23.040 : Pipeline components and pipelines
-
BS EN 12200-1:2016 + Redline
Tracked Changes. Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications pipes, fittings and the system
2/25/2020 - PDF - English - BSI
Learn More€382.00 -
BS EN 13348:2016 + Redline
Tracked Changes. Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum
2/25/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 12735-2:2016 + Redline
Tracked Changes. Copper and copper alloys. Seamless, round tubes for air conditioning refrigeration Tubes equipment
2/25/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 13476-1:2018 + Redline
Tracked Changes. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) General requirements performance characteristics
2/25/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 8033:2017 + Redline
Tracked Changes. Rubber and plastics hoses. Determination of adhesion between components
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 7751:2016 + Redline
Tracked Changes. Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure
2/25/2020 - PDF - English - BSI
Learn More€197.00 -
BS EN ISO 7326:2016 + Redline
Tracked Changes. Rubber and plastics hoses. Assessment of ozone resistance under static conditions
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 8331:2016 + Redline
Tracked Changes. Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance
2/25/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 13765:2018 + Redline
Tracked Changes. Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
2/25/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 2398:2016 + Redline
Tracked Changes. Rubber hoses, textile-reinforced, for compressed air. Specification
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 853:2015 + Redline
Tracked Changes. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 13618:2016 + Redline
Tracked Changes. Flexible hose assemblies in drinking water installations. Functional requirements and test methods
2/25/2020 - PDF - English - BSI
Learn More€382.00 -
BS EN ISO 6803:2017 + Redline
Tracked Changes. Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 560:2018 + Redline
Tracked Changes. Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes
2/25/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 1765:2016 + Redline
Tracked Changes. Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
2/25/2020 - PDF - English - BSI
Learn More€382.00 -
BS EN 13160-2:2016 + Redline
Tracked Changes. Leak detection systems Requirements and test/assessment methods for pressure vacuum
2/25/2020 - PDF - English - BSI
Learn More€454.00 -
BS EN 13160-1:2016 + Redline
Tracked Changes. Leak detection systems General Principles
2/25/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 13160-5:2016 + Redline
Tracked Changes. Leak detection systems Requirements and test/assessment methods for in-tank gauge pressurised pipework
2/25/2020 - PDF - English - BSI
Learn More€492.00 -
BS EN 13160-7:2016 + Redline
Tracked Changes. Leak detection systems Requirements and test/assessment methods for interstitial spaces, leak linings jackets
2/25/2020 - PDF - English - BSI
Learn More€454.00 -
BS EN 13160-4:2016 + Redline
Tracked Changes. Leak detection systems Requirements and test/assessment methods for sensor based leak
2/25/2020 - PDF - English - BSI
Learn More€382.00 -
PD CEN ISO/TS 15876-7:2018 + Redline
Tracked Changes. Plastics piping systems for hot and cold water installations. Polybutylene (PB) Guidance the assessment of conformity
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
PD CEN ISO/TS 15874-7:2018 + Redline
Tracked Changes. Plastics piping systems for hot and cold water installations. Polypropylene (PP) Guidance the assessment of conformity
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
PD CEN ISO/TS 15877-7:2018 + Redline
Tracked Changes. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Guidance the assessment of conformity
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 1295-1:2019 + Redline
Tracked Changes. Structural design of buried pipelines under various conditions loading General requirements
2/24/2020 - PDF - English - BSI
Learn More€382.00 -
PD CEN ISO/TS 22391-7:2018 + Redline
Tracked Changes. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance the assessment conformity
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 10893-7:2019 + Redline
Tracked Changes. Non-destructive testing of steel tubes Digital radiographic the weld seam welded for detection imperfections
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 10893-6:2019 + Redline
Tracked Changes. Non-destructive testing of steel tubes Radiographic the weld seam welded for detection imperfections
2/24/2020 - PDF - English - BSI
Learn More€235.00 -
PD CEN ISO/TS 15875-7:2018 + Redline
Tracked Changes. Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Guidance the assessment of conformity
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 9969:2016 + Redline
Tracked Changes. Thermoplastics pipes. Determination of ring stiffness
2/24/2020 - PDF - English - BSI
Learn More€235.00 -
PD CEN ISO/TS 21003-7:2019 + Redline
Tracked Changes. Multilayer piping systems for hot and cold water installations inside buildings Guidance the assessment of conformity
2/24/2020 - PDF - English - BSI
Learn More€382.00 -
BS ISO 4427-1:2019 + Redline
Tracked Changes. Plastics piping systems for water supply and drainage sewerage under pressure. Polyethylene (PE) General
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 11296-7:2019 + Redline
Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
BS ISO 4427-3:2019 + Redline
Tracked Changes. Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Fittings
2/24/2020 - PDF - English - BSI
Learn More€382.00 -
BS ISO 11413:2019 + Redline
Tracked Changes. Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
2/24/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 1762:2018 + Redline
Tracked Changes. Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
2/24/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN 12954:2019 + Redline
Tracked Changes. General principles of cathodic protection of buried or immersed onshore metallic structures
2/24/2020 - PDF - English - BSI
Learn More€382.00 -
CEN/TS 1401-2:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
2/22/2020 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 1401-2:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
2/22/2020 - PDF - English - NBN
Learn More€121.00 -
€449.00
-
BS EN 17151:2019
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Test method for determination of long-term compression strength of boxes
2/17/2020 - PDF - English - BSI
Learn More€180.00 -
ASTM F949-20
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
2/15/2020 - PDF - English - ASTM
Learn More€57.00 -
ASTM F949-20 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
2/15/2020 - PDF - English - ASTM
Learn More€68.00 -
€85.00
-
UNE-EN 12201-2:2012+A1:2020
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
2/12/2020 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 12201-2:2012+A1:2020
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
2/12/2020 - PDF - English - AENOR
Learn More€88.80 -
€93.00
-
ASTM F3430-20
Standard Specification for Closed-Cell Cellular Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
2/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM F3430-20 + Redline
Standard Specification for Closed-Cell Cellular Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
2/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM F3390-20
Standard Specification for 3 through 24 in. Lined Flexible Corrugated Polyethylene Pipe for Land Drainage Applications
2/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM F3390-20 + Redline
Standard Specification for 3 through 24 in. Lined Flexible Corrugated Polyethylene Pipe for Land Drainage Applications
2/1/2020 - PDF - English - ASTM
Learn More€61.00 -
DIN EN 14901-2:2020-02
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO), German version EN 14901-2:2019
2/1/2020 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 3183:2020-02
Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2019), German version EN ISO 3183:2019
2/1/2020 - PDF - German - DIN
Learn More€99.35 -
DIN EN 1971-2:2020-02
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface, German version EN 1971-2:2019
2/1/2020 - PDF - German - DIN
Learn More€52.90 -
DIN EN 1971-1:2020-02
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface, German version EN 1971-1:2019
2/1/2020 - PDF - German - DIN
Learn More€52.90 -
ASTM F449-20
Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
2/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM F449-20 + Redline
Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
2/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM F1948-20
Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
2/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM F1948-20 + Redline
Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
2/1/2020 - PDF - English - ASTM
Learn More€61.00 -
DIN EN 12954:2020-02
General principles of cathodic protection of buried or immersed onshore metallic structures, German version EN 12954:2019
2/1/2020 - PDF - German - DIN
Learn More€115.33 -
NBN EN 10216-2:2013+A1:2020
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
1/29/2020 - PDF - French - NBN
Learn More€184.00 -
NBN EN 10216-2:2013+A1:2020
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
1/29/2020 - PDF - German - NBN
Learn More€184.00 -
NBN EN 10216-2:2013+A1:2020
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
1/29/2020 - PDF - English - NBN
Learn More€184.00 -
€180.00
-
BS EN 17248:2019
District heating and district cooling pipe systems. Terms and definitions
1/20/2020 - PDF - English - BSI
Learn More€250.00 -
BS EN 13480-6:2017+A1:2019
Metallic industrial piping Additional requirements for buried
1/17/2020 - PDF - English - BSI
Learn More€293.00 -
BS EN 13480-8:2017+A1:2019
Metallic industrial piping Additional requirements for aluminium and alloy
1/17/2020 - PDF - English - BSI
Learn More€331.00 -
€180.00
-
SAE J 532:2020-01-15
Automotive Straight Thread Filter and Drain Plugs (Stabilized: Jan 2020)
1/15/2020 - PDF - English - SAE
Learn More€93.00 -
BS EN 10216-2:2013+A1:2019
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy with specified elevated temperature properties
1/14/2020 - PDF - English - BSI
Learn More€348.00 -
UNE-EN ISO 13257:2020
Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
1/8/2020 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 13257:2020
Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
1/8/2020 - PDF - English - AENOR
Learn More€81.60 -
€70.00
-
€84.00
-
ASTM Standards for Process Piping - Multi-User - Single-Site Online
For the first time, ASTM International has compiled this valuable companion resource to the 2015 ASME B31.3 Process Piping Code.
You'll have instant access to the 200+ ASTM standards that are listed in ASME B31.3-2014 Appendix E, and much more.
This 1-year Online subscription includes redline, historical, and withdrawn standards.
Published: Updated weekly
1/1/2020 - Internet - English - ASTM
Learn More€640.00 -
€556.00
-
€342.00
-
DIN EN 14901-1:2020-01
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty), German version EN 14901-1:2014+A1:2019
1/1/2020 - PDF - German - DIN
Learn More€79.72 -
NEN 3650-1:2020
Requirements for pipeline systems - Part 1: General requirements
1/1/2020 - PDF - Dutch - NEN
Learn More€142.50 -
NEN 3650-2:2020
Requirements for pipeline systems - Part 2: Additional specifications for steel pipelines
1/1/2020 - PDF - Dutch - NEN
Learn More€118.75 -
DIN ISO 16611:2020-01
Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions, requirements and tests (ISO 16611:2017)
1/1/2020 - PDF - German - DIN
Learn More€92.62 -
ASME B16.1-2020
Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250
1/1/2020 - PDF DRM - English - ASME
Learn More€113.00 -
€104.00
-
NF E29-204 (01/2020)
Industrial pipeworks - Forged steel flanges and collars - Materials - Mechanical properties - Fabrication - Tests
1/1/2020 - Paper - French - AFNOR
Learn More€75.67 -
NF E29-220 (01/2020)
Industrial pipework - Flanged adapters and disassembly seals for pressure equipment - Specifications
1/1/2020 - Paper - French - AFNOR
Learn More€75.67 -
€61.00
-
ASME B16.47-2020
Large Diameter Steel Flanges: NPS 26 through NPS 60, Metric/Inch Standard
1/1/2020 - PDF DRM - English - ASME
Learn More€143.00 -
ASME B16.5-2020
Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24, Metric/Inch Standard
1/1/2020 - PDF DRM - English - ASME
Learn More€276.00 -
€273.00
-
NF ISO 3601-1/A1, T47-501/A1 (01/2020)
Fluid power systems - O-rings - Part 1 : inside diameters, cross-sections, tolerances and designation codes - Amendment 1 - Transmissions hydrauliques et pneumatiques - Joints toriques - Partie 1 : diamètres intérieurs, sections, tolérances et code d'identification dimensionnelle - Amendement 1
1/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
DIN 30654:2020-01
Sealing profiles of expanded PTFE for flanged joints in the gas supply.
1/1/2020 - PDF - German - DIN
Learn More€45.98 -
UNE-EN 17176-1:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
12/26/2019 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 17176-1:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
12/26/2019 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 17176-5:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
12/26/2019 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 17176-5:2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
12/26/2019 - PDF - English - AENOR
Learn More€72.00 -
€276.00
-
€135.00
-
NBN EN 14901-1:2014+A1:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
12/19/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN 14901-1:2014+A1:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
12/19/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN 14901-1:2014+A1:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
12/19/2019 - PDF - English - NBN
Learn More€89.00 -
NBN EN 14901-2:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
12/19/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN 14901-2:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
12/19/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN 14901-2:2019
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
12/19/2019 - PDF - English - NBN
Learn More€89.00 -
NBN EN 1971-2:2019
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
12/19/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN 1971-2:2019
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
12/19/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN 1971-2:2019
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
12/19/2019 - PDF - English - NBN
Learn More€58.00 -
NBN EN 1971-1:2019
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
12/19/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN 1971-1:2019
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
12/19/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN 1971-1:2019
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
12/19/2019 - PDF - English - NBN
Learn More€58.00 -
PD CEN/TS 1852-2:2019
Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance the assessment of conformity
12/13/2019 - PDF - English - BSI
Learn More€250.00 -
PD CEN/TS 1451-2:2019
Plastic piping systems for soil and waste discharge (low high temperature) within the building structure. Polypropylene (PP) Guidance assessment of conformity
12/13/2019 - PDF - English - BSI
Learn More€250.00 -
PD CEN/TS 13476-4:2019
Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Assessment conformity
12/13/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN 14901-2:2019
Ductile iron pipes, fittings and accessories. Requirements test methods for organic coatings of ductile accessories Thermoplastic acid modified polyolefin coating (TMPO)
12/10/2019 - PDF - English - BSI
Learn More€180.00 -
CEN/TS 1852-2:2019
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
12/7/2019 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 1852-2:2019
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
12/7/2019 - PDF - English - NBN
Learn More€121.00 -
CEN/TS 1451-2:2019
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
12/7/2019 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 1451-2:2019
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
12/7/2019 - PDF - English - NBN
Learn More€121.00 -
CEN/TS 13476-4:2019
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Assessment of conformity
12/7/2019 - PDF - German - NBN
Learn More€142.00 -
CEN/TS 13476-4:2019
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Assessment of conformity
12/7/2019 - PDF - English - NBN
Learn More€142.00 -
UNE-EN 10217-1:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
12/4/2019 - PDF - Spanish - AENOR
Learn More€97.00 -
UNE-EN 10217-1:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
12/4/2019 - PDF - English - AENOR
Learn More€116.40 -
UNE-EN 10217-2:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
12/4/2019 - PDF - Spanish - AENOR
Learn More€83.00 -
UNE-EN 10217-2:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
12/4/2019 - PDF - English - AENOR
Learn More€99.60 -
UNE-EN 10217-3:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
12/4/2019 - PDF - Spanish - AENOR
Learn More€103.00 -
UNE-EN 10217-3:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
12/4/2019 - PDF - English - AENOR
Learn More€123.60 -
UNE-EN 10217-4:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
12/4/2019 - PDF - Spanish - AENOR
Learn More€80.00 -
UNE-EN 10217-4:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
12/4/2019 - PDF - English - AENOR
Learn More€96.00 -
UNE-EN 10217-5:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
12/4/2019 - PDF - Spanish - AENOR
Learn More€90.00 -
UNE-EN 10217-5:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
12/4/2019 - PDF - English - AENOR
Learn More€108.00 -
UNE-EN 10217-6:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
12/4/2019 - PDF - Spanish - AENOR
Learn More€87.00 -
UNE-EN 10217-6:2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
12/4/2019 - PDF - English - AENOR
Learn More€104.40 -
BS EN 1451-1:2017
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Polypropylene (PP) Specifications pipes, fittings system
12/3/2019 - PDF - English - BSI
Learn More€348.00 -
BS EN 1971-1:2019
Copper and copper alloys. Eddy current test for measuring defects on seamless round alloy tubes Test with an encircling coil the outer surface
12/3/2019 - PDF - English - BSI
Learn More€151.00 -
BS EN 1971-2:2019
Copper and copper alloys. Eddy current test for measuring defects on seamless round alloy tubes Test with an internal probe the inner surface
12/3/2019 - PDF - English - BSI
Learn More€151.00 -
DIN EN 16125:2019-12
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase, German version EN 16125:2019
12/1/2019 - PDF - German - DIN
Learn More€115.33 -
DIN EN 17248:2019-12
District heating and district cooling pipe systems - Terms and definitions, German version EN 17248:2019
12/1/2019 - PDF - German - DIN
Learn More€79.72 -
NF EN 10216-2/IN1, A49-200-2/IN1 (12/2019)
Seamless steel tubes for pressure purposes - Technical conditions - Part 2 : non-alloy and alloy steel tubes with specified elevated temperature properties
12/1/2019 - Paper - French - AFNOR
Learn More€23.00 -
NF EN 10216-2+A1, A49-200-2 (12/2019)
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2 : non-alloy and alloy steel tubes with specified elevated temperature properties
12/1/2019 - Paper - French - AFNOR
Learn More€108.33 -
PR NF EN 16436-1+A2/A3, D36-387-1+A2/A3PR (12/2019)
Tuyaux,tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane, le butane et leurs mélanges en phase vapeur - Partie 1: Tuyaux et tubes
12/1/2019 - Paper - English, French - AFNOR
Learn More€35.50 -
€48.00
-
ASTM A858/A858M-19
Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
12/1/2019 - PDF - English - ASTM
Learn More€46.00 -
ASTM A858/A858M-19 + Redline
Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
12/1/2019 - PDF - English - ASTM
Learn More€53.00 -
ASTM F1076-19
Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
12/1/2019 - PDF - English - ASTM
Learn More€51.00 -
ASTM F1076-19 + Redline
Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
12/1/2019 - PDF - English - ASTM
Learn More€61.00 -
DIN EN ISO 1403:2019-12
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2019), German version EN ISO 1403:2019
12/1/2019 - PDF - German - DIN
Learn More€59.63 -
DIN 4065:2019-12
Gas pipelines in the transport system - Indicating labels.
12/1/2019 - PDF - German - DIN
Learn More€32.34 -
NBN EN 489-1:2019
District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Part 1: Joint casing assemblies and thermal insulation for hot water networks in accordance with EN 13941-1
11/28/2019 - PDF - French - NBN
Learn More€121.00 -
NBN EN 489-1:2019
District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Part 1: Joint casing assemblies and thermal insulation for hot water networks in accordance with EN 13941-1
11/28/2019 - PDF - German - NBN
Learn More€121.00 -
NBN EN 489-1:2019
District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Part 1: Joint casing assemblies and thermal insulation for hot water networks in accordance with EN 13941-1
11/28/2019 - PDF - English - NBN
Learn More€121.00 -
NBN EN 15698-1:2019
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
11/28/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN 15698-1:2019
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
11/28/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN 15698-1:2019
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
11/28/2019 - PDF - English - NBN
Learn More€89.00 -
NBN EN 14419:2019
District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems
11/28/2019 - PDF - French - NBN
Learn More€142.00 -
NBN EN 14419:2019
District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems
11/28/2019 - PDF - German - NBN
Learn More€142.00 -
NBN EN 14419:2019
District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems
11/28/2019 - PDF - English - NBN
Learn More€142.00 -
NBN EN 17248:2019
District heating and district cooling pipe systems - Terms and definitions
11/28/2019 - PDF - French - NBN
Learn More€121.00 -
NBN EN 17248:2019
District heating and district cooling pipe systems - Terms and definitions
11/28/2019 - PDF - German - NBN
Learn More€121.00 -
NBN EN 17248:2019
District heating and district cooling pipe systems - Terms and definitions
11/28/2019 - PDF - English - NBN
Learn More€121.00 -
NBN EN 15698-2:2019
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
11/28/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN 15698-2:2019
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
11/28/2019 - PDF - English - NBN
Learn More€89.00 -
NBN EN 448:2019
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
11/28/2019 - PDF - French - NBN
Learn More€142.00 -
NBN EN 448:2019
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
11/28/2019 - PDF - German - NBN
Learn More€142.00 -
NBN EN 448:2019
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
11/28/2019 - PDF - English - NBN
Learn More€142.00 -
NBN EN ISO 10893-3:2011/A1:2019
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
11/28/2019 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 10893-3:2011/A1:2019
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
11/28/2019 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 10893-3:2011/A1:2019
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
11/28/2019 - PDF - English - NBN
Learn More€20.00 -
NBN EN 12449:2016+A1:2019
Copper and copper alloys - Seamless, round tubes for general purposes
11/28/2019 - PDF - French - NBN
Learn More€163.00 -
NBN EN 12449:2016+A1:2019
Copper and copper alloys - Seamless, round tubes for general purposes
11/28/2019 - PDF - German - NBN
Learn More€163.00 -
NBN EN 12449:2016+A1:2019
Copper and copper alloys - Seamless, round tubes for general purposes
11/28/2019 - PDF - English - NBN
Learn More€163.00 -
BS EN 14901-1:2014+A1:2019
Ductile iron pipes, fittings and accessories. Requirements test methods for organic coatings of ductile accessories Epoxy coating (heavy duty)
11/27/2019 - PDF - English - BSI
Learn More€180.00 -
UNE-EN 16436-2:2019
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 2: Assemblies
11/27/2019 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 16436-2:2019
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 2: Assemblies
11/27/2019 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 10893-6:2019
Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
11/20/2019 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 10893-6:2019
Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
11/20/2019 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 10893-7:2019
Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
11/20/2019 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 10893-7:2019
Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
11/20/2019 - PDF - English - AENOR
Learn More€88.80 -
SAE AS 5964B:2019-11-08
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, 45° ELBOW TO 45° ELBOW (Stabilized: Nov 2019)
11/8/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AS 5965B:2019-11-08
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, 45° ELBOW TO 90° ELBOW (Stabilized: Nov 2019)
11/8/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AS 5966B:2019-11-08
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, 90° ELBOW TO 90° ELBOW (Stabilized: Nov 2019)
11/8/2019 - PDF - English - SAE
Learn More€66.00 -
BS EN ISO 3183:2019
Petroleum and natural gas industries. Steel pipe for pipeline transportation systems
11/6/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN 15698-1:2019
District heating pipes. Bonded twin pipe systems for directly buried hot water networks Factory made assembly of steel service pipes, polyurethane thermal insulation and one casing polyethylene
11/5/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 15698-2:2019
District heating pipes. Bonded twin pipe systems for directly buried hot water networks Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation one casing polyethylene
11/5/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN 489-1:2019
District heating pipes. Bonded single and twin pipe systems for buried hot water networks Joint casing assemblies thermal insulation in accordance with EN 13941-1
11/5/2019 - PDF - English - BSI
Learn More€250.00 -
ASME B31.4-2019
Pipeline Transportation Systems for Liquids and Slurries
11/1/2019 - Papier - English - ASME
Learn More€314.00 -
DIN EN 17150:2019-11
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of short-term compression strength of boxes, German version EN 17150:2019
11/1/2019 - PDF - German - DIN
Learn More€59.63 -
DIN EN 17151:2019-11
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes, German version EN 17151:2019
11/1/2019 - PDF - German - DIN
Learn More€72.80 -
UNE-CEN ISO/TS 21003-7:2019
Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity (ISO/TS 21003-7:2019) (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€78.00 -
UNE-EN 448:2019
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 489-1:2019
District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Part 1: Joint casing assemblies and thermal insulation for hot water networks in accordance with EN 13941-1 (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 14419:2019
District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 15698-1:2019
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€62.00 -
UNE-EN 15698-2:2019
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€59.00 -
UNE-EN 17248:2019
District heating and district cooling pipe systems - Terms and definitions (Endorsed by Asociación Española de Normalización in November of 2019.)
11/1/2019 - PDF - English - AENOR
Learn More€68.00 -
NF EN 14901-2, A48-001-2 (11/2019)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2 : thermoplastic acid modified polyolefin coating (TMPO) - Tuyaux, raccords et accessoires en fonte ductile - Prescriptions et méthodes d'essai relatives aux revêtements organiques des raccords et accessoires en fonte ductile - Partie 2 : revêtement thermoplastique en polyoléfine modifiée par un acide
11/1/2019 - Paper - French - AFNOR
Learn More€75.50 -
NF EN 14901-1+A1, A48-001-1 (11/2019)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1 : epoxy coating (heavy duty)
11/1/2019 - Paper - French - AFNOR
Learn More€75.67 -
NF EN 14901-1/IN1, A48-001-1/IN1 (11/2019)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1 : epoxy coating (heavy duty)
11/1/2019 - Paper - French - AFNOR
Learn More€23.00 -
ASTM A358/A358M-19
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
11/1/2019 - PDF - English - ASTM
Learn More€51.00 -
ASTM A358/A358M-19 + Redline
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
11/1/2019 - PDF - English - ASTM
Learn More€61.00 -
ASTM A691/A691M-19
Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
11/1/2019 - PDF - English - ASTM
Learn More€51.00 -
ASTM A691/A691M-19 + Redline
Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
11/1/2019 - PDF - English - ASTM
Learn More€61.00 -
ASTM A672/A672M-19
Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
11/1/2019 - PDF - English - ASTM
Learn More€51.00