23.040 : Pipeline components and pipelines
-
BS EN 15001-1:2023 + Redline
Tracked Changes. Gas Infrastructure. installation pipework with an operating pressure greater than 0,5 bar for industrial installations and 5 non-industrial Detailed functional requirements design, materials, construction, inspection testing
3/15/2023 - PDF - English -
Learn More€586.00 -
BS EN 1566-1:2022
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Specifications pipes, fittings system
3/13/2023 - PDF - English -
Learn More€331.00 -
BS EN 15001-2:2023 + Redline
Tracked Changes. Gas supply systems. installation pipework with an operating pressure greater than 0,5 bar for industrial installations and 5 non-industrial Detailed functional requirements commissioning, operation maintenance
3/10/2023 - PDF - English -
Learn More€326.00 -
BS EN 1455-1:2022
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Specifications pipes, fittings system
3/9/2023 - PDF - English -
Learn More€293.00 -
23/30467340 DC:2023
BS EN 12735-2. Copper and copper alloys. Seamless, round tubes for air conditioning refrigeration Part 2. Tubes equipment
3/9/2023 - PDF - English -
Learn More€24.00 -
BS EN 15001-1:2023
Gas Infrastructure. installation pipework with an operating pressure greater than 0,5 bar for industrial installations and 5 non-industrial Detailed functional requirements design, materials, construction, inspection testing
3/7/2023 - PDF - English -
Learn More€449.00 -
NBN EN 15001-1:2023
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
3/2/2023 - PDF - English -
Learn More€205.00 -
NBN EN 15001-2:2023
Gasversorgungssysteme - Gasleitungsanlagen mit einem Betriebsdruck größer 0,5 bar für industrielle Installationen und größer 5 bar für industrielle und nicht-industrielle Installationen - Teil 2: Detaillierte funktionale Anforderungen an Inbetriebnahme, Betrieb und Instandhaltung
3/2/2023 - PDF - German -
Learn More€121.00 -
NBN EN 15001-1:2023
Gasinfrastruktur - Gasleitungsanlagen mit einem Betriebsdruck größer 0,5 bar für industrielle Installationen und größer 5 bar für industrielle und nicht-industrielle Installationen - Teil 1: Detaillierte funktionale Anforderungen an Planung, Material, Bau, Inspektion und Prüfung
3/2/2023 - PDF - German -
Learn More€205.00 -
NBN EN 15001-2:2023
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
3/2/2023 - PDF - English -
Learn More€121.00 -
NBN EN 15001-1:2023
Infrastructures gazières - Canalisations d’installations de gaz avec une pression de service supérieure à 0,5 bar pour les installations industrielles et supérieure à 5 bar pour les installations industrielles et non industrielles (domestiques et commerciales) - Partie 1 : Exigences fonctionnelles détaillées relatives à la conception, aux matériaux, à la construction, à l'inspection et aux essais
3/2/2023 - PDF - French -
Learn More€205.00 -
NBN EN 15001-2:2023
Infrastructures gazières - Canalisations d'installation de gaz avec une pression de service supérieure à 0,5 bar pour les installations industrielles et supérieure à 5 bar pour les installations industrielles et non industrielles - Partie 2 : Exigences fonctionnelles détaillées pour la mise en service, l'exploitation et la maintenance
3/2/2023 - PDF - French -
Learn More€121.00 -
DIN EN 12889:2023-03
Trenchless construction and testing of drains and sewers, German version EN 12889:2022
3/1/2023 - PDF - German -
Learn More€126.26 -
DIN EN ISO 11296-9:2023-03
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022), German version EN ISO 11296-9:2022
3/1/2023 - PDF - German -
Learn More€110.00 -
PR NF EN 1514-1, E29-902-1PR (03/2023)
Brides et leurs assemblages - Dimensions des joints pour les brides désignées PN - Partie 1: Joints plats non-métalliques avec ou sans insert
3/1/2023 - Paper - English, French -
Learn More€88.50 -
ASTM F2159-23a
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
3/1/2023 - PDF - English -
Learn More€54.00 -
DIN EN 1514-1:2023-03
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts, German and English version prEN 1514-1:2023
3/1/2023 - PDF - English, German -
Learn More€85.79 -
PR NF EN 10217-1/A1, A49-201-1/A1PR (03/2023)
Tubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 1 : tubes en acier non allié, soudés électriquement et soudés à l'arc immergé, avec caractéristiques spécifiées à température ambiante
3/1/2023 - Paper - English, French -
Learn More€45.00 -
UNE-EN 751-3:2023
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings
3/1/2023 - PDF - Spanish -
Learn More€70.00 -
NF D36-136 (03/2023)
Installations de gaz - Caractéristiques dimensionnelles des raccordements mécaniques destinés à être installés sur les tuyauteries pour installations de gaz
3/1/2023 - Paper - French -
Learn More€99.33 -
DIN EN ISO 2398:2023-03
Rubber hoses, textile-reinforced, for compressed air - Specification (ISO/DIS 2398:2023), German and English version prEN ISO 2398:2023
3/1/2023 - PDF - English, German -
Learn More€72.80 -
ASTM F2159-23a + Redline
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
3/1/2023 - PDF - English -
Learn More€65.00 -
DIN EN 12560-1:2023-03
Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts, German and English version prEN 12560-1:2023
3/1/2023 - PDF - English, German -
Learn More€79.72 -
UNE-EN 751-3:2023
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings
3/1/2023 - PDF - English -
Learn More€84.00 -
PR NF EN 12560-1, E29-901-1PR (03/2023)
Brides et leurs assemblages - Dimensions des joints pour les brides désignées Class - Partie 1 : Joints plats non-métalliques avec ou sans insert
3/1/2023 - Paper - English, French -
Learn More€80.50 -
BS ISO 4427-2:2019+A1:2023
Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Pipes
2/28/2023 - PDF - English -
Learn More€250.00 -
23/30433901 DC:2023
BS ISO 11619. Pneumatic fluid power. Polyurethane and polyamide tubings for use primarily in pneumatic installations. Dimensions and specification
2/28/2023 - PDF - English -
Learn More€24.00 -
BS EN 15001-2:2023
Gas supply systems. installation pipework with an operating pressure greater than 0,5 bar for industrial installations and 5 non-industrial Detailed functional requirements commissioning, operation maintenance
2/28/2023 - PDF - English -
Learn More€250.00 -
PD CEN/TS 17176-3:2022 + Redline
Tracked Changes. Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fittings
2/27/2023 - PDF - English -
Learn More€326.00 -
23/30446498 DC:2023
BS EN ISO 2398. Rubber hoses, textile-reinforced, for compressed air. Specification
2/21/2023 - PDF - English -
Learn More€24.00 -
23/30470178 DC:2023
BS ISO 9854-2.2. Thermoplastics pipes for the transport of fluids. Determination Charpy impact properties Part 2. Test conditions various materials
2/21/2023 - PDF - English -
Learn More€24.00 -
23/30430401 DC:2023
BS ISO 4179. Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
2/21/2023 - PDF - English -
Learn More€24.00 -
UNE-EN 1852-1:2018+A1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
2/15/2023 - PDF - English -
Learn More€99.60 -
UNE-EN ISO 13479:2023
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
2/15/2023 - PDF - Spanish -
Learn More€70.00 -
ASTM F1483-23
Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
2/15/2023 - PDF - English -
Learn More€54.00 -
ASTM F1970-23
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
2/15/2023 - PDF - English -
Learn More€54.00 -
UNE-EN ISO 13479:2023
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
2/15/2023 - PDF - English -
Learn More€84.00 -
ASTM F1483-23 + Redline
Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
2/15/2023 - PDF - English -
Learn More€65.00 -
UNE-EN 1852-1:2018+A1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
2/15/2023 - PDF - Spanish -
Learn More€83.00 -
ASTM F1970-23 + Redline
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
2/15/2023 - PDF - English -
Learn More€65.00 -
23/30437565 DC:2023
BS ISO 13265. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
2/8/2023 - PDF - English -
Learn More€24.00 -
UNE 60713:2023
Stainless steel flexible hoses with connections for conduction of gaseous fuels up to a pressure of 0,4 bar with a maximal length of 2 m.
2/8/2023 - PDF - Spanish -
Learn More€58.00 -
BS EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
2/2/2023 - PDF - English -
Learn More€180.00 -
ASTM F441/F441M-23
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
2/1/2023 - PDF - English -
Learn More€54.00 -
DIN 86038-3:2023-02
Ships and marine technology - Loose flanges and lapped pipe ends extra light duty - Part 3: Lapped pipe ends for but welding DN 32 to DN 125
2/1/2023 - PDF - German -
Learn More€39.35 -
ASTM F2806-23 + Redline
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
2/1/2023 - PDF - English -
Learn More€65.00 -
ASTM F3347-23 + Redline
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
2/1/2023 - PDF - English -
Learn More€65.00 -
DIN EN 10217-1/A1:2023-02
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties, German and English version EN 10217-1:2019/prA1:2023
2/1/2023 - PDF - English, German -
Learn More€39.35 -
ASTM F2145-23
Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
2/1/2023 - PDF - English -
Learn More€54.00 -
DIN 86037-3:2023-02
Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 3: Loose flanges
2/1/2023 - PDF - German -
Learn More€39.35 -
ASTM F442/F442M-23 + Redline
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
2/1/2023 - PDF - English -
Learn More€65.00 -
ASTM F2389-23 + Redline
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
2/1/2023 - PDF - English -
Learn More€65.00 -
NF EN 15001-2, M50-001-2 (02/2023)
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2 : Detailed functional requirements for commissioning - Infrastructures gazières - Canalisations d'installation de gaz avec une pression de service supérieure à 0,5 bar pour les installations industrielles et supérieure à 5 bar pour les installations industrielles et non industrielles - Partie 2 : Exigences fonctionnelles détaillées pour la mise en
2/1/2023 - Paper - French -
Learn More€86.67 -
ASTM F1807-23
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
2/1/2023 - PDF - English -
Learn More€54.00 -
NBN ISO 23991:2023
Irrigation applications of ductile iron pipelines — Product design and installation ISO 23991:2022
2/1/2023 - PDF - English -
Learn More€142.00 -
NBN ISO 23991:2023
Canalisations en fonte ductile pour l'irrigation — Conception des produits et installation ISO 23991:2022
2/1/2023 - PDF - French -
Learn More€142.00 -
ASTM F441/F441M-23 + Redline
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
2/1/2023 - PDF - English -
Learn More€65.00 -
ASTM C828-23
Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
2/1/2023 - PDF - English -
Learn More€48.00 -
DIN 3376-1:2023-02
Gas meter connections - Part 1: Two pipes connection, DVGW code of practice
2/1/2023 - PDF - German -
Learn More€72.80 -
ASTM F2080-23
Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
2/1/2023 - PDF - English -
Learn More€54.00 -
NF EN 15001-1, M50-001-1 (02/2023)
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1 : Detailed functional requirements for design, materials, construction, inspection and testing - Infrastructures gazières - Canalisations d'installations de gaz avec une pression de service supérieure à 0,5 bar pour les installations industrielles et supérieure à 5 bar pour les installations industrielles et non industrielles (domestiques et commerciales) - Partie 1 : Exigences
2/1/2023 - Paper - French -
Learn More€192.00 -
ASTM F2145-23 + Redline
Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
2/1/2023 - PDF - English -
Learn More€65.00 -
DIN 86038-1:2023-02
Ships and marine technology - Loose flanges and lapped pipe ends extra light duty - Part 1: Lapped pipe ends DN 32 to DN 125
2/1/2023 - PDF - German -
Learn More€39.35 -
ASTM F2806-23
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
2/1/2023 - PDF - English -
Learn More€54.00 -
ASTM F3347-23
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
2/1/2023 - PDF - English -
Learn More€54.00 -
ASTM F1807-23 + Redline
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
2/1/2023 - PDF - English -
Learn More€65.00 -
DIN 86037-2:2023-02
Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 2: Welding necks
2/1/2023 - PDF - German -
Learn More€45.98 -
ASTM F442/F442M-23
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
2/1/2023 - PDF - English -
Learn More€54.00 -
ASTM F2389-23
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
2/1/2023 - PDF - English -
Learn More€54.00 -
ASTM C828-23 + Redline
Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
2/1/2023 - PDF - English -
Learn More€57.00 -
DIN 3376-2:2023-02
Gasmeter connections - Part 2: One pipe connection, DVGW code of practice
2/1/2023 - PDF - German -
Learn More€92.62 -
ASTM F2080-23 + Redline
Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
2/1/2023 - PDF - English -
Learn More€65.00 -
NBN ISO 4370:2023
Environmental life cycle assessment and recycling of ductile iron pipes for water applications ISO 4370:2022
2/1/2023 - PDF - English -
Learn More€89.00 -
23/30452437 DC:2023
BS EN 1514-1. Flanges and their joints. Dimensions of gaskets for PN-designated flanges Non-metallic flat with or without inserts
1/27/2023 - PDF - English -
Learn More€24.00 -
23/30452433 DC:2023
BS EN 12560-1. Flanges and their joints. Dimensions of gaskets for Class-designated flanges Part 1. Non-metallic flat with or without inserts
1/27/2023 - PDF - English -
Learn More€24.00 -
BS EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
1/25/2023 - PDF - English -
Learn More€180.00 -
BS EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
1/25/2023 - PDF - English -
Learn More€180.00 -
23/30427627 DC:2023
BS ISO 16422-2 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 2:
1/19/2023 - PDF - English -
Learn More€24.00 -
23/30465607 DC:2023
BS EN 10217-1 AMD1. Welded steel tubes for pressure purposes. Technical delivery conditions Part 1. Electric welded and submerged arc non-alloy with specified room temperature properties
1/19/2023 - PDF - English -
Learn More€24.00 -
23/30427632 DC:2023
BS ISO 16422-5. Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 5. Fitness purpose system
1/19/2023 - PDF - English -
Learn More€24.00 -
23/30427624 DC:2023
BS ISO 16422-1. Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 1. General
1/19/2023 - PDF - English -
Learn More€24.00 -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
1/18/2023 - PDF - English -
Learn More€40.80 -
UNE-EN 17649:2023
Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
1/18/2023 - PDF - Spanish -
Learn More€87.00 -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
1/18/2023 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 17649:2023
Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
1/18/2023 - PDF - English -
Learn More€104.40 -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
1/18/2023 - PDF - Spanish -
Learn More€34.00 -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
1/18/2023 - PDF - English -
Learn More€55.20 -
NBN EN ISO 13266:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Widerstandsfähigkeit gegen Belastungen der Oberfläche und Verkehrslasten (ISO 13266:2022)
1/15/2023 - PDF - German -
Learn More€37.00 -
NBN EN ISO 13266:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)
1/15/2023 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
1/15/2023 - PDF - English -
Learn More€37.00 -
NBN EN ISO 13267:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Böden von Kontroll- und Einsteigschächten aus Thermoplasten - Prüfverfahren für die Widerstandsfähigkeit gegen Einbeulen (ISO 13267:2022)
1/15/2023 - PDF - German -
Learn More€58.00 -
NBN EN ISO 13267:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage (ISO 13267:2022)
1/15/2023 - PDF - French -
Learn More€58.00 -
NBN EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
1/15/2023 - PDF - English -
Learn More€58.00 -
NBN EN ISO 13268:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Ringsteifigkeit (ISO 13268:2022)
1/14/2023 - PDF - German -
Learn More€58.00 -
NBN EN ISO 13268:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire (ISO 13268:2022)
1/14/2023 - PDF - French -
Learn More€58.00 -
NBN EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
1/14/2023 - PDF - English -
Learn More€58.00 -
€449.00
-
NF EN ISO 13267, P16-368 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage
1/1/2023 - Paper - French -
Learn More€60.67 -
ASTM Volume 01.01 - Multi-User - Single-Site Online
Steel–Piping, Tubing, Fittings
The subscription ends 12 months from the day your order is processed.
1/1/2023 - Internet - English -
Learn More€958.55 -
NF EN ISO 13268, P16-369 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire
1/1/2023 - Paper - French -
Learn More€60.67 -
NF EN ISO 13266, P16-367 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation
1/1/2023 - Paper - French -
Learn More€48.00 -
PR NF EN 1092-1/A1, E29-200-1/A1PR (01/2023)
Brides et leurs assemblages - Brides circulaires pour tubes, appareils de robinetterie, raccords et accessoires, désignées PN - Partie 1 : Brides en acier
1/1/2023 - Paper - English, French -
Learn More€107.50 -
€318.00
-
VdS 2100-45:2023-01
VdS Guidelines for Water Extinguishing Systems - Polymer Coated Pipelines - Requirements and Test Methods
1/1/2023 - - -
Learn More€26.88 -
UNE-EN ISO 8330:2022
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2022)
12/28/2022 - PDF - Spanish -
Learn More€84.00 -
UNE-EN ISO 8330:2022
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2022)
12/28/2022 - PDF - English -
Learn More€100.80 -
NBN EN 13480-3:2017/A5:2022
Tuyauteries industrielles métalliques - Partie 3: Conception et calcul
12/22/2022 - PDF - French -
Learn More€20.00 -
NBN EN 13480-3:2017/A5:2022
Metallische industrielle Rohrleitungen - Teil 3: Konstruktion und Berechnung
12/22/2022 - PDF - German -
Learn More€20.00 -
€20.00
-
BS EN 12889:2022 + Redline
Tracked Changes. Trenchless construction and testing of drains and sewers
12/21/2022 - PDF - English -
Learn More€454.00 -
UNE-EN 476:2022
General requirements for components used in drains and sewers
12/21/2022 - PDF - Spanish -
Learn More€73.00 -
UNE-EN ISO 18752:2022
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2022)
12/21/2022 - PDF - Spanish -
Learn More€69.00 -
UNE-EN 476:2022
General requirements for components used in drains and sewers
12/21/2022 - PDF - English -
Learn More€87.60 -
UNE-EN ISO 18752:2022
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2022)
12/21/2022 - PDF - English -
Learn More€82.80 -
NBN EN 1566-1:2022
Kunststoff- Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Chloriertes Polyvinylchlorid (PVC-C) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
12/15/2022 - PDF - German -
Learn More€163.00 -
NBN EN 1455-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
12/15/2022 - PDF - English -
Learn More€163.00 -
NBN EN 1566-1:2022
Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
12/15/2022 - PDF - French -
Learn More€163.00 -
NBN EN 1455-1:2022
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Acrylnitril-Butadien-Styrol (ABS) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
12/15/2022 - PDF - German -
Learn More€163.00 -
NBN EN 1455-1:2022
Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
12/15/2022 - PDF - French -
Learn More€163.00 -
NBN EN 1566-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
12/15/2022 - PDF - English -
Learn More€163.00 -
UNE-EN 17613:2022
LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
12/7/2022 - PDF - English -
Learn More€81.60 -
UNE-EN 17613:2022
LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
12/7/2022 - PDF - Spanish -
Learn More€68.00 -
DIN EN 1515-4:2022-12
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU, German version EN 1515-4:2021 + AC:2022
12/1/2022 - PDF - German -
Learn More€85.79 -
NF EN 17800, A48-800 (12/2022)
Coût du cycle de vie (CCV) et analyse du cycle de vie (ACV) pour les émissions de CO2 dans les systèmes de canalisations en fonte ductile
12/1/2022 - Paper - French -
Learn More€86.67 -
DIN 86090:2022-12
Fittings for butt welding into copper-nickel-alloy pipelines - Elbows
12/1/2022 - PDF - German -
Learn More€59.63 -
DIN EN 14525:2022-12
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement, German version EN 14525:2022.
12/1/2022 - PDF - German -
Learn More€104.95 -
ASTM D2992-22
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
12/1/2022 - PDF - English -
Learn More€54.00 -
DIN EN 17176-2:2022-12
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes, German version EN 17176-2:2019+A1:2022.
12/1/2022 - PDF - German -
Learn More€99.35 -
DIN EN 13483:2022-12
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification, German version EN 13483:2022
12/1/2022 - PDF - German -
Learn More€110.00 -
CEN/TS 17152-3:2022
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme
12/1/2022 - PDF - English -
Learn More€89.00 -
DIN EN 1092-1/A1:2022-12
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges, German and English version EN 1092-1:2018/A1:2022
12/1/2022 - PDF - English, German -
Learn More€99.35 -
DIN 86089:2022-12
Fittings for butt welding into copper-nickel-alloy pipelines - Concentric reducers
12/1/2022 - PDF - German -
Learn More€72.80 -
NF EN 1566-1, T54-919-1 (12/2022)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : Requirements for pipes, fittings and the system
12/1/2022 - Paper - French -
Learn More€108.33 -
ASTM D2992-22 + Redline
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
12/1/2022 - PDF - English -
Learn More€65.00 -
DIN 86087:2022-12
Fittings for butt welding into copper-nickel-alloy pipelines - Saddle type connections
12/1/2022 - PDF - German -
Learn More€65.89 -
22/30462458 DC:2022
BS EN 1092-1:2018 AMD1. Flanges and their joints. Circular flanges for pipes, valves, fittings accessories, PN designated Part 1. Steel
12/1/2022 - PDF - English -
Learn More€24.00 -
DIN EN ISO 11295:2022-12
Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022), German version EN ISO 11295:2022
12/1/2022 - PDF - German -
Learn More€163.74 -
NF EN 1455-1, T54-914-1 (12/2022)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1 : Requirements for pipes, fittings and the system - Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que
12/1/2022 - Paper - French -
Learn More€108.33 -
VG 95955-5:2022-12
Hoses for fuelling and pipelines - Part 5: Marking procedures for hoses and hose assemblies, Text in German and English
12/1/2022 - PDF - English, German -
Learn More€65.89 -
NF EN 13480-3V1/A5, E86-700-3/A5 (12/2022)
Tuyauteries industrielles métalliques - Partie 3 : conception et calcul
12/1/2022 - Paper - French -
Learn More€78.50 -
DIN 86088:2022-12
Fittings for butt welding into copper-nickel-alloy pipelines - Tees
12/1/2022 - PDF - German -
Learn More€72.80 -
NF ISO 12151-2, E48-079-2 (12/2022)
Raccordements pour transmissions hydrauliques et applications générales - Flexibles de raccordement - Partie 2 : Flexibles avec embouts à cône à 24 degrés et joints toriques conformes à l'ISO 8434-1
12/1/2022 - Paper - French -
Learn More€75.67 -
UNE-EN 558:2022
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
11/30/2022 - PDF - English -
Learn More€114.00 -
UNE-EN ISO 3459:2022
Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)
11/30/2022 - PDF - English -
Learn More€69.60 -
UNE-EN ISO 4671:2022
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)
11/30/2022 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 558:2022
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
11/30/2022 - PDF - Spanish -
Learn More€95.00 -
UNE-EN ISO 4671:2022
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)
11/30/2022 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 3459:2022
Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)
11/30/2022 - PDF - Spanish -
Learn More€58.00 -
€348.00
-
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
11/16/2022 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 13844:2022
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
11/16/2022 - PDF - English -
Learn More€69.60 -
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
11/16/2022 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 13844:2022
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
11/16/2022 - PDF - Spanish -
Learn More€58.00 -
ASTM F2019-22 + Redline
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
11/15/2022 - PDF - English -
Learn More€72.00 -
ASTM F1743-22
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
11/15/2022 - PDF - English -
Learn More€54.00 -
ASTM F1867-22 + Redline
Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
11/15/2022 - PDF - English -
Learn More€65.00 -
ASTM F2599-22 + Redline
Standard Practice for Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place Liner
11/15/2022 - PDF - English -
Learn More€57.00 -
ASTM F1741-22 + Redline
Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
11/15/2022 - PDF - English -
Learn More€65.00 -
ASTM F1962-22
Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
11/15/2022 - PDF - English -
Learn More€60.00 -
BS EN ISO 13844:2022 + Redline
Tracked Changes. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
11/15/2022 - PDF - English -
Learn More€235.00 -
ASTM F1743-22 + Redline
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
11/15/2022 - PDF - English -
Learn More€65.00 -
ASTM F2019-22
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
11/15/2022 - PDF - English -
Learn More€60.00 -
ASTM F1867-22
Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
11/15/2022 - PDF - English -
Learn More€54.00 -
ASTM F1962-22 + Redline
Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
11/15/2022 - PDF - English -
Learn More€72.00 -
ASTM F2599-22
Standard Practice for Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place Liner
11/15/2022 - PDF - English -
Learn More€48.00 -
ASTM F1741-22
Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
11/15/2022 - PDF - English -
Learn More€54.00 -
BS EN 1852-1:2018+A1:2022
Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Specifications pipes, fittings the system
11/8/2022 - PDF - English -
Learn More€293.00 -
UNE 60719:2022
Fittings for hand operated metallic valves for installations using gaseous fuels.
11/2/2022 - PDF - Spanish -
Learn More€73.00 -
€80.00
-
€96.00
-
BS EN ISO 15874-2:2013+A2:2022
Plastics piping systems for hot and cold water installations. Polypropylene (PP) Pipes
11/2/2022 - PDF - English -
Learn More€250.00 -
BS ISO 12151-2:2022 + Redline
Tracked Changes. Connections for hydraulic fluid power and general use. Hose fittings with ISO 8434-1 24° cone connector ends O-rings
11/1/2022 - PDF - English -
Learn More€235.00 -
ASTM A376/A376M-22 + Redline
Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
11/1/2022 - PDF - English -
Learn More€65.00 -
ASTM A787/A787M-22
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
11/1/2022 - PDF - English -
Learn More€54.00 -
ASTM D2239-22 + Redline
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
11/1/2022 - PDF - English -
Learn More€65.00 -
ASTM A420/A420M-22 + Redline
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
11/1/2022 - PDF - English -
Learn More€65.00 -
ASTM A860/A860M-22
Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
11/1/2022 - PDF - English -
Learn More€54.00 -
ASTM F1412-22
Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
11/1/2022 - PDF - English -
Learn More€54.00 -
ASTM A403/A403M-22b + Redline
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
11/1/2022 - PDF - English -
Learn More€72.00 -
€54.00
-
VG 95920-2:2022-11
Hose assemblies - Hoses and hose fittings - Part 2: Standards for fluid power - Overview, Text in German and English
11/1/2022 - PDF - English, German -
Learn More€104.95 -
DIN 2425-4:2022-11
Plans for Public Utilities, Water Resources and Long-distance Lines - Part 4: Drain and sewer systems outside buildings
11/1/2022 - PDF - German -
Learn More€115.33 -
ASTM A1109-22
Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
11/1/2022 - PDF - English -
Learn More€54.00 -
ASTM A787/A787M-22 + Redline
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
11/1/2022 - PDF - English -
Learn More€65.00 -
ASTM D3035-22
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
11/1/2022 - PDF - English -
Learn More€54.00 -
DIN EN 1594:2022-11
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements, German and English version prEN 1594:2022
11/1/2022 - PDF - English, German -
Learn More€152.71 -
ASTM A376/A376M-22
Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
11/1/2022 - PDF - English -
Learn More€54.00 -
ASTM A860/A860M-22 + Redline
Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
11/1/2022 - PDF - English -
Learn More€65.00 -
ASTM F1412-22 + Redline
Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
11/1/2022 - PDF - English -
Learn More€65.00 -
ASTM D2239-22
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
11/1/2022 - PDF - English -
Learn More€54.00 -
ASTM A420/A420M-22
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
11/1/2022 - PDF - English -
Learn More€54.00 -
€65.00
-
ASTM A1109-22 + Redline
Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
11/1/2022 - PDF - English -
Learn More€65.00 -
DIN EN ISO 15874-2:2022-11
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013 + Amd.1:2018 + Amd.2:2022), German and English version EN ISO 15874-2:2013 + A1:2018 + A2:2022
11/1/2022 - PDF - English, German -
Learn More€131.96 -
ASTM A403/A403M-22b
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
11/1/2022 - PDF - English -
Learn More€60.00 -
ASTM D3035-22 + Redline
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
11/1/2022 - PDF - English -
Learn More€65.00 -
PR NF EN 1594, NF EN 1594 (E) Prépublié/Prepublished (11/2022)
Infrastructures gazières - Canalisation pour pression maximale de service supérieure à 16 bar - Prescriptions fonctionnelles
11/1/2022 - Paper - English, French -
Learn More€148.00 -
BS EN 14525:2022
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
10/31/2022 - PDF - English -
Learn More€293.00 -
PD CEN ISO/TS 23818-2:2022
Assessment of conformity plastics piping systems for the rehabilitation existing pipelines Resin-fibre composite (RFC) material
10/31/2022 - PDF - English -
Learn More€293.00 -
PD CEN ISO/TS 23818-3:2022
Assessment of conformity plastics piping systems for the rehabilitation existing pipelines Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material
10/31/2022 - PDF - English -
Learn More€293.00