23.040 : Pipeline components and pipelines
-
20/30368220 DC:2020
BS ISO 22101-2. Polyethylene reinforced with short glass fibres (PE-sGF) piping systems for industrial applications Part 2. Pipes
7/22/2020 - PDF - English - BSI
Learn More€24.00 -
20/30368217 DC:2020
BS ISO 22101-1. Polyethylene reinforced with short glass fibres (PE-sGF) piping systems for industrial applications Part 1. General
7/22/2020 - PDF - English - BSI
Learn More€24.00 -
PD CEN/TS 1519-2:2020
Plastic piping systems for soil and waste discharge (low high temperature) within the building structure. Polyethylene (PE) Guidance assessment of conformity
7/21/2020 - PDF - English - BSI
Learn More€250.00 -
PD CEN/TS 17176-7:2020
Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Assessment of conformity
7/20/2020 - PDF - English - BSI
Learn More€250.00 -
20/30420214 DC:2020
BS EN 1455-1. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Part 1. Requirements pipes, fittings system
7/20/2020 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 10893-11:2011+A1:2020
Non-destructive testing of steel tubes Automated ultrasonic the weld seam welded for detection longitudinal and/or transverse imperfections
7/17/2020 - PDF - English - BSI
Learn More€180.00 -
UNE-EN 17150:2020
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of short-term compression strength of boxes
7/15/2020 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 17150:2020
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of short-term compression strength of boxes
7/15/2020 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 17151:2020
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes
7/15/2020 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 17151:2020
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes
7/15/2020 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 17152-1:2020
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U
7/15/2020 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 17152-1:2020
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U
7/15/2020 - PDF - English - AENOR
Learn More€81.60 -
BS EN ISO 10893-10:2011+A1:2020
Non-destructive testing of steel tubes Automated full peripheral ultrasonic seamless and welded (except submerged arc-welded) for the detection longitudinal and/or transverse imperfections
7/15/2020 - PDF - English - BSI
Learn More€180.00 -
CEN/TS 17176-7:2020
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity
7/10/2020 - PDF - German - NBN
Learn More€142.00 -
CEN/TS 17176-7:2020
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity
7/10/2020 - PDF - English - NBN
Learn More€142.00 -
CEN/TS 1519-2:2020
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Polyethylen (PE) - Teil 2: Empfehlungen für die Beurteilung der Konformität
7/10/2020 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 1519-2:2020
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity
7/10/2020 - PDF - English - NBN
Learn More€121.00 -
BS EN 13598-1:2020
Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Specifications ancillary fittings shallow chambers
7/10/2020 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 10893-12:2011+A1:2020
Non-destructive testing of steel tubes Automated full peripheral ultrasonic thickness seamless and welded (except submerged arc-welded)
7/9/2020 - PDF - English - BSI
Learn More€151.00 -
BS ISO 8180:2020
Ductile iron pipelines. Polyethylene sleeving for site application
7/7/2020 - PDF - English - BSI
Learn More€180.00 -
VDI 3805 Blatt 29:2020-07
Product data exchange in the building services - Pipes, ducts, and fittings
7/1/2020 - PDF - English, German - VDI
Learn More€121.61 -
NF EN ISO 10893-11/A1, A49-785-11/A1 (07/2020)
Non-destructive testing of steel tubes - Part 11 : automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency, change of acceptance criteria - Essais non destructifs des tubes en acier - Partie 11 : Contrôle automatisé par ultrasons du cordon de soudure des tubes en acier soudés pour la détection des imperfections longitudinales et/ou transversales - Amendement 1 : Modification de la fréquence ultrasonore d'essai des transducteurs -
7/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN 14628-1, A48-883-1 (07/2020)
Ductile iron pipes, fittings and accessories - Requirements and test methods - Part 1 : PE coatings
7/1/2020 - Paper - French - AFNOR
Learn More€86.67 -
NF EN ISO 10893-9/A1, A49-785-9/A1 (07/2020)
Non-destructive testing of steel tubes - Part 9 : Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1 : change acceptance criteria - Essais non destructifs des tubes en acier - Partie 9 : Contrôle automatisé par ultrasons pour la détection des dédoublures dans les bandes/tôles utilisées pour la fabrication des tubes en acier soudés - Amendement 1 : Changement des critères d'acceptation
7/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-10/A1, A49-785-10/A1 (07/2020)
Non-destructive testing of steel tubes - Part 10 : automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency - change of acceptance criteria - Essais non destructifs des tubes en acier - Partie 10 : Contrôle automatisé par ultrasons sur toute la circonférence des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales - AMENDEMENT 1 :
7/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
ASTM A513/A513M-20a
Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
7/1/2020 - PDF - English - ASTM
Learn More€74.00 -
ASTM A513/A513M-20a + Redline
Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
7/1/2020 - PDF - English - ASTM
Learn More€87.00 -
UNE-EN 14901-2:2020
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
7/1/2020 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 14901-2:2020
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
7/1/2020 - PDF - English - AENOR
Learn More€81.60 -
DIN 11865:2020-07
Stainless steel components for aseptic applications in the chemical and the pharmaceutical industries - Tees, elbows and reducers
7/1/2020 - PDF - German - DIN
Learn More€104.95 -
NF EN ISO 8031, T47-135 (07/2020)
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
7/1/2020 - Paper - French - AFNOR
Learn More€75.67 -
DIN EN 13766:2020-07
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification, German version EN 13766:2018+A1:2020
7/1/2020 - PDF - German - DIN
Learn More€92.62 -
NF EN ISO 13259, T54-906 (07/2020)
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints
7/1/2020 - Paper - French - AFNOR
Learn More€60.67 -
DIN 3535-5:2020-07
Seals for gas supply — Part 5: Sealing materials of rubber, cork and synthetic fibres for gas fittings and gas appliances.
7/1/2020 - PDF - German - DIN
Learn More€52.90 -
NF EN 17415-1, E39-020-1 (07/2020)
District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 1 : factory made pipe assembly of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene - Réseaux d'eau glacée - Systèmes bloqués de tuyaux préisolés pour les réseaux d'eau glacée enterrés directement - Partie 1 : Tube de service en acier ou en matière plastique, isolation thermique en polyuréthane et protection en polyéthylène
7/1/2020 - Paper - French - AFNOR
Learn More€108.33 -
NF EN 17414-1, E39-019-1 (07/2020)
District cooling pipes - Factory made flexible pipe systems - Part 1 : classification, general requirements and test methods - Réseaux d'eau glacée - Systèmes de tuyaux flexibles manufacturés - Partie 1 : Classification, exigences générales et méthodes d'essai
7/1/2020 - Paper - French - AFNOR
Learn More€99.33 -
NF EN 17414-2, E39-019-2 (07/2020)
District cooling pipes - Factory made flexible pipe systems - Part 2 : bonded system with plastic service pipes, requirements and test methods - Réseaux d'eau glacée - Systèmes de tuyaux flexibles manufacturés - Partie 2 : Système bloqué avec tube de service en plastique - Prescriptions et méthodes d'essaiRéseaux d'eau glacée - Systèmes de tuyaux flexibles manufacturés - Partie 2 : Système bloqué avec tube de service en plastique -
7/1/2020 - Paper - French - AFNOR
Learn More€75.67 -
NF EN 17414-3, E39-019-3 (07/2020)
District cooling pipes - Factory made flexible pipe systems - Part 3 : non bonded system with plastic service pipes - Requirements and test methods
7/1/2020 - Paper - French - AFNOR
Learn More€60.67 -
ASTM E3037-20
Standard Test Method for Measuring Relative Movement Capabilities of Through-Penetration Firestop Systems
7/1/2020 - PDF - English - ASTM
Learn More€57.00 -
ASTM E3037-20 + Redline
Standard Test Method for Measuring Relative Movement Capabilities of Through-Penetration Firestop Systems
7/1/2020 - PDF - English - ASTM
Learn More€68.00 -
NBN EN 13476-3:2018+A1:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
6/25/2020 - PDF - French - NBN
Learn More€184.00 -
NBN EN 13476-3:2018+A1:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
6/25/2020 - PDF - German - NBN
Learn More€184.00 -
NBN EN 13476-3:2018+A1:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
6/25/2020 - PDF - English - NBN
Learn More€184.00 -
NBN EN 13476-2:2018+A1:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
6/25/2020 - PDF - French - NBN
Learn More€184.00 -
NBN EN 13476-2:2018+A1:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
6/25/2020 - PDF - German - NBN
Learn More€184.00 -
NBN EN 13476-2:2018+A1:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
6/25/2020 - PDF - English - NBN
Learn More€184.00 -
NBN EN ISO 10893-2:2011/A1:2020
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
6/25/2020 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 10893-8:2011/A1:2020
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
6/25/2020 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 10893-8:2011/A1:2020
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
6/25/2020 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 10893-3:2011/A2:2020
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
6/25/2020 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 10893-3:2011/A2:2020
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
6/25/2020 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 10893-2:2011/A1:2020
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
6/25/2020 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 10893-8:2011/A1:2020
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
6/25/2020 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 10893-3:2011/A2:2020
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
6/25/2020 - PDF - English - NBN
Learn More€20.00 -
NBN EN 16436-1:2014+A3:2020
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings
6/25/2020 - PDF - French - NBN
Learn More€121.00 -
NBN EN 16436-1:2014+A3:2020
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings
6/25/2020 - PDF - German - NBN
Learn More€121.00 -
NBN EN 16436-1:2014+A3:2020
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings
6/25/2020 - PDF - English - NBN
Learn More€121.00 -
BS EN 17152-1:2019
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Boxes used infiltration, attenuation Specifications storm water boxes made PP PVC-U
6/19/2020 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 10893-1:2011+A1:2020
Non-destructive testing of steel tubes Automated electromagnetic seamless and welded (except submerged arc-welded) for the verification hydraulic leaktightness
6/16/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN 13476-2:2018+A1:2020
Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Specifications pipes fittings with smooth internal external surface the system, Type A
6/16/2020 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 10893-2:2011+A1:2020
Non-destructive testing of steel tubes Automated eddy current seamless and welded (except submerged arc-welded) for the detection imperfections
6/12/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 10893-3:2011+A2:2020
Non-destructive testing of steel tubes Automated full peripheral flux leakage seamless and welded (except submerged arc-welded) ferromagnetic for the detection longitudinal and/or transverse imperfections
6/12/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 10893-8:2011+A1:2020
Non-destructive testing of steel tubes Automated ultrasonic seamless and welded for the detection laminar imperfections
6/12/2020 - PDF - English - BSI
Learn More€180.00 -
20/30359760 DC:2020
BS ISO 20444. Rubber and plastics hoses. Determination of abrasion resistance of the outer cover. Abrasion tests where the hose is rotated against a reciprocating abrasion tool
6/11/2020 - PDF - English - BSI
Learn More€24.00 -
UNE-EN 16125:2020
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
6/10/2020 - PDF - Spanish - AENOR
Learn More€87.00 -
UNE-EN 16125:2020
LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
6/10/2020 - PDF - English - AENOR
Learn More€104.40 -
UNE-EN ISO 1403:2020
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2019)
6/10/2020 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 1403:2020
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2019)
6/10/2020 - PDF - English - AENOR
Learn More€63.60 -
SAE J 2435:2020-06-05
Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, Cold Forming, Welding, and Brazing
6/5/2020 - PDF - English - SAE
Learn More€79.00 -
NF EN 13476-2/IN1, P16-353-2/IN1 (06/2020)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2 : specifications for pipes and fittings with smooth internal and external surface and the system, Type A - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 2 : Spécifications pour les
6/1/2020 - Paper - French - AFNOR
Learn More€23.00 -
DIN EN 13480-2/A7:2020-06
Metallic industrial piping - Part 2: Materials, German version EN 13480-2:2017/A7:2020
6/1/2020 - PDF - German - DIN
Learn More€32.34 -
DIN EN 13480-4/A2:2020-06
Metallic industrial piping - Part 4: Fabrication and installation, German and English version EN 13480-4:2017/prA2:2020
6/1/2020 - PDF - English, German - DIN
Learn More€39.35 -
UNE-EN 13480-2:2017/A7:2020
Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in June of 2020.)
6/1/2020 - PDF - English - AENOR
Learn More€16.00 -
NF EN ISO 10893-12/A1, A49-785-12/A1 (06/2020)
Non-destructive testing of steel tubes - Part 12 : automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1 : change of acceptance criteria
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-1/A1, A49-785-1/A1 (06/2020)
Non-destructive testing of steel tubes - Part 1 : automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1 : change of dimensions of the reference notch , change acceptance criteria - Essais non destructifs des tubes en acier - Partie 1 : Contrôle automatisé électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1 : Changement de dimensions de l'entaille de référence,
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-2/A1, A49-785-2/A1 (06/2020)
Non-destructive testing of steel tubes - Part 2 : automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1 : change of dimensions of the reference notch, change acceptance criteria - Essais non destructifs des tubes en acier - Partie 2 : Contrôle automatisé par courants de Foucault pour la détection des imperfections des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1 : Changement de dimensions de l'entaille de référence,
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-8/A1, A49-785-8/A1 (06/2020)
Non-destructive testing of steel tubes - Part 8 : automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1 : change acceptance criteria
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-3/A2, A49-785-3/A2 (06/2020)
Non-destructive testing of steel tubes - Part 3 : automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections - Amendment 2 : change acceptance criteria - Essais non destructifs des tubes en acier - Partie 3 : Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales -
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
€51.00 -
€61.00
-
DIN EN 12735-1:2020-06
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems, German version EN 12735-1:2020
6/1/2020 - PDF - German - DIN
Learn More€85.79 -
NF EN 13476-2+A1, P16-353-2 (06/2020)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2 : specifications for pipes and fittings with smooth internal and external surface and the system, Type A - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 2 : spécifications pour les
6/1/2020 - Paper - French - AFNOR
Learn More€119.00 -
NF EN 13476-3+A1, P16-353-3 (06/2020)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3 : specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 3 : spécifications pour les
6/1/2020 - Paper - French - AFNOR
Learn More€119.00 -
NF EN 13476-3/IN1, P16-353-3/IN1 (06/2020)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3 : specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissements sans pression enterrés - Systèmes de canalisations à parois structurées en poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 3 : Spécifications pour les
6/1/2020 - Paper - French - AFNOR
Learn More€23.00 -
ASTM F1533-20
Standard Specification for Deformed Polyethylene (PE) Liner
6/1/2020 - PDF - English - ASTM
Learn More€46.00 -
ASTM F1533-20 + Redline
Standard Specification for Deformed Polyethylene (PE) Liner
6/1/2020 - PDF - English - ASTM
Learn More€53.00 -
FD CEN/TR 1591-2, E86-400-2 (06/2020)
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2 : gasket parameters
6/1/2020 - Paper - French - AFNOR
Learn More€99.33 -
€20.00
-
€20.00
-
€20.00
-
NBN EN 13598-2:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
5/27/2020 - PDF - French - NBN
Learn More€142.00 -
NBN EN 13598-2:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
5/27/2020 - PDF - German - NBN
Learn More€142.00 -
NBN EN 13598-2:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
5/27/2020 - PDF - English - NBN
Learn More€142.00 -
NBN EN 13598-1:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers
5/27/2020 - PDF - French - NBN
Learn More€142.00 -
NBN EN 13598-1:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers
5/27/2020 - PDF - German - NBN
Learn More€142.00 -
NBN EN 13598-1:2020
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers
5/27/2020 - PDF - English - NBN
Learn More€142.00 -
NBN EN ISO 7369:2020
Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2020)
5/27/2020 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 7369:2020
Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2020)
5/27/2020 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 7369:2020
Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2020)
5/27/2020 - PDF - English - NBN
Learn More€37.00 -
NBN EN 13766:2018+A1:2020
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
5/27/2020 - PDF - French - NBN
Learn More€121.00 -
NBN EN 13766:2018+A1:2020
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
5/27/2020 - PDF - German - NBN
Learn More€121.00 -
NBN EN 13766:2018+A1:2020
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
5/27/2020 - PDF - English - NBN
Learn More€121.00 -
BS ISO 16134:2020
Earthquake-resistant and subsidence-resistant design of ductile iron pipelines
5/26/2020 - PDF - English - BSI
Learn More€331.00 -
SAE J 2467:2020-05-26
Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending, Single Flaring, Cold Forming, Welding, and Brazing
5/26/2020 - PDF - English - SAE
Learn More€70.00 -
20/30414389 DC:2020
BS EN 13480-4 AMD2. Metallic industrial piping Part 4. Fabrication and installation
5/21/2020 - PDF - English - BSI
Learn More€24.00 -
BS EN 13766:2018+A1:2020
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
5/19/2020 - PDF - English - BSI
Learn More€250.00 -
UNE-EN 1971-1:2020
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
5/13/2020 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN 1971-1:2020
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
5/13/2020 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN 1971-2:2020
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
5/13/2020 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN 1971-2:2020
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
5/13/2020 - PDF - English - AENOR
Learn More€63.60 -
BS ISO 13954:1997+A1:2020
Plastics pipes and fittings. Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
5/6/2020 - PDF - English - BSI
Learn More€151.00 -
€180.00 -
BS ISO 13955:1997+A1:2020
Plastics pipes and fittings. Crushing decohesion test for polyethylene (PE) electrofusion assemblies
5/4/2020 - PDF - English - BSI
Learn More€151.00 -
NF EN 13598-1, P16-363-1 (05/2020)
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1 : specifications for ancillary fittings and shallow chambers - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVCU), polypropylène (PP) et polyéthylène (PE) - Partie 1 : Spécifications relatives aux raccords auxiliaires et aux boîtes de
5/1/2020 - Paper - French - AFNOR
Learn More€86.67 -
NF EN 13598-2, P16-363-2 (05/2020)
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2 : Specifications for manholes and inspection chambers - Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP) et polyéthylène (PE) - Partie 2 : Spécifications relatives aux rega
5/1/2020 - Paper - French - AFNOR
Learn More€99.33 -
ASTM C1277-20
Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
5/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM C1277-20 + Redline
Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
5/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM A1076/A1076M-20
Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
5/1/2020 - PDF - English - ASTM
Learn More€46.00 -
ASTM A1076/A1076M-20 + Redline
Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
5/1/2020 - PDF - English - ASTM
Learn More€53.00 -
ASTM A608/A608M-20
Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
5/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM A608/A608M-20 + Redline
Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
5/1/2020 - PDF - English - ASTM
Learn More€61.00 -
NF ISO 14743, E49-055 (05/2020)
Pneumatic fluid power - Push-in connectors for thermoplastic tubes
5/1/2020 - Paper - French - AFNOR
Learn More€99.33 -
NF EN 16436-1+A3, D36-381-1 (05/2020)
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1 : hoses and tubings
5/1/2020 - Paper - French - AFNOR
Learn More€75.67 -
NF EN 16436-1/IN3, D36-381-1/IN3 (05/2020)
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1 : hoses and tubings
5/1/2020 - Paper - French - AFNOR
Learn More€23.00 -
ASTM C14-20
Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
5/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM C14-20 + Redline
Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
5/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM C14M-20
Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
5/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM C14M-20 + Redline
Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
5/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM C497M-20a
Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
5/1/2020 - PDF - English - ASTM
Learn More€57.00 -
ASTM C497M-20a + Redline
Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
5/1/2020 - PDF - English - ASTM
Learn More€68.00 -
ASTM C1540-20
Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
5/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM C1540-20 + Redline
Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
5/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM A1056-20
Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
5/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM A1056-20 + Redline
Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
5/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM C564-20a
Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
5/1/2020 - PDF - English - ASTM
Learn More€46.00 -
ASTM C564-20a + Redline
Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
5/1/2020 - PDF - English - ASTM
Learn More€53.00 -
NBN EN 12735-1:2020
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
4/29/2020 - PDF - French - NBN
Learn More€121.00 -
NBN EN 12735-1:2020
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
4/29/2020 - PDF - German - NBN
Learn More€121.00 -
NBN EN 12735-1:2020
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
4/29/2020 - PDF - English - NBN
Learn More€121.00 -
NBN EN 14624:2020
Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
4/29/2020 - PDF - French - NBN
Learn More€142.00 -
NBN EN 14624:2020
Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
4/29/2020 - PDF - German - NBN
Learn More€142.00 -
NBN EN 14624:2020
Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
4/29/2020 - PDF - English - NBN
Learn More€142.00 -
BS ISO 13953:2001+A1:2020
Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
4/28/2020 - PDF - English - BSI
Learn More€151.00 -
PD CEN/TR 1591-2:2020
Flanges and their joints. Design rules for gasketed circular flange connections Gasket parameters
4/14/2020 - PDF - English - BSI
Learn More€293.00 -
€23.00
-
DIN 4034-1:2020-04
Prefabricated concrete manholes, unreinforced, steel fibre and reinforced - Part 1: Requirements, test methods and marking for drains and sewers in addition to DIN EN 1917:2003-04.
4/1/2020 - PDF - German - DIN
Learn More€110.00 -
DIN EN 15698-2:2020-04
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene, German version EN 15698-2:2019
4/1/2020 - PDF - German - DIN
Learn More€65.89 -
DIN EN 15698-1:2020-04
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene, German version EN 15698-1:2019
4/1/2020 - PDF - German - DIN
Learn More€72.80 -
DIN EN 10216-2:2020-04
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties, German version EN 10216-2:2013+A1:2019
4/1/2020 - PDF - German - DIN
Learn More€115.33 -
DIN 2413:2020-04
Seamless steel tubes for oil- and water-hydraulic systems - Calculation rules for pipes and elbows for dynamic loads
4/1/2020 - PDF - German - DIN
Learn More€99.35 -
ASTM B360-20
Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
4/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM B360-20 + Redline
Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
4/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM B88M-20
Standard Specification for Seamless Copper Water Tube (Metric)
4/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM B88M-20 + Redline
Standard Specification for Seamless Copper Water Tube (Metric)
4/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM B723-20
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Pipe
4/1/2020 - PDF - English - ASTM
Learn More€46.00 -
ASTM B723-20 + Redline
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Pipe
4/1/2020 - PDF - English - ASTM
Learn More€53.00 -
ASTM F2619/F2619M-20
Standard Specification for High-Density Polyethylene (PE) Line Pipe
4/1/2020 - PDF - English - ASTM
Learn More€57.00 -
ASTM F2619/F2619M-20 + Redline
Standard Specification for High-Density Polyethylene (PE) Line Pipe
4/1/2020 - PDF - English - ASTM
Learn More€68.00 -
UNE 127916:2020
Concrete pipes and fittings, unreinforced, steel fibre and reinforced. National complement to the standard UNE-EN 1916:2008.
4/1/2020 - PDF - Spanish - AENOR
Learn More€116.00 -
DIN 86201:2020-04
Connecting fittings for international fire-extinguishing shore connection - Nominal pressure 16
4/1/2020 - PDF - German - DIN
Learn More€39.35 -
NF EN ISO 7369, E29-820 (04/2020)
Pipework - Metal hoses and hose assemblies - Vocabulary
4/1/2020 - Paper - French - AFNOR
Learn More€48.00 -
BS EN 12735-1:2020
Copper and copper alloys. Seamless, round tubes for air conditioning refrigeration Tubes piping systems
3/31/2020 - PDF - English - BSI
Learn More€250.00 -
SAE J 2551/3:2020-03-30
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement
3/30/2020 - PDF - English - SAE
Learn More€101.00 -
BS EN 14624:2020
Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
3/27/2020 - PDF - English - BSI
Learn More€293.00 -
BS EN 17150:2019
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Test method for determination of short-term compression strength of boxes
3/19/2020 - PDF - English - BSI
Learn More€151.00 -
ASTM D2321-20
Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
3/15/2020 - PDF - English - ASTM
Learn More€57.00 -
ASTM D2321-20 + Redline
Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
3/15/2020 - PDF - English - ASTM
Learn More€68.00 -
CEN/TR 1591-2:2020
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
3/7/2020 - PDF - French - NBN
Learn More€163.00 -
CEN/TR 1591-2:2020
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
3/7/2020 - PDF - English - NBN
Learn More€163.00 -
CEN/TR 1591-2:2020
Flansche und ihre Verbindungen - Regeln für die Auslegung von Flanschverbindungen mit runden Flanschen und Dichtung - Teil 2: Dichtungskennwerte
3/7/2020 - PDF - German - NBN
Learn More€163.00 -
ASTM A1113/A1113M-20e1
Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
3/1/2020 - PDF - English - ASTM
Learn More€57.00 -
ASTM A1113/A1113M-20e1 + Redline
Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
3/1/2020 - PDF - English - ASTM
Learn More€68.00 -
DVGW G 462:2020-03
Gas Pipework made of Steel Pipes for an Operating Pressure up to and including 16 bar
3/1/2020 - PDF - German - DVGW
Learn More€61.59 -
DVGW G 472:2020-03
Gas Pipework made of Plastic Pipes for an Operating Pressure up to and including 16 bar, Installation
3/1/2020 - - - DVGW
Learn More€69.61 -
DIN EN 448:2020-03
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene, German version EN 448:2019
3/1/2020 - PDF - German - DIN
Learn More€104.95 -
DIN EN 488:2020-03
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene, German version EN 488:2019
3/1/2020 - PDF - German - DIN
Learn More€99.35 -
DIN EN 14419:2020-03
District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems, German version EN 14419:2019
3/1/2020 - PDF - German - DIN
Learn More€85.79 -
DIN EN 253:2020-03
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene, German version EN 253:2019
3/1/2020 - PDF - German - DIN
Learn More€126.26 -
ASTM A671/A671M-20
Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
3/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM A671/A671M-20 + Redline
Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
3/1/2020 - PDF - English - ASTM
Learn More€61.00 -
NF EN 12735-1, A51-126-1 (03/2020)
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1 : tubes for piping systems
3/1/2020 - Paper - French - AFNOR
Learn More€75.67 -
ASTM D3262-20
Standard Specification for “,Fiberglass”, (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
3/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM D3262-20 + Redline
Standard Specification for “,Fiberglass”, (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
3/1/2020 - PDF - English - ASTM
Learn More€61.00 -
NF D36-128 (03/2020)
Quick couplings with automatic obturation for the external connection by flexible piping of non domestic gas-fired appliances
3/1/2020 - Paper - French - AFNOR
Learn More€86.50 -
DIN 85389:2020-03
Ships and marine technology - Flanges on castings extra light duty - DN 32 to DN 50, PN up to 25, DN 65 to DN 125, PN up to 10 - Principles of design
3/1/2020 - PDF - German - DIN
Learn More€32.34 -
DIN 86200:2020-03
Fire extinguishing and wash deck installations - Hose couplings, armatures, hoses, accessories - Summary of types for shipbuilding
3/1/2020 - PDF - German - DIN
Learn More€39.35 -
PD CEN/TS 1401-2:2020 + Redline
Tracked Changes. Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance the assessment of conformity
2/29/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 15655-1:2018 + Redline
Tracked Changes. Ductile iron pipes, fittings and accessories. Requirements test methods for organic linings of ductile pipes Polyurethane lining
2/28/2020 - PDF - English - BSI
Learn More€326.00 -
20/30405524 DC:2020
BS EN ISO 15877-2 AMD2. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Part 2. Pipes
2/28/2020 - PDF - English - BSI
Learn More€24.00 -
BS ISO 10804:2018 + Redline
Tracked Changes. Restrained joint systems for ductile iron pipelines. Design rules and type testing
2/27/2020 - PDF - English - BSI
Learn More€197.00 -
PD CEN/TS 1401-2:2020
Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance the assessment of conformity
2/27/2020 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 13845:2015 + Redline
Tracked Changes. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leaktightness under internal pressure and with angular deflection
2/27/2020 - PDF - English - BSI
Learn More€197.00 -
BS EN ISO 11298-3:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes
2/27/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 11298-1:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground water supply networks General
2/27/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 12007-3:2015 + Redline
Tracked Changes. Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Specific functional requirements steel
2/27/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 11299-3:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes
2/27/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 11297-3:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes
2/27/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 11299-1:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground gas supply networks General
2/27/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 11297-1:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground drainage and sewerage networks under pressure General
2/27/2020 - PDF - English - BSI
Learn More€326.00 -
€235.00
