23.040.20 : Plastics pipes

Items 1 to 200 of 1758 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  • BS EN ISO 11296-4:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with cured-in-place pipes
    5/13/2020 - PDF - English - BSI
    Learn More
    €284.40

  • NF ISO 14743, E49-055 (05/2020)


    5/1/2020 - Paper - French - AFNOR
    Learn More
    €84.02

  • BS ISO 13953:2001+A1:2020

    Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
    4/28/2020 - PDF - English - BSI
    Learn More
    €130.35

  • ASTM F2968/F2968M-20a

    Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications
    4/1/2020 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F2968/F2968M-20a + Redline

    Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications
    4/1/2020 - PDF - English - ASTM
    Learn More
    €62.00

  • PR NF EN ISO 15875-3/A1, T54-943-3/A1PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €60.48

  • PR NF EN ISO 22391-3/A1, T54-982-3/A1PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €52.72

  • PR NF EN ISO 15877-2/A2, T54-014-2/A2PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €52.72

  • PR NF EN ISO 15877-5/A2, T54-014-5/A2PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €60.48

  • PR NF EN ISO 15876-5/A1, T54-944-5/A1PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €52.72

  • PR NF EN ISO 15876-2/A1, T54-944-2/A1PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €60.48

  • PR NF EN ISO 15875-5/A1, T54-943-5/A1PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €60.48

  • PR NF EN ISO 15875-2/A2, T54-943-2/A2PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €60.48

  • PR NF EN ISO 22391-2/A1, T54-982-2/A1PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €52.72

  • PR NF EN ISO 22391-5/A1, T54-982-5/A1PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €60.48

  • ASTM F412-20

    Standard Terminology Relating to Plastic Piping Systems
    4/1/2020 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F412-20 + Redline

    Standard Terminology Relating to Plastic Piping Systems
    4/1/2020 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM F2905/F2905M-20a

    Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications
    4/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2905/F2905M-20a + Redline

    Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications
    4/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • 20/30409941 DC:2020

    BS ISO 13266. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
    3/25/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30409935 DC:2020

    BS ISO 13268. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
    3/25/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30409938 DC:2020

    BS ISO 13267. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
    3/20/2020 - PDF - English - BSI
    Learn More
    €23.70

  • ASTM D2321-20

    Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
    3/15/2020 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D2321-20 + Redline

    Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
    3/15/2020 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM D3262-20

    Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
    3/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D3262-20 + Redline

    Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
    3/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • PR NF EN ISO 15494/A1, T54-946/A1PR (03/2020)


    3/1/2020 - Paper - English, French - AFNOR
    Learn More
    €52.72

  • 20/30405520 DC:2020

    BS EN ISO 15876-5 AMD1. Plastics piping systems for hot and cold water installations. Polybutene (PB) Part 5. Fitness purpose of the system
    2/28/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30405524 DC:2020

    BS EN ISO 15877-2 AMD2. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Part 2. Pipes
    2/28/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30405532 DC:2020

    BS EN ISO 15877-5 AMD2. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Part 5. Fitness purpose of the system
    2/28/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30405512 DC:2020

    BS EN ISO 15876-2 AMD1. Plastics piping systems for hot and cold water installations. Polybutene (PB) Part 2. Pipes
    2/28/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30405536 DC:2020

    BS EN ISO 22391-2 AMD1. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Part 2. Pipes
    2/28/2020 - PDF - English - BSI
    Learn More
    €23.70

  • PD CEN/TS 1401-2:2020

    Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance the assessment of conformity
    2/27/2020 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 8513:2016 + Redline

    Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the initial longitudinal tensile strength
    2/27/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS EN ISO 11298-3:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11299-3:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • 20/30405180 DC:2020

    BS EN ISO 15875-2 AMD2. Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Part 2. Pipes
    2/27/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30405188 DC:2020

    BS EN ISO 15875-5 AMD1. Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Part 5. Fitness purpose of the system
    2/27/2020 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN ISO 11298-1:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground water supply networks General
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11297-3:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11299-1:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground gas supply networks General
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 13845:2015 + Redline

    Tracked Changes. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leaktightness under internal pressure and with angular deflection
    2/27/2020 - PDF - English - BSI
    Learn More
    €169.46

  • BS EN ISO 11297-1:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground drainage and sewerage networks under pressure General
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 6259-1:2015 + Redline

    Tracked Changes. Thermoplastics pipes. Determination of tensile properties General test method
    2/26/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS EN ISO 9967:2016 + Redline

    Tracked Changes. Thermoplastics pipes. Determination of creep ratio
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS ISO 11922-1:2018 + Redline

    Tracked Changes. Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances Metric series
    2/26/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS EN ISO 15876-5:2017 + Redline

    Tracked Changes. Plastics piping systems for hot and cold water installations. Polybutene (PB) Fitness purpose of the system
    2/26/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS ISO 12176-1:2017 + Redline

    Tracked Changes. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Butt
    2/26/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS EN ISO 13257:2018 + Redline

    Tracked Changes. Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
    2/26/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS ISO 10928:2016 + Redline

    Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
    2/26/2020 - PDF - English - BSI
    Learn More
    €391.29

  • BS EN ISO 11296-3:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with close-fit pipes
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11296-1:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks General
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN 12200-1:2016 + Redline

    Tracked Changes. Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications pipes, fittings and the system
    2/25/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS EN 13476-1:2018 + Redline

    Tracked Changes. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) General requirements performance characteristics
    2/25/2020 - PDF - English - BSI
    Learn More
    €280.37

  • PD CEN ISO/TS 15876-7:2018 + Redline

    Tracked Changes. Plastics piping systems for hot and cold water installations. Polybutylene (PB) Guidance the assessment of conformity
    2/24/2020 - PDF - English - BSI
    Learn More
    €280.37

  • PD CEN ISO/TS 15877-7:2018 + Redline

    Tracked Changes. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Guidance the assessment of conformity
    2/24/2020 - PDF - English - BSI
    Learn More
    €280.37

  • PD CEN ISO/TS 15875-7:2018 + Redline

    Tracked Changes. Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Guidance the assessment of conformity
    2/24/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN 1401-1:2019 + Redline

    Tracked Changes. Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications pipes, fittings the system
    2/24/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS EN ISO 9969:2016 + Redline

    Tracked Changes. Thermoplastics pipes. Determination of ring stiffness
    2/24/2020 - PDF - English - BSI
    Learn More
    €200.27

  • PD CEN ISO/TS 21003-7:2019 + Redline

    Tracked Changes. Multilayer piping systems for hot and cold water installations inside buildings Guidance the assessment of conformity
    2/24/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS ISO 4427-1:2019 + Redline

    Tracked Changes. Plastics piping systems for water supply and drainage sewerage under pressure. Polyethylene (PE) General
    2/24/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS ISO 4427-2:2019 + Redline

    Tracked Changes. Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Pipes
    2/24/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11296-7:2019 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes
    2/24/2020 - PDF - English - BSI
    Learn More
    €280.37

  • ASTM F949-20

    Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
    2/15/2020 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F949-20 + Redline

    Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
    2/15/2020 - PDF - English - ASTM
    Learn More
    €62.00

  • UNE-EN 12201-2:2012+A1:2020

    Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
    2/12/2020 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN 12201-2:2012+A1:2020

    Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
    2/12/2020 - PDF - English - AENOR
    Learn More
    €72.00

  • ASTM F2829/F2829M-20

    Standard Specification for Metric- and Inch-Sized Fittings for Crosslinked Polyethylene (PEX) Pipe
    2/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2829/F2829M-20 + Redline

    Standard Specification for Metric- and Inch-Sized Fittings for Crosslinked Polyethylene (PEX) Pipe
    2/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F2788/F2788M-20

    Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
    2/1/2020 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F2788/F2788M-20 + Redline

    Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
    2/1/2020 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM F449-20

    Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
    2/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F449-20 + Redline

    Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
    2/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • BS ISO 4065:2018

    Thermoplastics pipes. Universal wall thickness table
    1/23/2020 - PDF - English - BSI
    Learn More
    €154.05

  • UNE 53331:2020

    Plastics. Unplastized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), polyethylene (PE) and polypropylene (PP) pipes. Criterion for the assessment of pipes for plastics piping systems with car without pressure under external loads.
    1/15/2020 - PDF - Spanish - AENOR
    Learn More
    €81.00

  • UNE-EN ISO 13257:2020

    Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
    1/8/2020 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • UNE-EN ISO 13257:2020

    Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
    1/8/2020 - PDF - English - AENOR
    Learn More
    €64.00

  • ASTM F877-20

    Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
    1/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F877-20 + Redline

    Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
    1/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F2019-20

    Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
    1/1/2020 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F2019-20 + Redline

    Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
    1/1/2020 - PDF - English - ASTM
    Learn More
    €62.00

  • UNE-EN 17176-1:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
    12/26/2019 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN 17176-1:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
    12/26/2019 - PDF - English - AENOR
    Learn More
    €62.00

  • UNE-EN 17176-2:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
    12/26/2019 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN 17176-2:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
    12/26/2019 - PDF - English - AENOR
    Learn More
    €72.00

  • UNE-EN 17176-5:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
    12/26/2019 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN 17176-5:2019

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
    12/26/2019 - PDF - English - AENOR
    Learn More
    €62.00

  • PD CEN/TS 1852-2:2019

    Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance the assessment of conformity
    12/13/2019 - PDF - English - BSI
    Learn More
    €215.67

  • PD CEN/TS 1451-2:2019

    Plastic piping systems for soil and waste discharge (low high temperature) within the building structure. Polypropylene (PP) Guidance assessment of conformity
    12/13/2019 - PDF - English - BSI
    Learn More
    €215.67

  • PD CEN/TS 13476-4:2019

    Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Assessment conformity
    12/13/2019 - PDF - English - BSI
    Learn More
    €215.67

  • BS EN 1519-1:2019

    Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Polyethylene (PE) Requirements pipes, fittings system
    12/3/2019 - PDF - English - BSI
    Learn More
    €253.59

  • PR NF EN 1555-1, T54-065-1PR (12/2019)


    12/1/2019 - Paper - English, French - AFNOR
    Learn More
    €82.95

  • PR NF EN 1555-2, T54-065-2PR (12/2019)


    12/1/2019 - Paper - English, French - AFNOR
    Learn More
    €91.25

  • PR NF EN 1555-4, T54-065-4PR (12/2019)


    12/1/2019 - Paper - English, French - AFNOR
    Learn More
    €91.25

  • PR NF EN 1555-5, T54-065-5PR (12/2019)


    12/1/2019 - Paper - English, French - AFNOR
    Learn More
    €75.41

  • PR NF EN 16436-1+A2/A3, D36-387-1+A2/A3PR (12/2019)


    12/1/2019 - Paper - English, French - AFNOR
    Learn More
    €42.16

  • ASTM F3203-19

    Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing
    11/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F3203-19 + Redline

    Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing
    11/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM F3253-19

    Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
    11/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F3253-19 + Redline

    Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
    11/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM F512-19

    Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
    11/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F512-19 + Redline

    Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
    11/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F2389-19

    Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
    11/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2389-19 + Redline

    Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
    11/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • UNE-CEN ISO/TS 21003-7:2019

    Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity (ISO/TS 21003-7:2019) (Endorsed by Asociación Española de Normalización in November of 2019.)
    11/1/2019 - PDF - English - AENOR
    Learn More
    €78.00

  • ASTM F1606-19

    Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
    11/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F1606-19 + Redline

    Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
    11/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D3139-19

    Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
    11/1/2019 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D3139-19 + Redline

    Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
    11/1/2019 - PDF - English - ASTM
    Learn More
    €48.00

  • 19/30397149 DC:2019

    BS EN 1555-2. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Part 2. Pipes
    10/10/2019 - PDF - English - BSI
    Learn More
    €23.70

  • PR NF EN ISO 6259-2, T54-955-2PR (10/2019)


    10/1/2019 - Paper - English, French - AFNOR
    Learn More
    €75.41

  • UNE-EN ISO 11297-3:2019

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
    9/25/2019 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN ISO 11297-3:2019

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
    9/25/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • UNE-EN ISO 11298-3:2019

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    9/25/2019 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN ISO 11298-3:2019

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    9/25/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • UNE-EN ISO 11296-3:2019

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
    9/11/2019 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN ISO 11296-3:2019

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
    9/11/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • ASTM F2619/F2619M-19

    Standard Specification for High-Density Polyethylene (PE) Line Pipe
    9/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F2619/F2619M-19 + Redline

    Standard Specification for High-Density Polyethylene (PE) Line Pipe
    9/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • 19/30395450 DC:2019

    BS EN 1329-1. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Part 1. Specifications pipes, fittings
    8/19/2019 - PDF - English - BSI
    Learn More
    €23.70

  • BS ISO 4427-2:2019

    Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Pipes
    8/19/2019 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 4427-5:2019

    Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Fitness purpose of the system
    8/15/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 4427-1:2019

    Plastics piping systems for water supply and drainage sewerage under pressure. Polyethylene (PE) General
    8/15/2019 - PDF - English - BSI
    Learn More
    €215.67

  • 19/30384313 DC:2019

    BS EN ISO 6259-2. Thermoplastics pipes. Determination of tensile properties Part 2. Pipes made unplasticized poly(vinyl chloride) (PVC-U), oriented chloride (PVC-O), chlorinated poly (vinyl (PVC-C) and high-impact (PVC-HI)
    8/12/2019 - PDF - English - BSI
    Learn More
    €23.70

  • BS ISO 8533:2019

    Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of cemented or wrapped joints
    8/7/2019 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 8483:2019

    Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of bolted flange joints
    8/7/2019 - PDF - English - BSI
    Learn More
    €215.67

  • ASTM D3517-19

    Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
    8/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D3517-19 + Redline

    Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
    8/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM D2513-19

    Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
    8/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D2513-19 + Redline

    Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
    8/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • PR NF EN ISO 11298-4, T54-967-4PR (08/2019)

    Systèmes de canalisation en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 4 : tubage continu par tubes polymérisés sur place
    8/1/2019 - Paper - English, French - AFNOR
    Learn More
    €129.45

  • PR NF EN ISO 23856, T57-234PR (08/2019)

    Systèmes de canalisation en matières plastiques pour l'alimentation en eau, les branchements et les collecteurs d'assainissement avec ou sans pression - Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP)
    8/1/2019 - Paper - English, French - AFNOR
    Learn More
    €138.37

  • ASTM F442/F442M-19

    Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
    8/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F442/F442M-19 + Redline

    Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
    8/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F876-19a

    Standard Specification for Crosslinked Polyethylene (PEX) Tubing
    8/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F876-19a + Redline

    Standard Specification for Crosslinked Polyethylene (PEX) Tubing
    8/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM D2444-19

    Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
    8/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D2444-19 + Redline

    Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
    8/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • BS EN 1401-1:2019

    Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications pipes, fittings the system
    7/23/2019 - PDF - English - BSI
    Learn More
    €253.59

  • BS ISO 7685:2019

    Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial ring stiffness
    7/18/2019 - PDF - English - BSI
    Learn More
    €154.05

  • 19/30390737 DC:2019

    BS EN ISO 11298-4. Plastics piping systems for renovation of underground water supply networks Part 4. Lining with cured-in-place pipes
    6/18/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30391758 DC:2019

    BS EN ISO 23856. Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
    6/18/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30389925 DC:2019

    BS ISO 8521. Glass-reinforced thermosetting plastic (GRP) pipes. Test methods for the determination of the initial circumferential tensile wall strength
    6/13/2019 - PDF - English - BSI
    Learn More
    €23.70

  • PD CEN ISO/TS 21003-7:2019

    Multilayer piping systems for hot and cold water installations inside buildings Guidance the assessment of conformity
    6/12/2019 - PDF - English - BSI
    Learn More
    €253.59

  • ASTM F3346-19

    Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PERT/AL/PE-RT) Composite Pressure Pipe
    6/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • PR NF EN 13476-3/A1, P16-353-3/A1PR (06/2019)

    Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 3 : Spécifications pour les tubes et raccords avec une surface interne lisse et une surface externe profilée et le système, de Type B
    6/1/2019 - Paper - English, French - AFNOR
    Learn More
    €42.16

  • 19/30385511 DC:2019

    BS ISO 21307 AMD1. Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) piping systems
    5/21/2019 - PDF - English - BSI
    Learn More
    €23.70

  • PD CEN/TS 17176-3:2019

    Plastic piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fittings
    5/9/2019 - PDF - English - BSI
    Learn More
    €215.67

  • BS EN 17176-2:2019

    Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Pipes
    5/3/2019 - PDF - English - BSI
    Learn More
    €215.67

  • BS EN 17176-1:2019

    Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) General
    5/3/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN 17176-5:2019

    Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fitness purpose of the system
    5/3/2019 - PDF - English - BSI
    Learn More
    €154.05

  • UNE-EN ISO 19893:2019

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
    4/30/2019 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN ISO 19893:2019

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
    4/30/2019 - PDF - English - AENOR
    Learn More
    €61.00

  • UNE-EN ISO 19892:2019

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
    4/30/2019 - PDF - Spanish - AENOR
    Learn More
    €38.00

  • UNE-EN ISO 19892:2019

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
    4/30/2019 - PDF - English - AENOR
    Learn More
    €45.00

  • 19/30389686 DC:2019

    BS EN 13476-2 AMD1. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 2. Specifications pipes fittings with smooth internal external surface the system, Type A
    4/16/2019 - PDF - English - BSI
    Learn More
    €23.70

  • ASTM F2623-19

    Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
    4/15/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2623-19 + Redline

    Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
    4/15/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • 19/30389689 DC:2019

    BS EN 13476-3 AMD1. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 3. Specifications pipes fittings with smooth internal profiled external surface the system, Type B
    4/15/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30363786 DC:2019

    BS ISO 12176-5. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Part 5. Two-dimensional data coding of components exchange format PE piping
    4/12/2019 - PDF - English - BSI
    Learn More
    €23.70

  • UNE-EN ISO 13056:2019

    Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
    4/3/2019 - PDF - Spanish - AENOR
    Learn More
    €35.00

  • UNE-EN ISO 13056:2019

    Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
    4/3/2019 - PDF - English - AENOR
    Learn More
    €42.00

  • NF EN 17176-2, T54-968-2 (04/2019)

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes - Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF EN 17176-1, T54-968-1 (04/2019)

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General - Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 1 : Généralités
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN 17176-5, T54-968-5 (04/2019)

    Plastic piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system - Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 5 : Aptitude à l'emploi du système
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN 1519-1, T54-917-1 (04/2019)

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system - Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure du bâtiments - Polyéthylène (PE) - Partie 1 : Exigences pour tubes, raccords et le système
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €84.02

  • ISO/TS 21003-7:2019

    Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
    4/1/2019 - Paper - English - ISO
    Learn More
    €144.00

  • ASTM D2846/D2846M-19a

    Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
    4/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D2846/D2846M-19a + Redline

    Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
    4/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM F3219-19

    Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
    4/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F3219-19 + Redline

    Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
    4/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F2855-19

    Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
    4/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2855-19 + Redline

    Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
    4/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F2881/F2881M-19

    Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
    4/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2881/F2881M-19 + Redline

    Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
    4/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • NBN EN ISO 11296-7:2019

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
    3/26/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 11296-7:2019

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
    3/26/2019 - PDF - French - NBN
    Learn More
    €45.00

  • BS ISO 6964:2019

    Polyolefin pipes and fittings. Determination of carbon black content by calcination and pyrolysis. Test method
    3/11/2019 - PDF - English - BSI
    Learn More
    €154.05

  • ISO 10146:2019

    Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
    3/1/2019 - Paper - English - ISO
    Learn More
    €61.00

  • ASTM F3128-19

    Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core
    3/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F3128-19 + Redline

    Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core
    3/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • UNE-CEN ISO/TS 15877-7:2018

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
    3/1/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • UNE-CEN ISO/TS 15874-7:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
    3/1/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • UNE-CEN ISO/TS 15876-7:2018

    Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
    3/1/2019 - PDF - English - AENOR
    Learn More
    €70.00

  • UNE-CEN ISO/TS 15875-7:2018

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
    3/1/2019 - PDF - English - AENOR
    Learn More
    €71.00

  • BS ISO 10146:2019

    Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX). Effect of time and temperature on expected strength
    2/27/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 11296-7:2019

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes
    2/18/2019 - PDF - English - BSI
    Learn More
    €215.67

  • NF EN ISO 11296-7, P16-364-7 (02/2019)

    Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 7 : tubage par enroulement hélicoïdal - Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 7: Tubage par enroulement hélicoïdal avec espace annulaire
    2/1/2019 - Paper - French - AFNOR
    Learn More
    €64.01

  • ISO 6964:2019

    Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
    2/1/2019 - Paper - English - ISO
    Learn More
    €61.00

  • ASTM F1057-19

    Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
    2/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F1057-19 + Redline

    Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
    2/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F894-19

    Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
    2/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F894-19 + Redline

    Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
    2/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM F2620-19

    Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
    2/1/2019 - PDF - English - ASTM
    Learn More
    €67.00

  • ASTM F2620-19 + Redline

    Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
    2/1/2019 - PDF - English - ASTM
    Learn More
    €80.00

  • NBN EN ISO 11299-1:2019

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
    1/30/2019 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 11299-1:2019

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
    1/30/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 11299-1:2019

    Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
    1/30/2019 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 11299-3:2019

    Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
    1/30/2019 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 11299-3:2019

    Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
    1/30/2019 - PDF - English - NBN
    Learn More
    €45.00

Items 1 to 200 of 1758 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9