23.040.01 : Pipeline components and pipelines in general

Items 1 to 200 of 1140 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  • DIN 21057-10:2024-04

    Pipe classes for process plants - Part 10: Technical delivery conditions for pipe components of non-alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.1
    4/1/2024 - PDF - German - DIN
    Learn More
    €163.74

  • DIN 21057-11:2024-04

    Pipe classes for process plants - Part 11: Technical delivery conditions for pipe components of austenitic stainless steels of material group 8.1
    4/1/2024 - PDF - German - DIN
    Learn More
    €158.04

  • DIN 21057-12:2024-04

    Pipe classes for process plants - Part 12: Technical delivery conditions for pipe components of non alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.2 and 5.1
    4/1/2024 - PDF - German - DIN
    Learn More
    €158.04

  • UNE-EN 1401-1:2020+A1:2024

    Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    3/20/2024 - PDF - Spanish - AENOR
    Learn More
    €88.00

  • BS EN 1594:2024 + Redline

    Tracked Changes. Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
    3/15/2024 - PDF - English - BSI
    Learn More
    €492.00

  • BS EN 1594:2024

    Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
    3/11/2024 - PDF - English - BSI
    Learn More
    €377.00

  • 24/30476059 DC:2024

    BS EN ISO 21036 Plastics piping systems for industrial applications -Unplasticized Polyamide (PA-U) - Metric series for specifications for components and system
    3/7/2024 - PDF - English - BSI
    Learn More
    €24.00

  • NBN EN 1594:2024

    Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
    3/6/2024 - PDF - English - NBN
    Learn More
    €184.00

  • NBN EN 1594:2024

    Gasinfrastruktur - Rohrleitungen für einen maximal zulässigen Betriebsdruck über 16 bar - Funktionale Anforderungen
    3/6/2024 - PDF - German - NBN
    Learn More
    €184.00

  • DIN CEN/TS 1455-2:2024-03

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity, German version CEN/TS 1455-2:2023.
    3/1/2024 - PDF - German - DIN
    Learn More
    €68.60

  • DIN EN 13476-1:2024-03

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characteristics, German and English version prEN 13476-1:2024
    3/1/2024 - PDF - English, German - DIN
    Learn More
    €92.62

  • DIN EN 13476-2:2024-03

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A, German and English version prEN 13476-2:2024
    3/1/2024 - PDF - English, German - DIN
    Learn More
    €131.96

  • DIN EN 13476-3:2024-03

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B, German and English version prEN 13476-3:2024
    3/1/2024 - PDF - English, German - DIN
    Learn More
    €131.96

  • 24/30481210 DC:2024

    BS EN 13476-1 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 1: General requirements performance characteristics
    2/15/2024 - PDF - English - BSI
    Learn More
    €24.00

  • 24/30481213 DC:2024

    BS EN 13476-2 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 2: Specifications pipes fittings with smooth internal external surface the system, Type A
    2/15/2024 - PDF - English - BSI
    Learn More
    €24.00

  • BS EN 13480-4:2017+A2:2023

    Metallic industrial piping Fabrication and installation
    2/12/2024 - PDF - English - BSI
    Learn More
    €348.00

  • ASTM F2769-24

    Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
    2/1/2024 - PDF - English - ASTM
    Learn More
    €66.00

  • ASTM F2769-24 + Redline

    Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
    2/1/2024 - PDF - English - ASTM
    Learn More
    €79.00

  • API RP 574:2024

    Inspection Practices for Piping System Components, Fifth Edition
    2/1/2024 - PDF sécurisé - English - API
    Learn More
    €268.00

  • API 570:2024

    Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems, Fifth Edition
    2/1/2024 - PDF sécurisé - English - API
    Learn More
    €230.00

  • PD CEN/TR 16395:2023 + Redline

    Tracked Changes. Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document
    1/17/2024 - PDF - English - BSI
    Learn More
    €235.00

  • FD CEN/TR 16395, M50-033 (01/2024)

    Infrastructures gazières - Définitions des pressions du CEN/TC 234 - Lignes directrices
    1/1/2024 - Paper - French - AFNOR
    Learn More
    €60.67

  • ASME B31.12-2023

    Hydrogen Piping and Pipelines
    12/29/2023 - Papier - English - ASME
    Learn More
    €428.00

  • UNE-EN 15001-1:2023

    Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
    12/27/2023 - PDF - Spanish - AENOR
    Learn More
    €156.00

  • UNE-EN 15001-1:2023

    Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
    12/27/2023 - PDF - English - AENOR
    Learn More
    €187.20

  • UNE-EN 1455-1:2023

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
    12/20/2023 - PDF - Spanish - AENOR
    Learn More
    €86.00

  • UNE-EN 1455-1:2023

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
    12/20/2023 - PDF - English - AENOR
    Learn More
    €103.20

  • UNE-EN 1566-1:2023

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
    12/20/2023 - PDF - Spanish - AENOR
    Learn More
    €89.00

  • UNE-EN 1566-1:2023

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
    12/20/2023 - PDF - English - AENOR
    Learn More
    €106.80

  • NBN EN 13480-4:2017/A2:2023

    Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation
    11/30/2023 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN 13480-4:2017/A2:2023

    Metallic industrial piping - Part 4: Fabrication and installation
    11/30/2023 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN 13480-4:2017/A1:2023

    Tuyauteries industrielles métalliques - Partie 4 : Fabrication et installation
    11/30/2023 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN 13480-4:2017/A1:2023

    Metallic industrial piping - Part 4: Fabrication and installation
    11/30/2023 - PDF - English - NBN
    Learn More
    €20.00

  • UNE-EN 14758-1:2023

    Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
    11/22/2023 - PDF - Spanish - AENOR
    Learn More
    €89.00

  • UNE-EN 14758-1:2023

    Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
    11/22/2023 - PDF - English - AENOR
    Learn More
    €106.80

  • PD CEN/TR 16395:2023

    Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document
    11/21/2023 - PDF - English - BSI
    Learn More
    €180.00

  • 22/30433302 DC:2023

    BS EN 805. Water supply. Requirements for systems and components outside buildings
    11/16/2023 - PDF - English - BSI
    Learn More
    €24.00

  • 23/30456484 DC:2023

    ISO 14617-2 Graphical symbols for diagrams Part 2.
    11/16/2023 - PDF - English - BSI
    Learn More
    €43.00

  • PD CEN/TS 1455-2:2023 + Redline

    Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Assessment of conformity
    11/6/2023 - PDF - English - BSI
    Learn More
    €326.00

  • 23/30478862 DC:2023

    BS EN 12100 Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports
    11/2/2023 - PDF - English - BSI
    Learn More
    €24.00

  • DIN EN 1455-1:2023-11

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system, German version EN 1455-1:2022
    11/1/2023 - PDF - German - DIN
    Learn More
    €104.95

  • DIN EN 1566-1:2023-11

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system, German version EN 1566-1:2022
    11/1/2023 - PDF - German - DIN
    Learn More
    €110.00

  • DIN EN 1401-1:2023-11

    Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system, German version EN 1401-1:2019+A1:2023
    11/1/2023 - PDF - German - DIN
    Learn More
    €115.33

  • DIN EN 12100:2023-11

    Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports, German and English version prEN 12100:2023
    11/1/2023 - PDF - English, German - DIN
    Learn More
    €59.63

  • ASTM A888-23

    Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
    11/1/2023 - PDF - English - ASTM
    Learn More
    €100.00

  • ASTM A888-23 + Redline

    Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
    11/1/2023 - PDF - English - ASTM
    Learn More
    €119.00

  • PD CEN/TS 1455-2:2023

    Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Assessment of conformity
    10/19/2023 - PDF - English - BSI
    Learn More
    €250.00

  • CEN/TS 1455-2:2023

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity
    10/18/2023 - PDF - English - NBN
    Learn More
    €121.00

  • CEN/TS 1566-2:2023

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity
    10/18/2023 - PDF - English - NBN
    Learn More
    €121.00

  • CEN/TS 1455-2:2023

    Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Acrylnitril-Butadien-Styrol (ABS) - Teil 2: Beurteilung der Konformität
    10/18/2023 - PDF - German - NBN
    Learn More
    €121.00

  • CEN/TS 1566-2:2023

    Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Chloriertes Polyvinylchlorid (PVC-C) - Teil 2: Beurteilung der Konformität
    10/18/2023 - PDF - German - NBN
    Learn More
    €121.00

  • DIN 2405:2023-10

    Pipelines in refrigerating systems and cooling equipment - Marking
    10/1/2023 - PDF - German - DIN
    Learn More
    €52.90

  • 23/30468072 DC:2023

    BS EN 15266. Stainless steel pliable corrugated tubing kits for gas installation pipework with an operating pressure up to 0,2 MPa (2 bar)
    9/14/2023 - PDF - English - BSI
    Learn More
    €24.00

  • DIN EN 15266:2023-09

    Stainless steel pliable corrugated tubing kits for gas installation pipework with an operating pressure up to 0,2 MPa (2 bar), German and English version prEN 15266:2023
    9/1/2023 - PDF - English, German - DIN
    Learn More
    €120.84

  • DIN CEN/TS 1519-2:2023-08

    Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1519-2:2020.
    8/1/2023 - PDF - German - DIN
    Learn More
    €63.64

  • DIN 21057-1:2023-08

    Pipe classes for process plants - Part 1: General - General principles for creating pipe classes
    8/1/2023 - PDF - German - DIN
    Learn More
    €92.62

  • DIN EN 17613:2023-08

    LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture, German version EN 17613:2022
    8/1/2023 - PDF - German - DIN
    Learn More
    €72.80

  • DIN EN 1519-1:2023-08

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system, German version EN 1519-1:2019 + AC:2021
    8/1/2023 - PDF - German - DIN
    Learn More
    €104.95

  • DIN EN 12007-5:2023-08

    Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements, German and English version prEN 12007-5:2023
    8/1/2023 - PDF - English, German - DIN
    Learn More
    €99.35

  • BS EN 1566-1:2022 + Redline

    Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Specifications pipes, fittings system
    6/8/2023 - PDF - English - BSI
    Learn More
    €432.00

  • DIN EN 17152-1:2023-06

    Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U, German version EN 17152-1:2019 + AC:2020
    6/1/2023 - PDF - German - DIN
    Learn More
    €85.79

  • PR NF EN 17928-2, M50-035-2PR (06/2023)

    Infrastructures gazières - Stations d'injection - Partie 2 : exigences spécifiques concernant l'injection de biométhane
    6/1/2023 - Paper - English, French - AFNOR
    Learn More
    €56.00

  • PR NF EN 12007-5, M50-005-5PR (06/2023)

    Infrastructures gazières - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 5 : Branchements - Recommandations fonctionnelles spécifiques
    6/1/2023 - Paper - English, French - AFNOR
    Learn More
    €107.50

  • PR NF EN 17928-1, M50-035-1PR (06/2023)

    Infrastructures gazières - Stations d'injection - Partie 1 : Exigences générales
    6/1/2023 - Paper - English, French - AFNOR
    Learn More
    €138.50

  • PR NF EN 17928-3, M50-035-3PR (06/2023)

    Infrastructures gazières - Stations d'injection - Partie 3 : exigences spécifiques concernant l'injection de gaz combustible hydrogène
    6/1/2023 - Paper - English, French - AFNOR
    Learn More
    €64.50

  • ASTM A961/A961M-23

    Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
    5/1/2023 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM A961/A961M-23 + Redline

    Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
    5/1/2023 - PDF - English - ASTM
    Learn More
    €65.00

  • 23/30468051 DC:2023

    BS EN 12007-5. Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Part 5. Service lines. Specific functional requirements
    4/17/2023 - PDF - English - BSI
    Learn More
    €24.00

  • NBN EN 1401-1:2019+A1:2023

    Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : Spécifications pour tubes, raccords et le système
    4/12/2023 - PDF - French - NBN
    Learn More
    €163.00

  • NBN EN 1401-1:2019+A1:2023

    Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    4/12/2023 - PDF - English - NBN
    Learn More
    €163.00

  • NBN EN 1401-1:2019+A1:2023

    Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
    4/12/2023 - PDF - German - NBN
    Learn More
    €163.00

  • 23/30453511 DC:2023

    BS 9295 AMD 1. Guide to the structural design of buried pipelines
    4/3/2023 - PDF - English - BSI
    Learn More
    €24.00

  • NF EN 1401-1/IN1, P16-352-1/IN1 (04/2023)

    Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : spécifications pour tubes, raccords et le système
    4/1/2023 - Paper - French - AFNOR
    Learn More
    €23.00

  • DIN EN 15001-2:2023-04

    Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance, German version EN 15001-2:2023.
    4/1/2023 - PDF - German - DIN
    Learn More
    €92.62

  • DIN EN 15001-1:2023-04

    Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing, German version EN 15001-1:2023.
    4/1/2023 - PDF - German - DIN
    Learn More
    €216.26

  • DIN EN 17649:2023-04

    Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements, German version EN 17649:2022.
    4/1/2023 - PDF - German - DIN
    Learn More
    €110.00

  • DIN EN 13480-3/A5:2023-04

    Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A5:2022
    4/1/2023 - PDF - German - DIN
    Learn More
    €79.72

  • NF EN 1401-1+A1, P16-352-1 (04/2023)

    Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : spécifications pour tubes, raccords et le système
    4/1/2023 - Paper - French - AFNOR
    Learn More
    €99.33

  • SAE AS 85421/11D:2023-03-23

    FITTING, UNION, BEAM SEAL, 3000/4000 PSI, MALE ENDS
    3/23/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE J 846:2023-03-23

    Coding Systems for Identification of Fluid Conductors and Connectors
    3/23/2023 - PDF - English - SAE
    Learn More
    €124.00

  • BS EN 1455-1:2022 + Redline

    Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Specifications pipes, fittings system
    3/21/2023 - PDF - English - BSI
    Learn More
    €382.00

  • BS EN 15001-1:2023 + Redline

    Tracked Changes. Gas Infrastructure. installation pipework with an operating pressure greater than 0,5 bar for industrial installations and 5 non-industrial Detailed functional requirements design, materials, construction, inspection testing
    3/15/2023 - PDF - English - BSI
    Learn More
    €586.00

  • BS EN 1566-1:2022

    Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Specifications pipes, fittings system
    3/13/2023 - PDF - English - BSI
    Learn More
    €331.00

  • BS EN 15001-2:2023 + Redline

    Tracked Changes. Gas supply systems. installation pipework with an operating pressure greater than 0,5 bar for industrial installations and 5 non-industrial Detailed functional requirements commissioning, operation maintenance
    3/10/2023 - PDF - English - BSI
    Learn More
    €326.00

  • BS EN 1455-1:2022

    Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Specifications pipes, fittings system
    3/9/2023 - PDF - English - BSI
    Learn More
    €293.00

  • BS EN 15001-1:2023

    Gas Infrastructure. installation pipework with an operating pressure greater than 0,5 bar for industrial installations and 5 non-industrial Detailed functional requirements design, materials, construction, inspection testing
    3/7/2023 - PDF - English - BSI
    Learn More
    €449.00

  • NBN EN 15001-1:2023

    Gasinfrastruktur - Gasleitungsanlagen mit einem Betriebsdruck größer 0,5 bar für industrielle Installationen und größer 5 bar für industrielle und nicht-industrielle Installationen - Teil 1: Detaillierte funktionale Anforderungen an Planung, Material, Bau, Inspektion und Prüfung
    3/2/2023 - PDF - German - NBN
    Learn More
    €205.00

  • NBN EN 15001-2:2023

    Infrastructures gazières - Canalisations d'installation de gaz avec une pression de service supérieure à 0,5 bar pour les installations industrielles et supérieure à 5 bar pour les installations industrielles et non industrielles - Partie 2 : Exigences fonctionnelles détaillées pour la mise en service, l'exploitation et la maintenance
    3/2/2023 - PDF - French - NBN
    Learn More
    €121.00

  • NBN EN 15001-2:2023

    Gasversorgungssysteme - Gasleitungsanlagen mit einem Betriebsdruck größer 0,5 bar für industrielle Installationen und größer 5 bar für industrielle und nicht-industrielle Installationen - Teil 2: Detaillierte funktionale Anforderungen an Inbetriebnahme, Betrieb und Instandhaltung
    3/2/2023 - PDF - German - NBN
    Learn More
    €121.00

  • NBN EN 15001-1:2023

    Infrastructures gazières - Canalisations d’installations de gaz avec une pression de service supérieure à 0,5 bar pour les installations industrielles et supérieure à 5 bar pour les installations industrielles et non industrielles (domestiques et commerciales) - Partie 1 : Exigences fonctionnelles détaillées relatives à la conception, aux matériaux, à la construction, à l'inspection et aux essais
    3/2/2023 - PDF - French - NBN
    Learn More
    €205.00

  • NBN EN 15001-1:2023

    Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
    3/2/2023 - PDF - English - NBN
    Learn More
    €205.00

  • NBN EN 15001-2:2023

    Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
    3/2/2023 - PDF - English - NBN
    Learn More
    €121.00

  • BS EN 15001-2:2023

    Gas supply systems. installation pipework with an operating pressure greater than 0,5 bar for industrial installations and 5 non-industrial Detailed functional requirements commissioning, operation maintenance
    2/28/2023 - PDF - English - BSI
    Learn More
    €250.00

  • NF EN 15001-1, M50-001-1 (02/2023)

    Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1 : Detailed functional requirements for design, materials, construction, inspection and testing - Infrastructures gazières - Canalisations d'installations de gaz avec une pression de service supérieure à 0,5 bar pour les installations industrielles et supérieure à 5 bar pour les installations industrielles et non industrielles (domestiques et commerciales) - Partie 1 : Exigences
    2/1/2023 - Paper - French - AFNOR
    Learn More
    €192.00

  • NF EN 15001-2, M50-001-2 (02/2023)

    Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2 : Detailed functional requirements for commissioning - Infrastructures gazières - Canalisations d'installation de gaz avec une pression de service supérieure à 0,5 bar pour les installations industrielles et supérieure à 5 bar pour les installations industrielles et non industrielles - Partie 2 : Exigences fonctionnelles détaillées pour la mise en
    2/1/2023 - Paper - French - AFNOR
    Learn More
    €86.67

  • ASTM C828-23

    Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
    2/1/2023 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM C828-23 + Redline

    Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
    2/1/2023 - PDF - English - ASTM
    Learn More
    €57.00

  • UNE-EN 17649:2023

    Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
    1/18/2023 - PDF - Spanish - AENOR
    Learn More
    €87.00

  • UNE-EN 17649:2023

    Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
    1/18/2023 - PDF - English - AENOR
    Learn More
    €104.40

  • BS EN 13480-3:2017+A5:2022

    Metallic industrial piping Design and calculation
    1/6/2023 - PDF - English - BSI
    Learn More
    €449.00

  • ASME B31.12-2023

    Hydrogen Piping and Pipelines
    1/1/2023 - PDF DRM - English - ASME
    Learn More
    €318.00

  • NBN EN 13480-3:2017/A5:2022

    Tuyauteries industrielles métalliques - Partie 3: Conception et calcul
    12/22/2022 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN 13480-3:2017/A5:2022

    Metallische industrielle Rohrleitungen - Teil 3: Konstruktion und Berechnung
    12/22/2022 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN 13480-3:2017/A5:2022

    Metallic industrial piping - Part 3: Design and calculation
    12/22/2022 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN 1566-1:2022

    Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
    12/15/2022 - PDF - French - NBN
    Learn More
    €163.00

  • NBN EN 1455-1:2022

    Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
    12/15/2022 - PDF - French - NBN
    Learn More
    €163.00

  • NBN EN 1566-1:2022

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
    12/15/2022 - PDF - English - NBN
    Learn More
    €163.00

  • NBN EN 1455-1:2022

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
    12/15/2022 - PDF - English - NBN
    Learn More
    €163.00

  • NBN EN 1566-1:2022

    Kunststoff- Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Chloriertes Polyvinylchlorid (PVC-C) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
    12/15/2022 - PDF - German - NBN
    Learn More
    €163.00

  • NBN EN 1455-1:2022

    Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Acrylnitril-Butadien-Styrol (ABS) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
    12/15/2022 - PDF - German - NBN
    Learn More
    €163.00

  • UNE-EN 17613:2022

    LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
    12/7/2022 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-EN 17613:2022

    LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
    12/7/2022 - PDF - English - AENOR
    Learn More
    €81.60

  • NF EN 1455-1, T54-914-1 (12/2022)

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1 : Requirements for pipes, fittings and the system - Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que
    12/1/2022 - Paper - French - AFNOR
    Learn More
    €108.33

  • NF EN 1566-1, T54-919-1 (12/2022)

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : Requirements for pipes, fittings and the system
    12/1/2022 - Paper - French - AFNOR
    Learn More
    €108.33

  • DIN EN ISO 11295:2022-12

    Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022), German version EN ISO 11295:2022
    12/1/2022 - PDF - German - DIN
    Learn More
    €163.74

  • CEN/TS 17152-3:2022

    Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme
    12/1/2022 - PDF - English - NBN
    Learn More
    €89.00

  • BS EN ISO 15874-2:2013+A2:2022

    Plastics piping systems for hot and cold water installations. Polypropylene (PP) Pipes
    11/2/2022 - PDF - English - BSI
    Learn More
    €250.00

  • PR NF EN 1594, NF EN 1594 (E) Prépublié/Prepublished (11/2022)

    Infrastructures gazières - Canalisation pour pression maximale de service supérieure à 16 bar - Prescriptions fonctionnelles
    11/1/2022 - Paper - English, French - AFNOR
    Learn More
    €148.00

  • DIN EN 1594:2022-11

    Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements, German and English version prEN 1594:2022
    11/1/2022 - PDF - English, German - DIN
    Learn More
    €152.71

  • SAE AS 85421/3D:2022-10-26

    FITTING, TEE, REDUCER, BEAM SEAL, 3000/4000 PSI, 3 MALE ENDS
    10/26/2022 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 85421/4F:2022-10-26

    FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN, SWIVEL NUT ON BRANCH
    10/26/2022 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 85421/5D:2022-10-26

    FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN AND BRANCH, SWIVEL NUT ON RUN
    10/26/2022 - PDF - English - SAE
    Learn More
    €47.00

  • BS EN ISO 15493:2003+A1:2017

    Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and the system. Metric series
    10/25/2022 - PDF - English - BSI
    Learn More
    €377.00

  • UNE-CEN/TS 17152-3:2022

    Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme (Endorsed by Asociación Española de Normalización in January of 2023.)
    10/12/2022 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN 13480-3:2017/A5:2022

    Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in February of 2023.)
    10/12/2022 - PDF - English - AENOR
    Learn More
    €69.00

  • UNE-EN ISO 11295:2022

    Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022)
    10/11/2022 - PDF - Spanish - AENOR
    Learn More
    €126.00

  • UNE-EN ISO 11295:2022

    Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022)
    10/11/2022 - PDF - English - AENOR
    Learn More
    €151.20

  • NF EN 14525, A48-881 (10/2022)

    Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials : ductile iron, Grey iron, Steel, PVC-U, PE, Fibre-cement
    10/1/2022 - Paper - French - AFNOR
    Learn More
    €99.33

  • ASTM B1020/B1020M-22

    Standard Specification for Seamless Nickel Alloy Mechanical Tubing and Hollow Bar
    10/1/2022 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM B1020/B1020M-22 + Redline

    Standard Specification for Seamless Nickel Alloy Mechanical Tubing and Hollow Bar
    10/1/2022 - PDF - English - ASTM
    Learn More
    €72.00

  • DIN EN 877:2022-10

    Cast iron pipes systems and their components for the evacuation of water from works - Characteristics and test methods, German version EN 877:2021
    10/1/2022 - PDF - German - DIN
    Learn More
    €136.82

  • DIN EN ISO 15874-1:2022-10

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013 + Amd 1:2022), German and English version EN ISO 15874-1:2013 + A1:2022
    10/1/2022 - PDF - English, German - DIN
    Learn More
    €85.79

  • UNE-EN ISO 21003-3:2009/A1:2022

    Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
    9/28/2022 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN ISO 21003-3:2009/A1:2022

    Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
    9/28/2022 - PDF - English - AENOR
    Learn More
    €72.00

  • UNE-EN ISO 22391-3:2010/A2:2022

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
    9/28/2022 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN ISO 22391-3:2010/A2:2022

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
    9/28/2022 - PDF - English - AENOR
    Learn More
    €72.00

  • BS EN 476:2022 + Redline

    Tracked Changes. General requirements for components used in drains and sewers
    9/13/2022 - PDF - English - BSI
    Learn More
    €382.00

  • BS EN 17613:2022

    LPG equipment and accessories. Composite piping for use with LPG in liquid phase and vapour pressure phase. Design and manufacture
    9/12/2022 - PDF - English - BSI
    Learn More
    €180.00

  • SAE J 1677:2022-09-08

    Tests and Procedures for Carbon Steel and High Strength, Low Alloy Steel Tubing
    9/8/2022 - PDF - English - SAE
    Learn More
    €75.00

  • BS EN 17649:2022

    Gas infrastructure. Safety Management System (SMS) and Pipeline Integrity Management System (PIMS). Functional requirements
    9/5/2022 - PDF - English - BSI
    Learn More
    €293.00

  • 22/30442410 DC:2022

    BS EN 1594. Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
    9/1/2022 - PDF - English - BSI
    Learn More
    €24.00

  • ASTM C12-22a

    Standard Practice for Installing Vitrified Clay Pipe Lines
    9/1/2022 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM C12-22a + Redline

    Standard Practice for Installing Vitrified Clay Pipe Lines
    9/1/2022 - PDF - English - ASTM
    Learn More
    €61.00

  • DVGW G 496:2022-09

    Piping in Compressor and Expansion Stations
    9/1/2022 - PDF - German - DVGW
    Learn More
    €65.18

  • BS EN ISO 15874-1:2013+A1:2022

    Plastics piping systems for hot and cold water installations. Polypropylene (PP) General
    8/31/2022 - PDF - English - BSI
    Learn More
    €180.00

  • NBN EN 17613:2022

    Équipements pour gaz de pétrole liquéfié et leurs accessoires - Canalisations composites pour GPL en phase liquide et phase vapeur - Conception et fabrication
    8/4/2022 - PDF - French - NBN
    Learn More
    €89.00

  • NBN EN 17613:2022

    Flüssiggas-Geräte und Ausrüstungsteile - Verrohrung aus Verbundwerkstoffen zum Einsatz mit LPG in der Flüssig- und Dampfdruck-Phase - Auslegung und Herstellung
    8/4/2022 - PDF - German - NBN
    Learn More
    €89.00

  • NBN EN 17649:2022

    Infrastructures gazières - Système de management de la sécurité (SMS) et système de management de l’intégrité des canalisations (PIMS) - Exigences fonctionnelles
    8/4/2022 - PDF - French - NBN
    Learn More
    €163.00

  • NBN EN 17649:2022

    Gasinfrastruktur - Sicherheitsmanagementsystem und Rohrleitungsintegritätsmanagementsystem - Funktionale Anforderungen
    8/4/2022 - PDF - German - NBN
    Learn More
    €163.00

  • NBN EN 17649:2022

    Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
    8/4/2022 - PDF - English - NBN
    Learn More
    €163.00

  • NBN EN 17613:2022

    LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
    8/4/2022 - PDF - English - NBN
    Learn More
    €89.00

  • NF EN 17649, M50-034 (08/2022)

    Infrastructures gazières - Système de management de la sécurité (SMS) et système de management de l'intégrité des canalisations (PIMS) - Exigences fonctionnelles
    8/1/2022 - Paper - French - AFNOR
    Learn More
    €108.33

  • NF EN 17613, M88-764 (08/2022)

    Equipements pour gaz de pétrole liquéfié et leurs accessoires - Canalisations composites pour GPL en phase liquide et phase vapeur - Conception et fabrication
    8/1/2022 - Paper - French - AFNOR
    Learn More
    €75.67

  • DIN CEN/TR 13480-7:2022-08

    Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures, German version CEN/TR 13480-7:2022
    8/1/2022 - PDF - German - DIN
    Learn More
    €68.60

  • UNE 53929:2022

    Plastics. Rehabilitation of supply and sewerage pipes with continuous cured tubes in situ (CIPP). Design, calculation and installation
    7/20/2022 - PDF - Spanish - AENOR
    Learn More
    €93.00

  • ASTM F1901-22

    Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
    7/1/2022 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM F1901-22 + Redline

    Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
    7/1/2022 - PDF - English - ASTM
    Learn More
    €61.00

  • UNE-EN 877:2022

    Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
    6/8/2022 - PDF - Spanish - AENOR
    Learn More
    €103.00

  • UNE-EN 877:2022

    Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
    6/8/2022 - PDF - English - AENOR
    Learn More
    €123.60

  • UNE-EN 15632-4:2022

    District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes, requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
    6/1/2022 - PDF - English - AENOR
    Learn More
    €60.00

  • UNE-EN 15632-1:2022

    District heating pipes - Factory made flexible pipe systems - Part 1: Classification, general requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
    6/1/2022 - PDF - English - AENOR
    Learn More
    €72.00

  • UNE-EN 15632-2:2022

    District heating pipes - Factory made flexible pipe systems - Part 2: Bonded system with plastic service pipes, requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
    6/1/2022 - PDF - English - AENOR
    Learn More
    €65.00

  • UNE-EN 15632-3:2022

    District heating pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes, requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
    6/1/2022 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN 13476-2:2019+A1:2022

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
    5/25/2022 - PDF - Spanish - AENOR
    Learn More
    €101.00

  • UNE-EN 13476-2:2019+A1:2022

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
    5/25/2022 - PDF - English - AENOR
    Learn More
    €121.20

  • UNE-EN 13476-3:2019+A1:2022

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
    5/25/2022 - PDF - Spanish - AENOR
    Learn More
    €102.00

  • UNE-EN 13476-3:2019+A1:2022

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
    5/25/2022 - PDF - English - AENOR
    Learn More
    €122.40

  • BS EN 476:2022

    General requirements for components used in drains and sewers
    5/13/2022 - PDF - English - BSI
    Learn More
    €293.00

  • BS EN 877:2021 + Redline

    Tracked Changes. Cast iron pipe systems and their components for the evacuation of water from works. characteristics and test methods
    5/11/2022 - PDF - English - BSI
    Learn More
    €454.00

  • UNE-EN 1555-1:2022

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
    5/11/2022 - PDF - Spanish - AENOR
    Learn More
    €70.00

  • UNE-EN 1555-1:2022

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
    5/11/2022 - PDF - English - AENOR
    Learn More
    €84.00

  • UNE-EN 1555-5:2022

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
    5/11/2022 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-EN 1555-5:2022

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
    5/11/2022 - PDF - English - AENOR
    Learn More
    €81.60

  • SAE AS 85421/2C:2022-05-09

    FITTING END, STANDARD DIMENSIONS FOR, BULKHEAD, DYNAMIC BEAM SEAL, MALE
    5/9/2022 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 85421/1A:2022-05-02

    FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE
    5/2/2022 - PDF - English - SAE
    Learn More
    €54.00

  • BS EN ISO 11295:2022 + Redline

    Tracked Changes. Plastics piping systems used for the rehabilitation of pipelines. Classification and overview of strategic, tactical and operational activities
    4/8/2022 - PDF - English - BSI
    Learn More
    €492.00

  • NF EN 476, P16-100 (04/2022)

    General requirements for components used in drains and sewers
    4/1/2022 - Paper - French - AFNOR
    Learn More
    €86.67

  • BS EN ISO 11295:2022

    Plastics piping systems used for the rehabilitation of pipelines. Classification and overview of strategic, tactical and operational activities
    4/1/2022 - PDF - English - BSI
    Learn More
    €377.00

  • UNE-CEN/TS 1555-7:2021

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in April of 2022.)
    4/1/2022 - PDF - English - AENOR
    Learn More
    €78.00

  • BS EN ISO 15874-3:2013+A2:2021

    Plastics piping systems for hot and cold water installations. Polypropylene (PP) Fittings
    3/21/2022 - PDF - English - BSI
    Learn More
    €293.00

  • BS EN 13480-5:2017+A2:2021

    Metallic industrial piping Inspection and testing
    3/11/2022 - PDF - English - BSI
    Learn More
    €331.00

  • BS EN 13480-2:2017+A8:2021

    Metallic industrial piping Materials
    3/11/2022 - PDF - English - BSI
    Learn More
    €398.00

  • DIN CEN/TS 1555-7:2022-03

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity, German version CEN/TS 1555-7:2021
    3/1/2022 - PDF - German - DIN
    Learn More
    €92.43

  • PD CEN/TS 1555-7:2021 + Redline

    Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance assessment conformity
    2/25/2022 - PDF - English - BSI
    Learn More
    €432.00

  • NBN EN ISO 11295:2022

    Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022)
    2/12/2022 - PDF - French - NBN
    Learn More
    €184.00

  • NBN EN ISO 11295:2022

    Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022)
    2/12/2022 - PDF - English - NBN
    Learn More
    €184.00

  • NBN EN ISO 11295:2022

    Kunststoff-Rohrleitungssysteme, die für die Sanierung verwendet werden - Klassifizierung und Überblick über strategische, taktische und operative Aktivitäten (ISO 11295:2022)
    2/12/2022 - PDF - German - NBN
    Learn More
    €184.00

  • DIN EN 15542:2022-02

    Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods, German and English version prEN 15542:2021
    2/1/2022 - PDF - English, German - DIN
    Learn More
    €72.80

  • PD CEN/TS 1555-7:2021

    Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance assessment conformity
    1/21/2022 - PDF - English - BSI
    Learn More
    €331.00

  • SAE J 2593:2022-01-21

    Information Report for the Installation of Fluid Conductors and Connectors
    1/21/2022 - PDF - English - SAE
    Learn More
    €129.00

  • ASME B31.3-2022

    Process Piping
    1/1/2022 - Papier - English - ASME
    Learn More
    €722.00

  • DIN EN ISO 15877-3:2022-01

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2009 + Amd 1:2010 + Amd 2:2021), German and English version EN ISO 15877-3:2009 + A1:2010 + A2:2021.
    1/1/2022 - PDF - English, German - DIN
    Learn More
    €126.26

  • DVGW G 498:2022-01

    Druckbehälter in Rohrleitungen und Anlagen zur leitungsgebundenen Versorgung der Allgemeinheit mit Gas und Wasserstoff
    1/1/2022 - PDF - German - DVGW
    Learn More
    €83.30

  • CEN/TS 1555-7:2021

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
    12/24/2021 - PDF - German - NBN
    Learn More
    €163.00

  • CEN/TS 1555-7:2021

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
    12/24/2021 - PDF - English - NBN
    Learn More
    €163.00

  • 21/30426405 DC:2021

    BS EN 15542. Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods
    12/16/2021 - PDF - English - BSI
    Learn More
    €24.00

  • DIN EN 1555-5:2021-12

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system, German version EN 1555-5:2021.
    12/1/2021 - PDF - German - DIN
    Learn More
    €72.80

  • DIN EN 1555-1:2021-12

    Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General, German version EN 1555-1:2021.
    12/1/2021 - PDF - German - DIN
    Learn More
    €85.79

  • DIN EN 13480-2/A8:2021-12

    Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A8:2021
    12/1/2021 - PDF - German - DIN
    Learn More
    €45.98

  • DIN EN 13480-5/A2:2021-12

    Metallic industrial piping - Part 5: Inspection and testing, German version EN 13480-5:2017/A2:2021
    12/1/2021 - PDF - German - DIN
    Learn More
    €39.35

Items 1 to 200 of 1140 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6