PDF - English -
Learn More€151.00 -
UNE-EN 12324-2:2000 (R2018)
Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines
4/17/2000 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 12324-2:2000 (R2018)
Irrigation techniques - Reel machine systems - Part 2: Specifications of polyethylene tubes for reel machines
4/17/2000 - PDF - English -
Learn More€72.00