23 : Fluid systems and components for general use
-
NBN ISO 5352-1:2023
Hydraulic fluid power — Determination of discharge flow rate and thermal losses of gas loaded accumulators — Part 1: Test method ISO 5352-1:2023
12/11/2023 - PDF - English - NBN
Learn More€121.00 -
IEEE 1017.4:2023
IEEE Recommended Practice for Testing and Rating of Electrical Submersible Pump Motors
12/11/2023 - PDF - English - IEEE
Learn More€73.00 -
IEEE 1017.4:2023
IEEE Recommended Practice for Testing and Rating of Electrical Submersible Pump Motors
12/11/2023 - Paper - English - IEEE
Learn More€91.00 -
NBN ISO 4706:2023
Gas cylinders — Refillable welded steel cylinders — Test pressure 60 bar and below ISO 4706:2023
12/11/2023 - PDF - English - NBN
Learn More€163.00 -
23/30439405 DC:2023
BS 6739. Instrumentation in process control systems: installation design and practice. Code of practice
12/8/2023 - PDF - English - BSI
Learn More€79.00 -
BS EN ISO 4413:2010
Hydraulic fluid power. General rules and safety requirements for systems and their components
12/7/2023 - PDF - English - BSI
Learn More€180.00 -
BS ISO 12759-1:2023
Fans. Efficiency classification for fans General requirements
12/7/2023 - PDF - English - BSI
Learn More€250.00 -
PD ISO/TS 6737:2023
Vacuum technology. Vacuum gauges. Characteristics for a stable ionisation vacuum gauge
12/7/2023 - PDF - English - BSI
Learn More€250.00 -
UNE-EN 13110:2023
LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
12/5/2023 - PDF - Spanish - AENOR
Learn More€95.00 -
UNE-EN 13110:2023
LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
12/5/2023 - PDF - English - AENOR
Learn More€114.00 -
UNE-EN ISO 9809-4:2023
Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa (ISO 9809-4:2021)
12/5/2023 - PDF - Spanish - AENOR
Learn More€110.00 -
UNE-EN ISO 9809-4:2023
Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa (ISO 9809-4:2021)
12/5/2023 - PDF - English - AENOR
Learn More€132.00 -
ASTM G158-23
Standard Guide for Three Methods of Assessing Buried Steel Tanks
12/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM G158-23 + Redline
Standard Guide for Three Methods of Assessing Buried Steel Tanks
12/1/2023 - PDF - English - ASTM
Learn More€71.00 -
NF EN 14025, M88-172 (12/2023)
Citernes pour le transport de matières dangereuses - Citernes métalliques sous pression - Conception et construction
12/1/2023 - Paper - French - AFNOR
Learn More€130.67 -
DIN CEN/TS 1046:2023-12
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation, German version CEN/TS 1046:2021
12/1/2023 - PDF - German - DIN
Learn More€84.02 -
DIN CEN/TR 15120:2023-12
Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading, German version CEN/TR 15120:2022
12/1/2023 - PDF - German - DIN
Learn More€101.03 -
€23.00
-
€99.33
-
NF EN 17038-4, E44-406-4 (12/2023)
Pompes - Méthodes de qualification de l'indice de rendement des groupes motopompes rotodynamiques - Partie 4 : essais et calcul de l'indice de rendement énergétique (EEI) pour les unités de pompage submersibles des forages
12/1/2023 - Paper - French - AFNOR
Learn More€99.33 -
DIN EN 13445-2:2023-12
Unfired pressure vessels - Part 2: Materials, German version EN 13445-2:2021+A1:2023
12/1/2023 - PDF - German - DIN
Learn More€184.58 -
DIN EN ISO 11623:2023-12
Gas cylinders - Composite cylinders and tubes - Periodic inspection and testing (ISO 11623:2023), German version EN ISO 11623:2023
12/1/2023 - PDF - German - DIN
Learn More€136.82 -
PR NF EN 88-1/A1, D36-302-1/A1PR (12/2023)
Dispositifs de sécurité et de contrôle pour les brûleurs à gaz et appareils utilisant des combustibles gazeux - Partie 1 : Régulateurs de pression pour pression amont inférieure ou égale à 50 kPa
12/1/2023 - Paper - English, French - AFNOR
Learn More€25.50 -
PR NF EN 1854/A1, D36-390/A1PR (12/2023)
Equipements auxiliaires pour brûleurs et appareils utilisant des combustibles gazeux ou liquides - Dispositifs de surveillance de pression pour brûleurs et appareils à gaz
12/1/2023 - Paper - English, French - AFNOR
Learn More€25.50 -
NF EN 1854+A1, D36-390 (12/2023)
Equipements auxiliaires pour brûleurs et appareils utilisant des combustibles gazeux ou liquides - Dispositifs de surveillance de pression pour brûleurs et appareils à gaz
12/1/2023 - Paper - French - AFNOR
Learn More€130.50 -
NF EN 253+A1, E39-011 (12/2023)
Tuyaux de chauffage urbain - Systèmes bloqués de tuyaux pour les réseaux d'eau chaude enterrées directement - Assemblages de tubes de service en acier manufacturés, isolation thermique en polyuréthane et tube de protection en polyéthylène
12/1/2023 - Paper - French - AFNOR
Learn More€108.33 -
NF EN 88-1+A1, D36-302-1 (12/2023)
Dispositifs de sécurité et de contrôle pour les brûleurs à gaz et appareils utilisant des combustibles gazeux - Partie 1 : régulateurs de pression pour pression amont inférieure ou égale à 50 kPa
12/1/2023 - Paper - French - AFNOR
Learn More€118.00 -
DIN EN ISO 13351:2023-12
Fans - Dimensions (ISO/DIS 13351:2023), German and English version prEN ISO 13351:2023
12/1/2023 - PDF - English, German - DIN
Learn More€79.72 -
€80.50
-
NF ISO 5119, E48-570 (12/2023)
Capacité d'étanchéité à basse température des joints en élastomère - Méthodes d'essai
12/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
ASTM B622-23
Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
12/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM B622-23 + Redline
Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
12/1/2023 - PDF - English - ASTM
Learn More€71.00 -
ASTM B828-23
Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
12/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM B828-23 + Redline
Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
12/1/2023 - PDF - English - ASTM
Learn More€71.00 -
DIN CEN/TR 1591-2:2023-12
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters, German version CEN/TR 1591-2:2020
12/1/2023 - PDF - German - DIN
Learn More€88.04 -
DIN EN ISO 6134:2023-12
Rubber hoses and hose assemblies for saturated steam - Specification (ISO/DIS 6134:2023), German and English version prEN ISO 6134:2023
12/1/2023 - PDF - English, German - DIN
Learn More€79.72 -
€60.00
-
€71.00
-
VG 95925-1:2023-12
Hose assemblies - Part 1: For fuelling and pipelines - Overview, Text in German and English
12/1/2023 - PDF - English, German - DIN
Learn More€179.72 -
NF EN 751-3/IN1, D36-106-3/IN1 (12/2023)
Matériaux d'étanchéité pour raccords filetés en contact des gaz de la 1ère, 2ème et 3ème famille et de l'eau chaude - Partie 3 : bandes et cordons en PTFE non fritté
12/1/2023 - Paper - French - AFNOR
Learn More€23.00 -
NF EN 751-3+A1, D36-106-3 (12/2023)
Matériaux d'étanchéité pour raccords filetés en contact des gaz de la 1ère, 2ème et 3ème famille et de l'eau chaude - Partie 3 : bandes et cordons en PTFE non fritté
12/1/2023 - Paper - French - AFNOR
Learn More€68.50 -
DIN 30340-1:2023-12
Coatings for mechanical protection of buried or submerged pipelines - Part 1: Quality assurance for factory-made coatings.
12/1/2023 - PDF - German - DIN
Learn More€115.33 -
NBN EN 13480-4:2017/A2:2023
Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation
11/30/2023 - PDF - French - NBN
Learn More€20.00 -
NBN EN 13480-4:2017/A1:2023
Tuyauteries industrielles métalliques - Partie 4 : Fabrication et installation
11/30/2023 - PDF - French - NBN
Learn More€20.00 -
NBN EN 13480-4:2017/A2:2023
Metallic industrial piping - Part 4: Fabrication and installation
11/30/2023 - PDF - English - NBN
Learn More€20.00 -
NBN EN 13480-4:2017/A1:2023
Metallic industrial piping - Part 4: Fabrication and installation
11/30/2023 - PDF - English - NBN
Learn More€20.00 -
BS ISO 12829:2023 + Redline
Tracked Changes. Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
11/30/2023 - PDF - English - BSI
Learn More€222.00 -
BS ISO 21360-5:2023
Vacuum technology. Standard methods for measuring vacuum-pump performance Non-evaporable getter (NEG) vacuum pumps
11/30/2023 - PDF - English - BSI
Learn More€293.00 -
UNE-EN ISO 28765:2023
Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2022)
11/29/2023 - PDF - Spanish - AENOR
Learn More€80.00 -
UNE-EN ISO 28765:2023
Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2022)
11/29/2023 - PDF - English - AENOR
Learn More€96.00 -
UNE-EN 14433:2023
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves
11/29/2023 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN 14433:2023
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves
11/29/2023 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN 14841:2023
LPG equipment and accessories - Filling and discharge procedures for LPG rail tankers
11/29/2023 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 14841:2023
LPG equipment and accessories - Filling and discharge procedures for LPG rail tankers
11/29/2023 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 12729:2023
Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
11/29/2023 - PDF - Spanish - AENOR
Learn More€77.00 -
UNE-EN 12729:2023
Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
11/29/2023 - PDF - English - AENOR
Learn More€92.40 -
NBN EN 1092-2:2023
Brides et leurs assemblages - Brides circulaires pour tuyaux, appareils de robinetterie, raccords et accessoires, désignées PN - Partie 2 : Brides en fonte
11/29/2023 - PDF - French - NBN
Learn More€184.00 -
BS EN 1092-2:2023
Flanges and their joints. Circular flanges for pipes, valves, fittings accessories, PN designated Cast iron
11/29/2023 - PDF - English - BSI
Learn More€348.00 -
NBN EN 1092-2:2023
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
11/29/2023 - PDF - English - NBN
Learn More€184.00 -
BS ISO 5119:2023
Low temperature sealing capability of elastomeric seals. Test methods
11/28/2023 - PDF - English - BSI
Learn More€250.00 -
BS ISO 12829:2023
Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
11/27/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN 19:2023 + Redline
Tracked Changes. Industrial valves. Marking of metallic valves
11/23/2023 - PDF - English - BSI
Learn More€235.00 -
UNE-EN 14758-1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
11/22/2023 - PDF - Spanish - AENOR
Learn More€89.00 -
UNE-EN 14758-1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
11/22/2023 - PDF - English - AENOR
Learn More€106.80 -
€180.00
-
PD CEN/TR 16395:2023
Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document
11/21/2023 - PDF - English - BSI
Learn More€180.00 -
€293.00
-
BS ISO 16494-1:2022+A1:2023
Heat recovery ventilators and energy ventilators. Method of test for performance Development metrics evaluation related
11/20/2023 - PDF - English - BSI
Learn More€331.00 -
22/30433302 DC:2023
BS EN 805. Water supply. Requirements for systems and components outside buildings
11/16/2023 - PDF - English - BSI
Learn More€24.00 -
NBN EN 19:2023
Robinetterie industrielle - Marquage des appareils de robinetterie métalliques
11/16/2023 - PDF - French - NBN
Learn More€89.00 -
NBN EN 19:2023
Industriearmaturen - Kennzeichnung von Armaturen aus Metall
11/16/2023 - PDF - German - NBN
Learn More€89.00 -
€43.00
-
€89.00
-
UNE-EN 12889:2023
Trenchless construction and testing of drains and sewers
11/15/2023 - PDF - Spanish - AENOR
Learn More€99.00 -
UNE-EN 12889:2023
Trenchless construction and testing of drains and sewers
11/15/2023 - PDF - English - AENOR
Learn More€118.80 -
€47.00
-
23/30463965 DC:2023
Draft BS ISO 4376. Cycle energy requirement. Test method
11/15/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN 17877:2023
Dynamic mixers and agitators. Definitions and hydraulic characterizations
11/14/2023 - PDF - English - BSI
Learn More€348.00 -
BS EN 15969-1:2022 + Redline
Tracked Changes. Tanks for transport of dangerous goods. Digital interface the data transfer between tank vehicle and with stationary facilities Protocol specification. Control, measurement event
11/10/2023 - PDF - English - BSI
Learn More€518.00 -
NBN EN 17877:2023
Mélangeurs et agitateurs dynamiques - Définitions et caractéristiques hydrauliques
11/9/2023 - PDF - French - NBN
Learn More€163.00 -
NBN EN 17877:2023
Dynamic mixers and agitators - Definitions and hydraulic characterizations
11/9/2023 - PDF - English - NBN
Learn More€163.00 -
BS EN 17670-2:2023
Plastics piping systems for non-pressure underground conveyance of surface water. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Specification road gullies
11/8/2023 - PDF - English - BSI
Learn More€348.00 -
PD CEN/TS 1455-2:2023 + Redline
Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Assessment of conformity
11/6/2023 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 2505:2023 + Redline
Tracked Changes. Thermoplastics pipes. Longitudinal reversion. Test method and parameters
11/6/2023 - PDF - English - BSI
Learn More€197.00 -
UNE-CEN/TS 14632:2023
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in November of 2023.)
11/3/2023 - PDF - English - AENOR
Learn More€76.00 -
PD CEN/TS 1566-2:2023 + Redline
Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Assessment of conformity
11/3/2023 - PDF - English - BSI
Learn More€326.00 -
23/30478862 DC:2023
BS EN 12100 Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports
11/2/2023 - PDF - English - BSI
Learn More€24.00 -
23/30478865 DC:2023
BS EN 1680 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanisms
11/2/2023 - PDF - English - BSI
Learn More€24.00 -
NBN EN 17670-2:2023
Systèmes de canalisations en plastique pour le transport souterrain sans pression des eaux de surface - Poly(chlorure de vinyle) non plastifié (PVC-U), en polypropylène (PP) et en polyéthylène (PE) - Partie 2 : Spécifications relatives aux bouches d'égout
11/2/2023 - PDF - French - NBN
Learn More€163.00 -
NBN EN 17670-2:2023
Kunststoff-Rohrleitungssysteme für die drucklose unterirdische Ableitung von Niederschlagswasser - Weichmacherfreies Polyvinylchlorid (PVC-U), Polypropylen (PP) und Polyethylen (PE) - Teil 2: Anforderungen an Straßenabläufe
11/2/2023 - PDF - German - NBN
Learn More€163.00 -
BS EN 17176-2:2019+A1:2022
Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Pipes
11/2/2023 - PDF - English - BSI
Learn More€293.00 -
NBN EN 17670-2:2023
Plastics piping systems for non-pressure underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specification for road gullies
11/2/2023 - PDF - English - NBN
Learn More€163.00 -
NF EN 19, E29-310 (11/2023)
Robinetterie industrielle - Marquage des appareils de robinetterie métalliques
11/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
NF ISO 5115, E29-407 (11/2023)
Robinetterie industrielle - Actionnement des appareils de robinetterie à fraction de tour
11/1/2023 - Paper - French - AFNOR
Learn More€99.33 -
DIN EN 1455-1:2023-11
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system, German version EN 1455-1:2022
11/1/2023 - PDF - German - DIN
Learn More€104.95 -
DIN EN 1566-1:2023-11
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system, German version EN 1566-1:2022
11/1/2023 - PDF - German - DIN
Learn More€110.00 -
DIN EN 1401-1:2023-11
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system, German version EN 1401-1:2019+A1:2023
11/1/2023 - PDF - German - DIN
Learn More€115.33 -
DIN EN 12100:2023-11
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports, German and English version prEN 12100:2023
11/1/2023 - PDF - English, German - DIN
Learn More€59.63 -
DIN EN 1680:2023-11
Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms, German and English version prEN 1680:2023
11/1/2023 - PDF - English, German - DIN
Learn More€52.90 -
ASTM A888-23
Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
11/1/2023 - PDF - English - ASTM
Learn More€100.00 -
ASTM A888-23 + Redline
Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
11/1/2023 - PDF - English - ASTM
Learn More€119.00 -
ASTM D4865-23
Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
11/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM D4865-23 + Redline
Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
11/1/2023 - PDF - English - ASTM
Learn More€71.00 -
DIN EN 14758-1:2023-11
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system, German version EN 14758-1:2023
11/1/2023 - PDF - German - DIN
Learn More€120.84 -
DIN ISO 8132:2023-11
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series (ISO 8132:2022)
11/1/2023 - PDF - German - DIN
Learn More€79.72 -
NF EN IEC 60335-2-51, C73-851 (11/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-51 : exigences particulières pour les pompes de circulation fixes pour installations de chauffage et de distribution d'eau
11/1/2023 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 60335-2-51/A11, C73-851/A11 (11/2023)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-51 : exigences particulières pour les pompes de circulation fixes pour installations de chauffage et de distribution d'eau
11/1/2023 - Paper - French - AFNOR
Learn More€49.50 -
DIN ISO 12151-2:2023-11
Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings (ISO 12151-2:2022), Text in German and English
11/1/2023 - PDF - English, German - DIN
Learn More€72.80 -
SAE J 1754/1:2023-11-01
Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 1: Procurement Document
11/1/2023 - PDF - English - SAE
Learn More€96.00 -
NF EN ISO 10524-1/A1, S95-159-1/A1 (11/2023)
Détendeurs pour l'utilisation avec les gaz médicaux - Partie 1 : détendeurs et détendeurs-débitmètres - Amendement 1
11/1/2023 - Paper - French - AFNOR
Learn More€25.67 -
DIN EN ISO 11363-1:2023-11
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018 + Amd 1:2023), German version EN ISO 11363-1:2018 + A1:2023
11/1/2023 - PDF - German - DIN
Learn More€72.80 -
NF EN 13480-4/A1, E86-700-4/A1 (11/2023)
Tuyauteries industrielles métalliques - Partie 4 : fabrication et installation
11/1/2023 - Paper - French - AFNOR
Learn More€31.00 -
NF EN 13480-4/A2, E86-700-4/A2 (11/2023)
Metallic industrial piping - Part 4 : Fabrication and installation
11/1/2023 - Paper - French - AFNOR
Learn More€31.00 -
PR NF EN ISO 15995/A1, M88-730/A1PR (11/2023)
Bouteilles à gaz - Spécifications et essais pour valves de bouteilles de GPL - Fermeture manuelle - Amendement 1
11/1/2023 - Paper - English, French - AFNOR
Learn More€74.00 -
PR NF EN ISO 14245/A1, M88-729/A1PR (11/2023)
Bouteilles à gaz - Spécifications et essais pour valves de bouteilles de GPL - Fermeture automatique - Amendement 1
11/1/2023 - Paper - English, French - AFNOR
Learn More€64.50 -
PR NF EN ISO 17871/A1, E29-131/A1PR (11/2023)
Bouteilles à gaz - Robinets de bouteilles à ouverture rapide - Spécifications et essais de type - Amendement 1
11/1/2023 - Paper - English, French - AFNOR
Learn More€56.00 -
ASTM A450/A450M-23
Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
11/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM A450/A450M-23 + Redline
Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
11/1/2023 - PDF - English - ASTM
Learn More€71.00 -
ASTM A381/A381M-23
Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
11/1/2023 - PDF - English - ASTM
Learn More€52.00 -
ASTM A381/A381M-23 + Redline
Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
11/1/2023 - PDF - English - ASTM
Learn More€63.00 -
PR NF EN 12309-2, E35-600-2PR (11/2023)
Appareils à sorption fonctionnant au gaz pour le chauffage et/ou le refroidissement de débit calorifique sur PCI inférieur ou égal à 70 kW - Partie 2 : Sécurité
11/1/2023 - Paper - English, French - AFNOR
Learn More€168.00 -
ASTM B491/B491M-23
Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
11/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM B491/B491M-23 + Redline
Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
11/1/2023 - PDF - English - ASTM
Learn More€71.00 -
NF P43-018 (11/2023)
Robinetterie de bâtiment - Appareil de contrôle des dispositifs de robinetterie installés sur les réseaux d'eau potable - Caractéristiques
11/1/2023 - Paper - French - AFNOR
Learn More€48.00 -
NF EN 17670-2, P16-370-2 (11/2023)
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Manholes, inspection chambers and road gullies for storm water systems made of unplasticized polyvinyl chloride (PVC-U), polypropylene (PP) and polyethylene - Systèmes de canalisations en plastique pour le transport et le stockage souterrains sans pression de l'eau non potable - Regards, boîtes d'inspection et de branchement et bouches d'égout pour les réseaux d'eaux pluviales en poly(chlorure de vinyle) non plastifié (PVC-U), en polypropylène (PP)
11/1/2023 - Paper - French - AFNOR
Learn More€119.00 -
NF EN 17877, E44-601 (11/2023)
Mélangeurs et agitateurs dynamiques - Définitions et caractéristiques hydrauliques
11/1/2023 - Paper - French - AFNOR
Learn More€119.00 -
ASTM D2152-23
Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
11/1/2023 - PDF - English - ASTM
Learn More€52.00 -
ASTM D2152-23 + Redline
Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
11/1/2023 - PDF - English - ASTM
Learn More€63.00 -
ASTM F1563-23
Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
11/1/2023 - PDF - English - ASTM
Learn More€52.00 -
ASTM F1563-23 + Redline
Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
11/1/2023 - PDF - English - ASTM
Learn More€63.00 -
ASTM F2986-23
Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate, Heap Leach Aeration and Other Mining Applications
11/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM F2986-23 + Redline
Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate, Heap Leach Aeration and Other Mining Applications
11/1/2023 - PDF - English - ASTM
Learn More€71.00 -
ASTM A500/A500M-23
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
11/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM A500/A500M-23 + Redline
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
11/1/2023 - PDF - English - ASTM
Learn More€71.00 -
DIN 3238:2023-11
Couplings for compressed air - Claw coupling, 42 mm internal width, with securing nut - Coupling with male, female and hose connection ends, joint ring
11/1/2023 - PDF - German - DIN
Learn More€59.63 -
DIN 3489:2023-11
Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring
11/1/2023 - PDF - German - DIN
Learn More€79.72 -
ASTM F3124-23a
Standard Practice for Data Recording the Procedure used to Produce Heat Butt Fusion Joints in Plastic Piping Systems or Fittings
11/1/2023 - PDF - English - ASTM
Learn More€52.00 -
ASTM F3124-23a + Redline
Standard Practice for Data Recording the Procedure used to Produce Heat Butt Fusion Joints in Plastic Piping Systems or Fittings
11/1/2023 - PDF - English - ASTM
Learn More€63.00 -
NF EN 1092-2, E29-200-2 (11/2023)
Brides et leurs assemblages - Brides circulaires pour tuyaux, appareils de robinetterie, raccords et accessoires, désignées PN - Partie 2 : brides en fonte
11/1/2023 - Paper - French - AFNOR
Learn More€118.00 -
€293.00
-
BS EN ISO 5211:2023 + Redline
Tracked Changes. Industrial valves. Part-turn actuator attachments
10/31/2023 - PDF - English - BSI
Learn More€382.00 -
UNE-EN ISO 1179-2:2023
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 1179-2:2023
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
10/31/2023 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
10/31/2023 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
10/31/2023 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
10/31/2023 - PDF - English - AENOR
Learn More€72.00 -
BS EN ISO 2505:2023
Thermoplastics pipes. Longitudinal reversion. Test method and parameters
10/31/2023 - PDF - English - BSI
Learn More€151.00 -
BS ISO 5222-1:2023
Heat recovery ventilators and energy ventilators. Testing calculating methods for seasonal performance factor Sensible heating factors of heat (HRV)
10/26/2023 - PDF - English - BSI
Learn More€250.00 -
NBN EN ISO 2505:2023
Tubes en matières thermoplastiques - Retrait longitudinal à chaud - Méthode d'essai et paramètres (ISO 2505:2023)
10/26/2023 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 2505:2023
Rohre aus Thermoplasten - Längsschrumpf - Prüfverfahren und Kennwerte (ISO 2505:2023)
10/26/2023 - PDF - German - NBN
Learn More€37.00 -
BS EN ISO 13479:2022 + Redline
Tracked Changes. Polyolefin pipes for the conveyance of fluids. Determination of resistance to crack propagation. Test method for slow crack growth on notched pipes
10/26/2023 - PDF - English - BSI
Learn More€326.00 -
NBN EN ISO 2505:2023
Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2023)
10/26/2023 - PDF - English - NBN
Learn More€37.00 -
UNE-EN 13799:2023
LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
10/25/2023 - PDF - Spanish - AENOR
Learn More€82.00 -
UNE-EN 13799:2023
LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
10/25/2023 - PDF - English - AENOR
Learn More€98.40 -
PD CEN/TS 1455-2:2023
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Assessment of conformity
10/19/2023 - PDF - English - BSI
Learn More€250.00 -
PD CEN/TS 1566-2:2023
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Assessment of conformity
10/19/2023 - PDF - English - BSI
Learn More€250.00 -
CEN/TS 1455-2:2023
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Acrylnitril-Butadien-Styrol (ABS) - Teil 2: Beurteilung der Konformität
10/18/2023 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 1566-2:2023
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Chloriertes Polyvinylchlorid (PVC-C) - Teil 2: Beurteilung der Konformität
10/18/2023 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 1455-2:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity
10/18/2023 - PDF - English - NBN
Learn More€121.00 -
CEN/TS 1566-2:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity
10/18/2023 - PDF - English - NBN
Learn More€121.00 -
€96.00
-
NBN ISO 4982:2023
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Arch-shaped, corrugated wall chambers made of PE or PP used for retention, detention, storage and transportation of storm water systems — Product specifications and performance criteria ISO 4982:2023
10/17/2023 - PDF - English - NBN
Learn More€163.00 -
NBN ISO 9854-1:2023
Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 1: General test method ISO 9854-1:2023
10/17/2023 - PDF - English - NBN
Learn More€58.00 -
€24.00
-
BS EN 558:2022 + Redline
Tracked Changes. Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valves
10/15/2023 - PDF - English - BSI
Learn More€454.00 -
BS EN ISO 5210:2023 + Redline
Tracked Changes. Industrial valves. Multi-turn valve actuator attachments
10/15/2023 - PDF - English - BSI
Learn More€326.00 -
BS EN 15776:2022 + Redline
Tracked Changes. Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%
10/15/2023 - PDF - English - BSI
Learn More€432.00 -
23/30468757 DC:2023
BS EN ISO 6134. Rubber hoses and hose assemblies for saturated steam. Specification
10/12/2023 - PDF - English - BSI
Learn More€24.00 -
UNE-EN 14525:2023
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PVC-O, PE, Fibre-cement
10/11/2023 - PDF - Spanish - AENOR
Learn More€78.00 -
UNE-EN 14525:2023
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PVC-O, PE, Fibre-cement
10/11/2023 - PDF - English - AENOR
Learn More€93.60 -
PD CEN/TR 15120:2022 + Redline
Tracked Changes. Tanks for transport of dangerous goods. Guidance and recommendations for loading, transport and unloading
10/10/2023 - PDF - English - BSI
Learn More€454.00 -
€250.00
-
SAE J 343:2023-10-05
Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
10/5/2023 - PDF - English - SAE
Learn More€83.00 -
BS EN 12067-2:2022 + Redline
Tracked Changes. Safety and control devices for burners appliances burning gaseous or liquid fuels. Control functions in electronic systems Fuel/air ratio control/supervision of the type
10/5/2023 - PDF - English - BSI
Learn More€492.00 -
BS ISO 4706:2023 + Redline
Tracked Changes. Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below
10/5/2023 - PDF - English - BSI
Learn More€382.00 -
€449.00
-
UNE-EN 15218:2023
Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements
10/4/2023 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 15218:2023
Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements
10/4/2023 - PDF - English - AENOR
Learn More€81.60 -
NBN EN ISO 5210:2023
Robinetterie industrielle - Raccordement des actionneurs multitours aux appareils de robinetterie (ISO 5210:2023)
10/4/2023 - PDF - French - NBN
Learn More€121.00 -
NBN EN ISO 5210:2023
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2023)
10/4/2023 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 11119-3:2020/A1:2023
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners — Amendment 1 ISO 11119-3:2020/Amd 1:2023
10/3/2023 - PDF - English - NBN
Learn More€20.00 -
DIN 2405:2023-10
Pipelines in refrigerating systems and cooling equipment - Marking
10/1/2023 - PDF - German - DIN
Learn More€52.90 -
NF EN ISO 5210, E29-401 (10/2023)
Robinetterie industrielle - Raccordement des actionneurs multitours aux appareils de robinetterie
10/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
DIN 3537-1:2023-10
Gas stop valves for domestic gas installations up to 5 bar - Part 1: Requirements and tests
10/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN 3537-4:2023-10
Gas stop valves for domestic gas installations up to 5 bar - Part 4: Conformity assessment.
10/1/2023 - PDF - German - DIN
Learn More€59.63 -
DIN 1986-3:2023-10
Drainage systems on private ground - Part 3: Specifications for service and maintenance
10/1/2023 - PDF - German - DIN
Learn More€79.72 -
DIN 4262-1:2023-10
Pipes and fittings for subsoil drainage of trafficked areas and underground engineering - Part 1: Pipes, fittings and their joints made from PCV-U, PP and PE
10/1/2023 - PDF - German - DIN
Learn More€85.79 -
DIN/TS 4262-2:2023-10
Pipes and fittings for subsoil drainage of trafficked areas and underground engineering - Part 2: Guidance for the assessment of conformity for pipes, fittings and their joints made from PVC-U, PP and PE
10/1/2023 - PDF - German - DIN
Learn More€36.82 -
DIN EN 334/A1:2023-10
Gas pressure regulators for inlet pressure up to 10 MPa (100 bar), German and English version EN 334:2019/prA1:2022
10/1/2023 - PDF - English, German - DIN
Learn More€52.90 -
NF ISO 12759-1, E51-101-1 (10/2023)
Ventilateurs - Classification du rendement des ventilateurs - Partie 1 : exigences générales
10/1/2023 - Paper - French - AFNOR
Learn More€75.50 -
ASTM B359/B359M-23
Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
10/1/2023 - PDF - English - ASTM
Learn More€66.00 -
ASTM B359/B359M-23 + Redline
Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
10/1/2023 - PDF - English - ASTM
Learn More€79.00 -
ASTM B280-23
Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
10/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM B280-23 + Redline
Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
10/1/2023 - PDF - English - ASTM
Learn More€71.00 -
NF EN ISO 2505, T54-021 (10/2023)
Tubes en matières thermoplastiques - Retrait longitudinal à chaud - Méthode d'essai et paramètres
10/1/2023 - Paper - French - AFNOR
Learn More€48.00 -
NF ISO 5352-1, E48-154-1 (10/2023)
Transmissions hydrauliques - Détermination du débit de décharge et des pertes thermiques des accumulateurs hydropneumatiques - Partie 1 : méthode d'essai
10/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
DIN CEN ISO/TS 23818-2:2023-10
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021), German version CEN ISO/TS 23818-2:2022
10/1/2023 - PDF - German - DIN
Learn More€88.04