23 : Fluid systems and components for general use ICS

DIN EN 13160-4:2025-05

Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems, German version EN 13160-4:2016+A1:2024
5/1/2025 - PDF - German - DIN
Learn More

€102.34

DIN EN ISO 5640:2025-05

Industrial valves - Mounting kits for part-turn valve actuator attachment (ISO 5640:2024), German version EN ISO 5640:2024
5/1/2025 - PDF - German - DIN
Learn More

€88.41

DIN EN 16668:2025-05

Industrial valves - Requirements and testing for metallic valves as pressure accessories, German version EN 16668:2025
5/1/2025 - PDF - German - DIN
Learn More

€130.09

DIN EN 12100:2025-05

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports, German version EN 12100:2025
5/1/2025 - PDF - German - DIN
Learn More

€54.49

Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms, German version EN 1680:2025
5/1/2025 - PDF - German - DIN
Learn More

€54.49

DIN 14420:2025-05

Fire-fighting pumps - Fire-fighting centrifugal pumps - Requirements for the suction-sided and pressure-sided assembly, test after installation in the fire-fighting vehicle
5/1/2025 - PDF - German - DIN
Learn More

€74.95

DIN EN ISO 11118:2025-05

Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2025), German version EN ISO 11118:2025
5/1/2025 - PDF - German - DIN
Learn More

€130.09

DIN 16272:2025-05

PN 250 and PN 400 valves with shut-off test connection for pressure gauges
5/1/2025 - PDF - German - DIN
Learn More

€54.49

DIN EN 16129:2025-05

Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures, German and English version prEN 16129:2025
5/1/2025 - PDF - English, German - DIN
Learn More

€254.11

DIN EN 16728:2025-05

LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection, German and English version prEN 16728:2025
5/1/2025 - PDF - English, German - DIN
Learn More

€135.89

DIN EN 17877:2025-05

Dynamic mixers and agitators - Definitions and hydraulic characterizations, German version EN 17877:2023
5/1/2025 - PDF - German - DIN
Learn More

€124.49

DIN EN ISO 10928:2025-05

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use (ISO 10928:2024), German version EN ISO 10928:2025
5/1/2025 - PDF - German - DIN
Learn More

€102.34

DIN 16287:2025-05

Sealing caps and protective hoods for test connections on valves and cocks for pressure gauges
5/1/2025 - PDF - German - DIN
Learn More

€47.38

DIN 16283:2025-05

Adjusting nuts for pressure gauges and their accessories
5/1/2025 - PDF - German - DIN
Learn More

€40.56

DIN 16284:2025-05

Nipple connections for pressure gauges and their accessories
5/1/2025 - PDF - German - DIN
Learn More

€47.38

DIN EN 549/A3:2025-05

Rubber materials for seals and diaphragms for gas appliances and gas equipment, German and English version EN 549:2019+A2:2024/prA3:2025
5/1/2025 - PDF - English, German - DIN
Learn More

€54.49

24/30456247 DC:2025

BS ISO 17104 Rotary tools for threaded fasteners - Impulse and impulsing tools - Performance test method
4/18/2025 - PDF - English - BSI
Learn More

€24.00

ISO/DIS 23802:2025

Gas cylinders — Seamless tubes, composite tubes and large tubes permanently mounted in a frame — Periodic inspection and testing
4/17/2025 - Papier - English - ISO
Learn More

€75.00

25/30495155 DC:2025

BS EN 549:2019+A2:2024/prA3 Rubber materials for seals and diaphragms for gas appliances and gas equipment
4/17/2025 - PDF - English - BSI
Learn More

€24.00

UNE-EN 12735-2:2025

Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
4/16/2025 - - - AENOR
Learn More

From: €76.00

ISO/DIS 15783:2025

Seal-less rotodynamic pumps — Class II — Specification
4/15/2025 - Papier - English - ISO
Learn More

€75.00

NBN ISO 21036:2025

Plastics piping systems for industrial applications — Unplasticized polyamide (PA-U) — Metric series for specifications for components and system
4/9/2025 - PDF - English - NBN
Learn More

€58.00

UNE-EN 334:2021+A1:2025

Gas pressure regulators for inlet pressure up to 10 MPa (100 bar)
4/9/2025 - - - AENOR
Learn More

From: €154.00

ISO/DIS 24131-4:2025

Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods
4/9/2025 - Papier - English - ISO
Learn More

€75.00

25/30497281 DC:2025

Draft BS ISO 24131-4 Internal protection by polymeric lining for ductile iron pipes - Requirements and test methods Part 4: ceramic epoxy
4/9/2025 - PDF - English - BSI
Learn More

€24.00

BS ISO 4076:2025

Polyphenylsulfone (PPSU). Effect of time and temperature on expected strength
4/9/2025 - PDF - English - BSI
Learn More

€191.00

BS EN 488-1:2025 + Redline

Tracked Changes. District heating pipes. Bonded single pipe systems for directly buried hot water networks Factory made steel shut-off valve assembly service pipes, polyurethane thermal insulation and a casing of polyethylene
4/7/2025 - PDF - English - BSI
Learn More

€373.00

BS EN 12100:2025 + Redline

Tracked Changes. Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports
4/7/2025 - PDF - English - BSI
Learn More

€227.00

BS EN 12900:2025 + Redline

Tracked Changes. Refrigerant compressors. Rating conditions, tolerances and presentation of performance data
4/7/2025 - PDF - English - BSI
Learn More

€269.00

ISO/DIS 13272:2025

Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
4/7/2025 - Papier - English - ISO
Learn More

€75.00

ISO/DIS 3601-2:2025

Fluid power systems — O-rings
4/5/2025 - - - ISO
Learn More

€75.00

ISO 4076:2025

Polyphenylsulfone (PPSU) — Effect of time and temperature on expected strength
4/4/2025 - Papier - English - ISO
Learn More

€75.00

25/30500990 DC:2025

BS EN 12666-1 Plastics piping systems for non-pressure underground drains and sewers - Polyethylene (PE) Part 1: Specifications pipes, fittings the system
4/3/2025 - PDF - English - BSI
Learn More

€24.00

BS ISO 6362-6:2025 + Redline

Tracked Changes. Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Tolerances on form dimensions for round, square, rectangular hexagonal
4/3/2025 - PDF - English - BSI
Learn More

€373.00

UNE-EN ISO 15995:2021/A1:2025

Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated - Amendment 1 (ISO 15995:2021/Amd 1:2024)
4/2/2025 - PDF - Spanish - AENOR
Learn More

€69.00

UNE-EN ISO 13351:2025

Fans - Dimensions (ISO 13351:2024)
4/2/2025 - PDF - Spanish - AENOR
Learn More

€69.00

UNE-EN ISO 21012:2025

Cryogenic vessels - Hoses (ISO 21012:2024)
4/2/2025 - - - AENOR
Learn More

From: €82.00

DIN EN 13160-7:2025-04

Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets, German version EN 13160-7:2016+A1:2024
4/1/2025 - PDF - German - DIN
Learn More

€124.49

PR NF EN ISO 22109, E29-410PR (04/2025)

Robinetterie industrielle - Réducteur pour appareil de robinetterie
4/1/2025 - Papier - English, French - AFNOR
Learn More

€83.00

PR NF EN ISO 5210, E29-401PR (04/2025)

Robinetterie industrielle - Raccordement des actionneurs multitours
4/1/2025 - Papier - English, French - AFNOR
Learn More

€91.50

PR NF EN ISO 5211, E29-402PR (04/2025)

Robinetterie industrielle - Raccordement des actionneurs à fraction de tour
4/1/2025 - Papier - English, French - AFNOR
Learn More

€111.00

ISO/DIS 11300-2:2025

Piping systems for rehabilitation of underground drains, sewers and water supply networks
4/1/2025 - - - ISO
Learn More

€75.00

DIN 35913:2025-04

Valves for drinking water installations in buildings - Level-controlled shut-off valves in drinking water installations - Requirements and tests
4/1/2025 - PDF - German - DIN
Learn More

€54.49

DIN EN 13828:2025-04

Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements, German version EN 13828:2025
4/1/2025 - PDF - German - DIN
Learn More

€102.34

DIN 19573:2025-04

Mortar for construction and rehabilitation of drains and sewers outside buildings
4/1/2025 - PDF - German - DIN
Learn More

€157.29

DIN EN 12666-1:2025-04

Plastics piping systems for non-pressure underground drains and sewers - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system, German and English version prEN 12666-1:2025
4/1/2025 - PDF - English, German - DIN
Learn More

€118.79

DIN 14423:2025-04

Firefighting and fire protection - Sieves for pumps and reservoirs for firefighting
4/1/2025 - PDF - German - DIN
Learn More

€47.38

DIN EN 17038-3:2025-04

Pumps - Methods of qualification of the Energy Efficiency Index for rotordynamic pump units - Part 3: Testing and calculation of energy efficiency index (EEI) of booster sets, German and English version prEN 17038-3:2024
4/1/2025 - PDF - English, German - DIN
Learn More

€152.52

DIN EN 18183:2025-04

Pumps - Specification for Gland Packings manufactured from Yarns and Ribbons, German and English version prEN 18183:2025
4/1/2025 - PDF - English, German - DIN
Learn More

€74.95

DIN CEN/TS 16765:2025-04

LPG equipment and accessories - Environmental and climate change considerations for CEN/TC 286 standards, German version CEN/TS 16765:2025
4/1/2025 - PDF - German - DIN
Learn More

€59.91

DIN EN IEC 61514-2:2025-04

Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly (IEC 65B/1257/CDV:2024), German and English version prEN IEC 61514-2:2024
4/1/2025 - PDF - English, German - DIN
Learn More

€146.26

25/30509623 DC:2025

BS EN ISO 14245:2021/Amd 1 Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing. Amendment 1
4/1/2025 - PDF - English - BSI
Learn More

€24.00

PR NF EN ISO 14246/A1, E29-694/A1PR (04/2025)

Bouteilles à gaz - Robinets de bouteilles à gaz - Essais de fabrication et contrôles - Amendement 1
4/1/2025 - Papier - English, French - AFNOR
Learn More

€58.00

ISO 14245:2021/DAmd 1:2025

Gas cylinders — Specifications and testing of LPG cylinder valves — Self-closing
4/1/2025 - - - ISO
Learn More

€21.00

DIN EN 17962:2025-04

Valves and fittings for buildings and devices to prevent pollution by backflow of potable water - Polymer parts and housings under internal pressure and without external loads, German version EN 17962:2024
4/1/2025 - PDF - German - DIN
Learn More

€61.40

DIN 14381:2025-04

Firefighting and fire protection - Pressure valve type B PN 16 - Self-locking
4/1/2025 - PDF - German - DIN
Learn More

€54.49

DIN EN ISO 20421-1:2025-04

Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 1: Design, fabrication, inspection and testing (ISO/DIS 20421-1:2025), German and English version prEN ISO 20421-1:2025
4/1/2025 - PDF - English, German - DIN
Learn More

€241.03

DIN EN ISO 21013-3:2025-04

Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO/DIS 21013-3:2025), German and English version prEN ISO 21013-3:2025
4/1/2025 - PDF - English, German - DIN
Learn More

€118.79

PR NF EN ISO 21013-3, E86-512-3PR (04/2025)

Récipients cryogéniques - Dispositifs de sécurité pour le service cryogénique - Partie 3 : Détermination de la taille et du volume
4/1/2025 - Papier - English, French - AFNOR
Learn More

€119.00

PR NF EN ISO 20421-1, E86-502-1PR (04/2025)

Récipients cryogéniques - Grands récipients transportables isolés sous vide - Partie 1 : conception, fabrication, inspection et essais
4/1/2025 - Papier - English, French - AFNOR
Learn More

€200.00

DIN EN 12583:2025-04

Gas Infrastructure - Compressor stations - Functional requirements, German version EN 12583:2022+A1:2024.
4/1/2025 - PDF - German - DIN
Learn More

€152.52

DIN EN ISO 11295:2025-04

Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO/DIS 11295:2025), German and English version prEN ISO 11295:2025
4/1/2025 - PDF - English, German - DIN
Learn More

€174.30

BS ISO 18553:2025 + Redline

Tracked Changes. Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
4/1/2025 - PDF - English - BSI
Learn More

€373.00

DIN ISO 21360-1:2025-04

Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 1: General description (ISO 21360-1:2020)
4/1/2025 - PDF - German - DIN
Learn More

€102.34

DIN EN 1254-8:2025-04

Copper and copper alloys - Plumbing fittings - Part 8: Press fittings for use with plastics and multilayer pipes, German version EN 1254-8:2021+A1:2025
4/1/2025 - PDF - German - DIN
Learn More

€108.13

DIN EN 1254-3:2025-04

Copper and copper alloys - Plumbing fittings - Part 3: Compression fittings for use with plastics and multilayer pipes, German version EN 1254-3:2021+A1:2025
4/1/2025 - PDF - German - DIN
Learn More

€108.13

DIN EN 1254-6:2025-04

Copper and copper alloys - Plumbing fittings - Part 6: Push-fit fittings for use with metallic tubes, plastics and multilayer pipes, German version EN 1254-6:2021+A1:2025
4/1/2025 - PDF - German - DIN
Learn More

€102.34

DIN EN 1254-20:2025-04

Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information, German version EN 1254-20:2021+A1:2025
4/1/2025 - PDF - German - DIN
Learn More

€152.52

DIN 11853-1:2025-04

Stainless steel components for hygienic applications in the food industry - Part 1: Connections
4/1/2025 - PDF - German - DIN
Learn More

€108.13

DIN 11853-2:2025-04

Stainless steel components for hygienic applications in the food industry - Part 2: Flange connections
4/1/2025 - PDF - German - DIN
Learn More

€102.34

DIN 11853-3:2025-04

Stainless steel components for hygienic applications in the food industry - Part 3: Clamp connections
4/1/2025 - PDF - German - DIN
Learn More

€102.34

DIN 11864-1:2025-04

Stainless steel components for aseptic applications in the chemical and the pharmaceutical industries - Part 1: Connections
4/1/2025 - PDF - German - DIN
Learn More

€113.27

DIN 11864-3:2025-04

Stainless steel components for aseptic applications in the chemical and the pharmaceutical industries - Part 3: Clamp connections
4/1/2025 - PDF - German - DIN
Learn More

€113.27

VG 95922-9:2025-04

Hose assemblies - Part 9: Low-temperature hose assemblies for fluid power service, detail standard, Text in German and English
4/1/2025 - PDF - English, German - DIN
Learn More

€118.79

ASTM E2226-25

Standard Practice for Application of Hose Stream
4/1/2025 - PDF - English - ASTM
Learn More

€69.00

ASTM E2226-25 + Redline

Standard Practice for Application of Hose Stream
4/1/2025 - PDF - English - ASTM
Learn More

€83.00

PR NF D36-116, D36-116PR (04/2025)

Installations de gaz - Raccords Isolants
4/1/2025 - Papier - French - AFNOR
Learn More

€46.50

BS EN 488-1:2025

District heating pipes. Bonded single pipe systems for directly buried hot water networks Factory made steel shut-off valve assembly service pipes, polyurethane thermal insulation and a casing of polyethylene
3/31/2025 - PDF - English - BSI
Learn More

€266.00

BS EN 488-2:2025

District heating and district cooling pipes. Bonded pipe systems for directly buried hot cold water networks Factory made steel service valve assembly pipes, polyurethane thermal insulation a casing of polyethylene
3/31/2025 - PDF - English - BSI
Learn More

€191.00

BS ISO 6362-6:2025

Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Tolerances on form dimensions for round, square, rectangular hexagonal
3/31/2025 - PDF - English - BSI
Learn More

€266.00

ISO/DIS 11300-1:2025

Piping systems for rehabilitation of underground drains, sewers and water supply networks
3/29/2025 - - - ISO
Learn More

€75.00

ISO/DIS 11300-3:2025

Piping systems for rehabilitation of underground drains, sewers and water supply networks
3/29/2025 - - - ISO
Learn More

€75.00

BS EN 448:2025 + Redline

Tracked Changes. District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
3/28/2025 - PDF - English - BSI
Learn More

€438.00

BS EN 15698-1:2025 + Redline

Tracked Changes. District heating pipes. Bonded twin pipe systems for directly buried hot water networks Factory made assembly of steel service pipes, polyurethane thermal insulation and one casing polyethylene
3/28/2025 - PDF - English - BSI
Learn More

€269.00

ISO 6362-6:2025

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles
3/28/2025 - Papier - English - ISO
Learn More

€113.00

BS EN 12900:2025

Refrigerant compressors. Rating conditions, tolerances and presentation of performance data
3/28/2025 - PDF - English - BSI
Learn More

€191.00

NBN EN 12900:2025

Refrigerant compressors - Rating conditions, tolerances and presentation of performance data
3/27/2025 - - - NBN
Learn More

€121.00

UNE-EN 14382:2021+A1:2025

Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar)
3/26/2025 - PDF - Spanish - AENOR
Learn More

€129.00

UNE-EN ISO 8028:2025

Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2024)
3/26/2025 - - - AENOR
Learn More

From: €61.00

BS EN 12100:2025

Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports
3/25/2025 - PDF - English - BSI
Learn More

€162.00

BS EN 448:2025

District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
3/25/2025 - PDF - English - BSI
Learn More

€312.00

BS EN 15698-1:2025

District heating pipes. Bonded twin pipe systems for directly buried hot water networks Factory made assembly of steel service pipes, polyurethane thermal insulation and one casing polyethylene
3/25/2025 - PDF - English - BSI
Learn More

€191.00

BS ISO 18553:2025

Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
3/25/2025 - PDF - English - BSI
Learn More

€266.00

ISO/DIS 24690:2025

Glass reinforced thermosetting plastic (GRP) pipes — Test method for determination of long-term pressure endurance strength
3/21/2025 - Papier - English - ISO
Learn More

€75.00

NBN EN 12100:2025

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
3/20/2025 - - - NBN
Learn More

€58.00

NBN EN 488-1:2025

District heating pipes - Bonded single pipe systems for directly buried hot water networks - Part 1: Factory made steel shut-off valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene
3/20/2025 - - - NBN
Learn More

€142.00

NBN EN 15698-1:2025

District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
3/20/2025 - - - NBN
Learn More

€89.00

NBN EN 15698-2:2025

District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
3/20/2025 - - - NBN
Learn More

€89.00

NBN EN 488-2:2025

District heating and district cooling pipes - Bonded pipe systems for directly buried hot and cold water networks - Part 2: Factory made steel service valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene
3/20/2025 - - - NBN
Learn More

€89.00

NBN EN 448:2025

District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
3/20/2025 - - - NBN
Learn More

€142.00

BS EN 1680:2025 + Redline

Tracked Changes. Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanisms
3/19/2025 - PDF - English - BSI
Learn More

€227.00

BS EN 13828:2025 + Redline

Tracked Changes. Building valves. Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements
3/19/2025 - PDF - English - BSI
Learn More

€373.00

UNE-EN IEC 60335-2-40:2025

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
3/19/2025 - PDF - Spanish - AENOR
Learn More

€175.00

UNE-EN IEC 60335-2-40:2025/A11:2025

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
3/19/2025 - PDF - Spanish - AENOR
Learn More

€72.00

BS ISO 24477:2025 + Redline

Tracked Changes. Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for spinning rotor gauges
3/19/2025 - PDF - English - BSI
Learn More

€269.00

ISO 18553:2025

Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
3/18/2025 - - - ISO
Learn More

€113.00

IEC 60879:2019/AMD1:2025

IEC 60879:2019/AMD1:2025 Amendment 1 - Comfort fans and regulators for household and similar purposes - Methods for measuring performance
3/17/2025 - PDF - English, French - IEC
Learn More

€23.00

IEC 60879:2019+AMD1:2025 Edition 2.1

IEC 60879:2019+AMD1:2025 (Consolidated version) Comfort fans and regulators for household and similar purposes - Methods for measuring performance
3/17/2025 - - - IEC
Learn More

From: €133.00

BS ISO 24477:2025

Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for spinning rotor gauges
3/17/2025 - PDF - English - BSI
Learn More

€191.00

ASTM A587/A587M-25

Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
3/15/2025 - PDF - English - ASTM
Learn More

€69.00

ASTM A587/A587M-25 + Redline

Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
3/15/2025 - PDF - English - ASTM
Learn More

€83.00

ASTM F1962-25

Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
3/15/2025 - PDF - English - ASTM
Learn More

€76.00

ASTM F1962-25 + Redline

Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
3/15/2025 - PDF - English - ASTM
Learn More

€91.00

ISO 24477:2025

Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges
3/12/2025 - Papier - English - ISO
Learn More

€75.00

NBN ISO 10803:2025

Design method for ductile iron pipes
3/11/2025 - PDF - English - NBN
Learn More

€166.00

NBN ISO 16358-1:2025

Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performance factors — Part 1: Cooling seasonal performance factor
3/11/2025 - PDF - English - NBN
Learn More

€124.00

NBN ISO 16358-1:2013/A1:2025

Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performance factors — Part 1: Cooling seasonal performance factor — Amendment 1
3/11/2025 - PDF - English - NBN
Learn More

€124.00

NBN ISO 16358-1:2013/A2:2025

Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performance factors — Part 1: Cooling seasonal performance factor — Amendment 2
3/11/2025 - PDF - English - NBN
Learn More

€20.00

PD CEN/TS 17152-4:2024

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Boxes used infiltration, attenuation Guidance structural design modular
3/10/2025 - PDF - English - BSI
Learn More

€266.00

PD CEN/TS 17152-3:2022

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Boxes used infiltration, attenuation Assessment conformity
3/10/2025 - PDF - English - BSI
Learn More

€191.00

BS EN 1680:2025

Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanisms
3/7/2025 - PDF - English - BSI
Learn More

€162.00

NBN EN 1680:2025

Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms
3/6/2025 - - - NBN
Learn More

€58.00

25/30488777 DC:2025

BS EN ISO 11295 Plastics piping systems used for the rehabilitation of pipelines -Classification and overview of strategic, tactical and operational activities
3/6/2025 - PDF - English - BSI
Learn More

€24.00

ISO/DIS 11295:2025

Plastics piping systems used for the rehabilitation of pipelines — Classification and overview of strategic, tactical and operational activities
3/6/2025 - - - ISO
Learn More

€75.00

PD CEN/TR 17924:2025 + Redline

Tracked Changes. Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. Guidance on hydrogen specific aspects
3/4/2025 - PDF - English - BSI
Learn More

€559.00

ISO/DIS 10471:2025

Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
3/4/2025 - Papier - English - ISO
Learn More

€75.00

BS EN ISO 10928:2025

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
3/3/2025 - PDF - English - BSI
Learn More

€266.00

NF EN 448, E39-012 (03/2025)

Tuyaux de chauffage urbain - Systèmes bloqués monotubes pour les réseaux d'eau chaude enterrés directement - Assemblages de raccords manufacturés pour tubes de service en acier, isolation thermique en polyuréthane et tube de protection en polyéthylène
3/1/2025 - Papier - French - AFNOR
Learn More

€92.50

NF EN 488-1, E39-013-1 (03/2025)

Tuyaux de chauffage urbain - Systèmes bloqués monotubes pour les réseaux d'eau chaude enterrés directement - Partie 1 : assemblage d'appareils de robinetterie d'arrêt en acier manufacturés pour tubes de service en acier, isolation thermique en polyuréthane et enveloppe en polyéthylène
3/1/2025 - Papier - French - AFNOR
Learn More

€80.50

NF EN 12100, T54-930 (03/2025)

Systèmes de canalisations en plastiques - Robinets en polyéthylène (PE) - Méthode d'essai de résistance à la flexion entre supports
3/1/2025 - Papier - French - AFNOR
Learn More

€44.50

DIN EN 12201-4:2025-03

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems, German version EN 12201-4:2024
3/1/2025 - PDF - German - DIN
Learn More

€95.42

DIN EN ISO 22109:2025-03

Industrial valves - Gearbox for valves (ISO/DIS 22109:2025), German and English version prEN ISO 22109:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€82.15

DIN EN ISO 5211:2025-03

Industrial valves - Part-turn actuator attachments (ISO/DIS 5211:2025), German and English version prEN ISO 5211:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€108.13

NF ISO 15086-2, E48-392-2 (03/2025)

Transmissions hydrauliques - Évaluation des caractéristiques du bruit liquidien des composants et systèmes - Partie 2 : mesurage de la vitesse du son émis dans un fluide dans une tuyauterie
3/1/2025 - Papier - French - AFNOR
Learn More

€89.00

DIN 6625-1:2025-03

Angular steel tanks for above ground storage of liquids with a flashpoint of more than 55 °C - Part 1: Principles for installation and test
3/1/2025 - PDF - German - DIN
Learn More

€54.49

DIN 6625-2:2025-03

Angular steel tanks for above ground storage of liquids with a flashpoint of more than 55 °C - Part 2: Calculation
3/1/2025 - PDF - German - DIN
Learn More

€47.38

DIN EN 13160-5:2025-03

Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems, German version EN 13160-5:2016+A1:2024
3/1/2025 - PDF - German - DIN
Learn More

€157.29

DIN EN ISO 11300-2:2025-03

Piping systems for rehabilitation of underground drains, sewers and water supply networks - Part 2: Thermoset composite materials (ISO/DIS 11300-2:2025), German and English version prEN ISO 11300-2:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€162.80

PR NF EN 13385, E29-780PR (03/2025)

Bouteilles à gaz transportables - Véhicules-batteries, pour gaz permanents et liquéfiés (sauf acétylène) - Contrôle au moment du remplissage
3/1/2025 - Papier - English, French - AFNOR
Learn More

€66.50

PR NF EN 13001-3-6, E52-013-6PR (03/2025)

Appareils de levage à charge suspendue - Conception générale - Partie 3-6 : États limites et vérification d'aptitude des éléments de mécanismes - Vérins hydrauliques
3/1/2025 - Papier - English, French - AFNOR
Learn More

€142.50

PR NF EN 13807, E29-735PR (03/2025)

Bouteilles à gaz transportables - Véhicules-batteries et conteneurs à gaz à éléments multiples (CGEM) - Conception, fabrication, identification et essai
3/1/2025 - Papier - English, French - AFNOR
Learn More

€100.50

XP CEN/TS 16765, M88-765 (03/2025)

Équipements pour GPL et leurs accessoires - Considérations environnementales et liées au changement climatique pour les normes du CEN/TC 286
3/1/2025 - Papier - French - AFNOR
Learn More

€70.50

NF EN 488-2, E39-013-2 (03/2025)

Tuyaux de chauffage urbain et réseaux d'eau glacée - Systèmes bloqués de tuyaux préisolés pour les réseaux d'eau chaude et froide enterrés directement - Partie 2 : assemblage d'appareils de robinetterie de service en acier manufacturés pour tubes de service en acier, isolation thermique en polyuréthane et enveloppe en polyéthylène
3/1/2025 - Papier - French - AFNOR
Learn More

€56.50

NF EN 15698-2, E39-017-2 (03/2025)

Tuyaux de chauffage urbain - Systèmes bloqués de bitubes pour les réseaux d'eau chaude enterrés directement - Partie 2 : assemblages de raccords et d'appareils de robinetterie manufacturés pour tubes de service en acier, isolation thermique en polyuréthane et tube de protection en polyéthylène
3/1/2025 - Papier - French - AFNOR
Learn More

€70.50

NF EN 15698-1, E39-017-1 (03/2025)

Tuyaux de chauffage urbain - Systèmes bloqués de bitubes préisolés pour les réseaux d'eau chaude enterrés directement - Partie 1 : assemblage de bitubes manufacturés pour tubes de service en acier, isolation thermique en polyuréthane et tube de protection en polyéthylène
3/1/2025 - Papier - French - AFNOR
Learn More

€70.50

DIN EN 17878-1:2025-03

District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 1: Classification, general requirements and test methods, German version EN 17878-1:2024.
3/1/2025 - PDF - German - DIN
Learn More

€95.42

DIN EN 17878-3:2025-03

District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 3: Requirements and test methods for non bonded systems with plastic service pipes, German version EN 17878-3:2024.
3/1/2025 - PDF - German - DIN
Learn More

€82.15

DIN EN 17878-2:2025-03

District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 2: Requirements and test methods for bonded systems with plastic service pipes, German version EN 17878-2:2024.
3/1/2025 - PDF - German - DIN
Learn More

€82.15

PR NF ISO 3601-2, E48-550PR (03/2025)

Transmissions hydrauliques et pneumatiques - Joints toriques - Partie 2 : Dimensions des logements pour applications générales
3/1/2025 - Papier - English, French - AFNOR
Learn More

€147.50

DIN EN 16631:2025-03

LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Reconditioning requirements, German version EN 16631:2025
3/1/2025 - PDF - German - DIN
Learn More

€74.95

DIN EN ISO 14246/A1:2025-03

Gas cylinders - Cylinder valves - Manufacturing tests and examinations - Amendment 1 (ISO 14246:2022/DAM 1:2025), German and English version EN ISO 14246:2022/prA1:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€40.56

PR NF EN 12186, M50-016PR (03/2025)

Infrastructures gazières - Postes de détente régulation de pression de gaz pour le transport et la distribution - Prescriptions fonctionnelles
3/1/2025 - Papier - English, French - AFNOR
Learn More

€128.50

ASTM A214/A214M-25

Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
3/1/2025 - PDF - English - ASTM
Learn More

€61.00

ASTM A214/A214M-25 + Redline

Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
3/1/2025 - PDF - English - ASTM
Learn More

€73.00

ASTM A450/A450M-25

Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
3/1/2025 - PDF - English - ASTM
Learn More

€69.00

ASTM A450/A450M-25 + Redline

Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
3/1/2025 - PDF - English - ASTM
Learn More

€83.00

PR NF ISO 13347-3, E51-006-3PR (03/2025)

Ventilateurs - Détermination des niveaux de puissance acoustique des ventilateurs dans des conditions de laboratoire normalisées - Partie 3 : Méthodes de la surface enveloppante
3/1/2025 - Papier - English, French - AFNOR
Learn More

€100.50

DIN EN 12201-1:2025-03

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General, German version EN 12201-1:2024.
3/1/2025 - PDF - German - DIN
Learn More

€102.34

DIN EN 12201-2:2025-03

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes, German version EN 12201-2:2024.
3/1/2025 - PDF - German - DIN
Learn More

€102.34

DIN EN 12201-3:2025-03

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings, German version EN 12201-3:2024 + AC:2024.
3/1/2025 - PDF - German - DIN
Learn More

€124.49

DIN EN 12201-5:2025-03

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system, German version EN 12201-5:2024.
3/1/2025 - PDF - German - DIN
Learn More

€74.95

DIN CEN/TS 17670-3:2025-03

Plastics piping systems for non-pressure underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Assessment of conformity, German version CEN/TS 17670-3:2024
3/1/2025 - PDF - German - DIN
Learn More

€76.17

DIN EN ISO 11300-3:2025-03

Piping systems for rehabilitation of underground drains, sewers and water supply networks - Part 3: Unplasticized poly (vinyl chloride) (PVC-U) material (ISO/DIS 11300-3:2025), German and English version prEN ISO 11300-3:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€102.34

DIN EN ISO 11300-1:2025-03

Piping systems for rehabilitation of underground drains, sewers and water supply networks - Part 1: Polyethylene (PE) material (ISO/DIS 11300-1:2025), German and English version prEN ISO 11300-1:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€140.93

DIN EN ISO 11301-1:2025-03

Piping systems for rehabilitation of underground gas supply networks - Part 1: Polyethylene (PE) material (ISO/DIS 11301-1:2025), German and English version prEN ISO 11301-1:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€130.09

DIN EN ISO 2507:2025-03

Thermoplastics pipes and fittings - Vicat softening temperature: General test method and test conditions for Vinyl chloride - based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile - based (ABS, ASA) pipes and fittings (ISO/DIS 2507:2025), German and English version prEN ISO 2507:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€88.41

DIN EN ISO 5210:2025-03

Industrial valves - Multi-turn actuator attachments (ISO/DIS 5210:2025), German and English version prEN ISO 5210:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€95.42

PR NF EN ISO 11300-1, P16-364-1PR (03/2025)

Systèmes de canalisations pour la réhabilitation des branchements, des collecteurs d'assainissement et des réseaux d'alimentation en eau enterrés - Partie 1 : Matériau polyéthylène (PE)
3/1/2025 - Papier - English, French - AFNOR
Learn More

€142.50

PR NF EN ISO 11300-3, P16-364-3PR (03/2025)

Systèmes de canalisations pour la réhabilitation des branchements, des collecteurs d'assainissement et des réseaux d'alimentation en eau enterrés - Partie 3: Matériau poly(chlorure de vinyle) non plastifié (PVC U)
3/1/2025 - Papier - English, French - AFNOR
Learn More

€100.50

ASTM F3253-25

Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
3/1/2025 - PDF - English - ASTM
Learn More

€76.00

ASTM F3253-25 + Redline

Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
3/1/2025 - PDF - English - ASTM
Learn More

€91.00

ASTM D2444-25

Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
3/1/2025 - PDF - English - ASTM
Learn More

€69.00

ASTM D2444-25 + Redline

Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
3/1/2025 - PDF - English - ASTM
Learn More

€83.00

ASTM F714-25

Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
3/1/2025 - PDF - English - ASTM
Learn More

€69.00

ASTM F714-25 + Redline

Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
3/1/2025 - PDF - English - ASTM
Learn More

€83.00

ASTM F2263-25

Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
3/1/2025 - PDF - English - ASTM
Learn More

€69.00

ASTM F2263-25 + Redline

Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
3/1/2025 - PDF - English - ASTM
Learn More

€83.00

ASTM F2929-25

Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
3/1/2025 - PDF - English - ASTM
Learn More

€76.00

ASTM F2929-25 + Redline

Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
3/1/2025 - PDF - English - ASTM
Learn More

€91.00

PR NF EN ISO 11300-2, P16-364-2PR (03/2025)

Systèmes de canalisations pour la réhabilitation des branchements, des collecteurs d'assainissement et des réseaux d'alimentation en eau enterrés - Partie 2 : matériaux composites thermodurcissables
3/1/2025 - Papier - English, French - AFNOR
Learn More

€152.50

PR NF EN 15383, P16-372PR (03/2025)

Systèmes de canalisations en plastique pour les branchements et collecteurs d'assainissement - Plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester (UP) - Regards et boîtes de branchement et d'inspection
3/1/2025 - Papier - English, French - AFNOR
Learn More

€100.50