23.040 : Pipeline components and pipelines
-
NF EN ISO 15876-3, T54-944-3 (12/2017)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3 : Fittings
12/1/2017 - Paper - French -
Learn More€73.23 -
€154.67
-
DIN EN 13480-6:2017-12
Metallic industrial piping - Part 6: Additional requirements for buried piping
12/1/2017 - PDF - English -
Learn More€131.40 -
DIN EN 13480-1:2017-12
Metallic industrial piping - Part 1: General, German version EN 13480-1:2017
12/1/2017 - PDF - German -
Learn More€72.80 -
NF EN ISO 2507-2, T54-024-2 (12/2017)
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2 : test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes - Tubes et raccords en matières thermoplastiques - Température de ramollissement Vicat - Partie 2 : Conditions particulières d'essai pour tubes et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) ou en poly(chlorure de vinyle) chloré (PVC-C) et tubes en poly(chlorure de vinyle) à
12/1/2017 - Paper - French -
Learn More€46.55 -
DIN EN 13480-6:2017-12
Metallic industrial piping - Part 6: Additional requirements for buried piping, German version EN 13480-6:2017.
12/1/2017 - PDF - German -
Learn More€104.95 -
VG 95970-3:2017-12
Replenishment at sea with liquids - Hose assemblies and fittings - Part 3: Split-clamp couplings, Text in German and English
12/1/2017 - PDF - English, German -
Learn More€82.60 -
DIN 86037-3:2017-12
Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 3: Loose flanges
12/1/2017 - PDF - German -
Learn More€39.35 -
€91.12
-
NF D36-135 (12/2017)
Unremovable joints - Corrugated metallic flexible piping/integrated rotary junction
12/1/2017 - Paper - French -
Learn More€48.00 -
€75.67
-
NF EN ISO 15876-2, T54-944-2 (12/2017)
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2 : Pipes - Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 2 : Tubes (ISO 15876-2:2003)
12/1/2017 - Paper - French -
Learn More€70.75 -
DIN EN 13480-4:2017-12
Metallic industrial piping - Part 4: Fabrication and installation
12/1/2017 - PDF - English -
Learn More€150.93 -
ISO 21307:2017 (R2023)
Plastics pipes and fittings
Butt fusion jointing procedures for polyethylene (PE) piping systems
11/30/2017 - Paper - English -
Learn More€110.00 -
NBN EN ISO 11173:2017
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13255:2017
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 3127:2017
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
11/22/2017 - PDF - French -
Learn More€58.00 -
NBN EN ISO 9852:2017
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 2507-3:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 13254:2017
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 2507-2:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 2507-1:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 2507-1:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13262:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 2507-3:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13254:2017
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13264:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 13263:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 11173:2017
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 13255:2017
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 3127:2017
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
11/22/2017 - PDF - German -
Learn More€58.00 -
NBN EN ISO 9852:2017
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 13264:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13263:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 2507-2:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 2507-1:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 13255:2017
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13262:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 2507-3:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 13254:2017
Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 2507-2:2017
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 11173:2017
Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 13262:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
11/22/2017 - PDF - French -
Learn More€37.00 -
NBN EN ISO 3127:2017
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method (ISO 3127:1994)
11/22/2017 - PDF - English -
Learn More€58.00 -
NBN EN ISO 9852:2017
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007)
11/22/2017 - PDF - English -
Learn More€37.00 -
NBN EN ISO 13264:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
11/22/2017 - PDF - German -
Learn More€37.00 -
NBN EN ISO 13263:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
11/22/2017 - PDF - German -
Learn More€37.00 -
€41.86
-
IEEE/CSA 844.1/CSA C22.2 No.293.1:2017
IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures - General, Testing, Marking, and Documentation Requirements
11/15/2017 - PDF - English -
Learn More€99.00 -
IEEE/CSA 844.1/CSA C22.2 No.293.1:2017
IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures - General, Testing, Marking, and Documentation Requirements
11/15/2017 - Paper - English -
Learn More€122.00 -
17/30347088 DC:2017
BS EN 10253-2. Butt-welding pipe fittings Part 2. Non alloy and ferritic steels with specific inspection requirements
11/14/2017 - PDF - English -
Learn More€43.00 -
17/30347091 DC:2017
BS EN 10253-4. Butt-welding pipe fittings Part 4. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
11/14/2017 - PDF - English -
Learn More€43.00 -
CEN/TS 15223:2017
Plastics piping systems - Validated design parameters of buried thermoplastics piping systems
11/6/2017 - PDF - German -
Learn More€142.00 -
CEN/TS 15223:2017
Plastics piping systems - Validated design parameters of buried thermoplastics piping systems
11/6/2017 - PDF - English -
Learn More€142.00 -
€192.00
-
SAE AS 85421/10D:2017-11-03
FITTING, ADAPTER, BEAM SEAL, 3000/4000 PSI, MALE TO FLARELESS
11/3/2017 - PDF - English -
Learn More€47.00 -
DIN 2459:2017-11
Inseparable elastomer sealed connectors made of metal for metallic pipes for use in drinking water system installation - General requirements and test methods
11/1/2017 - PDF - German -
Learn More€72.80 -
ASTM A192/A192M-17 + Redline
Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
11/1/2017 - PDF - English -
Learn More€53.00 -
17/30362692 DC:2017
BS EN 598. Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications. Products characteristics and test and assessment methods
11/1/2017 - PDF - English -
Learn More€24.00 -
XP E29-826 (11/2017)
Stainless steel pliable corrugated hose kits for gas with an operating pressure up to 2 bar
11/1/2017 - Paper - French -
Learn More€108.33 -
VG 95957:2017-11
Compensators - Bellows expansion joints and cylindrical compensators made of elastomers - Determination of dynamic stiffness, Text in German and English
11/1/2017 - PDF - English, German -
Learn More€65.89 -
ASTM A192/A192M-17
Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
11/1/2017 - PDF - English -
Learn More€46.00 -
DIN EN 10253-4:2017-11
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements, German and English version prEN 10253-4:2017
11/1/2017 - PDF - English, German -
Learn More€234.02 -
API RP 1177:2017
Recommended Practice for Steel Pipeline Construction Quality Management Systems, First Edition
11/1/2017 - PDF sécurisé - English -
Learn More€141.00 -
€39.35
-
ASTM F2536-17(2022)
Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
11/1/2017 - PDF - English -
Learn More€46.00 -
CEN/TR 14585-3:2017
Corrugated metal hose assemblies for pressure applications - Part 3: Design method
10/27/2017 - PDF - French -
Learn More€163.00 -
CEN/TR 14585-3:2017
Corrugated metal hose assemblies for pressure applications - Part 3: Design method
10/27/2017 - PDF - English -
Learn More€163.00 -
SAE J 527:2017-10-25
Brazed Double Wall Low-Carbon Steel Tubing (Stabilized: Oct 2017)
10/25/2017 - PDF - English -
Learn More€66.00 -
NBN EN ISO 13260:2011/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
10/25/2017 - PDF - French -
Learn More€20.00 -
NBN EN ISO 13260:2011/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
10/25/2017 - PDF - German -
Learn More€20.00 -
NBN EN ISO 13260:2011/A1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
10/25/2017 - PDF - English -
Learn More€20.00 -
€25.00
-
€25.00
-
UNE-EN 1453-1:2017
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system. (Consolidated version)
10/11/2017 - PDF - Spanish -
Learn More€73.00 -
UNE-EN 1453-1:2017
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system. (Consolidated version)
10/11/2017 - PDF - English -
Learn More€87.60 -
UNE-EN ISO 6806:2017
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
10/4/2017 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 6806:2017
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
10/4/2017 - PDF - English -
Learn More€81.60 -
NF EN ISO 9852, T54-006 (10/2017)
Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method
10/1/2017 - Paper - French -
Learn More€46.55 -
NF EN ISO 13263, T54-927 (10/2017)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
10/1/2017 - Paper - French -
Learn More€33.62 -
DIN 11864-1:2017-10
Stainless steel components for aseptic applications in the chemical and the pharmaceutical industries - Part 1: Connections
10/1/2017 - PDF - German -
Learn More€92.62 -
€51.00
-
DIN 4900-1:2017-10
Steel filter and solid wall pipes for wells - Part 1: Solid wall pipes and slot perforation filters.
10/1/2017 - PDF - German -
Learn More€52.90 -
EJMA Book of Standard 2017
Standards of the Expansion Joint Manufacturers Association, Tenth Edition 10th EJMA - PRINT VERSION
10/1/2017 - Paper - English -
Learn More€661.00 -
DIN EN 16821:2017-10
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses
10/1/2017 - PDF - English -
Learn More€91.12 -
DIN 4925-3:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 3: DN 250 to DN 400 with trapezoidal thread
10/1/2017 - PDF - English -
Learn More€66.07 -
UNE-CEN/TR 13480-7:2017
Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures (Endorsed by Asociación Española de Normalización in October of 2017.)
10/1/2017 - PDF - English -
Learn More€68.00 -
DIN EN 16820:2017-10
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining, German version EN 16820:2017
10/1/2017 - PDF - German -
Learn More€92.62 -
ASTM B302-17 + Redline
Standard Specification for Threadless Copper Pipe, Standard Sizes
10/1/2017 - PDF - English -
Learn More€61.00 -
NF EN ISO 13264, T54-939 (10/2017)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
10/1/2017 - Paper - French -
Learn More€46.55 -
DIN 4925-3:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 3: DN 250 to DN 400 with trapezoidal thread.
10/1/2017 - PDF - German -
Learn More€52.90 -
DIN 4925-1:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 1: DN 35 to DN 100 with pipe thread
10/1/2017 - PDF - English -
Learn More€57.57 -
€61.00
-
FD CEN/TR 13480-7, E86-700-7 (10/2017)
Metallic industrial piping - Part 7 : guidance on the use of conformity assessment procedures
10/1/2017 - Paper - French -
Learn More€86.50 -
NF EN ISO 13254, T54-901 (10/2017)
Thermoplastics piping systems for non-pressure applications - Test method for watertightness - Systèmes de canalisations thermoplastiques pour applications sans pression - Méthode d'essai de l'étanchéité à l'eau (ISO 13254:2010)
10/1/2017 - Paper - French -
Learn More€33.62 -
DIN 4925-1:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 1: DN 35 to DN 100 with pipe thread.
10/1/2017 - PDF - German -
Learn More€45.98 -
DIN 4900-2:2017-10
Steel filter and solid wall pipes for wells - Part 2: Wire wrapped screens made of stainless steel.
10/1/2017 - PDF - German -
Learn More€45.98 -
EJMA Book of Standard 2017
Standards of the Expansion Joint Manufacturers Association, Tenth Edition 10th EJMA - ADOBE DRM
Note: This eBook can only be opened on 1 device and no printing or copying of the content is allowed.
10/1/2017 - PDF DRM - English -
Learn More€540.00 -
FD CEN/TR 16395, M50-033 (10/2017)
Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document
10/1/2017 - Paper - French -
Learn More€60.67 -
UNE-EN ISO 14692-2:2017
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017) (Endorsed by Asociación Española de Normalización in October of 2017.)
10/1/2017 - PDF - English -
Learn More€119.00 -
DIN EN 16821:2017-10
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses, German version EN 16821:2017
10/1/2017 - PDF - German -
Learn More€72.80 -
DIN 4726:2017-10
Warm water surface heating systems and radiator connecting systems - Plastics piping systems and multilayer piping systems
10/1/2017 - PDF - German -
Learn More€72.80 -
NF EN ISO 13255, T54-902 (10/2017)
Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
10/1/2017 - Paper - French -
Learn More€33.62 -
DIN EN 16820:2017-10
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
10/1/2017 - PDF - English -
Learn More€115.98 -
DIN 4925-2:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 2: DN 100 to DN 200 with trapezoidal thread
10/1/2017 - PDF - English -
Learn More€74.58 -
ASTM B302-17
Standard Specification for Threadless Copper Pipe, Standard Sizes
10/1/2017 - PDF - English -
Learn More€51.00 -
NF EN ISO 13262, T54-925 (10/2017)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
10/1/2017 - Paper - French -
Learn More€33.62 -
DIN 4925-2:2017-10
Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part 2: DN 100 to DN 200 with trapezoidal thread.
10/1/2017 - PDF - German -
Learn More€59.63 -
BS EN ISO 6134:2017
Rubber hoses and hose assemblies for saturated steam. Specification
9/30/2017 - PDF - English -
Learn More€180.00 -
BS ISO 8179-2:2017
Ductile iron pipes, fittings, accessories and their joints - External zinc-based coating Part 2: Zinc-rich paint
9/30/2017 - PDF - English -
Learn More€151.00 -
PD ISO/TS 12512:2017
Glass reinforced thermosetting plastic (GRP) pipes. Determination of initial specific ring stiffness using segment test species cut from a pipe
9/22/2017 - PDF - English -
Learn More€250.00 -
€36.27
-
BS ISO 8179-1:2017
Ductile iron pipes, fittings, accessories and their joints. External zinc-based coating Metallic zinc with finishing layer
9/13/2017 - PDF - English -
Learn More€180.00 -
NF EN ISO 13260/A1, P16-360/A1 (09/2017)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1
9/1/2017 - Paper - French -
Learn More€25.50 -
ASTM D3567-17(2022)
Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
9/1/2017 - PDF - English -
Learn More€46.00 -
DIN EN ISO 6806:2017-09
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
9/1/2017 - PDF - English -
Learn More€99.44 -
DIN EN 1453-1:2017-09
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system, German version EN 1453-1:2017 + AC:2017
9/1/2017 - PDF - German -
Learn More€99.35 -
DIN EN 1453-1:2017-09
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system (includes Corrigendum :2017)
9/1/2017 - PDF - English -
Learn More€124.21 -
DIN EN ISO 6806:2017-09
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017), German version EN ISO 6806:2017
9/1/2017 - PDF - German -
Learn More€79.72 -
17/30339710 DC:2017
BS ISO 21138-3. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 3. Pipes and fittings with non-smooth external surface, Type B
8/29/2017 - PDF - English -
Learn More€24.00 -
BS EN 16820:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining
8/25/2017 - PDF - English -
Learn More€250.00 -
PD CEN/TR 13480-7:2017
Metallic industrial piping Guidance on the use of conformity assessment procedures
8/25/2017 - PDF - English -
Learn More€180.00 -
BS EN 16821:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Silicone rubber hoses
8/25/2017 - PDF - English -
Learn More€180.00 -
17/30339707 DC:2017
BS ISO 21138-2. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 2. Pipes and fittings with smooth external surface, Type A
8/23/2017 - PDF - English -
Learn More€24.00 -
€25.00
-
BS ISO 12176-1:2017
Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Butt
8/16/2017 - PDF - English -
Learn More€293.00 -
ISO 13260:2010/Amd 1:2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage
Test method for resistance to combined temperature cycling and external loading
8/11/2017 - Paper - French -
Learn More€21.00 -
NF EN 16820, T47-279 (08/2017)
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining - Flexibles pour utilisation dans les industries pharmaceutique et biotechnologique avec tuyaux sans matériaux métalliques - Tuyaux en élastomère avec et sans revêtement
8/1/2017 - Paper - French -
Learn More€83.85 -
DIN 11853-1:2017-08
Stainless steel components for hygienic applications in the food and the chemical industries - Part 1: Connections
8/1/2017 - PDF - German -
Learn More€85.79 -
€72.80
-
NF EN 16821, T47-216 (08/2017)
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses - Flexibles pour utilisation dans les industries pharmaceutique et biotechnologique avec tuyaux sans matériaux métalliques - Tuyaux en silicone
8/1/2017 - Paper - French -
Learn More€73.23 -
DIN 11853-3:2017-08
Stainless steel components for hygienic applications in the food and the chemical industries - Part 3: Clamp connections
8/1/2017 - PDF - German -
Learn More€79.72 -
DIN 11853-2:2017-08
Stainless steel components for hygienic applications in the food and the chemical industries - Part 2: Flange connections
8/1/2017 - PDF - German -
Learn More€85.79 -
CEN/TR 13480-7:2017
Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures
7/28/2017 - PDF - English -
Learn More€89.00 -
CEN/TR 13480-7:2017
Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures
7/28/2017 - PDF - French -
Learn More€89.00 -
CEN/TR 13480-7:2017
Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures
7/28/2017 - PDF - German -
Learn More€89.00 -
BS ISO 13761:2017
Plastics pipes and fittings. Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 °C
7/28/2017 - PDF - English -
Learn More€180.00 -
PD ISO/TS 20656-1:2017
Plastics piping systems. General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes Buried
7/28/2017 - PDF - English -
Learn More€293.00 -
UNE-CEN/TS 1453-2:2017 (R2020)
Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
7/26/2017 - PDF - Spanish -
Learn More€68.00 -
UNE-CEN/TS 1453-2:2017 (R2020)
Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
7/26/2017 - PDF - English -
Learn More€81.60 -
ISO 8179-1:2017 (R2023)
Ductile iron pipes, fittings, accessories and their joints
External zinc-based coating
7/25/2017 - Paper - English -
Learn More€72.00 -
ISO 8179-2:2017 (R2023)
Ductile iron pipes, fittings, accessories and their joints
External zinc-based coating
7/25/2017 - Paper - English -
Learn More€72.00 -
€142.00
-
€205.00
-
NBN EN 13480-8:2017
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
7/19/2017 - PDF - English -
Learn More€163.00 -
NBN EN 16820:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
7/19/2017 - PDF - German -
Learn More€121.00 -
€205.00
-
€58.00
-
NBN EN 13480-6:2017
Metallic industrial piping - Part 6: Additional requirements for buried piping
7/19/2017 - PDF - German -
Learn More€89.00 -
NBN EN 13480-8:2017
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
7/19/2017 - PDF - French -
Learn More€163.00 -
NBN EN 16821:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses
7/19/2017 - PDF - English -
Learn More€89.00 -
NBN EN 13480-4:2017
Metallic industrial piping - Part 4: Fabrication and installation
7/19/2017 - PDF - English -
Learn More€163.00 -
€142.00
-
€205.00
-
NBN EN 16821:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses
7/19/2017 - PDF - French -
Learn More€89.00 -
NBN EN 13480-4:2017
Metallic industrial piping - Part 4: Fabrication and installation
7/19/2017 - PDF - French -
Learn More€163.00 -
NBN EN 16820:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
7/19/2017 - PDF - English -
Learn More€121.00 -
€205.00
-
€58.00
-
€142.00
-
NBN EN 13480-6:2017
Metallic industrial piping - Part 6: Additional requirements for buried piping
7/19/2017 - PDF - English -
Learn More€89.00 -
NBN EN 13480-8:2017
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
7/19/2017 - PDF - German -
Learn More€163.00 -
NBN EN 16820:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
7/19/2017 - PDF - French -
Learn More€121.00 -
€205.00
-
ISO/TS 12512:2017 (R2021)
Glass reinforced thermosetting plastic (GRP) pipes
Determination of initial specific ring stiffness using segment test species cut from a pipe
7/19/2017 - Paper - English -
Learn More€148.00 -
NBN EN 13480-6:2017
Metallic industrial piping - Part 6: Additional requirements for buried piping
7/19/2017 - PDF - French -
Learn More€89.00 -
€205.00
-
NBN EN 16821:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses
7/19/2017 - PDF - German -
Learn More€89.00 -
NBN EN 13480-4:2017
Metallic industrial piping - Part 4: Fabrication and installation
7/19/2017 - PDF - German -
Learn More€163.00 -
€58.00
-
ISO 13761:2017 (R2023)
Plastics pipes and fittings
Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
7/18/2017 - Paper - English -
Learn More€48.00 -
UNE-EN ISO 15876-1:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017)
7/12/2017 - PDF - English -
Learn More€75.60 -
UNE-EN ISO 15876-5:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
7/12/2017 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 15876-3:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017)
7/12/2017 - PDF - Spanish -
Learn More€70.00 -
UNE-EN ISO 15876-2:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017)
7/12/2017 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 15876-5:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
7/12/2017 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 15876-1:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017)
7/12/2017 - PDF - Spanish -
Learn More€63.00 -
UNE-EN ISO 15876-3:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017)
7/12/2017 - PDF - English -
Learn More€84.00 -
UNE-EN ISO 15876-2:2017
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017)
7/12/2017 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 6803:2017
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
7/5/2017 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 6803:2017
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
7/5/2017 - PDF - English -
Learn More€72.00 -
DIN EN ISO 6803:2017-07
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017), German version EN ISO 6803:2017
7/1/2017 - PDF - German -
Learn More€59.63 -
DIN EN ISO 15493:2017-07
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003 + Amd 1:2016 + Cor 1:2004) (includes Amendment :2017)
7/1/2017 - PDF - English -
Learn More€197.38 -
ASTM B338-17(2021)
Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
7/1/2017 - PDF - English -
Learn More€51.00 -
DIN EN 752:2017-07
Drain and sewer systems outside buildings - Sewer system management
7/1/2017 - PDF - English -
Learn More€230.75 -
€43.76
-
DVGW GW 326:2017-07
Mechanical Joining of PE Pipes in Gas and Water Distribution (Networks) - Competent Person and Supervisor - Requirements and Qualification
7/1/2017 - PDF - German -
Learn More€43.76 -
ASTM B338-17(2021) + Redline
Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
7/1/2017 - PDF - English -
Learn More€61.00 -
DIN EN 752:2017-07
Drain and sewer systems outside buildings - Sewer system management, German version EN 752:2017
7/1/2017 - PDF - German -
Learn More€184.58 -
DIN EN ISO 6803:2017-07
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
7/1/2017 - PDF - English -
Learn More€74.58 -
DIN EN ISO 15493:2017-07
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003 + Amd 1:2016 + Cor 1:2004), German version EN ISO 15493:2003 + A1:2017
7/1/2017 - PDF - German -
Learn More€158.04 -
ISO 7510:2017 (R2022)
Plastics piping systems
Glass-reinforced plastics (GRP) components
6/28/2017 - Paper - English -
Learn More€48.00 -
BS ISO 16611:2017
Plastics piping systems for drainage and sewerage without pressure. Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP). Dimensions, requirements and tests
6/22/2017 - PDF - English -
Learn More€293.00 -
ISO 18468:2017 (R2023)
Ductile iron fittings, accessories and their joints and valves
Epoxy coating
6/15/2017 - Paper - English -
Learn More€72.00 -
ISO/TS 20656-1:2017 (R2023)
Plastics piping systems
General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes
6/13/2017 - Paper - English -
Learn More€148.00 -
17/30344317 DC:2017
BS ISO 49 AMD1. Malleable cast iron fittings threaded to ISO 7-1
6/7/2017 - PDF - English -
Learn More€24.00 -
NF EN 752, P16-150 (06/2017)
Drain and sewer systems outside buildings - Sewer system management Drain and sewer systems outside buildings - Sewer system management
6/1/2017 - Paper - French -
Learn More€154.67 -
DIN EN ISO 15876-1:2017-06
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017), German and English version EN ISO 15876-1:2017.
6/1/2017 - PDF - English, German -
Learn More€79.72 -
DVS 2205-4:2017-06
Berechnung von Behältern und Apparaten aus Thermoplasten - Flanschverbindungen
6/1/2017 - - -
Learn More€57.38 -
DIN EN ISO 6134:2017-06
Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017)
6/1/2017 - PDF - English -
Learn More€99.44