23 : Fluid systems and components for general use
-
BS ISO 4405:2022
Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the gravimetric method
8/11/2022 - PDF - English -
Learn More€250.00 -
BS EN ISO 13338:2022
Gas cylinders. Gases and gas mixtures. Determination of corrosiveness for the selection of cylinder valve outlet
8/10/2022 - PDF - English -
Learn More€180.00 -
BS ISO 15086-3:2022
Hydraulic fluid power. Determination of the fluid-borne noise characteristics components and systems Measurement hydraulic impedance
8/9/2022 - PDF - English -
Learn More€293.00 -
BS EN 14912:2022
LPG equipment and accessories. Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
8/8/2022 - PDF - English -
Learn More€180.00 -
NBN EN 17649:2022
Gasinfrastruktur - Sicherheitsmanagementsystem und Rohrleitungsintegritätsmanagementsystem - Funktionale Anforderungen
8/4/2022 - PDF - German -
Learn More€163.00 -
NBN EN 17613:2022
Équipements pour gaz de pétrole liquéfié et leurs accessoires - Canalisations composites pour GPL en phase liquide et phase vapeur - Conception et fabrication
8/4/2022 - PDF - French -
Learn More€89.00 -
NBN EN 17649:2022
Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
8/4/2022 - PDF - English -
Learn More€163.00 -
CEN ISO/TS 23818-3:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material (ISO/TS 23818-3:2021)
8/4/2022 - PDF - English -
Learn More€121.00 -
NBN EN 17613:2022
Flüssiggas-Geräte und Ausrüstungsteile - Verrohrung aus Verbundwerkstoffen zum Einsatz mit LPG in der Flüssig- und Dampfdruck-Phase - Auslegung und Herstellung
8/4/2022 - PDF - German -
Learn More€89.00 -
CEN ISO/TS 23818-3:2022
Konformitätsbewertung von Kunststoffrohrleitungssystemen zur Sanierung von bestehenden Rohrleitungen - Teil 3: Weichmacherfreies Polyvinylchlorid (PVC U) (ISO/TS 23818 3:2021)
8/4/2022 - PDF - German -
Learn More€121.00 -
BS ISO 4370:2022
Environmental life cycle assessment and recycling of ductile iron pipes for water applications
8/4/2022 - PDF - English -
Learn More€250.00 -
22/30454758 DC:2022
BS EN 1092-2. Flanges and their joints. Circular flanges for pipes, valves, fittings accessories, PN designated. Part 2. Cast iron
8/4/2022 - PDF - English -
Learn More€24.00 -
NBN EN 17649:2022
Infrastructures gazières - Système de management de la sécurité (SMS) et système de management de l’intégrité des canalisations (PIMS) - Exigences fonctionnelles
8/4/2022 - PDF - French -
Learn More€163.00 -
NBN EN 17613:2022
LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
8/4/2022 - PDF - English -
Learn More€89.00 -
CEN ISO/TS 23818-2:2022
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021)
8/4/2022 - PDF - English -
Learn More€142.00 -
CEN ISO/TS 23818-2:2022
Konformitätsbewertung von Kunststoffrohrleitungssystemen zur Sanierung von bestehenden Rohrleitungen - Teil 2: Harz-Faser Verbundwerkstoff (RCF) (ISO/TS 23818 2:2021)
8/4/2022 - PDF - German -
Learn More€142.00 -
BS EN ISO 6149-1:2022
Connections for hydraulic fluid power and general use. Ports stud ends with ISO 261 metric threads O-ring sealing truncated housing seal
8/3/2022 - PDF - English -
Learn More€180.00 -
DIN EN 15632-2:2022-08
District heating pipes - Factory made flexible pipe systems - Part 2: Bonded system with plastic service pipes, requirements and test methods, German version EN 15632-2:2022.
8/1/2022 - PDF - German -
Learn More€79.72 -
DIN EN 489-1:2022-08
District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Part 1: Joint casing assemblies and thermal insulation for hot water networks in accordance with EN 13941-1, German version EN 489-1:2019
8/1/2022 - PDF - German -
Learn More€85.79 -
NF EN 10357, A49-249 (08/2022)
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
8/1/2022 - Paper - French -
Learn More€60.67 -
DIN EN 15632-4:2022-08
District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes, requirements and test methods, German version EN 15632-4:2022.
8/1/2022 - PDF - German -
Learn More€65.89 -
DIN EN 17038-2:2022-08
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units, German version EN 17038-2:2019 + AC:2021
8/1/2022 - PDF - German -
Learn More€141.96 -
NF EN 14420-4, T47-290-4 (08/2022)
Raccords pour flexibles avec demi-coquille - Partie 4 : raccordements à bride
8/1/2022 - Paper - French -
Learn More€60.67 -
NF ISO 23876, E29-800 (08/2022)
Bouteilles à gaz - Bouteilles et tubes composites - Essai par émission acoustique (EA) pour les contrôles et les essais périodiques
8/1/2022 - Paper - French -
Learn More€75.67 -
VG 85362-3:2022-08
Outer flanges and welding necks for pipes of steel - Part 3: Slip on flanges DN 20 to DN 300, Text in German and English
8/1/2022 - PDF - English, German -
Learn More€65.89 -
DIN CEN/TR 13480-7:2022-08
Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures, German version CEN/TR 13480-7:2022
8/1/2022 - PDF - German -
Learn More€68.60 -
NF EN 17613, M88-764 (08/2022)
Equipements pour gaz de pétrole liquéfié et leurs accessoires - Canalisations composites pour GPL en phase liquide et phase vapeur - Conception et fabrication
8/1/2022 - Paper - French -
Learn More€75.67 -
DIN ISO 3601-1:2022-08
Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes (ISO 3601-1:2012 + Cor. 1:2012 + Amd.1:2019), Text in German and English
8/1/2022 - PDF - English, German -
Learn More€110.00 -
DIN EN 15632-1:2022-08
District heating pipes - Factory made flexible pipe systems - Part 1: Classification, general requirements and test methods, German version EN 15632-1:2022
8/1/2022 - PDF - German -
Learn More€92.62 -
DIN EN ISO 18752:2022-08
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2022), German version EN ISO 18752:2022
8/1/2022 - PDF - German -
Learn More€85.79 -
DIN CEN/TS 17606:2022-08
Installation of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards, German version CEN/TS 17606:2021
8/1/2022 - PDF - German -
Learn More€47.66 -
PR NF EN 12285-4, E86-401-4PR (08/2022)
Réservoirs en acier fabriqués en atelier - Réservoirs verticaux cylindriques à simple et double paroi pour le stockage aérien de liquides inflammables et non inflammables polluant l'eau, en dehors du chauffage et du refroidissement des bâtiments
8/1/2022 - Paper - English, French -
Learn More€107.50 -
DIN EN 17878-1:2022-08
District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 1: Classification, general requirements and test methods, German and English version prEN 17878-1:2022
8/1/2022 - PDF - English, German -
Learn More€92.62 -
NF EN 60335-2-65/A12, C73-865/A12 (08/2022)
Household and similar electrical appliances - Safety - Part 2-65 : particular requirements for air-cleaning appliances
8/1/2022 - Paper - French -
Learn More€54.67 -
DIN EN 12245:2022-08
Transportable gas cylinders - Fully wrapped composite cylinders, German version EN 12245:2022
8/1/2022 - PDF - German -
Learn More€148.04 -
NF EN 17649, M50-034 (08/2022)
Infrastructures gazières - Système de management de la sécurité (SMS) et système de management de l'intégrité des canalisations (PIMS) - Exigences fonctionnelles
8/1/2022 - Paper - French -
Learn More€108.33 -
DIN EN 15632-3:2022-08
District heating pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes, requirements and test methods, German version EN 15632-3:2022.
8/1/2022 - PDF - German -
Learn More€72.80 -
NF EN 14420-7, T47-290-7 (08/2022)
Raccords pour flexibles avec demi-coquille - Partie 7 : raccords à cames
8/1/2022 - Paper - French -
Learn More€86.67 -
DIN EN 17038-1:2022-08
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI), German version EN 17038-1:2019 + AC:2021
8/1/2022 - PDF - German -
Learn More€99.35 -
DIN EN 12516-2:2022-08
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells, German version EN 12516-2:2014+A1:2021
8/1/2022 - PDF - German -
Learn More€201.96 -
DIN EN 14912:2022-08
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders, German version EN 14912:2022
8/1/2022 - PDF - German -
Learn More€72.80 -
NF EN 14420-2, T47-290-2 (08/2022)
Hose fittings with clamp units - Part 2 : hose side parts of hose tail
8/1/2022 - Paper - French -
Learn More€48.00 -
DIN CEN/TS 17607:2022-08
Operation, servicing, maintenance, repair and decommissioning of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards, German version CEN/TS 17607:2021
8/1/2022 - PDF - German -
Learn More€47.66 -
NF EN 60335-2-65/A2, C73-865/A2 (08/2022)
Household and similar electrical appliances - Safety - Part 2-65 : particular requirements for air-cleaning appliances
8/1/2022 - Paper - French -
Learn More€72.00 -
PR NF EN 253/A1, E39-011/A1PR (08/2022)
Tuyaux de chauffage urbain - Systèmes bloqués de tuyaux pour les réseaux d'eau chaude enterrées directement - Assemblages de tubes de service en acier manufacturés, isolation thermique en polyuréthane et tube de protection en polyéthylène
8/1/2022 - Paper - English, French -
Learn More€56.00 -
DIN EN ISO 22434:2022-08
Gas cylinders - Inspection and maintenance of valves (ISO 22434:2022), German version EN ISO 22434:2022
8/1/2022 - PDF - German -
Learn More€72.80 -
DIN EN 17877:2022-08
Dynamic mixers and agitators - Definitions and hydraulic characterizations, German and English version prEN 17877:2022
8/1/2022 - PDF - English, German -
Learn More€120.84 -
BS EN ISO 13479:2022
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
7/31/2022 - PDF - English -
Learn More€250.00 -
BS EN 12245:2022 + Redline
Tracked Changes. Transportable gas cylinders. Fully wrapped composite cylinders
7/29/2022 - PDF - English -
Learn More€454.00 -
BS EN ISO 28921-1:2022 + Redline
Tracked Changes. Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing
7/29/2022 - PDF - English -
Learn More€382.00 -
22/30447027 DC:2022
BS ISO 10468. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the ring creep properties under wet or dry conditions
7/27/2022 - PDF - English -
Learn More€24.00 -
SAE J 1065:2022-07-26
Nominal Reference Working Pressures for Steel Hydraulic Tubing
7/26/2022 - PDF - English -
Learn More€93.00 -
BS EN 15632-2:2022 + Redline
Tracked Changes. District heating pipes. Factory made flexible pipe systems Bonded system with plastic service pipes, requirements and test methods
7/25/2022 - PDF - English -
Learn More€235.00 -
BS EN 12583:2022 + Redline
Tracked Changes. Gas Infrastructure. Compressor stations. Functional requirements
7/25/2022 - PDF - English -
Learn More€454.00 -
BS EN 17476:2021+A1:2022
Specifications for dedicated liquefied petroleum gas appliances. LPG vapour pressure appliances incorporating a horizontal cartridge in the chassis
7/25/2022 - PDF - English -
Learn More€348.00 -
BS EN ISO 28921-1:2022
Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing
7/21/2022 - PDF - English -
Learn More€293.00 -
€180.00 -
UNE 53929:2022
Plastics. Rehabilitation of supply and sewerage pipes with continuous cured tubes in situ (CIPP). Design, calculation and installation
7/20/2022 - PDF - Spanish -
Learn More€93.00 -
BS EN 15632-2:2022
District heating pipes. Factory made flexible pipe systems Bonded system with plastic service pipes, requirements and test methods
7/20/2022 - PDF - English -
Learn More€180.00 -
22/30443542 DC:2022
BS EN 17878-1. District heating pipes. Factory made flexible pipe systems with a lower temperature profile Classification, general requirements and test methods
7/14/2022 - PDF - English -
Learn More€24.00 -
UNE-EN ISO 14246:2022
Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO 14246:2022)
7/13/2022 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 14246:2022
Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO 14246:2022)
7/13/2022 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 21922:2022
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)
7/13/2022 - PDF - Spanish -
Learn More€135.00 -
UNE-EN ISO 21922:2022
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)
7/13/2022 - PDF - English -
Learn More€162.00 -
NBN EN 15776:2022
Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 %
7/9/2022 - PDF - German -
Learn More€163.00 -
NBN EN 15776:2022
Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 %
7/9/2022 - PDF - English -
Learn More€163.00 -
NBN EN 15776:2022
Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 %
7/9/2022 - PDF - French -
Learn More€163.00 -
BS EN 15714-5:2022
Industrial valves. Actuators Pneumatic linear actuators for industrial Basic requirements
7/8/2022 - PDF - English -
Learn More€293.00 -
22/30457577 DC:2022
BS EN 17877. Dynamic mixers and agitators. Definitions and hydraulic characterizations
7/7/2022 - PDF - English -
Learn More€24.00 -
BS ISO 11171:2022 + Redline
Tracked Changes. Hydraulic fluid power. Calibration of automatic particle counters for liquids
7/7/2022 - PDF - English -
Learn More€454.00 -
NBN EN ISO 15874-2:2013/A2:2022
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen (PP) - Teil 2: Rohre - Änderung 2: Kerbschlagzähigkeitsprüfung (ISO 15874-2:2013/Amd 2:2022)
7/2/2022 - PDF - German -
Learn More€20.00 -
NBN EN ISO 6149-1:2022
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2022)
7/2/2022 - PDF - French -
Learn More€37.00 -
NBN EN ISO 15874-2:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
7/2/2022 - PDF - English -
Learn More€20.00 -
NBN EN ISO 15874-1:2013/A1:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
7/2/2022 - PDF - French -
Learn More€20.00 -
NBN EN ISO 15874-1:2013/A1:2022
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen (PP) - Teil 1: Allgemeines - Änderung 1: Kerbschlagzähigkeitsprüfung (ISO 15874-1:2013/Amd 1:2022)
7/2/2022 - PDF - German -
Learn More€20.00 -
NBN EN ISO 6149-1:2022
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2022)
7/2/2022 - PDF - English -
Learn More€37.00 -
NBN EN ISO 15874-1:2013/A1:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
7/2/2022 - PDF - English -
Learn More€20.00 -
NBN EN ISO 6149-1:2022
Leitungsanschlüsse für Fluidtechnik und allgemeine Anwendung - Einschraublöcher und Einschraubzapfen mit metrischem Gewinde nach ISO 261 und O-Ring-Abdichtung - Teil 1: Einschraublöcher mit Ansenkung für O-Ring-Abdichtung (ISO 6149-1:2022)
7/2/2022 - PDF - German -
Learn More€37.00 -
NBN EN ISO 15874-2:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
7/2/2022 - PDF - French -
Learn More€20.00 -
DIN EN ISO 8330:2022-07
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2022), German version EN ISO 8330:2022
7/1/2022 - PDF - German -
Learn More€110.00 -
ASTM F409-22 + Redline
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
7/1/2022 - PDF - English -
Learn More€68.00 -
DIN EN 15112:2022-07
External cathodic protection of well casings, German version EN 15112:2022
7/1/2022 - PDF - German -
Learn More€104.95 -
DIN EN 16480:2022-07
Pumps - Rotodynamic pumps - Minimum required efficiency of water pumps and determination of Minimum Efficiency Index (MEI), German version EN 16480:2021
7/1/2022 - PDF - German -
Learn More€110.00 -
NF EN 15714-5, E29-403-5 (07/2022)
Robinetterie industrielle - Actionneurs - Partie 5 : Actionneurs linéaires pneumatiques - Prescriptions de base
7/1/2022 - Paper - French -
Learn More€86.67 -
ASTM F1901-22
Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
7/1/2022 - PDF - English -
Learn More€51.00 -
ASTM D4024-22
Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
7/1/2022 - PDF - English -
Learn More€51.00 -
NF EN 12392+A1, A50-120 (07/2022)
Aluminium et alliages d'aluminium - Produits corroyés et moulés - Exigences particulières pour les produits destinés à la fabrication des appareils à pression
7/1/2022 - Paper - French -
Learn More€154.67 -
ASTM D2122-22
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
7/1/2022 - PDF - English -
Learn More€51.00 -
DIN EN ISO 4671:2022-07
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022), German version EN ISO 4671:2022
7/1/2022 - PDF - German -
Learn More€79.72 -
DIN EN 253/A1:2022-07
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene, German and English version EN 253:2019/prA1:2022
7/1/2022 - PDF - English, German -
Learn More€45.98 -
ASTM F409-22
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
7/1/2022 - PDF - English -
Learn More€57.00 -
ASTM F1901-22 + Redline
Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
7/1/2022 - PDF - English -
Learn More€61.00 -
ASTM D4024-22 + Redline
Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
7/1/2022 - PDF - English -
Learn More€61.00 -
NF EN 12392/IN1, A50-120/IN1 (07/2022)
Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
7/1/2022 - Paper - French -
Learn More€98.00 -
DIN EN ISO 3459:2022-07
Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022), German and English version EN ISO 3459:2022
7/1/2022 - PDF - English, German -
Learn More€59.63 -
DIN EN 12285-4:2022-07
Workshop fabricated steel tanks - Part 4: Vertical cylindrical single skin and double skin tanks for the aboveground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings, German and English version prEN 12285-4:2022
7/1/2022 - PDF - English, German -
Learn More€104.95 -
ASTM D2122-22 + Redline
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
7/1/2022 - PDF - English -
Learn More€61.00 -
NF EN 15776, E86-202 (07/2022)
Récipients sous pression non soumis à la flamme - Exigences pour la conception et la fabrication des récipients et parties sous pression moulés en fonte à allongement, après rupture, inférieur ou égal à 15 %
7/1/2022 - Paper - French -
Learn More€108.33 -
DIN CEN/TS 17176-3:2022-07
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings, German version CEN/TS 17176-3:2022
7/1/2022 - PDF - German -
Learn More€68.60 -
NF ISO 8133, E48-503 (07/2022)
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
7/1/2022 - Paper - French -
Learn More€75.67 -
PD CEN/TS 17176-3:2022
Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fittings
6/30/2022 - PDF - English -
Learn More€250.00 -
BS EN 12245:2022
Transportable gas cylinders - Fully wrapped composite cylinders
6/30/2022 - PDF - English -
Learn More€348.00 -
BS EN 558:2022
Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valves
6/30/2022 - PDF - English -
Learn More€348.00 -
BS EN 15632-1:2022
District heating pipes. Factory made flexible pipe systems Classification, general requirements and test methods
6/30/2022 - PDF - English -
Learn More€293.00 -
BS EN 15632-3:2022 + Redline
Tracked Changes. District heating pipes. Factory made flexible pipe systems Non bonded system with plastic service pipes, requirements and test methods
6/30/2022 - PDF - English -
Learn More€235.00 -
22/30414914 DC:2022
BS ISO 9854-2. Thermoplastics pipes for the transport of fluids. Determination Charpy impact properties Part 2. Test conditions various materials
6/29/2022 - PDF - English -
Learn More€24.00 -
BS ISO 8133:2022 + Redline
Tracked Changes. Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
6/28/2022 - PDF - English -
Learn More€326.00 -
BS EN IEC 60335-2-41:2021+A11:2021
Household and similar electrical appliances. Safety Particular requirements for pumps
6/21/2022 - PDF - English -
Learn More€293.00 -
BS EN 12583:2022
Gas Infrastructure. Compressor stations. Functional requirements
6/20/2022 - PDF - English -
Learn More€348.00 -
NBN EN ISO 13479:2022
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
6/18/2022 - PDF - French -
Learn More€121.00 -
NBN EN ISO 13338:2022
Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO 13338:2022)
6/18/2022 - PDF - English -
Learn More€58.00 -
NBN EN ISO 13479:2022
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
6/18/2022 - PDF - English -
Learn More€121.00 -
NBN EN ISO 13479:2022
Rohre aus Polyolefinen für den Transport von Fluiden - Bestimmung des Widerstandes gegen Rissfortpflanzung - Prüfverfahren für langsames Risswachstum an gekerbten Rohren (Kerbprüfung) (ISO 13479:2022)
6/18/2022 - PDF - German -
Learn More€121.00 -
NBN EN ISO 13338:2022
Gasflaschen - Gase und Gasgemische - Bestimmung der Ätzwirkung zur Auswahl von Ventilausgängen (ISO 13338:2022)
6/18/2022 - PDF - German -
Learn More€58.00 -
NBN EN ISO 13338:2022
Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO 13338:2022)
6/18/2022 - PDF - French -
Learn More€58.00 -
BS EN 15632-3:2022
District heating pipes. Factory made flexible pipe systems Non bonded system with plastic service pipes, requirements and test methods
6/17/2022 - PDF - English -
Learn More€180.00 -
BS ISO 8133:2022
Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
6/16/2022 - PDF - English -
Learn More€250.00 -
22/30441056 DC:2022
BS EN 12285-4. Workshop fabricated steel tanks Part 4. Vertical cylindrical single skin and double for the aboveground storage of flammable nonflammable water polluting liquids other than heating cooling buildings
6/16/2022 - PDF - English -
Learn More€24.00 -
22/30444825 DC:2022
BS EN 253 AMD1. District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
6/16/2022 - PDF - English -
Learn More€24.00 -
BS ISO 11171:2022
Hydraulic fluid power. Calibration of automatic particle counters for liquids
6/13/2022 - PDF - English -
Learn More€348.00 -
NBN ISO 21052:2022
Restrained joint systems for ductile iron pipelines ? Calculation rules for lengths to be restrained
6/13/2022 - PDF - French -
Learn More€121.00 -
NBN ISO 9624:2019/A1:2022
Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions — Amendment 1 ISO 9624:2019/Amd 1:2021
6/13/2022 - PDF - English -
Learn More€20.00 -
NBN ISO 21052:2022
Restrained joint systems for ductile iron pipelines — Calculation rules for lengths to be restrained ISO 21052:2021
6/13/2022 - PDF - English -
Learn More€121.00 -
BS EN IEC 60534-4:2022 + Redline
Tracked Changes. Industrial-process control valves Inspection and routine testing
6/10/2022 - PDF - English -
Learn More€382.00 -
BS ISO 20421-1:2019+A1:2022
Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing
6/10/2022 - PDF - English -
Learn More€430.00 -
UNE-EN 877:2022
Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
6/8/2022 - PDF - English -
Learn More€123.60 -
UNE-EN ISO 7233:2022
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)
6/8/2022 - PDF - English -
Learn More€68.40 -
UNE-EN 877:2022
Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
6/8/2022 - PDF - Spanish -
Learn More€103.00 -
UNE-EN ISO 7233:2022
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)
6/8/2022 - PDF - Spanish -
Learn More€57.00 -
BS EN 15632-4:2022 + Redline
Tracked Changes. District heating pipes. Factory made flexible pipe systems Bonded system with metal service pipes, requirements and test methods
6/6/2022 - PDF - English -
Learn More€235.00 -
BS EN ISO 4671:2022 + Redline
Tracked Changes. Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
6/6/2022 - PDF - English -
Learn More€326.00 -
NBN EN 14912:2022
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
6/4/2022 - PDF - German -
Learn More€58.00 -
NBN EN 14912:2022
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
6/4/2022 - PDF - English -
Learn More€58.00 -
NBN EN 14912:2022
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
6/4/2022 - PDF - French -
Learn More€58.00 -
ASTM C1818-22 + Redline
Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
6/1/2022 - PDF - English -
Learn More€61.00 -
AD 2000-Merkblatt HP 120 R:2022-06
Manufacture and testing of pressure vessels - Construction regulations - Thermoplastic piping
6/1/2022 - PDF - English -
Learn More€25.38 -
UNE-EN ISO 11439:2013/A1:2022
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1 (ISO 11439:2013/Amd 1:2021)
6/1/2022 - PDF - English -
Learn More€72.00 -
NF EN ISO 15874-2/A2, T54-938-2/A2 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2 : Pipes - Amendement 2 : Impact test (ISO 15874-2:2013/DAM 2:2021)
6/1/2022 - Paper - French -
Learn More€48.00 -
ASTM A798/A798M-22 + Redline
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
6/1/2022 - PDF - English -
Learn More€65.00 -
DIN EN ISO 13844:2022-06
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation (ISO 13844:2022), German and English version EN ISO 13844:2022
6/1/2022 - PDF - English, German -
Learn More€65.89 -
ASTM F1122-22
Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
6/1/2022 - PDF - English -
Learn More€60.00 -
DIN EN 13941-2:2022-06
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 2: Installation, German version EN 13941-2:2019+A1:2021
6/1/2022 - PDF - German -
Learn More€184.58 -
AD 2000-Merkblatt HP 110 R:2022-06
Manufacture and testing of pressure vessels - Construction regulations - Piping made of glass reinforced thermosetting plastics (GRP) with and without liner
6/1/2022 - PDF - English -
Learn More€25.38 -
PR NF EN 14570, M88-745PR (06/2022)
Équipements pour GPL et leurs accessoires - Équipement des réservoirs sous pression GPL aériens et enterrés
6/1/2022 - Paper - English, French -
Learn More€88.50 -
ASTM F2517-22e1 + Redline
Standard Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use
6/1/2022 - PDF - English -
Learn More€65.00 -
UNE-EN 15632-2:2022
District heating pipes - Factory made flexible pipe systems - Part 2: Bonded system with plastic service pipes, requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
6/1/2022 - PDF - English -
Learn More€65.00 -
NF EN ISO 6149-1, E48-050-1 (06/2022)
Raccordements pour transmissions hydrauliques et applications générales - Orifices et éléments mâles à filetage métrique ISO 261 et joint torique - Partie 1 : Orifices à joint torique dans un logement tronconique
6/1/2022 - Paper - French -
Learn More€48.00 -
NF ISO 8132, E48-501 (06/2022)
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series
6/1/2022 - Paper - French -
Learn More€75.67 -
AD 2000-Merkblatt HP 30:2022-06
Manufacture and testing of pressure vessels - Performance of pressure tests
6/1/2022 - PDF - German -
Learn More€12.50 -
UNE-EN 15632-4:2022
District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes, requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
6/1/2022 - PDF - English -
Learn More€60.00 -
ASTM E2096/E2096M-22
Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
6/1/2022 - PDF - English -
Learn More€51.00 -
ASTM C1173-22
Standard Specification for Flexible Transition Couplings for Underground Piping Systems
6/1/2022 - PDF - English -
Learn More€46.00 -
DIN EN 10344:2022-06
Malleable cast iron fittings with compression ends for steel pipes, German and English version prEN 10344:2022
6/1/2022 - PDF - English, German -
Learn More€92.62 -
ASTM F1122-22 + Redline
Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
6/1/2022 - PDF - English -
Learn More€72.00 -
ASTM C1818-22
Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
6/1/2022 - PDF - English -
Learn More€51.00 -
AD 2000-Merkblatt HP 120 R:2022-06
Manufacture and testing of pressure vessels - Construction regulations - Thermoplastic piping
6/1/2022 - PDF - German -
Learn More€17.53 -
UNE-EN ISO 11439:2013/A1:2022
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1 (ISO 11439:2013/Amd 1:2021)
6/1/2022 - PDF - Spanish -
Learn More€60.00 -
NF EN ISO 15874-1/A1, T54-938-1/A1 (06/2022)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : General - Amendment 1 : Impact test (ISO 15874-1:2013/DAM 1:2021)
6/1/2022 - Paper - French -
Learn More€25.67 -
NF EN ISO 13479, T54-909 (06/2022)
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
6/1/2022 - Paper - French -
Learn More€75.67 -
ASTM A798/A798M-22
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
6/1/2022 - PDF - English -
Learn More€54.00 -
DIN EN 14427:2022-06
LPG equipment and accessories - Transportable refillable composite cylinders for LPG - Design and construction, German version EN 14427:2022
6/1/2022 - PDF - German -
Learn More€131.96 -
UNE-EN 15632-3:2022
District heating pipes - Factory made flexible pipe systems - Part 3: Non bonded system with plastic service pipes, requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
6/1/2022 - PDF - English -
Learn More€64.00 -
NF EN ISO 13338, E29-647 (06/2022)
Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets
6/1/2022 - Paper - French -
Learn More€48.00 -
DIN EN 13941-1:2022-06
District heating pipes - Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks - Part 1: Design, German version EN 13941-1:2019+A1:2021
6/1/2022 - PDF - German -
Learn More€246.73 -
AD 2000-Merkblatt HP 110 R:2022-06
Manufacture and testing of pressure vessels - Construction regulations - Piping made of glass reinforced thermosetting plastics (GRP) with and without liner
6/1/2022 - PDF - German -
Learn More€17.53 -
PR NF EN 14585-1, E29-823-1PR (06/2022)
Tuyauteries métalliques flexibles onduleuses pour applications sous pression
6/1/2022 - Paper - English, French -
Learn More€160.50 -
AD 2000-Merkblatt HP 30:2022-06
Manufacture and testing of pressure vessels - Performance of pressure tests
6/1/2022 - PDF - English -
Learn More€18.25 -
ASTM F2517-22e1
Standard Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use
6/1/2022 - PDF - English -
Learn More€54.00 -
UNE-EN 15632-1:2022
District heating pipes - Factory made flexible pipe systems - Part 1: Classification, general requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2022.)
6/1/2022 - PDF - English -
Learn More€72.00 -
NF EN 12252, M88-715 (06/2022)
LPG equipment and accessories - Equipping of LPG road tankers
6/1/2022 - Paper - French -
Learn More€99.33 -
ASTM E2096/E2096M-22 + Redline
Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
6/1/2022 - PDF - English -
Learn More€61.00 -
ASTM C1173-22 + Redline
Standard Specification for Flexible Transition Couplings for Underground Piping Systems
6/1/2022 - PDF - English -
Learn More€53.00 -
NF EN 14912, M88-754 (06/2022)
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
6/1/2022 - Paper - French -
Learn More€48.00 -
BS EN ISO 13844:2022
Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
5/31/2022 - PDF - English -
Learn More€180.00 -
€293.00 -
NBN EN 15714-5:2022
Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
5/28/2022 - PDF - French -
Learn More€142.00 -
NBN EN ISO 28921-1:2022
Industriearmaturen - Absperrventile für die Anwendung im Tieftemperaturbereich - Teil 1: Auslegung, Fertigung und Produktionsprüfung (ISO 28921-1:2022)
5/28/2022 - PDF - German -
Learn More€142.00 -
NBN EN 15714-5:2022
Industriearmaturen - Antriebe - Teil 5: Pneumatische Antriebe - Grundanforderungen
5/28/2022 - PDF - German -
Learn More€142.00 -
NBN EN ISO 28921-1:2022
Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2022)
5/28/2022 - PDF - French -
Learn More€142.00 -
NBN EN 15714-5:2022
Industrial valves - Actuators - Part 5: Pneumatic linear actuators for industrial valves - Basic requirements
5/28/2022 - PDF - English -
Learn More€142.00 -
NBN EN ISO 28921-1:2022
Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2022)
5/28/2022 - PDF - English -
Learn More€142.00 -
22/30442175 DC:2022
BS EN 60335-2-51. Household and similar electrical appliances. Safety Part 2-51. Particular requirements for stationary circulation pumps heating service water installations
5/26/2022 - PDF - English -
Learn More€24.00 -
SAE J 1502:2022-05-26
Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic
5/26/2022 - PDF - English -
Learn More€75.00 -
22/30442123 DC:2022
BS EN 60335-2-41. Household and similar electrical appliances. Safety Part 2-41. Particular requirements for pumps
5/26/2022 - PDF - English -
Learn More€24.00 -
22/30442151 DC:2022
BS EN 60335-2-65. Household and similar electrical appliances. Safety Part 2-65. Particular requirements for air-cleaning appliances
5/26/2022 - PDF - English -
Learn More€24.00 -
SAE J 515:2022-05-26
Specification for O-Ring Materials Used with Hydraulic Connectors
5/26/2022 - PDF - English -
Learn More€101.00 -
IEC 60335-2-40:2022 CMV
IEC 60335-2-40:2022 CMV Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
5/25/2022 - PDF - English -
Learn More€978.00 -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
5/25/2022 - PDF - Spanish -
Learn More€74.00 -
UNE-EN 13476-2:2019+A1:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
5/25/2022 - PDF - Spanish -
Learn More€101.00 -
UNE-EN ISO 10619-2:2022
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
5/25/2022 - PDF - Spanish -
Learn More€63.00 -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
5/25/2022 - PDF - English -
Learn More€115.20 -
UNE-EN 13476-3:2019+A1:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
5/25/2022 - PDF - English -
Learn More€122.40 -
UNE-EN ISO 1402:2022
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2021)
5/25/2022 - PDF - Spanish -
Learn More€63.00 -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
5/25/2022 - PDF - English -
Learn More€88.80 -
UNE-EN 13476-2:2019+A1:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
5/25/2022 - PDF - English -
Learn More€121.20 -
UNE-EN ISO 10619-2:2022
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
5/25/2022 - PDF - English -
Learn More€75.60 -
IEC 60335-2-40:2022
IEC 60335-2-40:2022 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
5/25/2022 - PDF - English, French -
Learn More€489.00 -
UNE-EN ISO 1402:2022
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2021)
5/25/2022 - PDF - English -
Learn More€75.60 -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
5/25/2022 - PDF - Spanish -
Learn More€96.00 -
UNE-EN 13476-3:2019+A1:2022
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
5/25/2022 - PDF - Spanish -
Learn More€102.00
