23.040.10 : Iron and steel pipes 23.040 : Pipeline components and pipelines 23 : Fluid systems and components for general use ICS, Published by: DIN

DIN EN 10378:2024-04

Welded stainless steel square and rectangular tubes for mechanical, engineering and decorative use - Technical delivery conditions, German and English version prEN 10378:2024
4/1/2024 - PDF - English, German - DIN
Learn More

€99.35

DIN EN 10216-2:2023-05

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties, German and English version prEN 10216-2:2023
5/1/2023 - PDF - English, German - DIN
Learn More

€120.84

DIN EN 17970:2023-05

Ductile iron pipes - Push-in joints for ductile iron pipe systems - Resistance against root intrusion - Requirements and test methods, German and English version prEN 17970:2023
5/1/2023 - PDF - English, German - DIN
Learn More

€65.89

DIN EN 10217-1/A1:2023-02

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties, German and English version EN 10217-1:2019/prA1:2023
2/1/2023 - PDF - English, German - DIN
Learn More

€39.35

DIN EN 10357:2022-10

Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry, German version EN 10357:2022
10/1/2022 - PDF - German - DIN
Learn More

€59.63

DIN EN 253/A1:2022-07

District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene, German and English version EN 253:2019/prA1:2022
7/1/2022 - PDF - English, German - DIN
Learn More

€45.98

DIN EN 13941-1:2022-06

District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 1: Design, German version EN 13941-1:2019+A1:2021
6/1/2022 - PDF - German - DIN
Learn More

€246.73

DIN EN 13941-2:2022-06

District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 2: Installation, German version EN 13941-2:2019+A1:2021
6/1/2022 - PDF - German - DIN
Learn More

€184.58

DIN 28177:2022-02

Structural tube (dimple tube) for heat transfer on process equipment - Dimensions and materials
2/1/2022 - PDF - German - DIN
Learn More

€59.63

DIN 4927:2021-12

Flanged steel rising pipes for raising of water - Nominal diameter 50 to 200.
12/1/2021 - PDF - German - DIN
Learn More

€45.98

DIN EN 10216-5:2021-06

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes, German version EN 10216-5:2021
6/1/2021 - PDF - German - DIN
Learn More

€115.33

DIN EN 10217-7:2021-06

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes, German version EN 10217-7:2021
6/1/2021 - PDF - German - DIN
Learn More

€110.00

DIN EN 15655-2:2021-01

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes, German version EN 15655-2:2020
1/1/2021 - PDF - German - DIN
Learn More

€79.72

DIN EN ISO 21809-2:2021-01

Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO/DIS 21809-2:2020), English version prEN ISO 21809-2:2020
1/1/2021 - PDF - English, German - DIN
Learn More

€148.04

DIN 16282:2020-12

Siphons for pressure gauges and their accessories
12/1/2020 - PDF - German - DIN
Learn More

€65.89

DIN EN ISO 13680:2020-11

Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020), English version EN ISO 13680:2020, only on CD-ROM.
11/1/2020 - PDF - English, German - DIN
Learn More

€216.26

DIN 3267:2020-11

Sanitary tapware - Flushing tubes for flush-valves
11/1/2020 - PDF - German - DIN
Learn More

€32.34

DIN EN ISO 10893-2:2020-10

Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011 + Amd 1:2020), German version EN ISO 10893-2:2011 + A1:2020
10/1/2020 - PDF - German - DIN
Learn More

€79.72

DIN EN ISO 10893-8:2020-10

Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011 + Amd 1:2020), German version EN ISO 10893-8:2011 + A1:2020
10/1/2020 - PDF - German - DIN
Learn More

€72.80

DIN EN ISO 10893-1:2020-10

Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011 + Amd 1:2020), German version EN ISO 10893-1:2011 + A1:2020
10/1/2020 - PDF - German - DIN
Learn More

€79.72

DIN EN ISO 10893-12:2020-10

Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011 + Amd 1:2020), German version EN ISO 10893-12:2011 + A1:2020
10/1/2020 - PDF - German - DIN
Learn More

€59.63

DIN EN ISO 10893-10:2020-10

Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011 + Amd 1:2020), German version EN ISO 10893-10:2011 + A1:2020
10/1/2020 - PDF - German - DIN
Learn More

€79.72

DIN EN ISO 10893-11:2020-10

Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011 + Amd 1:2020), German version EN ISO 10893-11:2011 + A1:2020
10/1/2020 - PDF - German - DIN
Learn More

€72.80

DIN EN ISO 10893-9:2020-10

Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011 + Amd 1:2020), German version EN ISO 10893-9:2011 + A1:2020
10/1/2020 - PDF - German - DIN
Learn More

€72.80

DIN EN ISO 10893-3:2020-10

Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011 + Amd 1:2019 + Amd 2:2020), German version EN ISO 10893-3:2011 + A1:2019 + A2:2020
10/1/2020 - PDF - German - DIN
Learn More

€79.72

DIN EN ISO 21809-1:2020-09

Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018), German version EN ISO 21809-1:2018
9/1/2020 - PDF - German - DIN
Learn More

€158.04

DIN EN ISO 21809-3:2020-09

Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016 + Amd 1:2020), English version EN ISO 21809-3:2016 + A1:2020
9/1/2020 - PDF - English, German - DIN
Learn More

€234.02

DIN EN 14628-1:2020-09

Ductile iron pipes, fittings and accessories - Requirements and test methods - Part 1: PE coatings, German version EN 14628-1:2020
9/1/2020 - PDF - German - DIN
Learn More

€85.79

DIN EN 10216-2:2020-04

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10216-2:2013+A1:2019
4/1/2020 - PDF - German - DIN
Learn More

€115.33

DIN EN 15698-1:2020-04

District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene, German version EN 15698-1:2019
4/1/2020 - PDF - German - DIN
Learn More

€72.80

DIN 2413:2020-04

Seamless steel tubes for oil- and water-hydraulic systems - Calculation rules for pipes and elbows for dynamic loads
4/1/2020 - PDF - German - DIN
Learn More

€99.35

DIN EN 253:2020-03

District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene, German version EN 253:2019
3/1/2020 - PDF - German - DIN
Learn More

€126.26

DIN EN 14901-2:2020-02

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO), German version EN 14901-2:2019
2/1/2020 - PDF - German - DIN
Learn More

€72.80

DIN EN ISO 3183:2020-02

Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2019), German version EN ISO 3183:2019
2/1/2020 - PDF - German - DIN
Learn More

€99.35

DIN EN 14901-1:2020-01

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty), German version EN 14901-1:2014+A1:2019
1/1/2020 - PDF - German - DIN
Learn More

€79.72

DIN EN 10217-1:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties, German version EN 10217-1:2019
8/1/2019 - PDF - German - DIN
Learn More

€120.84

DIN EN 10217-2:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10217-2:2019
8/1/2019 - PDF - German - DIN
Learn More

€104.95

DIN EN 10217-3:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties, German version EN 10217-3:2019
8/1/2019 - PDF - German - DIN
Learn More

€126.26

DIN EN 10217-4:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties, German version EN 10217-4:2019
8/1/2019 - PDF - German - DIN
Learn More

€99.35

DIN EN 10217-5:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10217-5:2019
8/1/2019 - PDF - German - DIN
Learn More

€115.33

DIN EN 10217-6:2019-08

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties, German version EN 10217-6:2019
8/1/2019 - PDF - German - DIN
Learn More

€115.33

DIN EN ISO 10893-6:2019-06

Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019), German version EN ISO 10893-6:2019
6/1/2019 - PDF - German - DIN
Learn More

€79.72

DIN EN ISO 10893-7:2019-06

Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019), German version EN ISO 10893-7:2019
6/1/2019 - PDF - German - DIN
Learn More

€92.62

DIN EN 15655-1:2019-04

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings, German version EN 15655-1:2018
4/1/2019 - PDF - German - DIN
Learn More

€85.79

DIN EN ISO 1127:2019-03

Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992), German version EN ISO 1127:1996
3/1/2019 - PDF - German - DIN
Learn More

€59.63

DIN EN ISO 1127:2019-03

Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
3/1/2019 - PDF - English - DIN
Learn More

€74.58

DIN 4900-1:2017-10

Steel filter and solid wall pipes for wells - Part 1: Solid wall pipes and slot perforation filters.
10/1/2017 - PDF - German - DIN
Learn More

€52.90

DIN 4900-2:2017-10

Steel filter and solid wall pipes for wells - Part 2: Wire wrapped screens made of stainless steel.
10/1/2017 - PDF - German - DIN
Learn More

€45.98

DIN 11866:2016-11

Stainless steel components for aseptic applications in the chemical and pharmaceutical industry - Tubes.
11/1/2016 - PDF - German - DIN
Learn More

€65.89

DIN 4930:2016-10

Pipes for use in freezing shaft sinking - Dimensions and technical delivery conditions
10/1/2016 - PDF - German - DIN
Learn More

€52.90

DIN 86009:2016-05

Exhaust gas lines on ships - Steel tubes
5/1/2016 - PDF - German - DIN
Learn More

€39.35

DIN EN 12007-3:2015-07

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific funtional requirements for steel, German version EN 12007-3:2015
7/1/2015 - PDF - German - DIN
Learn More

€85.79

DIN EN 12007-3:2015-07

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific funtional requirements for steel
7/1/2015 - PDF - English - DIN
Learn More

€107.48

DIN EN 10255:2015-05

Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methods, German and English version prEN 10255:2015
5/1/2015 - PDF - English, German - DIN
Learn More

€99.35

DIN EN ISO 21809-2:2015-03

Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014), English version EN ISO 21809-2:2014
3/1/2015 - PDF - English, German - DIN
Learn More

€131.96

DIN EN 1124-2:2014-08

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions, German version EN 1124-2:2014.
8/1/2014 - PDF - German - DIN
Learn More

€92.62

DIN EN 1124-2:2014-08

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
8/1/2014 - PDF - English - DIN
Learn More

€115.98

DIN EN 10216-1:2014-03

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties, German version EN 10216-1:2013
3/1/2014 - PDF - German - DIN
Learn More

€92.62

DIN EN 10216-1:2014-03

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
3/1/2014 - PDF - English - DIN
Learn More

€115.98

DIN EN 10216-4:2014-03

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties, German version EN 10216-4:2013
3/1/2014 - PDF - German - DIN
Learn More

€92.62

DIN EN 10216-4:2014-03

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
3/1/2014 - PDF - English - DIN
Learn More

€115.98

DIN EN 10216-3:2014-03

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes, German version EN 10216-3:2013
3/1/2014 - PDF - German - DIN
Learn More

€104.95

DIN EN 10216-3:2014-03

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
3/1/2014 - PDF - English - DIN
Learn More

€131.40

DIN EN 1124-4:2014-02

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships, German version EN 1124-4:2013.
2/1/2014 - PDF - German - DIN
Learn More

€92.62

DIN EN 1124-4:2014-02

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
2/1/2014 - PDF - English - DIN
Learn More

€115.98

DIN EN 545:2011-09

Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods, German version EN 545:2010
9/1/2011 - PDF - German - DIN
Learn More

€179.72

DIN EN 545:2011-09

Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
9/1/2011 - PDF - English - DIN
Learn More

€224.67

DIN EN ISO 10893-4:2011-07

Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011), German version EN ISO 10893-4:2011
7/1/2011 - PDF - German - DIN
Learn More

€59.63

DIN EN ISO 10893-4:2011-07

Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011)
7/1/2011 - PDF - English - DIN
Learn More

€74.58

DIN EN ISO 10893-5:2011-07

Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011), German version EN ISO 10893-5:2011
7/1/2011 - PDF - German - DIN
Learn More

€59.63

DIN EN ISO 10893-5:2011-07

Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011)
7/1/2011 - PDF - English - DIN
Learn More

€74.58

DIN 19522:2010-12

Cast iron drainage pipes and fittings without socket (SML).
12/1/2010 - PDF - German - DIN
Learn More

€92.62

DIN EN 598:2009-10

Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods, German version EN 598:2007+A1:2009
10/1/2009 - PDF - German - DIN
Learn More

€148.04

DIN EN 598:2009-10

Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009)
10/1/2009 - PDF - English - DIN
Learn More

€184.86

DIN EN 969:2009-07

Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods, German version EN 969:2009
7/1/2009 - PDF - German - DIN
Learn More

€152.71

DIN EN 969:2009-07

Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
7/1/2009 - PDF - English - DIN
Learn More

€190.93

DIN EN 1124-3:2009-02

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions; German version EN 1124-3:2008
2/1/2009 - PDF - German - DIN
Learn More

€110.00

DIN EN 1124-3:2009-02

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions; German version EN 1124-3:2008
2/1/2009 - PDF - English - DIN
Learn More

€137.85

DIN EN 3658:2008-12

Aerospace series - Tube bend radii, for engine application - Design standard; German and English version EN 3658:2008
12/1/2008 - PDF - English, German - DIN
Learn More

€72.80

DIN EN 1123-2:2007-12

Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions; German version EN 1123-2:2006+A1:2007
12/1/2007 - PDF - German - DIN
Learn More

€131.96

DIN EN 1123-2:2007-12

Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions; German version EN 1123-2:2006+A1:2007
12/1/2007 - PDF - English - DIN
Learn More

€164.95

DIN 28179:2007-09

Steel U-tubes for tubular heat exchangers - Technical delivery conditions
9/1/2007 - PDF - German - DIN
Learn More

€85.79

DIN 28180:2007-09

Seamless steel tubes for tubular heat exchangers - Dimensions and materials
9/1/2007 - PDF - German - DIN
Learn More

€52.90

DIN 28180:2007-09

Seamless steel tubes for tubular heat exchangers - Dimensions and materials
9/1/2007 - PDF - English - DIN
Learn More

€66.07

DIN 28181:2007-09

Welded steel tubes for tubular heat exchangers - Dimensions and materials
9/1/2007 - PDF - German - DIN
Learn More

€52.90

DIN 28181:2007-09

Welded steel tubes for tubular heat exchangers - Dimensions and materials
9/1/2007 - PDF - English - DIN
Learn More

€66.07

DIN EN 10255:2007-07

Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions; German version EN 10255:2004 + A1:2007
7/1/2007 - PDF - German - DIN
Learn More

€85.79

DIN EN 10255:2007-07

Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions; German version EN 10255:2004 + A1:2007
7/1/2007 - PDF - English - DIN
Learn More

€107.48

DIN EN 15189:2007-02

Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods; German version EN 15189:2006
2/1/2007 - PDF - German - DIN
Learn More

€72.80

DIN EN 15189:2007-02

Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods; German version EN 15189:2006
2/1/2007 - PDF - English - DIN
Learn More

€91.12

DIN 4945-2:2006-09

Rising pipes with tension proof socket for water raising - Part 2: Stainless steel pipes DN 50 to DN 200
9/1/2006 - PDF - German - DIN
Learn More

€45.98

DIN EN 1124-1 Berichtigung 1:2006-01

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control, German version EN 1124-1:1999 + A1:2004, Corrigenda to DIN EN 1124-1:2004-12
1/1/2006 - PDF - German - DIN
Learn More

€0.00

DIN EN 10298:2005-12

Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; German version EN 10298:2005
12/1/2005 - PDF - German - DIN
Learn More

€85.79

DIN EN 10298:2005-12

Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; German version EN 10298:2005
12/1/2005 - PDF - English - DIN
Learn More

€107.48

DIN EN 10224:2005-12

Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10224:2002 + A1:2005
12/1/2005 - PDF - German - DIN
Learn More

€120.84

DIN EN 10224:2005-12

Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10224:2002 + A1:2005
12/1/2005 - PDF - English - DIN
Learn More

€150.93

DIN EN 10312:2005-12

Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005
12/1/2005 - PDF - German - DIN
Learn More

€92.62

DIN EN 10312:2005-12

Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005
12/1/2005 - PDF - English - DIN
Learn More

€115.98

DIN 4945-1:2005-12

Rising pipes with tension proof socket for water raising - Part 1: Steel pipes DN 50 to DN 200, plastic coated
12/1/2005 - PDF - German - DIN
Learn More

€45.98

DIN EN 1123-3:2005-02

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
2/1/2005 - PDF - German - DIN
Learn More

€85.79

DIN EN 1123-3:2005-02

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
2/1/2005 - PDF - English - DIN
Learn More

€107.48

DIN EN 1124-1:2004-12

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1124-1:1999 + A1:2004
12/1/2004 - PDF - German - DIN
Learn More

€85.79

DIN EN 1123-1:2004-12

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1123-1:1999 + A1:2004
12/1/2004 - PDF - German - DIN
Learn More

€85.79

23.040.10 : Iron and steel pipes

Useful information

Customer service