21 : Mechanical systems and components for general use
-
UNE-EN 1515-4:2021/AC:2022
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
10/5/2022 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 1515-4:2021/AC:2022
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
10/5/2022 - PDF - English - AENOR
Learn More€0.00 -
DIN 908 Berichtigung 1:2021-11
Internal drive screw plugs with collar - Cylindrical thread, Corrigendum 1
11/1/2021 - PDF - German - DIN
Learn More€0.00 -
DIN 4000-210 Berichtigung 1:2021-07
Tabular layouts of properties - Part 210: Cutting machine tools, Corrigendum 1
7/1/2021 - PDF - German - DIN
Learn More€0.00 -
VDI/VDE 2610 Berichtigung:2021-07
Exchange format for gear data - Gear Data Exchange Format (GDE Format) - Definition - Corrigendum concerning standard VDI/VDE 2610:2021-03
7/1/2021 - PDF - English, German - VDI
Learn More€0.00 -
DIN 13-7 Berichtigung 1:2019-08
ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads, Nominal diameter from 17 mm to 300 mm, Corrigendum 1
8/1/2019 - PDF - German - DIN
Learn More€0.00 -
€0.00
-
€0.00
-
DIN 71803 Berichtigung 1:2019-06
Angle joints with screw studs, with rivet studs, Corrigendum 1
6/1/2019 - PDF - German - DIN
Learn More€0.00 -
DIN 31652-2 Berichtigung 1:2019-04
Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 2: Functions for calculation of circular cylindrical bearings, Corrigendum 1
4/1/2019 - PDF - German - DIN
Learn More€0.00 -
€0.00
-
DIN 808 Berichtigung 1:2019-04
Machine tools, cardan joints, sizes, connecting dimensions, loading, installation, Corrigendum 1
4/1/2019 - PDF - German - DIN
Learn More€0.00 -
DIN ISO 6547 Berichtigung 1:2019-04
Hydraulic fluid power-cylinder, piston seal housings incorporating bearing rings, dimensions and tolerances, Corrigendum 1
4/1/2019 - PDF - German - DIN
Learn More€0.00 -
DIN 31657-4 Berichtigung 1:2019-03
Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 4: Permissible operational parameters for calculation of multi-lobed and tilting pad journal bearings, Corrigendum 1
3/1/2019 - PDF - German - DIN
Learn More€0.00 -
€0.00
-
€0.00
-
VDI 2737 Berichtigung:2018-01
Calculation of the load capacity of the tooth root in internal toothings with influence of the gear rim - Corrigendum concerning standard VDI 2737:2016-12
1/1/2018 - PDF - English, German - VDI
Learn More€0.00 -
DIN ISO 965-2 Berichtigung 1:2017-03
ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads, medium quality (ISO 965-2:1998), Corrigendum to DIN ISO 965-2:1999-11
3/1/2017 - PDF - German - DIN
Learn More€0.00 -
DIN 8140-2 Berichtigung 1:2017-03
Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances, Corrigendum to DIN 8140-2:2005-08
3/1/2017 - PDF - German - DIN
Learn More€0.00 -
DIN 8140-2 Berichtigung 1:2017-03
Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances, Corrigendum to DIN 8140-2:2005-08
3/1/2017 - PDF - English - DIN
Learn More€0.00 -
€0.00 -
€0.00
-
€0.00
-
€0.00
-
€0.00
-
DIN 743-3 Berichtigung 1:2014-12
Calculation of load capacity of shafts and axles - Part 3: Strength of materials, Corrigendum to DIN 743-3:2012-12
12/1/2014 - PDF - German - DIN
Learn More€0.00 -
DIN 743-3 Berichtigung 1:2014-12
Calculation of load capacity of shafts and axles - Part 3: Strength of materials, Corrigendum to DIN 743-3:2012-12
12/1/2014 - PDF - English - DIN
Learn More€0.00 -
€0.00
-
€0.00
-
DIN 6892 Berichtigung 1:2014-05
Drive type fastenings without taper action - Parallel keys - Calculation and design, Corrigendum to DIN 6892:2012-08
5/1/2014 - PDF - German - DIN
Learn More€0.00 -
€0.00
-
ISO 898-1:2013/Cor 1:2013
Mechanical properties of fasteners made of carbon steel and alloy steel
Part 1: Bolts, screws and studs with specified property classes
4/4/2013 - Paper - English - ISO
Learn More€0.00 -
ISO 898-1:2013/Cor 1:2013
Mechanical properties of fasteners made of carbon steel and alloy steel
Part 1: Bolts, screws and studs with specified property classes
4/4/2013 - Paper - French - ISO
Learn More€0.00 -
ISO 7719:2012/Cor 1:2013
Prevailing torque type all-metal hexagon regular nuts
Property classes 5, 8 and 10
3/25/2013 - Paper - English - ISO
Learn More€0.00 -
ISO 7719:2012/Cor 1:2013
Prevailing torque type all-metal hexagon regular nuts
Property classes 5, 8 and 10
3/25/2013 - Paper - French - ISO
Learn More€0.00 -
€0.00
-
€0.00
-
€0.00
-
€0.00
-
€0.00
-
€0.00
-
€0.00
-
€0.00
-
€0.00
-
€0.00
-
€0.00
-
UNE-EN ISO 10684:2006/AC:2009
Fasteners - Hot dip galvanized coatings (ISO 10684:2004/Cor 1:2008)
10/14/2009 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN ISO 10684:2006/AC:2009
Fasteners - Hot dip galvanized coatings (ISO 10684:2004/Cor 1:2008)
10/14/2009 - PDF - English - AENOR
Learn More€0.00 -
€0.00
-
€0.00
-
ISO 1122-1:1998/Cor 2:2009
Vocabulary of gear terms
Part 1: Definitions related to geometry
6/2/2009 - Paper - English - ISO
Learn More€0.00 -
ISO 1122-1:1998/Cor 2:2009
Vocabulary of gear terms
Part 1: Definitions related to geometry
6/2/2009 - Paper - French - ISO
Learn More€0.00 -
ISO/TS 16281:2008/Cor 1:2009
Rolling bearings
Methods for calculating the modified reference rating life for universally loaded bearings
4/23/2009 - Paper - English - ISO
Learn More€0.00 -
ISO/TS 16281:2008/Cor 1:2009
Rolling bearings
Methods for calculating the modified reference rating life for universally loaded bearings
4/23/2009 - Paper - French - ISO
Learn More€0.00 -
DIN 5480-16 Berichtigung 1:2009-01
Involute splines based on reference diameters - Part 16: Tools, Corrigendum to DIN 5480-16:2006-03
1/1/2009 - PDF - German - DIN
Learn More€0.00 -
DIN 5480-16 Berichtigung 1:2009-01
Involute splines based on reference diameters - Part 16: Tools, Corrigendum 1 to English version of DIN 5480-16:2006-03
1/1/2009 - PDF - English - DIN
Learn More€0.00 -
DIN 5480-15 Berichtigung 1:2009-01
Involute splines based on reference diameters - Part 15: Inspection, Corrigendum to DIN 5480-15:2006-03
1/1/2009 - PDF - German - DIN
Learn More€0.00 -
DIN 5480-15 Berichtigung 1:2009-01
Involute splines based on reference diameters - Part 15: Inspection, Corrigendum 1 to English version of DIN 5480-15:2006-03
1/1/2009 - PDF - English - DIN
Learn More€0.00 -
DIN ISO 10823 Berichtigung 1:2009-01
Guidelines for the selection of roller chain drives (ISO 10823:2004), Corrigendum to DIN ISO 10823:2006-10 (ISO 10823:2004/Cor. 1:2008)
1/1/2009 - PDF - German - DIN
Learn More€0.00 -
DIN ISO 10823 Berichtigung 1:2009-01
Guidelines for the selection of roller chain drives (ISO 10823:2004), Corrigendum 1 to English version of DIN ISO 10823:2006-10
1/1/2009 - PDF - English - DIN
Learn More€0.00 -
€0.00
-
€0.00
-
€0.00
-
ISO 10823:2004/Cor 1:2008
Guidelines for the selection of roller chain drives
Technical Corrigendum 1
2/5/2008 - Paper - English - ISO
Learn More€0.00 -
ISO 10823:2004/Cor 1:2008
Guidelines for the selection of roller chain drives
Technical Corrigendum 1
2/5/2008 - Paper - French - ISO
Learn More€0.00 -
€0.00
-
UNE-EN 1662:1998/AC:2007
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
10/17/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 1662:1998/AC:2007
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
10/17/2007 - PDF - English - AENOR
Learn More€0.00 -
€0.00
-
€0.00
-
UNE-EN 14219:2004/AC:2007 (R2008)
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)
10/17/2007 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN 14219:2004/AC:2007 (R2008)
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)
10/17/2007 - PDF - English - AENOR
Learn More€0.00 -
ISO 7-1:1994/Cor 1:2007
Pipe threads where pressure-tight joints are made on the threads
Part 1: Dimensions, tolerances and designation
8/2/2007 - Paper - English - ISO
Learn More€0.00 -
ISO 7-1:1994/Cor 1:2007
Pipe threads where pressure-tight joints are made on the threads
Part 1: Dimensions, tolerances and designation
8/2/2007 - Paper - French - ISO
Learn More€0.00 -
DIN EN 1665 Berichtigung 1:2007-07
Hexagon bolts with flange, heavy series, German version EN 1665:1997, Corrigenda to DIN EN 1665:1998-11, German version EN 1665:1997/AC:2007
7/1/2007 - PDF - German - DIN
Learn More€0.00 -
DIN EN 1665 Berichtigung 1:2007-07
Hexagon bolts with flange, heavy series Corrigendum 1 to English version of DIN EN 1665:1998-11
7/1/2007 - PDF - English - DIN
Learn More€0.00 -
DIN 25201-7 Berichtigung 1:2007-06
Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation, Corrigenda to DIN 25201-7:2004-06
6/1/2007 - PDF - German - DIN
Learn More€0.00 -
DIN EN 1662 Berichtigung 1:2007-06
Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified), German version EN 1662:1997, Corrigenda to DIN EN 1662:1998-02, German version EN 1662:1997/AC:2007
6/1/2007 - PDF - German - DIN
Learn More€0.00 -
DIN EN 1662 Berichtigung 1:2007-06
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified) Corrigendum 1 to English version of DIN EN 1662:1998-02
6/1/2007 - PDF - English - DIN
Learn More€0.00 -
DIN EN 14219 Berichtigung 1:2007-06
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified), German version EN 14219:2003, Corrigenda to DIN EN 14219:2003-09, German version EN 14219:2003/AC:2007
6/1/2007 - PDF - German - DIN
Learn More€0.00 -
DIN EN 14219 Berichtigung 1:2007-06
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified) Corrigendum 1 to English version of DIN EN 14219:2003-09
6/1/2007 - PDF - English - DIN
Learn More€0.00 -
DIN EN 22341 Berichtigung 1:2007-05
Clevis pins with head (ISO 2341:1986), German version EN 22341:1992, Corrigenda to DIN EN 22341:1992-10
5/1/2007 - PDF - German - DIN
Learn More€0.00 -
DIN EN ISO 4027 Berichtigung 1:2007-04
Hexagon socket set screws with cone point (ISO 4027:2003), German version EN ISO 4027:2003, Corrigenda to DIN EN ISO 4027:2004-05
4/1/2007 - PDF - German - DIN
Learn More€0.00 -
DIN ISO 14635-1 Berichtigung 1:2007-03
Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000), Corrigenda to DIN ISO 14635-1:2006-05
3/1/2007 - PDF - German - DIN
Learn More€0.00 -
€0.00
-
DIN 6319 Berichtigung 1:2007-01
Spherical washers, conical seats, Corrigenda to DIN 6319:2001-10
1/1/2007 - PDF - German - DIN
Learn More€0.00 -
DIN 6319 Berichtigung 1:2007-01
Spherical washers, conical seats, Corrigendum 1 to English version of DIN 6319:2001-10
1/1/2007 - PDF - English - DIN
Learn More€0.00 -
DIN EN 10226-3 Berichtigung 1:2006-10
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges, German version EN 10226-3:2005, Corrigenda to DIN EN 10226-3:2005-05
10/1/2006 - PDF - German - DIN
Learn More€0.00 -
ISO/TR 10064-2:1996/Cor 2:2006
Code of inspection practice
Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
8/9/2006 - Paper - English - ISO
Learn More€0.00 -
ISO/TR 10064-2:1996/Cor 2:2006
Code of inspection practice
Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
8/9/2006 - Paper - French - ISO
Learn More€0.00 -
ISO/TR 10064-3:1996/Cor 1:2006
Code of inspection practice
Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
8/9/2006 - Paper - English - ISO
Learn More€0.00 -
ISO/TR 10064-3:1996/Cor 1:2006
Code of inspection practice
Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
8/9/2006 - Paper - French - ISO
Learn More€0.00 -
ISO/TR 10064-4:1998/Cor 1:2006
Code of inspection practice
Part 4: Recommendations relative to surface texture and tooth contact pattern checking
8/9/2006 - Paper - English - ISO
Learn More€0.00 -
ISO/TR 10064-4:1998/Cor 1:2006
Code of inspection practice
Part 4: Recommendations relative to surface texture and tooth contact pattern checking
8/9/2006 - Paper - French - ISO
Learn More€0.00 -
ISO/TR 10064-5:2005/Cor 1:2006
Code of inspection practice
Part 5: Recommendations relative to evaluation of gear measuring instruments
8/9/2006 - Paper - English - ISO
Learn More€0.00 -
ISO/TR 10064-5:2005/Cor 1:2006
Code of inspection practice
Part 5: Recommendations relative to evaluation of gear measuring instruments
8/9/2006 - Paper - French - ISO
Learn More€0.00 -
UNE-EN ISO 887:2000/AC:2006
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000/Cor. 1:2006)
4/19/2006 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN ISO 887:2000/AC:2006
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000/Cor. 1:2006)
4/19/2006 - PDF - English - AENOR
Learn More€0.00 -
DIN 82101 Berichtigung 1:2006-03
Components for lifting, towing, lashing - Shackle, dee - Non-alloy quality steel, Corrigenda to DIN 82101:2005-09
3/1/2006 - PDF - German - DIN
Learn More€0.00 -
ISO 887:2000/Cor 1:2006
Plain washers for metric bolts, screws and nuts for general purposes
General plan
2/7/2006 - Paper - English - ISO
Learn More€0.00 -
ISO 887:2000/Cor 1:2006
Plain washers for metric bolts, screws and nuts for general purposes
General plan
2/7/2006 - Paper - French - ISO
Learn More€0.00 -
UNE 17709:2004 ERRATUM
ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads.
3/26/2004 - PDF - Spanish - AENOR
Learn More€0.00 -
€0.00
-
JIS B 0209-3/ERRATUM 1:2002
ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads (Erratum 1)
1/1/2002 - PDF - Japanese - JSA
Learn More€0.00 -
JIS B 0209-5/ERRATUM 1:2002
ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (Erratum 1)
1/1/2002 - PDF - Japanese - JSA
Learn More€0.00 -
ISO/TR 10064-2:1996/Cor 1:2001
Code of inspection practice
Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
4/19/2001 - Paper - English - ISO
Learn More€0.00 -
ISO/TR 10064-2:1996/Cor 1:2001
Code of inspection practice
Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
4/19/2001 - Paper - French - ISO
Learn More€0.00 -
€0.00
-
€0.00
-
€0.00
-
€0.00
-
€0.00
-
JIS B 1081/ERRATUM 1:2000
Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results (Erratum 1)
1/1/2000 - PDF - Japanese - JSA
Learn More€0.00 -
ISO 1122-1:1998/Cor 1:1999
Vocabulary of gear terms
Part 1: Definitions related to geometry
11/11/1999 - Paper - English - ISO
Learn More€0.00 -
ISO 1122-1:1998/Cor 1:1999
Vocabulary of gear terms
Part 1: Definitions related to geometry
11/11/1999 - Paper - French - ISO
Learn More€0.00 -
ISO 12240-4:1998/Cor 1:1999
Spherical plain bearings
Part 4: Spherical plain bearing rod ends
8/5/1999 - Paper - English - ISO
Learn More€0.00 -
UNE-EN ISO 8745:1998 ERRATUM (R2008)
GROOVED PINS. HALF-LENGTH TAPER GROOVED. (ISO 8745:1997).
10/28/1998 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-EN ISO 2338:1998 ERRATUM (R2008)
PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENITIC STAINLESS STEEL. (ISO 2338:1997).
7/22/1998 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE 18172-1:1990 ERRATUM
SPHERICAL PLAIN RADIAL BEARINGS, JOINT TYPE. BOUNDARY DIMENSIONS. PART 1: DIMENSION SERIES E Y G.
7/24/1990 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE 18094:1990 ERRATUM
ROLLER BALL BEARINGS WITH FLANGED OUTER RING. FLANGE DIMENSIONS.
5/8/1990 - PDF - Spanish - AENOR
Learn More€0.00 -
€0.00
-
UNE 18091:1986 ERRATUM
NEEDLE ROLLER BEARINGS. LIGHT AND MEDIUM SERIES. DIMENSIONS AND TOLERANCES.
4/15/1986 - PDF - Spanish - AENOR
Learn More€0.00 -
€0.00
-
€0.00
-
€0.00
-
UNE 18036:1979 ERRATUM
ROLLER BEARING. ACCESORIES: LOCKWHASER WITH STRAIGHT OR BENT INNER TAB.
12/15/1979 - PDF - Spanish - AENOR
Learn More€0.00 -
€0.00
