23.040 : Pipeline components and pipelines

Items 3001 to 3200 of 8221 total

Set Ascending Direction
per page

List  Grid 

  • MSS SP-43-2019

    Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
    1/1/2019 - PDF sécurisé - English - MSS
    Learn More
    €132.00

  • ASTM C1214M-19

    Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
    1/1/2019 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM C1214M-19 + Redline

    Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
    1/1/2019 - PDF - English - ASTM
    Learn More
    €53.00

  • ASTM C1214-19

    Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
    1/1/2019 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM C1214-19 + Redline

    Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
    1/1/2019 - PDF - English - ASTM
    Learn More
    €53.00

  • ASTM C969M-19

    Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
    1/1/2019 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM C969M-19 + Redline

    Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
    1/1/2019 - PDF - English - ASTM
    Learn More
    €57.00

  • ASTM C969-19

    Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
    1/1/2019 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM C969-19 + Redline

    Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
    1/1/2019 - PDF - English - ASTM
    Learn More
    €57.00

  • MSS SP-75-2019

    High-Strength, Wrought, Butt-Welding Fittings
    1/1/2019 - PDF sécurisé - English - MSS
    Learn More
    €161.00

  • ASTM F2165-19

    Standard Specification for Flexible Pre-Insulated Plastic Piping
    1/1/2019 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM F2165-19 + Redline

    Standard Specification for Flexible Pre-Insulated Plastic Piping
    1/1/2019 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM F3240-19(2023)

    Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG) for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main and Lateral Pipelines
    1/1/2019 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM F3240-19(2023) + Redline

    Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG) for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main and Lateral Pipelines
    1/1/2019 - PDF - English - ASTM
    Learn More
    €72.00

  • UNE-EN ISO 15874-2:2013/A1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
    12/26/2018 - PDF - Spanish - AENOR
    Learn More
    €39.00

  • UNE-EN ISO 15874-2:2013/A1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018)
    12/26/2018 - PDF - English - AENOR
    Learn More
    €46.80

  • UNE-EN ISO 15874-3:2013/A1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
    12/26/2018 - PDF - Spanish - AENOR
    Learn More
    €34.00

  • UNE-EN ISO 15874-3:2013/A1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018)
    12/26/2018 - PDF - English - AENOR
    Learn More
    €40.80

  • UNE-EN ISO 15874-5:2013/A1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
    12/26/2018 - PDF - Spanish - AENOR
    Learn More
    €46.00

  • UNE-EN ISO 15874-5:2013/A1:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018)
    12/26/2018 - PDF - English - AENOR
    Learn More
    €55.20

  • UNE-EN ISO 21225-1:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
    12/26/2018 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN ISO 21225-1:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018)
    12/26/2018 - PDF - English - AENOR
    Learn More
    €88.80

  • UNE-EN ISO 21225-2:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
    12/26/2018 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN ISO 21225-2:2018

    Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018)
    12/26/2018 - PDF - English - AENOR
    Learn More
    €88.80

  • CEN ISO/TS 15877-7:2018

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018)
    12/25/2018 - PDF - German - NBN
    Learn More
    €58.00

  • CEN ISO/TS 15877-7:2018

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018)
    12/25/2018 - PDF - English - NBN
    Learn More
    €58.00

  • CEN ISO/TS 15874-7:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2018)
    12/25/2018 - PDF - German - NBN
    Learn More
    €89.00

  • CEN ISO/TS 15874-7:2018

    Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2018)
    12/25/2018 - PDF - English - NBN
    Learn More
    €89.00

  • CEN ISO/TS 15875-7:2018

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2018)
    12/25/2018 - PDF - German - NBN
    Learn More
    €89.00

  • CEN ISO/TS 15875-7:2018

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2018)
    12/25/2018 - PDF - English - NBN
    Learn More
    €89.00

  • CEN ISO/TS 15876-7:2018

    Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2018)
    12/25/2018 - PDF - German - NBN
    Learn More
    €89.00

  • CEN ISO/TS 15876-7:2018

    Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2018)
    12/25/2018 - PDF - English - NBN
    Learn More
    €89.00

  • CEN ISO/TS 22391-7:2018

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2018)
    12/21/2018 - PDF - German - NBN
    Learn More
    €58.00

  • CEN ISO/TS 22391-7:2018

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2018)
    12/21/2018 - PDF - English - NBN
    Learn More
    €58.00

  • BS EN ISO 13257:2018

    Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
    12/19/2018 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN ISO 11299-3:2018

    Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes
    12/12/2018 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 11299-1:2018

    Plastics piping systems for renovation of underground gas supply networks General
    12/11/2018 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 11299-2:2018

    Plastics piping systems for renovation of underground gas supply networks Lining with continuous pipes
    12/11/2018 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN ISO 19893:2018

    Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling
    12/7/2018 - PDF - English - BSI
    Learn More
    €151.00

  • DIN EN ISO 13056:2018-12

    Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011), German version EN ISO 13056:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €45.98

  • DIN EN 13480-2/A1:2018-12

    Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A1:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €52.90

  • DIN EN 13480-2/A2:2018-12

    Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A2:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €39.35

  • DIN EN 13480-2/A3:2018-12

    Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A3:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €32.34

  • DIN EN ISO 13056:2018-12

    Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
    12/1/2018 - PDF - English - DIN
    Learn More
    €57.57

  • DIN EN ISO 20769-1:2018-12

    Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018), German version EN ISO 20769-1:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €126.26

  • DIN EN ISO 20769-2:2018-12

    Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018), German version EN ISO 20769-2:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €115.33

  • NF EN 15655-1, A48-655-1 (12/2018)

    Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1 : polyurethane lining of pipes and fittings - Tuyaux, raccords et accessoires en fonte ductile - Revêtement intérieur en polyuréthane des tuyaux et raccords - Prescriptions et méthodes d'essais
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €73.00

  • DIN EN ISO 19893:2018-12

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011), German version EN ISO 19893:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €65.89

  • DIN EN ISO 19893:2018-12

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
    12/1/2018 - PDF - English - DIN
    Learn More
    €82.52

  • DIN EN ISO 11298-3:2018-12

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018), German version EN ISO 11298-3:2018.
    12/1/2018 - PDF - German - DIN
    Learn More
    €85.79

  • NF EN ISO 11299-3, T54-966-3 (12/2018)

    Plastics piping systems for renovation of underground gas supply networks - Part 3 : lining with close-fit pipes
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €73.23

  • NF EN ISO 11299-1, T54-966-1 (12/2018)

    Plastics piping systems for renovation of underground gas supply networks - Part 1 : general
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €73.23

  • NF EN ISO 13257, T54-903 (12/2018)

    Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €60.50

  • DIN EN ISO 19892:2018-12

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011), German version EN ISO 19892:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €45.98

  • DIN EN 1092-1:2018-12

    Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
    12/1/2018 - PDF - English - DIN
    Learn More
    €292.52

  • DIN EN ISO 19892:2018-12

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
    12/1/2018 - PDF - English - DIN
    Learn More
    €57.57

  • DIN EN 1092-1:2018-12

    Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges, German version EN 1092-1:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €234.02

  • DIN 14811/A3:2018-12

    Fire-fighting hoses - Non-percolating layflat delivery hoses and hose assemblies for pumps and vehicles, Amendment A3
    12/1/2018 - PDF - German - DIN
    Learn More
    €22.99

  • DIN EN ISO 6802:2018-12

    Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018), German version EN ISO 6802:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €65.89

  • NF EN 16436-2, D36-381-2 (12/2018)

    Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 2 : assemblies
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €75.50

  • NBN EN ISO 15494:2018

    Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
    11/27/2018 - PDF - French - NBN
    Learn More
    €205.00

  • NBN EN ISO 15494:2018

    Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
    11/27/2018 - PDF - German - NBN
    Learn More
    €205.00

  • NBN EN ISO 15494:2018

    Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
    11/27/2018 - PDF - English - NBN
    Learn More
    €205.00

  • NBN EN 13480-2:2017/A3:2018

    Metallic industrial piping - Part 2: Materials
    11/27/2018 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN 13480-2:2017/A3:2018

    Metallic industrial piping - Part 2: Materials
    11/27/2018 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN 13480-2:2017/A3:2018

    Metallic industrial piping - Part 2: Materials
    11/27/2018 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN 13480-2:2017/A2:2018

    Metallic industrial piping - Part 2: Materials
    11/27/2018 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN 13480-2:2017/A2:2018

    Metallic industrial piping - Part 2: Materials
    11/27/2018 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN 13480-2:2017/A2:2018

    Metallic industrial piping - Part 2: Materials
    11/27/2018 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN 13480-2:2017/A1:2018

    Metallic industrial piping - Part 2: Materials
    11/27/2018 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN 13480-2:2017/A1:2018

    Metallic industrial piping - Part 2: Materials
    11/27/2018 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN 13480-2:2017/A1:2018

    Metallic industrial piping - Part 2: Materials
    11/27/2018 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 11297-3:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
    11/27/2018 - PDF - French - NBN
    Learn More
    €89.00

  • NBN EN ISO 11297-3:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
    11/27/2018 - PDF - German - NBN
    Learn More
    €89.00

  • NBN EN ISO 11297-3:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
    11/27/2018 - PDF - English - NBN
    Learn More
    €89.00

  • NBN EN ISO 11298-3:2018

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    11/27/2018 - PDF - French - NBN
    Learn More
    €89.00

  • NBN EN ISO 11298-3:2018

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    11/27/2018 - PDF - German - NBN
    Learn More
    €89.00

  • NBN EN ISO 11298-3:2018

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    11/27/2018 - PDF - English - NBN
    Learn More
    €89.00

  • NBN EN ISO 6802:2018

    Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018)
    11/27/2018 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN ISO 6802:2018

    Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018)
    11/27/2018 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN ISO 6802:2018

    Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018)
    11/27/2018 - PDF - English - NBN
    Learn More
    €58.00

  • ASTM F2098-18

    Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings
    11/15/2018 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM F2098-18 + Redline

    Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings
    11/15/2018 - PDF - English - ASTM
    Learn More
    €61.00

  • BS EN ISO 3127:2017

    Thermoplastics pipes. Determination of resistance to external blows. Round-the-clock method
    11/9/2018 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN ISO 9852:2017

    Unplasticized poly(vinyl chloride) (PVC-U) pipes. Dichloromethane resistance at specified temperature (DCMT). Test method
    11/9/2018 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN ISO 20769-1:2018

    Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X - gamma rays Tangential radiographic
    11/8/2018 - PDF - English - BSI
    Learn More
    €331.00

  • BS EN ISO 20769-2:2018

    Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- gamma rays Double wall radiographic
    11/8/2018 - PDF - English - BSI
    Learn More
    €293.00

  • BS EN ISO 13254:2017

    Thermoplastics piping systems for non-pressure applications. Test method for watertightness
    11/8/2018 - PDF - English - BSI
    Learn More
    €151.00

  • ISO 13257:2018

    Thermoplastics piping systems for non-pressure applications
    Test method for resistance to elevated temperature cycling
    11/8/2018 - Paper - French - ISO
    Learn More
    €72.00

  • ISO 13257:2018

    Thermoplastics piping systems for non-pressure applications
    Test method for resistance to elevated temperature cycling
    11/8/2018 - Paper - English - ISO
    Learn More
    €72.00

  • BS EN ISO 11173:2017

    Thermoplastics pipes. Determination of resistance to external blows. Staircase method
    11/7/2018 - PDF - English - BSI
    Learn More
    €151.00

  • UNE-EN ISO 11297-1:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
    11/7/2018 - PDF - Spanish - AENOR
    Learn More
    €70.00

  • UNE-EN ISO 11297-1:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018)
    11/7/2018 - PDF - English - AENOR
    Learn More
    €84.00

  • UNE-EN ISO 11298-1:2018

    Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
    11/7/2018 - PDF - Spanish - AENOR
    Learn More
    €70.00

  • UNE-EN ISO 11298-1:2018

    Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
    11/7/2018 - PDF - English - AENOR
    Learn More
    €84.00

  • UNE-EN ISO 11296-4:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
    11/7/2018 - PDF - Spanish - AENOR
    Learn More
    €98.00

  • UNE-EN ISO 11296-4:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
    11/7/2018 - PDF - English - AENOR
    Learn More
    €117.60

  • DIN EN 13480-4/A1:2018-11

    Metallic industrial piping - Part 4: Fabrication and installation, German and English version EN 13480-4:2017/prA1:2018
    11/1/2018 - PDF - English, German - DIN
    Learn More
    €39.35

  • ASTM A333/A333M-18

    Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
    11/1/2018 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM A333/A333M-18 + Redline

    Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
    11/1/2018 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM A1024/A1024M-18

    Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
    11/1/2018 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM A1024/A1024M-18 + Redline

    Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
    11/1/2018 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM A1098/A1098M-18(2022)

    Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
    11/1/2018 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM A1098/A1098M-18(2022) + Redline

    Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
    11/1/2018 - PDF - English - ASTM
    Learn More
    €65.00

  • ASTM A377-18(2022)e1

    Standard Index of Specifications for Ductile Iron Pressure Pipe
    11/1/2018 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM A377-18(2022)e1 + Redline

    Standard Index of Specifications for Ductile Iron Pressure Pipe
    11/1/2018 - PDF - English - ASTM
    Learn More
    €57.00

  • ASTM A716-18(2022)

    Standard Specification for Ductile Iron Culvert Pipe
    11/1/2018 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM A716-18(2022) + Redline

    Standard Specification for Ductile Iron Culvert Pipe
    11/1/2018 - PDF - English - ASTM
    Learn More
    €65.00

  • ASTM A746-18(2022)

    Standard Specification for Ductile Iron Gravity Sewer Pipe
    11/1/2018 - PDF - English - ASTM
    Learn More
    €78.00

  • ASTM A746-18(2022) + Redline

    Standard Specification for Ductile Iron Gravity Sewer Pipe
    11/1/2018 - PDF - English - ASTM
    Learn More
    €93.00

  • ASTM B516-18

    Standard Specification for Welded Nickel-Chromium-Aluminum Alloy (UNS N06699) and Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes
    11/1/2018 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM B516-18 + Redline

    Standard Specification for Welded Nickel-Chromium-Aluminum Alloy (UNS N06699) and Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes
    11/1/2018 - PDF - English - ASTM
    Learn More
    €53.00

  • PR NF EN 13480-9, E86-700-9PR (11/2018)

    Tuyauteries industrielles métalliques - Partie 9 : exigences complémentaires relatives aux tuyauteries en nickel et alliages de nickel
    11/1/2018 - Paper - French - AFNOR
    Learn More
    €64.50

  • DIN 16875:2018-11

    Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for ducting - Dimensions and technical delivery conditions
    11/1/2018 - PDF - German - DIN
    Learn More
    €79.72

  • ASTM F645-18b

    Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
    11/1/2018 - PDF - English - ASTM
    Learn More
    €57.00

  • ASTM F645-18b + Redline

    Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
    11/1/2018 - PDF - English - ASTM
    Learn More
    €68.00

  • DIN 86044-2:2018-11

    Exhaust gas lines on ships - Flanges - Part 2: Light design
    11/1/2018 - PDF - German - DIN
    Learn More
    €39.35

  • ASTM E3101-18

    Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints
    11/1/2018 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM E3101-18 + Redline

    Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints
    11/1/2018 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM E3102-18

    Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application
    11/1/2018 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM E3102-18 + Redline

    Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application
    11/1/2018 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM E3167/E3167M-18(2023)

    Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints
    11/1/2018 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM E3167/E3167M-18(2023) + Redline

    Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints
    11/1/2018 - PDF - English - ASTM
    Learn More
    €72.00

  • ASTM E3170/E3170M-18(2023)

    Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints
    11/1/2018 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM E3170/E3170M-18(2023) + Redline

    Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints
    11/1/2018 - PDF - English - ASTM
    Learn More
    €72.00

  • DIN EN 560:2018-11

    Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
    11/1/2018 - PDF - English - DIN
    Learn More
    €82.52

  • DIN EN 560:2018-11

    Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes, German version EN 560:2018
    11/1/2018 - PDF - German - DIN
    Learn More
    €65.89

  • ASTM F1674-18

    Standard Test Method for Joint Restraint Products for Use with PVC Pipe
    11/1/2018 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM F1674-18 + Redline

    Standard Test Method for Joint Restraint Products for Use with PVC Pipe
    11/1/2018 - PDF - English - ASTM
    Learn More
    €53.00

  • UNE-EN 752:2018

    Drain and sewer systems outside buildings - Sewer system management
    10/31/2018 - PDF - Spanish - AENOR
    Learn More
    €132.00

  • UNE-EN 752:2018

    Drain and sewer systems outside buildings - Sewer system management
    10/31/2018 - PDF - English - AENOR
    Learn More
    €158.40

  • BS EN ISO 6802:2018

    Rubber or plastics hoses and hose assemblies. Hydraulic impulse test with flexing
    10/31/2018 - PDF - English - BSI
    Learn More
    €180.00

  • NBN EN ISO 13056:2018

    Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
    10/30/2018 - PDF - French - NBN
    Learn More
    €37.00

  • NBN EN ISO 13056:2018

    Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
    10/30/2018 - PDF - German - NBN
    Learn More
    €37.00

  • NBN EN ISO 13056:2018

    Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
    10/30/2018 - PDF - English - NBN
    Learn More
    €37.00

  • NBN EN ISO 19893:2018

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
    10/30/2018 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN ISO 19893:2018

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
    10/30/2018 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN ISO 19893:2018

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
    10/30/2018 - PDF - English - NBN
    Learn More
    €58.00

  • NBN T 42-010:2018

    Polyethylene (PE) piping systems ? Directives for the execution of butt fusion and electrofusion joints
    10/30/2018 - PDF - French - NBN
    Learn More
    €89.00

  • NBN T 42-010:2018

    Polyethylene (PE) piping systems ? Directives for the execution of butt fusion and electrofusion joints
    10/30/2018 - PDF - Dutch - NBN
    Learn More
    €89.00

  • NBN T 42-011:2018

    Polyethylene (PE) piping systems ? Directives for the formation, qualification and re-approval of welders executing butt fusion and electrofusion
    10/30/2018 - PDF - French - NBN
    Learn More
    €58.00

  • NBN T 42-011:2018

    Polyethylene (PE) piping systems ? Directives for the formation, qualification and re-approval of welders executing butt fusion and electrofusion
    10/30/2018 - PDF - Dutch - NBN
    Learn More
    €58.00

  • NBN EN ISO 19892:2018

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
    10/30/2018 - PDF - French - NBN
    Learn More
    €37.00

  • NBN EN ISO 19892:2018

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
    10/30/2018 - PDF - German - NBN
    Learn More
    €37.00

  • NBN EN ISO 19892:2018

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
    10/30/2018 - PDF - English - NBN
    Learn More
    €37.00

  • NBN EN 560:2018

    Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
    10/30/2018 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN 560:2018

    Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
    10/30/2018 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN 560:2018

    Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
    10/30/2018 - PDF - English - NBN
    Learn More
    €58.00

  • ASME B16.9-2018

    Factory-Made Wrought Buttwelding Fittings
    10/29/2018 - Papier - English - ASME
    Learn More
    €228.00

  • ISO 11299-2:2018

    Plastics piping systems for renovation of underground gas supply networks
    Part 2: Lining with continuous pipes
    10/26/2018 - Paper - French - ISO
    Learn More
    €72.00

  • ISO 11299-2:2018

    Plastics piping systems for renovation of underground gas supply networks
    Part 2: Lining with continuous pipes
    10/26/2018 - Paper - English - ISO
    Learn More
    €72.00

  • BS EN ISO 11298-3:2018

    Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes
    10/18/2018 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 11297-3:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes
    10/17/2018 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 13056:2018

    Plastics piping systems. Pressure systems for hot and cold water. Test method for leaktightness under vacuum
    10/11/2018 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN ISO 19892:2018

    Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
    10/11/2018 - PDF - English - BSI
    Learn More
    €151.00

  • UNE-EN 13476-1:2018

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics
    10/10/2018 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN 13476-1:2018

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics
    10/10/2018 - PDF - English - AENOR
    Learn More
    €88.80

  • 18/30377463 DC:2018

    BS EN 13480-4 AMD1. Metallic industrial piping Part 4. Fabrication and installation
    10/9/2018 - PDF - English - BSI
    Learn More
    €24.00

  • 18/30377460 DC:2018

    BS EN 13480-9. Metallic industrial piping Part 9. Additional requirements for nickel and alloys
    10/9/2018 - PDF - English - BSI
    Learn More
    €24.00

  • DIN EN 1451-1:2018-10

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system (includes Corrigendum :2018)
    10/1/2018 - PDF - English - DIN
    Learn More
    €150.93

  • DIN EN 13476-1:2018-10

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characteristics
    10/1/2018 - PDF - English - DIN
    Learn More
    €115.98

  • DIN 2403:2018-10

    Identification of pipelines according to the fluid conveyed
    10/1/2018 - PDF - English - DIN
    Learn More
    €82.52

  • DIN 2403:2018-10

    Identification of pipelines according to the fluid conveyed
    10/1/2018 - PDF - German - DIN
    Learn More
    €65.89

  • DIN EN 1451-1:2018-10

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system, German version EN 1451-1:2017+AC:2018
    10/1/2018 - PDF - German - DIN
    Learn More
    €120.84

  • DIN EN 13476-1:2018-10

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characteristics, German version EN 13476-1:2018
    10/1/2018 - PDF - German - DIN
    Learn More
    €92.62

  • NF EN ISO 20769-1, A09-254-1 (10/2018)

    Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Part 1 : tangential radiographic inspection
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €104.67

  • NF EN ISO 20769-2, A09-254-2 (10/2018)

    Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Part 2 : double wall radiographic inspection
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €96.12

  • NF EN 13480-2 V1/A3, E86-700-2/A3 (10/2018)

    Metallic industrial piping - Part 2 : materials
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €23.00

  • NF EN 13480-2 V1/A1, E86-700-2/A1 (10/2018)

    Metallic industrial piping - Part 2 : materials
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €43.50

  • NF EN 13480-2 V1/A2, E86-700-2/A2 (10/2018)

    Metallic industrial piping - Part 2 : materials
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €31.00

  • NF EN ISO 11298-3, T54-967-3 (10/2018)

    Plastics piping systems for renovation of underground water supply networks - Part 3 : lining with close-fit pipes
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €73.23

  • DIN EN 13480-9:2018-10

    Metallic industrial piping - Part 9: Additional requirements for nickel and nickel alloys piping, German and English version prEN 13480-9:2018
    10/1/2018 - PDF - English, German - DIN
    Learn More
    €79.72

  • ASTM B111/B111M-18a

    Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
    10/1/2018 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM B111/B111M-18a + Redline

    Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
    10/1/2018 - PDF - English - ASTM
    Learn More
    €72.00

  • ASTM B523/B523M-18(2023)

    Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
    10/1/2018 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM B523/B523M-18(2023) + Redline

    Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
    10/1/2018 - PDF - English - ASTM
    Learn More
    €65.00

  • NF EN ISO 11297-3, P16-378-3 (10/2018)

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3 : lining with close-fit pipes
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €75.50

  • NF EN ISO 15494, T54-946 (10/2018)

    Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Systèmes de canalisations en matières plastiques pour les applications industrielles - Polybutène (PB), polyéthylène (PE), polyéthylène de meilleure résistance à la température (PE-RT), polyéthylène réticulé (PEX), polypropylène (PP) - Séries métriques pour les spécifications pour les composants
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €167.00

  • NF EN ISO 6802, E48-087 (10/2018)

    Rubber and plastics hoses and hose assemblies - Hydraulic impulse test with flexing
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €46.55

  • BS EN ISO 11296-3:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with close-fit pipes
    9/27/2018 - PDF - English - BSI
    Learn More
    €250.00

  • ASME B16.22-2018

    Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings
    9/25/2018 - Papier - English - ASME
    Learn More
    €110.00

  • NBN EN ISO 11296-3:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
    9/19/2018 - PDF - French - NBN
    Learn More
    €89.00

  • NBN EN ISO 11296-3:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
    9/19/2018 - PDF - German - NBN
    Learn More
    €89.00

  • NBN EN ISO 11296-3:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
    9/19/2018 - PDF - English - NBN
    Learn More
    €89.00

  • UNE-EN ISO 11297-2:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
    9/19/2018 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-EN ISO 11297-2:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
    9/19/2018 - PDF - English - AENOR
    Learn More
    €81.60

  • UNE-EN ISO 11297-4:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
    9/19/2018 - PDF - Spanish - AENOR
    Learn More
    €68.00

  • UNE-EN ISO 11297-4:2018

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018)
    9/19/2018 - PDF - English - AENOR
    Learn More
    €81.60

  • BS EN 560:2018

    Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes
    9/19/2018 - PDF - English - BSI
    Learn More
    €180.00

  • ISO 6802:2018 (R2023)

    Rubber or plastics hoses and hose assemblies
    Hydraulic impulse test with flexing
    9/12/2018 - Paper - French - ISO
    Learn More
    €72.00

  • ISO 6802:2018 (R2023)

    Rubber or plastics hoses and hose assemblies
    Hydraulic impulse test with flexing
    9/12/2018 - Paper - English - ISO
    Learn More
    €72.00

  • BS ISO 10508:2006+A1:2018

    Plastics piping systems for hot and cold water installations. Guidance for classification and design
    9/6/2018 - PDF - English - BSI
    Learn More
    €180.00

  • UNE-EN ISO 11296-1:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
    9/5/2018 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE-EN ISO 11296-1:2018

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018)
    9/5/2018 - PDF - English - AENOR
    Learn More
    €82.80

  • NF EN ISO 13056, T54-941 (09/2018)

    Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €33.62

  • MSS SP-25-2018

    Standard Marking System for Valves, Fittings, Flanges, and Unions
    9/1/2018 - PDF sécurisé - English - MSS
    Learn More
    €195.00

  • NF EN ISO 19893, T54-940 (09/2018)

    Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €58.50

  • DIN EN ISO 11297-2:2018-09

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018), German version EN ISO 11297-2:2018
    9/1/2018 - PDF - German - DIN
    Learn More
    €72.80

  • DIN EN ISO 11296-2:2018-09

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
    9/1/2018 - PDF - English - DIN
    Learn More
    €91.12

  • DIN EN ISO 11297-2:2018-09

    Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
    9/1/2018 - PDF - English - DIN
    Learn More
    €91.12

Items 3001 to 3200 of 8221 total

Set Ascending Direction
per page

List  Grid