23 : Fluid systems and components for general use
-
€48.00
-
NF E29-681 (08/1981) (R2011)
Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 25,8 - Taper 3/26 (6 degrees C 38'), 14 TPI SI. Gauge requirements.
8/1/1981 - Paper - French - AFNOR
Learn More€34.50 -
NF E29-679 (08/1981)
Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 16.4 - Taper 3/20, 14 TPI SI. Gauge requirements.
8/1/1981 - Paper - French - AFNOR
Learn More€34.50 -
NF E29-683 (08/1981) (R2011)
Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 34 - Taper 8.736 per cent (5 degrees C), Pitch 2 SI. Gauge erquirements.
8/1/1981 - Paper - French - AFNOR
Learn More€34.50 -
ISO 5388:1981 (R2021)
Stationary air compressors
Safety rules and code of practice
8/1/1981 - Paper - French - ISO
Learn More€148.00 -
ISO 5388:1981 (R2021)
Stationary air compressors
Safety rules and code of practice
8/1/1981 - Paper - English - ISO
Learn More€148.00 -
€22.99
-
NBN I 03-004:1981
Construction of horizontal tanks for liquid hydrocarbons - Cylindrical double shell steel tanks with capacity from 0,5 up to 250 m3
7/1/1981 - PDF - French, Dutch - NBN
Learn More€58.00 -
NBN I 03-003:1981
Horizontal cylindrical steel tanks for liquid hydrocarbons (flash point <= 55 °C), with capacity from 0,5 up to 250 m3 - Transport and installation
7/1/1981 - PDF - French, Dutch - NBN
Learn More€89.00 -
ISO 3419:1981 (R2020)
Non-alloy and alloy steel butt-welding fittings
General information
7/1/1981 - Paper - French - ISO
Learn More€110.00 -
ISO 3419:1981 (R2020)
Non-alloy and alloy steel butt-welding fittings
General information
7/1/1981 - Paper - English - ISO
Learn More€110.00 -
NBN I 03-002:1981
Horizontal cylindrical steel tanks for liquid hydrocarbons (55 °C < flash point <= 100 °C), with capacity from 0,5 up to 250 m3 - Transport and installation
6/30/1981 - PDF - French, Dutch - NBN
Learn More€89.00 -
NBN I 03-001:1981
Construction of horizontal tanks for liquid hydrocarbons - Cylindrical single shell steel tanks with capacity from 0,5 up to 250 m3
6/1/1981 - PDF - French, Dutch - NBN
Learn More€58.00 -
€148.00
-
ISO 5251:1981 (R2020)
Stainless steel butt-welding fittings
General information
4/1/1981 - Paper - English - ISO
Learn More€148.00 -
€58.00
-
€58.00
-
DIN 28400-5:1981-03
Vacuum technology, terms and definitions, vacuum drying and lyophilisation
3/1/1981 - PDF - German - DIN
Learn More€45.98 -
NF T54-038 (02/1981) (R2006)
Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Dimensional caracteristics.
2/1/1981 - Paper - French - AFNOR
Learn More€48.00 -
NF T54-029 (02/1981) (R2006)
Plastics. Moulded unplasticized PVC fittings. Pressure series. Specifications.
2/1/1981 - Paper - French - AFNOR
Learn More€60.67 -
NBN I 06-006:1980
Ductile or grey cast iron pipes and fittings with socket or with spigot for pressure pipelines - Outward dimensions and tolerances
1/10/1981 - PDF - French, Dutch - NBN
Learn More€58.00 -
NBN I 06-007:1980
Ductile or grey cast iron fittings with socket for PVC-U pressure pipelines
1/10/1981 - PDF - French, Dutch - NBN
Learn More€58.00 -
€34.67
-
DIN 1945-1:1980-11
Displacement compressor, thermodynamic acceptance and performance test
11/1/1980 - PDF - German - DIN
Learn More€136.82 -
NF T54-027 (11/1980) (R2010)
Plastics. Pressure fittings and solvent welded joints of unplasticized PVC. Determination of the extractability of lead and tin with watter.
11/1/1980 - Paper - French - AFNOR
Learn More€34.67 -
€65.89
-
DIN 28400-6:1980-10
Vacuum technology, terms and definitions, surface analysis techniques
10/1/1980 - PDF - German - DIN
Learn More€45.98 -
€48.00
-
€17.00
-
M82-400 (06/1980) (R2005)
Mining equipment. Recommendations for the manufacturers of machinery using hydraulic transmissions for headings underground.
6/1/1980 - Paper - French - AFNOR
Learn More€60.67 -
€48.00
-
€48.00
-
DIN 24336:1980-06
Fluidpower, hydraulic cylinder 100 bar, mounting dimensions
6/1/1980 - PDF - German - DIN
Learn More€22.99 -
DIN 24374-1:1980-05
Surface treatment, determination of characteristics of air driven piston pumps
5/1/1980 - PDF - German - DIN
Learn More€32.34 -
DIN 5435:1980-05
Hand-pumps, two hole tube flanges with shoulder, for nominal pressure 1 to 2,5
5/1/1980 - PDF - German - DIN
Learn More€22.99 -
NF M88-514 (03/1980) (R2010)
Dual material tanks for underground storage of liquid petroleum products. Steel exterior tank. Plastic interior tank.
3/1/1980 - Paper - French - AFNOR
Learn More€48.00 -
NBN I 06-004:1979
Grey cast iron pipes and fittings for pressure pipelines - General technical requirements
2/16/1980 - PDF - French, Dutch - NBN
Learn More€58.00 -
NBN I 06-005:1979
Ductile or grey cast iron fittings with turned ends for pressure pipelines - Dimensions and tolerances
2/16/1980 - PDF - French, Dutch - NBN
Learn More€37.00 -
NF M88-516 (11/1979) (R2009)
Steel tanks with outside concrete coating for underground storage of mineral oils.
11/1/1979 - Paper - French - AFNOR
Learn More€48.00 -
BS 5791-1:1979
Glossary of terms for compressors, pneumatic tools and machines General
10/31/1979 - PDF - English - BSI
Learn More€151.00 -
BS 5791-2:1979
Glossary of terms for compressors, pneumatic tools and machines Compressors
10/31/1979 - PDF - English - BSI
Learn More€151.00 -
ISO 5941:1979 (R2021)
Compressors, pneumatic tools and machines
Preferred pressures
9/1/1979 - Paper - French - ISO
Learn More€48.00 -
ISO 5941:1979 (R2021)
Compressors, pneumatic tools and machines
Preferred pressures
9/1/1979 - Paper - English - ISO
Learn More€48.00 -
ISO 3530:1979 (R2021)
Vacuum technology
Mass-spectrometer-type leak-detector calibration
9/1/1979 - Paper - French - ISO
Learn More€72.00 -
ISO 3530:1979 (R2021)
Vacuum technology
Mass-spectrometer-type leak-detector calibration
9/1/1979 - Paper - English - ISO
Learn More€72.00 -
DIN 45635-26:1979-07
Measurement of airborne noise emitted by machines, enveloping surface method, hydraulic pumps
7/1/1979 - PDF - German - DIN
Learn More€22.99 -
ISO 4439:1979 (R2020)
Unplasticized polyvinyl chloride (PVC) pipes and fittings
Determination and specification of density
7/1/1979 - Paper - French - ISO
Learn More€48.00 -
ISO 4439:1979 (R2020)
Unplasticized polyvinyl chloride (PVC) pipes and fittings
Determination and specification of density
7/1/1979 - Paper - English - ISO
Learn More€48.00 -
ISO 4132:1979 (R2023)
Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure
Laying lengths and size of threads
7/1/1979 - Paper - French - ISO
Learn More€48.00 -
ISO 4132:1979 (R2023)
Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure
Laying lengths and size of threads
7/1/1979 - Paper - English - ISO
Learn More€48.00 -
NF E29-664 (05/1979) (R1999)
Valve outlets for gas cylinders. List of standard provisions or those in use.
5/1/1979 - Paper - French - AFNOR
Learn More€108.00 -
UNE 26245:1979
NON-METALLIC MATERIALS FOR THE MANUFACTURE OF GASKETS IN THE AUTOMOTIVE INDUSTRY.
4/15/1979 - PDF - Spanish - AENOR
Learn More€39.00 -
€22.99
-
NF M88-550 (01/1979) (R2009)
Storage tanks in reinforced plastic. Underground tanks for liquid petroleum products.
1/1/1979 - Paper - French - AFNOR
Learn More€48.00 -
DIN 44974-3:1978-12
Electric household fans, characteristics of performance, requirements
12/1/1978 - PDF - German - DIN
Learn More€22.99 -
DIN 44974-1:1978-12
Electric household fans, characteristics of performance, definitions
12/1/1978 - PDF - German - DIN
Learn More€22.99 -
DIN 44974-2:1978-12
Electric household fans, characteristics of performance, tests
12/1/1978 - PDF - German - DIN
Learn More€22.99 -
DIN 44974-2:1978-12
Electric household fans, characteristics of performance, tests
12/1/1978 - PDF - English - DIN
Learn More€22.71 -
ISO 4059:1978 (R2020)
Polyethylene (PE) pipes
Pressure drop in mechanical pipe-jointing systems
9/1/1978 - Paper - French - ISO
Learn More€48.00 -
ISO 4059:1978 (R2020)
Polyethylene (PE) pipes
Pressure drop in mechanical pipe-jointing systems
9/1/1978 - Paper - English - ISO
Learn More€48.00 -
DIN ISO 3939:1978-08
Fluid Power Systems and Components, Multiple Lip Packing Sets, Methods for Measuring Stack Heights
8/1/1978 - PDF - German - DIN
Learn More€32.34 -
€17.00
-
NF E29-134 (07/1978) (R2013)
Safety release devices with built-in stop tap and two G 1/2 male union connections for domestic appliances using mains gas fuels.
7/1/1978 - Paper - French - AFNOR
Learn More€60.67 -
DIN 28400-7:1978-07
Vakuum technology, terms and definitions, vacuum metallurgie
7/1/1978 - PDF - German - DIN
Learn More€39.35 -
€14.00
-
€14.00
-
€14.00
-
€14.00
-
€27.00
-
NBN E 48-003:1976
Hydraulic pumps and motors - Geometric displacements
12/16/1977 - PDF - French, Dutch - NBN
Learn More€37.00 -
NF T54-040 (11/1977) (R2012)
Plastics. Moulded un-plasticized fittings.dimensions. - Matières plastiques
11/1/1977 - Paper - French - AFNOR
Learn More€86.67 -
NF T81-021 (10/1977)
Transportation and handling of liquefied gases. Tankers for use on inland waterways. Safety during transfert operations. Intervention device with electro-hydro-pneumatic control.
10/1/1977 - Paper - French - AFNOR
Learn More€60.67 -
€14.00
-
BS 4508-4:1977
Thermally insulated underground pipelines Specific testing and inspection requirements for cased systems without air gap
6/30/1977 - PDF - English - BSI
Learn More€180.00 -
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
NBN B 54-103:1977
Iron castings for drainage in buildings - Square or rectangular manhole frame with cover
6/1/1977 - PDF - French, Dutch - NBN
Learn More€37.00 -
ISO 3603:1977 (R2023)
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints
Pressure test for leakproofness
4/1/1977 - Paper - French - ISO
Learn More€48.00 -
ISO 3603:1977 (R2023)
Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints
Pressure test for leakproofness
4/1/1977 - Paper - English - ISO
Learn More€48.00 -
BS 1553-1:1977
Specification for graphical symbols general engineering Piping systems and plant
3/31/1977 - PDF - English - BSI
Learn More€331.00 -
€25.00
-
ISO 3114:1977 (R2023)
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply
Extractability of lead and tin
3/1/1977 - Paper - French - ISO
Learn More€48.00 -
ISO 3939:1977 (R2019)
Fluid power systems and components
Multiple lip packing sets
3/1/1977 - Paper - French - ISO
Learn More€48.00 -
ISO 3939:1977 (R2019)
Fluid power systems and components
Multiple lip packing sets
3/1/1977 - Paper - English - ISO
Learn More€48.00 -
ISO 3661:1977 (R2023)
End-suction centrifugal pumps
Baseplate and installation dimensions
2/1/1977 - Paper - French - ISO
Learn More€48.00 -
ISO 3661:1977 (R2023)
End-suction centrifugal pumps
Baseplate and installation dimensions
2/1/1977 - Paper - English - ISO
Learn More€48.00 -
DVGW G 620:1976-12
Installation of gas compressors with a working overpressure of up to 1 bar and a drive of up to 50 kW for gas consumption facilities
12/1/1976 - PDF - German - DVGW
Learn More€41.95 -
€89.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
NBN B 54-102:1976
Iron castings for drainage in buildings - Gully hole with bell air stop
9/1/1976 - PDF - French, Dutch - NBN
Learn More€37.00 -
€57.29
-
NBN A 35-101/A1:1976
Piping and pipe-couplings - Extremities' measurements of not threadable steel pipes for water- or gas pipe-lines and sewers - General definitions
5/25/1976 - PDF - French, Dutch - NBN
Learn More€20.00 -
NBN A 35-102/A1:1976
Piping and pipe-couplings - Extremities measurements of not threadable steel pipes for water- or gas pipe-lines and sewers - Straight extremities for butt-welding
5/25/1976 - PDF - French, Dutch - NBN
Learn More€20.00 -
NBN A 35-103/A1:1976
Piping and pipe-couplings - Extremities' measurements of not threadable steel pipes for water- or gas pipe-lines and sewers - "Isotherm" type-extremities for butt-welding
5/25/1976 - PDF - French, Dutch - NBN
Learn More€20.00 -
NBN A 35-104/A1:1976
Piping and pipe-couplings - Extremities' measurements of not threadable steel pipes for water- or gas pipe-lines and sewers - Extremities with single fitting for peripheral welding
5/25/1976 - PDF - French, Dutch - NBN
Learn More€20.00 -
NBN A 35-105/A1:1976
Piping and pipe-couplings - Extremities' measurements of not threadable steel pipes for water- or gas pipe-lines and sewers - "H"-joint extremities
5/25/1976 - PDF - French, Dutch - NBN
Learn More€20.00 -
BS 5327:1976
Specification. Swept elbow bends for fluid power applications
3/31/1976 - PDF - English - BSI
Learn More€151.00 -
ISO 3514:1976 (R2022)
Chlorinated polyvinyl chloride (CPVC) pipes and fittings
Specification and determination of density
2/1/1976 - Paper - French - ISO
Learn More€48.00 -
ISO 3514:1976 (R2022)
Chlorinated polyvinyl chloride (CPVC) pipes and fittings
Specification and determination of density
2/1/1976 - Paper - English - ISO
Learn More€48.00 -
NBN B 54-101:1976
Iron castings for drainage in buildings - Technical specifications
2/1/1976 - PDF - French, Dutch - NBN
Learn More€58.00 -
E35-403 (12/1975) (R2015)
Safety requirements for the refrigerating system of room air conditioners.
12/1/1975 - Paper - French - AFNOR
Learn More€48.00 -
BS 3463:1975
Specification for observation and gauge glasses for pressure vessels
10/31/1975 - PDF - English - BSI
Learn More€250.00 -
BS 5285:1975
Specification. Performance of a.c. electric ventilating fans and regulators for non-industrial use
10/31/1975 - PDF - English - BSI
Learn More€151.00 -
BS 1306:1975
Specification for copper and copper alloy pressure piping systems
9/30/1975 - PDF - English - BSI
Learn More€151.00 -
LN 29737-2:1975-07
Hose assemblies for oxygen, of polytetrafluorethylene, pressure class II, technical specification
7/1/1975 - PDF - German - DIN
Learn More€112.62 -
LN 29874:1975-07
Hose assemblies of polytetrafluorethylene, pressure class V
7/1/1975 - PDF - German - DIN
Learn More€57.29 -
NF T81-101 (05/1975) (R2001)
Transport and handling of liquid chemical products and hydrocarbons. Half symetric coupling (guillemin system) with rotating lock-nominal pressure 16.
5/1/1975 - Paper - French - AFNOR
Learn More€34.67 -
BS 1571-2:1975
Specification for testing of positive displacement compressors and exhausters Methods simplified acceptance air
4/30/1975 - PDF - English - BSI
Learn More€250.00 -
UNE 19050:1975 (R1999)
WELDED PLAIN END PIPE MADE FROM UNALLOYED STEEL AND WITH NO QUALITY REQUIREMENTS.
2/15/1975 - PDF - Spanish - AENOR
Learn More€14.00 -
ISO 2858:1975
End-suction centrifugal pumps (rating 16 bar)
Designation, nominal duty point and dimensions
2/1/1975 - Paper - French - ISO
Learn More€48.00 -
ISO 2858:1975
End-suction centrifugal pumps (rating 16 bar)
Designation, nominal duty point and dimensions
2/1/1975 - Paper - English - ISO
Learn More€48.00 -
€22.99
-
LN 29855:1974-11
Fittings assembly, ring locked, for solderless pipe fittings with coupling sleeve, flareless, complete fitting
11/1/1974 - PDF - German - DIN
Learn More€57.29 -
LN 29855:1974-11
Fittings assembly, ring locked, for solderless pipe fittings with coupling sleeve, flareless, complete fitting
11/1/1974 - PDF - English - DIN
Learn More€28.60 -
LN 29856:1974-11
Unions, ring locked, for solderless pipe fittings with coupling sleeves, flareless
11/1/1974 - PDF - German - DIN
Learn More€57.29 -
LN 29856:1974-11
Unions, ring locked, for solderless pipe fittings with coupling sleeves, flareless
11/1/1974 - PDF - English - DIN
Learn More€28.60 -
LN 29858:1974-11
Internal thread bosses for fitting assemblies, ring locked, design dimensions
11/1/1974 - PDF - German - DIN
Learn More€57.29 -
LN 29858:1974-11
Internal thread bosses for fitting assemblies, ring locked, design dimensions
11/1/1974 - PDF - English - DIN
Learn More€28.60 -
LN 29859:1974-11
Unions, ring locked, for solderless pipe fittings with coupling sleeves, flareless, directions for installation
11/1/1974 - PDF - German - DIN
Learn More€57.29 -
LN 29859:1974-11
Unions, ring locked, for solderless pipe fittings with coupling sleeves, flareless, directions for installation
11/1/1974 - PDF - English - DIN
Learn More€28.60 -
€25.67
-
DIN 3160:1974-08
Through-valves for refrigerant circuits, nominal pressure 25 bar
8/1/1974 - PDF - German - DIN
Learn More€22.99 -
DIN 3161:1974-08
Elbow valves for refrigerant circuits, nominal pressure 25 bar
8/1/1974 - PDF - German - DIN
Learn More€22.99 -
DIN 3163:1974-08
Control through valves for refrigerant circuits, nominal pressure 25 bar
8/1/1974 - PDF - German - DIN
Learn More€22.99 -
€22.99
-
DIN 3162:1974-08
Screwed caps for valves for refrigerant circuits, nominal pressure 25 bar
8/1/1974 - PDF - German - DIN
Learn More€22.99 -
€58.00
-
€22.99
-
€121.00
-
DIN 24251:1973-08
Multistage centrifugal pumps, mine drainage pumps, with pump total head up to 1000 m at speed of rotation 1500 l/min
8/1/1973 - PDF - German - DIN
Learn More€22.99 -
NF S61-707 (02/1973) (R2013)
Fire fighting equipment. Ventilation. Type semi-couplings for fire use : dn 300.
2/1/1973 - Paper - French - AFNOR
Learn More€30.33 -
NBN A 35-104:1972
Piping and pipe-couplings - Extremities' measurements of not threadable steel pipes for water- or gas pipe-lines and sewers - Extremities with single fitting for peripheral welding
4/1/1972 - PDF - French, Dutch - NBN
Learn More€58.00 -
NBN A 35-105:1972
Piping and pipe-couplings - Extremities' measurements of not threadable steel pipes for water- or gas pipe-lines and sewers - "H"-joint extremities
4/1/1972 - PDF - French, Dutch - NBN
Learn More€58.00 -
NBN 827:1971
Robinetterie sanitaire - Coupe-air tubulaire |Kraanwerk voor sanitair - Buisvormige stankafsluiter
3/21/1972 - PDF - French, Dutch - NBN
Learn More€37.00 -
NBN 828:1971
Robinetterie sanitaire - Coupe-air ordinaire type-bouteille |Kraanwerk voor sanitair - Bekervormige stankafsluiter
3/21/1972 - PDF - French, Dutch - NBN
Learn More€37.00 -
NBN A 35-102:1972
Piping and pipe-couplings - Extremities measurements of not threadable steel pipes for water- or gas pipe-lines and sewers - Straight extremities for butt-welding
3/1/1972 - PDF - French, Dutch - NBN
Learn More€58.00 -
NBN A 35-103:1972
Piping and pipe-couplings - Extremities' measurements of not threadable steel pipes for water- or gas pipe-lines and sewers - "Isotherm" type-extremities for butt-welding
3/1/1972 - PDF - French, Dutch - NBN
Learn More€58.00 -
NBN A 35-101:1972
Piping and pipe-couplings - Extremities' measurements of not threadable steel pipes for water- or gas pipe-lines and sewers - General definitions
2/1/1972 - PDF - French, Dutch - NBN
Learn More€37.00 -
€184.58
-
LN 29857:1971-08
Lockrings, for solderless pipe fittings with coupling sleeves, flareless
8/1/1971 - PDF - German - DIN
Learn More€57.29 -
PD 6439:1969
A review of the methods of calculating stresses due to local loads and local attachments of pressure vessels
11/28/1969 - PDF - English - BSI
Learn More€151.00 -
PD 6438:1969
A review of present methods for design of bolted flanges for pressure vessels
10/31/1969 - PDF - English - BSI
Learn More€151.00 -
€151.00
-
BS 4082-1:1969
Specification for external dimensions vertical in-line centrifugal pumps 'I' Type
4/30/1969 - PDF - English - BSI
Learn More€180.00 -
BS 4082-2:1969
Specification for external dimensions vertical in-line centrifugal pumps 'U' Type
4/30/1969 - PDF - English - BSI
Learn More€180.00 -
€57.29
-
BS 4151:1967
Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in2 (gauge)
3/22/1967 - PDF - English - BSI
Learn More€151.00 -
BS 778:1966
Specification for steel pipes and joints for hydraulic purposes
1/21/1966 - PDF - English - BSI
Learn More€180.00 -
€293.00
-
€17.00
-
DIN 3159:1965-05
Assembling dimensions of flanges for fittings for refrigerating installations up to nominal pressure 25
5/1/1965 - PDF - German - DIN
Learn More€22.99 -
€22.99
-
DVGW G 430:1964-05
Guidelines for the erection and operation of low-pressure gas containers
5/1/1964 - PDF - German - DVGW
Learn More€65.18 -
NBN 482:1959
Robinet de sûreté DN 20 pour les distributions d'eau |Stopkraan ND 20 voor waterleidingen
11/26/1959 - PDF - French, Dutch - NBN
Learn More€58.00 -
NF M88-610 (05/1959) (R2009)
Petroleum industry. Calibration identification plate for containers.
5/1/1959 - Paper - French - AFNOR
Learn More€25.67 -
LN 29553:1958-11
Provisional technical terms of delivery for seamless internal pressure pipes of stainless steels, for air transport
11/1/1958 - PDF - German - DIN
Learn More€146.17 -
LN 29554:1958-11
Provisional technical terms of delivery for conduit pipes and riveted pipes of stainless steel, for air transport
11/1/1958 - PDF - German - DIN
Learn More€129.72 -
€27.00
-
€25.67
-
€12.67
-
BS 1906:1952
Specification for hose couplings (air and water) (? in. to 1¼ in. nominal sizes)
12/5/1952 - PDF - English - BSI
Learn More€348.00 -
€17.00
-
BS 1782:1951
Specification for couplings for suction and delivery hose (1½ in. to 8 in. nominal sizes) other than fire hose couplings
8/22/1951 - PDF - English - BSI
Learn More€331.00 -
NBN 226:1950
Robinets de bouteilles à gaz |Kranen voor gasflessen
10/1/1950 - PDF - French, Dutch - NBN
Learn More€58.00 -
BS 1553-3:1950
Graphical symbols for general engineering. compressing plant
9/7/1950 - PDF - English - BSI
Learn More€151.00 -
BS 1655:1950
Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)
7/12/1950 - PDF - English - BSI
Learn More€151.00 -
€39.35
-
€28.60
-
UNE-CEN/TS 1455-2:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity (Endorsed by Asociación Española de Normalización in December of 2023.)
4/19/2024 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 13480-4:2017/A1:2023
Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in January of 2024.)
4/19/2024 - PDF - English - AENOR
Learn More€28.00 -
UNE-EN 13480-4:2017/A2:2023
Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in January of 2024.)
4/19/2024 - PDF - English - AENOR
Learn More€28.00 -
UNE-CEN/TS 17152-3:2022/AC:2024
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Assessment of conformity (Endorsed by Asociación Española de Normalización in March of 2024.)
4/19/2024 - PDF - English - AENOR
Learn More€0.00 -
Adjunct to D2809 Test Method for Cavitation Corrosion and Erosion-Corrosion
Characteristics of Aluminum Pumps With Engine Coolants
4/19/2024 - Papier - English - ASTM
Learn More€76.85 -
UNE-EN 253:2019+A1:2023
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene (Endorsed by Asociación Española de Normalización in February of 2024.)
4/19/2024 - PDF - English - AENOR
Learn More€80.00 -
UNE-EN 17878-1:2024
District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 1: Classification, general requirements and test methods (Endorsed by Asociación Española de Normalización in April of 2024.)
4/19/2024 - PDF - English - AENOR
Learn More€71.00 -
UNE-EN 17878-2:2024
District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 2: Requirements and test methods for bonded systems with plastic service pipes (Endorsed by Asociación Española de Normalización in April of 2024.)
4/19/2024 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 17878-3:2024
District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 3: Requirements and test methods for non bonded systems with plastic service pipes (Endorsed by Asociación Española de Normalización in April of 2024.)
4/19/2024 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN IEC 63086-2-1:2024
Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 2-1: Particular requirements for determination of reduction of particles (Endorsed by Asociación Española de Normalización in April of 2024.)
4/19/2024 - PDF - English - AENOR
Learn More€76.00 -
€76.85
-
€61.25
-
Adjunct to F1734 Practice for Qualification of a Combination of Squeeze Tool
Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
4/19/2024 - Paper - English - ASTM
Learn More€76.85 -
UNE-CEN/TS 1566-2:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity (Endorsed by Asociación Española de Normalización in December of 2023.)
4/19/2024 - PDF - English - AENOR
Learn More€70.00 -
UNE-EN 12201-1:2024
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General (Endorsed by Asociación Española de Normalización in March of 2024.)
4/19/2024 - PDF - English - AENOR
Learn More€71.00 -
Adjunct to E595 Test Method for Total Mass Loss and Collected Volatile
Condensable Materials from Outgassing in a Vacuum Environment
4/19/2024 - Paper - English - ASTM
Learn More€110.66