23 : Fluid systems and components for general use

Items 3401 to 3600 of 15592 total

Set Ascending Direction
per page

List  Grid 

  • NBN EN 1514-2:2014+A1:2021

    Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
    2/25/2021 - PDF - English - NBN
    Learn More
    €89.00

  • UNE-EN 215:2021

    Thermostatic radiator valves - Requirements and test methods
    2/24/2021 - PDF - Spanish - AENOR
    Learn More
    €90.00

  • UNE-EN 215:2021

    Thermostatic radiator valves - Requirements and test methods
    2/24/2021 - PDF - English - AENOR
    Learn More
    €108.00

  • UNE 60411:2019/1M:2021

    Pressure regulators for gas receiving installations with a maximum inlet operating pressure (MOPe) greater than 0,4 bar and up to 5 bar and a maximum outlet operating pressure (MOPs) up to 0,4 bar.
    2/24/2021 - PDF - Spanish - AENOR
    Learn More
    €27.00

  • PD ISO/TR 4808:2021

    Hydraulic fluid power. Interpolation method for particle count and filter test data
    2/19/2021 - PDF - English - BSI
    Learn More
    €180.00

  • UNE-EN 10216-2:2014+A1:2021

    Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
    2/17/2021 - PDF - Spanish - AENOR
    Learn More
    €99.00

  • UNE-EN 10216-2:2014+A1:2021

    Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
    2/17/2021 - PDF - English - AENOR
    Learn More
    €118.80

  • UNE-EN ISO 10893-3:2011/A1:2021

    Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
    2/17/2021 - PDF - Spanish - AENOR
    Learn More
    €34.00

  • UNE-EN ISO 10893-3:2011/A1:2021

    Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
    2/17/2021 - PDF - English - AENOR
    Learn More
    €40.80

  • UNE-EN 13766:2019+A1:2021

    Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
    2/17/2021 - PDF - Spanish - AENOR
    Learn More
    €71.00

  • UNE-EN 13766:2019+A1:2021

    Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
    2/17/2021 - PDF - English - AENOR
    Learn More
    €85.20

  • ASTM B1017-21

    Standard Specification for Seamless Copper-Iron Tube for Air Conditioning and Refrigeration
    2/15/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM B1017-21 + Redline

    Standard Specification for Seamless Copper-Iron Tube for Air Conditioning and Refrigeration
    2/15/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM B1018-21

    Standard Specification for Seamless Copper-Iron Tube for Air Conditioning and Refrigeration Field Service
    2/15/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM B1018-21 + Redline

    Standard Specification for Seamless Copper-Iron Tube for Air Conditioning and Refrigeration Field Service
    2/15/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM F1735-21

    Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
    2/15/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM F1735-21 + Redline

    Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
    2/15/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • BS EN 13555:2021

    Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
    2/15/2021 - PDF - English - BSI
    Learn More
    €293.00

  • BS EN ISO 15875-5:2003+A1:2020

    Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Fitness purpose of the system
    2/12/2021 - PDF - English - BSI
    Learn More
    €180.00

  • PD ISO/TR 4813:2021

    Hydraulic fluid power. Background, impact and use of ISO 11171:2020 on particle count and filter test data
    2/12/2021 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 15875-2:2003+A2:2020

    Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Pipes
    2/12/2021 - PDF - English - BSI
    Learn More
    €250.00

  • UNE-EN 17339:2021

    Transportable gas cylinders - Fully wrapped carbon composite cylinders and tubes for hydrogen
    2/3/2021 - PDF - Spanish - AENOR
    Learn More
    €97.00

  • UNE-EN 17339:2021

    Transportable gas cylinders - Fully wrapped carbon composite cylinders and tubes for hydrogen
    2/3/2021 - PDF - English - AENOR
    Learn More
    €116.40

  • BS EN 1514-2:2014+A1:2021

    Flanges and their joints. Gaskets for PN-designated flanges Spiral wound gaskets use with steel
    2/3/2021 - PDF - English - BSI
    Learn More
    €180.00

  • VDI 3805 Blatt 4:2021-02

    Product data exchange in the building services - Pumps (centrifugal pumps)
    2/1/2021 - PDF - English, German - VDI
    Learn More
    €166.35

  • ASTM E2981-21

    Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications
    2/1/2021 - PDF - English - ASTM
    Learn More
    €74.00

  • ASTM E2981-21 + Redline

    Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications
    2/1/2021 - PDF - English - ASTM
    Learn More
    €87.00

  • DIN EN 12493:2021-02

    LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture, German version EN 12493:2020
    2/1/2021 - PDF - German - DIN
    Learn More
    €136.82

  • FD ISO/TR 16219, E51-017 (02/2021)

    Fans - System effects and system effect factors
    2/1/2021 - Paper - French - AFNOR
    Learn More
    €140.00

  • ASTM F2105-21

    Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
    2/1/2021 - PDF - English - ASTM
    Learn More
    €57.00

  • ASTM F2105-21 + Redline

    Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
    2/1/2021 - PDF - English - ASTM
    Learn More
    €68.00

  • ASTM D2412-21

    Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    2/1/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM D2412-21 + Redline

    Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    2/1/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM D2444-21

    Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
    2/1/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM D2444-21 + Redline

    Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
    2/1/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • DIN CEN ISO/TS 23818-1:2021-02

    Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 1: Polyethylene (PE) material (ISO/TS 23818-1:2020), German version CEN ISO/TS 23818-1:2020
    2/1/2021 - PDF - German - DIN
    Learn More
    €113.64

  • NF EN 13555, E23-903 (02/2021)

    Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
    2/1/2021 - Paper - French - AFNOR
    Learn More
    €108.33

  • UNE-EN ISO 27509:2020

    Petroleum and natural gas industries - Compact flanged connections with IX seal ring (ISO 27509:2020) (Endorsed by Asociación Española de Normalización in February of 2021.)
    2/1/2021 - PDF - English - AENOR
    Learn More
    €147.00

  • DIN 86056:2021-02

    Conduit pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys
    2/1/2021 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 4069:2021-02

    Gas distribution grids - Indication labels.
    2/1/2021 - PDF - German - DIN
    Learn More
    €39.35

  • BS ISO 6002:2021

    Industrial valves. Bolted bonnet steel gate valves
    1/28/2021 - PDF - English - BSI
    Learn More
    €180.00

  • NBN EN ISO 15877-2:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
    1/27/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15877-2:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15877-5:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 22391-5:2009/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
    1/27/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 22391-5:2009/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15877-2:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877-2:2009/Amd 2:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 15877-5:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 22391-5:2009/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN 12493:2021

    LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
    1/27/2021 - PDF - French - NBN
    Learn More
    €184.00

  • NBN EN 12493:2021

    LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
    1/27/2021 - PDF - German - NBN
    Learn More
    €184.00

  • NBN EN 12493:2021

    LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
    1/27/2021 - PDF - English - NBN
    Learn More
    €184.00

  • NBN EN ISO 23088:2021

    Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l (ISO 23088:2020)
    1/27/2021 - PDF - French - NBN
    Learn More
    €121.00

  • NBN EN ISO 23088:2021

    Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l (ISO 23088:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €121.00

  • NBN EN ISO 23088:2021

    Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l (ISO 23088:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €121.00

  • NBN EN ISO 20475:2021

    Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018)
    1/27/2021 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN ISO 20475:2021

    Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018)
    1/27/2021 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN ISO 20475:2021

    Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018)
    1/27/2021 - PDF - English - NBN
    Learn More
    €58.00

  • NBN EN ISO 7866:2012/A1:2021

    Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 1 (ISO 7866:2012/Amd 1:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 7866:2012/A1:2021

    Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 1 (ISO 7866:2012/Amd 1:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN 13953:2021

    LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
    1/27/2021 - PDF - French - NBN
    Learn More
    €121.00

  • NBN EN 13953:2021

    LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
    1/27/2021 - PDF - German - NBN
    Learn More
    €121.00

  • NBN EN 13953:2021

    LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
    1/27/2021 - PDF - English - NBN
    Learn More
    €121.00

  • UNE-EN ISO 21809-3:2016/A1:2021

    Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings - Amendment 1: Introduction of mesh-backed coating systems (ISO 21809-3:2016/Amd 1:2020)
    1/27/2021 - PDF - Spanish - AENOR
    Learn More
    €53.00

  • UNE-EN ISO 21809-3:2016/A1:2021

    Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings - Amendment 1: Introduction of mesh-backed coating systems (ISO 21809-3:2016/Amd 1:2020)
    1/27/2021 - PDF - English - AENOR
    Learn More
    €63.60

  • NBN EN ISO 15875-5:2003/A1:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
    1/27/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15875-5:2003/A1:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15875-2:2003/A2:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
    1/27/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15875-2:2003/A2:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN 1329-1:2021

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    1/27/2021 - PDF - French - NBN
    Learn More
    €163.00

  • NBN EN 1329-1:2021

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    1/27/2021 - PDF - English - NBN
    Learn More
    €163.00

  • NBN EN ISO 22391-2:2009/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
    1/27/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 22391-2:2009/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-2:2017/A1:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
    1/27/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-2:2017/A1:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-5:2017/A1:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
    1/27/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-5:2017/A1:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN 1329-1:2021

    Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
    1/27/2021 - PDF - German - NBN
    Learn More
    €163.00

  • NBN EN ISO 15875-5:2003/A1:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15875-5:2003/Amd 1:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 15875-2:2003/A2:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd 2:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 22391-2:2009/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-2:2017/A1:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-5:2017/A1:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876-5:2017/Amd 1:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 15875-3:2003/A1:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
    1/27/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15875-3:2003/A1:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 22391-3:2009/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
    1/27/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 22391-3:2009/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-3:2017/A1:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
    1/27/2021 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-3:2017/A1:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
    1/27/2021 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15875-3:2003/A1:2021

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/Amd 1:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 22391-3:2009/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 15876-3:2017/A1:2021

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN ISO 27509:2021

    Petroleum and natural gas industries - Compact flanged connections with IX seal ring (ISO 27509:2020)
    1/27/2021 - PDF - English - NBN
    Learn More
    €205.00

  • CEN/TS 1329-2:2021

    Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 2: Empfehlungen für die Beurteilung der Konformität
    1/25/2021 - PDF - German - NBN
    Learn More
    €142.00

  • CEN/TS 1329-2:2021

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
    1/25/2021 - PDF - English - NBN
    Learn More
    €142.00

  • BS EN 14772:2021

    Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
    1/25/2021 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN ISO 20475:2020

    Gas cylinders. Cylinder bundles. Periodic inspection and testing
    1/21/2021 - PDF - English - BSI
    Learn More
    €180.00

  • UNE-EN 14276-1:2021

    Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
    1/20/2021 - PDF - Spanish - AENOR
    Learn More
    €136.00

  • UNE-EN 14276-1:2021

    Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
    1/20/2021 - PDF - English - AENOR
    Learn More
    €163.20

  • UNE-EN 14276-2:2021

    Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
    1/20/2021 - PDF - Spanish - AENOR
    Learn More
    €73.00

  • UNE-EN 14276-2:2021

    Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
    1/20/2021 - PDF - English - AENOR
    Learn More
    €87.60

  • UNE-EN 1440:2016+A2:2021

    LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection
    1/20/2021 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN 1440:2016+A2:2021

    LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection
    1/20/2021 - PDF - English - AENOR
    Learn More
    €88.80

  • UNE-EN 14382:2021

    Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar)
    1/20/2021 - PDF - Spanish - AENOR
    Learn More
    €126.00

  • UNE-EN 14382:2021

    Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar)
    1/20/2021 - PDF - English - AENOR
    Learn More
    €151.20

  • UNE-EN 13053:2021

    Ventilation for buildings - Air handling units - Rating and performance for units, components and sections
    1/20/2021 - PDF - Spanish - AENOR
    Learn More
    €124.00

  • UNE-EN 13053:2021

    Ventilation for buildings - Air handling units - Rating and performance for units, components and sections
    1/20/2021 - PDF - English - AENOR
    Learn More
    €148.80

  • UNE-EN ISO 12759-4:2021

    Fans - Efficiency classification for fans - Part 4: Driven fans at maximum operating speed (ISO 12759-4:2019)
    1/20/2021 - PDF - Spanish - AENOR
    Learn More
    €73.00

  • UNE-EN ISO 12759-4:2021

    Fans - Efficiency classification for fans - Part 4: Driven fans at maximum operating speed (ISO 12759-4:2019)
    1/20/2021 - PDF - English - AENOR
    Learn More
    €87.60

  • UNE-EN ISO 9170-1:2021

    Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2017)
    1/20/2021 - PDF - Spanish - AENOR
    Learn More
    €77.00

  • UNE-EN ISO 9170-1:2021

    Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2017)
    1/20/2021 - PDF - English - AENOR
    Learn More
    €92.40

  • PD CEN/TS 1329-2:2021

    Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance assessment of conformity
    1/19/2021 - PDF - English - BSI
    Learn More
    €250.00

  • ASTM C877M-21

    Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
    1/15/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM C877M-21 + Redline

    Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
    1/15/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • BS EN ISO 3949:2020

    Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification
    1/8/2021 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN ISO 7866:2012+A1:2020

    Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing
    1/8/2021 - PDF - English - BSI
    Learn More
    €348.00

  • BS EN ISO 23088:2020

    Gas cylinders. Periodic inspection and testing of welded steel pressure drums. Capacities up to 1 000 l
    1/8/2021 - PDF - English - BSI
    Learn More
    €250.00

  • BS ISO 4406:2021

    Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles
    1/8/2021 - PDF - English - BSI
    Learn More
    €180.00

  • 21/30368980 DC:2021

    BS ISO 21052. Restrained joint systems for ductile iron pipelines. Calculation rules for lengths to be restrained
    1/5/2021 - PDF - English - BSI
    Learn More
    €24.00

  • ASME API 579-1/ASME FFS-1-2021

    Fitness-For-Service
    1/1/2021 - PDF DRM - English - ASME
    Learn More
    €1,100.00

  • DVGW GW 301:2021-01

    Companies for Construction, Repair and Connection of Pipelines - Requirements and Tests
    1/1/2021 - PDF - German - DVGW
    Learn More
    €83.30

  • ASME B31Q-2021

    Pipeline Personnel Qualification
    1/1/2021 - PDF DRM - English - ASME
    Learn More
    €309.00

  • NF EN 1829-1, E44-093-1 (01/2021)

    High-pressure water jet machines - Safety requirements - Part 1 : machines
    1/1/2021 - Paper - French - AFNOR
    Learn More
    €108.33

  • DIN 3606:2021-01

    Pipe hoisting caps for casing pipes according to DIN 4918.
    1/1/2021 - PDF - German - DIN
    Learn More
    €32.34

  • DVGW GW 10-B1:2021-01

    Cathodic Protection (CP) of Buried Pipelines, Pipelines of Complex Structures and Steel Tanks - Supplement 1: Areas of Application of Experts DVGW G 100 (A) Area of Expertise IX
    1/1/2021 - PDF - German - DVGW
    Learn More
    €41.95

  • ASME BPVC.VIII.2-2021

    Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules
    1/1/2021 - Papier - English - ASME
    Learn More
    €798.00

  • ASME PTB-4-2021

    ASME Section VIII Division 1 Example Problem Manual
    1/1/2021 - PDF DRM - English - ASME
    Learn More
    €261.00

  • DIN EN 15655-2:2021-01

    Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes, German version EN 15655-2:2020
    1/1/2021 - PDF - German - DIN
    Learn More
    €79.72

  • DIN EN ISO 21809-2:2021-01

    Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO/DIS 21809-2:2020), English version prEN ISO 21809-2:2020
    1/1/2021 - PDF - English, German - DIN
    Learn More
    €148.04

  • UNE-CEN/TR 14473:2020

    Transportable gas cylinders - Porous materials for acetylene cylinders (Endorsed by Asociación Española de Normalización in January of 2021.)
    1/1/2021 - PDF - English - AENOR
    Learn More
    €90.00

  • DIN EN ISO 6259-2:2021-01

    Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI) (ISO 6259-2:2020), German version EN ISO 6259-2:2020
    1/1/2021 - PDF - German - DIN
    Learn More
    €72.80

  • ASME B16.42-2021

    Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300
    1/1/2021 - PDF DRM - English - ASME
    Learn More
    €70.00

  • NF EN 14772, E29-904 (01/2021)

    Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
    1/1/2021 - Paper - French - AFNOR
    Learn More
    €60.67

  • NF EN 1514-2/IN1, E29-902-2/IN1 (01/2021)

    Brides et leurs assemblages - Joints pour les brides désignées PN - Partie 2 : joints spiralés pour utilisation avec des brides en acier
    1/1/2021 - Paper - French - AFNOR
    Learn More
    €23.00

  • NF EN 1514-2+A1, E29-902-2 (01/2021)

    Flanges and their joints - Gaskets for PN-designated flanges - Part 2 : spiral wound gaskets for use with steel flanges
    1/1/2021 - Paper - French - AFNOR
    Learn More
    €60.67

  • NF EN 12115, T47-284 (01/2021)

    Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
    1/1/2021 - Paper - French - AFNOR
    Learn More
    €119.00

  • ASME B16.21-2021

    Nonmetallic Flat Gaskets for Pipe Flanges
    1/1/2021 - PDF DRM - English - ASME
    Learn More
    €71.00

  • DVGW GW 15:2021-01

    Field Coatings of Pipelines - Qualification of Coating Applicators
    1/1/2021 - PDF - German - DVGW
    Learn More
    €65.18

  • UNE-EN 17414-1:2020

    District cooling pipes - Factory made flexible pipe systems - Part 1: Classification, general requirements and test methods (Endorsed by Asociación Española de Normalización in January of 2021.)
    1/1/2021 - PDF - English - AENOR
    Learn More
    €74.00

  • UNE-EN 17414-2:2020

    District cooling pipes - Factory made flexible pipe systems - Part 2: Bonded system with plastic service pipes, requirements and test methods (Endorsed by Asociación Española de Normalización in January of 2021.)
    1/1/2021 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN 17414-3:2020

    District cooling pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes, requirements and test methods (Endorsed by Asociación Española de Normalización in January of 2021.)
    1/1/2021 - PDF - English - AENOR
    Learn More
    €63.00

  • UNE-EN 17415-1:2020

    District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 1: Factory made pipe assembly of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene (Endorsed by Asociación Española de Normalización in January of 2021.)
    1/1/2021 - PDF - English - AENOR
    Learn More
    €78.00

  • BS EN ISO 15876-5:2017+A1:2020

    Plastics piping systems for hot and cold water installations. Polybutene (PB) Fitness purpose of the system
    12/23/2020 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN 12493:2020

    LPG equipment and accessories. Welded steel pressure vessels for LPG road tankers. Design and manufacture
    12/23/2020 - PDF - English - BSI
    Learn More
    €348.00

  • BS EN ISO 15876-2:2017+A1:2020

    Plastics piping systems for hot and cold water installations. Polybutene (PB) Pipes
    12/23/2020 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN ISO 27509:2020

    Petroleum and natural gas industries. Compact flanged connections with IX seal ring
    12/23/2020 - PDF - English - BSI
    Learn More
    €398.00

  • SAE J 1333:2020-12-22

    Hydraulic Cylinder Rod Corrosion Test
    12/22/2020 - PDF - English - SAE
    Learn More
    €54.00

  • SAE J 1334:2020-12-22

    Hydraulic Cylinder Integrity Test
    12/22/2020 - PDF - English - SAE
    Learn More
    €79.00

  • NBN EN ISO 15494:2018/A1:2020

    Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
    12/17/2020 - PDF - French - NBN
    Learn More
    €20.00

  • NBN EN ISO 15494:2018/A1:2020

    Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
    12/17/2020 - PDF - German - NBN
    Learn More
    €20.00

  • NBN EN ISO 15494:2018/A1:2020

    Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system - Amendment 1 (ISO 15494:2015/Amd 1:2020)
    12/17/2020 - PDF - English - NBN
    Learn More
    €20.00

  • NBN EN 15655-2:2020

    Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
    12/17/2020 - PDF - French - NBN
    Learn More
    €121.00

  • NBN EN 15655-2:2020

    Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
    12/17/2020 - PDF - German - NBN
    Learn More
    €121.00

  • NBN EN 15655-2:2020

    Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
    12/17/2020 - PDF - English - NBN
    Learn More
    €121.00

  • BS EN ISO 15877-5:2009+A2:2020

    Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Fitness purpose of the system
    12/17/2020 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN ISO 22391-2:2009+A1:2020

    Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Pipes
    12/17/2020 - PDF - English - BSI
    Learn More
    €180.00

  • UNE-EN 12735-1:2020

    Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
    12/16/2020 - PDF - Spanish - AENOR
    Learn More
    €71.00

  • UNE-EN 12735-1:2020

    Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
    12/16/2020 - PDF - English - AENOR
    Learn More
    €85.20

  • BS EN 13953:2020

    LPG equipment and accessories. Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
    12/15/2020 - PDF - English - BSI
    Learn More
    €250.00

  • ASTM E273-20

    Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
    12/1/2020 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM E273-20 + Redline

    Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
    12/1/2020 - PDF - English - ASTM
    Learn More
    €61.00

  • DIN EN 13480-3/A2:2020-12

    Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A2:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €92.62

  • DIN EN 13480-3/A3:2020-12

    Metallic industrial piping - Part 3: Design and calculation, German version EN 13480-3:2017/A3:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €99.35

  • DIN EN 13476-2:2020-12

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A, German version EN 13476-2:2018+A1:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €131.96

  • DIN EN 13476-3:2020-12

    Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B, German version EN 13476-3:2018+A1:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €131.96

  • DIN EN 12569:2020-12

    Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests, German version EN 12569:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €85.79

  • ASTM D7831-20

    Standard Practice for Sampling of Tanks by Field Personnel
    12/1/2020 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM D7831-20 + Redline

    Standard Practice for Sampling of Tanks by Field Personnel
    12/1/2020 - PDF - English - ASTM
    Learn More
    €61.00

  • DIN EN 13598-1:2020-12

    Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers, German version EN 13598-1:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €104.95

  • DIN EN 13598-2:2020-12

    Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers, German version EN 13598-2:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €99.35

  • NF EN 12493, M88-716 (12/2020)

    LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture - Équipements pour GPL et leurs accessoires - Réservoirs sous pression en acier soudés des camions-citernes pour GPL - Conception et construction
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €130.67

  • DIN EN 12542:2020-12

    LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m<(hoch)3> - Design and manufacture, German version EN 12542:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €152.71

  • AD 2000-Merkblatt A 401:2020-12

    Pressure vessel equipment - Marking
    12/1/2020 - PDF - English - VDTUV
    Learn More
    €7.13

  • AD 2000-Merkblatt HP 5/3 Anlage 1:2020-12

    Non-destructive testing of welded joints - Minimum requirements for non-destructive testing methods
    12/1/2020 - PDF - English - VDTUV
    Learn More
    €11.38

  • AD 2000-Merkblatt HP 7/2:2020-12

    Heat treatment - Ferritic steels
    12/1/2020 - PDF - English - VDTUV
    Learn More
    €10.88

  • AD 2000-Merkblatt W 4:2020-12

    Tubes made from non-alloyed and alloy steels
    12/1/2020 - PDF - English - VDTUV
    Learn More
    €40.88

  • AD 2000-Merkblatt HP 3:2020-12

    Welding supervisors, welder
    12/1/2020 - - - VDTUV
    Learn More
    From: €7.83

  • AD 2000-Merkblatt HP 5/3:2020-12

    Manufacture and testing of joints - Non-destructive testing of welded joints
    12/1/2020 - - - VDTUV
    Learn More
    From: €12.96

  • NF EN 13953, M88-737 (12/2020)

    LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) - Équipements et accessoires GPL - Soupapes de sécurité des bouteilles transportables et rechargeables pour gaz de pétrole liquéfiés (GPL)
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF EN ISO 7866/A1, E29-743/A1 (12/2020)

    Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 1
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF EN ISO 20475, E29-675 (12/2020)

    Gas cylinders - Cylinder bundles - Periodic inspection and testing - Bouteilles à gaz - Cadres de bouteilles - Contrôle périodique et essais
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF EN ISO 23088, E29-703 (12/2020)

    Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €75.67

  • DIN 16282:2020-12

    Siphons for pressure gauges and their accessories
    12/1/2020 - PDF - German - DIN
    Learn More
    €65.89

  • DIN EN ISO 13088:2020-12

    Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection (ISO 13088:2011 + Amd.1:2020), German version EN ISO 13088:2012 + A1:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €85.79

  • DIN EN ISO 11755:2020-12

    Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 11755:2005), German version EN ISO 11755:2020
    12/1/2020 - PDF - German - DIN
    Learn More
    €52.90

  • DIN EN IEC 60704-2-7:2020-12

    Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans (IEC 60704-2-7:2020), German version EN IEC 60704-2-7:2020.
    12/1/2020 - PDF - German - DIN
    Learn More
    €92.62

  • NF EN ISO 15875-2/A2, T54-943-2/A2 (12/2020)

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2 : pipes - Amendment 2
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €34.67

  • NF EN ISO 15876-2/A1, T54-944-2/A1 (12/2020)

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2 : pipes - Amendment 1
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF EN ISO 15876-5/A1, T54-944-5/A1 (12/2020)

    Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5 : fitness for purpose of the system - Amendment 1
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €34.67

  • NF EN ISO 15877-2/A2, T54-014-2/A2 (12/2020)

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2 : pipes - Amendment 2
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF EN ISO 15877-5/A2, T54-014-5/A2 (12/2020)

    Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5 : fitness for purpose of the system - Amendment 2
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €34.67

  • NF EN ISO 22391-2/A1, T54-982-2/A1 (12/2020)

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2 : pipes - Amendment 1
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF EN ISO 22391-3/A1, T54-982-3/A1 (12/2020)

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : fittings - Amendment 1
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €34.67

  • NF EN ISO 22391-5/A1, T54-982-5/A1 (12/2020)

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5 : fitness for purpose of the system - Amendment 1
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €34.67

  • NF EN ISO 15875-3/A1, T54-943-3/A1 (12/2020)

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3 : fittings - Amendment 1
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF EN ISO 15875-5/A1, T54-943-5/A1 (12/2020)

    Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5 : fitness for purpose of the system - Amendment 1
    12/1/2020 - Paper - French - AFNOR
    Learn More
    €34.67

  • ASTM D2513-20

    Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
    12/1/2020 - PDF - English - ASTM
    Learn More
    €57.00

  • ASTM D2513-20 + Redline

    Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
    12/1/2020 - PDF - English - ASTM
    Learn More
    €68.00

  • ASTM D3295-20

    Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
    12/1/2020 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM D3295-20 + Redline

    Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
    12/1/2020 - PDF - English - ASTM
    Learn More
    €61.00

Items 3401 to 3600 of 15592 total

Set Ascending Direction
per page

List  Grid