23 : Fluid systems and components for general use
-
NBN EN ISO 10497:2022
Testing of valves - Fire type-testing requirements (ISO 10497:2022)
11/16/2022 - PDF - English - NBN
Learn More€58.00 -
BS EN 15969-2:2022 + Redline
Tracked Changes. Tanks for transport of dangerous goods. Digital interface the data transfer between tank vehicle and with stationary facilities Commercial logistic
11/16/2022 - PDF - English - BSI
Learn More€432.00 -
BS EN 16304:2022 + Redline
Tracked Changes. Automatic vent valves for gas burners and gas burning appliances
11/16/2022 - PDF - English - BSI
Learn More€432.00 -
NBN EN 12067-2:2022
Dispositifs de commande et de sécurité pour les brûleurs et les appareils utilisant des combustibles gazeux ou liquides - Dispositifs électroniques de régulation - Partie 2 : Régulation et surveillance du rapport air/combustible de type électronique
11/16/2022 - PDF - French - NBN
Learn More€184.00 -
NBN EN 1643:2022
Dispositifs de commande et de sécurité pour brûleurs à gaz et appareils à gaz - Systèmes de contrôle d'étanchéité pour robinets automatiques de sectionnement
11/16/2022 - PDF - French - NBN
Learn More€163.00 -
UNE-EN 14427:2022
LPG equipment and accessories - Transportable refillable composite cylinders for LPG - Design and construction
11/16/2022 - PDF - Spanish - AENOR
Learn More€102.00 -
UNE-EN 14427:2022
LPG equipment and accessories - Transportable refillable composite cylinders for LPG - Design and construction
11/16/2022 - PDF - English - AENOR
Learn More€122.40 -
NBN EN 12067-2:2022
Sicherheits- und Regeleinrichtungen für Brenner und Brennstoffgeräte für gasförmige oder flüssige Brennstoffe - Regel- und Steuerfunktionen in elektronischen Systemen - Teil 2: Elektronische Gas-Luft-Verbundregel- und Überwachungseinrichtungen
11/16/2022 - PDF - German - NBN
Learn More€184.00 -
NBN EN 1643:2022
Sicherheits-, Regel- und Steuereinrichtungen für Brenner und Brennstoffgeräte für gasförmige und/oder flüssige Brennstoffe - Ventilüberwachungssysteme für automatische Absperrventile
11/16/2022 - PDF - German - NBN
Learn More€163.00 -
NBN EN 12067-2:2022
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control/supervision of the electronic type
11/16/2022 - PDF - English - NBN
Learn More€184.00 -
NBN EN 1643:2022
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Valve proving systems for automatic shut-off valves
11/16/2022 - PDF - English - NBN
Learn More€163.00 -
UNE-EN 17527:2022
Helium cryostats - Protection against excessive pressure
11/16/2022 - PDF - Spanish - AENOR
Learn More€151.00 -
UNE-EN 17527:2022
Helium cryostats - Protection against excessive pressure
11/16/2022 - PDF - English - AENOR
Learn More€181.20 -
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
11/16/2022 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
11/16/2022 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 13844:2022
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
11/16/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 13844:2022
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
11/16/2022 - PDF - English - AENOR
Learn More€69.60 -
BS EN ISO 13844:2022 + Redline
Tracked Changes. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
11/15/2022 - PDF - English - BSI
Learn More€235.00 -
ASTM F1743-22
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
11/15/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1743-22 + Redline
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
11/15/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM F1741-22
Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
11/15/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1741-22 + Redline
Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
11/15/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM F1867-22
Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
11/15/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1867-22 + Redline
Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
11/15/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM F2019-22
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
11/15/2022 - PDF - English - ASTM
Learn More€60.00 -
ASTM F2019-22 + Redline
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
11/15/2022 - PDF - English - ASTM
Learn More€72.00 -
ASTM F1962-22
Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
11/15/2022 - PDF - English - ASTM
Learn More€60.00 -
ASTM F1962-22 + Redline
Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
11/15/2022 - PDF - English - ASTM
Learn More€72.00 -
ASTM F2599-22
Standard Practice for Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place Liner
11/15/2022 - PDF - English - ASTM
Learn More€48.00 -
ASTM F2599-22 + Redline
Standard Practice for Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place Liner
11/15/2022 - PDF - English - ASTM
Learn More€57.00 -
BS EN 15969-2:2022
Tanks for transport of dangerous goods. Digital interface the data transfer between tank vehicle and with stationary facilities Commercial logistic
11/14/2022 - PDF - English - BSI
Learn More€331.00 -
BS EN 15714-3:2022 + Redline
Tracked Changes. Industrial valves. Actuators Pneumatic part-turn actuators for industrial Basic requirements
11/14/2022 - PDF - English - BSI
Learn More€382.00 -
BS ISO 18828-5:2019
Industrial automation systems and integration. Standardized procedures for production engineering Manufacturing change management
11/11/2022 - PDF - English - BSI
Learn More€293.00 -
BS EN 15714-6:2022
Industrial valves. Actuators Hydraulic linear actuators for industrial Basic requirements
11/11/2022 - PDF - English - BSI
Learn More€293.00 -
BS EN 1852-1:2018+A1:2022
Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Specifications pipes, fittings the system
11/8/2022 - PDF - English - BSI
Learn More€293.00 -
BS ISO 8132:2022 + Redline
Tracked Changes. Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
11/8/2022 - PDF - English - BSI
Learn More€326.00 -
€293.00
-
BS EN 88-2:2022
Safety and control devices for gas burners burning appliances Pressure regulators inlet pressures above 50 kPa up to including 500
11/4/2022 - PDF - English - BSI
Learn More€348.00 -
BS EN 12952-3:2022
Water-tube boilers and auxiliary installations Design calculation for pressure parts of the boiler
11/3/2022 - PDF - English - BSI
Learn More€449.00 -
BS EN 161:2022
Automatic shut-off valves for gas burners and gas appliances
11/3/2022 - PDF - English - BSI
Learn More€377.00 -
BS EN ISO 15874-2:2013+A2:2022
Plastics piping systems for hot and cold water installations. Polypropylene (PP) Pipes
11/2/2022 - PDF - English - BSI
Learn More€250.00 -
NBN EN 15969-2:2022
Citernes destinées au transport de matières dangereuses - Interface numérique pour le transfert de données entre des véhicules-citernes et des installations fixes - Partie 2 : Données commerciales et logistiques
11/2/2022 - PDF - French - NBN
Learn More€163.00 -
NBN EN 15969-2:2022
Tanks für die Beförderung gefährlicher Güter - Digitale Schnittstelle für den Datenaustausch zwischen Tankfahrzeugen und stationären Einrichtungen - Teil 2: Kommerzielle und logistische Daten
11/2/2022 - PDF - German - NBN
Learn More€163.00 -
NBN EN 15969-2:2022
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data
11/2/2022 - PDF - English - NBN
Learn More€163.00 -
UNE-EN 12952-10:2022
Water-tube boilers and auxiliary installations - Part 10: Requirements for safety devices against excessive pressure
11/2/2022 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN 12952-10:2022
Water-tube boilers and auxiliary installations - Part 10: Requirements for safety devices against excessive pressure
11/2/2022 - PDF - English - AENOR
Learn More€75.60 -
UNE 60719:2022
Fittings for hand operated metallic valves for installations using gaseous fuels.
11/2/2022 - PDF - Spanish - AENOR
Learn More€73.00 -
€80.00
-
€96.00
-
€86.67
-
PR NF EN 1594, NF EN 1594 (E) Prépublié/Prepublished (11/2022)
Infrastructures gazières - Canalisation pour pression maximale de service supérieure à 16 bar - Prescriptions fonctionnelles
11/1/2022 - Paper - English, French - AFNOR
Learn More€148.00 -
PR NF EN ISO 5211/A1, E29-402/A1PR (11/2022)
Robinetterie industrielle - Raccordement des actionneurs à fraction de tour - Amendement 1
11/1/2022 - Paper - English, French - AFNOR
Learn More€62.60 -
PR NF EN ISO 5210/A1, E29-401/A1PR (11/2022)
Robinetterie industrielle - Raccordement des actionneurs multitours aux appareils de robinetterie - Amendement 1
11/1/2022 - Paper - English, French - AFNOR
Learn More€62.60 -
DIN EN 1594:2022-11
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements, German and English version prEN 1594:2022
11/1/2022 - PDF - English, German - DIN
Learn More€152.71 -
PR NF EN 13121-3, M88-557-3PR (11/2022)
Réservoirs et récipients en PRV pour applications hors sol - Partie 3 : Conception et fabrication
11/1/2022 - Paper - English, French - AFNOR
Learn More€237.50 -
NF EN ISO 28765, A91-128 (11/2022)
Emaux vitrifiés - Conception de réservoirs en acier boulonnés pour le stockage ou le traitement des eaux ou des effluents d'eaux usées urbains ou industriels
11/1/2022 - Paper - French - AFNOR
Learn More€99.33 -
DIN EN 13121-3:2022-11
GRP tanks and vessels for use above ground - Part 3: Design and workmanship, German and English version prEN 13121-3:2022
11/1/2022 - PDF - English, German - DIN
Learn More€322.52 -
NF EN 15969-2, M88-144-2 (11/2022)
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2 : Commercial and logistic data
11/1/2022 - Paper - French - AFNOR
Learn More€108.33 -
DIN EN 13922:2022-11
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels, German version EN 13922:2020+A1:2022
11/1/2022 - PDF - German - DIN
Learn More€99.35 -
DIN 2425-4:2022-11
Plans for Public Utilities, Water Resources and Long-distance Lines - Part 4: Drain and sewer systems outside buildings
11/1/2022 - PDF - German - DIN
Learn More€115.33 -
NF EN ISO 1179-2, E49-051-2 (11/2022)
Raccordements pour applications générales et transmissions hydrauliques et pneumatiques - Orifices et éléments mâles à filetage ISO 228-1 à joint en élastomère ou étanchéité métal sur métal - Partie 2 : éléments mâles de séries légère (série L) et lourde (série S) avec joint en élastomère (type E)
11/1/2022 - Paper - French - AFNOR
Learn More€60.67 -
BS ISO 12151-2:2022 + Redline
Tracked Changes. Connections for hydraulic fluid power and general use. Hose fittings with ISO 8434-1 24° cone connector ends O-rings
11/1/2022 - PDF - English - BSI
Learn More€235.00 -
VG 95925-2:2022-11
Hose assemblies - Part 2: For fluid power service - Part numbers, Text in German and English
11/1/2022 - PDF - English, German - DIN
Learn More€141.96 -
NF EN 12067-2, D36-391-2 (11/2022)
Gas/air ratio controls for gas burners and gas burning appliances - Part 2 : Electronic types
11/1/2022 - Paper - French - AFNOR
Learn More€144.67 -
ASTM A376/A376M-22
Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM A376/A376M-22 + Redline
Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
DIN EN 17476:2022-11
Specifications for dedicated liquefied petroleum gas appliances - LPG vapour pressure appliances incorporating a horizontal cartridge in the chassis, German version EN 17476:2021+A1:2022
11/1/2022 - PDF - German - DIN
Learn More€126.26 -
NF ISO 4405, E48-652 (11/2022)
Transmissions hydrauliques - Pollution des fluides - Détermination de la pollution particulaire par la méthode gravimétrique
11/1/2022 - Paper - French - AFNOR
Learn More€75.67 -
BS ISO 16889:2022 + Redline
Tracked Changes. Hydraulic fluid power. Filters. Multi-pass method for evaluating filtration performance of a filter element
11/1/2022 - PDF - English - BSI
Learn More€454.00 -
NF EN 1643, D36-380 (11/2022)
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Valve proving systems for automatic shut-off valves
11/1/2022 - Paper - French - AFNOR
Learn More€108.33 -
ASTM D2239-22
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM D2239-22 + Redline
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM D3035-22
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM D3035-22 + Redline
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM D2737-22
Standard Specification for Polyethylene (PE) Plastic Tubing
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM D2737-22 + Redline
Standard Specification for Polyethylene (PE) Plastic Tubing
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM F1412-22
Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1412-22 + Redline
Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
DIN EN ISO 15874-2:2022-11
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013 + Amd.1:2018 + Amd.2:2022), German and English version EN ISO 15874-2:2013 + A1:2018 + A2:2022
11/1/2022 - PDF - English, German - DIN
Learn More€131.96 -
ASTM A1109-22
Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM A1109-22 + Redline
Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM A860/A860M-22
Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM A860/A860M-22 + Redline
Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM A787/A787M-22
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM A787/A787M-22 + Redline
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
ASTM A403/A403M-22b
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
11/1/2022 - PDF - English - ASTM
Learn More€60.00 -
ASTM A403/A403M-22b + Redline
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
11/1/2022 - PDF - English - ASTM
Learn More€72.00 -
ASTM A420/A420M-22
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM A420/A420M-22 + Redline
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
VG 95920-2:2022-11
Hose assemblies - Hoses and hose fittings - Part 2: Standards for fluid power - Overview, Text in German and English
11/1/2022 - PDF - English, German - DIN
Learn More€104.95 -
BS EN 12952-5:2021
Water-tube boilers and auxiliary installations Workmanship construction of pressure parts the boiler
10/31/2022 - PDF - English - BSI
Learn More€398.00 -
BS EN 13799:2022
LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
10/31/2022 - PDF - English - BSI
Learn More€293.00 -
BS EN 13094:2020+A1:2022
Tanks for the transport of dangerous goods. Metallic gravity-discharge tanks. Design and construction
10/31/2022 - PDF - English - BSI
Learn More€377.00 -
BS EN 13922:2020+A1:2022
Tanks for transport of dangerous goods. Service equipment for tanks. Overfill prevention systems for liquid fuels
10/31/2022 - PDF - English - BSI
Learn More€293.00 -
BS EN 14525:2022
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
10/31/2022 - PDF - English - BSI
Learn More€293.00 -
BS EN 16304:2022
Automatic vent valves for gas burners and gas burning appliances
10/31/2022 - PDF - English - BSI
Learn More€331.00 -
BS EN ISO 13349-2:2022
Fans — Vocabulary and definitions of categories Part 2: Categories
10/31/2022 - PDF - English - BSI
Learn More€293.00 -
BS ISO 21009-1:2022
Cryogenic vessels — Static vacuum-insulated Part 1: Design, fabrication, inspection and tests
10/31/2022 - PDF - English - BSI
Learn More€449.00 -
BS ISO 16889:2022
Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element
10/31/2022 - PDF - English - BSI
Learn More€348.00 -
PD CEN ISO/TS 23818-2:2022
Assessment of conformity plastics piping systems for the rehabilitation existing pipelines Resin-fibre composite (RFC) material
10/31/2022 - PDF - English - BSI
Learn More€293.00 -
PD CEN ISO/TS 23818-3:2022
Assessment of conformity plastics piping systems for the rehabilitation existing pipelines Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material
10/31/2022 - PDF - English - BSI
Learn More€293.00 -
22/30449831 DC:2022
BS ISO 21360-5. Vacuum technology. Standard methods for measuring vacuum-pump performance Part 5. NEG vacuum pumps
10/31/2022 - PDF - English - BSI
Learn More€24.00 -
NBN EN 15969-1:2022
Citernes destinées au transport de matières dangereuses - Interface numérique pour le transfert de données entre des véhicules-citernes et des installations fixes - Partie 1 : Spécifications du protocole - Contrôle, données de mesure et d’événements
10/28/2022 - PDF - French - NBN
Learn More€205.00 -
NBN EN 15969-1:2022
Tanks für die Beförderung gefährlicher Güter - Digitale Schnittstelle für den Datenaustausch zwischen Tankfahrzeugen und stationären Einrichtungen - Teil 1: Protokollspezifikation - Steuerungs-, Mess- und Ereignisdaten
10/28/2022 - PDF - German - NBN
Learn More€205.00 -
NBN EN 15969-1:2022
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data
10/28/2022 - PDF - English - NBN
Learn More€205.00 -
BS EN 15714-3:2022
Industrial valves. Actuators Pneumatic part-turn actuators for industrial Basic requirements
10/28/2022 - PDF - English - BSI
Learn More€293.00 -
BS EN 14525:2022 + Redline
Tracked Changes. Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
10/28/2022 - PDF - English - BSI
Learn More€382.00 -
BS ISO 12151-2:2022
Connections for hydraulic fluid power and general use — Hose fittings Part 2: with ISO 8434-1 24° cone connector ends O-rings
10/27/2022 - PDF - English - BSI
Learn More€180.00 -
UNE-EN ISO 22434:2022
Gas cylinders - Inspection and maintenance of valves (ISO 22434:2022)
10/26/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 22434:2022
Gas cylinders - Inspection and maintenance of valves (ISO 22434:2022)
10/26/2022 - PDF - English - AENOR
Learn More€72.00 -
SAE AS 85421/3D:2022-10-26
FITTING, TEE, REDUCER, BEAM SEAL, 3000/4000 PSI, 3 MALE ENDS
10/26/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 85421/4F:2022-10-26
FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN, SWIVEL NUT ON BRANCH
10/26/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 85421/5D:2022-10-26
FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN AND BRANCH, SWIVEL NUT ON RUN
10/26/2022 - PDF - English - SAE
Learn More€47.00 -
BS EN ISO 15493:2003+A1:2017
Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and the system. Metric series
10/25/2022 - PDF - English - BSI
Learn More€377.00 -
NBN EN 15714-3:2022
Robinetterie industrielle - Actionneurs - Partie 3 : Actionneurs pneumatiques à fraction de tour pour robinetterie industrielle - Prescriptions de base
10/20/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN 15714-3:2022
Industriearmaturen - Antriebe - Teil 3: Pneumatische Schwenkantriebe für Industriearmaturen - Grundanforderungen
10/20/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN 15714-6:2022
Robinetterie industrielle - Actionneurs - Partie 6 : Actionneurs linéaires hydrauliques - Prescriptions de base
10/20/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN 15714-6:2022
Industriearmaturen - Stellantriebe - Teil 6: Hydraulische Linearantriebe - Grundlegende Anforderungen
10/20/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN 15714-3:2022
Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements
10/20/2022 - PDF - English - NBN
Learn More€142.00 -
NBN EN 15714-6:2022
Industrial valves - Actuators - Part 6: Hydraulic linear actuators for industrial valves - Basic requirements
10/20/2022 - PDF - English - NBN
Learn More€142.00 -
NBN EN ISO 13349-1:2022
Ventilateurs - Vocabulaire et définitions des catégories - Partie 1: Vocabulaire (ISO 13349-1:2022)
10/20/2022 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 13349-2:2022
Ventilateurs - Vocabulaire et définitions des catégories - Partie 2: Catégories (ISO 13349-2:2022)
10/20/2022 - PDF - French - NBN
Learn More€121.00 -
NBN EN ISO 13349-1:2022
Ventilatoren - Terminologie und Klassifizierung - Teil 1: Terminologie (ISO 13349-1:2022)
10/20/2022 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 13349-2:2022
Ventilatoren - Terminologie und Klassifizierung - Teil 2: Klassifizierung (ISO 13349-2:2022)
10/20/2022 - PDF - German - NBN
Learn More€121.00 -
NBN EN ISO 13349-1:2022
Fans - Vocabulary and definitions of categories - Part 1: Vocabulary (ISO 13349-1:2022)
10/20/2022 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 13349-2:2022
Fans - Vocabulary and definitions of categories - Part 2: Categories (ISO 13349-2:2022)
10/20/2022 - PDF - English - NBN
Learn More€121.00 -
€24.00
-
22/30461255 DC:2022
BS ISO 11119-2:2020 AMD1. Gas cylinders. Design, construction and testing of refillable composite gas cylinders tubes Part 2. Fully wrapped fibre reinforced up to 450 l with load-sharing metal liners
10/19/2022 - PDF - English - BSI
Learn More€24.00 -
22/30461258 DC:2022
BS ISO 11119-3:2020 AMD1. Gas cylinders. Design, construction and testing of refillable composite gas cylinders tubes Part 3. Fully wrapped fibre reinforced up to 450 l with non-load-sharing metallic or non-metallic liners without
10/19/2022 - PDF - English - BSI
Learn More€24.00 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - English - AENOR
Learn More€88.80 -
22/30409922 DC:2022
BS ISO 4706. Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below
10/17/2022 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with a rigidly anchored plastics inner layer
10/17/2022 - PDF - English - BSI
Learn More€293.00 -
NBN EN ISO 23632:2022
Robinetterie industrielle - Essais de validation de la conception des appareils de robinetterie (ISO 23632:2021)
10/13/2022 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 23632:2022
Industriearmaturen - Validierungsprüfung der Konstruktion von Armaturen (ISO 23632:2021)
10/13/2022 - PDF - German - NBN
Learn More€89.00 -
NBN EN 13799:2022
Equipements pour GPL et leurs accessoires - Jauges de niveau pour les réservoirs de gaz de pétrole liquéfié (GPL)
10/13/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN 13799:2022
Flüssiggas-Geräte und Ausrüstungsteile - Füllstandsanzeiger für Druckbehälter für Flüssiggas (LPG)
10/13/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN 13799:2022
LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
10/13/2022 - PDF - English - NBN
Learn More€142.00 -
NBN EN ISO 23632:2022
Industrial valves - Design validation-testing of valves (ISO 23632:2021)
10/13/2022 - PDF - English - NBN
Learn More€89.00 -
NBN EN 161:2022
Robinets automatiques de sectionnement pour brûleurs à gaz et appareils à gaz
10/13/2022 - PDF - French - NBN
Learn More€184.00 -
€184.00
-
NBN EN 161:2022
Automatic shut-off valves for gas burners and gas appliances
10/13/2022 - PDF - English - NBN
Learn More€184.00 -
NBN EN 12889:2022
Mise en oeuvre sans tranchée et essais des branchements et collecteurs d'assainissement
10/13/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN 12889:2022
Grabenlose Verlegung und Prüfung von Abwasserleitungen und -kanälen
10/13/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN 12889:2022
Trenchless construction and testing of drains and sewers
10/13/2022 - PDF - English - NBN
Learn More€142.00 -
NBN EN 16678:2022
Équipements auxiliaires pour brûleurs à gaz et appareils à gaz - Robinets automatiques de sectionnement pour pression de service supérieure à 500 kPa et inférieure ou égale à 6300 kPa
10/13/2022 - PDF - French - NBN
Learn More€163.00 -
NBN EN 16304:2022
Robinets d'évent automatiques pour brûleurs à gaz et appareils à gaz
10/13/2022 - PDF - French - NBN
Learn More€163.00 -
NBN EN 88-2:2022
Dispositifs de sécurité et de contrôle pour les brûleurs à gaz et appareils utilisant des combustibles gazeux - Partie 2 : Régulateurs de pression pour pressions amont comprises entre 50 kPa et 500 kPa
10/13/2022 - PDF - French - NBN
Learn More€184.00 -
NBN EN 88-3:2022
Dispositifs de sécurité et de contrôle pour les brûleurs à gaz et appareils utilisant des combustibles gazeux - Partie 3 : Régulateurs de pression et/ou de débit de type électronique pour pression amont inférieure ou égale à 500 kPa
10/13/2022 - PDF - French - NBN
Learn More€163.00 -
NBN EN 16678:2022
Sicherheits- und Regeleinrichtungen für Gasbrenner und Gasbrennstoffgeräte - Automatische Absperrventile für einen Betriebsdruck über 500 kPa bis einschließlich 6 300 kPa
10/13/2022 - PDF - German - NBN
Learn More€163.00 -
€163.00
-
NBN EN 88-2:2022
Sicherheits- und Regeleinrichtungen für Gasbrenner und Gasgeräte - Teil 2: Druckregler für Eingangsdrücke über 50 kPa bis einschließlich 500 kPa
10/13/2022 - PDF - German - NBN
Learn More€184.00 -
NBN EN 88-3:2022
Sicherheits- und Regeleinrichtungen für Gasbrenner und Gasgeräte - Teil 3: Druck- und/oder Durchflussregler für Eingangsdrücke bis einschließlich 500 kPa, elektronische Ausführung
10/13/2022 - PDF - German - NBN
Learn More€163.00 -
NBN EN 16678:2022
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
10/13/2022 - PDF - English - NBN
Learn More€163.00 -
NBN EN 16304:2022
Automatic vent valves for gas burners and gas burning appliances
10/13/2022 - PDF - English - NBN
Learn More€163.00 -
NBN EN 88-2:2022
Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
10/13/2022 - PDF - English - NBN
Learn More€184.00 -
NBN EN 88-3:2022
Safety and control devices for gas burners and gas burning appliances - Part 3: Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types
10/13/2022 - PDF - English - NBN
Learn More€163.00 -
NBN EN 17176-2:2019+A1:2022
Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
10/13/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN 17176-2:2019+A1:2022
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für erdverlegte und nicht erdverlegte Entwässerungs-, Abwasser- und Bewässerungsdruckleitungen - Orientiertes weichmacherfreies Polyvinylchlorid (PVC-O) - Teil 2: Rohre - Änderung 1
10/13/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 9: Tubage par coffrage plastique interne rigidement ancré (ISO 11296-9:2022)
10/13/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) - Teil 9: Lining mit einer fest verankerten Kunststoffauskleidung (ISO 11296-9:2022)
10/13/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN 17176-2:2019+A1:2022
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
10/13/2022 - PDF - English - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
10/13/2022 - PDF - English - NBN
Learn More€142.00 -
NBN EN 13483:2022
Tuyaux et assemblages flexibles à récupération interne de vapeur pour systèmes de livraison mesurée de carburant - Spécification
10/13/2022 - PDF - French - NBN
Learn More€163.00 -
NBN EN 13483:2022
Gummi- und Kunststoffschläuche und -schlauchleitungen mit innenliegender Gasrückführung für Zapfsäulen an Tankstellen - Anforderungen
10/13/2022 - PDF - German - NBN
Learn More€163.00 -
NBN EN 13483:2022
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
10/13/2022 - PDF - English - NBN
Learn More€163.00 -
UNE-CEN/TS 17152-3:2022
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme (Endorsed by Asociación Española de Normalización in January of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€64.00 -
UNE-EN 13480-3:2017/A5:2022
Metallic industrial piping - Part 3: Design and calculation (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 15969-2:2022
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data (Endorsed by Asociación Española de Normalización in December of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€83.00 -
UNE-EN 15969-1:2022
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data (Endorsed by Asociación Española de Normalización in December of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€142.00 -
UNE-CEN/TR 15120:2022
Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading (Endorsed by Asociación Española de Normalización in November of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€89.00 -
UNE-CEN/TS 14541-2:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 2: Recommendations for relevant characteristics (Endorsed by Asociación Española de Normalización in July of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€65.00 -
UNE-CEN ISO/TS 23818-2:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-CEN ISO/TS 23818-3:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material (ISO/TS 23818-3:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€68.00 -
UNE-CEN ISO/TS 23818-1:2020
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 1: Polyethylene (PE) material (ISO/TS 23818-1:2020) (Endorsed by Asociación Española de Normalización in October of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€95.00 -
UNE-EN ISO 11295:2022
Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022)
10/11/2022 - PDF - Spanish - AENOR
Learn More€126.00 -
UNE-EN ISO 11295:2022
Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022)
10/11/2022 - PDF - English - AENOR
Learn More€151.20 -
UNE-EN ISO 3501:2022
Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force (ISO 3501:2021)
10/11/2022 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 3501:2022
Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force (ISO 3501:2021)
10/11/2022 - PDF - English - AENOR
Learn More€68.40 -
NBN EN 1852-1:2018+A1:2022
Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Polypropylène (PP) - Partie 1: Spécifications pour tubes, raccords et le système
10/6/2022 - PDF - French - NBN
Learn More€163.00 -
NBN EN 1852-1:2018+A1:2022
Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen - Polypropylen (PP) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
10/6/2022 - PDF - German - NBN
Learn More€163.00 -
NBN EN 1852-1:2018+A1:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
10/6/2022 - PDF - English - NBN
Learn More€163.00 -
NBN EN 14525:2022
Manchons et adaptateurs de brides à larges tolérances en fonte ductile et acier destinés à être utilisés avec des tuyaux faits de différents matériaux : fonte ductile, fonte grise, acier, PVC-U, PVC-O, PE, fibre-ciment
10/6/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN 14525:2022
Großbereichskupplungen und Flanschadapter aus duktilem Gusseisen und Stahl zur Verbindung von Rohren aus unterschiedlichen Werkstoffen: duktiles Gusseisen, Grauguss, Stahl, PVC-U, PVC-O, PE, Faserzement
10/6/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN 14525:2022
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
10/6/2022 - PDF - English - NBN
Learn More€142.00 -
UNE-EN 13433:2022
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A
10/5/2022 - PDF - Spanish - AENOR
Learn More€73.00 -
UNE-EN 13433:2022
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A
10/5/2022 - PDF - English - AENOR
Learn More€87.60 -
UNE-EN 13434:2022
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, flow actuated - Family G, Type B
10/5/2022 - PDF - Spanish - AENOR
Learn More€73.00 -
UNE-EN 13434:2022
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, flow actuated - Family G, Type B
10/5/2022 - PDF - English - AENOR
Learn More€87.60 -
UNE-EN 1515-4:2021/AC:2022
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
10/5/2022 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 1515-4:2021/AC:2022
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
10/5/2022 - PDF - English - AENOR
Learn More€0.00 -
NF ISO 15086-3, E48-392-3 (10/2022)
Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 3 : Measurement of hydraulic impedance
10/1/2022 - Paper - French - AFNOR
Learn More€86.67 -
NF EN 14525, A48-881 (10/2022)
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials : ductile iron, Grey iron, Steel, PVC-U, PE, Fibre-cement
10/1/2022 - Paper - French - AFNOR
Learn More€99.33 -
NF EN 15714-6, E29-403-6 (10/2022)
Robinetterie industrielle - Actionneurs - Partie 6 : actionneurs linéaires hydrauliques - Prescriptions de base
10/1/2022 - Paper - French - AFNOR
Learn More€86.67 -
NF EN 15714-3, E29-403-3 (10/2022)
Robinetterie industrielle - Actionneurs - Partie 3 : actionneurs pneumatiques à fraction de tour pour robinetterie industrielle - Prescriptions de base
10/1/2022 - Paper - French - AFNOR
Learn More€86.67 -
NF EN ISO 23632, E29-386 (10/2022)
Robinetterie industrielle - Essais de validation de la conception des appareils de robinetterie
10/1/2022 - Paper - French - AFNOR
Learn More€75.67 -
ASTM B1020/B1020M-22
Standard Specification for Seamless Nickel Alloy Mechanical Tubing and Hollow Bar
10/1/2022 - PDF - English - ASTM
Learn More€60.00 -
ASTM B1020/B1020M-22 + Redline
Standard Specification for Seamless Nickel Alloy Mechanical Tubing and Hollow Bar
10/1/2022 - PDF - English - ASTM
Learn More€72.00 -
DIN EN 877:2022-10
Cast iron pipes systems and their components for the evacuation of water from works - Characteristics and test methods, German version EN 877:2021
10/1/2022 - PDF - German - DIN
Learn More€136.82 -
DIN EN ISO 15874-1:2022-10
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013 + Amd 1:2022), German and English version EN ISO 15874-1:2013 + A1:2022
10/1/2022 - PDF - English, German - DIN
Learn More€85.79