23 : Fluid systems and components for general use
-
BS 5422:2023
Thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range –40 °C to +700 °C. Method for specifying
6/30/2023 - PDF - English - BSI
Learn More€377.00 -
PD CEN/TS 14632:2023
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
6/30/2023 - PDF - English - BSI
Learn More€293.00 -
BS EN 12449:2023
Copper and copper alloys. Seamless, round tubes for general purposes
6/30/2023 - PDF - English - BSI
Learn More€348.00 -
BS ISO 9854-1:2023
Thermoplastics pipes for the transport of fluids. Determination Charpy impact properties General test method
6/30/2023 - PDF - English - BSI
Learn More€180.00 -
CEN/TS 14632:2023
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity
6/29/2023 - PDF - English - NBN
Learn More€163.00 -
CEN/TS 14632:2023
Kunststoff-Rohrleitungssysteme für Wasserversorgung, Entwässerungssysteme und Abwasserleitungen mit und ohne Druck - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf der Basis von ungesättigtem Polyesterharz (UP) - Empfehlungen für die Beurteilung der Konformität
6/29/2023 - PDF - German - NBN
Learn More€163.00 -
UNE-EN 13483:2023
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
6/28/2023 - PDF - Spanish - AENOR
Learn More€82.00 -
UNE-EN 13483:2023
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
6/28/2023 - PDF - English - AENOR
Learn More€98.40 -
PD IEC PAS 63086-3-1:2023
Household and similar electrical air cleaning appliances. Methods for measuring the performance Method assessing reduction rate of key bioaerosols by portable cleaners using an aerobiology test chamber
6/26/2023 - PDF - English - BSI
Learn More€250.00 -
23/30476020 DC:2023
BS ISO 4437-2.2. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Part 2. Pipes
6/26/2023 - PDF - English - BSI
Learn More€24.00 -
23/30476022 DC:2023
BS ISO 4437-5.2. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Part 5. Fitness purpose system
6/26/2023 - PDF - English - BSI
Learn More€24.00 -
23/30475953 DC:2023
BS EN 17878-3. District heating pipes. Factory made flexible pipe systems with a lower temperature profile Part 3. Non bonded system plastic service requirements and test methods
6/23/2023 - PDF - English - BSI
Learn More€24.00 -
22/30443545 DC:2023
BS EN 17878-3. District heating pipes. Flexible pipe systems with a lower temperature profile Part 3. Non bonded system plastic service requirements and test methods
6/22/2023 - PDF - English - BSI
Learn More€24.00 -
21/30404788 DC:2023
BS ISO 4437-3. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Part 3. Fittings
6/22/2023 - PDF - English - BSI
Learn More€24.00 -
21/30404791 DC:2023
BS ISO 4437-5. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Part 5. Fitness purpose system
6/22/2023 - PDF - English - BSI
Learn More€24.00 -
NBN ISO 24131-1:2023
Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 1: Polyurethane lining ISO 24131-1:2023
6/21/2023 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 24131-2:2023
Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 2: Epoxy lining ISO 24131-2:2023
6/21/2023 - PDF - English - NBN
Learn More€89.00 -
21/30404785 DC:2023
BS ISO 4437-2. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Part 2. Pipes
6/21/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 14758-1:2023
Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD) Specifications pipes, fittings the system
6/13/2023 - PDF - English - BSI
Learn More€331.00 -
23/30457723 DC:2023
BS EN ISO 21009-2. Cryogenic vessels. Static vacuum insulated vessels Part 2. Operational requirements
6/13/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 14841:2023 + Redline
Tracked Changes. LPG equipment and accessories. Filling and discharge procedures for LPG rail tankers
6/12/2023 - PDF - English - BSI
Learn More€235.00 -
23/30475416 DC:2023
BS EN 17878-2. District heating pipes. Factory made flexible pipe systems with a lower temperature profile Part 2. Bonded system plastic service pipes, requirements and test methods
6/12/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 1566-1:2022 + Redline
Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Specifications pipes, fittings system
6/8/2023 - PDF - English - BSI
Learn More€432.00 -
22/30443548 DC:2023
BS EN 17878-2. District heating pipes. Factory made flexible pipe systems with a lower temperature profile Part 2. Bonded system plastic service requirements and test methods
6/8/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 5774:2023 + Redline
Tracked Changes. Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
6/8/2023 - PDF - English - BSI
Learn More€235.00 -
BS EN 14841:2023
LPG equipment and accessories. Filling and discharge procedures for LPG rail tankers
6/7/2023 - PDF - English - BSI
Learn More€180.00 -
UNE-EN ISO 10298:2021/A1:2023
Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets - Amendment 1 (ISO 10298:2018/Amd 1:2021)
6/7/2023 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10298:2021/A1:2023
Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets - Amendment 1 (ISO 10298:2018/Amd 1:2021)
6/7/2023 - PDF - English - AENOR
Learn More€40.80 -
23/30461309 DC:2023
BS ISO 16132. Ductile iron pipes and fittings. Seal coats for cement mortar linings
6/7/2023 - PDF - English - BSI
Learn More€24.00 -
UNE-EN ISO 13349-1:2023
Fans - Vocabulary and definitions of categories - Part 1: Vocabulary (ISO 13349-1:2022
6/7/2023 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 13349-1:2023
Fans - Vocabulary and definitions of categories - Part 1: Vocabulary (ISO 13349-1:2022
6/7/2023 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 13349-2:2023
Fans - Vocabulary and definitions of categories - Part 2: Categories (ISO 13349-2:2022)
6/7/2023 - PDF - Spanish - AENOR
Learn More€76.00 -
UNE-EN ISO 13349-2:2023
Fans - Vocabulary and definitions of categories - Part 2: Categories (ISO 13349-2:2022)
6/7/2023 - PDF - English - AENOR
Learn More€91.20 -
23/30457720 DC:2023
BS ISO 21013-1 AMD 1. Cryogenic vessels. Pressure-relief accessories for cryogenic service Part Reclosable pressure-relief valves
6/6/2023 - PDF - English - BSI
Learn More€24.00 -
BS ISO 23949:2023
Plastics. Application of spread of flame test to plastic pipes
6/6/2023 - PDF - English - BSI
Learn More€180.00 -
23/30471569 DC:2023
BS EN 12953-6. Shell Boilers Part 6. Requirements for equipment the boiler
6/5/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 161:2022 + Redline
Tracked Changes. Automatic shut-off valves for gas burners and gas appliances
6/5/2023 - PDF - English - BSI
Learn More€492.00 -
BS EN 88-2:2022 + Redline
Tracked Changes. Safety and control devices for gas burners burning appliances Pressure regulators inlet pressures above 50 kPa up to including 500
6/5/2023 - PDF - English - BSI
Learn More€454.00 -
BS EN ISO 5774:2023
Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
6/5/2023 - PDF - English - BSI
Learn More€180.00 -
UNE-CEN/TR 17924:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Guidance on hydrogen specific aspects (Endorsed by Asociación Española de Normalización in June of 2023.)
6/3/2023 - PDF - English - AENOR
Learn More€110.00 -
BS EN 15112:2022 + Redline
Tracked Changes. External cathodic protection of well casings
6/2/2023 - PDF - English - BSI
Learn More€382.00 -
DIN EN 17152-1:2023-06
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 1: Specifications for storm water boxes made of PP and PVC-U, German version EN 17152-1:2019 + AC:2020
6/1/2023 - PDF - German - DIN
Learn More€85.79 -
PR NF EN 17928-2, M50-035-2PR (06/2023)
Infrastructures gazières - Stations d'injection - Partie 2 : exigences spécifiques concernant l'injection de biométhane
6/1/2023 - Paper - English, French - AFNOR
Learn More€56.00 -
23/30471506 DC:2023
BS EN 1717. Protection against pollution of water intended for human consumption in potable water installations and general requirements for devices to prevent pollution by backflow
6/1/2023 - PDF - English - BSI
Learn More€24.00 -
PR NF EN 12007-5, M50-005-5PR (06/2023)
Infrastructures gazières - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 5 : Branchements - Recommandations fonctionnelles spécifiques
6/1/2023 - Paper - English, French - AFNOR
Learn More€107.50 -
PR NF EN 17928-1, M50-035-1PR (06/2023)
Infrastructures gazières - Stations d'injection - Partie 1 : Exigences générales
6/1/2023 - Paper - English, French - AFNOR
Learn More€138.50 -
PR NF EN 17928-3, M50-035-3PR (06/2023)
Infrastructures gazières - Stations d'injection - Partie 3 : exigences spécifiques concernant l'injection de gaz combustible hydrogène
6/1/2023 - Paper - English, French - AFNOR
Learn More€64.50 -
DIN 4034-1:2023-06
Prefabricated concrete manholes, unreinforced, steel fibre and reinforced - Part 1: Requirements, test methods and marking for drains and sewers in addition to DIN EN 1917:2003-04
6/1/2023 - PDF - German - DIN
Learn More€115.33 -
DIN 4034-101:2023-06
Prefabricated concrete manholes, unreinforced, steel fibre and reinforced - Part 101: Evaluation of conformity for drains and sewers in addition to DIN EN 1917:2003-04
6/1/2023 - PDF - German - DIN
Learn More€39.35 -
NBN EN 14841:2023
Équipements pour GPL et leurs accessoires - Procédures de chargement et déchargement des wagons-citernes pour GPL
6/1/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN 14841:2023
Flüssiggas-Geräte und Ausrüstungsteile - Füll- und Entleerungsverfahren für Eisenbahnkesselwagen für Flüssiggas (LPG)
6/1/2023 - PDF - German - NBN
Learn More€58.00 -
NBN EN 14841:2023
LPG equipment and accessories - Filling and discharge procedures for LPG rail tankers
6/1/2023 - PDF - English - NBN
Learn More€58.00 -
NF ISO 16028, E48-056 (06/2023)
Transmissions hydrauliques - Dimensions et exigences des raccords rapides de type à face plane
6/1/2023 - Paper - French - AFNOR
Learn More€48.00 -
AD 2000-Merkblatt W 2:2023-06
Materials for pressure vessels - Austenitic and austenitic-ferritic steels
6/1/2023 - PDF - English - VDTUV
Learn More€38.88 -
DIN EN 13322-1:2023-06
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel, German and English version prEN 13322-1:2023
6/1/2023 - PDF - English, German - DIN
Learn More€115.33 -
PR NF EN 10216-2, A49-200-2PR (06/2023)
Tubes sans soudure en acier pour service sous pression - Conditions techniques de livraison - Partie 2: Tubes en acier non allié et allié avec caractéristiques spécifiées à température élevée
6/1/2023 - Paper - English, French - AFNOR
Learn More€125.00 -
PR NF EN 17970, A48-970PR (06/2023)
Tuyaux en fonte ductile - Assemblages automatiques pour systèmes de tuyaux en fonte ductile - Résistance à la pénétration des racines - Exigences et méthodes d'essai
6/1/2023 - Paper - English, French - AFNOR
Learn More€56.00 -
PR NF EN ISO 18119/A2, E29-755/A2PR (06/2023)
Bouteilles à gaz - Bouteilles et tubes à gaz en acier et en alliages d'aluminium, sans soudure - Contrôles et essais périodiques - Amendement 2
6/1/2023 - Paper - English, French - AFNOR
Learn More€45.00 -
PR NF EN 60335-2-65/AC, C73-865/ACPR (06/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-65 : Règles particulières pour les épurateurs d'air
6/1/2023 - Paper - English, French - AFNOR
Learn More€56.00 -
PR NF EN IEC 60335-2-40/AA, C73-840/AAPR (06/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-40 : règles particulières pour les pompes à chaleur électriques, les climatiseurs et les déshumidificateurs
6/1/2023 - Paper - English, French - AFNOR
Learn More€88.50 -
PR NF ISO 12759-6, E51-101-6PR (06/2023)
Ventilateurs - Classification du rendement des ventilateurs - Partie 6 : calcul de l'indice énergétique des ventilateurs
6/1/2023 - Paper - English, French - AFNOR
Learn More€125.00 -
PR NF EN IEC 60335-2-40, C73-840PR (06/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-40 : règles particulières pour les pompes à chaleur électriques, les climatiseurs et les déshumidificateurs
6/1/2023 - Paper - French - AFNOR
Learn More€153.50 -
PR NF EN ISO 18623-1, E51-290-1PR (06/2023)
Compresseurs à air et systèmes à air comprimé - Partie 1 : Exigences de sécurité des compresseurs à air
6/1/2023 - Paper - English, French - AFNOR
Learn More€125.00 -
NF EN IEC 60534-1, C46-502 (06/2023)
Industrial-process control valves - Part 1 : Control valve terminology and general considerations
6/1/2023 - Paper - French - AFNOR
Learn More€65.00 -
DIN EN 1329-1:2023-06
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system, German version EN 1329-1:2020
6/1/2023 - PDF - German - DIN
Learn More€115.33 -
NF EN 14870-4, M87-245-4 (06/2023)
Industries du pétrole et du gaz naturel - Coudes d'induction, raccords et brides pour systèmes de transport par conduites - Partie 4 : Coudes fabriqués à froid en usine
6/1/2023 - Paper - French - AFNOR
Learn More€99.33 -
DIN EN ISO 6224:2023-06
Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO/DIS 6224:2023), German and English version prEN ISO 6224:2023
6/1/2023 - PDF - English, German - DIN
Learn More€65.89 -
DIN EN ISO 4641:2023-06
Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO/DIS 4641:2023), German and English version prEN ISO 4641:2023
6/1/2023 - PDF - English, German - DIN
Learn More€72.80 -
23/30446502 DC:2023
BS EN ISO 4641. Rubber hoses and hose assemblies for water suction and discharge. Specification
6/1/2023 - PDF - English - BSI
Learn More€24.00 -
PR NF EN ISO 5771, T47-256PR (06/2023)
Tuyaux et flexibles en caoutchouc pour le transfert d'ammoniac anhydre - Spécifications
6/1/2023 - Paper - English, French - AFNOR
Learn More€80.50 -
ASTM C1681-23
Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
6/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM C1681-23 + Redline
Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
6/1/2023 - PDF - English - ASTM
Learn More€65.00 -
ASTM D7800/D7800M-23
Standard Test Method for Determination of Elemental Sulfur in Natural Gas
6/1/2023 - PDF - English - ASTM
Learn More€66.00 -
ASTM D7800/D7800M-23 + Redline
Standard Test Method for Determination of Elemental Sulfur in Natural Gas
6/1/2023 - PDF - English - ASTM
Learn More€79.00 -
IEC PAS 63086-3-1:2023
IEC PAS 63086-3-1:2023 Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 3-1: Method for assessing the reduction rate of key bioaerosols by portable air cleaners using an aerobiology test chamber
5/30/2023 - PDF - English - IEC
Learn More€219.00 -
UNE-EN 10357:2023
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
5/24/2023 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 10357:2023
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
5/24/2023 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 14511-1:2023
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 1: Terms and definitions
5/24/2023 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 14511-1:2023
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 1: Terms and definitions
5/24/2023 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 14511-2:2023
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 2: Test conditions
5/24/2023 - PDF - Spanish - AENOR
Learn More€69.00 -
UNE-EN 14511-2:2023
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 2: Test conditions
5/24/2023 - PDF - English - AENOR
Learn More€82.80 -
UNE-EN 14511-3:2023
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 3: Test methods
5/24/2023 - PDF - Spanish - AENOR
Learn More€128.00 -
UNE-EN 14511-3:2023
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 3: Test methods
5/24/2023 - PDF - English - AENOR
Learn More€153.60 -
UNE-EN 14511-4:2023
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 4: Requirements
5/24/2023 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN 14511-4:2023
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 4: Requirements
5/24/2023 - PDF - English - AENOR
Learn More€75.60 -
23/30431818 DC:2023
BS ISO 24660. Fans. Determination of airflow propelled through an open personnel door by a positive pressure ventilator
5/24/2023 - PDF - English - BSI
Learn More€24.00 -
€75.00
-
IEC 60534-1:2023
IEC 60534-1:2023 Industrial-process control valves - Part 1: Control valve terminology and general considerations
5/23/2023 - PDF - English, French - IEC
Learn More€92.00 -
IEC 60534-1:2023 + Redline
IEC 60534-1:2023 (Redline version) Industrial-process control valves - Part 1: Control valve terminology and general considerations
5/23/2023 - PDF - English - IEC
Learn More€120.00 -
BS ISO 161-1:2018+A1:2023
Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures Metric series
5/23/2023 - PDF - English - BSI
Learn More€151.00 -
BS EN 1401-1:2019+A1:2023
Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications pipes, fittings the system
5/19/2023 - PDF - English - BSI
Learn More€331.00 -
UNE-EN 13922:2020+A1:2023
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels
5/17/2023 - PDF - Spanish - AENOR
Learn More€78.00 -
UNE-EN 13922:2020+A1:2023
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels
5/17/2023 - PDF - English - AENOR
Learn More€93.60 -
BS ISO 8639:2023 + Redline
Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and proof of structural design of flexible joints
5/17/2023 - PDF - English - BSI
Learn More€235.00 -
23/30473814 DC:2023
BS EN 13322-1. Transportable gas cylinders. Refillable welded steel Design and construction Part 1. Carbon
5/16/2023 - PDF - English - BSI
Learn More€24.00 -
BS ISO 8639:2023
Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leak tightness and proof of structural design of flexible joints
5/16/2023 - PDF - English - BSI
Learn More€180.00 -
23/30446514 DC:2023
BS EN ISO 6224. Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
5/16/2023 - PDF - English - BSI
Learn More€24.00 -
€60.00
-
SAE J 1926/3:2023-05-10
Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 3: Light-Duty (L-Series) Stud Ends
5/10/2023 - PDF - English - SAE
Learn More€93.00 -
UNE-EN 14420-2:2023
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
5/10/2023 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN 14420-2:2023
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
5/10/2023 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN 14420-4:2023
Hose fittings with clamp units - Part 4: Flange connections
5/10/2023 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 14420-4:2023
Hose fittings with clamp units - Part 4: Flange connections
5/10/2023 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 14420-7:2023
Hose fittings with clamp units - Part 7: Cam locking couplings
5/10/2023 - PDF - Spanish - AENOR
Learn More€73.00 -
UNE-EN 14420-7:2023
Hose fittings with clamp units - Part 7: Cam locking couplings
5/10/2023 - PDF - English - AENOR
Learn More€87.60 -
23/30463853 DC:2023
BS EN ISO 18623-1. Air compressors and compressed air systems Part 1. compressor safety requirements
5/4/2023 - PDF - English - BSI
Learn More€24.00 -
NBN EN ISO 5774:2023
Tuyaux en plastique - Types armés de textile pour applications avec de l'air comprimé - Spécifications (ISO 5774:2023)
5/4/2023 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 5774:2023
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
5/4/2023 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 5774:2023
Kunststoffschläuche - Textilverstärkte Typen für Druckluftanwendungen - Anforderung (ISO 5774:2023)
5/4/2023 - PDF - German - NBN
Learn More€89.00 -
NBN EN 549:2019+A1:2023
Matériaux à base de caoutchouc pour joints d'étanchéité et membranes destinés aux appareils à gaz et matériels pour le gaz
5/4/2023 - PDF - French - NBN
Learn More€142.00 -
NBN EN 549:2019+A1:2023
Elastomer-Werkstoffe für Dichtungen und Membranen in Gasgeräten und Gasanlagen
5/4/2023 - PDF - German - NBN
Learn More€142.00 -
NBN EN 549:2019+A1:2023
Rubber materials for seals and diaphragms for gas appliances and gas equipment
5/4/2023 - PDF - English - NBN
Learn More€142.00 -
23/30470623 DC:2023
BS EN ISO 18119 AMD 2. Gas cylinders. Seamless steel and seamless aluminium-alloy gas cylinders and tubes. Periodic inspection and testing
5/3/2023 - PDF - English - BSI
Learn More€24.00 -
PD CEN/TR 17924:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. Guidance on hydrogen specific aspects
5/2/2023 - PDF - English - BSI
Learn More€377.00 -
ASTM A961/A961M-23
Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
5/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM A961/A961M-23 + Redline
Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
5/1/2023 - PDF - English - ASTM
Learn More€65.00 -
SAE J 1341:2023-05-01
Test Method for Measuring Power Consumption of Hydraulic Pumps for Trucks and Buses (Stabilized: May 2023)
5/1/2023 - PDF - English - SAE
Learn More€60.00 -
ASTM A1119/A1119M-23a
Standard Specification for Welded Partially Corrugated Stainless Steel Tube for Potable Water and General Service
5/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM A1119/A1119M-23a + Redline
Standard Specification for Welded Partially Corrugated Stainless Steel Tube for Potable Water and General Service
5/1/2023 - PDF - English - ASTM
Learn More€65.00 -
NF EN 14841, M88-751 (05/2023)
Équipements pour GPL et leurs accessoires - Procédures de chargement et déchargement des wagons-citernes pour GPL
5/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
ASTM D5337-23
Standard Practice for Setting and Verifying the Flow Rate of Personal Sampling Pumps
5/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM D5337-23 + Redline
Standard Practice for Setting and Verifying the Flow Rate of Personal Sampling Pumps
5/1/2023 - PDF - English - ASTM
Learn More€65.00 -
DIN EN ISO 1179-2:2023-05
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022), German version EN ISO 1179-2:2022
5/1/2023 - PDF - German - DIN
Learn More€72.80 -
AD 2000-Merkblatt W 7/1:2023-05
Materials for pressure vessels - Fasteners - Bolts and nuts made from heat-treatable steels
5/1/2023 - PDF - German - VDTUV
Learn More€33.06 -
AD 2000-Merkblatt W 7/1:2023-05
Materials for pressure vessels - Fasteners - Bolts and nuts made from heat-treatable steels
5/1/2023 - PDF - English - VDTUV
Learn More€33.06 -
AD 2000-Merkblatt W 10:2023-05
Materials for pressure vessels - Materials for low temperatures - Ferrous materials
5/1/2023 - PDF - German - VDTUV
Learn More€26.16 -
AD 2000-Merkblatt W 10:2023-05
Materials for pressure vessels - Materials for low temperatures - Ferrous materials
5/1/2023 - PDF - English - VDTUV
Learn More€38.00 -
DIN EN 10216-2:2023-05
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties, German and English version prEN 10216-2:2023
5/1/2023 - PDF - English, German - DIN
Learn More€120.84 -
DIN EN 17970:2023-05
Ductile iron pipes - Push-in joints for ductile iron pipe systems - Resistance against root intrusion - Requirements and test methods, German and English version prEN 17970:2023
5/1/2023 - PDF - English, German - DIN
Learn More€65.89 -
DIN EN ISO 18119/A2:2023-05
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 2 (ISO 18119:2018/DAM 2:2023), German and English version EN ISO 18119:2018/prA2:2023
5/1/2023 - PDF - English, German - DIN
Learn More€39.35 -
PR NF EN ISO 22435, E29-699PR (05/2023)
Bouteilles à gaz - Robinets de bouteilles avec détendeur intégré - Spécifications et essais de type
5/1/2023 - Paper - English, French - AFNOR
Learn More€115.50 -
ASTM A335/A335M-23
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
5/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM A335/A335M-23 + Redline
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
5/1/2023 - PDF - English - ASTM
Learn More€72.00 -
ASTM A790/A790M-23
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
5/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM A790/A790M-23 + Redline
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
5/1/2023 - PDF - English - ASTM
Learn More€65.00 -
ASTM A213/A213M-23
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
5/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM A213/A213M-23 + Redline
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
5/1/2023 - PDF - English - ASTM
Learn More€72.00 -
NF EN IEC 60335-2-40, C73-840 (05/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-40 : exigences particulières pour les pompes à chaleur électriques, les climatiseurs et les déshumidificateurs
5/1/2023 - Paper - French - AFNOR
Learn More€219.33 -
NF EN IEC 60335-2-40/A11, C73-840/A11 (05/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-40 : exigences particulières pour les pompes à chaleur électriques, les climatiseurs et les déshumidificateurs
5/1/2023 - Paper - French - AFNOR
Learn More€88.33 -
DIN EN 12735-2:2023-05
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment, German and English version prEN 12735-2:2023
5/1/2023 - PDF - English, German - DIN
Learn More€92.62 -
PR NF EN 12735-2, A51-126-2PR (05/2023)
Cuivre et alliages de cuivre - Tubes ronds sans soudure pour l'air conditionné et la réfrigération - Partie 2 : Tubes pour le matériel
5/1/2023 - Paper - English, French - AFNOR
Learn More€97.50 -
PR NF EN 17962, P43-062PR (05/2023)
Robinets et raccords pour les bâtiments et dispositifs de protection contre la pollution par retour de l'eau potable - Éléments et corps en polymère sous pression interne et sans sollicitations externes
5/1/2023 - Paper - English, French - AFNOR
Learn More€64.50 -
NF EN IEC 60335-2-34, C73-834 (05/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-34 : exigences particulières pour les motocompresseurs
5/1/2023 - Paper - French - AFNOR
Learn More€141.33 -
NF EN IEC 60335-2-34/A11, C73-834/A11 (05/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-34 : exigences particulières pour les motocompresseurs
5/1/2023 - Paper - French - AFNOR
Learn More€54.67 -
DIN EN 12693:2023-05
Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors, German and English version prEN 12693:2023
5/1/2023 - PDF - English, German - DIN
Learn More€169.25 -
23/30429595 DC:2023
BS ISO 22484. Displacement and dynamic compressors. Performance test code for electric driven low-pressure air compressor packages
5/1/2023 - PDF - English - BSI
Learn More€24.00 -
ASTM A234/A234M-23a
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
5/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM A234/A234M-23a + Redline
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
5/1/2023 - PDF - English - ASTM
Learn More€65.00 -
ASTM A815/A815M-23
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
5/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM A815/A815M-23 + Redline
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
5/1/2023 - PDF - English - ASTM
Learn More€65.00 -
ASTM A960/A960M-23
Standard Specification for Common Requirements for Wrought Steel Piping Fittings
5/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM A960/A960M-23 + Redline
Standard Specification for Common Requirements for Wrought Steel Piping Fittings
5/1/2023 - PDF - English - ASTM
Learn More€65.00 -
ASTM A988/A988M-23
Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
5/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM A988/A988M-23 + Redline
Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
5/1/2023 - PDF - English - ASTM
Learn More€72.00 -
ASTM D5421-23
Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
5/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM D5421-23 + Redline
Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
5/1/2023 - PDF - English - ASTM
Learn More€65.00 -
NF EN ISO 5774, T47-254 (05/2023)
Tuyaux en plastique - Types armés de textile pour applications avec de l'air comprimé - Spécifications
5/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
DIN EN ISO 5771:2023-05
Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO/DIS 5771:2023), German and English version prEN ISO 5771:2023
5/1/2023 - PDF - English, German - DIN
Learn More€79.72 -
DIN EN ISO 6806:2023-05
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO/DIS 6806:2023), German and English version prEN ISO 6806:2023
5/1/2023 - PDF - English, German - DIN
Learn More€79.72 -
ASTM F1347-23
Standard Specification for Manually Operated Fueling Hose Reels
5/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1347-23 + Redline
Standard Specification for Manually Operated Fueling Hose Reels
5/1/2023 - PDF - English - ASTM
Learn More€65.00 -
€54.00
-
€65.00
-
BS EN 13483:2022 + Redline
Tracked Changes. Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
4/28/2023 - PDF - English - BSI
Learn More€382.00 -
CEN/TR 17924:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Guidance on hydrogen specific aspects
4/26/2023 - PDF - English - NBN
Learn More€184.00 -
€250.00
-
23/30456312 DC:2023
BS ISO 10928. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
4/24/2023 - PDF - English - BSI
Learn More€24.00 -
23/30469219 DC:2023
BS EN IEC 60335-2-40. Household and similar electrical appliances. Safety Part 2-40. Particular requirements for heat pumps, air-conditioners dehumidifiers
4/20/2023 - PDF - English - BSI
Learn More€24.00 -
23/30469222 DC:2023
BS EN IEC 60335-2-40 AMD 11. Household and similar electrical appliances. Safety Part 2-40. Particular requirements for heat pumps, air-conditioners dehumidifiers
4/20/2023 - PDF - English - BSI
Learn More€24.00 -
23/30442856 DC:2023
Draft BS ISO 12759-6. Fans — Efficiency classification for fans Part 6: Calculation of the fan energy index
4/20/2023 - PDF - English - BSI
Learn More€24.00 -
23/30466158 DC:2023
BS EN 17970. Ductile iron pipes. Push-in joints for ductile iron pipe systems. Resistance against root intrusion. Requirements and test methods
4/18/2023 - PDF - English - BSI
Learn More€24.00 -
23/30468051 DC:2023
BS EN 12007-5. Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Part 5. Service lines. Specific functional requirements
4/17/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 13483:2022
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
4/13/2023 - PDF - English - BSI
Learn More€293.00 -
NBN EN 1401-1:2019+A1:2023
Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : Spécifications pour tubes, raccords et le système
4/12/2023 - PDF - French - NBN
Learn More€163.00 -
NBN EN 1401-1:2019+A1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
4/12/2023 - PDF - English - NBN
Learn More€163.00 -
NBN EN 1401-1:2019+A1:2023
Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
4/12/2023 - PDF - German - NBN
Learn More€163.00 -
UNE-EN 16480:2023
Pumps - Rotodynamic pumps - Minimum required efficiency of water pumps and determination of Minimum Efficiency Index (MEI)
4/12/2023 - PDF - Spanish - AENOR
Learn More€87.00 -
UNE-EN 16480:2023
Pumps - Rotodynamic pumps - Minimum required efficiency of water pumps and determination of Minimum Efficiency Index (MEI)
4/12/2023 - PDF - English - AENOR
Learn More€104.40 -
UNE-EN 15776:2023
Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 %
4/12/2023 - PDF - Spanish - AENOR
Learn More€88.00 -
UNE-EN 15776:2023
Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 %
4/12/2023 - PDF - English - AENOR
Learn More€105.60 -
UNE-EN ISO 11114-6:2023
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO 11114-6:2022)
4/12/2023 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 11114-6:2023
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO 11114-6:2022)
4/12/2023 - PDF - English - AENOR
Learn More€81.60 -
23/30468096 DC:2023
BS EN 10216-2. Seamless steel tubes for pressure purposes. Technical delivery conditions Part 2. Non-alloy and alloy with specified elevated temperature properties
4/11/2023 - PDF - English - BSI
Learn More€24.00 -
23/30468528 DC:2023
BS EN 60335-2-65 AMD 13. Household and similar electrical appliances. Safety Part 2-65. Particular requirements for air-cleaning appliances
4/6/2023 - PDF - English - BSI
Learn More€24.00 -
NBN EN 14758-1:2023
Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Polypropylène avec modificateurs minéraux (PP-MD) - Partie 1 : Spécifications pour les tubes, les raccords et le système
4/5/2023 - PDF - French - NBN
Learn More€163.00 -
UNE-EN 13094:2021+A1:2023
Tanks for the transport of dangerous goods - Metallic gravity-discharge tanks - Design and construction
4/5/2023 - PDF - Spanish - AENOR
Learn More€133.00 -
UNE-EN 13094:2021+A1:2023
Tanks for the transport of dangerous goods - Metallic gravity-discharge tanks - Design and construction
4/5/2023 - PDF - English - AENOR
Learn More€159.60 -
NBN EN 14758-1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
4/5/2023 - PDF - English - NBN
Learn More€163.00 -
NBN EN 14758-1:2023
Kunststoff-Rohrleitungssysteme für erdverlegte drucklose Abwasserkanäle und -leitungen - Polypropylen mit mineralischen Additiven (PP-MD) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
4/5/2023 - PDF - German - NBN
Learn More€163.00 -
UNE-EN 17038-1:2023
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
4/5/2023 - PDF - Spanish - AENOR
Learn More€82.00 -
UNE-EN 17038-1:2023
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
4/5/2023 - PDF - English - AENOR
Learn More€98.40 -
UNE-EN 17038-2:2023
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
4/5/2023 - PDF - Spanish - AENOR
Learn More€115.00 -
UNE-EN 17038-2:2023
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
4/5/2023 - PDF - English - AENOR
Learn More€138.00 -
BS ISO 24131-1:2023
Internal protection by polymeric lining for ductile iron pipes. Requirements and test methods Polyurethane
4/5/2023 - PDF - English - BSI
Learn More€250.00 -
BS ISO 24131-2:2023
Internal protection by polymeric lining for ductile iron pipes. Requirements and test methods Epoxy
4/5/2023 - PDF - English - BSI
Learn More€180.00 -
23/30456358 DC:2023
BS ISO 12829. Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
4/4/2023 - PDF - English - BSI
Learn More€24.00 -
23/30453511 DC:2023
BS 9295 AMD 1. Guide to the structural design of buried pipelines
4/3/2023 - PDF - English - BSI
Learn More€24.00 -
NF EN 1401-1/IN1, P16-352-1/IN1 (04/2023)
Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : spécifications pour tubes, raccords et le système
4/1/2023 - Paper - French - AFNOR
Learn More€23.00 -
DIN EN 15001-2:2023-04
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance, German version EN 15001-2:2023.
4/1/2023 - PDF - German - DIN
Learn More€92.62 -
DIN EN 15001-1:2023-04
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing, German version EN 15001-1:2023.
4/1/2023 - PDF - German - DIN
Learn More€216.26