Page 38 | 23.040 : Pipeline components and pipelines 23 : Fluid systems and components for general use ICS

ASTM D6396-99(2020) + Redline

Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees
1/1/1999 - PDF - English - ASTM
Learn More

€61.00

DIN 2880:1999-01

Application of cement mortar lining for cast iron pipes, steel pipes and fittings
1/1/1999 - PDF - German - DIN
Learn More

€72.80

DIN 2880:1999-01

Cement mortar linings for cast iron pipes, steel pipes and steel fittings
1/1/1999 - PDF - English - DIN
Learn More

€91.12

NF E39-001 (12/1998) (R2013)

District heating. Hot or cold water transport and distribution networks. Terminology. - Chauffage urbain
12/1/1998 - Paper - French - AFNOR
Learn More

€86.67

JIS K 7020:1998 (R2013)

Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
11/20/1998 - PDF - Japanese - JSA
Learn More

€36.27

DVGW G 480-1:1998-11

Use of elastomer seals for gas distribution and gas transmission pipelines - Joints in socket and spigot pipes made of ductile cast iron
11/1/1998 - PDF - German - DVGW
Learn More

€41.95

JIS K 7037:1998 (R2013)

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
10/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

JIS K 7038:1998 (R2013)

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
10/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate bending strain and calculation of the long-term ultimate relative ring deflection, both under wet conditions
10/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

JIS K 7040:1998 (R2013)

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Determination of the amounts of constituents using the gravimetric method
10/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

JIS K 7042:1998 (R2013)

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped rigid joints
10/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

NBN EN 12068:1998

Cathodic protection - External organic coatings for the corrosion protection of burried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
10/9/1998 - PDF - French - NBN
Learn More

€37.00

NBN EN 12068:1998

Cathodic protection - External organic coatings for the corrosion protection of burried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
10/9/1998 - PDF - German - NBN
Learn More

€37.00

NBN EN 12068:1998

Cathodic protection - External organic coatings for the corrosion protection of burried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
10/9/1998 - PDF - English - NBN
Learn More

€37.00

UNE-EN 10240:1998 (R2016)

Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
10/6/1998 - PDF - Spanish - AENOR
Learn More

€63.00

UNE-EN 10240:1998 (R2016)

Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
10/6/1998 - PDF - English - AENOR
Learn More

€75.60

NBN EN 681-1/A1:1998

Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
9/10/1998 - PDF - French - NBN
Learn More

€20.00

NBN EN 681-1/A1:1998

Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
9/10/1998 - PDF - German - NBN
Learn More

€20.00

NBN EN 681-1/A1:1998

Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
9/10/1998 - PDF - English - NBN
Learn More

€20.00

NBN EN 681-1/A1:1998

Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
9/10/1998 - PDF - Dutch - NBN
Learn More

€20.00

JIS K 6795:1998 (R2016)

Crosslinked polyethylene (PE-X) pipes - Effect of time and temperature on the expected strength
8/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

JIS K 6796:1998 (R2016)

Pipes and fitting made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
8/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

BS EN 12220:1998

Ventilation for buildings. Ductwork. Dimensions of circular flanges for general ventilation
8/15/1998 - PDF - English - BSI
Learn More

€151.00

DIN 20039:1998-08

Hose fittings - Hose clamps
8/1/1998 - PDF - German - DIN
Learn More

€32.34

NBN EN ISO 13760:1998

Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage (ISO 13760:1998)
8/1/1998 - PDF - French - NBN
Learn More

€37.00

NBN EN ISO 13760:1998

Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage (ISO 13760:1998)
8/1/1998 - PDF - German - NBN
Learn More

€37.00

NBN EN ISO 13760:1998

Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage (ISO 13760:1998)
8/1/1998 - PDF - English - NBN
Learn More

€37.00

UNE-EN ISO 13783:1998

PLASTIC PIPING SYSTEMS. UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U) END-LOAD-BEARING DOUBLES SOCKET JOINTS. TEST METHOD FOR LEAKTIGHTNESS AND STRENGTH WHILE SUBJECTED TO BENDING AND INTERNAL PRESSURE. (ISO 13783:1997).
7/27/1998 - PDF - Spanish - AENOR
Learn More

€49.00

UNE-EN ISO 13783:1998

PLASTIC PIPING SYSTEMS. UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U) END-LOAD-BEARING DOUBLES SOCKET JOINTS. TEST METHOD FOR LEAKTIGHTNESS AND STRENGTH WHILE SUBJECTED TO BENDING AND INTERNAL PRESSURE. (ISO 13783:1997).
7/27/1998 - PDF - English - AENOR
Learn More

€58.80

ISO 13966:1998 (R2019)

Thermoplastics pipes and fittings
Nominal ring stiffnesses
7/9/1998 - Paper - English - ISO
Learn More

€48.00

ISO 13966:1998 (R2019)

Thermoplastics pipes and fittings
Nominal ring stiffnesses
7/9/1998 - Paper - French - ISO
Learn More

€48.00

DIN EN ISO 13760:1998-07

Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage (ISO 13760:1998); German version EN ISO 13760:1998
7/1/1998 - PDF - German - DIN
Learn More

€39.35

DIN EN ISO 13760:1998-07

Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage (ISO 13760:1998); German version EN ISO 13760:1998
7/1/1998 - PDF - English - DIN
Learn More

€49.16

DIN EN ISO 13783:1998-07

Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997); German version EN ISO 13783:1997
7/1/1998 - PDF - German - DIN
Learn More

€39.35

DIN EN ISO 13783:1998-07

Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997); German version EN ISO 13783:1997
7/1/1998 - PDF - English - DIN
Learn More

€49.16

NBN EN 12220:1998

Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation
6/23/1998 - PDF - French - NBN
Learn More

€89.00

NBN EN 12220:1998

Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation
6/23/1998 - PDF - German - NBN
Learn More

€89.00

NBN EN 12220:1998

Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation
6/23/1998 - PDF - English - NBN
Learn More

€89.00

DIN EN 12220:1998-06

Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation; German version EN 12220:1998
6/1/1998 - PDF - German - DIN
Learn More

€45.98

DIN EN 12220:1998-06

Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation; German version EN 12220:1998
6/1/1998 - PDF - English - DIN
Learn More

€57.57

ISO 13760:1998 (R2019)

Plastics pipes for the conveyance of fluids under pressure
Miner's rule
5/14/1998 - Paper - French - ISO
Learn More

€48.00

ISO 13760:1998 (R2019)

Plastics pipes for the conveyance of fluids under pressure
Miner's rule
5/14/1998 - Paper - English - ISO
Learn More

€48.00

UNE-EN 12100:1998 (R2021)

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
5/7/1998 - PDF - Spanish - AENOR
Learn More

€39.00

UNE-EN 12100:1998 (R2021)

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
5/7/1998 - PDF - English - AENOR
Learn More

€46.80

UNE-EN 12106:1998 (R2015)

Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
5/7/1998 - PDF - Spanish - AENOR
Learn More

€34.00

UNE-EN 12106:1998 (R2015)

Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
5/7/1998 - PDF - English - AENOR
Learn More

€40.80

JIS K 7033:1998 (R2016)

Plastics piping systems - Pipes made of glass-reinforced thermosetting plastics (GRP) - Determination of initial longitudinal tensile properties
4/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

JIS B 2290:1998 (R2013)

Vacuum technology - Flange dimensions
4/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

JIS K 7036:1998 (R2016)

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test method to prove the design of bolted flange joints
4/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

BS EN 10240:1998

Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants
4/15/1998 - PDF - English - BSI
Learn More

€151.00

BS EN 1862:1998

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment
4/15/1998 - PDF - English - BSI
Learn More

€151.00

NF T47-503 (04/1998)

Rubber O-rings. Materials requirements for the most common O-ring types. - Joints toriques en caoutchouc
4/1/1998 - Paper - French - AFNOR
Learn More

€99.33

JIS K 6330-5:1998 (R2016)

Testing methods for rubber and plastics hoses - Part 5: Determination of electrical resistance
3/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

JIS K 6330-8:1998 (R2016)

Testing methods for rubber and plastics hoses - Part 8: Hydraulic-pressure impulse test without flexing
3/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

JIS K 6330-10:1998 (R2016)

Testing methods for rubber and plastics hoses - Part 10: Determination of transmission of liquids through hose walls
3/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

BS EN 12118:1998

Plastics piping systems. Determination of moisture content in thermoplastics by coulometry
3/15/1998 - PDF - English - BSI
Learn More

€151.00

BS ISO 4433-1:1997

Thermoplastic pipes. Resistance to liquid chemicals. Classification Immersion test method
3/15/1998 - PDF - English - BSI
Learn More

€180.00

BS ISO 4433-3:1997

Thermoplastic pipes. Resistance to liquid chemicals. Classification Unplasticized poly(vinyl chloride) (PVC-U), high-impact (PVC-HI) and chlorinated (PVC-C) pipes
3/15/1998 - PDF - English - BSI
Learn More

€180.00

BS ISO 4433-2:1997

Thermoplastics pipes. Resistance to liquid chemicals. Classification Polyolefin pipes
3/15/1998 - PDF - English - BSI
Learn More

€180.00

BS ISO 4433-4:1997

Thermoplastics pipes. Resistance to liquid chemicals. Classification Poly(vinylidene fluoride) (PVDF) pipes
3/15/1998 - PDF - English - BSI
Learn More

€151.00

BS 7874:1998

Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines
3/15/1998 - PDF - English - BSI
Learn More

€151.00

UNE-EN 1393/AC:1998

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL LONGITUDINAL TENSILE PROPERTIES.
2/25/1998 - PDF - Spanish - AENOR
Learn More

€0.00

UNE-EN 1393/AC:1998

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL LONGITUDINAL TENSILE PROPERTIES.
2/25/1998 - PDF - English - AENOR
Learn More

€0.00

UNE-EN 1394/AC:1998

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE APPARENT INITIAL CIRCUMFERENTIAL TENSILE STRENGTH.
2/25/1998 - PDF - Spanish - AENOR
Learn More

€0.00

UNE-EN 1394/AC:1998

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE APPARENT INITIAL CIRCUMFERENTIAL TENSILE STRENGTH.
2/25/1998 - PDF - English - AENOR
Learn More

€0.00

BS EN 12100:1998

Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports
2/15/1998 - PDF - English - BSI
Learn More

€151.00

NBN EN 10240:1998

Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
2/15/1998 - PDF - French - NBN
Learn More

€37.00

NBN EN 10240:1998

Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
2/15/1998 - PDF - German - NBN
Learn More

€37.00

NBN EN 10240:1998

Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
2/15/1998 - PDF - English - NBN
Learn More

€37.00

BS EN 12106:1998

Plastics piping systems. Polyethylene (PE) pipes. Test method for the resistance to internal pressure after application of squeeze-off
2/15/1998 - PDF - English - BSI
Learn More

€151.00

BS EN ISO 13783:1998

Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure
2/15/1998 - PDF - English - BSI
Learn More

€151.00

DIN EN 10240:1998-02

Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants; German version EN 10240:1997
2/1/1998 - PDF - German - DIN
Learn More

€72.80

DIN EN 10240:1998-02

Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants; German version EN 10240:1997
2/1/1998 - PDF - English - DIN
Learn More

€91.12

DIN 3949:1998-02

Non soldering compression couplings - Flared connection parts for type of compression end according to DIN EN ISO 8434-1
2/1/1998 - PDF - German - DIN
Learn More

€39.35

DIN 7601:1998-02

Compression couplings with ball-type nipples - Complete unions and survey
2/1/1998 - PDF - German - DIN
Learn More

€39.35

UNE-EN 1092-2:1998

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
1/30/1998 - PDF - Spanish - AENOR
Learn More

€82.00

UNE-EN 1092-2:1998

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
1/30/1998 - PDF - English - AENOR
Learn More

€98.40

JIS B 0011-1:1998 (R2013)

Technical drawings - Simplified representation of pipelines - Part 1: General rules and orthogonal representation
1/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

JIS B 0011-2:1998 (R2013)

Technical drawings - Simplified representation of pipelines - Part 2: Isometric representation
1/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

JIS B 0011-3:1998 (R2013)

Technical drawings - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems
1/20/1998 - PDF - Japanese - JSA
Learn More

€25.00

ASTM A862/A862M-98(2020)

Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
1/1/1998 - PDF - English - ASTM
Learn More

€46.00

ASTM A862/A862M-98(2020) + Redline

Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
1/1/1998 - PDF - English - ASTM
Learn More

€53.00

DIN 30658-1:1998-01

Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing
1/1/1998 - PDF - German - DIN
Learn More

€52.90

ISO 13957:1997 (R2019)

Plastics pipes and fittings
Polyethylene (PE) tapping tees
12/25/1997 - Paper - English - ISO
Learn More

€48.00

ISO 13957:1997 (R2019)

Plastics pipes and fittings
Polyethylene (PE) tapping tees
12/25/1997 - Paper - French - ISO
Learn More

€48.00

ISO 13954:1997

Plastics pipes and fittings
Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
12/25/1997 - Paper - English - ISO
Learn More

€48.00

ISO 13954:1997

Plastics pipes and fittings
Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
12/25/1997 - Paper - French - ISO
Learn More

€48.00

ISO 13955:1997 (R2019)

Plastics pipes and fittings
Crushing decohesion test for polyethylene (PE) electrofusion assemblies
12/25/1997 - Paper - English - ISO
Learn More

€48.00

ISO 13955:1997 (R2019)

Plastics pipes and fittings
Crushing decohesion test for polyethylene (PE) electrofusion assemblies
12/25/1997 - Paper - French - ISO
Learn More

€48.00

ISO 4433-1:1997 (R2019)

Thermoplastics pipes
Resistance to liquid chemicals
12/18/1997 - Paper - English - ISO
Learn More

€110.00

ISO 4433-1:1997 (R2019)

Thermoplastics pipes
Resistance to liquid chemicals
12/18/1997 - Paper - French - ISO
Learn More

€110.00

ISO 4433-2:1997 (R2019)

Thermoplastics pipes
Resistance to liquid chemicals
12/18/1997 - Paper - English - ISO
Learn More

€110.00

ISO 4433-2:1997 (R2019)

Thermoplastics pipes
Resistance to liquid chemicals
12/18/1997 - Paper - French - ISO
Learn More

€110.00

ISO 4433-3:1997 (R2019)

Thermoplastics pipes
Resistance to liquid chemicals
12/18/1997 - Paper - English - ISO
Learn More

€72.00

ISO 4433-3:1997 (R2019)

Thermoplastics pipes
Resistance to liquid chemicals
12/18/1997 - Paper - French - ISO
Learn More

€72.00

ISO 4433-4:1997 (R2019)

Thermoplastics pipes
Resistance to liquid chemicals
12/18/1997 - Paper - English - ISO
Learn More

€72.00

ISO 4433-4:1997 (R2019)

Thermoplastics pipes
Resistance to liquid chemicals
12/18/1997 - Paper - French - ISO
Learn More

€72.00

BS EN 1638:1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure
12/15/1997 - PDF - English - BSI
Learn More

€151.00

BS EN 12099:1997

Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content
12/15/1997 - PDF - English - BSI
Learn More

€151.00

UNE-EN 12099:1997 (R2019)

PLASTICS PIPING SYSTEMS. POLYETHYLENE PIPING MATERIALS AND COMPONENTS. DETERMINATION OF VOLATILE CONTENT.
11/26/1997 - PDF - Spanish - AENOR
Learn More

€27.00

UNE-EN 12099:1997 (R2019)

PLASTICS PIPING SYSTEMS. POLYETHYLENE PIPING MATERIALS AND COMPONENTS. DETERMINATION OF VOLATILE CONTENT.
11/26/1997 - PDF - English - AENOR
Learn More

€32.40

JIS K 7013:1997 (R2006)

Fibre reinforced plastic pipes
11/20/1997 - PDF - Japanese - JSA
Learn More

€50.18

JIS K 7014:1997 (R2016)

Fittings and joints for fibre reinforced plastic pipes
11/20/1997 - PDF - Japanese - JSA
Learn More

€41.86

UNE-EN 1514-4:1997 (R2018)

FLANGES AND THEIR JOINTS. DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES. PART 4: CORRUGATED, FLAT OR GROOVED METALLIC AND FILLED METALLIC GASKETS FOR USE WITH STEEL FLANGES.
11/20/1997 - PDF - Spanish - AENOR
Learn More

€60.00

UNE-EN 1514-4:1997 (R2018)

FLANGES AND THEIR JOINTS. DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES. PART 4: CORRUGATED, FLAT OR GROOVED METALLIC AND FILLED METALLIC GASKETS FOR USE WITH STEEL FLANGES.
11/20/1997 - PDF - English - AENOR
Learn More

€72.00

UNE-EN 1716:1997 (R2021)

Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee
11/14/1997 - PDF - Spanish - AENOR
Learn More

€34.00

UNE-EN 1716:1997 (R2021)

Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee
11/14/1997 - PDF - English - AENOR
Learn More

€40.80

UNE-EN 1514-1:1997

FLANGES AND THEIR JOINTS. DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES. PART 1: NON-METALLIC FLAT GASKETS WITH OR WITHOUT INSERTS.
11/14/1997 - PDF - Spanish - AENOR
Learn More

€69.00

UNE-EN 1514-1:1997

FLANGES AND THEIR JOINTS. DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES. PART 1: NON-METALLIC FLAT GASKETS WITH OR WITHOUT INSERTS.
11/14/1997 - PDF - English - AENOR
Learn More

€82.80

UNE-EN 1514-3:1997 (R2018)

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
11/12/1997 - PDF - Spanish - AENOR
Learn More

€57.00

UNE-EN 1514-3:1997 (R2018)

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
11/12/1997 - PDF - English - AENOR
Learn More

€68.40

NBN EN ISO 13783:1997

Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997)
11/11/1997 - PDF - French - NBN
Learn More

€37.00

NBN EN ISO 13783:1997

Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997)
11/11/1997 - PDF - German - NBN
Learn More

€37.00

NBN EN ISO 13783:1997

Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997)
11/11/1997 - PDF - English - NBN
Learn More

€37.00

DIN EN 12100:1997-11

Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
11/1/1997 - PDF - German - DIN
Learn More

€32.34

DIN EN 12100:1997-11

Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
11/1/1997 - PDF - English - DIN
Learn More

€40.56

DVGW G 465-1:1997-11

Inspection of gas pipeline systems with an operating pressure up to 4 bar
11/1/1997 - - - DVGW
Learn More

€67.95

DIN EN 12106:1997-11

Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off; German version EN 12106:1997
11/1/1997 - PDF - German - DIN
Learn More

€32.34

DIN EN 12106:1997-11

Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off; German version EN 12106:1997
11/1/1997 - PDF - English - DIN
Learn More

€40.56

DIN EN 12118:1997-11

Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
11/1/1997 - PDF - German - DIN
Learn More

€32.34

DIN EN 12118:1997-11

Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
11/1/1997 - PDF - English - DIN
Learn More

€40.56

NF EN 12100, T54-930 (11/1997)

Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports. - Systèmes de canalisations en plastiques
11/1/1997 - Paper - French - AFNOR
Learn More

€60.67

DIN 1565:1997-11

Steel fittings for railway vehicles - Pipe nipples, double pipe nipples, swadged nipples
11/1/1997 - PDF - German - DIN
Learn More

€39.35

NF EN 751-1, D36-106-1 (11/1997) (R2002)

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Part 1 : anaerobic jointing compounds.
11/1/1997 - Paper - French - AFNOR
Learn More

€75.50

NF EN 751-2, D36-106-2 (11/1997) (R2002)

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Part 2 : non-hardening jointing compounds.
11/1/1997 - Paper - French - AFNOR
Learn More

€75.50

JIS K 7030:1997 (R2016)

Pipes and fittings made of glass fiber reinforced thermosetting plastics (GRP) - Definitions of terms relating pressure, including relationships between them, and terms for installation and jointing
10/20/1997 - PDF - Japanese - JSA
Learn More

€25.00

NBN EN 12100:1997

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
10/10/1997 - PDF - French - NBN
Learn More

€89.00

NBN EN 12100:1997

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
10/10/1997 - PDF - German - NBN
Learn More

€89.00

NBN EN 12100:1997

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
10/10/1997 - PDF - English - NBN
Learn More

€89.00

NBN EN 12106:1997

Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
10/10/1997 - PDF - French - NBN
Learn More

€37.00

NBN EN 12106:1997

Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
10/10/1997 - PDF - German - NBN
Learn More

€37.00

NBN EN 12106:1997

Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
10/10/1997 - PDF - English - NBN
Learn More

€37.00

UNE-EN 751-1:1997

SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 1: ANAEROBIC JOINTING COMPOUNDS.
9/30/1997 - PDF - Spanish - AENOR
Learn More

€57.00

UNE-EN 751-1:1997

SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 1: ANAEROBIC JOINTING COMPOUNDS.
9/30/1997 - PDF - English - AENOR
Learn More

€68.40

UNE-EN 751-2:1997

SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 2: NON-HARDENING JOINTING COMPOUNDS.
9/30/1997 - PDF - Spanish - AENOR
Learn More

€58.00

UNE-EN 751-2:1997

SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 2: NON-HARDENING JOINTING COMPOUNDS.
9/30/1997 - PDF - English - AENOR
Learn More

€69.60

JIS K 6353:1997 (R2001)

Rubber goods for water works
9/20/1997 - PDF - Japanese - JSA
Learn More

€25.00

ISO 13480:1997 (R2021)

Polyethylene pipes
Resistance to slow crack growth
9/11/1997 - Paper - English - ISO
Learn More

€72.00

ISO 13480:1997 (R2021)

Polyethylene pipes
Resistance to slow crack growth
9/11/1997 - Paper - French - ISO
Learn More

€72.00

SEP 1913:1997-09

Ultraschall-Oberflächenprüfung von nahtlosen und längsnahtgeschweißten Stahlrohren mit Oberflächenwellen
9/1/1997 - PDF - German - STAHL
Learn More

€19.50

ISO 13783:1997 (R2023)

Plastics piping systems
Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints
8/28/1997 - Paper - French - ISO
Learn More

€48.00

ISO 13783:1997 (R2023)

Plastics piping systems
Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints
8/28/1997 - Paper - English - ISO
Learn More

€48.00

BS EN 1514-1:1997

Flanges and their joints. Dimensions of gaskets for PN-designated flanges Non-metallic flat with or without inserts
8/15/1997 - PDF - English - BSI
Learn More

€180.00

BS EN 1514-4:1997

Flanges and their joints. Dimensions of gaskets for PN-designated flanges Corrugated, flat or grooved metallic filled use with steel
8/15/1997 - PDF - English - BSI
Learn More

€151.00

BS EN 1514-3:1997

Flanges and their joints. Dimensions of gaskets for PN-designated flanges Non-metallic PTFE envelope
8/15/1997 - PDF - English - BSI
Learn More

€151.00

UNE-EN 12095:1997 (R2019)

PLASTICS PIPING SYSTEMS. BRACKETS FOR RAINWATER PIPING SYSTEMS. TEST METHOD FOR BRACKET STRENGTH.
8/6/1997 - PDF - Spanish - AENOR
Learn More

€34.00

UNE-EN 12095:1997 (R2019)

PLASTICS PIPING SYSTEMS. BRACKETS FOR RAINWATER PIPING SYSTEMS. TEST METHOD FOR BRACKET STRENGTH.
8/6/1997 - PDF - English - AENOR
Learn More

€40.80

DIN EN 12095:1997-08

Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength; German version EN 12095:1997
8/1/1997 - PDF - German - DIN
Learn More

€32.34

DIN EN 12095:1997-08

Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength; German version EN 12095:1997
8/1/1997 - PDF - English - DIN
Learn More

€40.56

DIN EN 12099:1997-08

Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content; German version EN 12099:1997
8/1/1997 - PDF - German - DIN
Learn More

€32.34

DIN EN 12099:1997-08

Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content; German version EN 12099:1997
8/1/1997 - PDF - English - DIN
Learn More

€40.56

DIN EN 751-2:1997-08

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds; German version EN 751-2:1996
8/1/1997 - PDF - German - DIN
Learn More

€39.35

DIN EN 751-2:1997-08

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds; German version EN 751-2:1996
8/1/1997 - PDF - English - DIN
Learn More

€49.16

DIN EN 1514-1:1997-08

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 1514-1:1997
8/1/1997 - PDF - German - DIN
Learn More

€79.72

DIN EN 1514-1:1997-08

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 1514-1:1997
8/1/1997 - PDF - English - DIN
Learn More

€99.44

DIN EN 1514-3:1997-08

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets; German version EN 1514-3:1997
8/1/1997 - PDF - German - DIN
Learn More

€39.35

DIN EN 1514-3:1997-08

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets; German version EN 1514-3:1997
8/1/1997 - PDF - English - DIN
Learn More

€49.16

DIN EN 1514-4:1997-08

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated flat or grooved metallic and filled metallic gaskets for use with steel flanges; German version EN 1514-4:1997
8/1/1997 - PDF - German - DIN
Learn More

€45.98

DIN EN 1514-4:1997-08

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated flat or grooved metallic and filled metallic gaskets for use with steel flanges; German version EN 1514-4:1997
8/1/1997 - PDF - English - DIN
Learn More

€57.57

NBN EN 1514-1:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
7/18/1997 - PDF - French - NBN
Learn More

€37.00

NBN EN 1514-1:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
7/18/1997 - PDF - German - NBN
Learn More

€37.00

NBN EN 1514-1:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
7/18/1997 - PDF - English - NBN
Learn More

€37.00

NBN EN 1514-1:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
7/18/1997 - PDF - Dutch - NBN
Learn More

€37.00

NBN EN 1514-4:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
7/18/1997 - PDF - French - NBN
Learn More

€89.00

NBN EN 1514-4:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
7/18/1997 - PDF - German - NBN
Learn More

€89.00

NBN EN 1514-4:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
7/18/1997 - PDF - English - NBN
Learn More

€89.00

NBN EN 1514-4:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
7/18/1997 - PDF - Dutch - NBN
Learn More

€89.00

NBN EN 1514-3:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
7/18/1997 - PDF - French - NBN
Learn More

€89.00

NBN EN 1514-3:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
7/18/1997 - PDF - German - NBN
Learn More

€89.00

NBN EN 1514-3:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
7/18/1997 - PDF - English - NBN
Learn More

€89.00

NBN EN 1514-3:1997

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
7/18/1997 - PDF - Dutch - NBN
Learn More

€89.00

ISO 8032:1997 (R2020)

Rubber and plastics hose assemblies
Flexing combined with hydraulic impulse test (half-omega test)
7/17/1997 - Paper - English - ISO
Learn More

€48.00

ISO 8032:1997 (R2020)

Rubber and plastics hose assemblies
Flexing combined with hydraulic impulse test (half-omega test)
7/17/1997 - Paper - French - ISO
Learn More

€48.00

BS EN 728:1997

Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time
7/15/1997 - PDF - English - BSI
Learn More

€151.00

BS EN 1716:1997

Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee
7/15/1997 - PDF - English - BSI
Learn More

€151.00

BS EN 751-1:1997

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases hot water Anaerobic jointing compounds
7/15/1997 - PDF - English - BSI
Learn More

€151.00

BS EN 751-2:1997

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases hot water Non-hardening jointing compounds
7/15/1997 - PDF - English - BSI
Learn More

€151.00

DIN 7642:1997-07

Compression couplings - Ring type nipples for brazed connection
7/1/1997 - PDF - German - DIN
Learn More

€32.34

NF EN 1514-1, E29-902-1 (07/1997) (R2002)

Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 1 : non-metallic flat gaskets with or without inserts. - Brides et leurs assemblages
7/1/1997 - Paper - French - AFNOR
Learn More

€108.00

NF EN 1514-3, E29-902-3 (07/1997) (R2002)

Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 3 : non-metallic PTFE envelope gaskets. - Brides et leurs assemblages
7/1/1997 - Paper - French - AFNOR
Learn More

€75.50

NF EN 1514-4, E29-902-4 (07/1997) (R2002)

Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 4 : corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges. - Brides et leurs assemblages
7/1/1997 - Paper - French - AFNOR
Learn More

€75.50