23.040.01 : Pipeline components and pipelines in general 23.040 : Pipeline components and pipelines 23 : Fluid systems and components for general use ICS, Published by: AENOR

UNE-EN 15001-2:2024

Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
3/27/2024 - PDF - Spanish - AENOR
Learn More

€74.00

UNE-EN 15001-2:2024

Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
3/27/2024 - PDF - English - AENOR
Learn More

€88.80

UNE-EN 1401-1:2020+A1:2024

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
3/20/2024 - PDF - Spanish - AENOR
Learn More

€88.00

UNE-EN 1401-1:2020+A1:2024

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
3/20/2024 - PDF - English - AENOR
Learn More

€105.60

UNE-EN 15001-1:2023

Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
12/27/2023 - PDF - Spanish - AENOR
Learn More

€156.00

UNE-EN 15001-1:2023

Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
12/27/2023 - PDF - English - AENOR
Learn More

€187.20

UNE-EN 1455-1:2023

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
12/20/2023 - PDF - Spanish - AENOR
Learn More

€86.00

UNE-EN 1455-1:2023

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
12/20/2023 - PDF - English - AENOR
Learn More

€103.20

UNE-EN 1566-1:2023

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
12/20/2023 - PDF - Spanish - AENOR
Learn More

€89.00

UNE-EN 1566-1:2023

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
12/20/2023 - PDF - English - AENOR
Learn More

€106.80

UNE-EN 14758-1:2023

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
11/22/2023 - PDF - Spanish - AENOR
Learn More

€89.00

UNE-EN 14758-1:2023

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
11/22/2023 - PDF - English - AENOR
Learn More

€106.80

UNE-EN 17649:2023

Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
1/18/2023 - PDF - Spanish - AENOR
Learn More

€87.00

UNE-EN 17649:2023

Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
1/18/2023 - PDF - English - AENOR
Learn More

€104.40

UNE-EN 17613:2022

LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
12/7/2022 - PDF - Spanish - AENOR
Learn More

€68.00

UNE-EN 17613:2022

LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
12/7/2022 - PDF - English - AENOR
Learn More

€81.60

UNE-CEN/TS 17152-3:2022

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme (Endorsed by Asociación Española de Normalización in January of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More

€64.00

UNE-EN 13480-3:2017/A5:2022

Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More

€69.00

UNE-EN ISO 11295:2022

Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022)
10/11/2022 - PDF - Spanish - AENOR
Learn More

€126.00

UNE-EN ISO 11295:2022

Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022)
10/11/2022 - PDF - English - AENOR
Learn More

€151.20

UNE-EN ISO 21003-3:2009/A1:2022

Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN ISO 21003-3:2009/A1:2022

Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
9/28/2022 - PDF - English - AENOR
Learn More

€72.00

UNE-EN ISO 22391-3:2010/A2:2022

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN ISO 22391-3:2010/A2:2022

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More

€72.00

UNE 53929:2022

Plastics. Rehabilitation of supply and sewerage pipes with continuous cured tubes in situ (CIPP). Design, calculation and installation
7/20/2022 - PDF - Spanish - AENOR
Learn More

€93.00

UNE-EN 877:2022

Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
6/8/2022 - PDF - Spanish - AENOR
Learn More

€103.00

UNE-EN 877:2022

Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
6/8/2022 - PDF - English - AENOR
Learn More

€123.60

UNE-EN 15632-4:2022

District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes, requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
6/1/2022 - PDF - English - AENOR
Learn More

€60.00

UNE-EN 15632-1:2022

District heating pipes - Factory made flexible pipe systems - Part 1: Classification, general requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
6/1/2022 - PDF - English - AENOR
Learn More

€72.00

UNE-EN 15632-2:2022

District heating pipes - Factory made flexible pipe systems - Part 2: Bonded system with plastic service pipes, requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
6/1/2022 - PDF - English - AENOR
Learn More

€65.00

UNE-EN 15632-3:2022

District heating pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes, requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
6/1/2022 - PDF - English - AENOR
Learn More

€64.00

UNE-EN 13476-2:2019+A1:2022

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
5/25/2022 - PDF - Spanish - AENOR
Learn More

€101.00

UNE-EN 13476-2:2019+A1:2022

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
5/25/2022 - PDF - English - AENOR
Learn More

€121.20

UNE-EN 13476-3:2019+A1:2022

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
5/25/2022 - PDF - Spanish - AENOR
Learn More

€102.00

UNE-EN 13476-3:2019+A1:2022

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
5/25/2022 - PDF - English - AENOR
Learn More

€122.40

UNE-EN 1555-1:2022

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
5/11/2022 - PDF - Spanish - AENOR
Learn More

€70.00

UNE-EN 1555-1:2022

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
5/11/2022 - PDF - English - AENOR
Learn More

€84.00

UNE-EN 1555-5:2022

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
5/11/2022 - PDF - Spanish - AENOR
Learn More

€68.00

UNE-EN 1555-5:2022

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
5/11/2022 - PDF - English - AENOR
Learn More

€81.60

UNE-CEN/TS 1555-7:2021

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2022.)
4/1/2022 - PDF - English - AENOR
Learn More

€78.00

UNE-EN 1519-1:2021

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
11/10/2021 - PDF - Spanish - AENOR
Learn More

€83.00

UNE-EN 1519-1:2021

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
11/10/2021 - PDF - English - AENOR
Learn More

€99.60

UNE-EN 13480-3:2017/A4:2021

Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in November of 2021.)
11/1/2021 - PDF - English - AENOR
Learn More

€35.00

UNE-EN 13480-2:2017/A8:2021

Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in November of 2021.)
11/1/2021 - PDF - English - AENOR
Learn More

€38.00

UNE-EN 13480-5:2017/A2:2021

Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in November of 2021.)
11/1/2021 - PDF - English - AENOR
Learn More

€28.00

UNE-EN ISO 15494:2019/A1:2021

Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More

€39.00

UNE-EN ISO 15494:2019/A1:2021

Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More

€46.80

UNE-EN ISO 15875-5:2004/A1:2021

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More

€49.00

UNE-EN ISO 15875-5:2004/A1:2021

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More

€58.80

UNE-EN ISO 15877-2:2009/A2:2021

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More

€39.00

UNE-EN ISO 15877-2:2009/A2:2021

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
9/29/2021 - PDF - English - AENOR
Learn More

€46.80

UNE-EN ISO 15877-5:2009/A2:2021

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More

€46.00

UNE-EN ISO 15877-5:2009/A2:2021

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
9/29/2021 - PDF - English - AENOR
Learn More

€55.20

UNE-EN ISO 22391-2:2010/A1:2021

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More

€39.00

UNE-EN ISO 22391-2:2010/A1:2021

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More

€46.80

UNE-EN ISO 22391-3:2010/A1:2021

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
9/29/2021 - PDF - Spanish - AENOR
Learn More

€34.00

UNE-EN ISO 22391-3:2010/A1:2021

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
9/29/2021 - PDF - English - AENOR
Learn More

€40.80

UNE-EN ISO 22391-5:2010/A1:2021

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
9/29/2021 - PDF - Spanish - AENOR
Learn More

€46.00

UNE-EN ISO 22391-5:2010/A1:2021

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
9/29/2021 - PDF - English - AENOR
Learn More

€55.20

UNE-CEN/TS 1046:2021

Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation (Endorsed by Asociación Española de Normalización in September of 2021.)
9/1/2021 - PDF - English - AENOR
Learn More

€72.00

UNE-EN 13480-3:2017/A1:2021

Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in June of 2021.)
6/1/2021 - PDF - English - AENOR
Learn More

€63.00

UNE-CEN/TS 12007-6:2021

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 6: Specific functional recommendations for unplasticized polyamide (PA-U) (Endorsed by Asociación Española de Normalización in May of 2021.)
5/1/2021 - PDF - English - AENOR
Learn More

€70.00

UNE-EN 1295-1:2021

Structural design of buried pipelines under various conditions of loading - Part 1: General requirements
3/10/2021 - PDF - Spanish - AENOR
Learn More

€80.00

UNE-EN 1295-1:2021

Structural design of buried pipelines under various conditions of loading - Part 1: General requirements
3/10/2021 - PDF - English - AENOR
Learn More

€96.00

UNE-CEN/TS 1519-2:2020

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More

€66.00

UNE-CEN/TS 17176-7:2020

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More

€71.00

UNE-EN 13480-3:2017/A2:2020

Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More

€72.00

UNE-EN 13480-3:2017/A3:2020

Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More

€72.00

UNE-EN 17150:2020

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of short-term compression strength of boxes
7/15/2020 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN 17150:2020

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of short-term compression strength of boxes
7/15/2020 - PDF - English - AENOR
Learn More

€72.00

UNE-EN 17151:2020

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes
7/15/2020 - PDF - Spanish - AENOR
Learn More

€68.00

UNE-EN 17151:2020

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes
7/15/2020 - PDF - English - AENOR
Learn More

€81.60

UNE-EN 17152-1:2020

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U
7/15/2020 - PDF - Spanish - AENOR
Learn More

€68.00

UNE-EN 17152-1:2020

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U
7/15/2020 - PDF - English - AENOR
Learn More

€81.60

UNE-EN 16125:2020

LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
6/10/2020 - PDF - Spanish - AENOR
Learn More

€87.00

UNE-EN 16125:2020

LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
6/10/2020 - PDF - English - AENOR
Learn More

€104.40

UNE-EN 13480-2:2017/A7:2020

Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in June of 2020.)
6/1/2020 - PDF - English - AENOR
Learn More

€16.00

UNE-CEN ISO/TS 21003-7:2019

Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity (ISO/TS 21003-7:2019) (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More

€78.00

UNE-EN ISO 7396-1:2016/A1:2019

Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1 (ISO 7396-1:2016/Amd 1:2017)
10/2/2019 - PDF - Spanish - AENOR
Learn More

€34.00

UNE-EN ISO 7396-1:2016/A1:2019

Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1 (ISO 7396-1:2016/Amd 1:2017)
10/2/2019 - PDF - English - AENOR
Learn More

€40.80

UNE-EN 13480-1:2017/A1:2019

Metallic industrial piping - Part 1: General (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€16.00

UNE-EN 13480-1:2017

Metallic industrial piping - Part 1: General (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€46.00

UNE-EN 13480-2:2017/A2:2018

Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€35.00

UNE-EN 13480-2:2017

Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€70.00

UNE-EN 13480-2:2017/A3:2018

Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€16.00

UNE-EN 13480-2:2017/A1:2018

Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€42.00

UNE-EN 13480-3:2017

Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€420.00

UNE-EN 13480-4:2017

Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€87.00

UNE-EN 13480-5:2017

Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€65.00

UNE-EN 13480-5:2017/A1:2019

Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€35.00

UNE-EN 13480-6:2017

Metallic industrial piping - Part 6: Additional requirements for buried piping (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€64.00

UNE-EN 13480-6:2017/A1:2019

Metallic industrial piping - Part 6: Additional requirements for buried piping (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€24.00

UNE-EN 13480-8:2017

Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.)
9/1/2019 - PDF - English - AENOR
Learn More

€57.00

UNE-EN ISO 20769-1:2019

Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018)
5/22/2019 - PDF - Spanish - AENOR
Learn More

€92.00

UNE-EN ISO 20769-1:2019

Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018)
5/22/2019 - PDF - English - AENOR
Learn More

€110.40

UNE-EN ISO 20769-2:2019

Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018)
5/22/2019 - PDF - Spanish - AENOR
Learn More

€85.00

UNE-EN ISO 20769-2:2019

Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018)
5/22/2019 - PDF - English - AENOR
Learn More

€102.00

UNE-EN ISO 13056:2019

Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
4/3/2019 - PDF - Spanish - AENOR
Learn More

€46.00

UNE-EN ISO 13056:2019

Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
4/3/2019 - PDF - English - AENOR
Learn More

€55.20

UNE-EN ISO 15494:2019

Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
3/27/2019 - PDF - Spanish - AENOR
Learn More

€139.00

UNE-EN ISO 15494:2019

Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
3/27/2019 - PDF - English - AENOR
Learn More

€166.80

UNE-CEN ISO/TS 15874-7:2018

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
3/1/2019 - PDF - English - AENOR
Learn More

€70.00

UNE-CEN ISO/TS 15876-7:2018

Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
3/1/2019 - PDF - English - AENOR
Learn More

€70.00

UNE-CEN ISO/TS 15877-7:2018

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
3/1/2019 - PDF - English - AENOR
Learn More

€70.00

UNE-EN 13476-1:2018

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics
10/10/2018 - PDF - Spanish - AENOR
Learn More

€74.00

UNE-EN 13476-1:2018

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics
10/10/2018 - PDF - English - AENOR
Learn More

€88.80

UNE-EN 1451-1:2018

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system. (Consolidated version)
7/25/2018 - PDF - Spanish - AENOR
Learn More

€100.00

UNE-EN 1451-1:2018

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system. (Consolidated version)
7/25/2018 - PDF - English - AENOR
Learn More

€120.00

UNE-EN ISO 6412-1:2018

Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
3/1/2018 - PDF - English - AENOR
Learn More

€60.00

UNE-EN ISO 6412-2:2018

Technical product documentation - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
3/1/2018 - PDF - English - AENOR
Learn More

€62.00

UNE-EN ISO 6412-3:2018

Technical product documentation - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
3/1/2018 - PDF - English - AENOR
Learn More

€35.00

UNE-CEN/TS 15223:2017

Plastics piping systems - Validated design parameters of buried thermoplastics piping systems (Endorsed by Asociación Española de Normalización in January of 2018.)
1/1/2018 - PDF - English - AENOR
Learn More

€75.00

UNE-EN 1453-1:2017

Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system. (Consolidated version)
10/11/2017 - PDF - Spanish - AENOR
Learn More

€73.00

UNE-EN 1453-1:2017

Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system. (Consolidated version)
10/11/2017 - PDF - English - AENOR
Learn More

€87.60

UNE-CEN/TR 13480-7:2017

Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures (Endorsed by Asociación Española de Normalización in October of 2017.)
10/1/2017 - PDF - English - AENOR
Learn More

€68.00

UNE-EN ISO 14692-2:2017

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017) (Endorsed by Asociación Española de Normalización in October of 2017.)
10/1/2017 - PDF - English - AENOR
Learn More

€119.00

UNE-CEN/TS 1453-2:2017 (R2020)

Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
7/26/2017 - PDF - Spanish - AENOR
Learn More

€68.00

UNE-CEN/TS 1453-2:2017 (R2020)

Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
7/26/2017 - PDF - English - AENOR
Learn More

€81.60

UNE-EN ISO 15493:2004/A1:2017

Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)
4/26/2017 - PDF - Spanish - AENOR
Learn More

€46.00

UNE-EN ISO 15493:2004/A1:2017

Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)
4/26/2017 - PDF - English - AENOR
Learn More

€55.20

UNE-CEN/TS 12200-2:2017 (R2020)

Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2017.)
4/1/2017 - PDF - English - AENOR
Learn More

€65.00

UNE-EN ISO 7396-1:2016

Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)
11/2/2016 - PDF - Spanish - AENOR
Learn More

€177.00

UNE-EN ISO 7396-1:2016

Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)
11/2/2016 - PDF - English - AENOR
Learn More

€212.40

UNE-CEN/TS 14758-2:2016

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 2: Guidance for the assessment of conformity (Endorsed by AENOR in November of 2016.)
11/1/2016 - PDF - English - AENOR
Learn More

€65.00

UNE-EN ISO 10931:2006/A1:2015

Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/Amd 1:2015)
10/28/2015 - PDF - Spanish - AENOR
Learn More

€27.00

UNE-EN ISO 10931:2006/A1:2015

Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/Amd 1:2015)
10/28/2015 - PDF - English - AENOR
Learn More

€32.40

UNE 60302:2015 (R2021)

Pipelines for gaseous fuels. Emplacement.
9/16/2015 - PDF - Spanish - AENOR
Learn More

€17.00

UNE-EN ISO 13845:2015

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
7/29/2015 - PDF - Spanish - AENOR
Learn More

€52.00

UNE-EN ISO 13845:2015

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
7/29/2015 - PDF - English - AENOR
Learn More

€62.40

UNE-CEN/TR 12108:2015 IN

Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption
1/14/2015 - PDF - Spanish - AENOR
Learn More

€71.00

UNE-CEN/TR 12108:2015 IN

Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption
1/14/2015 - PDF - English - AENOR
Learn More

€85.20

UNE-CEN/TS 12201-7:2014

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity (Endorsed by AENOR in December of 2014.)
12/1/2014 - PDF - English - AENOR
Learn More

€78.00

UNE-EN 12560-2:2014 (R2020)

Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
11/12/2014 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN 12560-2:2014 (R2020)

Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
11/12/2014 - PDF - English - AENOR
Learn More

€72.00

UNE-EN 12007-5:2014

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements
11/5/2014 - PDF - Spanish - AENOR
Learn More

€70.00

UNE-EN 12007-5:2014

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements
11/5/2014 - PDF - English - AENOR
Learn More

€84.00

UNE-EN 1594:2014 (R2020)

Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
9/10/2014 - PDF - Spanish - AENOR
Learn More

€128.00

UNE-EN 1594:2014 (R2020)

Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
9/10/2014 - PDF - English - AENOR
Learn More

€153.60

UNE-EN 12007-4:2013 (R2020)

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional requirements for renovation
5/8/2013 - PDF - Spanish - AENOR
Learn More

€74.00

UNE-EN 12007-4:2013 (R2020)

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional requirements for renovation
5/8/2013 - PDF - English - AENOR
Learn More

€88.80

UNE-EN 12007-1:2013

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements
4/30/2013 - PDF - Spanish - AENOR
Learn More

€74.00

UNE-EN 12007-1:2013

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements
4/30/2013 - PDF - English - AENOR
Learn More

€88.80

UNE-EN 12201-5:2012

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
5/3/2012 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN 12201-5:2012

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
5/3/2012 - PDF - English - AENOR
Learn More

€72.00

UNE-EN 12666-1:2006+A1:2012

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
3/21/2012 - PDF - Spanish - AENOR
Learn More

€73.00

UNE-EN 12666-1:2006+A1:2012

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
3/21/2012 - PDF - English - AENOR
Learn More

€87.60

UNE-EN ISO 21003-2:2009/A1:2011

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1 (ISO 21003-2:2008/Amd 1:2011)
12/28/2011 - PDF - Spanish - AENOR
Learn More

€27.00

UNE-EN ISO 21003-2:2009/A1:2011

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1 (ISO 21003-2:2008/Amd 1:2011)
12/28/2011 - PDF - English - AENOR
Learn More

€32.40

UNE-EN ISO 9311-2:2011

Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011)
11/16/2011 - PDF - Spanish - AENOR
Learn More

€53.00

UNE-EN ISO 9311-2:2011

Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011)
11/16/2011 - PDF - English - AENOR
Learn More

€63.60

UNE-CEN/TR 1295-3:2011 IN

Structural design of buried pipelines under various conditions of loading - Part 3: Common method
7/13/2011 - PDF - Spanish - AENOR
Learn More

€181.00

UNE-CEN/TR 1295-3:2011 IN

Structural design of buried pipelines under various conditions of loading - Part 3: Common method
7/13/2011 - PDF - English - AENOR
Learn More

€217.20

UNE-EN ISO 22391-1:2010

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009)
10/13/2010 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN ISO 22391-1:2010

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009)
10/13/2010 - PDF - English - AENOR
Learn More

€72.00

UNE-EN ISO 22391-2:2010

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009)
10/13/2010 - PDF - Spanish - AENOR
Learn More

€68.00

UNE-EN ISO 22391-2:2010

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009)
10/13/2010 - PDF - English - AENOR
Learn More

€81.60

UNE-EN ISO 22391-3:2010

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009)
10/13/2010 - PDF - Spanish - AENOR
Learn More

€68.00

UNE-EN ISO 22391-3:2010

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009)
10/13/2010 - PDF - English - AENOR
Learn More

€81.60

UNE-EN ISO 22391-5:2010

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system (ISO 22391-5:2009)
10/13/2010 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN ISO 22391-5:2010

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system (ISO 22391-5:2009)
10/13/2010 - PDF - English - AENOR
Learn More

€72.00

UNE-EN ISO 1452-1:2010

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
9/15/2010 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN ISO 1452-1:2010

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
9/15/2010 - PDF - English - AENOR
Learn More

€72.00

UNE-EN ISO 1452-2:2010

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009)
9/15/2010 - PDF - Spanish - AENOR
Learn More

€74.00

UNE-EN ISO 1452-2:2010

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009)
9/15/2010 - PDF - English - AENOR
Learn More

€88.80

UNE-EN ISO 1452-4:2010

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves (ISO 1452-4:2009)
9/15/2010 - PDF - Spanish - AENOR
Learn More

€63.00

UNE-EN ISO 1452-4:2010

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves (ISO 1452-4:2009)
9/15/2010 - PDF - English - AENOR
Learn More

€75.60

UNE-EN 13942:2009/AC:2009

Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified/Cor 1:2009) (Endorsed by AENOR in June of 2009.)
6/1/2009 - PDF - English - AENOR
Learn More

€0.00

UNE-EN 13942:2009

Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified) (Endorsed by AENOR in March of 2009.)
3/1/2009 - PDF - English - AENOR
Learn More

€117.00

UNE-EN ISO 21003-1:2009 ERRATUM:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)
2/4/2009 - PDF - Spanish - AENOR
Learn More

€0.00

UNE-EN ISO 21003-2:2009 ERRATUM:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)
2/4/2009 - PDF - Spanish - AENOR
Learn More

€0.00

UNE-EN ISO 21003-3:2009 ERRATUM:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
2/4/2009 - PDF - Spanish - AENOR
Learn More

€0.00

UNE-EN ISO 21003-5:2009 ERRATUM:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008)
2/4/2009 - PDF - Spanish - AENOR
Learn More

€0.00

UNE-EN ISO 21003-1:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)
1/14/2009 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN ISO 21003-1:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)
1/14/2009 - PDF - English - AENOR
Learn More

€72.00

UNE-EN ISO 21003-2:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)
1/14/2009 - PDF - Spanish - AENOR
Learn More

€70.00

UNE-EN ISO 21003-2:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)
1/14/2009 - PDF - English - AENOR
Learn More

€84.00

UNE-EN ISO 21003-3:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
1/14/2009 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN ISO 21003-3:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
1/14/2009 - PDF - English - AENOR
Learn More

€72.00

UNE-EN ISO 21003-5:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008)
1/14/2009 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN ISO 21003-5:2009

Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008)
1/14/2009 - PDF - English - AENOR
Learn More

€72.00

UNE-EN 15266:2008

Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
11/17/2008 - PDF - Spanish - AENOR
Learn More

€95.00

UNE-EN 15266:2008

Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
11/17/2008 - PDF - English - AENOR
Learn More

€114.00

UNE-EN 15189:2008 (R2018)

Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
10/1/2008 - PDF - Spanish - AENOR
Learn More

€68.00

UNE-EN 15189:2008 (R2018)

Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
10/1/2008 - PDF - English - AENOR
Learn More

€81.60

UNE-EN ISO 7396-2:2007

Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007)
11/21/2007 - PDF - Spanish - AENOR
Learn More

€99.00

UNE-EN ISO 7396-2:2007

Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007)
11/21/2007 - PDF - English - AENOR
Learn More

€118.80

UNE-CEN/TR 1295-2:2007 IN

Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
1/10/2007 - PDF - Spanish - AENOR
Learn More

€139.00

UNE-CEN/TR 1295-2:2007 IN

Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
1/10/2007 - PDF - English - AENOR
Learn More

€166.80

UNE-EN ISO 10931:2006 (R2008)

Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005)
11/22/2006 - PDF - Spanish - AENOR
Learn More

€84.00

UNE-EN ISO 10931:2006 (R2008)

Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005)
11/22/2006 - PDF - English - AENOR
Learn More

€100.80

UNE-EN 1333:2006 (R2017)

Flanges and their joints - Pipework components - Definition and selection of PN
10/31/2006 - PDF - Spanish - AENOR
Learn More

€25.00

UNE-EN 1333:2006 (R2017)

Flanges and their joints - Pipework components - Definition and selection of PN
10/31/2006 - PDF - English - AENOR
Learn More

€30.00

UNE-EN ISO 15493:2004 (R2008)

Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003)
2/6/2004 - PDF - Spanish - AENOR
Learn More

€109.00

UNE-EN ISO 15493:2004 (R2008)

Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003)
2/6/2004 - PDF - English - AENOR
Learn More

€130.80