23.040 : Pipeline components and pipelines
-
NBN EN ISO 15874-3:2013/A2:2021
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
10/29/2021 - PDF - English -
Learn More€20.00 -
NBN EN ISO 15874-3:2013/A2:2021
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
10/29/2021 - PDF - French -
Learn More€20.00 -
NBN EN 877:2021
Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
10/29/2021 - PDF - French -
Learn More€184.00 -
NBN EN ISO 21003-3:2008/A1:2021
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
10/29/2021 - PDF - English -
Learn More€20.00 -
NBN EN ISO 15875-3:2003/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
10/29/2021 - PDF - German -
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
10/29/2021 - PDF - French -
Learn More€20.00 -
NBN EN ISO 15875-3:2003/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
10/29/2021 - PDF - English -
Learn More€20.00 -
NBN EN ISO 22391-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
10/29/2021 - PDF - English -
Learn More€20.00 -
NBN EN ISO 21003-3:2008/A1:2021
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
10/29/2021 - PDF - French -
Learn More€20.00 -
NBN EN ISO 15874-3:2013/A2:2021
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
10/29/2021 - PDF - German -
Learn More€20.00 -
NBN EN 877:2021
Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
10/29/2021 - PDF - English -
Learn More€184.00 -
NBN EN ISO 22391-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
10/29/2021 - PDF - French -
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
10/29/2021 - PDF - English -
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
10/29/2021 - PDF - German -
Learn More€20.00 -
€109.00 -
UNE-EN ISO 11299-2:2021
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
10/27/2021 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 11299-3:2021
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
10/27/2021 - PDF - Spanish -
Learn More€71.00 -
UNE-EN ISO 11299-1:2021
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
10/27/2021 - PDF - Spanish -
Learn More€70.00 -
UNE-EN ISO 11299-2:2021
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
10/27/2021 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 11299-3:2021
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
10/27/2021 - PDF - English -
Learn More€85.20 -
UNE-EN ISO 11299-1:2021
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
10/27/2021 - PDF - English -
Learn More€84.00 -
ASTM B483/B483M-21 + Redline
Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
10/22/2021 - PDF - English -
Learn More€68.00 -
NBN/DTD B 21-106:2021
Concrete pipes and fittings, unreinforced, steel fibre and reinforced - National supplement to NBN EN 1916:2002
10/22/2021 - PDF - French -
Learn More€121.00 -
NBN/DTD B 21-106:2021
Concrete pipes and fittings, unreinforced, steel fibre and reinforced - National supplement to NBN EN 1916:2002
10/22/2021 - PDF - Dutch -
Learn More€121.00 -
ASTM B483/B483M-21
Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
10/22/2021 - PDF - English -
Learn More€57.00 -
BS EN ISO 19879:2021 + Redline
Tracked Changes. Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
10/21/2021 - PDF - English -
Learn More€326.00 -
UNE-EN 1515-4:2021
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
10/20/2021 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 1515-4:2021
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
10/20/2021 - PDF - English -
Learn More€81.60 -
NBN EN ISO 15877-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
10/16/2021 - PDF - German -
Learn More€20.00 -
€20.00
-
NBN EN ISO 15877-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
10/16/2021 - PDF - English -
Learn More€20.00 -
NBN EN ISO 15877-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
10/16/2021 - PDF - French -
Learn More€20.00 -
€20.00
-
€20.00
-
€20.00
-
€20.00
-
€20.00
-
BS ISO 7432:2021 + Redline
Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
10/4/2021 - PDF - English -
Learn More€326.00 -
DIN EN 1254-20:2021-10
Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information, German version EN 1254-20:2021
10/1/2021 - PDF - German -
Learn More€141.96 -
DVGW G 463:2021-10
High Pressure Gas Steel Pipelines for a Design Pressure of More Than 16 bar, Design and Construction
10/1/2021 - - -
Learn MoreFrom: €88.96 -
NF EN ISO 15876-3/A2, T54-944-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : Fittings - Amendment 2 (ISO 15876-3:2017/DAM 2:2020)
10/1/2021 - Paper - French -
Learn More€43.50 -
NF EN ISO 15877-3/A2, T54-014-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3 : Fittings - Amendment 2
10/1/2021 - Paper - French -
Learn More€75.67 -
NF M88-780 (10/2021)
Installations for liquified hydrocarbons in containers - Corrugated, metallic, flexible piping of LPG domestic appliances for operating pressures up to 20 bar
10/1/2021 - Paper - French -
Learn More€86.67 -
DIN EN ISO 10619-2:2021-10
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021), German version EN ISO 10619-2:2021
10/1/2021 - PDF - German -
Learn More€72.80 -
NF EN ISO 22391-3/A2, T54-982-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : Fittings - Amendment 2
10/1/2021 - Paper - French -
Learn More€60.67 -
DIN EN 1254-2:2021-10
Copper and copper alloys - Plumbing fittings - Part 2: Compression fittings for use with copper tubes, German version EN 1254-2:2021
10/1/2021 - PDF - German -
Learn More€92.62 -
DIN EN 1254-4:2021-10
Copper and copper alloys - Plumbing fittings - Part 4: Threaded fittings, German version EN 1254-4:2021
10/1/2021 - PDF - German -
Learn More€79.72 -
UNE-EN 17415-2:2021
District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 2: Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene (Endorsed by Asociación Española de Normalización in October of 2021.)
10/1/2021 - PDF - English -
Learn More€74.00 -
NF EN ISO 15874-3/A2, T54-938-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : Fittings - Amendment 2 (ISO 15874-3:2013/DAM 2:2020)
10/1/2021 - Paper - French -
Learn More€48.00 -
NF EN ISO 21003-3/A1, T54-952-3/A1 (10/2021)
Multilayer piping systems for hot and cold water installations inside buildings - Part 3 : Fittings - Amendment 1 (ISO 21003-3:2008/DAM 1:2020)
10/1/2021 - Paper - French -
Learn More€48.00 -
DVGW G 452-1:2021-10
Tapping and Stopping-Off - Part 1: Tapping and Plugging of Gas Steel Pipelines
10/1/2021 - PDF - German -
Learn More€65.18 -
DIN EN 1254-8:2021-10
Copper and copper alloys - Plumbing fittings - Part 8: Press fittings for use with plastics and multilayer pipes, German version EN 1254-8:2021
10/1/2021 - PDF - German -
Learn More€99.35 -
DIN EN 10374:2021-10
Welded fittings for the food and chemical industries - Tees, bends and reducers for welding, German version EN 10374:2021
10/1/2021 - PDF - German -
Learn More€104.95 -
€48.00
-
NF EN 877, A48-720 (10/2021)
Cast iron pipes systems for the evacuation of water from works - Characteristics and test methods
10/1/2021 - Paper - French -
Learn More€130.67 -
DIN EN 1254-1:2021-10
Copper and copper alloys - Plumbing fittings - Part 1: Capillary fittings for soldering or brazing to copper tubes, German version EN 1254-1:2021
10/1/2021 - PDF - German -
Learn More€92.62 -
DIN EN 1254-5:2021-10
Copper and copper alloys - Plumbing fittings - Part 5: Capillary fittings with short ends for brazing to copper tubes, German version EN 1254-5:2021
10/1/2021 - PDF - German -
Learn More€92.62 -
UNE-EN 17415-3:2021
District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 3: Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene (Endorsed by Asociación Española de Normalización in October of 2021.)
10/1/2021 - PDF - English -
Learn More€72.00 -
NF EN ISO 15875-3/A2, T54-943-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3 : Fittings - Amendment 2 (ISO 15875-3:2003/DAM 2:2020)
10/1/2021 - Paper - French -
Learn More€48.00 -
NF EN 13480-5/A2, E86-700-5/A2 (10/2021)
Metallic industrial piping - Part 5 : Inspection and testing
10/1/2021 - Paper - French -
Learn More€31.00 -
DIN EN 1254-7:2021-10
Copper and copper alloys - Plumbing fittings - Part 7: Press fittings for use with metallic tubes, German version EN 1254-7:2021
10/1/2021 - PDF - German -
Learn More€99.35 -
DIN EN ISO 21012:2021-10
Cryogenic vessels - Hoses (ISO/DIS 21012:2021), German and English version prEN ISO 21012:2021
10/1/2021 - PDF - English, German -
Learn More€92.62 -
DIN EN 1254-6:2021-10
Copper and copper alloys - Plumbing fittings - Part 6: Push-fit fittings for use with metallic tubes, plastics and multilayer pipes, German version EN 1254-6:2021
10/1/2021 - PDF - German -
Learn More€99.35 -
UNE-EN ISO 15875-2:2004/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
9/29/2021 - PDF - English -
Learn More€58.80 -
UNE-EN ISO 15875-3:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
9/29/2021 - PDF - Spanish -
Learn More€39.00 -
UNE-EN ISO 15877-2:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
9/29/2021 - PDF - Spanish -
Learn More€39.00 -
UNE-EN ISO 22391-2:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
9/29/2021 - PDF - English -
Learn More€46.80 -
UNE-EN ISO 15876-5:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish -
Learn More€39.00 -
UNE-EN ISO 15876-2:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
9/29/2021 - PDF - English -
Learn More€46.80 -
UNE-EN ISO 15875-5:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
9/29/2021 - PDF - Spanish -
Learn More€49.00 -
UNE-EN ISO 15877-5:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
9/29/2021 - PDF - English -
Learn More€55.20 -
UNE-EN ISO 22391-5:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
9/29/2021 - PDF - Spanish -
Learn More€46.00 -
UNE-EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish -
Learn More€34.00 -
UNE-EN ISO 15875-3:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
9/29/2021 - PDF - English -
Learn More€46.80 -
UNE-EN ISO 15494:2019/A1:2021
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
9/29/2021 - PDF - Spanish -
Learn More€39.00 -
UNE-EN ISO 15877-2:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
9/29/2021 - PDF - English -
Learn More€46.80 -
UNE-EN ISO 22391-3:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
9/29/2021 - PDF - Spanish -
Learn More€34.00 -
UNE-EN ISO 15875-2:2004/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
9/29/2021 - PDF - Spanish -
Learn More€49.00 -
UNE-EN ISO 15876-5:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
9/29/2021 - PDF - English -
Learn More€46.80 -
UNE-EN ISO 15875-5:2004/A1:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
9/29/2021 - PDF - English -
Learn More€58.80 -
UNE-EN ISO 22391-2:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
9/29/2021 - PDF - Spanish -
Learn More€39.00 -
UNE-EN ISO 22391-5:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
9/29/2021 - PDF - English -
Learn More€55.20 -
UNE-EN ISO 15876-3:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
9/29/2021 - PDF - English -
Learn More€40.80 -
UNE-EN ISO 15876-2:2017/A1:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
9/29/2021 - PDF - Spanish -
Learn More€39.00 -
UNE-EN ISO 15494:2019/A1:2021
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
9/29/2021 - PDF - English -
Learn More€46.80 -
UNE-EN ISO 15877-5:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
9/29/2021 - PDF - Spanish -
Learn More€46.00 -
UNE-EN ISO 22391-3:2010/A1:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
9/29/2021 - PDF - English -
Learn More€40.80 -
€20.00
-
€20.00
-
€20.00
-
NBN T 41-103:2021
Glass-reinforced thermosetting plastics (GRP) piping systems based on unsaturated polyester resin (UP) ? Jacking and relining pipes - Specifications
9/21/2021 - PDF - French -
Learn More€89.00 -
NBN T 41-103:2021
Glass-reinforced thermosetting plastics (GRP) piping systems based on unsaturated polyester resin (UP) ? Jacking and relining pipes - Specifications
9/21/2021 - PDF - Dutch -
Learn More€89.00 -
BS EN 17415-2:2021
District cooling pipes. Bonded single pipe systems for directly buried cold water networks Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation and a casing polyethylene
9/7/2021 - PDF - English -
Learn More€293.00 -
BS EN 17415-3:2021
District cooling pipes. Bonded single pipe systems for directly buried cold water networks Factory made steel valve assembly or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
9/7/2021 - PDF - English -
Learn More€293.00 -
NBN EN 17415-3:2021
District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 3: Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
9/3/2021 - PDF - French -
Learn More€142.00 -
NBN EN 17415-2:2021
District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 2: Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
9/3/2021 - PDF - English -
Learn More€142.00 -
NBN EN 17415-2:2021
District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 2: Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
9/3/2021 - PDF - French -
Learn More€142.00 -
NBN EN 17415-3:2021
District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 3: Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
9/3/2021 - PDF - German -
Learn More€142.00 -
NBN EN 17415-2:2021
District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 2: Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
9/3/2021 - PDF - German -
Learn More€142.00 -
NBN EN 17415-3:2021
District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 3: Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
9/3/2021 - PDF - English -
Learn More€142.00 -
NF EN 17415-3, E39-020-3 (09/2021)
District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 3 : Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
9/1/2021 - Paper - French -
Learn More€86.67 -
ASTM D3965-21 + Redline
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
9/1/2021 - PDF - English -
Learn More€53.00 -
UNE-CEN/TS 1046:2021
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation (Endorsed by Asociación Española de Normalización in September of 2021.)
9/1/2021 - PDF - English -
Learn More€72.00 -
ASTM C822-21 + Redline
Standard Terminology Relating to Concrete Pipe and Related Products
9/1/2021 - PDF - English -
Learn More€61.00 -
€53.00 -
ASTM F1200-21a
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F (1 MPa and 65°C))
9/1/2021 - PDF - English -
Learn More€46.00 -
NF ISO 21051, A48-051 (09/2021)
Construction and installation of ductile iron pipeline system
9/1/2021 - Paper - French -
Learn More€130.67 -
€48.00
-
ASTM A847/A847M-21 + Redline
Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
9/1/2021 - PDF - English -
Learn More€61.00 -
NF EN 17415-2, E39-020-2 (09/2021)
Réseaux d'eau glacée - Systèmes bloqués de tuyaux pour les réseaux d'eau glacée enterrés directement - Partie 2 : assemblages de raccords manufacturés pour tubes de service en acier ou en plastique, isolation thermique en polyuréthane et tube de protection en polyéthylène
9/1/2021 - Paper - French -
Learn More€99.33 -
ASTM F1199-21
Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
9/1/2021 - PDF - English -
Learn More€46.00 -
ASTM D3965-21
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
9/1/2021 - PDF - English -
Learn More€46.00 -
€34.67
-
ASTM C822-21
Standard Terminology Relating to Concrete Pipe and Related Products
9/1/2021 - PDF - English -
Learn More€51.00 -
ASTM F1200-21a + Redline
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F (1 MPa and 65°C))
9/1/2021 - PDF - English -
Learn More€53.00 -
€46.00
-
ASTM F1199-21 + Redline
Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
9/1/2021 - PDF - English -
Learn More€53.00 -
ASTM A847/A847M-21
Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
9/1/2021 - PDF - English -
Learn More€51.00 -
BS EN 10253-2:2021
Butt-welding pipe fittings Non alloy and ferritic steels with specific inspection requirements
8/31/2021 - PDF - English -
Learn More€449.00 -
€449.00 -
NBN EN 10374:2021
Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
8/27/2021 - PDF - German -
Learn More€163.00 -
NBN EN 10374:2021
Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
8/27/2021 - PDF - English -
Learn More€163.00 -
NBN EN 10374:2021
Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
8/27/2021 - PDF - French -
Learn More€163.00 -
BS EN ISO 10619-2:2021
Rubber and plastics hoses tubing. Measurement of flexibility stiffness Bending tests at sub-ambient temperatures
8/27/2021 - PDF - English -
Learn More€180.00 -
PD ISO/TR 10358:2021
Plastics pipes and fittings for industrial applications. Collection of data on combined chemical-resistance
8/27/2021 - PDF - English -
Learn More€449.00 -
BS EN 1555-5:2021
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fitness purpose system
8/26/2021 - PDF - English -
Learn More€180.00 -
BS EN 1555-3:2021
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
8/26/2021 - PDF - English -
Learn More€293.00 -
BS EN 1555-2:2021
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes
8/26/2021 - PDF - English -
Learn More€293.00 -
BS EN 1555-1:2021
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
8/25/2021 - PDF - English -
Learn More€250.00 -
BS 5911-1:2021
Concrete pipes and ancillary concrete Unreinforced reinforced (including jacking pipes) fittings with flexible joints (complementary to BS EN 1916:2002). Specification
8/13/2021 - PDF - English -
Learn More€250.00 -
NBN EN 10253-2:2021
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
8/13/2021 - PDF - English -
Learn More€205.00 -
NBN EN 10253-2:2021
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
8/13/2021 - PDF - French -
Learn More€205.00 -
NBN EN 10253-2:2021
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
8/13/2021 - PDF - German -
Learn More€205.00 -
PD ISO/TS 10986:2021
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. System design of above ground pipe and joint installations without end thrust
8/12/2021 - PDF - English -
Learn More€331.00 -
21/30429644 DC:2021
BS EN ISO 13844. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
8/11/2021 - PDF - English -
Learn More€24.00 -
DVGW C 260:2021-08
Eigenschaften von Kohlenstoffdioxid und Kohlenstoffdioxidströmen
8/10/2021 - PDF - German -
Learn More€65.18 -
ASTM F2390-21 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
8/1/2021 - PDF - English -
Learn More€61.00 -
ASTM F1947-21a
Standard Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
8/1/2021 - PDF - English -
Learn More€51.00 -
ASTM A501/A501M-21
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
8/1/2021 - PDF - English -
Learn More€51.00 -
ASTM F1504-21e1
Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
8/1/2021 - PDF - English -
Learn More€51.00 -
DVGW C 463:2021-08
Kohlenstoffdioxidleitungen aus Stahlrohren - Planung und Errichtung
8/1/2021 - PDF - German -
Learn More€65.18 -
DVGW GW 9:2021-08
Assessment of Corrosion Loads on Buried Pipelines and Tanks Made of Unalloyed Low-alloyed Ferrous Materials in Soils
8/1/2021 - PDF - German -
Learn More€72.46 -
DIN EN ISO 1402:2021-08
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2021), German version EN ISO 1402:2021
8/1/2021 - PDF - German -
Learn More€72.80 -
ASTM D1785-21a
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
8/1/2021 - PDF - English -
Learn More€57.00 -
ASTM A618/A618M-21
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
8/1/2021 - PDF - English -
Learn More€51.00 -
ASTM F1947-21a + Redline
Standard Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
8/1/2021 - PDF - English -
Learn More€61.00 -
DIN 8541-2:2021-08
Hoses for welding, cutting and allied processes - Part 2: Hoses with coatings for fuel gas, oxygen and other non combustible gases.
8/1/2021 - PDF - German -
Learn More€45.98 -
€116.35
-
ASTM A501/A501M-21 + Redline
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
8/1/2021 - PDF - English -
Learn More€61.00 -
ASTM F1504-21e1 + Redline
Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
8/1/2021 - PDF - English -
Learn More€61.00 -
ASTM F2390-21
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
8/1/2021 - PDF - English -
Learn More€51.00 -
ASTM D1785-21a + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
8/1/2021 - PDF - English -
Learn More€68.00 -
ASTM A618/A618M-21 + Redline
Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
8/1/2021 - PDF - English -
Learn More€61.00 -
NF EN 10374, A49-261 (08/2021)
Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
8/1/2021 - Paper - French -
Learn More€99.33 -
DIN 11867:2021-08
Stainless steel components for aseptic applications in the chemical and the pharmaceutical industries - Elbows for pigging systems
8/1/2021 - PDF - German -
Learn More€79.72 -
DIN EN ISO 7233:2021-08
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021), German version EN ISO 7233:2021
8/1/2021 - PDF - German -
Learn More€52.90 -
NF EN 10253-2, A49-170-2 (08/2021)
Raccords à souder bout à bout - Partie 2 : aciers non alliés et aciers ferritiques alliés avec contrôle spécifique
8/1/2021 - Paper - French -
Learn More€192.00 -
€205.00
-
€205.00
-
€205.00
-
BS ISO 19220:2021
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings. Styrene copolymer blends (SAN + PVC)
7/29/2021 - PDF - English -
Learn More€293.00 -
UNE-EN 13555:2021
Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
7/28/2021 - PDF - Spanish -
Learn More€85.00 -
UNE-EN 13555:2021
Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
7/28/2021 - PDF - English -
Learn More€102.00 -
NBN EN ISO 10619-2:2021
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
7/16/2021 - PDF - French -
Learn More€58.00 -
NBN EN ISO 10619-2:2021
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
7/16/2021 - PDF - German -
Learn More€58.00 -
NBN EN ISO 10619-2:2021
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
7/16/2021 - PDF - English -
Learn More€58.00 -
21/30437411 DC:2021
BS EN 14161. Petroleum and natural gas industries. Pipeline transportation systems (ISO 13623:2017, modified)
7/15/2021 - PDF - English -
Learn More€24.00 -
21/30437402 DC:2021
BS EN 14870-1. Petroleum and natural gas industries. Induction bends, fittings flanges for pipeline transportation systems Part 1. bends
7/15/2021 - PDF - English -
Learn More€24.00 -
UNE 53331:2021
Plastics. Unplasticized poly(vinyl chloride), oriented unplasticized poly(vinyl chloride) (PVC-O), polyethylene (PE) and polypropylene (PP) pipes. Criterion for the assessment of pipes for plastics piping systems with car without pressure under external loads.
7/14/2021 - PDF - Spanish -
Learn More€102.00 -
NBN EN 1555-1:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
7/11/2021 - PDF - English -
Learn More€121.00 -
NBN EN 1555-5:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
7/11/2021 - PDF - German -
Learn More€89.00 -
NBN EN 1555-2:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
7/11/2021 - PDF - French -
Learn More€121.00 -
NBN EN 1555-3:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
7/11/2021 - PDF - German -
Learn More€142.00 -
NBN EN 1555-1:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
7/11/2021 - PDF - French -
Learn More€121.00 -
NBN EN 1555-5:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
7/11/2021 - PDF - English -
Learn More€89.00 -
NBN EN 1555-2:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
7/11/2021 - PDF - German -
Learn More€121.00 -
NBN EN 1555-3:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
7/11/2021 - PDF - English -
Learn More€142.00 -
NBN EN 1555-1:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
7/11/2021 - PDF - German -
Learn More€121.00 -
NBN EN 1555-5:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
7/11/2021 - PDF - French -
Learn More€89.00 -
NBN EN 1555-3:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
7/11/2021 - PDF - French -
Learn More€142.00 -
NBN EN 1555-2:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
7/11/2021 - PDF - English -
Learn More€121.00 -
BS EN ISO 23856:2021
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
7/9/2021 - PDF - English -
Learn More€377.00 -
NBN EN ISO 23856:2021
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
7/5/2021 - PDF - English -
Learn More€184.00 -
NBN EN ISO 23856:2021
Kunststoff-Rohrleitungssysteme für Wasserversorgung, Entwässerungssysteme und Abwasserleitungen mit und ohne Druck - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf der Basis von ungesättigtem Polyesterharz (UP) (ISO 23856:2021)
7/5/2021 - PDF - German -
Learn More€184.00 -
NBN EN ISO 23856:2021
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
7/5/2021 - PDF - French -
Learn More€184.00 -
€247.00
-
PR NF EN ISO 15493/A11, T54-947/A11PR (07/2021)
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003/Amd 1:2016 + Cor 1:2004) - Systèmes de canalisations en matières plastiques pour les applications industrielles - Acrylonitrile-butadiène-styrène (ABS), poly(chlorure de vinyle) non plastifié (PVC-U) et poly(chlorure de vinyle) chloré (PVC-C) - Spécifications pour les composants et le système - Série métrique (ISO
7/1/2021 - Paper - English, French -
Learn More€45.00 -
ASTM F1804-21
Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
7/1/2021 - PDF - English -
Learn More€46.00 -
ASTM F1698-21
Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
7/1/2021 - PDF - English -
Learn More€51.00 -
ASTM D3350-21
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
7/1/2021 - PDF - English -
Learn More€51.00 -
NF EN 1555-4, T54-065-4 (07/2021)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : Valves
7/1/2021 - Paper - French -
Learn More€86.67 -
ASTM F2785-21 + Redline
Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
7/1/2021 - PDF - English -
Learn More€68.00 -
21/30440313 DC:2021
BS EN ISO 15493 AMD11. Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and the system. Metric series
7/1/2021 - PDF - English -
Learn More€24.00 -
ASTM F2164-21
Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
7/1/2021 - PDF - English -
Learn More€51.00 -
ASTM D2774-21a
Standard Practice for Underground Installation of Thermoplastic Pressure Piping
7/1/2021 - PDF - English -
Learn More€51.00 -
DIN EN ISO 15493/A11:2021-07
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003/Amd 1:2016 + Cor 1:2004), German and English version EN ISO 15493:2003/prA11:2021
7/1/2021 - PDF - English, German -
Learn More€39.35 -
NF EN 1555-1, T54-065-1 (07/2021)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1 : General
7/1/2021 - Paper - French -
Learn More€86.67 -
ASTM F1804-21 + Redline
Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
7/1/2021 - PDF - English -
Learn More€53.00 -
NF EN 1555-3, T54-065-3 (07/2021)
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3 : Fittings
7/1/2021 - Paper - French -
Learn More€99.33 -
NF EN ISO 10619-2, T47-203-2 (07/2021)
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2 : Bending tests at sub-ambient temperatures
7/1/2021 - Paper - French -
Learn More€60.67
